use in non-recursive libltdl installations.
* bootstrap: Adjust.
* Makefile.am: include it.
(libltdl/Makefile.am): Adjust to build from the new
libltdl/Makefile.inc.
(SUBDIR_LIBOBJS): Renamed from this...
(LTDL_SUBDIR_LIBOBJS): ...to this.
* configure.ac: Adjust.
* doc/libtool.texi (Invoking libtoolize): Document the new modes
and libtoolize option to select them.
* libtoolize.m4sh: Parse new options, --nonrecursive, --recursive
and --subproject. Install the appropriate files with --ltdl
according to the selected mode.
(func_scan_files): If --subproject, --recursive or --nonrecursive
options were not given, use the value from LT_CONFIG_LTDL_DIR; if
a mode was given, and there is also an argument to
LT_CONFIG_LTDL_DIR, ensure they are the same.
* NEWS: Updated.
* bootstrap (SHELL): Set to $CONFIG_SHELL or /bin/sh.
Name `make' targets in portable fashion. Work around `rm'
warnings. Unconditionally create fake `libtoolize'.
Reported by Patrick Welche <prlw1@newn.cam.ac.uk>.
which lack AC_CONFIG_LIBOBJ_DIR support.
* bootstrap: Unless environment variable WORKING_LIBOBJS_SUPPORT
is set to true aka `:', symlink ..
* argz.c lt__dirent.c lt__strl.c: .. these from the copies in
libltdl.
* configure.ac (SUBDIR_LIBOBJS): Automake conditional, set if
bootstrap didn't make the extra copies of libobj sources in
top srcdir...
* Makefile.am: Add these to EXTRA_DIST if SUBDIR_OBJS is not set,
as well as the originals in libltdl/, in order to work when
bootstrapped both with old and newer Automake/Autoconf.
installation to the libtoolize master tree, so that libltdl is
useable even in the extreme case of when automake and autoconf are
not installed on the developers machine. Part of this change
requires some duplication of rules between Makefile.am (which
builds libltdl for this distribution) and libltdl/Makefile.am
(which is used by projects that libltoolize --ltdl --copy), so
libtool now really does use a single toplevel Makefile.am, and we
generate libltdl/Makefile.am from that:
* m4, config: Moved from here...
* libltdl/m4, libltdl/config: ...to here, to reduce the amount of
kludging needed in bootstrap for autoreconf to run.
* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
tests/fcdemo/Makefile.am, tests/mdemo/Makefile.am,
tests/mdemo2/Makefile.am, tests/pdemo/Makefile.am,
tests/tagdemo/Makefile.am (ACLOCAL_AMFLAGS): Adjust to
compensate.
* tests/cdemo/configure.ac, tests/demo/configure.ac,
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/fcdemo/configure.ac, tests/mdemo/configure.ac,
tests/mdemo2/configure.ac, tests/pdemo/configure.ac,
tests/tagdemo/configure.ac (AC_CONFIG_AUX_DIR): Ditto.
* libltdl/m4/ltdl.m4: Increment serial number.
(LTDL_INIT): Accept an optional directory argument to prefix each
of the LD_DLLOADERS locations. Default to empty for backwards
compatibility.
* Makefile.maint: Adjust to compensate.
* configure.ac (AC_CONFIG_AUX_DIR, AC_CONFIG_MACRO_DIR): Adjust.
(AC_CONFIG_LIBOBJ_DIR): Set here so that we can build LTLIBOBJS
from in a subdirectory from the amalgamated Makefile.am.
(AM_PROG_CC_C_O, AM_INIT_AUTOMAKE): Use subdir-objects.
(AC_CONFIG_FILES): Remove libltdl/Makefile.am.
* libltdl/Makefile.am: Removed from repository, and merged into
Makefile.am as we now generate it...
* Makefile.am (libltdl/Makefile.am): ...from here, by extracting
the merged rules, and tweaking paths to accomodate the difference
in directory from Makefile.am to libltdl/Makefile.am.
(nobase_dist_pkgdata_DATA): Automake generated installation rules
change timestamps of installed files, so renamed this...
(configauxfiles): ...to this...
(libtoolize): ...substitute it...
(install-data-local): ...install manually, preserving
timestamps...
(install-data-hook): ...and set execute bit as appropriate.
(uninstall-hook): Not forgetting to remove them at uninstall.
(libltdl/Makefile.in): New rule. Called from...
* bootstrap: ...here to avoid relying on config.status at
bootstrap time.
(auxdir, m4dir): Extract from configure.ac for ease of future
maintenance. Adjust all references.
(reconfdirs): Call autoreconf for libltdl too -- even
though we don't use it for the build, libltdl/configure and
friends are installed with `libtoolize --ltdl --copy'.
* libtoolize.m4sh: Add files from the installed config master tree
to libtoolize --ltdl project subdirectory.
Diagnose duplicated files when --ltdl is used in an autotooled
project.
It's perfectly fine to run `libtoolize --ltdl --copy' in a tree
that has no configure.ac or configure.in; we want libltdl to be
useful even to projects that don't use autotools themselves.
(libtoolize_flags): Removed. Changed all callers.
(func_massage_pkgconfig_files): New function.
* tests/standalone.at: New tests for using libltdl without
supporting configury in the parent project.
* tests/testsuite.at: Run them!
* NEWS: Updated.
files generated in doc and tests already lived in
$top_srcdir/Makefile.am, along with proxy rules in sub-Makefiles,
this changeset consolidates almost everything into the top
Makefile.am, simplifying things considerably:
* doc/Makefile.am, tests/Makefile.am: Removed. All rules moved...
* Makefile.am: ...to here and adjusted to run from $top_builddir.
Some reformatting to group rules and declarations by purpose, and
simplify with respect to removing much of the make recursion.
Add `doc/PLATFORMS', `doc/fdl.texi' and `doc/notes.texi'.
`defs.in' and `defs.m4sh' are in directory `tests'.
(uninstall-hook): Don't forget to uninstall libtoolize's libltdl
source tree.
* bootstrap: Simplified dirty makefile management, and bootstrap
file creation in light of having only a single pertinent
Makefile.
* configure.ac (CONF_SUBDIRS): Add tests/ prefix to each subdir to
compensate.
(DIST_MAKEFILE_LIST): Adjust.
(AC_CONFIG_FILES): Remove doc/Makefile and tests/Makefile.
* tests/defs.m4sh (LIBTOOL, scripts): Adjust paths.
* tests/cdemo-conf.test, tests/cdemo-exec.test,
tests/cdemo-make.test, tests/cdemo-shared.test,
tests/cdemo-static.test, tests/cdemo-undef.test,
tests/demo-conf.test, tests/demo-deplibs.test,
tests/demo-exec.test, tests/demo-hardcode.test,
tests/demo-inst.test, tests/demo-make.test,
tests/demo-nofast.test, tests/demo-noinst-link.test,
tests/demo-nopic.test, tests/demo-pic.test,
tests/demo-relink.test, tests/demo-shared.test,
tests/demo-static.test, tests/demo-unst.test,
tests/depdemo-conf.test, tests/depdemo-exec.test,
tests/depdemo-inst.test, tests/depdemo-make.test,
tests/depdemo-nofast.test, tests/depdemo-relink.test,
tests/depdemo-shared.test, tests/depdemo-static.test,
tests/depdemo-unst.test, tests/f77demo-conf.test,
tests/f77demo-exec.test, tests/f77demo-make.test,
tests/f77demo-shared.test, tests/f77demo-static.test,
tests/link-2.test, tests/link.test, tests/mdemo-conf.test,
tests/mdemo-dryrun.test, tests/mdemo-exec.test,
tests/mdemo-inst.test, tests/mdemo-make.test,
tests/mdemo-shared.test, tests/mdemo-static.test,
tests/mdemo-unst.test, tests/mdemo2-conf.test,
tests/mdemo2-exec.test, tests/mdemo2-make.test, tests/nomode.test,
tests/objectlist.test, tests/pdemo-conf.test,
tests/pdemo-exec.test, tests/pdemo-inst.test,
tests/pdemo-make.test, tests/quote.test, tests/sh.test,
tests/suffix.test, tests/tagdemo-conf.test,
tests/tagdemo-exec.test, tests/tagdemo-make.test,
tests/tagdemo-shared.test, tests/tagdemo-static.test,
tests/tagdemo-undef.test, tests/tagtrace.test (func_cd,
func_require): Adjust paths..
* tests/Makefile.am: ...to here.
* bootstrap: Adjust. Also, create temporary Makefile from
tests/Makefile.am so that bootstrap can create the Autotest
testsuite.
subdir-objects builds. This marks the beginning of a move to an
Autotest driven test framework, which will eventually allow us to
trim away many of the generated files in the current test demo
subdirectories:
* configure.ac (AC_CONFIG_TESTDIR): Re-enable commented out
Autotest macros.
(AUTOTEST, M4SH): Use --language long hand.
* bootstrap: Generate tests/testsuite, and by implication
tests/package.m4.
* Makefile.am (edit): Add substitutions needed to generate
tests/package.m4 from bootstrap.
(check-recursive): Add tests/testsuite.
(TESTSUITE): The new Autotest testsuite target.
(TESTSUITE_AT): The Autotest sources.
(EXTRA_DIST): Distribute the generated testsuite and sources.
(tests/package.m4): Use $(edit) to propagate package metadata to
the new tests.
(tests/testsuite): Build the testsuite.
(tests/atconfig): How to regenerate the file.
(check-local): Hook Autotest into `make check'.
(installcheck-local): Run the testsuite on the installed tree.
(clean-local): Tidy our file droppings.
* tests/Makefile.am: Remove bitrotted code from Autotest
experiments in Autoconf 2.52 era. Updated the rest and moved into
Makefile.am.
* tests/testsuite.at: New container for Autotest test groups.
* tests/am-subdir.at: New test group for compatibility with
Automake's subdir-objects builds. Currently holds two tests, one
for a C project and another similar project in C++.
* TODO: Add an entry to remind us that these new tests expose a
bug in libtool.
* NEWS: Updated.
gary@gnu.org--2004/cvs-utils--tla--1.0:
* commit, config/mailnotify: Removed. Now built from...
* clcommit.m4sh, config/mailnotify.m4sh: ...these new sources.
* Makefile.maint (commit, config/mailnotify): How to build them.
* bootstrap: If we have a checked out tree (i.e. clcommit.m4sh
is present), then build them.
with $lt_ECHO, or we always get a libtool with ECHO=echo, rather
than testing for a mechanism that quotes properly.
* NEWS: Updated.
* config/ltmain.m4sh: Need to include getopt.m4sh earlier so that
progpath is set before it is called to --no-reexec.
* NEWS: Updated.
Without this change, the distributed libtool tarball has a
dependency on autom4te. There was some inconsistency in the
filenames: now we have foo.m4sh -> m4sh -> foo.in -> configure
-> foo[.sh]. Bootstrap runs the m4sh steps and the resulting .in
files are distributed:
* tests/Makefile.am (EXTRA_DIST): Distribute defs.m4sh.
* Makefile.am (EXTRA_DIST): Distribute libtoolize.m4sh.
(libtoolize.in, libtoolize): Split into bootstrap and runtime
stages.
($(top_srcdir)/tests/defs.in, $(top_srcdir)/tests/defs): Ditto.
($(top_srcdir)/config/ltmain.sh): Swap ltmain.m4sh and ltmain.in
names.
* bootstrap: Make libtoolize.in and tests/defs.in.
* NEWS: Updated.
* config/general.m4sh, config/getopt.m4sh: New files with factored
out functionality from...
* config/ltmain.in, libtoolize.in: ...here. m4_include the shared
code, and call AS_SHELL_SANITIZE. Also quote all `[' and `]' to
survive m4 run.
(func_serial): No need to double up m4sh quotes after a `#'.
(func_check_macros): Escape `dnl' to stop m4sh interpreting it as
a macro.
* tests/defs.in: New file expanded into tests/defs by autom4te.
* m4/libtool.m4 (_LT_DECL_EGREP): Also require fgrep for the tests
that use it.
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Now built with
M4SH.
(libtoolize): Ditto.
* bootstrap: Set M4SH for call to make.
* HACKING: No need to sync to AS_SHELL_SANITIZE by hand any more.
the many and varied m4 symbols accumulated by libtool over the
years, considering also that modern autoconf can detect unexpanded
macros even without AC in the macro name:
* bootstrap: Remove libltdl/config.h from previous releases.
* m4/libtool.m4, m4/ltdl.m4, doc/libtool.texi: Basically, run a
giant sed transformation like this:
s,AC_LIB_LTDL,LTDL_INIT,g
s,AC_LIBLTDL_CONVENIENCE,LTDL_CONVENIENCE,g
s,AC_LIBLTDL_INSTALLABLE,LTDL_INSTALLABLE,g
s,AC_WITH_LTDL,LT_WITH_LTDL,g
s,AC_LTDL_ENABLE_INSTALL,_LT_ENABLE_INSTALL,g
s,AC_DEPLIBS_CHECK_METHOD,_LT_CHECK_MAGIC_METHOD,g
s,AC_LIBTOOL_OBJDIR,_LT_CHECK_OBJDIR,g
s,AC_LTDL_OBJDIR,_LT_CHECK_OBJDIR,g
s,AC_LTDL_DLPREOPEN,_LT_CHECK_DLPREOPEN,g
s,AC_LIBTOOL_SYS_MAX_CMD_LEN,LT_CMD_MAX_LEN,g
s,AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE,_LT_CMD_GLOBAL_SYMBOLS,g
s,AC_LIBTOOL_SYS_OLD_ARCHIVE,_LT_CMD_OLD_ARCHIVE,g
s,AC_PROG_LD_RELOAD_FLAG,_LT_CMD_RELOAD,g
s,AC_LIBTOOL_SYS_LIB_STRIP,_LT_CMD_STRIPLIB,g
s,AC_CHECK_LIBM,LT_LIB_M,g
s,AC_LTDL_DLLIB,LT_LIB_DLLOAD,g
s,AC_LIBTOOL_COMPILER_OPTION,_LT_COMPILER_OPTION,g
s,AC_LIBTOOL_PROG_CC_C_O,_LT_COMPILER_C_O,g
s,AC_LIBTOOL_PROG_COMPILER_NO_RTTI,_LT_COMPILER_NO_RTTI,g
s,AC_LIBTOOL_PROG_COMPILER_PIC,_LT_COMPILER_PIC,g
s,AC_LIBTOOL_SYS_HARD_LINK_LOCKS,_LT_COMPILER_FILE_LOCKS,g
s,AC_LTDL_DLSYM_USCORE,LT_FUNC_DLSYM_USCORE,g
s,AC_LIBTOOL_LINKER_OPTION,_LT_LINKER_OPTION,g
s,AC_LIBTOOL_PROG_LD_SHLIBS,_LT_LINKER_SHLIBS,g
s,AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH,_LT_LINKER_HARDCODE_LIBPATH,g
s,AC_PATH_MAGIC,_LT_PATH_MAGIC,g
s,AC_PATH_TOOL_PREFIX,_LT_PATH_TOOL_PREFIX,g
s,AC_PROG_LD,LT_PATH_LD,g
s,AC_PROG_LD_GNU,_LT_PATH_LD_GNU,g
s,AC_PROG_NM,LT_PATH_NM,g
s,AC_LTDL_SYS_DLOPEN_DEPLIBS,LT_SYS_DLOPEN_DEPLIBS,g
s,AC_LIBTOOL_DLOPEN_SELF,LT_SYS_DLOPEN_SELF,g
s,AC_LIBTOOL_POSTDEP_PREDEP,_LT_SYS_HIDDEN_LIBDEPS,g
s,AC_LTDL_SYSSEARCHPATH,LT_SYS_DLSEARCH_PATH,g
s,AC_LTDL_SHLIBEXT,LT_SYS_MODULE_EXT,g
s,AC_LTDL_SHLIBPATH,LT_SYS_MODULE_PATH,g
s,AC_LTDL_SYMBOL_USCORE,LT_SYS_SYMBOL_USCORE,g
s,AC_LIBTOOL_SYS_DYNAMIC_LINKER,_LT_SYS_DYNAMIC_LINKER,g
s,_LT_AC_TAGVAR,_LT_TAGVAR,g
s,_LT_AC_SYS_COMPILER,_LT_TAG_COMPILER,g
s,_LT_AC_PROG_ECHO_BACKSLASH,_LT_PROG_ECHO_BACKSLASH,g
s,_LT_AC_SYS_LIBPATH_AIX,_LT_SYS_MODULE_PATH_AIX,g
s,_LT_AC_SHELL_INIT,_LT_SHELL_INIT,g
s,_LT_AC_LOCK,_LT_ENABLE_LOCK,g
s,_LT_AC_CHECK_DLFCN,_LT_HEADER_DLFCN,g
s,_LT_AC_TRY_DLOPEN_SELF,_LT_TRY_DLOPEN_SELF,g
s,LT_AC_PROG_EGREP,_LT_DECL_EGREP,g
s,LT_AC_PROG_SED,_LT_DECL_SED,g
* doc/libtool.texi (Autoconf macros): Document exported macros.
* libtoolize.in: Compare ltdl.m4 serial numbers for LTDL_INIT
instead of newly obsoleted AC_LIB_LTDL.
(func_scan_files): Also set seen_ltdl for LTDL_INIT and
LT_WITH_LTDL.
* libltdl/ltdl.c (lt_dlforeachfile): LT_SYS_LIBSEARCH_PATH is not
an environment variable, it is an actual path.
Reported by Noah Mish <noah@cs.caltech.edu>
required to write this changeset -- especially that ltmain.sh is
the same on any machine for a given release, which I hadn't
noticed for some bizarre reason: It turns out that generating
distributed files from configure causes no end of hassle, as
evidenced by the many patches I've generated over the last few
days to try and get the dist and distcheck make rules to work.
Instead of all that hair, we now simply generate our distributed
files (now including ltmain.sh) with make rules -- and since
automake creates make variables for all AC_SUBSTs, that is really
easy. The code looks a lot more like automake and autoconf
Makefile.ams now, and doesn't have all the rough edges the earlier
hacky solution suffered from. We still generate libtool from
config.status, but that is not a distributed file, and doesn't
break the golden rule. Besides, there is way more going on there
than a bunch of substitutions:
* Makefile.am (edit): New common sed substitutions for files now
generated by make instead of config.status.
(CLEANFILES): Clean new tmp files.
(EXTRA_DIST): Add ltmain.sh.
(vcl-tmp): Reinstated.
(m4/ltversion.m4, config/ltmain.sh): New rules. Generate from
here instead of config.status.
(libtoolize): Ditto.
(libtool): Call config.status to regenerate if necessary.
(dist-hook): Removed.
* config/ltmain.in: Moved here from top_srcdir.
* README-alpha: Update instructions to check AS_SHELL_SANITIZE is
up to date.
* bootstrap: Rewritten. Generate m4/ltversion.m4 and
config/ltmain.sh because configure depends on them.
* configure.ac (AC_CONFIG_SRCDIR): Use libtoolize.in now that
ltmain.in has moved.
(AC_CONFIG_FILES): Don't generate distributed files,
config/ltmain.sh and libtoolize from config.status. We have make
rules to do that now.
the generated m4/ltversion.m4. Except for CVS revisions:
* ltmain.in (package_revision): Don't try to deduce it from
TIMESTAMP, since that is empty for release versions; simply
substitute it...
* configure.ac (package_revision): ...from here, having
precalculated it before resetting TIMESTAMP for release versions.
* bootstrap: Force regeneration of m4/ltversion.m4, but retain
timestamps if there is no change to the content.
* m4/lt~obsolete.m4, tests/cdemo/configure.ac: Arghh. cvsapply just
went crazy and committed a bunch of stuff that shouldn't have been
in the last changeset. The patch backs it all out.
are being used.
* Makefile.am (m4/ltversion.m4): New rule to create it from
m4/ltversion.in.
(nodist_pkgmacro_DATA): Add m4/ltversion.m4.
(EXTRA_DIST): Add m4/ltversion.in.
* m4/libtool.m4 (AC_LIBTOOL_SETUP): AC_REQUIRE LTVERSION_VERSION
from ltversion.m4.
* bootstrap: Call the Makefile.am to create an initial
m4/ltversion.m4.
* ltmain.in: Diagnose version mismatches of various flavours.
* TODO: Remove mismatch item.
* NEWS: Updated.
truthfully, and the difference between bootstrap and user
dependencies.
* configure.ac (AM_INIT_AUTOMAKE): List AUTOMAKE_OPTIONS here.
* Makefile.am, doc/Makefile.am, tests/Makefile.am
(AUTOMAKE_OPTIONS): Removed from here.
comment incase they get left around.
(LIBTOOLIZE): Use a dummy script to prevent the installed
`libtoolize' from trashing the distributed libtool.m4,
config.guess and config.sub.
tests/defs, and move the various demo directories out of
$top_srcdir, and into tests too. The refactoring showed up a
number of inconsistencies and latent bugs, as well as fixing (I
think!!) the long-standing annoyance with some of the tests giving
spurious failures intermittently. While I was here, emacs kindly
removed a lot of bogus whitespace and added copyright notices for
us:
* cdemo, demo, depdemo, f77demo, mdemo, mdemo2, pdemo, tagdemo:
Moved from here...
* tests/cdemo, tests/demo, tests/depdemo, tests/f77demo,
tests/mdemo, tests/mdemo2, tests/pdemo, tests/tagdemo: ...to
here.
* tests/defs: Factor much common functionality from the test
scripts into shell functions. Added a copyright notice.
* tests/assign.test, tests/cdemo-conf.test, tests/cdemo-exec.test,
tests/cdemo-make.test, tests/cdemo-shared.test,
tests/cdemo-static.test, tests/demo-conf.test,
tests/demo-deplibs.test, tests/demo-exec.test,
tests/demo-inst.test, tests/demo-make.test,
tests/demo-nofast.test, tests/demo-nopic.test,
tests/demo-pic.test, tests/demo-shared.test,
tests/demo-static.test, tests/demo-unst.test,
tests/depdemo-conf.test, tests/depdemo-exec.test,
tests/depdemo-inst.test, tests/depdemo-make.test,
tests/depdemo-nofast.test, tests/depdemo-shared.test,
tests/depdemo-static.test, tests/depdemo-unst.test,
tests/f77demo-conf.test, tests/f77demo-exec.test,
tests/f77demo-make.test, tests/f77demo-shared.test,
tests/f77demo-static.test, tests/link-2.test, tests/link.test,
tests/mdemo-conf.test, tests/mdemo-exec.test,
tests/mdemo-inst.test, tests/mdemo-make.test,
tests/mdemo-shared.test, tests/mdemo-static.test,
tests/mdemo-unst.test, tests/mdemo2-conf.test,
tests/mdemo2-exec.test, tests/mdemo2-make.test, tests/nomode.test,
tests/pdemo-conf.test, tests/pdemo-exec.test,
tests/pdemo-inst.test, tests/pdemo-make.test,
tests/pdemo-unst.test, tests/quote.test, tests/sh.test,
tests/suffix.test, tests/tagdemo-conf.test,
tests/tagdemo-exec.test, tests/tagdemo-make.test,
tests/tagdemo-shared.test, tests/tagdemo-static.test: Refactored
to use new functions in tests/defs. Added a copyright notice.
* tests/hardcode.test, noinst-link.test,
tests/relink.test, tests/relink.test,
tests/mdryrun.test: Ditto. Moved from here...
* tests/demo-hardcode.test, demo-noinst-link.test,
tests/demo-relink.test, tests/depdemo-relink.test,
tests/mdemo-dryrun.test: ...to here respectively.
* Makefile.am: Added a copyright notice.
* tests/sh.test: Check libtoolize.in for non-portabilities too.
* libtoolize.in: Fix non-portabilities found by tests/sh.test.
