# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- ## Copyright 1996, 1997, 1998, 1999, 2000, 2001 ## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit , 1996 ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. # serial 47 AC_PROG_LIBTOOL # ------------------------- AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ])])# AC_PROG_LIBTOOL # _AC_PROG_LIBTOOL # ---------------- AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion define([AC_PROG_LIBTOOL], []) ])# _AC_PROG_LIBTOOL # AC_LIBTOOL_SETUP # ---------------- AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl AC_LIBTOOL_SYS_MAX_CMD_LEN AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE AC_LIBTOOL_OBJDIR AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" fi # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], enable_win32_dll=yes, enable_win32_dll=no) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes AC_ARG_WITH(pic, [ --with-pic try to use only PIC/non-PIC objects [default=use both]], pic_mode="$withval", pic_mode=default) test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= AC_LIBTOOL_LANG_C_CONFIG _LT_AC_TAGCONFIG ])# AC_LIBTOOL_SETUP # _LT_AC_SYS_COMPILER # ------------------- AC_DEFUN([_LT_AC_SYS_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # Allow CC to be a program name with arguments. set dummy $CC compiler="[$]2" ])# _LT_AC_SYS_COMPILER # _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR # --------------------------------- AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], [# Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) PATH_SEPARATOR=';' ;; *) PATH_SEPARATOR=':' ;; esac fi ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR # _LT_AC_PROG_ECHO_BACKSLASH # -------------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac echo=${ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(ECHO) AC_DIVERT_POP ])# _LT_AC_PROG_ECHO_BACKSLASH # _LT_AC_LOCK # ----------- AC_DEFUN([_LT_AC_LOCK], [AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, [AC_TRY_LINK([], [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); DllMain (0, 0, 0);], [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; ]) esac need_locks="$enable_libtool_lock" ])# _LT_AC_LOCK # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN(AC_LIBTOOL_COMPILER_OPTION, [AC_CACHE_CHECK([$1], [$2], [$2=no ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $3" echo "$lt_simple_compile_test_code" > conftest.$ac_ext if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD() else $2=yes fi fi $rm conftest* CFLAGS="$save_CFLAGS" ]) if test x"[$]$2" = xyes; then ifelse([$5], , :, [$5]) else ifelse([$6], , :, [$6]) fi ])# AC_LIBTOOL_COMPILER_OPTION # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ------------------------------------------------------------ # Check whether the given compiler option works AC_DEFUN(AC_LIBTOOL_LINKER_OPTION, [AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD() else $2=yes fi fi $rm conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then ifelse([$4], , :, [$4]) else ifelse([$5], , :, [$5]) fi ])# AC_LIBTOOL_LINKER_OPTION # AC_LIBTOOL_SYS_MAX_CMD_LEN # -------------------------- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [# find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 testring="ABCD" case $host_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; *) # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ = "XX$testring" && new_result=`expr "X$testring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 18 # 1 MB should be enough do i=`expr $i + 1` testring=$testring$testring done testring= # add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. 1/4 # should be good. len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len` ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi ])# AC_LIBTOOL_SYS_MAX_CMD_LEN # _LT_AC_CHECK_DLFCN # -------------------- AC_DEFUN(_LT_AC_CHECK_DLFCN, [AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ------------------------------------------------------------------ AC_DEFUN(_LT_AC_TRY_DLOPEN_SELF, [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_unknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_AC_TRY_DLOPEN_SELF # AC_LIBTOOL_DLOPEN_SELF # ------------------- AC_DEFUN(AC_LIBTOOL_DLOPEN_SELF, [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; cygwin* | mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; *) AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load", [AC_CHECK_LIB(dld, shl_load, [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"], [AC_CHECK_LIB(dl, dlopen, [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen", [AC_CHECK_LIB(svld, dlopen, [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then LDFLAGS="$LDFLAGS $link_static_flag" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi ])# AC_LIBTOOL_DLOPEN_SELF # AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) # --------------------------------- # Check to see if options -c and -o are simultaneously supported by compiler AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" echo "$lt_simple_compile_test_code" > conftest.$ac_ext # According to Tom Tromey, Ian Lance Taylor reported there are C compilers # that will create temporary files in the current directory regardless of # the output directory. Thus, making CWD read-only will cause this test # to fail, enabling locking or at least warning the user not to do parallel # builds. chmod -w . if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then # Append any errors to the config.log. cat out/conftest.err 1>&AS_MESSAGE_LOG_FD() else _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi CFLAGS="$save_CFLAGS" chmod u+w . $rm conftest* out/* rmdir out cd .. rmdir conftest $rm conftest* ]) ])# AC_LIBTOOL_PROG_CC_C_O # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) # ----------------------------------------- # Check to see if we can do hard links to lock some files if needed AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_REQUIRE([_LT_AC_LOCK])dnl hard_links="nottested" if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS # AC_LIBTOOL_OBJDIR # ----------------- AC_DEFUN([AC_LIBTOOL_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir ])# AC_LIBTOOL_OBJDIR # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) # ---------------------------------------------- # Check hardcoding attributes. AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var"; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_AC_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_AC_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_AC_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH # AC_LIBTOOL_SYS_LIB_STRIP # ------------------------ AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], [striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ])# AC_LIBTOOL_SYS_LIB_STRIP # AC_LIBTOOL_SYS_DYNAMIC_LINKER # ----------------------------- # PORTME Fill in your ld.so characteristics AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_MSG_CHECKING([dynamic linker characteristics]) library_names_spec= libname_spec='lib$name' soname_spec= postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}.so$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}.so$major' ;; aix4* | aix5*) version_type=linux if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in [ aix4 | aix4.[01] | aix4.[01].*)] if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}.so$major' fi shlibpath_var=LIBPATH deplibs_check_method=pass_all fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ;; beos*) library_names_spec='${libname}.so' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi4*) version_type=linux need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin*) library_names_spec='$libname.dll.a' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog .libs/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' ;; yes,mingw*) library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` ;; yes,pw32*) library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' ;; *) library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; *) # from 3.2 on shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. dynamic_linker="$host_os dld.sl" version_type=sunos need_lib_prefix=no need_version=no shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' soname_spec='${libname}${release}.sl$major' # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6*) version_type=irix need_lib_prefix=no need_version=no soname_spec='${libname}${release}.so.$major' library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' case $host_os in irix5*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' soname_spec='${libname}${release}.so$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH file_magic_cmd=/usr/bin/file file_magic_test_file=`echo /usr/lib/libc.so.*` if [ "`echo __ELF__ | $CC -E - | grep __ELF__`" = "" -o "$host_os-$host_cpu" = "openbsd2.8-powerpc" ]; then deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' else deplibs_check_method='file_magic OpenBSD.* shared library' fi ;; os2*) libname_spec='$name' need_lib_prefix=no library_names_spec='$libname.dll $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_version=no soname_spec='${libname}${release}.so' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' soname_spec='$libname.so.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; uts4*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER # _LT_AC_TAGCONFIG # ---------------- AC_DEFUN([_LT_AC_TAGCONFIG], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl AC_ARG_WITH(tags, [ --with-tags=TAGS include additional configurations [CXX,GCJ]], [tagnames="$withval"], [tagnames="CXX,GCJ"]) if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then AC_MSG_WARN([output file `$ofile' does not exist]) fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) else AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters [case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in] "") ;; *) AC_MSG_ERROR([invalid tag name: $tagname]) ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then AC_MSG_ERROR([tag name $tagname already exists]) fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) AC_LIBTOOL_LANG_CXX_CONFIG ;; GCJ) AC_LIBTOOL_LANG_GCJ_CONFIG ;; *) AC_MSG_ERROR([Unsupported tag name: $tagname]) ;; esac # Append the new tag name to the list of available tags. available_tags="$available_tags $tagname" fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" AC_MSG_ERROR([unable to update list of available tagged configurations.]) fi fi ])# _LT_AC_TAGCONFIG # _LT_AC_LTCONFIG_HACK([TAGNAME]) # ------------------------------- # If TAGNAME is not passed, then create an initial libtool configuration # for the default language. Otherwise make the configuration named by # TAGNAME. AC_DEFUN([_LT_AC_LTCONFIG_HACK], [ ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... ])# _LT_AC_LTCONFIG_HACK # AC_LIBTOOL_DLOPEN # ----------------- # enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_DLOPEN # AC_LIBTOOL_WIN32_DLL # -------------------- # declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL # AC_ENABLE_SHARED([DEFAULT]) # --------------------------- # implement the --enable-shared flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_SHARED], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ])# AC_ENABLE_SHARED # AC_DISABLE_SHARED # ----------------- #- set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no) ])# AC_DISABLE_SHARED # AC_ENABLE_STATIC([DEFAULT]) # --------------------------- # implement the --enable-static flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_STATIC], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ])# AC_ENABLE_STATIC # AC_DISABLE_STATIC # ----------------- # set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no) ])# AC_DISABLE_STATIC # AC_ENABLE_FAST_INSTALL([DEFAULT]) # --------------------------------- # implement the --enable-fast-install flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ])# AC_ENABLE_FAST_INSTALL # AC_DISABLE_FAST_INSTALL # ----------------------- # set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no) ])# AC_DISABLE_FAST_INSTALL # AC_LIBTOOL_PICMODE([MODE]) # -------------------------- # implement the --with-pic flag # MODE is either `yes' or `no'. If omitted, it defaults to `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default) ])# AC_LIBTOOL_PICMODE # AC_PATH_TOOL_PREFIX # ------------------- # find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${PATH_SEPARATOR-:}" dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ])# AC_PATH_TOOL_PREFIX # AC_PATH_MAGIC # ------------- # find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin${PATH_SEPARATOR-:}$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin${PATH_SEPARATOR-:}$PATH) else MAGIC_CMD=: fi fi ])# AC_PATH_MAGIC # AC_PROG_LD # ---------- # find the path to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) [re_direlt='/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$lt_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ])# AC_PROG_LD # AC_PROG_LD_GNU # -------------- AC_DEFUN([AC_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi]) with_gnu_ld=$lt_cv_prog_gnu_ld ])# AC_PROG_LD_GNU # AC_PROG_LD_RELOAD_FLAG # ---------------------- # find reload flag for linker # -- PORTME Some linkers may need a different reload flag. AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' ])# AC_PROG_LD_RELOAD_FLAG # AC_DEPLIBS_CHECK_METHOD # ----------------------- # how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_CACHE_CHECK([how to recognise dependant libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # ['file_magic [regex]'] -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix4* | aix5*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* | pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) case $host_cpu in alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;] esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'] else [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'] fi ;; newos6*) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; [sysv5uw[78]* | sysv4*uw2*)] lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in motorola) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;; sni) lt_cv_file_magic_cmd='/bin/file' [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"] lt_cv_file_magic_test_file=/lib/libc.so ;; esac ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown ])# AC_DEPLIBS_CHECK_METHOD # AC_PROG_NM # ---------- # find the path to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$lt_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" ])# AC_PROG_NM # AC_CHECK_LIBM # ------------- # check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ])# AC_CHECK_LIBM # AC_LIBLTDL_CONVENIENCE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # INCLTDL to the include flags for the libltdl header and adds # --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL # and INCLTDL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If # DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ])# AC_LIBLTDL_CONVENIENCE # AC_LIBLTDL_INSTALLABLE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # INCLTDL to the include flags for the libltdl header and adds # --enable-ltdl-install to the configure arguments. Note that LIBLTDL # and INCLTDL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If # DIRECTORY is not provided and an installed libltdl is not found, it is # assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' # and INCLTDL will be prefixed with '${top_srcdir}/' (note the single # quotes!). If your package is not flat and you're not using automake, # define top_builddir and top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ])# AC_LIBLTDL_INSTALLABLE # If this macro is not defined by Autoconf, define it here. ifdef([AC_PROVIDE_IFELSE], [], [define([AC_PROVIDE_IFELSE], [ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_LIBTOOL_CXX # -------------- # enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_LT_AC_LANG_CXX]) ])# AC_LIBTOOL_CXX # _LT_AC_LANG_CXX # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) ])# _LT_AC_LANG_CXX # AC_LIBTOOL_GCJ # -------------- # enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ], [AC_REQUIRE([_LT_AC_LANG_GCJ]) ])# AC_LIBTOOL_GCJ # _LT_AC_LANG_GCJ # --------------- AC_DEFUN([_LT_AC_LANG_GCJ], [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) ])# _LT_AC_LANG_GCJ # AC_LIBTOOL_LANG_C_CONFIG # ------------------------ # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) AC_DEFUN([_LT_AC_LANG_C_CONFIG], [lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='main(){return(0);}' _LT_AC_SYS_COMPILER # # Check for any special shared library compilation flags. # _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= if test "$GCC" = no; then case $host_os in sco3.2v5*) _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' ;; esac fi if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) if echo "$old_CC $old_CFLAGS " | [egrep -e "[ ]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]"] >/dev/null; then : else AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no fi fi # # Check to make sure the static flag actually works. # AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), [], [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_DLOPEN_SELF($1) # Report the final consequences. AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_C_CONFIG # AC_LIBTOOL_LANG_CXX_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= # Dependencies to place before and after the object being linked: _LT_AC_TAGVAR(predep_objects, $1)= _LT_AC_TAGVAR(postdep_objects, $1)= _LT_AC_TAGVAR(predeps, $1)= _LT_AC_TAGVAR(postdeps, $1)= _LT_AC_TAGVAR(compiler_lib_search_path, $1)= # Source file extension for C test sources. ac_ext=cc # Object file extension for compiled C test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${CXX-"c++"} set dummy $CC compiler="[$]2" _LT_AC_TAGVAR(compiler, $1)=$CC cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ egrep 'GNU ld' > /dev/null; then with_gnu_ld=yes _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ egrep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_AC_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aix4* | aix5*) _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=yes else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # Test if we are trying to use run time linking, or normal AIX style linking. # If -brtl is somewhere in LDFLAGS, we need to do run time linking. aix_use_runtimelinking=no for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then aix_use_runtimelinking=yes break fi done exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -Wl,-G' _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}-brtl \${wl}$exp_sym_flag:\$export_symbols" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:/usr/lib:/lib' # Warning - without using the other run time loading flags, -berok will # link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bnoerok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # -bexpall does not export symbols beginning with underscore (_) _LT_AC_TAGVAR(always_export_symbols, $1)=yes # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds it's shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; dgux*) case $cc_basename in ec++) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; ghcx) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[12]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes ;; hpux*) if test $with_gnu_ld = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' fi _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, but as the default # location of the library. case $cc_basename in CC) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC) case $host_os in hpux9*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test $GXX = yes; then if test $with_gnu_ld = no; then case "$host_os" in hpux9*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; irix5* | irix6*) case $cc_basename in CC) # SGI C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' fi fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; esac ;; linux*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; cxx) # Compaq C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) # NetBSD uses g++ - do we need to do anything? ;; osf3*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; RCC) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; sco*) case $cc_basename in CC) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; sunos4*) case $cc_basename in CC) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; lcc) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system # linker. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx) # Green Hills C++ Compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | egrep -v '^2\.7' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' fi ;; esac ;; tandem*) case $cc_basename in NCC) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; unixware*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; vxworks*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no # Figure out "hidden" C++ library dependencies from verbose # compiler output whening linking a shared library. cat > conftest.$ac_ext <> "$cfgfile" ifelse([$1], [], [#! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG], [# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$LTCC # A language-specific compiler. CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) # Is the compiler the GNU C compiler? with_gcc=$_LT_AC_TAGVAR(GCC, $1) # The linker used to build libraries. LD=$lt_[]_LT_AC_TAGVAR(LD, $1) # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) # Must we lock files when doing compilation ? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) # Commands used to build and install a shared archive. archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) # Flag that forces no undefined symbols. no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" # Set to yes if exported symbols are required. always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) # The commands to list exported symbols. export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) # Symbols that must always be exported. include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ifelse([$1],[], [# ### END LIBTOOL CONFIG], [# ### END LIBTOOL TAG CONFIG: $tagname]) __EOF__ ifelse([$1],[], [ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; cygwin* | mingw* | pw32* | os2*) cat <<'EOF' >> "$cfgfile" # This is a source program that is used to create dlls on Windows # Don't remove nor modify the starting and closing comments _LT_AC_FILE_LTDLL_C # This is a source program that is used to create import libraries # on Windows for dlls which lack them. Don't remove nor modify the # starting and closing comments _LT_AC_FILE_IMPGEN_C EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ]) else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. test -f Makefile && make "$ltmain" fi ])# AC_LIBTOOL_CONFIG # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # --------------------------------- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_PROG_NM]) AC_REQUIRE([AC_OBJEXT]) # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. [symcode='[BCDEGRST]'] # Regexp to match symbols that can be accessed directly from C. [sympat='\([_A-Za-z][_A-Za-z0-9]*\)'] # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" # Define system-specific variables. case $host_os in aix*) [symcode='[BCDT]'] ;; cygwin* | mingw* | pw32*) [symcode='[ABCDGISTW]'] ;; hpux*) # Its linker distinguishes data from code symbols lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ;; irix*) [symcode='[BCDEGRST]'] ;; solaris* | sysv5*) [symcode='[BDT]'] ;; sysv4) [symcode='[DFNSTU]'] ;; esac # Handle CRLF in mingw tool chain opt_cr= case $host_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then [symcode='[ABCDGISTW]'] fi # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe=["sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"] # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$nlist" >/dev/null; then if egrep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } [lt_preloaded_symbols[] =] { EOF sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD() fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD() fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD() fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD() cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) # --------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; newsos6) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; osf3* | osf4* | osf5*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; sco3.2v5*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' ;; solaris*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sunos4*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) if test "x$host_vendor" = xsni; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD' else _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' fi _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi case "$host_os" in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC" ;; esac ]) # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) # ------------------------------------ # See if the linker supports building shared libraries. AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) runpath_var= _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(archive_cmds, $1)= _LT_AC_TAGVAR(archive_cmds_need_lc, $1)= _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_AC_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an egrep regular expression of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac _LT_AC_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX, the GNU linker is very broken # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left by newer dlltools. _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \[$]# in 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; darwin* | rhapsody*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)' # We need to add '_' to the symbols in $export_symbols first #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; sunos4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' case $host_os in cygwin* | mingw* | pw32*) # dlltool doesn't understand --whole-archive et. al. _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=yes _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix4* | aix5*) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[-12].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=yes else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # Test if we are trying to use run time linking, or normal AIX style # linking. If -brtl is somewhere in LDFLAGS, we need to do run time # linking. aix_use_runtimelinking=no for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then aix_use_runtimelinking=yes break fi done exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # -bexpall does not export symbols beginning with underscore (_) _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other run time loading flags (-brtl), # -berok will link without error, but may produce a broken # library. _LT_AC_TAGVAR(allow_undefined_flag, $1)=' $wl}-berok' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:/usr/lib:/lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # -bexpall does not export symbols beginning with underscore (_) _LT_AC_TAGVAR(always_export_symbols, $1)=yes # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:/usr/lib:/lib' # This is similar to how AIX traditionally builds it's shared # libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # see comment about different semantics on the GNU ld section _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; bsdi4*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; dgux*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9* | hpux10* | hpux11*) if test $with_gcc = yes; then case $host_os in hpux9*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_os in hpux9*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, but as the default # location of the library. _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; irix5* | irix6*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; openbsd*) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if [ "`echo __ELF__ | $CC -E - | grep __ELF__`" = "" -o "$host_os-$host_cpu" = "openbsd2.8-powerpc" ]; then _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' fi ;; esac ;; os2*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; sco3.2v5*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ;; solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$with_gcc" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in [solaris2.[0-5] | solaris2.[0-5].*]) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) if test "x$host_vendor" = xsni; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts' _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie fi runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_AC_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4.2uw2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; sysv5uw7* | unixware7*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv5*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' ;; uts4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi # # Do we need to explicitly link libc? # _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_AC_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* echo 'static int dummy;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) _LT_AC_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) then _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ])# AC_LIBTOOL_PROG_LD_SHLIBS # _LT_AC_FILE_LTDLL_C # ------------------- AC_DEFUN([_LT_AC_FILE_LTDLL_C], [# /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ ])# _LT_AC_FILE_LTDLL_C # _LT_AC_FILE_IMPGEN_C # -------------------- AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [# /* impgen.c starts here */ # /* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc. # # This file is part of GNU libtool. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # */ # # #include /* for printf() */ # #include /* for open(), lseek(), read() */ # #include /* for O_RDONLY, O_BINARY */ # #include /* for strdup() */ # # /* O_BINARY isn't required (or even defined sometimes) under Unix */ # #ifndef O_BINARY # #define O_BINARY 0 # #endif # # static unsigned int # pe_get16 (fd, offset) # int fd; # int offset; # { # unsigned char b[2]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 2); # return b[0] + (b[1]<<8); # } # # static unsigned int # pe_get32 (fd, offset) # int fd; # int offset; # { # unsigned char b[4]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 4); # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # static unsigned int # pe_as32 (ptr) # void *ptr; # { # unsigned char *b = ptr; # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # int # main (argc, argv) # int argc; # char *argv[]; # { # int dll; # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; # unsigned long export_rva, export_size, nsections, secptr, expptr; # unsigned long name_rvas, nexp; # unsigned char *expdata, *erva; # char *filename, *dll_name; # # filename = argv[1]; # # dll = open(filename, O_RDONLY|O_BINARY); # if (dll < 1) # return 1; # # dll_name = filename; # # for (i=0; filename[i]; i++) # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') # dll_name = filename + i +1; # # pe_header_offset = pe_get32 (dll, 0x3c); # opthdr_ofs = pe_header_offset + 4 + 20; # num_entries = pe_get32 (dll, opthdr_ofs + 92); # # if (num_entries < 1) /* no exports */ # return 1; # # export_rva = pe_get32 (dll, opthdr_ofs + 96); # export_size = pe_get32 (dll, opthdr_ofs + 100); # nsections = pe_get16 (dll, pe_header_offset + 4 +2); # secptr = (pe_header_offset + 4 + 20 + # pe_get16 (dll, pe_header_offset + 4 + 16)); # # expptr = 0; # for (i = 0; i < nsections; i++) # { # char sname[8]; # unsigned long secptr1 = secptr + 40 * i; # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); # unsigned long vsize = pe_get32 (dll, secptr1 + 16); # unsigned long fptr = pe_get32 (dll, secptr1 + 20); # lseek(dll, secptr1, SEEK_SET); # read(dll, sname, 8); # if (vaddr <= export_rva && vaddr+vsize > export_rva) # { # expptr = fptr + (export_rva - vaddr); # if (export_rva + export_size > vaddr + vsize) # export_size = vsize - (export_rva - vaddr); # break; # } # } # # expdata = (unsigned char*)malloc(export_size); # lseek (dll, expptr, SEEK_SET); # read (dll, expdata, export_size); # erva = expdata - export_rva; # # nexp = pe_as32 (expdata+24); # name_rvas = pe_as32 (expdata+32); # # printf ("EXPORTS\n"); # for (i = 0; i