* Makefile.am (COMMON_TESTS, TESTS): Split into ...
(NONINTERACTIVE_TESTS, INTERACTIVE_TESTS): ... these new
variables.
(check-interactive-new): Rename from check-interactive.
(check-noninteractive-new): Rename from check-noninteractive.
(check-interactive-old, check-noninteractive-old): New targets.
(check-interactive, check-noninteractive): Depend on the
respective targets for the old and the new test suites.
* doc/libtool.texi (Test descriptions): Simplify description
about check-interactive and check-noninteractive. Add index
entries.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure.ac: New configure test to find out whether `make'
supports order-only prerequisites; set @ORDER@ accordingly.
(AM_INIT_AUTOMAKE): Enable parallel-tests option.
* tests/defs.m4sh (prefix): Derive install prefix for tests
from the test name, to avoid clashes.
* Makefile.am (CXX_TESTS, F77_TESTS, FC_TESTS, COMMON_TESTS):
Reformat. Adjust for renamed tests. Add dependencies between
the respective log files of the tests, to ensure proper ordering.
Use order-only dependencies if possible, between test groups that
use the same directory.
(clean-local-legacy): Remove `_inst-*' directories as well.
Prompted by suggestion from Bob Friesenhahn.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* tests/defs.m4sh [aix]: Remove file mode permission for others,
so shared libraries are not kept in memory after execution.
Fixes failures of repeated mdemo-inst.test with on AIX 5.3.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* tests/versioning.at (versioning): The AIX linker always
records the unversioned library name, even with runtimelinking,
so skip the execution test for the incompatibly upgraded
library.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* doc/libtool.texi: Move the table of contents to the beginning.
Prompted by patch from Bruno Haible against Automake.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (tests/demo-conf.test): Remove dependency on
libtool, this test is a primary source and not generated.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/m4/libtool.m4 (_LT_CMD_OLD_ARCHIVE): Move detection
of a suitable archiver...
(_LT_PROG_AR): ...to here. New macro, also detect if the
archiver supports a listing file with the new variable
archiver_list_spec.
* libltdl/config/ltmain.m4sh: If the archiver supports a listing
file, use it when max_cmd_len is exceeded. This is needed for
tool chains such as MSVC which do not support piece by piece
linking (-r -o).
* doc/libtool.texi (libtool script contents): Update with
archiver_list_spec description.
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
* tests/getopt-m4sh.at (AT_CHECK): Autotest 2.62 chokes on unquoted
'#' in AT_CHECK, so replace all uses with '@%:@' quadrigraph.
Suggested by Eric Blake <eblake@redhat.com>
Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/config/ltmain.m4sh (func_mode_link): Revert back
func_append instances that as assignments relied on the shell
not performing word splitting on the right hand side of the
assignment.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/config/ltmain.m4sh (func_mode_link): Fix regression in
computation of finalize_rpath introduced in v2.2.10-40-g0da7d80,
fixing several testsuite failures on AIX.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/m4/libtool.m4 (_LT_PROG_ECHO_BACKSLASH): Try print
in subshell, so eventual `print: not found' is hidden reliably.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* tests/lt_dlopenext.at (lt_dlopenext error messages): Do not
use $LIBTOOL when compiling plain object, AIX by default does
not enable static archives.
* tests/ltdl-libdir.at (libdir of installed modules): Likewise.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* tests/deplibs-mingw.at (deplibs without file command): Use
LT_AT_CONFIGURE for consistency, update comment about why it
might fail.
* tests/pic_flag.at (override pic_flag at configure time): Skip
test if we are building in-tree.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/config/ltmain.m4sh (func_check_version_match): Only
preserve '--debug' switch if $opt_debug is not equal to ':'.
* tests/help.at (debug tracing): New test group.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/m4/libtool.m4 (_LT_SYS_MODULE_PATH_AIX): Wrap link
test in AC_CACHE_VAL, using cache variable $lt_cv_aix_libpath.
* tests/no-executables.at (AC_NO_EXECUTABLES): Preset it, to
avoid link test.
Bug report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/config/ltmain.m4sh <command-line handling>: Only shift
if there is a positional parameter to shift. Fixes `libtool
--help' when dash is used.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* tests/getopt-m4sh.at (_LT_AT_GETOPT_M4SH_SETUP): Insert space
between double-quoted and unquoted shell parameter, as bash
4.0.28 doesn't add one in its output if the expansion of the
second one starts with a space.
(short option splitting, enhanced shell short option splitting)
(long option splitting, XSI long option splitting): Add space in
expected output.
Fixes testsuite failures on AIX, FreeBSD, etc.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* libltdl/config/ltmain.m4sh (func_append_quoted): Document
that this function inserts a separator space.
(func_mode_compile): Do not pass extra space here.
Fixes regression introduced in v2.2.10-49-gc13532a.
Report by Rainer Tammer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* tests/pic_flag.at (override pic_flag at configure time): Skip
test if the compiler produces a warning containing `fpic'.
Do not use nonportable `grep -e', for Solaris.
Report by Charles Wilson.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Fixes testsuite failure for lt_dladvise.at on MSYS/MSVC.
* libltdl/ltdl.c (libprefix): New static variable describing
the prefix of static archives.
(try_dlopen): Use libprefix.
* libltdl/m4/ltdl.m4 (_LTDL_SETUP): Export prefix of static
archives to config.h. Also fix assignment of LTDLOPEN to be more
efficient and less error prone while at it.
* libltdl/m4/libtool.m4 (_LT_PROG_FUNCTION_REPLACE): Remove
spurious trailing space.
* ChangeLog: Reorder to match commit order after botched
merge.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Rename to
_LT_PROG_REPLACE_SHELLFNS.
(_LT_PROG_XSI_REPLACE): Rename to _LT_PROG_FUNCTION_REPLACE.
(_LT_PROG_FUNCTION_REPLACE): Change decorator comment to use
'Extended shell' rather than 'XSI' on successful replacement.
* libltdl/config/general.m4sh (func_dirname, func_basename)
(func_dirname_and_basename, func_stripname): Change decorator
comment to use 'extended shell' rather than 'XSI' on fallback
implementations.
* libltdl/config/getopt.m4sh (func_split_short_opt)
(func_split_long_opt): Ditto.
* libltdl/config/ltmain.m4sh (func_append, func_append_quoted)
(func_arith, func_len, func_lo2o, func_xform): Ditto.
* tests/getopt-m4sh.at (_LT_AT_XSI_FUNC_EXTRACT): Rename to
_LT_AT_EXTENDED_SHELL_FUNC_EXTRACT.
(_LT_AT_EXTENDED_SHELL_FUNC_EXTRACT): Change regular expression to
match new replacable function decorator comments.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/m4/libtool.m4 (_LT_CHECK_SHAREDLIB_FROM_LINKLIB): Make
sure hyphens in function name comment header underline line up.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/config/general.m4sh (func_tr_sh): New function.
* libltdl/config/ltmain.m4sh (func_generate_dlsyms) [cygwin|mingw]:
Obtain DLL name corresponding to import library by using value
stored in unique variable libfile_$(transliterated implib name).
If that fails, use $sharedlib_from_linklib_cmd to extract DLL
name from import library directly. Also, properly extract dlsyms
from the import library.
(func_mode_link) [cygwin|mingw]: Prefer to dlpreopen DLLs
over static libs when both are available. When dlpreopening
DLLs, use linklib (that is, import lib) as dlpreopen file,
rather than DLL. Store name of associated la file in
unique variable libfile_$(transliterated implib name)
for later use.
(func_win32_libid): Accomodate pei-i386 import libs
as well as pe-i386.
(func_cygming_dll_for_implib): New function.
(func_cygming_dll_for_implib_fallback): New function.
(func_cygming_dll_for_implib_fallback_core): New function.
(func_cygming_gnu_implib_p): New function.
(func_cygming_ms_implib_p): New function.
* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Adjust sed
expressions for lt_cv_sys_global_symbol_to_c_name_address and
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
as trailing space after module name is optional.
(_LT_LINKER_SHLIBS) [cygwin|mingw][C++]:
Set exclude_expsyms correctly for $host. Simplify regular
expression in export_symbols_cmds.
(_LT_LINKER_SHLIBS) [cygwin|mingw|pw32][C]: Set exclude_expsyms
correctly for $host. Enable export_symbols_cmds to identify
DATA exports by _nm_ prefix.
(_LT_CHECK_SHAREDLIB_FROM_LINKLIB): New macro sets
sharedlib_from_linklib_cmd variable.
(_LT_DECL_DLLTOOL): New macro ensures DLLTOOL is always set.
* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS)
<nm_file_list_spec>: New tag variable. Set it to '@' if input
files can be passed to $NM in a file named with the '@' option.
* libltdl/config/ltmain.m4sh (func_mode_link): When
nm_file_list_spec is nonempty, use it to avoid skipped_export.
* doc/libtool.texi (libtool script contents): Document
new variable.
* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
[ cygwin, mingw, cegcc ] <cl*>: Remove all spaces in the
case statement of postlink_cmds to make file name expansion
more unlikely.
(_LT_LANG_CXX_CONFIG): Likewise, but also add the missing |.
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
Fixes a lot of testsuite failures with MSVC 2003 (v8.0) and
above (and perhaps also MSVC .Net) related to running programs
that have been moved (e.g. installed) without their manifests
also having been moved.
* libltdl/m4/libtool.m4 (_LT_PATH_MANIFEST_TOOL): New macro
that locates the Manifest Tool (mt) and verifies that it is
indeed the manifest tool. The result is stored in the new
variable MANIFEST_TOOL.
(_LT_LINKER_SHLIBS) <postlink_cmds>: New tag variable.
[ cygwin, mingw, cegcc ] <cl*>: Embed the manifest file as a
resource. Make sure the embedding work regardless of if the
@OUTPUT@ file name includes a trailing $EXEEXT.
(_LT_LANG_CXX_CONFIG): Likewise.
(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG): Require the above
_LT_PATH_MANIFEST_TOOL.
* libltdl/config/ltmain.m4sh (func_mode_link): After linking
a program, replace @OUTPUT@ in $postlink_cmds and then execute
the commands.
* doc/libtool.texi (libtool script contents): Document
new postlink_cmds variable.
(LT_INIT): Add that the MANIFEST_TOOL environment variable can
be used to override the manifest tool to use.
* tests/exeext.at: New. Make sure linking with both -o prog
and -o prog$EXEEXT works.
* Makefile.am (TESTSUITE_AT): Update.
(TESTS_ENVIRONMENT): Propagate $(MANIFEST_TOOL) to the
testsuite.
* NEWS: Add note of the new MANIFEST_TOOL environment variable.
* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG) [mingw, cygwin]: Add
support for the Microsoft C/C++ Compiler (cl) relying on help
from the compile script in Automake.
* NEWS: Add note of the above.
* tests/getopt-m4sh.at [enhanced shell option appending]:
_LT_AT_XSI_FUNC_EXTRACT will not be able to find the enhanced
libtool func_append function if the replacement wasn't substituted
by configure, since the decorator comments will be different - in
that case simply skip the test.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
