were convenience libs, so we did not test the creation of shared
libraries on any platform. Also none of the libs used any actual
fortran library calls, adding a call to write(*,*) in each lib
causes the tests to fail on darwin (and presumably other platforms).
These new tests would likely cause many more fortran test failures,
so if there is an error during make it is reported as SKIP.
* tests/f77demo-make.test: Don't fail hard, skip on failure.
* tests/f77demo/foof2.f: New file.
* tests/f77demo/foof3.f: New file.
* tests/f77demo/fprogram.f: Call routine in new lib.
* tests/f77demo/foof.f: Call routine in another new lib.
* tests/f77demo/Makefile.am: Make a couple of new libraries, add
$(FLIBS) to cprogram LDADD.
already exists warnings" for .lib directory. Build on automake
wisdom to support make -j builds where a suitable mkdir is
available:
* configure.ac (AM_INIT_AUTOMAKE): Require 1.9, which goes to some
trouble to find a $(mkdir_p) that doesn't interfere with make -j.
* Makefile.am (edit): Substitute for @mkdir_p@.
* config/ltmain.in (MKDIR_P): Take @mkdir_p@ value.
(mkdir): Removed.
(func_mkdir_p): New function to use $MKDIR_P. Factor out all
previous mkdir calls to use this function.
(RM, MV): Declared as in libtoolize.in. Changed all callers.
* libtoolize.in (MKDIR_P): Take @mkdir_p@ value from automake.
(func_mkdir_p): Use it, similarly to new config/ltmain.in.
* tests/defs: Synchronize boiler plate code with ltmain.in.
Adjust all callers.
Add missing copyright preamble.
* tests/demo-static.test: Add missing copyright preamble.
Reported by Daniel Reed <n@ml.org>
preamble.
* tests/defs: Put a full m4sh.m4 style 'Be Bourne compatible'
preamble in here too.
* HACKING: Note that tests/defs needs synching with m4sh.m4 too.
* TODO: Add new item.
the many and varied m4 symbols accumulated by libtool over the
years, considering also that modern autoconf can detect unexpanded
macros even without AC in the macro name:
* bootstrap: Remove libltdl/config.h from previous releases.
* m4/libtool.m4, m4/ltdl.m4, doc/libtool.texi: Basically, run a
giant sed transformation like this:
s,AC_LIB_LTDL,LTDL_INIT,g
s,AC_LIBLTDL_CONVENIENCE,LTDL_CONVENIENCE,g
s,AC_LIBLTDL_INSTALLABLE,LTDL_INSTALLABLE,g
s,AC_WITH_LTDL,LT_WITH_LTDL,g
s,AC_LTDL_ENABLE_INSTALL,_LT_ENABLE_INSTALL,g
s,AC_DEPLIBS_CHECK_METHOD,_LT_CHECK_MAGIC_METHOD,g
s,AC_LIBTOOL_OBJDIR,_LT_CHECK_OBJDIR,g
s,AC_LTDL_OBJDIR,_LT_CHECK_OBJDIR,g
s,AC_LTDL_DLPREOPEN,_LT_CHECK_DLPREOPEN,g
s,AC_LIBTOOL_SYS_MAX_CMD_LEN,LT_CMD_MAX_LEN,g
s,AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE,_LT_CMD_GLOBAL_SYMBOLS,g
s,AC_LIBTOOL_SYS_OLD_ARCHIVE,_LT_CMD_OLD_ARCHIVE,g
s,AC_PROG_LD_RELOAD_FLAG,_LT_CMD_RELOAD,g
s,AC_LIBTOOL_SYS_LIB_STRIP,_LT_CMD_STRIPLIB,g
s,AC_CHECK_LIBM,LT_LIB_M,g
s,AC_LTDL_DLLIB,LT_LIB_DLLOAD,g
s,AC_LIBTOOL_COMPILER_OPTION,_LT_COMPILER_OPTION,g
s,AC_LIBTOOL_PROG_CC_C_O,_LT_COMPILER_C_O,g
s,AC_LIBTOOL_PROG_COMPILER_NO_RTTI,_LT_COMPILER_NO_RTTI,g
s,AC_LIBTOOL_PROG_COMPILER_PIC,_LT_COMPILER_PIC,g
s,AC_LIBTOOL_SYS_HARD_LINK_LOCKS,_LT_COMPILER_FILE_LOCKS,g
s,AC_LTDL_DLSYM_USCORE,LT_FUNC_DLSYM_USCORE,g
s,AC_LIBTOOL_LINKER_OPTION,_LT_LINKER_OPTION,g
s,AC_LIBTOOL_PROG_LD_SHLIBS,_LT_LINKER_SHLIBS,g
s,AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH,_LT_LINKER_HARDCODE_LIBPATH,g
s,AC_PATH_MAGIC,_LT_PATH_MAGIC,g
s,AC_PATH_TOOL_PREFIX,_LT_PATH_TOOL_PREFIX,g
s,AC_PROG_LD,LT_PATH_LD,g
s,AC_PROG_LD_GNU,_LT_PATH_LD_GNU,g
s,AC_PROG_NM,LT_PATH_NM,g
s,AC_LTDL_SYS_DLOPEN_DEPLIBS,LT_SYS_DLOPEN_DEPLIBS,g
s,AC_LIBTOOL_DLOPEN_SELF,LT_SYS_DLOPEN_SELF,g
s,AC_LIBTOOL_POSTDEP_PREDEP,_LT_SYS_HIDDEN_LIBDEPS,g
s,AC_LTDL_SYSSEARCHPATH,LT_SYS_DLSEARCH_PATH,g
s,AC_LTDL_SHLIBEXT,LT_SYS_MODULE_EXT,g
s,AC_LTDL_SHLIBPATH,LT_SYS_MODULE_PATH,g
s,AC_LTDL_SYMBOL_USCORE,LT_SYS_SYMBOL_USCORE,g
s,AC_LIBTOOL_SYS_DYNAMIC_LINKER,_LT_SYS_DYNAMIC_LINKER,g
s,_LT_AC_TAGVAR,_LT_TAGVAR,g
s,_LT_AC_SYS_COMPILER,_LT_TAG_COMPILER,g
s,_LT_AC_PROG_ECHO_BACKSLASH,_LT_PROG_ECHO_BACKSLASH,g
s,_LT_AC_SYS_LIBPATH_AIX,_LT_SYS_MODULE_PATH_AIX,g
s,_LT_AC_SHELL_INIT,_LT_SHELL_INIT,g
s,_LT_AC_LOCK,_LT_ENABLE_LOCK,g
s,_LT_AC_CHECK_DLFCN,_LT_HEADER_DLFCN,g
s,_LT_AC_TRY_DLOPEN_SELF,_LT_TRY_DLOPEN_SELF,g
s,LT_AC_PROG_EGREP,_LT_DECL_EGREP,g
s,LT_AC_PROG_SED,_LT_DECL_SED,g
* doc/libtool.texi (Autoconf macros): Document exported macros.
* libtoolize.in: Compare ltdl.m4 serial numbers for LTDL_INIT
instead of newly obsoleted AC_LIB_LTDL.
(func_scan_files): Also set seen_ltdl for LTDL_INIT and
LT_WITH_LTDL.
* libltdl/ltdl.c (lt_dlforeachfile): LT_SYS_LIBSEARCH_PATH is not
an environment variable, it is an actual path.
Reported by Noah Mish <noah@cs.caltech.edu>
operation of libtool (neither would work alone). First, there is
a new feature that allows libraries to preopen modules. This
entails a backwards incompatible change to the libltdl API for
separating out the preloaded symbol lists by owner. Second, in
the tradition of "eating our own dogfood", libltdl now preloads
its own dlloaders. The internal API for dlloaders has also had to
change in a backwards incompatible way in support of the new
library preloading feature. If you don't use preloaded libraries,
you needn't change your project sources, though you will need to
recompile against the new libltdl. The API changes are mostly
confined to dlloaders, so you probably needn't worry about those
(unless you have written a custom loader that you want libltdl to
use):
* configure.ac (AC_CONFIG_FILES): Add libltdl/loaders/Makefile.
* libltdl/configure.ac (AC_CONFIG_FILES): Add loaders/Makefile.
* libltdl/loaders: New directory for module loaders, to simplify
Makefile rules, and to give the loaders themselves names that are
unique in the first few characters.
* libtoolize.in (func_copy_all_files): Copy recursively to pick up
the loaders directory contents.
* libltdl/loaders/Makefile.am: New file. Move module building
rules to here...
* libltdl/Makefile.am: ...from here.
(VERSION_INFO): Bumped version info to signify interface changes.
(libltdl_la_CPPFLAGS, libltdlc_la_CPPFLAGS): Set LTDLOPEN
appropriately for each library.
* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
libltdl/loader-loadlibrary.c libltdl/loader-preopen.c,
libltdl/loader-shl_load.c: Moved from here...
* libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
libltdl/loaders/loadlibrary.c libltdl/loaders/preopen.c,
libltdl/loaders/shl_load.c: ...to here.
(get_vtable): New entry function for each.
* libltdl/loaders/preopen.c (lt_dlsymlists_t): Replaced by...
(symlist_chain): ...a new structure which maps lists of preloaded
symbols from the object that loads them.
(lt_dlpreload_open): New function to automatically open all
preloaded modules belonging to a named object (ORIGINATOR).
* libltdl/lt__alloc.c (lt__zalloc): New function to return a block
of zeroed out new memory.
* libltdl/lt__alloc.h (lt__zalloc): Prototype it.
* libltdl/lt__private.h (lt__alloc_die_callback): Add missing
prototype.
(lt__error_strings): Make this opaque to callers.
* libltdl/lt_error.c (lt__error_strings): Move the implementation
to here.
* libltdl/lt_dlloader.h (lt_user_dlloader): Add extra fields to
make originator focused preloading possible. *BREAKS BACKWARDS
COMPATIBILITY*
(lt_dlloader_add): Take advantage of new fields to simplify
paramater list.
* libltdl/lt_system.h (LT_STR): New ANSI stringification macro.
(LT_CONC): Fix it to work from within macros.
* libltdl/ltdl.c (loader_init, loader_init_callback): Simplify
dlloader loading.
(get_vtable, preloaded_symbols): Point these at the preopen.c
symbols to bootstrap the loader chain.
(lt_dlinit): Load the preopen dlloader manually, and then use it
to load any other preloaded dlloaders.
(lt_dlloader_add): Simplify parameter list. Populate new
fields. Chain new loaders according to priority field.
* libltdl/ltdl.h (lt_dlsymlist): Add a new originator field.
(lt_dlpreload_callback_func): Type of a callback for automatic
lt_dlpreload_open loading.
(LTDL_SET_PRELOADED_SYMBOLS): Adjust to hook into preloaded
symbols from the "@PROGRAM@" originator.
* tests/demo/dlmain.c (main): Use mangled preloaded_symbols symbol.
* tests/pdemo/longer_file_name_dlmain.c (main): Ditto.
* ltmain.in: Don't spew spurious warnings when dlopening and
dlpreopening modules.
(func_generate_dlsyms): Factored out from multiple copies in the
rest of the code. Generate originator keyed symbol lists.
(func_extract_archives): Also factored. Extract the contents of
convenience archives for linking with dependent libraries when
--whole-archive is not available.
[darwin]: Don't try to link $old_library unless it exists, and
$lib is a bundle.
* m4/ltdl.m4 (AC_LTDL_DLLIB): Check for all possible dynamic
loading libraries/apis rather that stopping when an acceptable one
is discovered.
(LT_DLLOADERS): New variable for holding dlloaders that can be
preloaded.
* doc/libtool.texi: Document interface changes.
* NEWS: Updated.
them as libtool modules. Currently loader-preopen.c is linked
unconditionally and other appropriate loaders discovered by
AC_LTDL_DLLIB are built and linked in:
* libltdl/Makefile.am (libltdl_la_SOURCES): Add loader-preopen
module.
* m4/ltdl.m4 (AC_LTDL_DLLIB): Use AC_LIBOBJ to add appropriate
loaders to libltdl.
* libltdl/lt_system.h (LT_SCOPE): Moved to here.
* libltdl/ltdl.h (lt_dlloader, lt_user_data, lt_module)
(lt_module_open, lt_module_close, lt_find_sym, lt_dlloader_exit)
(struct lt_user_dlloader, lt_dlloader_next, lt_dlloader_find)
(lt_dlloader_name, lt_dlloader_data, lt_dlloader_add)
(lt_dlloader_remove): Moved declarations...
* libltdl/lt_loader.h: ...to here.
* libltdl/ltdl.c: Include lt_loader.h. Move loader implementation
code from here...
* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
libltdl/loader-loadlibrary.c, libltdl/loader-preopen.c,
libltdl/loader-shl_load.c: ...to here.
* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am,
tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am (AM_CPPFLAGS):
Add -I$(top_srcdir)/../.. so that libltdl include files can be
written as #include <libltdl/lt_dlloader.h> and found correctly.
with the Sun C++ compiler, pass convenience libraries through
to the linker with -Qoption between allextract/defaultextract.
The Sun C++ compiler bundles -Qoption arguments so
convenience libraries are linked with defaultextract
otherwise.
* tagdemo/Makefile.am, tagdemo/main.cpp, tagdemo/conv.h,
tagdemo/conv.cpp: Augment tagdemo test to link a convenience
library with a libtool library.
`configure.ac' to allow users to better control the list of
supported languages. Three LT_INIT options 'no-lang', 'all-lang'
and 'auto-lang' (the default) control the initial list and others
may be added with LT_LANG.
* m4/libtool.m4 (_LT_CONFIG): Renamed AC_LIBTOOL_CONFIG to _LT_CONFIG
which is more consistent with our own namespace and gets us further out
of Autoconf's.
(_LT_LIBTOOL_TAGS): Output available_tags variable based entirely
on the value of _LT_TAGS.
(_LT_COPYING): Call _LT_LIBTOOL_TAGS to output available tags,
always append tag configuration if the tag is available.
(LT_LANG): New macro to enable support for a language that accepts
tag names (eg. "CXX") or human language names (eg. "C++").
(_LT_LANG): Internal support macro for above that appends the
tag to _LT_TAGS and calls the appropriate config macro.
(LT_INIT): Ensure that LT_LANG is not called before LT_INIT.
(AC_LIBTOOL_TAGS): Removed, call LT_LANG for each language now.
(_LT_AC_TAG_CHECK): Removed, _LT_LANG handles duplicate calls.
(_LT_LANG_DEFAULT_CONFIG): Macro to set initial language support
based on options passed to LT_INIT.
(_LT_SETUP): Call _LT_LANG_DEFAULT_CONFIG.
(_LT_AC_TAG_CONFIG): Removed, handled by _LT_LANG_DEFAULT_CONFIG.
(_LT_AC_LANG_CXX, _LT_AC_LANG_F77, _LT_AC_LANG_GCJ): Removed,
automatic language support inclusion now handled by
_LT_LANG_DEFAULT_CONFIG.
(AC_LIBTOOL_CXX): Obsolete macro, update to LT_LANG(C++).
(AC_LIBTOOL_F77): Obsolete macro, update to LT_LANG(Fortran 77).
(AC_LIBTOOL_GCJ): Obsolete macro, update to LT_LANG(Java).
(AC_LIBTOOL_LANG_C_CONFIG_: Removed.
(_LT_AC_LANG_C_CONFIG): Renamed to _LT_LANG_C_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(_LT_SETUP): Replace call to AC_LIBTOOL_LANG_C_CONFIG with call to
new _LT_LANG_C_CONFIG macro.
(AC_LIBTOOL_LANG_CXX_CONFIG): Removed.
(_LT_AC_LANG_CXX_CONFIG): Renamed to _LT_LANG_CXX_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(AC_LIBTOOL_LANG_F77_CONFIG): Removed.
(_LT_AC_LANG_F77_CONFIG): Renamed to _LT_LANG_F77_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(AC_LIBTOOL_LANG_GCJ_CONFIG): Removed.
(_LT_AC_LANG_GCJ_CONFIG): Renamed to _LT_LANG_GCJ_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(AC_LIBTOOL_LANG_RC_CONFIG): Removed.
(_LT_AC_LANG_RC_CONFIG): Renamed to _LT_LANG_RC_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(LT_AC_PROG_GCJ): Renamed to LT_PROG_GCJ.
(LT_AC_PROG_RC): Renamed to LT_PROG_RC.
* m4/ltoptions.m4: Define new 'no-lang', 'auto-lang' and 'all-lang'
options which set the default for _LT_LANG_DEFAULT_CONFIG.
* m4/lt~obsolete.m4: Removed AC_LIBTOOL_CONFIG, _LT_AC_LANG_C_CONFIG,
_LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG; all of which are no
long referenced in any way.
* configure.ac: Enable all languages.
* tests/cdemo/configure.ac, tests/demo/configure,ac,
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/pdemo/configure,ac,
tests/tagdemo/configure.ac: Remove calls to AC_LIBTOOL_TAGS,
the default 'auto-lang' mode now does the right thing.
* doc/libtool.texi (The LT_INIT macro): Add documentation for
new LT_INIT options and the LT_LANG macro, replacing the old
documentation of AC_LIBTOOL_TAGS which is no more.
* NEWS: Updated.
`configure.ac' to be more like AC_INIT and accept a space
delimited list of options. Instead of calling `AC_LIBTOOL_DLOPEN;
AC_PROG_LIBTOOL', we now recommend `LT_INIT([dlopen])':
* m4/libtool.m4 (AC_PROG_LIBTOOL, _AC_PROG_LIBTOOL)
(AC_LIBTOOL_SETUP): Removed. Added AU_DEFUNs.
(LT_INIT): Replace with an Autoconf like interface which accepts a
version number as a minimum required libtool release at configure
time.
* m4/ltoptions.m4: New file inspired by automake/m4/amoptions.m4,
which additionally flags an error if the configuring libtool
macros are not new enough according to LT_INIT.
(LT_OPTION_DEFINE): New macro to declare option handlers.
(dlopen, win32-dll, shared, disable-shared, static)
(disable-static, fast-install, disable-fast-install, pic-only)
(no-pic): Newly LT_OPTION_DEFINEd option handlers that use...
(_LT_ENABLE_SHARED, _LT_ENABLE_STATIC, _LT_ENABLE_FAST_INSTALL)
(_LT_WITH_PIC, _LT_WIN32_DLL): New macros to handle
LT_LIBTOOL_INIT options...
* m4/libtool.m4 (AC_ENABLE_SHARED, AC_ENABLE_STATIC)
(AC_ENABLE_FAST_INSTALL, AC_LIBTOOL_DLOPEN, AC_LIBTOOL_WIN32_DLL):
...to replace these user interface macros, now defined as
AU_DEFUNs.
(AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_DISABLE_FAST_INSTALL):
Removed. No longer required with LT_INIT_LIBTOOL interface.
Added AU_DEFUNs.
(AM_ENABLE_SHARED, AM_DISABLE_SHARED, AM_ENABLE_STATIC)
(AM_DISABLE_STATIC): Changed AU_DEFUNs to match new interface.
(_LT_SETUP): Internal to LT_INIT, replaces AC_LIBTOOL_SETUP.
* m4/lt~obsolete.m4 (AC_LIBTOOL_SETUP, _AC_PROG_LIBTOOL)
(_LT_PROG_LTMAIN): More AC_DEFUNs that have been retracted.
* configure.ac: Use new interface.
* doc/libtool.texi: Document new interface.
* NEWS: Updated.
build directory not the source directory, where they won't exist
during 'make distcheck'.
* ltmain.in: Revert one line of previous intendation clean-up
to enable one of the sh.test checks to pass.
* m4/lt~obsolete.m4, tests/cdemo/configure.ac: Arghh. cvsapply just
went crazy and committed a bunch of stuff that shouldn't have been
in the last changeset. The patch backs it all out.
AIX has a brain-dead grep that only handles lines < 2048
characters. Default GREP incase we are not using a future
autoconf that sets it for us :-) Changed all callers to use $GREP
instead of grep, and to AC_REQUIRE LT_AC_PROG_EGREP.
Declare GREP as a libtool config var.
* ltmain.in: Use it.
* tests/sh.test (scripts): Accept `if $GREP "^foo=bar"' by
tightening the regexp.
Reported by Albert Chin-A-Young <china@thewrittenword.com>
truthfully, and the difference between bootstrap and user
dependencies.
* configure.ac (AM_INIT_AUTOMAKE): List AUTOMAKE_OPTIONS here.
* Makefile.am, doc/Makefile.am, tests/Makefile.am
(AUTOMAKE_OPTIONS): Removed from here.
tests/Makefile.am.
(DIST_MAKEFILE_LIST): Adjust to compensate for having removed the
`tests/' part in CONF_SUBDIRS.
* tests/Makefile.am (DIST_SUBDIRS): Distribute these directories.
(SUBDIRS): Set to `.', a NOP, to workaround an automake bug which
ignores DIST_SUBDIRS unless SUBDIRS is also set.
* Makefile.am (DIST_SUBDIRS): Don't try to distribute the tests
subdirectories from here, since the recursive automake dist rule
only works with direct child directories. Defer to
tests/Makefile.am in this case.
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Declare just
the tags we need using AC_LIBTOOL_TAGS, reducing the size of the
configure script by 50% in most cases.
then tweak the results by hand:
* m4/libtool.m4 (AC_PROG_LD): In common with all the other
AC_PROG_ macros, AC_SUBST the discovered LD.
(AC_PROG_NM): Similarly for NM.
(LT_AC_PROG_SED): Similarly for SED.
* configure.ac: No need to SUBST NM and LD manually any more.
(AC_PREREQ): Conservatively downgrade from 2.59 to 2.54.
* tests/cdemo/configure.ac, tests/demo/configure.ac,
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Ditto.
* m4/libtool.m4 (AM_PROG_LIBTOOL, AM_ENABLE_SHARED,
AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC,
AM_PROG_LD, AM_PROG_NM): AU_DEFUN these macros so autoupdate can
use the newer definitions.
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac:
s/AM_PROG_LIBTOOL/AC_PROG_LIBTOOL/. Marching boldly into the 21th
century :-$
checkout by generating ltmain.sh, using that to create libtool,
and then adding the tags to that, all from config.status.
* configure.ac (AC_CONFIG_FILES): Make config/ltmain.sh, and copy
it to libltdl.
* Makefile.am ($(srcdir)/config/ltmain.sh): This file is now
created by config.status. Adjust this rule.
(libtoolize): Set CONFIG_COMMANDS to empty to prevent regenerating
the libtool script as a side effect of running this rule.
* libtool.m4: Bump serial number. Fix comment typos.
(_LT_CONFIG_LIBTOOL_INIT, _LT_CONFIG_LIBTOOL,
_LT_CONFIG_SAVE_COMMANDS, _LT_CONFIG_COMMANDS: New macros. They
don't work for some reason - the variable value quoting in the
init section is all wrong. Not used at the moment.
(AC_LIBTOOL_CONFIG): Generate libtool from config.status.
(_LT_AC_TAG_CONFIG): Add the tags in config.status.
(compiler_DEFAULT): Save the compiler value for the DEFAULT tag,
or it gets overwritten by the other macros.
(EOF): Globally replace with _LT_EOF to avoid namespace pollution.
* tests/demo/configure.ac (STATIC): Check $enable_static instead
of running ./libtool which doesn't exist yet.
(BINARY_HELLDL): Check $lt_cv_sys_global_symbol_pipe with case
instead of grepping ./libtool which doesn't exist yet.
* tests/pdemo/configure.ac (STATIC, BINARY_HELLDL): Ditto.
* doc/libtool.texi (AC_PROG_LIBTOOL): Add some notes about trying
to get config details from `libtool --config'.
* NEWS: Updated.
for AC_LIBTOOL_TAGS macro to specifify libtool tags. The now
defunct --with-tags option was never documented.
* m4/libtool.m4: Restrict the list of tags that can be created
with a new AC_LIBTOOL_TAGS([tag1 tag2 ...]) macro. Deprecate
--with-tags.
already built with libtool...
(libhell0_a_LIBADD): ...instead name the objects directly. This
prevents a long standing warning from automake 1.7+.
* pdemo/Makefile.am (libhell0_a_SOURCES, libhell0_a_LIBADD):
Ditto.
tests/demo-nopic.test, tests/demo-pic.test,
tests/demo-shared.test, tests/demo-static.test,
tests/depdemo-conf.test, tests/depdemo-nofast.test,
tests/depdemo-shared.test, tests/depdemo-static.test:
Pass build system type to tests to support environment
where default system type not equal to build system type
(eg. 64-bit HP-UX).
* tests/defs: Set CONFIG_SITE to /nonexistent, except on DJGPP,
which requires its config.site, to work correctly.
* tests/cdemo-conf.test, tests/cdemo-shared.test,
tests/cdemo-static.test, tests/demo-conf.test,
tests/demo-nofast.test, tests/demo-nopic.test,
tests/demo-pic.test, tests/demo-shared.test,
tests/demo-static.test, tests/depdemo-conf.test,
tests/depdemo-nofast.test, tests/depdemo-shared.test,
tests/depdemo-static.test, tests/f77demo-conf.test,
tests/f77demo-shared.test, tests/f77demo-static.test,
tests/mdemo-conf.test, tests/mdemo-shared.test,
tests/mdemo-static.test, tests/pdemo-conf.test,
tests/tagdemo-conf.test, tests/tagdemo-shared.test,
tests/tagdemo-static.test: Don't set CONFIG_SITE, now that
tests/defs sets it.
* tests/cdemo-exec.test, tests/demo-exec.test,
tests/demo-inst.test, tests/depdemo-exec.test,
tests/depdemo-inst.test, tests/f77demo-exec.test,
tests/mdemo-exec.test, tests/mdemo-inst.test,
tests/pdemo-exec.test, tests/pdemo-inst.test,
tests/tagdemo-exec.test: When checking for the existence
of executables, use the executable file extension from $EXEEXT.
does not appear to be necessary given that Automake makes this
assignment by default. The condition is removed since Automake
1.7.1 complains about it.
specially. This causes 'test -r /dev/null/config/site' to
improperly report success, causing configure to fail. Change the
CONFIG_SITE definition from "/dev/null/config/site" to
"/nonexistent" to avoid this problem.
Fortran support tag.
(AC_LIBTOOL_PROG_CC_C_O, _LT_AC_TAGCONFIG): Support F77 tag.
(AC_LIBTOOL_F77, _LT_AC_LANG_F77, AC_LIBTOOL_LANG_F77_CONFIG):
New macros for F77 tag Fortran support.
* configure.ac: Add support for creating the new F77 tag.
* bootstrap: Add f77demo directory to the list to be processed.
* Makefile.am: Add support for FFLAGS and FLIBS.
* tests/Makefile.am: Add new Fortran tests.
* tests/f77demo-*.test: New files.
* f77demo/configure.ac, f77demo/cprogram.c, f77demo/fooc.c
* f77demo/foof.f, f77demo/foo.h, f77demo/fprogram.f
* f77demo/Makefile.am, f77demo/README: New files.
