mirror/mailcow-dockerized
2
0
Fork 0
mirror of https://github.com/mailcow/mailcow-dockerized.git synced 2024-12-27 09:19:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
40dda01d91
mailcow-dockerized/update.sh
andryyy c612f7ee4c
[Config] Add SKIP_HTTP_VERIFICATION
2019-03-29 07:48:31 +01:00

405 lines
16 KiB
Bash
Executable File
Raw Blame History

#!/usr/bin/env bash
# Check permissions
if [ "$(id -u)" -ne "0" ]; then
echo "You need to be root"
exit 1
fi
# Exit on error and pipefail
set -o pipefail
# Add /opt/bin to PATH
PATH=$PATH:/opt/bin
umask 0022
for bin in curl docker-compose docker git awk sha1sum; do
if [[ -z $(which ${bin}) ]]; then echo "Cannot find ${bin}, exiting..."; exit 1; fi
done
export LC_ALL=C
DATE=$(date +%Y-%m-%d_%H_%M_%S)
BRANCH=$(git rev-parse --abbrev-ref HEAD)
docker_garbage() {
IMGS_TO_DELETE=()
for container in $(grep -oP "image: \Kmailcow.+" docker-compose.yml); do
REPOSITORY=${container/:*}
TAG=${container/*:}
V_MAIN=${container/*.}
V_SUB=${container/*.}
EXISTING_TAGS=$(docker images | grep ${REPOSITORY} | awk '{ print $2 }')
for existing_tag in ${EXISTING_TAGS[@]}; do
V_MAIN_EXISTING=${existing_tag/*.}
V_SUB_EXISTING=${existing_tag/*.}
# Not an integer
[[ ! $V_MAIN_EXISTING =~ ^[0-9]+$ ]] && continue
[[ ! $V_SUB_EXISTING =~ ^[0-9]+$ ]] && continue
if [[ $V_MAIN_EXISTING == "latest" ]]; then
echo "Found deprecated label \"latest\" for repository $REPOSITORY, it should be deleted."
IMGS_TO_DELETE+=($REPOSITORY:$existing_tag)
elif [[ $V_MAIN_EXISTING -lt $V_MAIN ]]; then
echo "Found tag $existing_tag for $REPOSITORY, which is older than the current tag $TAG and should be deleted."
IMGS_TO_DELETE+=($REPOSITORY:$existing_tag)
elif [[ $V_SUB_EXISTING -lt $V_SUB ]]; then
echo "Found tag $existing_tag for $REPOSITORY, which is older than the current tag $TAG and should be deleted."
IMGS_TO_DELETE+=($REPOSITORY:$existing_tag)
fi
done
done
if [[ ! -z ${IMGS_TO_DELETE[*]} ]]; then
echo "Run the following command to delete unused image tags:"
echo
echo " docker rmi ${IMGS_TO_DELETE[*]}"
echo
read -r -p "Do you want to delete old image tags right now? [y/N] " response
if [[ "$response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
docker rmi ${IMGS_TO_DELETE[*]}
else
echo "OK, skipped."
fi
fi
echo -e "\e[32mFurther cleanup...\e[0m"
echo "If you want to cleanup further garbage collected by Docker, please make sure all containers are up and running before cleaning your system by executing \"docker system prune\""
}
while (($#)); do
case "${1}" in
--check|-c)
echo "Checking remote code for updates..."
LATEST_REV=$(git ls-remote --exit-code --refs --quiet https://github.com/mailcow/mailcow-dockerized ${BRANCH} | cut -f1)
if [ $? -ne 0 ]; then
echo "A problem occurred while trying to fetch the latest revision from github."
exit 99
fi
if [[ -z $(git log HEAD --pretty=format:"%H" | grep "${LATEST_REV}") ]]; then
echo "Updated code is available."
exit 0
else
echo "No updates available."
exit 3
fi
;;
--ours)
MERGE_STRATEGY=ours
;;
--gc)
echo -e "\e[32mCollecting garbage...\e[0m"
docker_garbage
exit 0
;;
--help|-h)
echo './update.sh [-c|--check, --ours, --gc, -h|--help]
-c|--check - Check for updates and exit (exit codes => 0: update available, 3: no updates)
--ours - Use merge strategy "ours" to solve conflicts in favor of non-mailcow code (local changes)
--gc - Run garbage collector to delete old image tags
'
exit 1
esac
shift
done
[[ ! -f mailcow.conf ]] && { echo "mailcow.conf is missing"; exit 1;}
chmod 600 mailcow.conf
source mailcow.conf
DOTS=${MAILCOW_HOSTNAME//[^.]};
if [ ${#DOTS} -lt 2 ]; then
echo "MAILCOW_HOSTNAME (${MAILCOW_HOSTNAME}) is not a FQDN!"
echo "Please change it to a FQDN and run docker-compose down followed by docker-compose up -d"
exit 1
fi
if grep --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusybBox grep detected, please install gnu grep, \"apk add --no-cache --upgrade grep\""; exit 1; fi
if cp --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusybBox cp detected, please install coreutils, \"apk add --no-cache --upgrade coreutils\""; exit 1; fi
CONFIG_ARRAY=(
"SKIP_LETS_ENCRYPT"
"USE_WATCHDOG"
"WATCHDOG_NOTIFY_EMAIL"
"SKIP_CLAMD"
"SKIP_IP_CHECK"
"ADDITIONAL_SAN"
"DOVEADM_PORT"
"IPV4_NETWORK"
"IPV6_NETWORK"
"LOG_LINES"
"SNAT_TO_SOURCE"
"SNAT6_TO_SOURCE"
"COMPOSE_PROJECT_NAME"
"SQL_PORT"
"API_KEY"
"API_ALLOW_FROM"
"MAILDIR_GC_TIME"
"MAILDIR_SUB"
"ACL_ANYONE"
"SOLR_HEAP"
"SKIP_SOLR"
"SKIP_HTTP_VERIFICATION"
)
sed -i '$a\' mailcow.conf
for option in ${CONFIG_ARRAY[@]}; do
if [[ ${option} == "ADDITIONAL_SAN" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "${option}=" >> mailcow.conf
fi
elif [[ ${option} == "COMPOSE_PROJECT_NAME" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "COMPOSE_PROJECT_NAME=mailcowdockerized" >> mailcow.conf
fi
elif [[ ${option} == "DOVEADM_PORT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "DOVEADM_PORT=127.0.0.1:19991" >> mailcow.conf
fi
elif [[ ${option} == "WATCHDOG_NOTIFY_EMAIL" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "WATCHDOG_NOTIFY_EMAIL=" >> mailcow.conf
fi
elif [[ ${option} == "LOG_LINES" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Max log lines per service to keep in Redis logs' >> mailcow.conf
echo "LOG_LINES=9999" >> mailcow.conf
fi
elif [[ ${option} == "IPV4_NETWORK" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Internal IPv4 /24 subnet, format n.n.n. (expands to n.n.n.0/24)' >> mailcow.conf
echo "IPV4_NETWORK=172.22.1" >> mailcow.conf
fi
elif [[ ${option} == "IPV6_NETWORK" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Internal IPv6 subnet in fc00::/7' >> mailcow.conf
echo "IPV6_NETWORK=fd4d:6169:6c63:6f77::/64" >> mailcow.conf
fi
elif [[ ${option} == "SQL_PORT" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Bind SQL to 127.0.0.1 on port 13306' >> mailcow.conf
echo "SQL_PORT=127.0.0.1:13306" >> mailcow.conf
fi
elif [[ ${option} == "API_KEY" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Create or override API key for web UI' >> mailcow.conf
echo "#API_KEY=" >> mailcow.conf
fi
elif [[ ${option} == "API_ALLOW_FROM" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Must be set for API_KEY to be active' >> mailcow.conf
echo "#API_ALLOW_FROM=" >> mailcow.conf
fi
elif [[ ${option} == "SNAT_TO_SOURCE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Use this IPv4 for outgoing connections (SNAT)' >> mailcow.conf
echo "#SNAT_TO_SOURCE=" >> mailcow.conf
fi
elif [[ ${option} == "SNAT6_TO_SOURCE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Use this IPv6 for outgoing connections (SNAT)' >> mailcow.conf
echo "#SNAT6_TO_SOURCE=" >> mailcow.conf
fi
elif [[ ${option} == "MAILDIR_GC_TIME" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Garbage collector cleanup' >> mailcow.conf
echo '# Deleted domains and mailboxes are moved to /var/vmail/_garbage/timestamp_sanitizedstring' >> mailcow.conf
echo '# How long should objects remain in the garbage until they are being deleted? (value in minutes)' >> mailcow.conf
echo '# Check interval is hourly' >> mailcow.conf
echo 'MAILDIR_GC_TIME=1440' >> mailcow.conf
fi
elif [[ ${option} == "ACL_ANYONE" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Set this to "allow" to enable the anyone pseudo user. Disabled by default.' >> mailcow.conf
echo '# When enabled, ACL can be created, that apply to "All authenticated users"' >> mailcow.conf
echo '# This should probably only be activated on mail hosts, that are used exclusivly by one organisation.' >> mailcow.conf
echo '# Otherwise a user might share data with too many other users.' >> mailcow.conf
echo 'ACL_ANYONE=disallow' >> mailcow.conf
fi
elif [[ ${option} == "SOLR_HEAP" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Solr heap size, there is no recommendation, please see Solr docs.' >> mailcow.conf
echo '# Solr is a prone to run OOM on large systems and should be monitored. Unmonitored Solr setups are not recommended.' >> mailcow.conf
echo '# Solr will refuse to start with total system memory below or equal to 2 GB.' >> mailcow.conf
echo "SOLR_HEAP=1024" >> mailcow.conf
fi
elif [[ ${option} == "SKIP_SOLR" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# Solr is disabled by default after upgrading from non-Solr to Solr-enabled mailcows.' >> mailcow.conf
echo '# Disable Solr or if you do not want to store a readable index of your mails in solr-vol-1.' >> mailcow.conf
echo "SKIP_SOLR=y" >> mailcow.conf
fi
elif [[ ${option} == "MAILDIR_SUB" ]]; then
if ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo '# MAILDIR_SUB defines a path in a users virtual home to keep the maildir in. Leave empty for updated setups.' >> mailcow.conf
echo "#MAILDIR_SUB=Maildir" >> mailcow.conf
echo "MAILDIR_SUB=" >> mailcow.conf
fi
elif ! grep -q ${option} mailcow.conf; then
echo "Adding new option \"${option}\" to mailcow.conf"
echo "${option}=n" >> mailcow.conf
fi
done
echo -en "Checking internet connection... "
curl -o /dev/null 1.1.1.1 -sm3
if [[ $? != 0 ]]; then
echo -e "\e[31mfailed\e[0m"
exit 1
else
echo -e "\e[32mOK\e[0m"
fi
echo -e "\e[32mChecking for newer update script...\e[0m"
SHA1_1=$(sha1sum update.sh)
git fetch origin #${BRANCH}
git checkout origin/${BRANCH} update.sh
SHA1_2=$(sha1sum update.sh)
if [[ ${SHA1_1} != ${SHA1_2} ]]; then
echo "update.sh changed, please run this script again, exiting."
chmod +x update.sh
exit 0
fi
if [[ -f mailcow.conf ]]; then
source mailcow.conf
else
echo -e "\e[31mNo mailcow.conf - is mailcow installed?\e[0m"
exit 1
fi
read -r -p "Are you sure you want to update mailcow: dockerized? All containers will be stopped. [y/N] " response
if [[ ! "$response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
echo "OK, exiting."
exit 0
fi
echo -e "Stopping mailcow... "
sleep 2
docker-compose down
# Silently fixing remote url from andryyy to mailcow
git remote set-url origin https://github.com/mailcow/mailcow-dockerized
echo -e "\e[32mCommitting current status...\e[0m"
[[ -z "$(git config user.name)" ]] && git config user.name moo
[[ -z "$(git config user.email)" ]] && git config user.email moo@cow.moo
git update-index --assume-unchanged data/conf/rspamd/override.d/worker-controller-password.inc
git add -u
git commit -am "Before update on ${DATE}" > /dev/null
echo -e "\e[32mFetching updated code from remote...\e[0m"
git fetch origin #${BRANCH}
echo -e "\e[32mMerging local with remote code (recursive, strategy: \"${MERGE_STRATEGY:-theirs}\", options: \"patience\"...\e[0m"
git config merge.defaultToUpstream true
git merge -X${MERGE_STRATEGY:-theirs} -Xpatience -m "After update on ${DATE}"
# Need to use a variable to not pass return codes of if checks
MERGE_RETURN=$?
if [[ ${MERGE_RETURN} == 128 ]]; then
echo -e "\e[31m\nOh no, what happened?\n=> You most likely added files to your local mailcow instance that were now added to the official mailcow repository. Please move them to another location before updating mailcow.\e[0m"
exit 1
elif [[ ${MERGE_RETURN} == 1 ]]; then
echo -e "\e[93mPotenial conflict, trying to fix...\e[0m"
git status --porcelain | grep -E "UD|DU" | awk '{print $2}' | xargs rm -v
git add -A
git commit -m "After update on ${DATE}" > /dev/null
git checkout .
echo -e "\e[32mRemoved and recreated files if necessary.\e[0m"
elif [[ ${MERGE_RETURN} != 0 ]]; then
echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m"
echo
echo "Run docker-compose up -d to restart your stack without updates or try again after fixing the mentioned errors."
exit 1
fi
echo -e "\e[32mFetching new docker-compose version...\e[0m"
sleep 2
if [[ ! -z $(which pip) && $(pip list --local | grep -c docker-compose) == 1 ]]; then
true
#prevent breaking a working docker-compose installed with pip
elif [[ $(curl -sL -w "%{http_code}" https://www.servercow.de/docker-compose/latest.php -o /dev/null) == "200" ]]; then
LATEST_COMPOSE=$(curl -#L https://www.servercow.de/docker-compose/latest.php)
COMPOSE_VERSION=$(docker-compose version --short)
if [[ "$LATEST_COMPOSE" != "$COMPOSE_VERSION" ]]; then
if [[ -w $(which docker-compose) ]]; then
curl -#L https://github.com/docker/compose/releases/download/${LATEST_COMPOSE}/docker-compose-$(uname -s)-$(uname -m) > $(which docker-compose)
chmod +x $(which docker-compose)
else
echo -e "\e[33mWARNING: $(which docker-compose) is not writable, but new version $LATEST_COMPOSE is available (installed: $COMPOSE_VERSION)\e[0m"
fi
fi
else
echo -e "\e[33mCannot determine latest docker-compose version, skipping...\e[0m"
fi
echo -e "\e[32mFetching new images, if any...\e[0m"
sleep 2
docker-compose pull
# Fix missing SSL, does not overwrite existing files
[[ ! -d data/assets/ssl ]] && mkdir -p data/assets/ssl
cp -n data/assets/ssl-example/*.pem data/assets/ssl/
echo -e "Checking IPv6 settings... "
if grep -q 'SYSCTL_IPV6_DISABLED=1' mailcow.conf; then
echo
echo '!! IMPORTANT !!'
echo
echo 'SYSCTL_IPV6_DISABLED was removed due to complications. IPv6 can be disabled by editing "docker-compose.yml" and setting "enabled_ipv6: true" to "enabled_ipv6: false".'
echo 'This setting will only be active after a complete shutdown of mailcow by running "docker-compose down" followed by "docker-compose up -d".'
echo
echo '!! IMPORTANT !!'
echo
read -p "Press any key to continue..." < /dev/tty
fi
# Checking for old project name bug
sed -i 's#COMPOSEPROJECT_NAME#COMPOSE_PROJECT_NAME#g' mailcow.conf
echo -e "Fixing PHP-FPM worker ports for Nginx sites..."
sed -i 's#phpfpm:9000#phpfpm:9002#g' data/conf/nginx/*.conf
if ls data/conf/nginx/*.custom 1> /dev/null 2>&1; then
sed -i 's#phpfpm:9000#phpfpm:9002#g' data/conf/nginx/*.custom
fi
# Fix Rspamd maps
if [ -f data/conf/rspamd/custom/global_from_blacklist.map ]; then
mv data/conf/rspamd/custom/global_from_blacklist.map data/conf/rspamd/custom/global_smtp_from_blacklist.map
fi
if [ -f data/conf/rspamd/custom/global_from_whitelist.map ]; then
mv data/conf/rspamd/custom/global_from_whitelist.map data/conf/rspamd/custom/global_smtp_from_whitelist.map
fi
echo -e "\e[32mStarting mailcow...\e[0m"
sleep 2
docker-compose up -d --remove-orphans
if [[ -f "data/web/nextcloud/occ" ]]; then
echo "Setting Nextcloud Redis timeout to 0.0..."
docker exec -it -u www-data $(docker ps -f name=php-fpm-mailcow -q) bash -c "/web/nextcloud/occ config:system:set redis timeout --value=0.0 --type=integer"
fi
echo -e "\e[32mCollecting garbage...\e[0m"
docker_garbage
#echo "In case you encounter any problem, hard-reset to a state before updating mailcow:"
#echo
#git reflog --color=always | grep "Before update on "
#echo
#echo "Use \"git reset --hard hash-on-the-left\" and run docker-compose up -d afterwards."
Reference in New Issue View Git Blame Copy Permalink