mirror of
git://git.savannah.gnu.org/libtool.git
synced 2024-11-27 06:09:57 +08:00
d7919d50d0
* cfg.mk (local-checks-to-fix): Move sc_trailing_blank from here... (local-checks-to-skip): ...to here, because otherwise it flags valid RFC3676 signature blocks. (sc_trailing_blank-non-rfc3676): An improved sc_trailing_blank implementation that doesn't flag signature blocks as violations. * Makefile.am, bootstrap.conf, doc/PLATFORMS, libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4, libltdl/m4/lt~obsolete.m4, tests/archive-in-archive.at, tests/convenience.at, tests/darwin.at, tests/depdemo/l1/l1.c, tests/depdemo/l2/l2.c, tests/depdemo/l3/l3.c, tests/depdemo/l4/l4.c, tests/f77demo/README, tests/f77demo/cprogram.c, tests/f77demo/foof.f, tests/f77demo/foof2.f, tests/f77demo/foof3.f, tests/f77demo/fprogram.f, tests/fcdemo/README, tests/fcdemo/cprogram.c, tests/fcdemo/foof.f90, tests/fcdemo/foof2.f90, tests/fcdemo/foof3.f90, tests/fcdemo/fprogram.f90, tests/mdemo/README, tests/mdemo/main.c, tests/mdemo/mlib.c, tests/objectlist.test, tests/static.at, tests/template.at, tests/testsuite.at: Remove trailing blanks. Signed-off-by: Gary V. Vaughan <gary@gnu.org>
1797 lines
52 KiB
Plaintext
1797 lines
52 KiB
Plaintext
m4_pattern_allow([dnl])
|
|
AS_INIT[]m4_divert_push([HEADER-COPYRIGHT])
|
|
# libtoolize (GNU @PACKAGE@) @VERSION@
|
|
# Written by Gary V. Vaughan <gary@gnu.org>, 2003
|
|
|
|
# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
|
|
# Free Software Foundation, Inc.
|
|
# This is free software; see the source for copying conditions. There is NO
|
|
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
|
|
# Libtoolize is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# Libtoolize is distributed in the hope that it will be useful, but
|
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with libtoolize; see the file COPYING. If not, a copy
|
|
# can be downloaded from http://www.gnu.org/licenses/gpl.html,
|
|
# or obtained by writing to the Free Software Foundation, Inc.,
|
|
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
|
|
# Usage: $progname [OPTION]...
|
|
#
|
|
# Prepare a package to use libtool.
|
|
#
|
|
# -c, --copy copy files rather than symlinking them
|
|
# --debug enable verbose shell tracing
|
|
# -n, --dry-run print commands rather than running them
|
|
# -f, --force replace existing files
|
|
# -i, --install copy missing auxiliary files
|
|
# --ltdl[=DIR] install libltdl sources [default: libltdl]
|
|
# --no-warn don't display warning messages
|
|
# --nonrecursive prepare ltdl for non-recursive make
|
|
# -q, --quiet work silently
|
|
# --recursive prepare ltdl for recursive make
|
|
# --subproject prepare ltdl to configure and build independently
|
|
# -v, --verbose verbosely report processing
|
|
# --version print version information and exit
|
|
# -h, --help print short or long help message
|
|
#
|
|
# The following space or comma delimited options can be passed to $progname
|
|
# via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
|
|
# options are ignored:
|
|
#
|
|
# --debug enable verbose shell tracing
|
|
# --no-warn don't display warning messages
|
|
# --quiet work silently
|
|
# --verbose verbosely report processing
|
|
#
|
|
# You must `cd' to the top directory of your package before you run
|
|
# `$progname'.
|
|
#
|
|
# When reporting a bug, please describe a test case to reproduce it and
|
|
# include the following information:
|
|
#
|
|
# host-triplet: @host_triplet@
|
|
# $progname: (GNU @PACKAGE@) @VERSION@
|
|
# automake: $automake_version
|
|
# autoconf: $autoconf_version
|
|
#
|
|
# Report bugs to <@PACKAGE_BUGREPORT@>.
|
|
# GNU @PACKAGE@ home page: <@PACKAGE_URL@>.
|
|
# General help using GNU software: <http://www.gnu.org/gethelp/>.
|
|
|
|
PROGRAM=libtoolize
|
|
|
|
m4_divert_pop
|
|
m4_include([getopt.m4sh])
|
|
|
|
M4SH_VERBATIM([[
|
|
# Parse environment options
|
|
{
|
|
my_sed_env_opt='1s/^\([^,:; ]*\).*$/\1/;q'
|
|
my_sed_env_rest='1s/^[^,:; ]*[,:; ]*\(.*\)$/\1/;q'
|
|
|
|
while test -n "$LIBTOOLIZE_OPTIONS"; do
|
|
opt=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_opt"`
|
|
LIBTOOLIZE_OPTIONS=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_rest"`
|
|
|
|
case $opt in
|
|
--debug|--no-warn|--quiet|--verbose)
|
|
envopts="${envopts+$envopts }$opt" ;;
|
|
--*) env_warning="${env_warning+$env_warning
|
|
}unrecognized environment option \`$opt'" ;;
|
|
*) func_fatal_help "garbled LIBTOOLIZE_OPTIONS near \`$opt'" ;;
|
|
esac
|
|
done
|
|
|
|
test -n "$envopts" && {
|
|
func_quote_for_eval "$envopts"
|
|
eval set dummy "$func_quote_for_eval_result" ${1+"$@"}
|
|
shift
|
|
}
|
|
}
|
|
]])
|
|
|
|
dnl SHORT LONG DEFAULT INIT
|
|
dnl ----------------------------------------------------------------------
|
|
dnl --automake, below, is for compatibility with automake 1.5
|
|
M4SH_GETOPTS(
|
|
[c], [--copy], [], [],
|
|
[f], [--force], [], [],
|
|
[i], [--install], [], [],
|
|
[n], [--dry-run|--dryrun], [], [
|
|
CP="func_echo_all $CP"
|
|
test -n "$LN_S" && LN_S="func_echo_all $LN_S"
|
|
MKDIR="func_echo_all $MKDIR"
|
|
RM="func_echo_all $RM"],
|
|
[q], [--quiet|--automake], [], [],
|
|
[v], [--verbose], [], [],
|
|
[], [--no-warning|--no-warn], [], [],
|
|
[], [--nonrecursive|--non-recursive], [], [],
|
|
[], [--recursive], [], [],
|
|
[], [--subproject], [], [],
|
|
[?], [--ltdl], [false], [
|
|
# This is tricky, since we're overloading $opt_ltdl to be the
|
|
# optarg for --ltdl during option processing, but then stashing
|
|
# the (optional) optarg in $ltdl_dir and reusing $opt_ltdl to
|
|
# indicate that --ltdl was seen during option processing. Also,
|
|
# be careful that --ltdl=foo --ltdl=bar results in ltdl_dir=bar:
|
|
case $opt_ltdl in
|
|
false|:) ;; # a bare '--ltdl' followed by another option
|
|
*) ltdl_dir=`$ECHO "$optarg" |$SED 's,/*$,,'` ;;
|
|
esac
|
|
opt_ltdl=:],
|
|
[
|
|
# show any warnings saved by LIBTOOLIZE_OPTIONS parsing
|
|
test -n "$env_warning" &&
|
|
echo "$env_warning" |while read line; do func_warning "$line"; done
|
|
|
|
# validate $opt_nonrecursive, $opt_recursive and $opt_subproject
|
|
if $opt_nonrecursive; then
|
|
if $opt_recursive || $opt_subproject; then
|
|
func_error "you can have at most one of --non-recursive, --recursive and --subproject"
|
|
fi
|
|
ltdl_mode=nonrecursive
|
|
elif $opt_recursive; then
|
|
$opt_subproject &&
|
|
func_error "you can have at most one of --non-recursive, --recursive and --subproject"
|
|
ltdl_mode=recursive
|
|
elif $opt_subproject; then
|
|
ltdl_mode=subproject
|
|
fi
|
|
|
|
# any remaining arguments are an error
|
|
test [$]# -gt 0 &&
|
|
func_fatal_help "unknown additional arguments: \`${1+$@}'"
|
|
])
|
|
|
|
|
|
M4SH_VERBATIM([[
|
|
# func_whisper arg...
|
|
# Echo program name prefixed message unless $opt_quiet was given.
|
|
func_whisper ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$opt_quiet || func_echo ${1+"$@"}
|
|
}
|
|
|
|
# func_whisper_once msg_var
|
|
# Call func_whisper with the value of MSG_VAR, and then set MSG_VAR="" so
|
|
# that subsequent calls will have no effect.
|
|
func_whisper_once ()
|
|
{
|
|
$debug_cmd
|
|
|
|
if test -n "$1"; then
|
|
eval my_msg=\$$1
|
|
|
|
if test -n "$my_msg"; then
|
|
func_whisper "$my_msg"
|
|
eval $1=""
|
|
fi
|
|
fi
|
|
}
|
|
|
|
|
|
# func_whisper_hdr msg_var arg...
|
|
# With at least 1 non-empty ARG, call func_whisper_once with MSG_VAR,
|
|
# and then func_whisper with the remaining arguments.
|
|
func_whisper_hdr ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_msg_var=$1; shift
|
|
test -n "$*" || return
|
|
|
|
func_whisper_once "$my_msg_var"
|
|
func_whisper "$*"
|
|
}
|
|
|
|
|
|
# func_whisper_error_hdr msg_var arg...
|
|
# Much the same as func_whisper_header, but for (non-fatal) error
|
|
# messages.
|
|
func_whisper_error_hdr ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_msg_var=$1; shift
|
|
test -n "$*" || return
|
|
|
|
func_whisper_once "$my_msg_var"
|
|
func_error "$*"
|
|
|
|
exit_status=$EXIT_FAILURE
|
|
}
|
|
|
|
|
|
# func_copy filename srcdir destdir [msg_var [filter]]
|
|
# If option `--copy' was specified, or soft-linking SRCFILE to DESTFILE
|
|
# fails, then try to copy SRCFILE to DESTFILE (making sure to update the
|
|
# timestamp so that a series of files with dependencies can be copied
|
|
# in the right order that their timestamps won't trigger rebuilds). If
|
|
# FILTER is non-empty, it is a sed script to apply to SRCFILE as it is
|
|
# copied. MSG_VAR names a variable for use with func_whisper_hdr.
|
|
func_copy ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_filename=$1
|
|
my_srcdir=$2
|
|
my_destdir=$3
|
|
my_msg_var=$4
|
|
my_filter=$5
|
|
|
|
my_srcfile=$my_srcdir/$my_filename
|
|
my_destfile=$my_destdir/$my_filename
|
|
|
|
# Libtool is probably misinstalled if this happens:
|
|
test -f "$my_srcfile" || {
|
|
func_whisper_error_hdr "$my_msg_var" "\`$my_srcfile' not found"
|
|
return 1
|
|
}
|
|
|
|
# Require --force to remove existing $my_destfile.
|
|
$opt_force && $RM "$my_destfile"
|
|
test -f "$my_destfile" && {
|
|
func_whisper_error_hdr "$my_msg_var" \
|
|
"\`$my_destfile' exists: use \`--force' to overwrite"
|
|
return 1
|
|
}
|
|
|
|
# Be careful to support `func_copy dir/target srcbase destbase'.
|
|
func_dirname "$my_destfile"
|
|
func_mkdir_p "$func_dirname_result"
|
|
|
|
# Filters always take priority.
|
|
if test -n "$my_filter"; then
|
|
if $opt_dry_run || {
|
|
( umask 0
|
|
$SED -e "$my_filter" "$my_srcfile" > "$my_destfile"
|
|
) >/dev/null 2>&1
|
|
}
|
|
then
|
|
func_whisper_once "$my_msg_var"
|
|
if $opt_verbose; then
|
|
func_whisper "$SED -e '$my_filter' $my_srcfile > $my_destfile"
|
|
else
|
|
func_whisper "creating file \`$my_destfile'"
|
|
fi
|
|
else
|
|
func_whisper_error_hdr "$my_msg_var" "creating \`$my_destfile' from \`$my_srcfile' failed"
|
|
return 1
|
|
fi
|
|
return 0
|
|
fi
|
|
|
|
# Otherwise copy or link according to `--copy' option.
|
|
if $opt_copy; then
|
|
my_copycmd=$CP
|
|
my_copy_type=copying
|
|
else
|
|
my_copycmd=$LN_S
|
|
my_copy_type=linking
|
|
fi
|
|
my_copy_msg="$my_copy_type file \`$my_destfile'"
|
|
$opt_verbose && my_copy_msg="$my_copycmd $my_srcfile $my_destdir"
|
|
|
|
if $opt_dry_run || {
|
|
( umask 0
|
|
$my_copycmd "$my_srcfile" "$my_destfile"
|
|
) >/dev/null 2>&1
|
|
}
|
|
then
|
|
func_whisper_hdr "$my_msg_var" "$my_copy_msg"
|
|
else
|
|
func_whisper_error_hdr "$my_msg_var" \
|
|
"$my_copy_type \`$my_srcdir/$my_filename' to \`$my_destdir/' failed"
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
|
|
# func_extract_trace macro_name [filename ...]
|
|
# set `$func_extract_trace_result' to a colon delimited list of arguments
|
|
# to MACRO_NAME in FILENAME. If no FILENAME is given, then
|
|
# `configure.ac' is assumed.
|
|
func_extract_trace ()
|
|
{
|
|
$opt_debug
|
|
|
|
if test 1 -eq $#; then
|
|
test -n "$configure_ac" || return
|
|
set dummy "$@" "$configure_ac"; shift
|
|
fi
|
|
|
|
func_extract_trace_result=`$extract_trace ${1+"$@"}`
|
|
}
|
|
|
|
|
|
# func_included_files searchfile
|
|
# Output INCLUDEFILE if SEARCHFILE m4_includes it, else output SEARCHFILE.
|
|
func_included_files ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_searchfile="$1"
|
|
|
|
my_include_regex=
|
|
my_sed_include='
|
|
/^m4@&t@_include(\[.*\])$/ {
|
|
s,^m4@&t@_include(\[\(.*\)\])$,\1,
|
|
p
|
|
}
|
|
d'
|
|
|
|
if test -f "$my_searchfile"; then
|
|
$ECHO "$my_searchfile"
|
|
|
|
# Only recurse when we don't care if all the variables we use get
|
|
# trashed, since they are in global scope.
|
|
for my_filename in `$SED "$my_sed_include" "$my_searchfile"`; do
|
|
func_included_files $my_filename
|
|
done
|
|
fi
|
|
}
|
|
|
|
|
|
# func_serial filename [macro_regex]
|
|
# Output the value of the serial number comment in FILENAME, where the
|
|
# comment line must also match MACRO_REGEX, if given.
|
|
func_serial ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_filename="$1"
|
|
my_macro_regex="$2"
|
|
my_sed_serial='
|
|
/^# serial [1-9][0-9.]*[ ]*'"$my_macro_regex"'[ ]*$/ {
|
|
s,^# serial \([1-9][0-9.]*\).*$,\1,
|
|
q
|
|
}
|
|
d'
|
|
|
|
# Search FILENAME and all the files it m4_includes for a serial number
|
|
# in the file that AC_DEFUNs MACRO_REGEX.
|
|
my_serial=
|
|
func_dirname_and_basename "$my_filename"
|
|
my_filebase=$func_basename_result
|
|
for my_file in `func_included_files "$my_filename"`; do
|
|
if test -z "$my_macro_regex" ||
|
|
test "$my_filename" = aclocal.m4 ||
|
|
test "X$my_macro_regex" = "X$my_filebase" ||
|
|
func_grep '^AC_DEFUN(\@<:@'"$my_macro_regex" "$my_file"
|
|
then
|
|
my_serial=`$SED -e "$my_sed_serial" "$my_file"`
|
|
break
|
|
fi
|
|
done
|
|
|
|
# If the file has no serial number, we assume it's ancient.
|
|
test -n "$my_serial" || my_serial=0
|
|
|
|
$ECHO "$my_serial"
|
|
}
|
|
|
|
|
|
# func_serial_max serial1 serial2
|
|
# Compare (possibly multi-part, '.' delimited) serial numbers, and
|
|
# return the largest in $func_serial_max_result. If they are the
|
|
# same, func_serial_max_result will be empty.
|
|
func_serial_max ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_serial1="$1"
|
|
my_serial2="$2"
|
|
|
|
my_sed_dot='s/\..*$//g'
|
|
my_sed_rest='s/^[0-9][1-9]*\.*//'
|
|
my_sed_digits='s/[^0-9.]//g'
|
|
|
|
# Incase they turn out to be the same, we'll set it to empty
|
|
func_serial_max_result=
|
|
|
|
test "X$1$2" = X`$ECHO "$1$2" | $SED "$my_sed_digits"` || {
|
|
func_error "serial numbers \`$1' or \`$2' contain non-digit chars"
|
|
return
|
|
}
|
|
|
|
while test -n "$my_serial1$my_serial2"; do
|
|
my_serial1_part=`$ECHO "$my_serial1" | $SED "$my_sed_dot"`
|
|
my_serial2_part=`$ECHO "$my_serial2" | $SED "$my_sed_dot"`
|
|
|
|
test -z "$my_serial1_part$my_serial2_part" \
|
|
&& break
|
|
|
|
test -z "$my_serial1_part" \
|
|
&& { func_serial_max_result="$2"; break; }
|
|
|
|
test -z "$my_serial2_part" \
|
|
&& { func_serial_max_result="$1"; break; }
|
|
|
|
test "$my_serial1_part" -gt "$my_serial2_part" \
|
|
&& { func_serial_max_result="$1"; break; }
|
|
|
|
test "$my_serial2_part" -gt "$my_serial1_part" \
|
|
&& { func_serial_max_result="$2"; break; }
|
|
|
|
my_serial1=`$ECHO "$my_serial1" | $SED "$my_sed_rest"`
|
|
my_serial2=`$ECHO "$my_serial2" | $SED "$my_sed_rest"`
|
|
done
|
|
}
|
|
|
|
|
|
# func_serial_update_check srcfile src_serial destfile dest_serial
|
|
# Unless SRC_SERIAL is newer than DEST_SERIAL set $func_serial_update_check
|
|
# to 'false'.
|
|
func_serial_update_check ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_ltdl_dir
|
|
$require_ac_macro_dir
|
|
|
|
my_srcfile="$1"
|
|
my_src_serial="$2"
|
|
my_destfile="$3"
|
|
my_dest_serial="$4"
|
|
my_update_p=:
|
|
|
|
if test -f "$my_destfile"; then
|
|
test "X$my_src_serial" = "X0" && {
|
|
func_warning "no serial number on \`$my_srcfile', not copying."
|
|
return
|
|
}
|
|
|
|
# Determine whether the destination has an older serial.
|
|
func_serial_max "$my_src_serial" "$my_dest_serial"
|
|
test "X$my_src_serial" = "X$func_serial_max_result" || my_update_p=false
|
|
|
|
test "X$my_src_serial" = "X$func_serial_max_result" \
|
|
&& func_verbose "\`$my_srcfile' is serial $my_src_serial, greater than $my_dest_serial in \`$my_destfile'"
|
|
|
|
if test "X$my_dest_serial" = "X$func_serial_max_result"; then
|
|
func_verbose "\`$my_srcfile' is serial $my_src_serial, less than $my_dest_serial in \`$my_destfile'"
|
|
$opt_force || if test -n "$ac_macro_dir$ac_ltdl_dir"; then
|
|
func_error "\`$my_destfile' is newer: use \`--force' to overwrite"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
func_serial_update_check_result="$my_update_p"
|
|
}
|
|
|
|
|
|
# func_aclocal_update_check filename
|
|
# Unless serial number of FILENAME is newer than the matching serial number
|
|
# in aclocal.m4, set $func_aclocal_update_check to 'false'.
|
|
func_aclocal_update_check ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_filename=$1
|
|
|
|
my_srcfile="$aclocaldir/$1"
|
|
my_destfile="aclocal.m4"
|
|
|
|
case $my_filename in
|
|
libtool.m4)
|
|
my_src_serial=`func_serial "$my_srcfile" LT_INIT`
|
|
my_dest_serial=`func_serial "$my_destfile" LT_INIT`
|
|
|
|
# Strictly, this libtoolize ought not to have to deal with ancient
|
|
# serial formats, but we accept them here to be complete:
|
|
test "X$my_src_serial" = "X0" &&
|
|
my_src_serial=`func_serial "$my_srcfile" 'A[CM]_PROG_LIBTOOL'`
|
|
test "X$my_dest_serial" = "X0" &&
|
|
my_dest_serial=`func_serial "$my_destfile" 'A[CM]_PROG_LIBTOOL'`
|
|
;;
|
|
ltdl.m4)
|
|
my_src_serial=`func_serial "$my_srcfile" LTDL_INIT`
|
|
my_dest_serial=`func_serial "$my_destfile" LTDL_INIT`
|
|
;;
|
|
*)
|
|
my_src_serial=`func_serial "$my_srcfile" "$my_filename"`
|
|
my_dest_serial=`func_serial "$my_destfile" "$my_filename"`
|
|
;;
|
|
esac
|
|
|
|
func_serial_update_check \
|
|
"$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
|
|
|
|
func_aclocal_update_check_result="$func_serial_update_check_result"
|
|
}
|
|
|
|
|
|
# func_serial_update filename srcdir destdir [msg_var] [macro_re] [old_macro_re]
|
|
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
|
|
# has a newer serial number, or DESTFILE does not yet exist, or the user
|
|
# specified `--force' at the command line. If given, MACRO_REGEX or
|
|
# OLD_MACRO_REGEX must match any text after "# serial N" in both files.
|
|
func_serial_update ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_filename="$1"
|
|
my_srcdir="$2"
|
|
my_destdir="$3"
|
|
my_msg_var="$4"
|
|
my_macro_regex="$5"
|
|
my_old_macro_regex="$6"
|
|
|
|
my_serial_update_p=:
|
|
my_return_status=1
|
|
my_srcfile="$my_srcdir/$my_filename"
|
|
my_destfile="$my_destdir/$my_filename"
|
|
|
|
test -f "$my_srcfile" || func_fatal_error "\`$my_srcfile' does not exist."
|
|
|
|
if test -f "$my_destfile"; then
|
|
my_src_serial=`func_serial "$my_srcfile" "$my_macro_regex"`
|
|
my_dest_serial=`func_serial "$my_destfile" "$my_macro_regex"`
|
|
|
|
# Strictly, this libtoolize ought not to have to deal with ancient
|
|
# serial formats, but we accept them here to be complete:
|
|
test "X$my_src_serial" = "X0" &&
|
|
my_src_serial=`func_serial "$my_srcfile" "$my_old_macro_regex"`
|
|
|
|
test "X$my_dest_serial" = "X0" &&
|
|
my_dest_serial=`func_serial "$my_destfile" "$my_old_macro_regex"`
|
|
|
|
func_serial_update_check \
|
|
"$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
|
|
my_serial_update_p="$func_serial_update_check_result"
|
|
fi
|
|
|
|
if $my_serial_update_p || $opt_force; then
|
|
$RM "$my_destfile"
|
|
func_copy "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
|
|
my_return_status=$?
|
|
elif $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
|
|
func_whisper_hdr "$my_msg_var" "\`$my_destfile' is already up to date."
|
|
fi
|
|
|
|
# Do this after the copy for hand maintained `aclocal.m4', incase
|
|
# it has `m4_include([DESTFILE])', so the copy effectively already
|
|
# updated `aclocal.m4'.
|
|
my_included_files=`func_included_files aclocal.m4`
|
|
case `echo " "$my_included_files" "` in
|
|
|
|
# Skip included files:
|
|
*" $my_destfile "*) ;;
|
|
|
|
# Otherwise compare to aclocal.m4 serial number (func_serial
|
|
# returns 0 for older macro serial numbers before we provided
|
|
# serial tags, so the update message will be correctly given
|
|
# if aclocal.m4 contains an untagged --i.e older-- macro file):
|
|
*)
|
|
if test -f aclocal.m4; then
|
|
func_serial_max \
|
|
"$my_src_serial" `func_serial aclocal.m4 "$my_macro_regex"`
|
|
if test "X$my_src_serial" = "X$func_serial_max_result"; then
|
|
func_whisper_hdr "$my_msg_var" \
|
|
"You should add the contents of \`$my_destfile' to \`aclocal.m4'."
|
|
fi
|
|
fi
|
|
;;
|
|
esac
|
|
return $my_return_status
|
|
}
|
|
|
|
|
|
# func_keyword_update filename srcdir destdir sed_script [msg_var]
|
|
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
|
|
# has a newer revision according to the serial number extracted by
|
|
# SED_SCRIPT, or DESTFILE does not yet exist, or the user specified
|
|
# `--force' at the command line.
|
|
func_keyword_update ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_filename="$1"
|
|
my_srcdir="$2"
|
|
my_destdir="$3"
|
|
my_sed_script="$4"
|
|
my_msg_var="$5"
|
|
|
|
my_srcfile="$my_srcdir/$my_filename"
|
|
my_destfile="$my_destdir/$my_filename"
|
|
|
|
my_keyword_update_p=:
|
|
|
|
test -f "$my_srcfile" || func_fatal_error "\`$my_srcfile' does not exist."
|
|
|
|
if test -f "$my_destfile"; then
|
|
my_src_serial=`$SED -e "$my_sed_script" "$my_srcfile"`
|
|
test -z "$my_src_serial" && {
|
|
func_warning "no serial number in \`$my_srcfile', not copying."
|
|
return
|
|
}
|
|
|
|
my_dest_serial=`$SED -e "$my_sed_script" "$my_destfile"`
|
|
test -n "$my_dest_serial" || my_dest_serial=0
|
|
|
|
func_serial_update_check \
|
|
"$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
|
|
my_keyword_update_p="$func_serial_update_check_result"
|
|
fi
|
|
|
|
if $my_keyword_update_p || $opt_force; then
|
|
$RM "$my_destfile"
|
|
func_copy "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
|
|
elif $opt_verbose || $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
|
|
func_whisper_hdr "$my_msg_var" "\`$my_destfile' is already up to date."
|
|
fi
|
|
}
|
|
|
|
|
|
# func_ltmain_update filename srcdir destdir [msg_var]
|
|
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
|
|
# has a newer revision, or DESTFILE does not yet exist, or the user
|
|
# specified `--force' at the command line.
|
|
func_ltmain_update ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_sed_ltmain='
|
|
/^package_revision='\''*[0-9][1-9.]*'\''*/ {
|
|
s,^package_revision='\''*\([0-9.]*\)'\''*[ ]*$,\1,
|
|
p
|
|
}
|
|
d'
|
|
|
|
func_keyword_update "$1" "$2" "$3" "$my_sed_ltmain" "$4"
|
|
|
|
return $my_return_status
|
|
}
|
|
|
|
|
|
# func_config_update filename srcdir destdir [msg_var]
|
|
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
|
|
# has a newer timestamp, or DESTFILE does not yet exist, or the user
|
|
# specified `--force' at the command line.
|
|
func_config_update ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_sed_config='
|
|
/^timestamp='\''*[0-9][1-9-]*'\''*/ {
|
|
s,^timestamp='\''*\([0-9-]*\)'\''*,\1,
|
|
s/-/./g
|
|
p
|
|
}
|
|
d'
|
|
|
|
func_keyword_update "$1" "$2" "$3" "$my_sed_config" "$4"
|
|
|
|
return $my_return_status
|
|
}
|
|
|
|
|
|
# func_install_update filename srcdir destdir [msg_var]
|
|
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
|
|
# has a newer timestamp, or DESTFILE does not yet exist, or the user
|
|
# specified `--force' at the command line.
|
|
func_install_update ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_sed_install='
|
|
/^scriptversion='\''*[0-9][1-9.-]*'\''*/ {
|
|
s,[#;].*,,
|
|
s,^scriptversion='\''*\([0-9.-]*\)'\''*,\1,
|
|
s/-/./g
|
|
p
|
|
}
|
|
d'
|
|
|
|
func_keyword_update "$1" "$2" "$3" "$my_sed_install" "$4"
|
|
|
|
return $my_return_status
|
|
}
|
|
|
|
|
|
# func_install_pkgmacro_files
|
|
# Install copies of the libtool and libltdl m4 macros into this package.
|
|
func_install_pkgmacro_files ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_macro_dir
|
|
$require_am_macro_dir
|
|
$require_ltdl_mode
|
|
$require_macro_dir
|
|
|
|
$opt_ltdl || test -n "$ac_macro_dir$am_macro_dir" || return
|
|
|
|
# Remove any lingering files that my have been installed by some
|
|
# previous libtoolize release:
|
|
$opt_force && for file in $all_pkgmacro_files; do
|
|
test -f "$macro_dir/$file" && func_verbose "rm -f '$macro_dir/$file'"
|
|
rm -f "$macro_dir/$file"
|
|
done
|
|
|
|
# Install the libltdl autoconf macros to this project's source tree.
|
|
$opt_quiet || if test -n "$ac_macro_dir"; then
|
|
my_pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$ac_macro_dir'."
|
|
else
|
|
my_pkgmacro_header="putting macros in \`$macro_dir'."
|
|
fi
|
|
|
|
for file in $pkgmacro_files; do
|
|
case $file in
|
|
libtool.m4)
|
|
func_serial_update "$file" "$aclocaldir" "$macro_dir" \
|
|
my_pkgmacro_header LT_INIT 'A[CM]_PROG_LIBTOOL'
|
|
;;
|
|
ltdl.m4)
|
|
if $opt_ltdl; then
|
|
func_serial_update "$file" "$aclocaldir" "$macro_dir" \
|
|
my_pkgmacro_header 'LTDL_INIT'
|
|
else
|
|
func_verbose "Not copying \`$macro_dir/$file', libltdl not used."
|
|
fi
|
|
;;
|
|
ltoptions.m4|ltsugar.m4|ltversion.m4|lt~obsolete.m4)
|
|
func_serial_update "$file" "$aclocaldir" "$macro_dir" \
|
|
my_pkgmacro_header "$file"
|
|
;;
|
|
*)
|
|
if $opt_ltdl; then
|
|
func_serial_update "$file" "$aclocaldir" "$macro_dir" \
|
|
my_pkgmacro_header "$file"
|
|
else
|
|
func_verbose "Not copying \`$macro_dir/$file', libltdl not used."
|
|
fi
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
|
|
|
|
# func_install_pkgltdl_files
|
|
# Install copies of the libltdl files into this package. Any auxiliary
|
|
# or m4 macro files needed in the libltdl tree will also be copied by
|
|
# func_install_pkgaux_files and func_install_pkgmacro_files resp.
|
|
func_install_pkgltdl_files ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$opt_ltdl || return
|
|
|
|
$require_ac_ltdl_dir
|
|
$require_ltdl_dir
|
|
$require_ltdl_mode
|
|
|
|
# Remove any lingering files that my have been installed by some
|
|
# previous libtoolize release:
|
|
$opt_force && for file in $all_pkgltdl_files; do
|
|
test -f "$ltdl_dir/$file" && func_verbose "rm -f '$ltdl_dir/$file'"
|
|
rm -f "$ltdl_dir/$file"
|
|
done
|
|
|
|
# Copy all the files from installed libltdl to this project, if the
|
|
# user specified `--ltdl'.
|
|
$opt_quiet || if test -n "$ac_ltdl_dir"; then
|
|
pkgltdl_header="putting libltdl files in LT_CONFIG_LTDL_DIR, \`$ac_ltdl_dir'."
|
|
else
|
|
pkgltdl_header="putting libltdl files in \`$ltdl_dir'."
|
|
fi
|
|
|
|
$require_Makefile_am_filter
|
|
$require_Makefile_inc_filter
|
|
|
|
# Copy ltdl sources appropriate to the requested ltdl_mode.
|
|
for file in $pkgltdl_files; do
|
|
my_copy_filter=
|
|
case $file in
|
|
Makefile.am|Makefile.in)
|
|
test nonrecursive = "$ltdl_mode" && continue
|
|
my_copy_filter=$Makefile_am_filter
|
|
;;
|
|
|
|
ltdl.mk)
|
|
test nonrecursive = "$ltdl_mode" || continue
|
|
my_copy_filter=$Makefile_inc_filter
|
|
;;
|
|
|
|
aclocal.m4)
|
|
test subproject = "$ltdl_mode" && {
|
|
$require_aclocal_m4_filter
|
|
|
|
# Always copy aclocal.m4, otherwise regenerating it can
|
|
# overwrite the destination if it is symlinked.
|
|
( opt_copy=:
|
|
func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
|
|
pkgltdl_header "$aclocal_m4_filter"
|
|
)
|
|
}
|
|
continue
|
|
;;
|
|
|
|
config-h.in)
|
|
test subproject = "$ltdl_mode" || continue
|
|
;;
|
|
|
|
configure)
|
|
test subproject = "$ltdl_mode" && {
|
|
$require_configure_ac_filter
|
|
|
|
# Always copy configure, otherwise regenerating it can
|
|
# overwrite the destination if it is symlinked.
|
|
( opt_copy=:
|
|
func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
|
|
pkgltdl_header "$configure_ac_filter"
|
|
)
|
|
}
|
|
continue
|
|
;;
|
|
|
|
configure.ac)
|
|
test subproject = "$ltdl_mode" || continue
|
|
$require_configure_ac_filter
|
|
my_copy_filter=$configure_ac_filter
|
|
;;
|
|
esac
|
|
|
|
# Still here? Copy the file then, with selected filters.
|
|
func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
|
|
pkgltdl_header "$my_copy_filter"
|
|
|
|
# FIXME: Remove in 2013
|
|
# (along with deprecation warning in func_check_macros)
|
|
test ltdl.mk = "$file" \
|
|
&& func_grep "^-\?include $ltdl_dir/Makefile.inc\$" Makefile.am \
|
|
&& mv "$ltdl_dir/$file" "$ltdl_dir/Makefile.inc" \
|
|
&& func_whisper "renaming file \`$ltdl_dir/Makefile.inc'"
|
|
done
|
|
}
|
|
|
|
|
|
# func_install_pkgaux_files
|
|
# Install copies of the auxiliary files into this package according to
|
|
# the whether libltdl is included as a subproject, and whether the parent
|
|
# shares the AC_CONFIG_AUX_DIR setting.
|
|
func_install_pkgaux_files ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_aux_dir
|
|
$require_aux_dir
|
|
$require_configure_ac
|
|
$require_ltdl_mode
|
|
|
|
# Remove any lingering files that my have been installed by some
|
|
# previous libtoolize release:
|
|
$opt_force && for file in $all_pkgaux_files; do
|
|
test -f "$aux_dir/$file" && func_verbose "rm -f '$aux_dir/$file'"
|
|
rm -f "$aux_dir/$file"
|
|
done
|
|
|
|
if test -n "$ac_aux_dir"; then
|
|
pkgaux_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$ac_aux_dir'."
|
|
else
|
|
pkgaux_header="putting auxiliary files in \`$aux_dir'."
|
|
fi
|
|
|
|
for file in $pkgaux_files; do
|
|
case $file in
|
|
config.guess|config.sub)
|
|
$opt_install || test subproject = "$ltdl_mode" || continue
|
|
func_config_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
|
|
;;
|
|
install-sh)
|
|
$opt_install || test subproject = "$ltdl_mode" || continue
|
|
func_install_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
|
|
;;
|
|
ltmain.sh)
|
|
func_ltmain_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
|
|
;;
|
|
*)
|
|
test subproject = "$ltdl_mode" || continue
|
|
func_copy "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
|
|
;;
|
|
esac
|
|
done
|
|
|
|
# If the parent project is using Autoconf and linking with Libtool,
|
|
# even if subproject libltdl already has a copy, the parent project
|
|
# will still need to build libtool for its own purposes, and might
|
|
# need another copy of ltmain.sh if the parent didn't declare an
|
|
# AC_CONFIG_AUX_DIR.
|
|
pkgaux_hdr="putting another copy of auxiliary files in \`.'"
|
|
test -f "$configure_ac" \
|
|
&& test -z "$ac_aux_dir" \
|
|
&& test subproject = "$ltdl_mode" \
|
|
&& test "$aux_dir" = "$ltdl_dir" \
|
|
&& func_ltmain_update "$file" "$pkgauxdir" . pkgaux_hdr
|
|
|
|
# FIXME: Remove in 2013.
|
|
# Very old parent projects using `libtoolize --install --ltdl', and
|
|
# a top-level $configure_ac to build the ltdl subproject, but not
|
|
# using Automake themselves, might still be relying on the old
|
|
# behaviour of libtoolize to put a second copy of some `Auxiliary
|
|
# Programs' needed by the top-level configure (instead of using
|
|
# the recommended method: `automake --add-missing').
|
|
test -f "$configure_ac" \
|
|
&& test subproject = "$ltdl_mode" \
|
|
&& test "$aux_dir" = "$ltdl_dir" \
|
|
&& func_config_update config.guess "$pkgauxdir" . pkgaux_hdr \
|
|
&& func_config_update config.sub "$pkgauxdir" . pkgaux_hdr \
|
|
&& func_install_update install-sh "$pkgauxdir" . pkgaux_hdr
|
|
}
|
|
|
|
|
|
# func_nonemptydir_p dirvar
|
|
# DIRVAR is the name of a variable to evaluate. Unless DIRVAR names
|
|
# a directory that exists and is non-empty abort with a diagnostic.
|
|
func_nonemptydir_p ()
|
|
{
|
|
$debug_cmd
|
|
|
|
my_dirvar="$1"
|
|
my_dir=`eval echo "\\\$$my_dirvar"`
|
|
|
|
# Is it a directory at all?
|
|
test -d "$my_dir" \
|
|
|| func_fatal_error "\$$my_dirvar is not a directory: \`$my_dir'"
|
|
|
|
# check that the directories contents can be ls'ed
|
|
test -n "`{ cd $my_dir && ls; } 2>/dev/null`" \
|
|
|| func_fatal_error "cannot list files: \`$my_dir'"
|
|
}
|
|
|
|
|
|
# func_check_macros
|
|
# Sanity check macros from aclocal.m4 against installed versions.
|
|
func_check_macros ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_ltdl_dir
|
|
$require_ac_macro_dir
|
|
$require_am_macro_dir
|
|
$require_aux_dir
|
|
$require_configure_ac
|
|
$require_ltdl_dir
|
|
$require_ltdl_mode
|
|
$require_macro_dir
|
|
$require_seen_ltdl
|
|
$require_seen_libtool
|
|
|
|
$opt_quiet && return
|
|
test -n "$configure_ac" || return
|
|
|
|
ac_config_macro_dir_advised=false
|
|
|
|
if test -z "$ac_macro_dir$am_macro_dir"; then
|
|
my_missing=
|
|
for file in $pkgmacro_files; do
|
|
case $file in
|
|
argz.m4|ltdl.m4) $opt_ltdl || continue ;;
|
|
esac
|
|
if test -f "aclocal.m4"; then
|
|
func_aclocal_update_check $file
|
|
$func_aclocal_update_check_result || continue
|
|
fi
|
|
my_missing="$my_missing $file"
|
|
done
|
|
|
|
if test -n "$my_missing"; then
|
|
func_echo "You should add the contents of the following files to \`aclocal.m4':"
|
|
for need in $my_missing; do
|
|
func_echo " \`$aclocaldir/$need'"
|
|
done
|
|
fi
|
|
fi
|
|
|
|
## ---------------------------------------------------------- ##
|
|
## Since we return early here when --no-warn was given: ##
|
|
## DO NOT PUT ANYTHING BUT UPGRADE ADVICE MESSAGES BELOW HERE ##
|
|
## ---------------------------------------------------------- ##
|
|
|
|
$opt_warning || return
|
|
|
|
$seen_libtool ||
|
|
func_echo "Remember to add \`LT_INIT' to $configure_ac."
|
|
|
|
# Suggest using LTDL_INIT if appropriate:
|
|
$opt_ltdl && if test x$seen_ltdl != x:; then
|
|
case $ltdl_mode in
|
|
subproject) ltdl_init_args="" ;;
|
|
*) ltdl_init_args="([$ltdl_mode])" ;;
|
|
esac
|
|
func_echo "Remember to add \`LTDL_INIT$ltdl_init_args' to $configure_ac."
|
|
fi
|
|
|
|
if $opt_ltdl; then
|
|
# Remind the user to call LT_CONFIG_LTDL_DIR:
|
|
test -n "$ac_ltdl_dir" ||
|
|
func_echo "Remember to add \`LT_CONFIG_LTDL_DIR([$ltdl_dir])' to \`$configure_ac'."
|
|
|
|
# For nonrecursive mode, warn about continued use of Makefile.inc:
|
|
# FIXME: Remove in 2013
|
|
# (along with last minute rename in func_install_pkgltdl_files)
|
|
if test "x$ltdl_mode" = "xnonrecursive"; then
|
|
if func_grep "^-\?include $ltdl_dir/Makefile.inc\$" Makefile.am;
|
|
then
|
|
func_error "Use of \`include $ltdl_dir/Makefile.inc' is deprecated!"
|
|
func_echo "Consider updating to use of \`include $ltdl_dir/ltdl.mk' in Makefile.am."
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# Suggest modern idioms for storing autoconf macros:
|
|
$ac_config_macro_dir_advised || if test -z "$ac_macro_dir" || test x"$macro_dir" = x.; then
|
|
func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([m4])' to $configure_ac and"
|
|
func_echo "rerunning $progname, to keep the correct libtool macros in-tree."
|
|
ac_config_macro_dir_advised=:
|
|
|
|
elif test -z "$ac_macro_dir"; then
|
|
func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([$macro_dir])' to $configure_ac,"
|
|
func_echo "and rerunning $progname and aclocal."
|
|
ac_config_macro_dir_advised=:
|
|
fi
|
|
|
|
if test -z "$am_macro_dir$ac_macro_dir"; then
|
|
func_echo "Consider adding \`-I m4' to ACLOCAL_AMFLAGS in Makefile.am."
|
|
|
|
elif test -z "$am_macro_dir"; then
|
|
func_echo "Consider adding \`-I $macro_dir' to ACLOCAL_AMFLAGS in Makefile.am."
|
|
fi
|
|
|
|
# Don't trace for this, we're just checking the user didn't invoke it
|
|
# directly from configure.ac.
|
|
$SED 's,dnl .*$,,; s,# .*$,,' "$configure_ac" | grep AC_PROG_RANLIB >/dev/null &&
|
|
func_echo "\`AC_PROG_RANLIB' is rendered obsolete by \`LT_INIT'"
|
|
|
|
# FIXME: Ensure ltmain.sh, libtool.m4 and ltdl.m4 are from the same release
|
|
}
|
|
|
|
|
|
|
|
## ------------------##
|
|
## Helper functions. ##
|
|
## ------------------##
|
|
|
|
# This section contains the helper functions used by the rest of
|
|
# this script.
|
|
|
|
|
|
# func_autoconf_configure MAYBE-CONFIGURE-FILE
|
|
# ------------------------------------------
|
|
# Ensure that MAYBE-CONFIGURE-FILE is the name of a file in the current
|
|
# directory which contains an uncommented call to AC_INIT.
|
|
func_autoconf_configure ()
|
|
{
|
|
$debug_cmd
|
|
|
|
_G_sed_no_comment='s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,;'
|
|
_G_ac_init=
|
|
|
|
# If we were passed a genuine file, make sure it calls AC_INIT.
|
|
test -f "$1" \
|
|
&& _G_ac_init=`$SED "$_G_sed_no_comment" "$1" |grep AC_INIT`
|
|
|
|
# Otherwise it is not a genuine Autoconf input file.
|
|
test -n "$_G_ac_init"
|
|
_G_status=$?
|
|
|
|
test "$_G_status" -ne 0 \
|
|
&& func_verbose "\`$1' not using Autoconf"
|
|
|
|
(exit $_G_status)
|
|
}
|
|
|
|
|
|
## -------------------- ##
|
|
## Resource management. ##
|
|
## -------------------- ##
|
|
|
|
# This section contains definitions for functions that each ensure a
|
|
# particular resource (a file, or a non-empty configuration variable for
|
|
# example) is available, and if appropriate to extract default values
|
|
# from pertinent package files. Where a variable already has a non-
|
|
# empty value (as set by the package's `bootstrap.conf'), that value is
|
|
# used in preference to deriving the default. Call them using their
|
|
# associated `require_*' variable to ensure that they are executed, at
|
|
# most, once.
|
|
#
|
|
# Some of the require functions are very similar, so we generate those
|
|
# as this file is sourced. They look complicated, but they are the same
|
|
# as normal function declarations wrapped in "eval '<definition>'", so
|
|
# that embedded single quotes need to be escaped, and wherever a symbol
|
|
# is generated, we drop out of the single quotes and expand a variable
|
|
# that holds the symbol.
|
|
#
|
|
# After that, the rest appear in asciibetical order.
|
|
|
|
for base in aux_dir macro_dir; do
|
|
|
|
# require_ltdl_relative_aux_dir
|
|
# require_ltdl_relative_macro_dir
|
|
# -------------------------------
|
|
# Set ltdl_relative_aux_dir to the relative path from $ltdl_dir to
|
|
# the parent project auxiliary directory, and similarly for relative
|
|
# macro directory.
|
|
r=ltdl_relative_$base # _r_esource acquired by calling this function
|
|
v=require_$r # _v_ariable pointing to the function
|
|
f=func_$v # _f_unction name
|
|
eval $v'='$f'
|
|
'$f' ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ltdl_dir
|
|
$require_'$base'
|
|
|
|
func_relative_path "$ltdl_dir" "$'$base'"
|
|
'$r'=$func_relative_path_result
|
|
|
|
test -n "$'$r'" && func_verbose "'$r'='\'\$$r\''"
|
|
|
|
'$v'=:
|
|
}'
|
|
# Some of these functions need to acquire the resource managed by the
|
|
# lexically preceding function; $o serves that purpose.
|
|
o=$r
|
|
|
|
done
|
|
|
|
for base in '' ltdl_; do
|
|
if test ltdl_ = "$base"; then p='$pkgltdldir/'; else p=; fi
|
|
|
|
# require_Makefile_am
|
|
# require_ltdl_Makefile_am
|
|
# ------------------------
|
|
# If not already set, set Makefile_am to `Makefile.am' if that file is
|
|
# present in the current directory, and similarly for
|
|
# `$pkgltdldir/Makefile.am'.
|
|
r=${base}Makefile_am
|
|
v=require_$r
|
|
f=func_$v
|
|
eval $v'='$f'
|
|
'$f' ()
|
|
{
|
|
$debug_cmd
|
|
|
|
test -n "$'$r'" || '$r'='$p'Makefile.am
|
|
|
|
if test -f "$'$r'"; then
|
|
func_verbose "found \`$'$r\''"
|
|
else
|
|
'$r'=
|
|
fi
|
|
|
|
'$v'=:
|
|
}'
|
|
o=$r
|
|
|
|
|
|
# require_aclocal_amflags
|
|
# require_ltdl_aclocal_amflags
|
|
# ----------------------------
|
|
# Extract `$aclocal_amflags' from `Makefile.am' if present, and
|
|
# similarly for `libltdl/Makefile.am'.
|
|
r=${base}aclocal_amflags
|
|
v=require_$r
|
|
f=func_$v
|
|
eval $v'='$f'
|
|
'$f' ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_'$o'
|
|
|
|
test -n "$'$o'" && {
|
|
_G_sed_extract_aclocal_amflags='\''s|#.*$||
|
|
/^[ ]*ACLOCAL_AMFLAGS[ ]*=/ {
|
|
s|^.*=[ ]*\(.*\)|'$r'="\1"|
|
|
p
|
|
}'\''
|
|
|
|
_G_aclocal_flags_cmd=`$SED -n "$_G_sed_extract_aclocal_amflags" \
|
|
"$'$o'"`
|
|
eval "$_G_aclocal_flags_cmd"
|
|
|
|
test -n "$'$r'" && func_verbose "'$r'='\$$r\''"
|
|
}
|
|
|
|
'$v'=:
|
|
}'
|
|
o=$r
|
|
|
|
|
|
# require_am_macro_dir
|
|
# require_ltdl_am_macro_dir
|
|
# -------------------------
|
|
# Set am_macro_dir to the first directory specified in
|
|
# ACLOCAL_AMFLAGS from `Makefile.am', and similarly for
|
|
# 'libltdl/Makefile.am'.
|
|
r=${base}am_macro_dir
|
|
v=require_$r
|
|
f=func_$v
|
|
eval $v'='$f'
|
|
'$f' ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_'$o'
|
|
|
|
_G_minus_I_seen=false
|
|
for _G_arg in $'$o'; do
|
|
case $_G_minus_I_seen,$_G_arg in
|
|
:,*) '$r'=$_G_arg; break ;;
|
|
*,-I) _G_minus_I_seen=: ;;
|
|
*,-I*) '$r'=`expr x$_G_opt : '\''x-I\(.*\)$'\''`; break ;;
|
|
esac
|
|
done
|
|
|
|
test -n "$'$r'" && func_verbose "'$r'='\'\$$r\''"
|
|
|
|
'$v'=:
|
|
}'
|
|
o=$r
|
|
|
|
done
|
|
|
|
|
|
# require_Makefile_am_filter
|
|
# --------------------------
|
|
# Set `Makefile_am_filter' ready for passing to func_copy when libltdl's
|
|
# stock Makefile.am contents need to be filtered to work in recursive
|
|
# mode.
|
|
require_Makefile_am_filter=func_require_Makefile_am_filter
|
|
func_require_Makefile_am_filter ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ltdl_mode
|
|
|
|
case $ltdl_mode in
|
|
recursive)
|
|
Makefile_am_filter='
|
|
/^[^#]/{
|
|
s,(LIBOBJS),(ltdl_LIBOBJS),g
|
|
s,(LTLIBOBJS),(ltdl_LTLIBOBJS),g
|
|
}'
|
|
;;
|
|
|
|
subproject)
|
|
$require_ltdl_ac_aux_dir
|
|
$require_ltdl_am_macro_dir
|
|
$require_ltdl_relative_aux_dir
|
|
$require_ltdl_relative_macro_dir
|
|
|
|
test "$ltdl_am_macro_dir" = "$ltdl_relative_macro_dir" || {
|
|
my_am_macro_dir_regex=`$ECHO "\
|
|
$ltdl_am_macro_dir" |$SED "$sed_make_literal_regex"`
|
|
|
|
Makefile_am_filter="
|
|
/^ACLOCAL_AMFLAGS = /{
|
|
s, -I $my_am_macro_dir_regex\$, -I $ltdl_relative_macro_dir,
|
|
}
|
|
s,dir)/$my_am_macro_dir_regex,dir)/$ltdl_relative_macro_dir,g"
|
|
}
|
|
|
|
test "$ltdl_ac_aux_dir" = "$ltdl_relative_aux_dir" || {
|
|
my_aux_dir_regex=`$ECHO "\
|
|
$ltdl_ac_aux_dir" |$SED "$sed_make_literal_regex"`
|
|
|
|
Makefile_am_filter="$Makefile_am_filter
|
|
s,$my_aux_dir_regex,$ltdl_relative_aux_dir,g
|
|
s,/\./,/,g
|
|
"
|
|
}
|
|
;;
|
|
esac
|
|
|
|
require_Makefile_am_filter=:
|
|
}
|
|
|
|
|
|
# require_Makefile_inc_filter
|
|
# ---------------------------
|
|
# Set `Makefile_inc_filter' ready for passing to func_copy in order for
|
|
# the contents of Makefile.inc to match the nonrecursive libltdl
|
|
# directory into which it is copied.
|
|
require_Makefile_inc_filter=func_require_Makefile_inc_filter
|
|
func_require_Makefile_inc_filter ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ltdl_dir
|
|
|
|
# Note that we strip comments right here, rather than rely on
|
|
# using a $SED that allows comments.
|
|
my_uscore=`$ECHO "$ltdl_dir" | $SED 's,[/.+-],_,g'`
|
|
Makefile_inc_filter=`$ECHO '
|
|
/^[^#]/{
|
|
|
|
# Use only libltdl conditional objects.
|
|
s,(LIBOBJS),(ltdl_LIBOBJS),g
|
|
s,(LTLIBOBJS),(ltdl_LTLIBOBJS),g
|
|
|
|
# Convert libltdl path and variable sections to $ltdl_dir.
|
|
s,libltdl_,@my_uscore@_,
|
|
s,libltdl/,@ltdl_dir@/,
|
|
s,: libltdl/,: @ltdl_dir@/,
|
|
s, -Ilibltdl , -I@ltdl_dir@ ,
|
|
s,\$(libltdl_,\$(@my_uscore@_,
|
|
s,)/libltdl ,)/@ltdl_dir@ ,
|
|
s,@my_uscore@,'"$my_uscore"',g
|
|
s,@ltdl_dir@,'"$ltdl_dir"',g
|
|
|
|
}' | $SED '/^[ ]*#/d;/^$/d'`
|
|
|
|
require_Makefile_inc_filter=:
|
|
}
|
|
|
|
|
|
# require_ac_aux_dir
|
|
# ------------------
|
|
# Extract ac_aux_dir from AC_CONFIG_AUX_DIR.
|
|
require_ac_aux_dir=func_require_ac_aux_dir
|
|
func_require_ac_aux_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_configure_ac
|
|
|
|
test -n "$configure_ac" && {
|
|
func_extract_trace AC_CONFIG_AUX_DIR
|
|
ac_aux_dir=$func_extract_trace_result
|
|
|
|
case $ac_aux_dir in
|
|
*\$*)
|
|
func_fatal_error "\
|
|
cannot expand unknown variable in AC_CONFIG_AUX_DIR argument."
|
|
;;
|
|
esac
|
|
}
|
|
|
|
test -n "$ac_aux_dir" && func_verbose "ac_aux_dir='$ac_aux_dir'"
|
|
|
|
require_ac_aux_dir=:
|
|
}
|
|
|
|
|
|
# require_ac_ltdl_dir
|
|
# -------------------
|
|
# Extract ac_ltdl_dir from LT_CONFIG_LTDL_DIR.
|
|
require_ac_ltdl_dir=func_require_ac_ltdl_dir
|
|
func_require_ac_ltdl_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_configure_ac
|
|
|
|
if test -n "$configure_ac"; then
|
|
func_extract_trace LT_CONFIG_LTDL_DIR
|
|
ac_ltdl_dir=`expr "$func_extract_trace_result" : '\([^:]*\)'`
|
|
|
|
case $ac_ltdl_dir in
|
|
*\$*)
|
|
func_fatal_error "\
|
|
cannot expand unknown variable in LT_CONFIG_LTDL_DIR argument."
|
|
;;
|
|
esac
|
|
fi
|
|
|
|
# Strip trailing slashes.
|
|
ac_ltdl_dir=`echo "$ac_ltdl_dir" |$SED 's,/*$,,'`
|
|
|
|
require_ac_ltdl_dir=:
|
|
}
|
|
|
|
|
|
# require_ac_ltdl_mode
|
|
# --------------------
|
|
# Extract mode name from LTDL_INIT options.
|
|
require_ac_ltdl_mode=func_require_ac_ltdl_mode
|
|
func_require_ac_ltdl_mode ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_ltdl_options
|
|
|
|
case " $ac_ltdl_options " in
|
|
*" nonrecursive "*) ac_ltdl_mode=nonrecursive ;;
|
|
*" recursive "*) ac_ltdl_mode=recursive ;;
|
|
*" subproject "*) ac_ltdl_mode=subproject ;;
|
|
esac
|
|
|
|
require_ac_ltdl_mode=:
|
|
}
|
|
|
|
|
|
# require_ac_ltdl_options
|
|
# -----------------------
|
|
# Extract ac_ltdl_options from LTDL_INIT.
|
|
require_ac_ltdl_options=func_require_ac_ltdl_options
|
|
func_require_ac_ltdl_options ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_configure_ac
|
|
|
|
if test -n "$configure_ac"; then
|
|
func_extract_trace LTDL_INIT
|
|
ac_ltdl_options=$func_extract_trace_result
|
|
|
|
case $ac_ltdl_options in
|
|
*\$*)
|
|
func_fatal_error "\
|
|
cannot expand unknown variable in LTDL_INIT argument."
|
|
;;
|
|
esac
|
|
fi
|
|
|
|
require_ac_ltdl_mode=:
|
|
}
|
|
|
|
|
|
# require_ac_macro_dir
|
|
# --------------------
|
|
# Extract ac_macro_dir from AC_CONFIG_MACRO_DIR.
|
|
require_ac_macro_dir=func_require_ac_macro_dir
|
|
func_require_ac_macro_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_configure_ac
|
|
|
|
if test -n "$configure_ac"; then
|
|
func_extract_trace AC_CONFIG_MACRO_DIR
|
|
ac_macro_dir=$func_extract_trace_result
|
|
fi
|
|
|
|
require_ac_macro_dir=:
|
|
}
|
|
|
|
|
|
# require_aclocal_m4_filter
|
|
# -------------------------
|
|
# Set `aclocal_m4_filter' ready for passing to func_copy when libltdl's
|
|
# stock aclocal.m4 contents need to be filtered to work in recursive
|
|
# mode.
|
|
require_aclocal_m4_filter=func_require_aclocal_m4_filter
|
|
func_require_aclocal_m4_filter ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ltdl_am_macro_dir
|
|
$require_ltdl_relative_macro_dir
|
|
|
|
test "$ltdl_am_macro_dir" = "$ltdl_relative_macro_dir" || {
|
|
my_am_macro_dir_regex=`$ECHO "\
|
|
$ltdl_am_macro_dir" |$SED "$sed_make_literal_regex"`
|
|
|
|
# Tricky [m] quoting to stop m4sh processing from flagging an
|
|
# undefined macro.
|
|
aclocal_m4_filter="
|
|
/^[m]4_include(/{
|
|
s,$my_am_macro_dir_regex,$ltdl_relative_macro_dir,g
|
|
}"
|
|
}
|
|
|
|
require_aclocal_m4_filter=:
|
|
}
|
|
|
|
|
|
# require_aux_dir
|
|
# ---------------
|
|
# Set aux_dir according to AC_CONFIG_AUX_DIR or else use the same
|
|
# heuristics as Autoconf to intuit an appropriate setting.
|
|
require_aux_dir=func_require_aux_dir
|
|
func_require_aux_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_aux_dir
|
|
|
|
test -z "$aux_dir" && aux_dir=$ac_aux_dir
|
|
|
|
# Subproject ltdl without $configure_ac keeps pkgauxfiles in
|
|
# specified --ltdl optarg directory.
|
|
test -z "$aux_dir" && $opt_ltdl && {
|
|
$require_configure_ac
|
|
|
|
test -n "$configure_ac" || {
|
|
$require_ltdl_dir
|
|
$require_ltdl_mode
|
|
|
|
test subproject = "$ltdl_mode" && aux_dir="$ltdl_dir"
|
|
}
|
|
}
|
|
|
|
test -z "$aux_dir" && {
|
|
# Try to intuit aux_dir using the same heuristic as Autoconf.
|
|
for _G_dir in . .. ../..; do
|
|
if test -f "$_G_dir/install-sh" || test -f "$_G_dir/install.sh"
|
|
then
|
|
aux_dir=$_G_dir
|
|
break
|
|
fi
|
|
done
|
|
}
|
|
|
|
# Use the current directory if all else fails.
|
|
test -z "$aux_dir" && aux_dir=.
|
|
|
|
require_aux_dir=:
|
|
}
|
|
|
|
|
|
# require_configure_ac
|
|
# --------------------
|
|
# Ensure that there is a `configure.ac' or `configure.in' file in this
|
|
# directory, and that `$configure_ac' contains its name.
|
|
require_configure_ac=func_require_configure_ac
|
|
func_require_configure_ac ()
|
|
{
|
|
$debug_cmd
|
|
|
|
test -z "$configure_ac" \
|
|
&& func_autoconf_configure configure.ac && configure_ac=configure.ac
|
|
test -z "$configure_ac" \
|
|
&& func_autoconf_configure configure.in && configure_ac=configure.in
|
|
test -z "$configure_ac" \
|
|
|| func_verbose "found \`$configure_ac'"
|
|
|
|
require_configure_ac=:
|
|
}
|
|
|
|
|
|
# require_configure_ac_filter
|
|
# ---------------------------
|
|
# Set `configure_ac_filter' ready for passing to func_copy when
|
|
# libltdl's stock configure.ac contents need to be filtered to work in
|
|
# subproject mode.
|
|
require_configure_ac_filter=func_require_configure_ac_filter
|
|
func_require_configure_ac_filter ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ltdl_ac_aux_dir
|
|
$require_ltdl_relative_aux_dir
|
|
|
|
test "$ltdl_ac_aux_dir" = "$ltdl_relative_aux_dir" || {
|
|
my_aux_dir_regex=`$ECHO "\
|
|
$ltdl_ac_aux_dir" |$SED "$sed_make_literal_regex"`
|
|
|
|
configure_ac_filter="
|
|
s,$my_aux_dir_regex,$ltdl_relative_aux_dir,g
|
|
"
|
|
}
|
|
|
|
require_configure_ac_filter=:
|
|
}
|
|
|
|
|
|
# require_ltdl_ac_aux_dir
|
|
# -----------------------
|
|
# This needs to work in subproject mode, when GNU M4 may not be
|
|
# available and hence extract-trace can't be used. But since we
|
|
# installed libltdl/configure.ac, then we already know what value
|
|
# we used.
|
|
require_ltdl_ac_aux_dir=func_require_ltdl_ac_aux_dir
|
|
func_require_ltdl_ac_aux_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
ltdl_ac_aux_dir="@ltdl_ac_aux_dir@"
|
|
func_verbose "ltdl_ac_aux_dir='$ltdl_ac_aux_dir'"
|
|
|
|
require_ltdl_ac_aux_dir=:
|
|
}
|
|
|
|
|
|
# require_ltdl_dir
|
|
# ----------------
|
|
# If both are specified, ensure both --ltdl=LTDL_DIR and
|
|
# LT_CONFIG_LTDL_DIR agree, and set ltdl_dir to the value of either.
|
|
require_ltdl_dir=func_require_ltdl_dir
|
|
func_require_ltdl_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_ltdl_dir
|
|
|
|
test -z "$ltdl_dir" && ltdl_dir=$ac_ltdl_dir
|
|
test -z "$ltdl_dir" && $opt_ltdl && ltdl_dir=libltdl
|
|
|
|
if test -n "$ac_ltdl_dir"; then
|
|
test "$ac_ltdl_dir" = "$ltdl_dir" || func_fatal_error "\
|
|
--ltdl='$ltdl_dir' does not match LT_CONFIG_LTDL_DIR($ac_ltdl_dir)"
|
|
fi
|
|
|
|
require_ltdl_dir=:
|
|
}
|
|
|
|
|
|
# require_ltdl_mode
|
|
# -----------------
|
|
# If both are specified, ensure both command line setting and LTDL_INIT
|
|
# option agree, and set ltdl_mode to the value of either.
|
|
require_ltdl_mode=func_require_ltdl_mode
|
|
func_require_ltdl_mode ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_ltdl_mode
|
|
|
|
test -z "$ltdl_mode" && ltdl_mode=$ac_ltdl_mode
|
|
test -z "$ltdl_mode" && {
|
|
$require_ltdl_dir
|
|
|
|
test -n "$ltdl_dir" && ltdl_mode=subproject
|
|
}
|
|
|
|
if test -n "$ac_ltdl_mode"; then
|
|
test "$ac_ltdl_mode" = "$ltdl_mode" || func_fatal_error "\
|
|
--$ltdl_mode does not match LTDL_INIT($ac_ltdl_mode)"
|
|
fi
|
|
|
|
func_verbose "ltdl mode='$ltdl_mode'"
|
|
|
|
require_ltdl_mode=:
|
|
}
|
|
|
|
|
|
# require_macro_dir
|
|
# -----------------
|
|
# If both are specified, ensure both ACLOCAL_AMFLAGS and
|
|
# AC_CONFIG_MACRO_DIR agree, and set macro_dir to the value of either.
|
|
require_macro_dir=func_require_macro_dir
|
|
func_require_macro_dir ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_ac_macro_dir
|
|
$require_am_macro_dir
|
|
|
|
# AC_CONFIG_MACRO_DIR takes precedence.
|
|
macro_dir=$ac_macro_dir
|
|
|
|
# Followed by first -I optarg from ACLOCAL_AMFLAGS.
|
|
test -z "$macro_dir" && macro_dir=$am_macro_dir
|
|
|
|
# Subproject ltdl without either of the above keeps macros in
|
|
# specified --ltdl optarg subdirectory.
|
|
test -z "$macro_dir" && $opt_ltdl && {
|
|
$require_ltdl_dir
|
|
$require_ltdl_mode
|
|
|
|
test subproject = "$ltdl_mode" && macro_dir="$ltdl_dir/m4"
|
|
}
|
|
|
|
# Use ./m4 as the last resort.
|
|
test -z "$macro_dir" && macro_dir=m4
|
|
|
|
# Diagnose conflicts.
|
|
if test -n "$ac_macro_dir" && test -n "$am_macro_dir"; then
|
|
test "$ac_macro_dir" = "$am_macro_dir" || func_fatal_error "\
|
|
AC_CONFIG_MACRO_DIR([$ac_macro_dir]) conflicts with ACLOCAL_AMFLAGS=-I $am_macro_dir."
|
|
fi
|
|
|
|
require_macro_dir=:
|
|
}
|
|
|
|
|
|
# require_seen_ltdl
|
|
# -----------------
|
|
# Determine from contents of $configure_ac whether this project contains
|
|
# libltdl.
|
|
require_seen_ltdl=func_require_seen_ltdl
|
|
func_require_seen_ltdl ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_configure_ac
|
|
|
|
if test -n "$configure_ac"; then
|
|
func_extract_trace AC_LIB_LTDL,AC_WITH_LTDL,LT_WITH_LTDL,LTDL_INIT
|
|
test -n "$func_extract_trace_result" && seen_ltdl=:
|
|
fi
|
|
test -n "$seen_ltdl" || seen_ltdl=false
|
|
|
|
require_seen_ltdl=:
|
|
}
|
|
|
|
|
|
# require_seen_libtool
|
|
# --------------------
|
|
# Determine from contents of $configure_ac whether this project is using
|
|
# Libtool to compile (some of) its objects.
|
|
require_seen_libtool=func_require_seen_libtool
|
|
func_require_seen_libtool ()
|
|
{
|
|
$debug_cmd
|
|
|
|
$require_configure_ac
|
|
|
|
if test -n "$configure_ac"; then
|
|
func_extract_trace AM_PROG_LIBTOOL,AC_PROG_LIBTOOL,LT_INIT
|
|
test -n "$func_extract_trace_result" && seen_libtool=:
|
|
fi
|
|
test -n "$seen_libtool" || seen_libtool=false
|
|
|
|
require_seen_libtool=:
|
|
}
|
|
|
|
|
|
|
|
## ----------- ##
|
|
## Main. ##
|
|
## ----------- ##
|
|
|
|
{
|
|
# Lists of all files libtoolize has ever installed. These are removed
|
|
# before installing the latest files when --force was passed to help
|
|
# ensure a clean upgrade.
|
|
# Do not remove config.guess nor config.sub, we don't install them
|
|
# without --install, and the project may not be using Automake.
|
|
all_pkgaux_files="compile install-sh depcomp missing ltmain.sh snippet/_Noreturn.h snippet/arg-nonnull.h snippet/c++defs.h snippet/warn-on-use.h"
|
|
all_pkgmacro_files="argz.m4 libtool.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.in ltversion.m4 lt~obsolete.m4"
|
|
all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am README acinclude.m4 aclocal.m4 argz_.h argz.c config.h.in config-h.in configure configure.ac configure.in libltdl/lt__alloc.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h ltdl.mk slist.c"
|
|
|
|
# Files installed by func_install_*, some files are missing from these
|
|
# lists deliberately because their respective func_install has to handle
|
|
# the missing filenames specially.
|
|
pkgaux_files="@pkgaux_files@"
|
|
pkgltdl_files="@pkgltdl_files@"
|
|
pkgmacro_files="@pkgmacro_files@"
|
|
|
|
# Locations for important files:
|
|
prefix=@prefix@
|
|
datadir=@datadir@
|
|
pkgauxdir=@pkgauxdir@
|
|
pkgltdldir=@pkgdatadir@
|
|
aclocaldir=@aclocaldir@
|
|
|
|
# Allow the user to override the master libtoolize repository:
|
|
if test -n "$_lt_pkgdatadir"; then
|
|
pkgauxdir="$_lt_pkgdatadir/build-aux"
|
|
pkgltdldir="$_lt_pkgdatadir/libltdl"
|
|
aclocaldir="$_lt_pkgdatadir/m4"
|
|
fi
|
|
func_nonemptydir_p pkgauxdir
|
|
func_nonemptydir_p pkgltdldir
|
|
func_nonemptydir_p aclocaldir
|
|
|
|
extract_trace=$pkgauxdir/extract-trace
|
|
|
|
# :::BE CAREFUL HERE:::
|
|
# func_check_macros needs to check whether --ltdl was specified when
|
|
# LTDL_INIT was not seen, so we can't just use one variable for both
|
|
# conditions, or that check will be impossible. No need to clutter the
|
|
# rest of the code with '$opt_ltdl || $seen_ltdl' though, because we CAN
|
|
# safely set opt_ltdl to true if LTDL_INIT was seen:
|
|
$require_seen_ltdl
|
|
$seen_ltdl && opt_ltdl=:
|
|
|
|
func_install_pkgaux_files
|
|
func_install_pkgmacro_files
|
|
func_install_pkgltdl_files
|
|
|
|
func_check_macros
|
|
}
|
|
|
|
exit $exit_status
|
|
|
|
# Local Variables:
|
|
# mode:shell-script
|
|
# sh-indentation:2
|
|
# End:
|
|
]])
|