mirror/mailcow-dockerized
2
0
Fork 0
mirror of https://github.com/mailcow/mailcow-dockerized.git synced 2024-11-21 03:14:00 +08:00
Code Issues Packages Projects Releases Wiki Activity
accedf0280
mailcow-dockerized/update.sh

1066 lines
48 KiB
Bash
Executable File
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/usr/bin/env bash
############## Begin Function Section ##############
check_online_status() {
CHECK_ONLINE_DOMAINS=('https://github.com' 'https://hub.docker.com')
for domain in "${CHECK_ONLINE_DOMAINS[@]}"; do
if timeout 6 curl --head --silent --output /dev/null ${domain}; then
return 0
fi
done
return 1
}
prefetch_images() {
[[ -z ${BRANCH} ]] && { echo -e "\e[33m\nUnknown branch...\e[0m"; exit 1; }
git fetch origin #${BRANCH}
while read image; do
if [[ "${image}" == "robbertkl/ipv6nat" ]]; then
if ! grep -qi "ipv6nat-mailcow" docker-compose.yml || grep -qi "enable_ipv6: false" docker-compose.yml; then
continue
fi
fi
RET_C=0
until docker pull ${image}; do
RET_C=$((RET_C + 1))
echo -e "\e[33m\nError pulling $image, retrying...\e[0m"
[ ${RET_C} -gt 3 ] && { echo -e "\e[31m\nToo many failed retries, exiting\e[0m"; exit 1; }
sleep 1
done
done < <(git show origin/${BRANCH}:docker-compose.yml | grep "image:" | awk '{ gsub("image:","", $3); print $2 }')
}
docker_garbage() {
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
IMGS_TO_DELETE=()
declare -A IMAGES_INFO
COMPOSE_IMAGES=($(grep -oP "image: \Kmailcow.+" "${SCRIPT_DIR}/docker-compose.yml"))
for existing_image in $(docker images --format "{{.ID}}:{{.Repository}}:{{.Tag}}" | grep 'mailcow/'); do
ID=$(echo $existing_image | cut -d ':' -f 1)
REPOSITORY=$(echo $existing_image | cut -d ':' -f 2)
TAG=$(echo $existing_image | cut -d ':' -f 3)
if [[ " ${COMPOSE_IMAGES[@]} " =~ " ${REPOSITORY}:${TAG} " ]]; then
continue
else
IMGS_TO_DELETE+=("$ID")
IMAGES_INFO["$ID"]="$REPOSITORY:$TAG"
fi
done
if [[ ! -z ${IMGS_TO_DELETE[*]} ]]; then
echo "The following unused mailcow images were found:"
for id in "${IMGS_TO_DELETE[@]}"; do
echo " ${IMAGES_INFO[$id]} ($id)"
done
if [ ! $FORCE ]; then
read -r -p "Do you want to delete them to free up some space? [y/N] " response
if [[ "$response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
docker rmi ${IMGS_TO_DELETE[*]}
else
echo "OK, skipped."
fi
else
echo "Running in forced mode! Force removing old mailcow images..."
docker rmi ${IMGS_TO_DELETE[*]}
fi
echo -e "\e[32mFurther cleanup...\e[0m"
echo "If you want to cleanup further garbage collected by Docker, please make sure all containers are up and running before cleaning your system by executing \"docker system prune\""
fi
}
in_array() {
local e match="$1"
shift
for e; do [[ "$e" == "$match" ]] && return 0; done
return 1
}
migrate_docker_nat() {
NAT_CONFIG='{"ipv6":true,"fixed-cidr-v6":"fd00:dead:beef:c0::/80","experimental":true,"ip6tables":true}'
# Min Docker version
DOCKERV_REQ=20.10.2
# Current Docker version
DOCKERV_CUR=$(docker version -f '{{.Server.Version}}')
if grep -qi "ipv6nat-mailcow" docker-compose.yml && grep -qi "enable_ipv6: true" docker-compose.yml; then
echo -e "\e[32mNative IPv6 implementation available.\e[0m"
echo "This will enable experimental features in the Docker daemon and configure Docker to do the IPv6 NATing instead of ipv6nat-mailcow."
echo '!!! This step is recommended !!!'
echo "mailcow will try to roll back the changes if starting Docker fails after modifying the daemon.json configuration file."
read -r -p "Should we try to enable the native IPv6 implementation in Docker now (recommended)? [y/N] " dockernatresponse
if [[ ! "${dockernatresponse}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
echo "OK, skipping this step."
return 0
fi
fi
# Sort versions and check if we are running a newer or equal version to req
if [ $(printf "${DOCKERV_REQ}\n${DOCKERV_CUR}" | sort -V | tail -n1) == "${DOCKERV_CUR}" ]; then
# If Dockerd daemon json exists
if [ -s /etc/docker/daemon.json ]; then
IFS=',' read -r -a dockerconfig <<< $(cat /etc/docker/daemon.json | tr -cd '[:alnum:],')
if ! in_array ipv6true "${dockerconfig[@]}" || \
! in_array experimentaltrue "${dockerconfig[@]}" || \
! in_array ip6tablestrue "${dockerconfig[@]}" || \
! grep -qi "fixed-cidr-v6" /etc/docker/daemon.json; then
echo -e "\e[33mWarning:\e[0m You seem to have modified the /etc/docker/daemon.json configuration by yourself and not fully/correctly activated the native IPv6 NAT implementation."
echo "You will need to merge your existing configuration manually or fix/delete the existing daemon.json configuration before trying the update process again."
echo -e "Please merge the following content and restart the Docker daemon:\n"
echo ${NAT_CONFIG}
return 1
fi
else
echo "Working on IPv6 NAT, please wait..."
echo ${NAT_CONFIG} > /etc/docker/daemon.json
ip6tables -F -t nat
[[ -e /etc/alpine-release ]] && rc-service docker restart || systemctl restart docker.service
if [[ $? -ne 0 ]]; then
echo -e "\e[31mError:\e[0m Failed to activate IPv6 NAT! Reverting and exiting."
rm /etc/docker/daemon.json
if [[ -e /etc/alpine-release ]]; then
rc-service docker restart
else
systemctl reset-failed docker.service
systemctl restart docker.service
fi
return 1
fi
fi
# Removing legacy container
sed -i '/ipv6nat-mailcow:$/,/^$/d' docker-compose.yml
if [ -s docker-compose.override.yml ]; then
sed -i '/ipv6nat-mailcow:$/,/^$/d' docker-compose.override.yml
if [[ "$(cat docker-compose.override.yml | sed '/^\s*$/d' | wc -l)" == "2" ]]; then
mv docker-compose.override.yml docker-compose.override.yml_backup
fi
fi
echo -e "\e[32mGreat! \e[0mNative IPv6 NAT is active.\e[0m"
else
echo -e "\e[31mPlease upgrade Docker to version ${DOCKERV_REQ} or above.\e[0m"
return 0
fi
}
remove_obsolete_nginx_ports() {
# Removing obsolete docker-compose.override.yml
for override in docker-compose.override.yml docker-compose.override.yaml; do
if [ -s $override ] ; then
if cat $override | grep nginx-mailcow > /dev/null 2>&1; then
if cat $override | grep -E '(\[::])' > /dev/null 2>&1; then
if cat $override | grep -w 80:80 > /dev/null 2>&1 && cat $override | grep -w 443:443 > /dev/null 2>&1 ; then
echo -e "\e[33mBacking up ${override} to preserve custom changes...\e[0m"
echo -e "\e[33m!!! Manual Merge needed (if other overrides are set) !!!\e[0m"
sleep 3
cp $override ${override}_backup
sed -i '/nginx-mailcow:$/,/^$/d' $override
echo -e "\e[33mRemoved obsolete NGINX IPv6 Bind from original override File.\e[0m"
if [[ "$(cat $override | sed '/^\s*$/d' | wc -l)" == "2" ]]; then
mv $override ${override}_empty
echo -e "\e[31m${override} is empty. Renamed it to ensure mailcow is startable.\e[0m"
fi
fi
fi
fi
fi
done
}
detect_docker_compose_command(){
if ! [[ "${DOCKER_COMPOSE_VERSION}" =~ ^(native|standalone)$ ]]; then
if docker compose > /dev/null 2>&1; then
if docker compose version --short | grep -e "^2." -e "^v2." > /dev/null 2>&1; then
DOCKER_COMPOSE_VERSION=native
COMPOSE_COMMAND="docker compose"
echo -e "\e[33mFound Docker Compose Plugin (native).\e[0m"
echo -e "\e[33mSetting the DOCKER_COMPOSE_VERSION Variable to native\e[0m"
sed -i 's/^DOCKER_COMPOSE_VERSION=.*/DOCKER_COMPOSE_VERSION=native/' $SCRIPT_DIR/mailcow.conf
sleep 2
echo -e "\e[33mNotice: You'll have to update this Compose Version via your Package Manager manually!\e[0m"
else
echo -e "\e[31mCannot find Docker Compose with a Version Higher than 2.X.X.\e[0m"
echo -e "\e[31mPlease update/install it manually regarding to this doc site: https://docs.mailcow.email/install/\e[0m"
exit 1
fi
elif docker-compose > /dev/null 2>&1; then
if ! [[ $(alias docker-compose 2> /dev/null) ]] ; then
if docker-compose version --short | grep "^2." > /dev/null 2>&1; then
DOCKER_COMPOSE_VERSION=standalone
COMPOSE_COMMAND="docker-compose"
echo -e "\e[33mFound Docker Compose Standalone.\e[0m"
echo -e "\e[33mSetting the DOCKER_COMPOSE_VERSION Variable to standalone\e[0m"
sed -i 's/^DOCKER_COMPOSE_VERSION=.*/DOCKER_COMPOSE_VERSION=standalone/' $SCRIPT_DIR/mailcow.conf
sleep 2
echo -e "\e[33mNotice: For an automatic update of docker-compose please use the update_compose.sh scripts located at the helper-scripts folder.\e[0m"
else
echo -e "\e[31mCannot find Docker Compose with a Version Higher than 2.X.X.\e[0m"
echo -e "\e[31mPlease update/install regarding to this doc site: https://docs.mailcow.email/install/\e[0m"
exit 1
fi
fi
else
echo -e "\e[31mCannot find Docker Compose.\e[0m"
echo -e "\e[31mPlease install it regarding to this doc site: https://docs.mailcow.email/install/\e[0m"
exit 1
fi
elif [ "${DOCKER_COMPOSE_VERSION}" == "native" ]; then
COMPOSE_COMMAND="docker compose"
# Check if Native Compose works and has not been deleted
if ! $COMPOSE_COMMAND > /dev/null 2>&1; then
# IF it not exists/work anymore try the other command
COMPOSE_COMMAND="docker-compose"
if ! $COMPOSE_COMMAND > /dev/null 2>&1 || ! $COMPOSE_COMMAND --version | grep "^2." > /dev/null 2>&1; then
# IF it cannot find Standalone in > 2.X, then script stops
echo -e "\e[31mCannot find Docker Compose or the Version is lower then 2.X.X.\e[0m"
echo -e "\e[31mPlease install it regarding to this doc site: https://docs.mailcow.email/install/\e[0m"
exit 1
fi
# If it finds the standalone Plugin it will use this instead and change the mailcow.conf Variable accordingly
echo -e "\e[31mFound different Docker Compose Version then declared in mailcow.conf!\e[0m"
echo -e "\e[31mSetting the DOCKER_COMPOSE_VERSION Variable from native to standalone\e[0m"
sed -i 's/^DOCKER_COMPOSE_VERSION=.*/DOCKER_COMPOSE_VERSION=standalone/' $SCRIPT_DIR/mailcow.conf
sleep 2
fi
elif [ "${DOCKER_COMPOSE_VERSION}" == "standalone" ]; then
COMPOSE_COMMAND="docker-compose"
# Check if Standalone Compose works and has not been deleted
if ! $COMPOSE_COMMAND > /dev/null 2>&1 && ! $COMPOSE_COMMAND --version > /dev/null 2>&1 | grep "^2." > /dev/null 2>&1; then
# IF it not exists/work anymore try the other command
COMPOSE_COMMAND="docker compose"
if ! $COMPOSE_COMMAND > /dev/null 2>&1; then
# IF it cannot find Native in > 2.X, then script stops
echo -e "\e[31mCannot find Docker Compose.\e[0m"
echo -e "\e[31mPlease install it regarding to this doc site: https://docs.mailcow.email/install/\e[0m"
exit 1
fi
# If it finds the native Plugin it will use this instead and change the mailcow.conf Variable accordingly
echo -e "\e[31mFound different Docker Compose Version then declared in mailcow.conf!\e[0m"
echo -e "\e[31mSetting the DOCKER_COMPOSE_VERSION Variable from standalone to native\e[0m"
sed -i 's/^DOCKER_COMPOSE_VERSION=.*/DOCKER_COMPOSE_VERSION=native/' $SCRIPT_DIR/mailcow.conf
sleep 2
fi
fi
}
detect_bad_asn() {
echo -e "\e[33mDetecting if your IP is listed on Spamhaus Bad ASN List...\e[0m"
response=$(curl --connect-timeout 15 --max-time 30 -s -o /dev/null -w "%{http_code}" "https://asn-check.mailcow.email")
if [ "$response" -eq 503 ]; then
if [ -z "$SPAMHAUS_DQS_KEY" ]; then
echo -e "\e[33mYour server's public IP uses an AS that is blocked by Spamhaus to use their DNS public blocklists for Postfix.\e[0m"
echo -e "\e[33mmailcow did not detected a value for the variable SPAMHAUS_DQS_KEY inside mailcow.conf!\e[0m"
sleep 2
echo ""
echo -e "\e[33mTo use the Spamhaus DNS Blocklists again, you will need to create a FREE account for their Data Query Service (DQS) at: https://www.spamhaus.com/free-trial/sign-up-for-a-free-data-query-service-account\e[0m"
echo -e "\e[33mOnce done, enter your DQS API key in mailcow.conf and mailcow will do the rest for you!\e[0m"
echo ""
sleep 2
else
echo -e "\e[33mYour server's public IP uses an AS that is blocked by Spamhaus to use their DNS public blocklists for Postfix.\e[0m"
echo -e "\e[32mmailcow detected a Value for the variable SPAMHAUS_DQS_KEY inside mailcow.conf. Postfix will use DQS with the given API key...\e[0m"
fi
elif [ "$response" -eq 200 ]; then
echo -e "\e[33mCheck completed! Your IP is \e[32mclean\e[0m"
elif [ "$response" -eq 429 ]; then
echo -e "\e[33mCheck completed! \e[31mYour IP seems to be rate limited on the ASN Check service... please try again later!\e[0m"
else
echo -e "\e[31mCheck failed! \e[0mMaybe a DNS or Network problem?\e[0m"
fi
}
############## End Function Section ##############
# Check permissions
if [ "$(id -u)" -ne "0" ]; then
echo "You need to be root"
exit 1
fi
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
# Run pre-update-hook
if [ -f "${SCRIPT_DIR}/pre_update_hook.sh" ]; then
bash "${SCRIPT_DIR}/pre_update_hook.sh"
fi
if [[ "$(uname -r)" =~ ^4\.15\.0-60 ]]; then
echo "DO NOT RUN mailcow ON THIS UBUNTU KERNEL!";
echo "Please update to 5.x or use another distribution."
exit 1
fi
if [[ "$(uname -r)" =~ ^4\.4\. ]]; then
if grep -q Ubuntu <<< $(uname -a); then
echo "DO NOT RUN mailcow ON THIS UBUNTU KERNEL!"
echo "Please update to linux-generic-hwe-16.04 by running \"apt-get install --install-recommends linux-generic-hwe-16.04\""
exit 1
fi
echo "mailcow on a 4.4.x kernel is not supported. It may or may not work, please upgrade your kernel or continue at your own risk."
read -p "Press any key to continue..." < /dev/tty
fi
# Exit on error and pipefail
set -o pipefail
# Setting high dc timeout
export COMPOSE_HTTP_TIMEOUT=600
# Add /opt/bin to PATH
PATH=$PATH:/opt/bin
umask 0022
# Unset COMPOSE_COMMAND and DOCKER_COMPOSE_VERSION Variable to be on the newest state.
unset COMPOSE_COMMAND
unset DOCKER_COMPOSE_VERSION
for bin in curl docker git awk sha1sum grep cut; do
if [[ -z $(command -v ${bin}) ]]; then
echo "Cannot find ${bin}, exiting..."
exit 1;
fi
done
export LC_ALL=C
DATE=$(date +%Y-%m-%d_%H_%M_%S)
BRANCH=$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD)
while (($#)); do
case "${1}" in
--check|-c)
echo "Checking remote code for updates..."
LATEST_REV=$(git ls-remote --exit-code --refs --quiet https://github.com/mailcow/mailcow-dockerized ${BRANCH} | cut -f1)
if [ $? -ne 0 ]; then
echo "A problem occurred while trying to fetch the latest revision from github."
exit 99
fi
if [[ -z $(git log HEAD --pretty=format:"%H" | grep "${LATEST_REV}") ]]; then
echo -e "Updated code is available.\nThe changes can be found here: https://github.com/mailcow/mailcow-dockerized/commits/master"
git log --date=short --pretty=format:"%ad - %s" $(git rev-parse --short HEAD)..origin/master
exit 0
else
echo "No updates available."
exit 3
fi
;;
--ours)
MERGE_STRATEGY=ours
;;
--skip-start)
SKIP_START=y
;;
--skip-ping-check)
SKIP_PING_CHECK=y
;;
--stable)
CURRENT_BRANCH="$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD)"
NEW_BRANCH="master"
;;
--gc)
echo -e "\e[32mCollecting garbage...\e[0m"
docker_garbage
exit 0
;;
--nightly)
CURRENT_BRANCH="$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD)"
NEW_BRANCH="nightly"
;;
--prefetch)
echo -e "\e[32mPrefetching images...\e[0m"
prefetch_images
exit 0
;;
-f|--force)
echo -e "\e[32mRunning in forced mode...\e[0m"
FORCE=y
;;
-d|--dev)
echo -e "\e[32mRunning in Developer mode...\e[0m"
DEV=y
;;
--help|-h)
echo './update.sh [-c|--check, --ours, --gc, --nightly, --prefetch, --skip-start, --skip-ping-check, --stable, -f|--force, -d|--dev, -h|--help]
-c|--check - Check for updates and exit (exit codes => 0: update available, 3: no updates)
--ours - Use merge strategy option "ours" to solve conflicts in favor of non-mailcow code (local changes over remote changes), not recommended!
--gc - Run garbage collector to delete old image tags
--nightly - Switch your mailcow updates to the unstable (nightly) branch. FOR TESTING PURPOSES ONLY!!!!
--prefetch - Only prefetch new images and exit (useful to prepare updates)
--skip-start - Do not start mailcow after update
--skip-ping-check - Skip ICMP Check to public DNS resolvers (Use it only if you´ve blocked any ICMP Connections to your mailcow machine)
--stable - Switch your mailcow updates to the stable (master) branch. Default unless you changed it with --nightly.
-f|--force - Force update, do not ask questions
-d|--dev - Enables Developer Mode (No Checkout of update.sh for tests)
'
exit 1
esac
shift
done
chmod 600 mailcow.conf
source mailcow.conf
detect_docker_compose_command
[[ ! -f mailcow.conf ]] && { echo "mailcow.conf is missing! Is mailcow installed?"; exit 1;}
DOTS=${MAILCOW_HOSTNAME//[^.]};
if [ ${#DOTS} -lt 1 ]; then
echo -e "\e[31mMAILCOW_HOSTNAME (${MAILCOW_HOSTNAME}) is not a FQDN!\e[0m"
sleep 1
echo "Please change it to a FQDN and redeploy the stack with $COMPOSE_COMMAND up -d"
exit 1
elif [[ "${MAILCOW_HOSTNAME: -1}" == "." ]]; then
echo "MAILCOW_HOSTNAME (${MAILCOW_HOSTNAME}) is ending with a dot. This is not a valid FQDN!"
exit 1
elif [ ${#DOTS} -eq 1 ]; then
echo -e "\e[33mMAILCOW_HOSTNAME (${MAILCOW_HOSTNAME}) does not contain a Subdomain. This is not fully tested and may cause issues.\e[0m"
echo "Find more information about why this message exists here: https://github.com/mailcow/mailcow-dockerized/issues/1572"
read -r -p "Do you want to proceed anyway? [y/N] " response
if [[ "$response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
echo "OK. Procceding."
else
echo "OK. Exiting."
exit 1
fi
fi
if grep --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox grep detected, please install gnu grep, \"apk add --no-cache --upgrade grep\""; exit 1; fi
# This will also cover sort
if cp --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox cp detected, please install coreutils, \"apk add --no-cache --upgrade coreutils\""; exit 1; fi
if sed --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox sed detected, please install gnu sed, \"apk add --no-cache --upgrade sed\""; exit 1; fi
CONFIG_ARRAY=(
"SKIP_LETS_ENCRYPT"
"SKIP_SOGO"
"USE_WATCHDOG"
"WATCHDOG_NOTIFY_EMAIL"
"WATCHDOG_NOTIFY_WEBHOOK"
"WATCHDOG_NOTIFY_WEBHOOK_BODY"
"WATCHDOG_NOTIFY_BAN"
"WATCHDOG_NOTIFY_START"
"WATCHDOG_EXTERNAL_CHECKS"
"WATCHDOG_SUBJECT"
"SKIP_CLAMD"
"SKIP_IP_CHECK"
"ADDITIONAL_SAN"
"DOVEADM_PORT"
"IPV4_NETWORK"
"IPV6_NETWORK"
"LOG_LINES"
"SNAT_TO_SOURCE"
"SNAT6_TO_SOURCE"
"COMPOSE_PROJECT_NAME"
"DOCKER_COMPOSE_VERSION"
"SQL_PORT"
"API_KEY"
"API_KEY_READ_ONLY"
"API_ALLOW_FROM"
"MAILDIR_GC_TIME"
"MAILDIR_SUB"
"ACL_ANYONE"
"SOLR_HEAP"
"SKIP_SOLR"
"ENABLE_SSL_SNI"
"ALLOW_ADMIN_EMAIL_LOGIN"
"SKIP_HTTP_VERIFICATION"
"SOGO_EXPIRE_SESSION"
"REDIS_PORT"
"DOVECOT_MASTER_USER"
"DOVECOT_MASTER_PASS"
"MAILCOW_PASS_SCHEME"
"ADDITIONAL_SERVER_NAMES"
"ACME_CONTACT"
"WATCHDOG_VERBOSE"
"WEBAUTHN_ONLY_TRUSTED_VENDORS"
"SPAMHAUS_DQS_KEY"
)
detect_bad_asn
sed -i --follow-symlinks '$a\' mailcow.conf
for option in ${CONFIG_ARRAY[@]}; do
if [[ ${option} == "ADDITIONAL_SAN" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "${option}=" >> mailcow.conf
fi
elif [[ ${option} == "COMPOSE_PROJECT_NAME" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "COMPOSE_PROJECT_NAME=mailcowdockerized" >> mailcow.conf
fi
elif [[ ${option} == "DOCKER_COMPOSE_VERSION" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "# Used Docker Compose version" >> mailcow.conf
echo "# Switch here between native (compose plugin) and standalone" >> mailcow.conf
echo "# For more informations take a look at the mailcow docs regarding the configuration options." >> mailcow.conf
echo "# Normally this should be untouched but if you decided to use either of those you can switch it manually here." >> mailcow.conf
echo "# Please be aware that at least one of those variants should be installed on your maschine or mailcow will fail." >> mailcow.conf
echo "" >> mailcow.conf
echo "DOCKER_COMPOSE_VERSION=${DOCKER_COMPOSE_VERSION}" >> mailcow.conf
fi
elif [[ ${option} == "DOVEADM_PORT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "DOVEADM_PORT=127.0.0.1:19991" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_NOTIFY_EMAIL" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "WATCHDOG_NOTIFY_EMAIL=" >> mailcow.conf
fi
elif [[ ${option} == "LOG_LINES" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Max log lines per service to keep in Redis logs' >> mailcow.conf
echo "LOG_LINES=9999" >> mailcow.conf
fi
elif [[ ${option} == "IPV4_NETWORK" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Internal IPv4 /24 subnet, format n.n.n. (expands to n.n.n.0/24)' >> mailcow.conf
echo "IPV4_NETWORK=172.22.1" >> mailcow.conf
fi
elif [[ ${option} == "IPV6_NETWORK" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Internal IPv6 subnet in fc00::/7' >> mailcow.conf
echo "IPV6_NETWORK=fd4d:6169:6c63:6f77::/64" >> mailcow.conf
fi
elif [[ ${option} == "SQL_PORT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Bind SQL to 127.0.0.1 on port 13306' >> mailcow.conf
echo "SQL_PORT=127.0.0.1:13306" >> mailcow.conf
fi
elif [[ ${option} == "API_KEY" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Create or override API key for web UI' >> mailcow.conf
echo "#API_KEY=" >> mailcow.conf
fi
elif [[ ${option} == "API_KEY_READ_ONLY" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Create or override read-only API key for web UI' >> mailcow.conf
echo "#API_KEY_READ_ONLY=" >> mailcow.conf
fi
elif [[ ${option} == "API_ALLOW_FROM" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Must be set for API_KEY to be active' >> mailcow.conf
echo '# IPs only, no networks (networks can be set via UI)' >> mailcow.conf
echo "#API_ALLOW_FROM=" >> mailcow.conf
fi
elif [[ ${option} == "SNAT_TO_SOURCE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Use this IPv4 for outgoing connections (SNAT)' >> mailcow.conf
echo "#SNAT_TO_SOURCE=" >> mailcow.conf
fi
elif [[ ${option} == "SNAT6_TO_SOURCE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Use this IPv6 for outgoing connections (SNAT)' >> mailcow.conf
echo "#SNAT6_TO_SOURCE=" >> mailcow.conf
fi
elif [[ ${option} == "MAILDIR_GC_TIME" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Garbage collector cleanup' >> mailcow.conf
echo '# Deleted domains and mailboxes are moved to /var/vmail/_garbage/timestamp_sanitizedstring' >> mailcow.conf
echo '# How long should objects remain in the garbage until they are being deleted? (value in minutes)' >> mailcow.conf
echo '# Check interval is hourly' >> mailcow.conf
echo 'MAILDIR_GC_TIME=1440' >> mailcow.conf
fi
elif [[ ${option} == "ACL_ANYONE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Set this to "allow" to enable the anyone pseudo user. Disabled by default.' >> mailcow.conf
echo '# When enabled, ACL can be created, that apply to "All authenticated users"' >> mailcow.conf
echo '# This should probably only be activated on mail hosts, that are used exclusivly by one organisation.' >> mailcow.conf
echo '# Otherwise a user might share data with too many other users.' >> mailcow.conf
echo 'ACL_ANYONE=disallow' >> mailcow.conf
fi
elif [[ ${option} == "SOLR_HEAP" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Solr heap size, there is no recommendation, please see Solr docs.' >> mailcow.conf
echo '# Solr is a prone to run OOM on large systems and should be monitored. Unmonitored Solr setups are not recommended.' >> mailcow.conf
echo '# Solr will refuse to start with total system memory below or equal to 2 GB.' >> mailcow.conf
echo "SOLR_HEAP=1024" >> mailcow.conf
fi
elif [[ ${option} == "SKIP_SOLR" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Solr is disabled by default after upgrading from non-Solr to Solr-enabled mailcows.' >> mailcow.conf
echo '# Disable Solr or if you do not want to store a readable index of your mails in solr-vol-1.' >> mailcow.conf
echo "SKIP_SOLR=y" >> mailcow.conf
fi
elif [[ ${option} == "ENABLE_SSL_SNI" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Create seperate certificates for all domains - y/n' >> mailcow.conf
echo '# this will allow adding more than 100 domains, but some email clients will not be able to connect with alternative hostnames' >> mailcow.conf
echo '# see https://wiki.dovecot.org/SSL/SNIClientSupport' >> mailcow.conf
echo "ENABLE_SSL_SNI=n" >> mailcow.conf
fi
elif [[ ${option} == "SKIP_SOGO" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Skip SOGo: Will disable SOGo integration and therefore webmail, DAV protocols and ActiveSync support (experimental, unsupported, not fully implemented) - y/n' >> mailcow.conf
echo "SKIP_SOGO=n" >> mailcow.conf
fi
elif [[ ${option} == "MAILDIR_SUB" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# MAILDIR_SUB defines a path in a users virtual home to keep the maildir in. Leave empty for updated setups.' >> mailcow.conf
echo "#MAILDIR_SUB=Maildir" >> mailcow.conf
echo "MAILDIR_SUB=" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_NOTIFY_WEBHOOK" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Send notifications to a webhook URL that receives a POST request with the content type "application/json".' >> mailcow.conf
echo '# You can use this to send notifications to services like Discord, Slack and others.' >> mailcow.conf
echo '#WATCHDOG_NOTIFY_WEBHOOK=https://discord.com/api/webhooks/XXXXXXXXXXXXXXXXXXX/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_NOTIFY_WEBHOOK_BODY" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# JSON body included in the webhook POST request. Needs to be in single quotes.' >> mailcow.conf
echo '# Following variables are available: SUBJECT, BODY' >> mailcow.conf
WEBHOOK_BODY='{"username": "mailcow Watchdog", "content": "**${SUBJECT}**\n${BODY}"}'
echo "#WATCHDOG_NOTIFY_WEBHOOK_BODY='${WEBHOOK_BODY}'" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_NOTIFY_BAN" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Notify about banned IP. Includes whois lookup.' >> mailcow.conf
echo "WATCHDOG_NOTIFY_BAN=y" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_NOTIFY_START" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Send a notification when the watchdog is started.' >> mailcow.conf
echo "WATCHDOG_NOTIFY_START=y" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_SUBJECT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Subject for watchdog mails. Defaults to "Watchdog ALERT" followed by the error message.' >> mailcow.conf
echo "#WATCHDOG_SUBJECT=" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_EXTERNAL_CHECKS" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Checks if mailcow is an open relay. Requires a SAL. More checks will follow.' >> mailcow.conf
echo '# No data is collected. Opt-in and anonymous.' >> mailcow.conf
echo '# Will only work with unmodified mailcow setups.' >> mailcow.conf
echo "WATCHDOG_EXTERNAL_CHECKS=n" >> mailcow.conf
fi
elif [[ ${option} == "SOGO_EXPIRE_SESSION" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# SOGo session timeout in minutes' >> mailcow.conf
echo "SOGO_EXPIRE_SESSION=480" >> mailcow.conf
fi
elif [[ ${option} == "REDIS_PORT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "REDIS_PORT=127.0.0.1:7654" >> mailcow.conf
fi
elif [[ ${option} == "DOVECOT_MASTER_USER" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# DOVECOT_MASTER_USER and _PASS must _both_ be provided. No special chars.' >> mailcow.conf
echo '# Empty by default to auto-generate master user and password on start.' >> mailcow.conf
echo '# User expands to DOVECOT_MASTER_USER@mailcow.local' >> mailcow.conf
echo '# LEAVE EMPTY IF UNSURE' >> mailcow.conf
echo "DOVECOT_MASTER_USER=" >> mailcow.conf
fi
elif [[ ${option} == "DOVECOT_MASTER_PASS" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# LEAVE EMPTY IF UNSURE' >> mailcow.conf
echo "DOVECOT_MASTER_PASS=" >> mailcow.conf
fi
elif [[ ${option} == "MAILCOW_PASS_SCHEME" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Password hash algorithm' >> mailcow.conf
echo '# Only certain password hash algorithm are supported. For a fully list of supported schemes,' >> mailcow.conf
echo '# see https://docs.mailcow.email/models/model-passwd/' >> mailcow.conf
echo "MAILCOW_PASS_SCHEME=BLF-CRYPT" >> mailcow.conf
fi
elif [[ ${option} == "ADDITIONAL_SERVER_NAMES" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Additional server names for mailcow UI' >> mailcow.conf
echo '#' >> mailcow.conf
echo '# Specify alternative addresses for the mailcow UI to respond to' >> mailcow.conf
echo '# This is useful when you set mail.* as ADDITIONAL_SAN and want to make sure mail.maildomain.com will always point to the mailcow UI.' >> mailcow.conf
echo '# If the server name does not match a known site, Nginx decides by best-guess and may redirect users to the wrong web root.' >> mailcow.conf
echo '# You can understand this as server_name directive in Nginx.' >> mailcow.conf
echo '# Comma separated list without spaces! Example: ADDITIONAL_SERVER_NAMES=a.b.c,d.e.f' >> mailcow.conf
echo 'ADDITIONAL_SERVER_NAMES=' >> mailcow.conf
fi
elif [[ ${option} == "ACME_CONTACT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Lets Encrypt registration contact information' >> mailcow.conf
echo '# Optional: Leave empty for none' >> mailcow.conf
echo '# This value is only used on first order!' >> mailcow.conf
echo '# Setting it at a later point will require the following steps:' >> mailcow.conf
echo '# https://docs.mailcow.email/troubleshooting/debug-reset_tls/' >> mailcow.conf
echo 'ACME_CONTACT=' >> mailcow.conf
fi
elif [[ ${option} == "WEBAUTHN_ONLY_TRUSTED_VENDORS" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "# WebAuthn device manufacturer verification" >> mailcow.conf
echo '# After setting WEBAUTHN_ONLY_TRUSTED_VENDORS=y only devices from trusted manufacturers are allowed' >> mailcow.conf
echo '# root certificates can be placed for validation under mailcow-dockerized/data/web/inc/lib/WebAuthn/rootCertificates' >> mailcow.conf
echo 'WEBAUTHN_ONLY_TRUSTED_VENDORS=n' >> mailcow.conf
fi
elif [[ ${option} == "SPAMHAUS_DQS_KEY" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "# Spamhaus Data Query Service Key" >> mailcow.conf
echo '# Optional: Leave empty for none' >> mailcow.conf
echo '# Enter your key here if you are using a blocked ASN (OVH, AWS, Cloudflare e.g) for the unregistered Spamhaus Blocklist.' >> mailcow.conf
echo '# If empty, it will completely disable Spamhaus blocklists if it detects that you are running on a server using a blocked AS.' >> mailcow.conf
echo '# Otherwise it will work as usual.' >> mailcow.conf
echo 'SPAMHAUS_DQS_KEY=' >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_VERBOSE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Enable watchdog verbose logging' >> mailcow.conf
echo 'WATCHDOG_VERBOSE=n' >> mailcow.conf
fi
elif ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "${option}=n" >> mailcow.conf
fi
done
if [[( ${SKIP_PING_CHECK} == "y")]]; then
echo -e "\e[32mSkipping Ping Check...\e[0m"
else
echo -en "Checking internet connection... "
if ! check_online_status; then
echo -e "\e[31mfailed\e[0m"
exit 1
else
echo -e "\e[32mOK\e[0m"
fi
fi
if ! [ $NEW_BRANCH ]; then
echo -e "\e[33mDetecting which build your mailcow runs on...\e[0m"
sleep 1
if [ ${BRANCH} == "master" ]; then
echo -e "\e[32mYou are receiving stable updates (master).\e[0m"
echo -e "\e[33mTo change that run the update.sh Script one time with the --nightly parameter to switch to nightly builds.\e[0m"
elif [ ${BRANCH} == "nightly" ]; then
echo -e "\e[31mYou are receiving unstable updates (nightly). These are for testing purposes only!!!\e[0m"
sleep 1
echo -e "\e[33mTo change that run the update.sh Script one time with the --stable parameter to switch to stable builds.\e[0m"
else
echo -e "\e[33mYou are receiving updates from a unsupported branch.\e[0m"
sleep 1
echo -e "\e[33mThe mailcow stack might still work but it is recommended to switch to the master branch (stable builds).\e[0m"
echo -e "\e[33mTo change that run the update.sh Script one time with the --stable parameter to switch to stable builds.\e[0m"
fi
elif [ $FORCE ]; then
echo -e "\e[31mYou are running in forced mode!\e[0m"
echo -e "\e[31mA Branch Switch can only be performed manually (monitored).\e[0m"
echo -e "\e[31mPlease rerun the update.sh Script without the --force/-f parameter.\e[0m"
sleep 1
elif [ $NEW_BRANCH == "master" ] && [ $CURRENT_BRANCH != "master" ]; then
echo -e "\e[33mYou are about to switch your mailcow Updates to the stable (master) branch.\e[0m"
sleep 1
echo -e "\e[33mBefore you do: Please take a backup of all components to ensure that no Data is lost...\e[0m"
sleep 1
echo -e "\e[31mWARNING: Please see on GitHub or ask in the communitys if a switch to master is stable or not.
In some rear cases a Update back to master can destroy your mailcow configuration in case of Database Upgrades etc.
Normally a upgrade back to master should be safe during each full release.
Check GitHub for Database Changes and Update only if there similar to the full release!\e[0m"
read -r -p "Are you sure you that want to continue upgrading to the stable (master) branch? [y/N] " response
if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
echo "OK. If you prepared yourself for that please run the update.sh Script with the --stable parameter again to trigger this process here."
exit 0
fi
BRANCH=$NEW_BRANCH
DIFF_DIRECTORY=update_diffs
DIFF_FILE=${DIFF_DIRECTORY}/diff_before_upgrade_to_master_$(date +"%Y-%m-%d-%H-%M-%S")
mv diff_before_upgrade* ${DIFF_DIRECTORY}/ 2> /dev/null
if ! git diff-index --quiet HEAD; then
echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m"
mkdir -p ${DIFF_DIRECTORY}
git diff ${BRANCH} --stat > ${DIFF_FILE}
git diff ${BRANCH} >> ${DIFF_FILE}
fi
echo -e "\e[32mSwitching Branch to ${BRANCH}...\e[0m"
git fetch origin
git checkout -f ${BRANCH}
elif [ $NEW_BRANCH == "nightly" ] && [ $CURRENT_BRANCH != "nightly" ]; then
echo -e "\e[33mYou are about to switch your mailcow Updates to the unstable (nightly) branch.\e[0m"
sleep 1
echo -e "\e[33mBefore you do: Please take a backup of all components to ensure that no Data is lost...\e[0m"
sleep 1
echo -e "\e[31mWARNING: A switch to nightly is possible any time. But a switch back (to master) isn't.\e[0m"
read -r -p "Are you sure you that want to continue upgrading to the unstable (nightly) branch? [y/N] " response
if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
echo "OK. If you prepared yourself for that please run the update.sh Script with the --nightly parameter again to trigger this process here."
exit 0
fi
BRANCH=$NEW_BRANCH
DIFF_DIRECTORY=update_diffs
DIFF_FILE=${DIFF_DIRECTORY}/diff_before_upgrade_to_nightly_$(date +"%Y-%m-%d-%H-%M-%S")
mv diff_before_upgrade* ${DIFF_DIRECTORY}/ 2> /dev/null
if ! git diff-index --quiet HEAD; then
echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m"
mkdir -p ${DIFF_DIRECTORY}
git diff ${BRANCH} --stat > ${DIFF_FILE}
git diff ${BRANCH} >> ${DIFF_FILE}
fi
git fetch origin
git checkout -f ${BRANCH}
fi
if [ ! $DEV ]; then
echo -e "\e[32mChecking for newer update script...\e[0m"
SHA1_1=$(sha1sum update.sh)
git fetch origin #${BRANCH}
git checkout origin/${BRANCH} update.sh
SHA1_2=$(sha1sum update.sh)
if [[ ${SHA1_1} != ${SHA1_2} ]]; then
echo "update.sh changed, please run this script again, exiting."
chmod +x update.sh
exit 2
fi
fi
if [ ! $FORCE ]; then
read -r -p "Are you sure you want to update mailcow: dockerized? All containers will be stopped. [y/N] " response
if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
echo "OK, exiting."
exit 0
fi
migrate_docker_nat
fi
remove_obsolete_nginx_ports
echo -e "\e[32mValidating docker-compose stack configuration...\e[0m"
sed -i 's/HTTPS_BIND:-:/HTTPS_BIND:-/g' docker-compose.yml
sed -i 's/HTTP_BIND:-:/HTTP_BIND:-/g' docker-compose.yml
if ! $COMPOSE_COMMAND config -q; then
echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m"
exit 1
fi
echo -e "\e[32mChecking for conflicting bridges...\e[0m"
MAILCOW_BRIDGE=$($COMPOSE_COMMAND config | grep -i com.docker.network.bridge.name | cut -d':' -f2)
while read NAT_ID; do
iptables -t nat -D POSTROUTING $NAT_ID
done < <(iptables -L -vn -t nat --line-numbers | grep $IPV4_NETWORK | grep -E 'MASQUERADE.*all' | grep -v ${MAILCOW_BRIDGE} | cut -d' ' -f1)
DIFF_DIRECTORY=update_diffs
DIFF_FILE=${DIFF_DIRECTORY}/diff_before_update_$(date +"%Y-%m-%d-%H-%M-%S")
mv diff_before_update* ${DIFF_DIRECTORY}/ 2> /dev/null
if ! git diff-index --quiet HEAD; then
echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m"
mkdir -p ${DIFF_DIRECTORY}
git diff --stat > ${DIFF_FILE}
git diff >> ${DIFF_FILE}
fi
echo -e "\e[32mPrefetching images...\e[0m"
prefetch_images
echo -e "\e[32mStopping mailcow...\e[0m"
sleep 2
MAILCOW_CONTAINERS=($($COMPOSE_COMMAND ps -q))
$COMPOSE_COMMAND down
echo -e "\e[32mChecking for remaining containers...\e[0m"
sleep 2
for container in "${MAILCOW_CONTAINERS[@]}"; do
docker rm -f "$container" 2> /dev/null
done
[[ -f data/conf/nginx/ZZZ-ejabberd.conf ]] && rm data/conf/nginx/ZZZ-ejabberd.conf
# Silently fixing remote url from andryyy to mailcow
# git remote set-url origin https://github.com/mailcow/mailcow-dockerized
DEFAULT_REPO=https://github.com/mailcow/mailcow-dockerized
CURRENT_REPO=$(git config --get remote.origin.url)
if [ "$CURRENT_REPO" != "$DEFAULT_REPO" ]; then
echo "The Repository currently used is not the default Mailcow Repository."
echo "Currently Repository: $CURRENT_REPO"
echo "Default Repository: $DEFAULT_REPO"
if [ ! $FORCE ]; then
read -r -p "Should it be changed back to default? [y/N] " repo_response
if [[ "$repo_response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
git remote set-url origin $DEFAULT_REPO
fi
else
echo "Running in forced mode... setting Repo to default!"
git remote set-url origin $DEFAULT_REPO
fi
fi
if [ ! $DEV ]; then
echo -e "\e[32mCommitting current status...\e[0m"
[[ -z "$(git config user.name)" ]] && git config user.name moo
[[ -z "$(git config user.email)" ]] && git config user.email moo@cow.moo
[[ ! -z $(git ls-files data/conf/rspamd/override.d/worker-controller-password.inc) ]] && git rm data/conf/rspamd/override.d/worker-controller-password.inc
git add -u
git commit -am "Before update on ${DATE}" > /dev/null
echo -e "\e[32mFetching updated code from remote...\e[0m"
git fetch origin #${BRANCH}
echo -e "\e[32mMerging local with remote code (recursive, strategy: \"${MERGE_STRATEGY:-theirs}\", options: \"patience\"...\e[0m"
git config merge.defaultToUpstream true
git merge -X${MERGE_STRATEGY:-theirs} -Xpatience -m "After update on ${DATE}"
# Need to use a variable to not pass return codes of if checks
MERGE_RETURN=$?
if [[ ${MERGE_RETURN} == 128 ]]; then
echo -e "\e[31m\nOh no, what happened?\n=> You most likely added files to your local mailcow instance that were now added to the official mailcow repository. Please move them to another location before updating mailcow.\e[0m"
exit 1
elif [[ ${MERGE_RETURN} == 1 ]]; then
echo -e "\e[93mPotenial conflict, trying to fix...\e[0m"
git status --porcelain | grep -E "UD|DU" | awk '{print $2}' | xargs rm -v
git add -A
git commit -m "After update on ${DATE}" > /dev/null
git checkout .
echo -e "\e[32mRemoved and recreated files if necessary.\e[0m"
elif [[ ${MERGE_RETURN} != 0 ]]; then
echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m"
echo
echo "Run $COMPOSE_COMMAND up -d to restart your stack without updates or try again after fixing the mentioned errors."
exit 1
fi
elif [ $DEV ]; then
echo -e "\e[33mDEVELOPER MODE: Not creating a git diff and commiting it to prevent development stuff within a backup diff...\e[0m"
fi
echo -e "\e[32mFetching new images, if any...\e[0m"
sleep 2
$COMPOSE_COMMAND pull
# Fix missing SSL, does not overwrite existing files
[[ ! -d data/assets/ssl ]] && mkdir -p data/assets/ssl
cp -n -d data/assets/ssl-example/*.pem data/assets/ssl/
echo -e "Checking IPv6 settings... "
if grep -q 'SYSCTL_IPV6_DISABLED=1' mailcow.conf; then
echo
echo '!! IMPORTANT !!'
echo
echo 'SYSCTL_IPV6_DISABLED was removed due to complications. IPv6 can be disabled by editing "docker-compose.yml" and setting "enable_ipv6: true" to "enable_ipv6: false".'
echo "This setting will only be active after a complete shutdown of mailcow by running $COMPOSE_COMMAND down followed by $COMPOSE_COMMAND up -d."
echo
echo '!! IMPORTANT !!'
echo
read -p "Press any key to continue..." < /dev/tty
fi
# Checking for old project name bug
sed -i --follow-symlinks 's#COMPOSEPROJECT_NAME#COMPOSE_PROJECT_NAME#g' mailcow.conf
# Fix Rspamd maps
if [ -f data/conf/rspamd/custom/global_from_blacklist.map ]; then
mv data/conf/rspamd/custom/global_from_blacklist.map data/conf/rspamd/custom/global_smtp_from_blacklist.map
fi
if [ -f data/conf/rspamd/custom/global_from_whitelist.map ]; then
mv data/conf/rspamd/custom/global_from_whitelist.map data/conf/rspamd/custom/global_smtp_from_whitelist.map
fi
# Fix deprecated metrics.conf
if [ -f "data/conf/rspamd/local.d/metrics.conf" ]; then
if [ ! -z "$(git diff --name-only origin/master data/conf/rspamd/local.d/metrics.conf)" ]; then
echo -e "\e[33mWARNING\e[0m - Please migrate your customizations of data/conf/rspamd/local.d/metrics.conf to actions.conf and groups.conf after this update."
echo "The deprecated configuration file metrics.conf will be moved to metrics.conf_deprecated after updating mailcow."
fi
mv data/conf/rspamd/local.d/metrics.conf data/conf/rspamd/local.d/metrics.conf_deprecated
fi
# Set app_info.inc.php
if [ ${BRANCH} == "master" ]; then
mailcow_git_version=$(git describe --tags `git rev-list --tags --max-count=1`)
elif [ ${BRANCH} == "nightly" ]; then
mailcow_git_version=$(git rev-parse --short $(git rev-parse @{upstream}))
mailcow_last_git_version=""
else
mailcow_git_version=$(git rev-parse --short HEAD)
mailcow_last_git_version=""
fi
mailcow_git_commit=$(git rev-parse origin/${BRANCH})
mailcow_git_commit_date=$(git log -1 --format=%ci @{upstream} )
if [ $? -eq 0 ]; then
echo '<?php' > data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_VERSION="'$mailcow_git_version'";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_LAST_GIT_VERSION="";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_OWNER="mailcow";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_REPO="mailcow-dockerized";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_URL="https://github.com/mailcow/mailcow-dockerized";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_COMMIT="'$mailcow_git_commit'";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_COMMIT_DATE="'$mailcow_git_commit_date'";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_BRANCH="'$BRANCH'";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_UPDATEDAT='$(date +%s)';' >> data/web/inc/app_info.inc.php
echo '?>' >> data/web/inc/app_info.inc.php
else
echo '<?php' > data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_VERSION="'$mailcow_git_version'";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_LAST_GIT_VERSION="";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_OWNER="mailcow";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_REPO="mailcow-dockerized";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_URL="https://github.com/mailcow/mailcow-dockerized";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_COMMIT="";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_GIT_COMMIT_DATE="";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_BRANCH="'$BRANCH'";' >> data/web/inc/app_info.inc.php
echo ' $MAILCOW_UPDATEDAT='$(date +%s)';' >> data/web/inc/app_info.inc.php
echo '?>' >> data/web/inc/app_info.inc.php
echo -e "\e[33mCannot determine current git repository version...\e[0m"
fi
if [[ ${SKIP_START} == "y" ]]; then
echo -e "\e[33mNot starting mailcow, please run \"$COMPOSE_COMMAND up -d --remove-orphans\" to start mailcow.\e[0m"
else
echo -e "\e[32mStarting mailcow...\e[0m"
sleep 2
$COMPOSE_COMMAND up -d --remove-orphans
fi
echo -e "\e[32mCollecting garbage...\e[0m"
docker_garbage
# Run post-update-hook
if [ -f "${SCRIPT_DIR}/post_update_hook.sh" ]; then
bash "${SCRIPT_DIR}/post_update_hook.sh"
fi
# echo "In case you encounter any problem, hard-reset to a state before updating mailcow:"
# echo
# git reflog --color=always | grep "Before update on "
# echo
# echo "Use \"git reset --hard hash-on-the-left\" and run $COMPOSE_COMMAND up -d afterwards."
Reference in New Issue View Git Blame Copy Permalink