the deplibs check is now optional
* libltdl/configure.in: read libtool --config only once,
merged AC_SYS_SYMBOL_UNDERSCORE+AC_SYS_NM_PARSE from libtool.m4
* libtool.m4: AC_SYS_SYMBOL_UNDERSCORE+AC_SYS_NM_PARSE were not
used, lt_dlopen and silent may be empty, AC_SYS_LIBTOOL_CYGWIN
no longer necessary
* ltconfig.in: NM is already checked in libtool.m4,
* ltmain.in: always link all static dependency_libs
* tests/Makefile.am: added deplibs.test
* tests/demo-exec.test, demo-inst.test: removed hell0
* tests/deplibs.test: new test to test the deplibs_check_method
archives with it, then link the program hell0 with both
* demo/hell1.c, demo/hell2.c: dummy files used to create the
libtool archives without introducing symbol conflicts
* tests/demo-exec.test, tests/demo-inst.test: run the new program
* ltconfig.in (irix5*, irix6*, deplibs_check_method): pass_all
* NEWS: improved support for BeOS and Cygwin
* TODO: ILD branch was merged, all internal variables and macros
are now documented
* demo/Makefile.am: use $(LIBS) instead of -lm
* doc/libtool.texi: documented new variable hardcode_into_libs
and thread_safe_flag_spec, renamed all AM_ENABLE/DISABLE_* macros
to AC_*, documented AC_DISABLE_FAST_INSTALL and AC_LIBTOOL_DLOPEN
* libltdl/ltdl.c: added two new error messages (cannot_open_error,
cannot_close_error), use them where approriate,
BeOS support (thanks to Xavier Pianet), on BeOS search modules
additionally in ADDON_PATH
* libtool.m4: rewrote AC_CHECK_LIBM: BeOS and Cygwin don't have
libm and *-ncr-sysv4.3* requires libmw
* ltconfig.in: don't check for LoadLibrary, hardcode dlopen
configuration for BeOS and Cygwin
* ltmain.in: fix sourcing of .la files on Solaris
(patch by Raja R Harinath)
* NEWS: inter-library dependencies are now supported
* configure.in: add the depdemo subdirectory
* depdemo/*: new demo to demonstrate inter-library dependencies
* tests/depdemo*: new tests for depdemo
* ltconfig.in: added hardcode_into_libs (whether library paths
should be hardcoded into the libraries),
it currently defaults to 'no'
* ltmain.in: new internal 'relink' mode to relink libraries
on platforms with hardcode_into_libs=yes, save command line
arguments in libtool_args, accept relative -L directories,
ignore -lm on BeOS and Cygwin, always ignore -lc,
handle -l, -L and .la arguments later, always make the library
installation directory (-rpath) absolute, in relink mode don't
delete the not-relinked library and exit immediately after relinking,
try to find already-installed libtool libraries that were specified
using -l, support hardcoding of library paths into libraries too,
export shlibpath before linking libraries, and a lot of other
big changes that I don't want to describe here... please read
the source.
* merged Gary's Win32 code from the ILD branch:
* NEWS: Win32 DLLs are now supported
* TODO: removed .a library namespace clash for win32. It is
now resolved.
* ltconfig.in (cygwin, library_names_spec): removed $libname.a.
Creating a dll with libtool no longer creates an import library.
* ltconfig.in (extract_expsyms_cmds): Create $objdir if it does
not exist -- i.e. we need to generate import an import library
in a directory which has no libs of its own.
* doc/libtool.texi (old_archive_from_expsyms_cmds,
extract_expsyms_cmds): documented these new variables.
* ltconfig.in (extract_expsyms_cmds): New variable. Commands to
extract the exported symbol list from a dll.
(old_archive_from_expsyms_cmds): New variable. Commands to build
an old archive from the extracted expsyms list.
* ltmain.in: run the cmds in extract_expsyms_cmds and
old_archive_from_expsyms_cmds as necessary.
* ltconfig.in (cygwin, old_archive_from_new_cmds): no longer
required.
* ltconfig.in (cygwin, shlibpath_overrides_runpath): I'm not even
sure whether win32 honours the runpath at all when searching for
a dll to load! Anyway, when set to yes this prevents a gratuitous
warning.
* ltmain.in (deplib): The cygwin environment doesn't actually have
-lm, and although the linker fakes having one, specifiying it to
libtool will break ILD, so we ignore it when generating
dependencies.
* doc/libtool.texi (libltdl interface): removed the line which
promised that lt_dlopen will return NULL if it can't resolve all
symbols
* libltdl/Makefile.am, libltdl/configure.in: fixed build problem:
renamed the convenience library to libltdlc.la and the
installed version to libltdl.la
* ltmain.in (wrapper script): replaced the "T" suffix of the program
file name with a "lt-" prefix
* mdemo/Makefile.am: use libltdlc.la
* tests/Makefile.am, tests/demo-nofast.test: added demo to
test --enable-fast-install=no
* demo/Makefile.am: renamed hell.debug to hell.static
(we're demonstrating static linking, not debugging)
* tests/demo*: ditto
* doc/libtool.texi (libltdl): documented new lt_dlopen(NULL)
feature
* libltdl/acconfig.h: required for config.h
* libltdl/configure.in: use config.h
* libltdl/ltdl.c: use config.h, support lt_dlopen(NULL)
(returns a handle for the program itself)
* ltconfig.in: minor reformatting
* ltmain.in: in lt_preloaded_symbols always define
the program's symbols first, for -export-dynamic list all
program symbols together, -export-symbols was broken for
programs, minor reformatting
* mdemo/Makefile.am: renamed mdemo.debug to mdemo.static
* tests/mdemo*: ditto, mdemo.test was completely broken
added function lt_dlopenext(), removed reference to
LTDL_PRELOADED_SYMBOLS in LTDL_SET_PRELOADED_SYMBOLS
* libltdl/ltdl.c: partially reverted Alexandre's dynamic string
allocation change (it was not necessary and the code was unreadable),
cleanups, removed usr_search_path_size, renamed usr_search_path
to user_search_path, in find_module() also check for moved
modules, merged find_file() and find_library(),
added lt_dlopenext(), in lt_dladdsearchdir() no longer reset
the search path if 'search_dir' == NULL and don't use realloc()
(might not be available on all platforms),
removed __P((void)) in the declaration of lt_dlgetsearchpath()
* libltdl/ltdl.h: added lt_dlopenext()
* ltconfig.in: AIX archive commands were broken,
fixed a MAJOR bug in global_symbol_pipe which caused
"demo-shared.test;demo-make.test" to fail (libtool must not extract
undefined symbols of libraries, i.e. symcode must not contain 'U')
* tests/Makefile.am (clean-local): "make distclean" in cdemo, too
* tests/mdemo-shared.test, tests/mdemo-static.test: ditto
* tests/Makefile.am: ditto
* doc/libtool.texi: document them
* demo/Makefile.am, mdemo/Makefile.am (@STATIC@): do not use
-static unconditionally, it can't work with --disable-static
* demo/configure.in, mdemo/configure.in: check whether libtool was
configured to build static libraries and, if not, set STATIC to an
empty string
libtool.m4, in last Alexandre Oliva's change to it
(sysv4*, ncr): pass all library dependencies
* ltmain.in (dependency_libs, -R): use `dep' instead of `arg' to
iterate, otherwise we'd overwrite `arg'
(convenience, old_libs): if --disable-shared, convenience
libraries are just old archives, as .lo's are of no use
* tests/cdemo-static.test: print --disable-shared here
depdemo commented out, so that `dist' works before `check'
(BUILD_LTDL): will contain libltdl if --enable-ltdl-install
* Makefile.am (DIST_SUBDIRS): expand SUBDIRS and add depdemo,
commented out
(SUBDIRS): add $(BUILT_LTDL)
* libltdl/Makefile.am (EXTRA_LTLIBRARIES): add libtest.la, the
same as libltdl but always a convenience library. Not built by
default. Both libraries now depend on the libtool script, that
depends on ../libtool and is rebuilt when needed
* mdemo/Makefile.am (mdemo, mdemo.debug): depend on and link with
../libltdl/libtest.la, that is rebuilt if needed
(mdemo_LDADD): removed $(LIBADD_M), to avoid silent failures
(foo1.la): renamed from libfoo1.la; test removing the lib prefix
* mdemo/foo1.c: renamed libfoo1_LTX symbols to foo1_LTX
* mdemo/main.c: don't include string.h nor math.h, nor refer to
sin nor cos
* tests/mdemo-exec.test: renamed libfoo1.la to foo1.la
* tests/mdemo-inst.test: ditto
* libltdl/Makefile.am (CFLAGS): ditto
* libltdl/configure.in: check for memory.h, rindex() and
dlpreopening. Fixed NEED_USCORE caching policy.
* libltdl/ltdl.h (lt_dlsym): make the name argument const
* libltdl/ltdl.c (types): new variable: head of list of available
dlopening mechanisms
(lt_dltype_t): interface of a dlopening mechanism, with pointers
to functions for init, exit, open, close and sym
(lt_dlhandle_t): added pointer to interface type
(strdup): don't name it strdup; it can be troublesome
(strrchr): ditto; use rindex if available
(LIBTOOL_STATIC): check HAVE_DLPREOPEN instead, and move to the
end of the file, so that it becomes the header of the list
(all): renamed all interface-implementation functions, to avoid
name clashes, and created lt_dltype_t nodes for all of them
(lt_dlinit): initialize all available interfaces; remove those
that fail from the list. Return failure only if no interfaces
could be initialized.
(lt_dlexit): return number of failures
(tryall_dlopen): try to open the library with all available
interfaces
(lt_dlopen): use tryall_dlopen; increased size of fixed buffers.
We should probably make these bound-checked or dynamically
allocated for the final release! Fix bug when filename did not
contain slashes; should we check for `\\' too? Try old_library if
everything else fails.
(lt_dlclose): use the interface type for closing
(lt_dlsym): make `symbol' const, use interface type for looking up
* mdemo/Makefile.am: moved mdemo/modules/* back into mdemo
(SUBDIRS): removed
(libfoo2_la_LDFLAGS): added -static; nice test. However, since it
causes -lm to linked into hell*, it causes tests that should fail
to pass
(noinst_HEADERS): no need to install foo.h
* mdemo/configure.in: remove modules/Makefile
tests/mdemo-exec.test: updated accordingly
* mdemo/Makefile.am: ../libltdl is within $(srcdir)
* libltdl, Makefile.am: added libltdl (a system independent
dlopen wrapper library extracted from mdemo)
* ltmain.in: added -module flag for compiling and linking of
modules. If enabled it compiles always both .o (with -DLT_RENAME)
and .lo files
* mdemo: modified mdemo to work with libltdl
* tests/ltdl*: added tests for libltdl
* ltconfig.in, ltmain.in: updated and fixed the patches below
1998-11-04 Thomas Tanner <tanner@gmx.de>
* mdemo/*: added new demo to demonstrate building of dlopenend
modules
* tests/Makefile.am, tests/mdemo*: added some tests for mdemo
1998-11-04 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>
* demo/configure.in: added AC_EXEEXT macro so that the tests can
work on cywin32/mingw32 hosts. This requires the current CVS
autoconf
1998-11-04 Thomas Tanner <tanner@gmx.de>
* ltmain.in: New flag -export-symbols; new dlpreopen system
* demo/dlmain.c: removed dld_preloaded_symbol_count
1998-11-04 Ian Lance Taylor <ian@cygnus.com>
* ltmain.in: On installation, don't get confused if the same name
appears more than once in the list of library names.
1998-11-04 Ian Lance Taylor <ian@cygnus.com>
* ltconfig.in: Add objext and libext variables. Check for object
suffix. Check for mingw32* as well as cygwin32*. Use objext when
testing compiler. Add support for Visual C++ on cygwin32 when not
using gcc. Add objext, libext, and fix_srcfile_path to generated
libtool script.
* ltmain.in: Use .${objext} rather than .o. Use fix_srcfile_path
if it is set. Check for .obj as well as for .o, and for .lib as
well as for .a. Use .${libext} rather than .a when creating old
libraries.
* libtoolize.in: Change initial /bin/sh to @SHELL@.
* libtool.m4 (AM_PROG_LIBTOOL): Add AC_REQUIRE for
AC_CANONICAL_BUILD, so that autoconf doesn't get mixed up by the
AC_REQUIRE in AC_CHECK_TOOL.
1998-11-04 Ian Lance Taylor <ian@cygnus.com>
* ltconfig.in: Look in the right directory for libtool.c in
archive_cmds for cygwin32.
1998-11-04 Ian Lance Taylor <ian@cygnus.com>
* ltconfig.in: Fix cygwin32 support to avoid using a double
extension, to delete the def file, to set version_type to windows,
and to include versuffix in the DLL name.
* ltmain.in: Add support for a version_type of windows.
1998-11-04 Ian Lance Taylor <ian@cygnus.com>
* ltconfig.in: Add cygwin32 support.
* libtool.m4 (AM_PROG_LIBTOOL): Call AM_SYS_LIBTOOL_CYGWIN32 on a
cygwin32 host. Pass DLLTOOL and AS to ltconfig.
(AM_SYS_LIBTOOL_CYGWIN32): New macro.
