mailcow-dockerized/update.sh

#!/usr/bin/env bash

############## Begin Function Section ##############

check_online_status() {
  CHECK_ONLINE_DOMAINS=('https://github.com' 'https://hub.docker.com')
  for domain in "${CHECK_ONLINE_DOMAINS[@]}"; do
    if timeout 6 curl --head --silent --output /dev/null ${domain}; then
      return 0
    fi
  done
  return 1
}

prefetch_images() {
  [[ -z ${BRANCH} ]] && { echo -e "\e[33m\nUnknown branch...\e[0m"; exit 1; }
  git fetch origin #${BRANCH}
  while read image; do
    if [[ "${image}" == "robbertkl/ipv6nat" ]]; then
      if ! grep -qi "ipv6nat-mailcow" docker-compose.yml || grep -qi "enable_ipv6: false" docker-compose.yml; then
        continue
      fi
    fi
    RET_C=0
    until docker pull ${image}; do
      RET_C=$((RET_C + 1))
      echo -e "\e[33m\nError pulling $image, retrying...\e[0m"
      [ ${RET_C} -gt 3 ] && { echo -e "\e[31m\nToo many failed retries, exiting\e[0m"; exit 1; }
      sleep 1
    done
  done < <(git show origin/${BRANCH}:docker-compose.yml | grep "image:" | awk '{ gsub("image:","", $3); print $2 }')
}

docker_garbage() {
  IMGS_TO_DELETE=()
  for container in $(grep -oP "image: \Kmailcow.+" "${SCRIPT_DIR}/docker-compose.yml"); do
    REPOSITORY=${container/:*}
    TAG=${container/*:}
    V_MAIN=${container/*.}
    V_SUB=${container/*.}
    EXISTING_TAGS=$(docker images | grep ${REPOSITORY} | awk '{ print $2 }')
    for existing_tag in ${EXISTING_TAGS[@]}; do
      V_MAIN_EXISTING=${existing_tag/*.}
      V_SUB_EXISTING=${existing_tag/*.}
      # Not an integer
      [[ ! $V_MAIN_EXISTING =~ ^[0-9]+$ ]] && continue
      [[ ! $V_SUB_EXISTING =~ ^[0-9]+$ ]] && continue

      if [[ $V_MAIN_EXISTING == "latest" ]]; then
        echo "Found deprecated label \"latest\" for repository $REPOSITORY, it should be deleted."
        IMGS_TO_DELETE+=($REPOSITORY:$existing_tag)
      elif [[ $V_MAIN_EXISTING -lt $V_MAIN ]]; then
        echo "Found tag $existing_tag for $REPOSITORY, which is older than the current tag $TAG and should be deleted."
        IMGS_TO_DELETE+=($REPOSITORY:$existing_tag)
      elif [[ $V_SUB_EXISTING -lt $V_SUB ]]; then
        echo "Found tag $existing_tag for $REPOSITORY, which is older than the current tag $TAG and should be deleted."
        IMGS_TO_DELETE+=($REPOSITORY:$existing_tag)
      fi
    done
  done

  if [[ ! -z ${IMGS_TO_DELETE[*]} ]]; then
    echo "Run the following command to delete unused image tags:"
    echo
    echo "    docker rmi ${IMGS_TO_DELETE[*]}"
    echo
    if [ ! $FORCE ]; then
      read -r -p "Do you want to delete old image tags right now? [y/N] " response
      if [[ "$response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
        docker rmi ${IMGS_TO_DELETE[*]}
      else
        echo "OK, skipped."
      fi
    else
      echo "Running image removal without extra confirmation due to force mode."
      docker rmi ${IMGS_TO_DELETE[*]}
    fi
    echo -e "\e[32mFurther cleanup...\e[0m"
    echo "If you want to cleanup further garbage collected by Docker, please make sure all containers are up and running before cleaning your system by executing \"docker system prune\""
  fi
}

in_array() {
  local e match="$1"
  shift
  for e; do [[ "$e" == "$match" ]] && return 0; done
  return 1
}

migrate_docker_nat() {
  NAT_CONFIG='{"ipv6":true,"fixed-cidr-v6":"fd00:dead:beef:c0::/80","experimental":true,"ip6tables":true}'
  # Min Docker version
  DOCKERV_REQ=20.10.2
  # Current Docker version
  DOCKERV_CUR=$(docker version -f '{{.Server.Version}}')
  if grep -qi "ipv6nat-mailcow" docker-compose.yml && grep -qi "enable_ipv6: true" docker-compose.yml; then
    echo -e "\e[32mNative IPv6 implementation available.\e[0m"
    echo "This will enable experimental features in the Docker daemon and configure Docker to do the IPv6 NATing instead of ipv6nat-mailcow."
    echo '!!! This step is recommended !!!'
    echo "mailcow will try to roll back the changes if starting Docker fails after modifying the daemon.json configuration file."
    read -r -p "Should we try to enable the native IPv6 implementation in Docker now (recommended)? [y/N] " dockernatresponse
    if [[ ! "${dockernatresponse}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
      echo "OK, skipping this step."
      return 0
    fi
  fi
  # Sort versions and check if we are running a newer or equal version to req
  if [ $(printf "${DOCKERV_REQ}\n${DOCKERV_CUR}" | sort -V | tail -n1) == "${DOCKERV_CUR}" ]; then
    # If Dockerd daemon json exists
    if [ -s /etc/docker/daemon.json ]; then
      IFS=',' read -r -a dockerconfig <<< $(cat /etc/docker/daemon.json | tr -cd '[:alnum:],')
      if ! in_array ipv6true "${dockerconfig[@]}" || \
        ! in_array experimentaltrue "${dockerconfig[@]}" || \
        ! in_array ip6tablestrue "${dockerconfig[@]}" || \
        ! grep -qi "fixed-cidr-v6" /etc/docker/daemon.json; then
          echo -e "\e[33mWarning:\e[0m You seem to have modified the /etc/docker/daemon.json configuration by yourself and not fully/correctly activated the native IPv6 NAT implementation."
          echo "You will need to merge your existing configuration manually or fix/delete the existing daemon.json configuration before trying the update process again."
          echo -e "Please merge the following content and restart the Docker daemon:\n"
          echo ${NAT_CONFIG}
          return 1
      fi
    else
      echo "Working on IPv6 NAT, please wait..."
      echo ${NAT_CONFIG} > /etc/docker/daemon.json
      ip6tables -F -t nat
      [[ -e /etc/alpine-release ]] && rc-service docker restart || systemctl restart docker.service
      if [[ $? -ne 0 ]]; then
        echo -e "\e[31mError:\e[0m Failed to activate IPv6 NAT! Reverting and exiting."
        rm /etc/docker/daemon.json
        if [[ -e /etc/alpine-release ]]; then
          rc-service docker restart
        else
          systemctl reset-failed docker.service
          systemctl restart docker.service
        fi
        return 1
      fi
    fi
    # Removing legacy container
    sed -i '/ipv6nat-mailcow:$/,/^$/d' docker-compose.yml
    if [ -s docker-compose.override.yml ]; then
        sed -i '/ipv6nat-mailcow:$/,/^$/d' docker-compose.override.yml
        if [[ "$(cat docker-compose.override.yml | sed '/^\s*$/d' | wc -l)" == "2" ]]; then
            mv docker-compose.override.yml docker-compose.override.yml_backup
        fi
    fi
    echo -e "\e[32mGreat! \e[0mNative IPv6 NAT is active.\e[0m"
  else
    echo -e "\e[31mPlease upgrade Docker to version ${DOCKERV_REQ} or above.\e[0m"
    return 0
  fi
}

remove_obsolete_nginx_ports() {
    # Removing obsolete docker-compose.override.yml
    for override in docker-compose.override.yml docker-compose.override.yaml; do
    if [ -s $override ] ; then
        if cat $override | grep nginx-mailcow > /dev/null 2>&1; then
          if cat $override | grep -E '(\[::])' > /dev/null 2>&1; then
            if cat $override | grep -w 80:80 > /dev/null 2>&1 && cat $override | grep -w 443:443 > /dev/null 2>&1 ; then
              echo -e "\e[33mBacking up ${override} to preserve custom changes...\e[0m"
              echo -e "\e[33m!!! Manual Merge needed (if other overrides are set) !!!\e[0m"
              sleep 3
              cp $override ${override}_backup
              sed -i '/nginx-mailcow:$/,/^$/d' $override
              echo -e "\e[33mRemoved obsolete NGINX IPv6 Bind from original override File.\e[0m"
                if [[ "$(cat $override | sed '/^\s*$/d' | wc -l)" == "2" ]]; then
                  mv $override ${override}_empty
                  echo -e "\e[31m${override} is empty. Renamed it to ensure mailcow is startable.\e[0m"
                fi
            fi
          fi
        fi
    fi
    done        
}

detect_docker_compose_command(){
if ! [ "${DOCKER_COMPOSE_VERSION}" == "native" ] && ! [ "${DOCKER_COMPOSE_VERSION}" == "standalone" ]; then
  if docker compose > /dev/null 2>&1; then
      if docker compose version --short | grep "2." > /dev/null 2>&1; then
        DOCKER_COMPOSE_VERSION=native
        COMPOSE_COMMAND="docker compose"
        echo -e "\e[31mFound Docker Compose Plugin (native).\e[0m"
        echo -e "\e[31mSetting the DOCKER_COMPOSE_VERSION Variable to native\e[0m"
        sleep 2
        echo -e "\e[33mNotice: You'll have to update this Compose Version via your Package Manager manually!\e[0m"
      else
        echo -e "\e[31mCannot find Docker Compose with a Version Higher than 2.X.X.\e[0m" 
        echo -e "\e[31mPlease update/install it manually regarding to this doc site: https://mailcow.github.io/mailcow-dockerized-docs/i_u_m/i_u_m_install/\e[0m"
        exit 1
      fi
  elif docker-compose > /dev/null 2>&1; then
    if ! [[ $(alias docker-compose 2> /dev/null) ]] ; then
      if docker-compose version --short | grep "^2." > /dev/null 2>&1; then
        DOCKER_COMPOSE_VERSION=standalone
        COMPOSE_COMMAND="docker-compose"
        echo -e "\e[31mFound Docker Compose Standalone.\e[0m"
        echo -e "\e[31mSetting the DOCKER_COMPOSE_VERSION Variable to standalone\e[0m"
        sleep 2
        echo -e "\e[33mNotice: For an automatic update of docker-compose please use the update_compose.sh scripts located at the helper-scripts folder.\e[0m"
      else
        echo -e "\e[31mCannot find Docker Compose with a Version Higher than 2.X.X.\e[0m" 
        echo -e "\e[31mPlease update/install regarding to this doc site: https://mailcow.github.io/mailcow-dockerized-docs/i_u_m/i_u_m_install/\e[0m"
        exit 1
      fi
    fi

  else
    echo -e "\e[31mCannot find Docker Compose.\e[0m" 
    echo -e "\e[31mPlease install it regarding to this doc site: https://mailcow.github.io/mailcow-dockerized-docs/i_u_m/i_u_m_install/\e[0m"
    exit 1
  fi

elif [ "${DOCKER_COMPOSE_VERSION}" == "native" ]; then
  COMPOSE_COMMAND="docker compose"

elif [ "${DOCKER_COMPOSE_VERSION}" == "standalone" ]; then
  COMPOSE_COMMAND="docker-compose"
fi
}

############## End Function Section ##############

# Check permissions
if [ "$(id -u)" -ne "0" ]; then
  echo "You need to be root"
  exit 1
fi

SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"

# Run pre-update-hook
if [ -f "${SCRIPT_DIR}/pre_update_hook.sh" ]; then
  bash "${SCRIPT_DIR}/pre_update_hook.sh"
fi

if [[ "$(uname -r)" =~ ^4\.15\.0-60 ]]; then
  echo "DO NOT RUN mailcow ON THIS UBUNTU KERNEL!";
  echo "Please update to 5.x or use another distribution."
  exit 1
fi

if [[ "$(uname -r)" =~ ^4\.4\. ]]; then
  if grep -q Ubuntu <<< $(uname -a); then
    echo "DO NOT RUN mailcow ON THIS UBUNTU KERNEL!"
    echo "Please update to linux-generic-hwe-16.04 by running \"apt-get install --install-recommends linux-generic-hwe-16.04\""
    exit 1
  fi
  echo "mailcow on a 4.4.x kernel is not supported. It may or may not work, please upgrade your kernel or continue at your own risk."
  read -p "Press any key to continue..." < /dev/tty
fi

# Exit on error and pipefail
set -o pipefail

# Setting high dc timeout
export COMPOSE_HTTP_TIMEOUT=600

# Add /opt/bin to PATH
PATH=$PATH:/opt/bin

umask 0022

# Unset COMPOSE_COMMAND and DOCKER_COMPOSE_VERSION Variable to be on the newest state.
unset COMPOSE_COMMAND
unset DOCKER_COMPOSE_VERSION

for bin in curl docker git awk sha1sum; do
  if [[ -z $(command -v ${bin}) ]]; then 
  echo "Cannot find ${bin}, exiting..." 
  exit 1;
  fi  
done

export LC_ALL=C
DATE=$(date +%Y-%m-%d_%H_%M_%S)
BRANCH=$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD)

while (($#)); do
  case "${1}" in
    --check|-c)
      echo "Checking remote code for updates..."
      LATEST_REV=$(git ls-remote --exit-code --refs --quiet https://github.com/mailcow/mailcow-dockerized ${BRANCH} | cut -f1)
      if [ $? -ne 0 ]; then
        echo "A problem occurred while trying to fetch the latest revision from github."
        exit 99
      fi
      if [[ -z $(git log HEAD --pretty=format:"%H" | grep "${LATEST_REV}") ]]; then
        echo -e "Updated code is available.\nThe changes can be found here: https://github.com/mailcow/mailcow-dockerized/commits/master"
        git log --date=short --pretty=format:"%ad - %s" $(git rev-parse --short HEAD)..origin/master
        exit 0
      else
        echo "No updates available."
        exit 3
      fi
    ;;
    --ours)
      MERGE_STRATEGY=ours
    ;;
    --skip-start)
      SKIP_START=y
    ;;
    --skip-ping-check)
      SKIP_PING_CHECK=y
    ;;
    --stable)
      CURRENT_BRANCH="$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD)"
      NEW_BRANCH="master"
    ;;
    --gc)
      echo -e "\e[32mCollecting garbage...\e[0m"
      docker_garbage
      exit 0
    ;;
    --nightly)
      CURRENT_BRANCH="$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD)"
      NEW_BRANCH="nightly"
    ;;
    --prefetch)
      echo -e "\e[32mPrefetching images...\e[0m"
      prefetch_images
      exit 0
    ;;
    -f|--force)
      echo -e "\e[32mRunning in forced mode...\e[0m"
      FORCE=y
    ;;
    --help|-h)
    echo './update.sh [-c|--check, --ours, --gc, --nightly, --prefetch, --skip-start, --skip-ping-check, --stable, -f|--force, -h|--help]

  -c|--check           -   Check for updates and exit (exit codes => 0: update available, 3: no updates)
  --ours               -   Use merge strategy option "ours" to solve conflicts in favor of non-mailcow code (local changes over remote changes), not recommended!
  --gc                 -   Run garbage collector to delete old image tags
  --nightly            -   Switch your mailcow updates to the unstable (nightly) branch. FOR TESTING PURPOSES ONLY!!!!
  --prefetch           -   Only prefetch new images and exit (useful to prepare updates)
  --skip-start         -   Do not start mailcow after update
  --skip-ping-check    -   Skip ICMP Check to public DNS resolvers (Use it only if you´ve blocked any ICMP Connections to your mailcow machine)
  --stable             -   Switch your mailcow updates to the stable (master) branch. Default unless you changed it with --nightly.
  -f|--force           -   Force update, do not ask questions
'
    exit 1
  esac
  shift
done

chmod 600 mailcow.conf
source mailcow.conf

detect_docker_compose_command

[[ ! -f mailcow.conf ]] && { echo "mailcow.conf is missing! Is mailcow installed?"; exit 1;}
DOTS=${MAILCOW_HOSTNAME//[^.]};
if [ ${#DOTS} -lt 2 ]; then
  echo "MAILCOW_HOSTNAME (${MAILCOW_HOSTNAME}) is not a FQDN!"
  echo "Please change it to a FQDN and run $COMPOSE_COMMAND down followed by $COMPOSE_COMMAND up -d"
  exit 1
fi

if grep --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox grep detected, please install gnu grep, \"apk add --no-cache --upgrade grep\""; exit 1; fi
# This will also cover sort
if cp --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox cp detected, please install coreutils, \"apk add --no-cache --upgrade coreutils\""; exit 1; fi
if sed --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox sed detected, please install gnu sed, \"apk add --no-cache --upgrade sed\""; exit 1; fi

CONFIG_ARRAY=(
  "SKIP_LETS_ENCRYPT"
  "SKIP_SOGO"
  "USE_WATCHDOG"
  "WATCHDOG_NOTIFY_EMAIL"
  "WATCHDOG_NOTIFY_BAN"
  "WATCHDOG_EXTERNAL_CHECKS"
  "WATCHDOG_SUBJECT"
  "SKIP_CLAMD"
  "SKIP_IP_CHECK"
  "ADDITIONAL_SAN"
  "DOVEADM_PORT"
  "IPV4_NETWORK"
  "IPV6_NETWORK"
  "LOG_LINES"
  "SNAT_TO_SOURCE"
  "SNAT6_TO_SOURCE"
  "COMPOSE_PROJECT_NAME"
  "DOCKER_COMPOSE_VERSION"
  "SQL_PORT"
  "API_KEY"
  "API_KEY_READ_ONLY"
  "API_ALLOW_FROM"
  "MAILDIR_GC_TIME"
  "MAILDIR_SUB"
  "ACL_ANYONE"
  "SOLR_HEAP"
  "SKIP_SOLR"
  "ENABLE_SSL_SNI"
  "ALLOW_ADMIN_EMAIL_LOGIN"
  "SKIP_HTTP_VERIFICATION"
  "SOGO_EXPIRE_SESSION"
  "REDIS_PORT"
  "DOVECOT_MASTER_USER"
  "DOVECOT_MASTER_PASS"
  "MAILCOW_PASS_SCHEME"
  "ADDITIONAL_SERVER_NAMES"
  "ACME_CONTACT"
  "WATCHDOG_VERBOSE"
  "WEBAUTHN_ONLY_TRUSTED_VENDORS"
)

sed -i --follow-symlinks '$a\' mailcow.conf
for option in ${CONFIG_ARRAY[@]}; do
  if [[ ${option} == "ADDITIONAL_SAN" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo "${option}=" >> mailcow.conf
    fi
  elif [[ ${option} == "COMPOSE_PROJECT_NAME" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo "COMPOSE_PROJECT_NAME=mailcowdockerized" >> mailcow.conf
    fi
  elif [[ ${option} == "DOCKER_COMPOSE_VERSION" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo "# Used Docker Compose version" >> mailcow.conf
      echo "# Switch here between native (compose plugin) and standalone" >> mailcow.conf
      echo "# For more informations take a look at the mailcow docs regarding the configuration options." >> mailcow.conf
      echo "# Normally this should be untouched but if you decided to use either of those you can switch it manually here." >> mailcow.conf
      echo "# Please be aware that at least one of those variants should be installed on your maschine or mailcow will fail." >> mailcow.conf
      echo "" >> mailcow.conf
      echo "DOCKER_COMPOSE_VERSION=${DOCKER_COMPOSE_VERSION}" >> mailcow.conf
    fi
  elif [[ ${option} == "DOVEADM_PORT" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo "DOVEADM_PORT=127.0.0.1:19991" >> mailcow.conf
    fi
  elif [[ ${option} == "WATCHDOG_NOTIFY_EMAIL" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo "WATCHDOG_NOTIFY_EMAIL=" >> mailcow.conf
    fi
  elif [[ ${option} == "LOG_LINES" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Max log lines per service to keep in Redis logs' >> mailcow.conf
      echo "LOG_LINES=9999" >> mailcow.conf
    fi
  elif [[ ${option} == "IPV4_NETWORK" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Internal IPv4 /24 subnet, format n.n.n. (expands to n.n.n.0/24)' >> mailcow.conf
      echo "IPV4_NETWORK=172.22.1" >> mailcow.conf
    fi
  elif [[ ${option} == "IPV6_NETWORK" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Internal IPv6 subnet in fc00::/7' >> mailcow.conf
      echo "IPV6_NETWORK=fd4d:6169:6c63:6f77::/64" >> mailcow.conf
    fi
  elif [[ ${option} == "SQL_PORT" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Bind SQL to 127.0.0.1 on port 13306' >> mailcow.conf
      echo "SQL_PORT=127.0.0.1:13306" >> mailcow.conf
    fi
  elif [[ ${option} == "API_KEY" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Create or override API key for web UI' >> mailcow.conf
      echo "#API_KEY=" >> mailcow.conf
    fi
  elif [[ ${option} == "API_KEY_READ_ONLY" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Create or override read-only API key for web UI' >> mailcow.conf
      echo "#API_KEY_READ_ONLY=" >> mailcow.conf
    fi
  elif [[ ${option} == "API_ALLOW_FROM" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Must be set for API_KEY to be active' >> mailcow.conf
      echo '# IPs only, no networks (networks can be set via UI)' >> mailcow.conf
      echo "#API_ALLOW_FROM=" >> mailcow.conf
    fi
  elif [[ ${option} == "SNAT_TO_SOURCE" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Use this IPv4 for outgoing connections (SNAT)' >> mailcow.conf
      echo "#SNAT_TO_SOURCE=" >> mailcow.conf
    fi
  elif [[ ${option} == "SNAT6_TO_SOURCE" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Use this IPv6 for outgoing connections (SNAT)' >> mailcow.conf
      echo "#SNAT6_TO_SOURCE=" >> mailcow.conf
    fi
  elif [[ ${option} == "MAILDIR_GC_TIME" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Garbage collector cleanup' >> mailcow.conf
      echo '# Deleted domains and mailboxes are moved to /var/vmail/_garbage/timestamp_sanitizedstring' >> mailcow.conf
      echo '# How long should objects remain in the garbage until they are being deleted? (value in minutes)' >> mailcow.conf
      echo '# Check interval is hourly' >> mailcow.conf
      echo 'MAILDIR_GC_TIME=1440' >> mailcow.conf
    fi
  elif [[ ${option} == "ACL_ANYONE" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Set this to "allow" to enable the anyone pseudo user. Disabled by default.' >> mailcow.conf
      echo '# When enabled, ACL can be created, that apply to "All authenticated users"' >> mailcow.conf
      echo '# This should probably only be activated on mail hosts, that are used exclusivly by one organisation.' >> mailcow.conf
      echo '# Otherwise a user might share data with too many other users.' >> mailcow.conf
      echo 'ACL_ANYONE=disallow' >> mailcow.conf
    fi
  elif [[ ${option} == "SOLR_HEAP" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Solr heap size, there is no recommendation, please see Solr docs.' >> mailcow.conf
      echo '# Solr is a prone to run OOM on large systems and should be monitored. Unmonitored Solr setups are not recommended.' >> mailcow.conf
      echo '# Solr will refuse to start with total system memory below or equal to 2 GB.' >> mailcow.conf
      echo "SOLR_HEAP=1024" >> mailcow.conf
    fi
  elif [[ ${option} == "SKIP_SOLR" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Solr is disabled by default after upgrading from non-Solr to Solr-enabled mailcows.' >> mailcow.conf
      echo '# Disable Solr or if you do not want to store a readable index of your mails in solr-vol-1.' >> mailcow.conf
      echo "SKIP_SOLR=y" >> mailcow.conf
    fi
  elif [[ ${option} == "ENABLE_SSL_SNI" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Create seperate certificates for all domains - y/n' >> mailcow.conf
      echo '# this will allow adding more than 100 domains, but some email clients will not be able to connect with alternative hostnames' >> mailcow.conf
      echo '# see https://wiki.dovecot.org/SSL/SNIClientSupport' >> mailcow.conf
      echo "ENABLE_SSL_SNI=n" >> mailcow.conf
    fi
  elif [[ ${option} == "SKIP_SOGO" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Skip SOGo: Will disable SOGo integration and therefore webmail, DAV protocols and ActiveSync support (experimental, unsupported, not fully implemented) - y/n' >> mailcow.conf
      echo "SKIP_SOGO=n" >> mailcow.conf
    fi
  elif [[ ${option} == "MAILDIR_SUB" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# MAILDIR_SUB defines a path in a users virtual home to keep the maildir in. Leave empty for updated setups.' >> mailcow.conf
      echo "#MAILDIR_SUB=Maildir" >> mailcow.conf
      echo "MAILDIR_SUB=" >> mailcow.conf
    fi
  elif [[ ${option} == "WATCHDOG_NOTIFY_BAN" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Notify about banned IP. Includes whois lookup.' >> mailcow.conf
      echo "WATCHDOG_NOTIFY_BAN=y" >> mailcow.conf
    fi
  elif [[ ${option} == "WATCHDOG_SUBJECT" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Subject for watchdog mails. Defaults to "Watchdog ALERT" followed by the error message.' >> mailcow.conf
      echo "#WATCHDOG_SUBJECT=" >> mailcow.conf
    fi
  elif [[ ${option} == "WATCHDOG_EXTERNAL_CHECKS" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Checks if mailcow is an open relay. Requires a SAL. More checks will follow.' >> mailcow.conf
      echo '# No data is collected. Opt-in and anonymous.' >> mailcow.conf
      echo '# Will only work with unmodified mailcow setups.' >> mailcow.conf
      echo "WATCHDOG_EXTERNAL_CHECKS=n" >> mailcow.conf
    fi
  elif [[ ${option} == "SOGO_EXPIRE_SESSION" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# SOGo session timeout in minutes' >> mailcow.conf
      echo "SOGO_EXPIRE_SESSION=480" >> mailcow.conf
    fi
  elif [[ ${option} == "REDIS_PORT" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo "REDIS_PORT=127.0.0.1:7654" >> mailcow.conf
    fi
  elif [[ ${option} == "DOVECOT_MASTER_USER" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# DOVECOT_MASTER_USER and _PASS must _both_ be provided. No special chars.' >> mailcow.conf
      echo '# Empty by default to auto-generate master user and password on start.' >> mailcow.conf
      echo '# User expands to DOVECOT_MASTER_USER@mailcow.local' >> mailcow.conf
      echo '# LEAVE EMPTY IF UNSURE' >> mailcow.conf
      echo "DOVECOT_MASTER_USER=" >> mailcow.conf
    fi
  elif [[ ${option} == "DOVECOT_MASTER_PASS" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# LEAVE EMPTY IF UNSURE' >> mailcow.conf
      echo "DOVECOT_MASTER_PASS=" >> mailcow.conf
    fi
  elif [[ ${option} == "MAILCOW_PASS_SCHEME" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "Adding new option \"${option}\" to mailcow.conf"
      echo '# Password hash algorithm' >> mailcow.conf
      echo '# Only certain password hash algorithm are supported. For a fully list of supported schemes,' >> mailcow.conf
      echo '# see https://mailcow.github.io/mailcow-dockerized-docs/models/model-passwd/' >> mailcow.conf
      echo "MAILCOW_PASS_SCHEME=BLF-CRYPT" >> mailcow.conf
    fi
  elif [[ ${option} == "ADDITIONAL_SERVER_NAMES" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo '# Additional server names for mailcow UI' >> mailcow.conf
      echo '#' >> mailcow.conf
      echo '# Specify alternative addresses for the mailcow UI to respond to' >> mailcow.conf
      echo '# This is useful when you set mail.* as ADDITIONAL_SAN and want to make sure mail.maildomain.com will always point to the mailcow UI.' >> mailcow.conf
      echo '# If the server name does not match a known site, Nginx decides by best-guess and may redirect users to the wrong web root.' >> mailcow.conf
      echo '# You can understand this as server_name directive in Nginx.' >> mailcow.conf
      echo '# Comma separated list without spaces! Example: ADDITIONAL_SERVER_NAMES=a.b.c,d.e.f' >> mailcow.conf
      echo 'ADDITIONAL_SERVER_NAMES=' >> mailcow.conf
    fi
  elif [[ ${option} == "ACME_CONTACT" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo '# Lets Encrypt registration contact information' >> mailcow.conf
      echo '# Optional: Leave empty for none' >> mailcow.conf
      echo '# This value is only used on first order!' >> mailcow.conf
      echo '# Setting it at a later point will require the following steps:' >> mailcow.conf
      echo '# https://mailcow.github.io/mailcow-dockerized-docs/troubleshooting/debug-reset_tls/' >> mailcow.conf
      echo 'ACME_CONTACT=' >> mailcow.conf
  fi
  elif [[ ${option} == "WEBAUTHN_ONLY_TRUSTED_VENDORS" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo "# WebAuthn device manufacturer verification" >> mailcow.conf
      echo '# After setting WEBAUTHN_ONLY_TRUSTED_VENDORS=y only devices from trusted manufacturers are allowed' >> mailcow.conf
      echo '# root certificates can be placed for validation under mailcow-dockerized/data/web/inc/lib/WebAuthn/rootCertificates' >> mailcow.conf
      echo 'WEBAUTHN_ONLY_TRUSTED_VENDORS=n' >> mailcow.conf
    fi
elif [[ ${option} == "WATCHDOG_VERBOSE" ]]; then
    if ! grep -q ${option} mailcow.conf; then
      echo '# Enable watchdog verbose logging' >> mailcow.conf
      echo 'WATCHDOG_VERBOSE=n' >> mailcow.conf
  fi
  elif ! grep -q ${option} mailcow.conf; then
    echo "Adding new option \"${option}\" to mailcow.conf"
    echo "${option}=n" >> mailcow.conf
  fi
done

if [[( ${SKIP_PING_CHECK} == "y")]]; then
echo -e "\e[32mSkipping Ping Check...\e[0m"

else
   echo -en "Checking internet connection... "
   if ! check_online_status; then
      echo -e "\e[31mfailed\e[0m"
      exit 1
   else
      echo -e "\e[32mOK\e[0m"
   fi
fi

if ! [ $NEW_BRANCH ]; then
  echo -e "\e[33mDetecting which build your mailcow runs on...\e[0m"
  sleep 1
  if [ ${BRANCH} == "master" ]; then
    echo -e "\e[32mYou are receiving stable updates (master).\e[0m"
    echo -e "\e[33mTo change that run the update.sh Script one time with the --nightly parameter to switch to nightly builds.\e[0m"

  elif [ ${BRANCH} == "nightly" ]; then
    echo -e "\e[31mYou are receiving unstable updates (nightly). These are for testing purposes only!!!\e[0m"
    sleep 1
    echo -e "\e[33mTo change that run the update.sh Script one time with the --stable parameter to switch to stable builds.\e[0m"

  else
    echo -e "\e[33mYou are receiving updates from a unsupported branch.\e[0m"
    sleep 1
    echo -e "\e[33mThe mailcow stack might still work but it is recommended to switch to the master branch (stable builds).\e[0m"
    echo -e "\e[33mTo change that run the update.sh Script one time with the --stable parameter to switch to stable builds.\e[0m"
  fi
elif [ $FORCE ]; then
  echo -e "\e[31mYou are running in forced mode!\e[0m"
  echo -e "\e[31mA Branch Switch can only be performed manually (monitored).\e[0m"
  echo -e "\e[31mPlease rerun the update.sh Script without the --force/-f parameter.\e[0m"
  sleep 1
elif [ $NEW_BRANCH == "master" ] && [ $CURRENT_BRANCH != "master" ]; then
  echo -e "\e[33mYou are about to switch your mailcow Updates to the stable (master) branch.\e[0m"
  sleep 1
  echo -e "\e[33mBefore you do: Please take a backup of all components to ensure that no Data is lost...\e[0m"
  sleep 1
  echo -e "\e[31mWARNING: Please see on GitHub or ask in the communitys if a switch to master is stable or not.
  In some rear cases a Update back to master can destroy your mailcow configuration in case of Database Upgrades etc.
  Normally a upgrade back to master should be safe during each full release. 
  Check GitHub for Database Changes and Update only if there similar to the full release!\e[0m"
  read -r -p "Are you sure you that want to continue upgrading to the stable (master) branch? [y/N] " response
  if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
    echo "OK. If you prepared yourself for that please run the update.sh Script with the --stable parameter again to trigger this process here."
    exit 0
  fi
  BRANCH=$NEW_BRANCH
  DIFF_DIRECTORY=update_diffs
  DIFF_FILE=${DIFF_DIRECTORY}/diff_before_upgrade_to_master_$(date +"%Y-%m-%d-%H-%M-%S")
  mv diff_before_upgrade* ${DIFF_DIRECTORY}/ 2> /dev/null
  if ! git diff-index --quiet HEAD; then
    echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m"
    mkdir -p ${DIFF_DIRECTORY}
    git diff ${BRANCH} --stat > ${DIFF_FILE}
    git diff ${BRANCH} >> ${DIFF_FILE}
  fi
  echo -e "\e[32mSwitching Branch to ${BRANCH}...\e[0m"
  git fetch origin
  git checkout -f ${BRANCH}

elif [ $NEW_BRANCH == "nightly" ] && [ $CURRENT_BRANCH != "nightly" ]; then
  echo -e "\e[33mYou are about to switch your mailcow Updates to the unstable (nightly) branch.\e[0m"
  sleep 1
  echo -e "\e[33mBefore you do: Please take a backup of all components to ensure that no Data is lost...\e[0m"
  sleep 1
  echo -e "\e[31mWARNING: A switch to nightly is possible any time. But a switch back (to master) isn't.\e[0m"
  read -r -p "Are you sure you that want to continue upgrading to the unstable (nightly) branch? [y/N] " response
  if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
    echo "OK. If you prepared yourself for that please run the update.sh Script with the --nightly parameter again to trigger this process here."
    exit 0
  fi
  BRANCH=$NEW_BRANCH
  DIFF_DIRECTORY=update_diffs
  DIFF_FILE=${DIFF_DIRECTORY}/diff_before_upgrade_to_nightly_$(date +"%Y-%m-%d-%H-%M-%S")
  mv diff_before_upgrade* ${DIFF_DIRECTORY}/ 2> /dev/null
  if ! git diff-index --quiet HEAD; then
    echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m"
    mkdir -p ${DIFF_DIRECTORY}
    git diff ${BRANCH} --stat > ${DIFF_FILE}
    git diff ${BRANCH} >> ${DIFF_FILE}
  fi
  git fetch origin
  git checkout -f ${BRANCH}
fi

echo -e "\e[32mChecking for newer update script...\e[0m"
SHA1_1=$(sha1sum update.sh)
git fetch origin #${BRANCH}
git checkout origin/${BRANCH} update.sh
SHA1_2=$(sha1sum update.sh)
if [[ ${SHA1_1} != ${SHA1_2} ]]; then
  echo "update.sh changed, please run this script again, exiting."
  chmod +x update.sh
  exit 2
fi

if [ ! $FORCE ]; then
  read -r -p "Are you sure you want to update mailcow: dockerized? All containers will be stopped. [y/N] " response
  if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then
    echo "OK, exiting."
    exit 0
  fi
  migrate_docker_nat
fi

remove_obsolete_nginx_ports

echo -e "\e[32mValidating docker-compose stack configuration...\e[0m"
sed -i 's/HTTPS_BIND:-:/HTTPS_BIND:-/g' docker-compose.yml
sed -i 's/HTTP_BIND:-:/HTTP_BIND:-/g' docker-compose.yml
if ! $COMPOSE_COMMAND config -q; then
  echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m"
  exit 1
fi

echo -e "\e[32mChecking for conflicting bridges...\e[0m"
MAILCOW_BRIDGE=$($COMPOSE_COMMAND config | grep -i com.docker.network.bridge.name | cut -d':' -f2)
while read NAT_ID; do
  iptables -t nat -D POSTROUTING $NAT_ID
done < <(iptables -L -vn -t nat --line-numbers | grep $IPV4_NETWORK | grep -E 'MASQUERADE.*all' | grep -v ${MAILCOW_BRIDGE} | cut -d' ' -f1)

DIFF_DIRECTORY=update_diffs
DIFF_FILE=${DIFF_DIRECTORY}/diff_before_update_$(date +"%Y-%m-%d-%H-%M-%S")
mv diff_before_update* ${DIFF_DIRECTORY}/ 2> /dev/null
if ! git diff-index --quiet HEAD; then
  echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m"
  mkdir -p ${DIFF_DIRECTORY}
  git diff --stat > ${DIFF_FILE}
  git diff >> ${DIFF_FILE}
fi

echo -e "\e[32mPrefetching images...\e[0m"
prefetch_images

echo -e "\e[32mStopping mailcow...\e[0m"
sleep 2
MAILCOW_CONTAINERS=($($COMPOSE_COMMAND ps -q))
$COMPOSE_COMMAND down
echo -e "\e[32mChecking for remaining containers...\e[0m"
sleep 2
for container in "${MAILCOW_CONTAINERS[@]}"; do
  docker rm -f "$container" 2> /dev/null
done

[[ -f data/conf/nginx/ZZZ-ejabberd.conf ]] && rm data/conf/nginx/ZZZ-ejabberd.conf

# Silently fixing remote url from andryyy to mailcow
git remote set-url origin https://github.com/mailcow/mailcow-dockerized
echo -e "\e[32mCommitting current status...\e[0m"
[[ -z "$(git config user.name)" ]] && git config user.name moo
[[ -z "$(git config user.email)" ]] && git config user.email moo@cow.moo
[[ ! -z $(git ls-files data/conf/rspamd/override.d/worker-controller-password.inc) ]] && git rm data/conf/rspamd/override.d/worker-controller-password.inc
git add -u
git commit -am "Before update on ${DATE}" > /dev/null
echo -e "\e[32mFetching updated code from remote...\e[0m"
git fetch origin #${BRANCH}
echo -e "\e[32mMerging local with remote code (recursive, strategy: \"${MERGE_STRATEGY:-theirs}\", options: \"patience\"...\e[0m"
git config merge.defaultToUpstream true
git merge -X${MERGE_STRATEGY:-theirs} -Xpatience -m "After update on ${DATE}"
# Need to use a variable to not pass return codes of if checks
MERGE_RETURN=$?
if [[ ${MERGE_RETURN} == 128 ]]; then
  echo -e "\e[31m\nOh no, what happened?\n=> You most likely added files to your local mailcow instance that were now added to the official mailcow repository. Please move them to another location before updating mailcow.\e[0m"
  exit 1
elif [[ ${MERGE_RETURN} == 1 ]]; then
  echo -e "\e[93mPotenial conflict, trying to fix...\e[0m"
  git status --porcelain | grep -E "UD|DU" | awk '{print $2}' | xargs rm -v
  git add -A
  git commit -m "After update on ${DATE}" > /dev/null
  git checkout .
  echo -e "\e[32mRemoved and recreated files if necessary.\e[0m"
elif [[ ${MERGE_RETURN} != 0 ]]; then
  echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m"
  echo
  echo "Run $COMPOSE_COMMAND up -d to restart your stack without updates or try again after fixing the mentioned errors."
  exit 1
fi

echo -e "\e[32mFetching new images, if any...\e[0m"
sleep 2
$COMPOSE_COMMAND pull

# Fix missing SSL, does not overwrite existing files
[[ ! -d data/assets/ssl ]] && mkdir -p data/assets/ssl
cp -n -d data/assets/ssl-example/*.pem data/assets/ssl/

echo -e "Checking IPv6 settings... "
if grep -q 'SYSCTL_IPV6_DISABLED=1' mailcow.conf; then
  echo
  echo '!! IMPORTANT !!'
  echo
  echo 'SYSCTL_IPV6_DISABLED was removed due to complications. IPv6 can be disabled by editing "docker-compose.yml" and setting "enable_ipv6: true" to "enable_ipv6: false".'
  echo 'This setting will only be active after a complete shutdown of mailcow by running $COMPOSE_COMMAND down followed by $COMPOSE_COMMAND up -d".'
  echo
  echo '!! IMPORTANT !!'
  echo
  read -p "Press any key to continue..." < /dev/tty
fi

# Checking for old project name bug
sed -i --follow-symlinks 's#COMPOSEPROJECT_NAME#COMPOSE_PROJECT_NAME#g' mailcow.conf

# Fix Rspamd maps
if [ -f data/conf/rspamd/custom/global_from_blacklist.map ]; then
  mv data/conf/rspamd/custom/global_from_blacklist.map data/conf/rspamd/custom/global_smtp_from_blacklist.map
fi
if [ -f data/conf/rspamd/custom/global_from_whitelist.map ]; then
  mv data/conf/rspamd/custom/global_from_whitelist.map data/conf/rspamd/custom/global_smtp_from_whitelist.map
fi

# Fix deprecated metrics.conf
if [ -f "data/conf/rspamd/local.d/metrics.conf" ]; then
  if [ ! -z "$(git diff --name-only origin/master data/conf/rspamd/local.d/metrics.conf)" ]; then
    echo -e "\e[33mWARNING\e[0m - Please migrate your customizations of data/conf/rspamd/local.d/metrics.conf to actions.conf and groups.conf after this update."
    echo "The deprecated configuration file metrics.conf will be moved to metrics.conf_deprecated after updating mailcow."
  fi
  mv data/conf/rspamd/local.d/metrics.conf data/conf/rspamd/local.d/metrics.conf_deprecated
fi

# Set app_info.inc.php
if [ ${BRANCH} == "master" ]; then
  mailcow_git_version=$(git describe --tags `git rev-list --tags --max-count=1`)
elif [ ${BRANCH} == "nightly" ]; then
  mailcow_git_version=$(git rev-parse --short $(git rev-parse @{upstream}))
  mailcow_last_git_version=""
else
  mailcow_git_version=$(git rev-parse --short HEAD)
  mailcow_last_git_version=""
fi

mailcow_git_commit=$(git rev-parse origin/${BRANCH})
mailcow_git_commit_date=$(git log -1 --format=%ci @{upstream} )

if [ $? -eq 0 ]; then
  echo '<?php' > data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_VERSION="'$mailcow_git_version'";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_LAST_GIT_VERSION="";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_OWNER="mailcow";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_REPO="mailcow-dockerized";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_URL="https://github.com/mailcow/mailcow-dockerized";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_COMMIT="'$mailcow_git_commit'";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_COMMIT_DATE="'$mailcow_git_commit_date'";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_BRANCH="'$BRANCH'";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_UPDATEDAT='$(date +%s)';' >> data/web/inc/app_info.inc.php
  echo '?>' >> data/web/inc/app_info.inc.php
else
  echo '<?php' > data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_VERSION="'$mailcow_git_version'";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_LAST_GIT_VERSION="";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_OWNER="mailcow";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_REPO="mailcow-dockerized";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_URL="https://github.com/mailcow/mailcow-dockerized";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_COMMIT="";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_GIT_COMMIT_DATE="";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_BRANCH="'$BRANCH'";' >> data/web/inc/app_info.inc.php
  echo '  $MAILCOW_UPDATEDAT='$(date +%s)';' >> data/web/inc/app_info.inc.php
  echo '?>' >> data/web/inc/app_info.inc.php
  echo -e "\e[33mCannot determine current git repository version...\e[0m"
fi

# Set DOCKER_COMPOSE_VERSION
sed -i 's/^DOCKER_COMPOSE_VERSION=$/DOCKER_COMPOSE_VERSION='$DOCKER_COMPOSE_VERSION'/g' mailcow.conf

if [[ ${SKIP_START} == "y" ]]; then
  echo -e "\e[33mNot starting mailcow, please run \"$COMPOSE_COMMAND up -d --remove-orphans\" to start mailcow.\e[0m"
else
  echo -e "\e[32mStarting mailcow...\e[0m"
  sleep 2
  $COMPOSE_COMMAND up -d --remove-orphans
fi

echo -e "\e[32mCollecting garbage...\e[0m"
docker_garbage

# Run post-update-hook
if [ -f "${SCRIPT_DIR}/post_update_hook.sh" ]; then
  bash "${SCRIPT_DIR}/post_update_hook.sh"
fi

# echo "In case you encounter any problem, hard-reset to a state before updating mailcow:"
# echo
# git reflog --color=always | grep "Before update on "
# echo
# echo "Use \"git reset --hard hash-on-the-left\" and run $COMPOSE_COMMAND up -d afterwards."