on IRIX 6.5. On IRIX 6.4+, sh is ksh but when the shell is invoked
as "sh" and the current value of the _XPG environment variable is
not equal to 1 (one), the special positional parameter $0, within
a function call, is the name of the function. So, rather than
using "$0" in functions, we set $progpath in the body and use that
everywhere instead (incase of code refactoring later).
(EXIT_SUCCESS, EXIT_FAILURE, EXIT_MISMATCH): For clarity.
* m4/lt~obsolete.m4, tests/cdemo/configure.ac: Arghh. cvsapply just
went crazy and committed a bunch of stuff that shouldn't have been
in the last changeset. The patch backs it all out.
are being used.
* Makefile.am (m4/ltversion.m4): New rule to create it from
m4/ltversion.in.
(nodist_pkgmacro_DATA): Add m4/ltversion.m4.
(EXTRA_DIST): Add m4/ltversion.in.
* m4/libtool.m4 (AC_LIBTOOL_SETUP): AC_REQUIRE LTVERSION_VERSION
from ltversion.m4.
* bootstrap: Call the Makefile.am to create an initial
m4/ltversion.m4.
* ltmain.in: Diagnose version mismatches of various flavours.
* TODO: Remove mismatch item.
* NEWS: Updated.
* configure.ac (CONFIG_STATUS_DEPENDENCIES): This substitution is
how automake-1.8 now informs all Makefiles when config.status
needs to be rebuilt.
Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>
beginning with LT_ and _LT_.
* configure.ac (LT_MAJOR, LT_MINOR, LT_MICRO, LT_ALPHA): Renamed
to lt_major, lt_minor, lt_micro, lt_alpha to save triggering the
unexpanded macros error.
and config.sub executable after they are installed as _DATA.
We can't use _SCRIPTS because the various program name
transforms may be applied to them.
(dist_pkgdata_DATA): List config.guess and config.sub here
(pkgdata_SCRIPTS): instead of here.
rather than running chmod afterwards, preventing a race
condition where the directory could be replaced with a symbolic
link in the time between the two commands.
the 1.5.2 release.
* Makefile.am (cvs-dist): Because we check whether ChangeLog
has been committed, this rule can't be run with uncommitted
source so we can't run 'commit' and don't need to run
'make dist' a second time. Fix CVS tag as it should be
"release-X" not "Release-X".
(cvs_commit): New rule for the cvs-release chain that runs
'commit'
(cvs-release): Depend on cvs-commit, depend on deltas instead of
cvs-diff and xdelta.
(cvs-diff): Removed, replaced with delta-diff.
(delta-diff): Unpack and diff the old and new tarballs rather
than using CVS, so we get a genuinely complete diff.
(xdelta): Removed, replaced with delta-xdelta.
(got-xdelta): New rule for improved reading.
(delta-xdiff): Copied and cleaned up version of old xdelta rule.
(deltas): Depends on delta-diff and delta-xdelta (make deltas).
(cvs-news): Don't depend on timestamps, cvs-dist itself does now.
(prev-tarball): This is the only place we need a LASTRELEASE check
so copy the code here and remove the CHECK_RELEASE variable.
(new-tarball): Check there's a new tarball (did cvs-dist work?)
(FETCHFILES): Remove obsolete libltdl mentions.
* README-alpha: Update CVS instructions as everything's changed
on Savannah.
(Release procedure): Update NEWS and ChangeLog after changing
the version number (both times); Run 'make fetch' after running
'configure' (difficult to do it beforehand); Require 'commit'
before 'make cvs-dist' as that checks ChangeLog is committed;
'make deltas' instead of 'cvs-diff' and 'xdelta', pass LASTRELEASE
to make instead of OLDVERSION (and it's mandatory); Clean up
uploading paragraph; Clearer announcement sending instruction;
Removed ftp-upload@gnu.org mail as that's not necessary now;
Make web page updating instructions a bit clearer; Add an instruction
to update the manual for non-alphas.
(Alpha release note template): Add a Subject; update CVS instructions.
(Full release note template): Add a Subject; update CVS instructions.
* configure.ac: Add dist-bzip2 to AM_INIT_AUTOMAKE as we talk
about bz2 files in our release announcements; remove old reference
to OLDVERSION.
which were copying Makefile.in from the libtool tree into the
package running libtoolize. Now we explicitly list the files to
copy to force the package to generate its own Makefile.in:
* libltdl/Makefile.am (libltdl_la_SOURCES, libltdlc_la_SOURCES):
Add ltdl.h.
(ltdldatadir): New variable for installation directory of
libtoolize --ltdl files.
(ltdldata_DATA): Tell automake what files to copy there at install
time (and remove at unistall time!).
(local-install-files): Removed. This hack is not required
anymore, the automake generated install rules are much more
advanced than this.
* Makefile.am (install-data-hook, uninstall-local): Removed.
Libltdl files for libtoolize are installed by their own Makefile
now.
(e.g. Intel Linux icc compiler) write temporary files to the current
directory. These compilers do support -c and -o simultaneously but
wrongly fail the test due to the failure to create temporary
files. It is incorrect to penalize compilers which write temporary
files to the current directory so the 'chmod -w .' is therefore
removed.
AIX has a brain-dead grep that only handles lines < 2048
characters. Default GREP incase we are not using a future
autoconf that sets it for us :-) Changed all callers to use $GREP
instead of grep, and to AC_REQUIRE LT_AC_PROG_EGREP.
Declare GREP as a libtool config var.
* ltmain.in: Use it.
* tests/sh.test (scripts): Accept `if $GREP "^foo=bar"' by
tightening the regexp.
Reported by Albert Chin-A-Young <china@thewrittenword.com>
$top_srcdir.
* m4/ltdl.m4 (AC_LIB_LTDL): Run AC_CONFIG_HEADERS for the user if
necessary. Calculate filename from first argument to
AC_CONFIG_HEADERS, and substitute as CONFIG_H.
* libltdl/Makefile.am (AM_CPPFLAGS): Make sure we are searching in
$top_srcdir for headers.
(DEFS): Override the default HAVE_CONFIG_H with the config.h
filename.
(ltdl.lo): Reference config.h via $(CONFIG_H).
* libltdl/ltdl.c (HAVE_CONFIG_H): Ditto.
macro definitions which stop the contents of an installed
libtool.m4 ending up in our aclocal.m4 when we bootstrap.
* Makefile.am (pkgmacro_DATA): Note that we don't need to add
lt~obsolete.m4 to this list.
* m4/libtool.m4 (_LT_COPYING): Factor out copyright message so it
to prevent removal of matching files from the temporary
output directory.
(Debian Bug #221420)
* doc/libtool.texi: document the new option.
* NEWS: announce the new option.
(EXTRA_DIST): Remove m4 macro files; they are automatically
added by automake.
(pkgmacrodir): Where to install libtool macro files.
(pkgmacro_DATA): List installable libtool macro files.
(install-data-local): Remove previous versions of ltdl.m4 and
libtool.m4 from their old location.
* libtoolize.in: Use new pkgmacrodir installed macros when
libtoolizing a project. Treat libtool.m4 and ltdl.m4 specially,
and func_serial_update() any other files from pkgmacrodir.
(pkgmacrodir): Where to find installed libtool macro files.
(aclocaldir): Removed.
(func_copy_all_files): Add an optional callback parameter to
control how files are copied. If the callback is passed, don't
tell it whether it can copy or not.
(func_serial): Exchange parameters and make macro_regex optional,
so that this function can be used to extract serial numbers from
files with the traditional /^# serial [1-9][0-9]*$/ syntax.
Changed all callers.
(func_serial_update): Make macro_regex optional last parameter, so
that this function can be used as a callback for
func_copy_all_files(). Changed all callers.
* m4/ltsugar.m4: Add a serial number.
libtool via config.status. The old way involved manually
synchronising disparate bits of shell code in several macros, to
quote a copy of a shell variable, put that in config.status, maybe
add it to some quotation loops to prevent early expansion, and
then add a block to _LT_CONFIG_COMMANDS to bring it into the
libtool script. The new way is to mark shell variables for
propogation using _LT_DECL for language independent variables, or
_LT_TAGDECL for those that need to be propogated in several
language flavours. The marking can be done in the macro that
probes the variables, and this new m4 machinery takes care of
synchronising all the other bits of code at autoconf time:
* m4/ltsugar.m4: New file. Macros that are useful outside the
context of libtool. Initially, contains some generalised list
management macros, and the scaffolding for dictionary type data
storage and retrieval.
* Makefile.am (aclocal_macros): Install ltsugar.m4.
* m4/libtool.m4 (_LT_DECL): Mark a shell variable for export to
the libtool script, along with a comment, and hints for quoting
and renaming.
(_LT_TAGDECL): Similarly mark a tagged shell variable for export
in each tag.
(lt_decl_tag_varnames, lt_decl_quote_varnames)
(lt_decl_dquote_varnames, lt_decl_varnames_tagged)
(lt_decl_all_varnames): New utility macros for managing lists of
shell variable names from _LT_DECL and _LT_TAGDECL.
(_LT_CONFIG_STATUS_DECLARATIONS, _LT_CONFIG_STATUS_DECLARE):
Expand to correctly quoted variable declarations in config.status
from all marked shell variables.
(_LT_LIBTOOL_DECLARE): Expand to commented and quoted variable
declaration for libtool tag section.
(_LT_LIBTOOL_CONFIG_VARS, _LT_LIBTOOL_TAG_VARS): Pass all marked
variables to _LT_LIBTOOL_DECLARE.
(_LT_CONFIG_COMMANDS): Use _LT_CONFIG_STATUS_DECLARATIONS and
friends to generate all the variable passing shell code for
config.status, to get marked variables from libtool.m4 into
libtool itself eventually.
(AC_LIBTOOL_CONFIG): Generate marked variable code for libtool tag
configuration. Changed all client macros to mark variables
suitably rather than the hand pasting that was necessary
previously.
(AC_PROG_SED): Renamed from LT_AC_PROG_SED.
(LT_AC_PROG_SED): Wrap AC_PROG_SED, and mark shell variables for
propogation to the libtool script.
* m4/ltmain.in: Don't use the mkdir -p option when creating a
temporary output directory so a symlink attack can't be used to
arbitrarily chmod other directories on the system if libtool
gets run as root.
* m4/libtool.m4 (AC_LIBTOOL_CONFIG): Add extra blackslash
in front of all the inner double-quotes as this is removed
on Solaris, IRIX and AIX leading to broken definitions
in config.status.
bumping the version to 1.6 for the next release) is committed, the
timestamp in ChangeLog is updated, but ltmain.sh and libtoolize
inherit the pre-commit build number from config.status. This
delta notes the change in build number in the unstamped ChangeLog
and forces a rerun of configure etc. to roll a new ltmain.sh with
the correct TIMESTAMP:
* Makefile.am (stamp-vcl): We actually need a new config.status to
force the correct timestamp into libtoolize and ltmain.sh,
rerunning autoconf has no effect at all if configure.ac hasn't
changed.
libtoolize scripts to update when the TIMESTAMP changes in
ChangeLog, but the file modification time doesn't (e.g in cvs
commit). Otherwise we'll carry on releasing tarballs with the
wrong version numbers in the tools!
* configure.ac: Make the banner more like suggestions in
http://www.gnu.org/prep/standards_toc.html Section 4.6.
* libtoolize.in: Make --version output conform to the GNU
standard.
* ltmain.in: Ditto. And tweak the generated file headers to
match.
isn't enough, because the TIMESTAMP in configure is still out
of date.
(configure): We actually need a new configure to force the
correct timestamp into ltmain.sh.
isn't enough, because the TIMESTAMP in config.status is still out
of date.
(config.status): We actually need a new config.status to force the
correct timestamp into ltmain.sh.
truthfully, and the difference between bootstrap and user
dependencies.
* configure.ac (AM_INIT_AUTOMAKE): List AUTOMAKE_OPTIONS here.
* Makefile.am, doc/Makefile.am, tests/Makefile.am
(AUTOMAKE_OPTIONS): Removed from here.
AC_PACKAGE_VERSION.
* Makefile.am (distdir): Remove dependency on timestamps so that
it is possible to roll a dist without contacting the cvs server.
Use `make cvs-release' for that.
(cvs-news): Extracted from cvs-dist.
(cvs-dist): Depend on cvs-news.
(CHECK_LASTRELEASE): Check LASTRELEASE has been set.
(prev-tarball): New rule. Use LASTRELEASE to make sure the
previous release tarball is present.
(cvs-diff): Use CHECK_LASTRELEASE.
(xdelta): Ditto.
(cvs-release): Depend on prev-tarball, timestamps, cvs-news and
fetch. Provided you set LASTRELEASE appropriately, making a full
cvs release is just a matter of `make cvs-release', and submitting
the files to ftp-upload.
_LT_CONFIG_COMMANDS.
(_LT_AC_TAG_CONFIG, AC_LIBTOOL_CONFIG): Accumulate tag generation
for `config.status' using _LT_CONFIG_SAVE_COMMANDS. Remove
AC_MSG_NOTICE noise now that libtool is generated by a single
config.status tag.
* Makefile.am (libtool): Specify CONFIG_COMMANDS properly now that
libtool is generated in one pass.
tests/Makefile.am.
(DIST_MAKEFILE_LIST): Adjust to compensate for having removed the
`tests/' part in CONF_SUBDIRS.
* tests/Makefile.am (DIST_SUBDIRS): Distribute these directories.
(SUBDIRS): Set to `.', a NOP, to workaround an automake bug which
ignores DIST_SUBDIRS unless SUBDIRS is also set.
* Makefile.am (DIST_SUBDIRS): Don't try to distribute the tests
subdirectories from here, since the recursive automake dist rule
only works with direct child directories. Defer to
tests/Makefile.am in this case.
-prefer-pic and -prefer-non-pic until after tagged configuration
has been read. In link mode, read tagged configuration before
parsing any arguments. These arguments will now work when using
a non-C compiler.
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Declare just
the tags we need using AC_LIBTOOL_TAGS, reducing the size of the
configure script by 50% in most cases.
then tweak the results by hand:
* m4/libtool.m4 (AC_PROG_LD): In common with all the other
AC_PROG_ macros, AC_SUBST the discovered LD.
(AC_PROG_NM): Similarly for NM.
(LT_AC_PROG_SED): Similarly for SED.
* configure.ac: No need to SUBST NM and LD manually any more.
(AC_PREREQ): Conservatively downgrade from 2.59 to 2.54.
* tests/cdemo/configure.ac, tests/demo/configure.ac,
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Ditto.
* m4/libtool.m4 (AM_PROG_LIBTOOL, AM_ENABLE_SHARED,
AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC,
AM_PROG_LD, AM_PROG_NM): AU_DEFUN these macros so autoupdate can
use the newer definitions.
are in fact now rather complicated. This delta updates the
release instructions to the describe the new process, and updates
the maintainer rules to help automate many of the steps:
* README-alpha: Updated release instructions.
* Makefile.am (GPG): Name of the program for generating signatures
for files to be uploaded.
(XDELTA, XDELTA_OPTIONS): Invocation of xdelta.
(cvs-dist): Run distcheck before tagging the cvs tree incase
distcheck fails, and then generate the gpg signature files.
(cvs-diff): Generate the gpg signature files for the diff.
(xdelta): New rule for generating the xdelta diffs and associated
gpg signature files.
(cvs-release): New rule to do all of the above, if you don't mind
typing your gpg passphrase over and over again. :-)
(fetch): New rule inspired by automakes similar rule for updating
files maintained outside the project.
* config/config.guess, config/config.sub: Updated with the new
fetch rule.
added to the list, in exchange for appending loaders to the list
with O(N) rather than O(1). The longest the loader list can ever
get is 4 (on cygwin with dld installed) so it probably constitutes
a small speedup, in addition to making the code much more readable.
ltmain unconditionally.
(_LT_PROG_LTMAIN): New macro to ensure that the
shell variable `ltmain' actually points at a suitable `ltmain.sh'.
(_AC_PROG_LIBTOOL): Require it.
(AC_LIBTOOL_CONFIG, _LT_AC_TAG_CONFIG): Invoke it.
* Makefile.am (libtool): ltmain.sh is in the build tree.
* libltdl/configure.ac: Ditto.
and $finalize_deplibs for programs) when found on the command line
or in a .la file's dependency_libs (but don't place them there) so
they are honoured when linking both programs and libraries.
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac:
s/AM_PROG_LIBTOOL/AC_PROG_LIBTOOL/. Marching boldly into the 21th
century :-$
AC_DISABLE_SHARED, AC_ENABLE_STATIC, AC_DISABLE_STATIC,
AC_ENABLE_FAST_INSTALL, AC_DISABLE_FAST_INSTALL, AM_PROG_LIBTOOL,
AM_ENABLE_SHARED, AM_ENABLE_STATIC, AM_DISABLE_SHARED,
AM_DISABLE_STATIC): These macros must be AC_DEFUNed after all,
otherwise aclocal can't find them when it tries to construct
`aclocal.m4'.
* Adjust ChangeLog dates to be when I committed, not when I posted
the patches.
* Adjust name/e-mail in ChangeLog to be the authors of the patches.
* Add missing NEWS entry for Owen's patch.
(_LT_AC_SYS_LIBPATH_AIX, _LT_AC_SHELL_INIT,
_LT_AC_PROG_ECHO_BACKSLASH, AC_LIBTOOL_LINKER_OPTION,
AC_LIBTOOL_TAGS, _LT_AC_TAG_CHECK, _LT_AC_TAG_CONFIG,
AC_ENABLE_SHARED, AC_DISABLE_SHARED, AC_ENABLE_STATIC,
AC_DISABLE_STATIC, AC_ENABLE_FAST_INSTALL,
AC_DISABLE_FAST_INSTALL, _LT_AC_LANG_C_CONFIG,
_LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG, AC_LIBTOOL_CONFIG,
_LT_AC_TAGVAR, AM_PROG_LIBTOOL, AM_ENABLE_SHARED,
AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC): Use
m4_define instead of AC_DEFUN for internal macros that do not
AC_PROVIDE or AC_REQUIRE, and documented user macros that cannot
be AC_REQUIREd because they need arguments, or because that would
violate the documented API.
delay_single_quote_subst sed script to quote single quotes in
variables that are copied to `config.status'.
(_LT_CONFIG_STATUS_DECLARE): New macro to apply
delay_single_quote_subst to a named variable.
(AC_LIBTOOL_CONFIG): Use _LT_CONFIG_STATUS_DECLARE to declare all
`configure' variables that are copied to `config.status'.
(AC_LIBTOOL_PROG_COMPILER_PIC): Fix a quoting bug exposed by
_LT_CONFIG_STATUS_DECLARE using the null quadrigraph in the
rvalues of lt_prog_compiler_pic.
binary wrapper used with uninstalled executables breaks when
invoked via execlp/execvp (that is, via $PATH). Handle that case.
(fnqualify): Subsumed into find_executable.
when extracting symbols from an import lib (occurs if
--enable-shared --disable-static), the output of
$global_symbol_pipe is not the same as when extracting from a
static library (the default case). Add extra filters to
$export_symbols_cmds to process this sort of output in addition to
'normal' static-lib output.
(LT_USE_WINDOWS_DIRENT_EMULATION): Move to after include "ltdl.h",
as they are affected by __WINDOWS__ definition.
(LT_READTEXT_MODE): Use textmode to read .la files.
(lt_dlinit): Use LoadLibrary loader as a fallback on cygwin.
defined, unless __CYGWIN__ or __CYGWIN32__ are defined.
(LT_SCOPE): Now set without reference to __CYGWIN__ definition,
since __WINDOWS__ now implies !__CYGWIN__ after canonicalisation.
(LT_PARAMS, lt_ptr): Use canonicalised __WINDOWS__ to determine
which values to set these macros to.
checkout by generating ltmain.sh, using that to create libtool,
and then adding the tags to that, all from config.status.
* configure.ac (AC_CONFIG_FILES): Make config/ltmain.sh, and copy
it to libltdl.
* Makefile.am ($(srcdir)/config/ltmain.sh): This file is now
created by config.status. Adjust this rule.
(libtoolize): Set CONFIG_COMMANDS to empty to prevent regenerating
the libtool script as a side effect of running this rule.
* libtool.m4: Bump serial number. Fix comment typos.
(_LT_CONFIG_LIBTOOL_INIT, _LT_CONFIG_LIBTOOL,
_LT_CONFIG_SAVE_COMMANDS, _LT_CONFIG_COMMANDS: New macros. They
don't work for some reason - the variable value quoting in the
init section is all wrong. Not used at the moment.
(AC_LIBTOOL_CONFIG): Generate libtool from config.status.
(_LT_AC_TAG_CONFIG): Add the tags in config.status.
(compiler_DEFAULT): Save the compiler value for the DEFAULT tag,
or it gets overwritten by the other macros.
(EOF): Globally replace with _LT_EOF to avoid namespace pollution.
* tests/demo/configure.ac (STATIC): Check $enable_static instead
of running ./libtool which doesn't exist yet.
(BINARY_HELLDL): Check $lt_cv_sys_global_symbol_pipe with case
instead of grepping ./libtool which doesn't exist yet.
* tests/pdemo/configure.ac (STATIC, BINARY_HELLDL): Ditto.
* doc/libtool.texi (AC_PROG_LIBTOOL): Add some notes about trying
to get config details from `libtool --config'.
* NEWS: Updated.
check method back to a working objdump-based test. This is not as
concrete a test as using the 'file' command, but it does not
require that the 'file' command be available.
for AC_LIBTOOL_TAGS macro to specifify libtool tags. The now
defunct --with-tags option was never documented.
* m4/libtool.m4: Restrict the list of tags that can be created
with a new AC_LIBTOOL_TAGS([tag1 tag2 ...]) macro. Deprecate
--with-tags.
already built with libtool...
(libhell0_a_LIBADD): ...instead name the objects directly. This
prevents a long standing warning from automake 1.7+.
* pdemo/Makefile.am (libhell0_a_SOURCES, libhell0_a_LIBADD):
Ditto.
comment incase they get left around.
(LIBTOOLIZE): Use a dummy script to prevent the installed
`libtoolize' from trashing the distributed libtool.m4,
config.guess and config.sub.
tests/defs, and move the various demo directories out of
$top_srcdir, and into tests too. The refactoring showed up a
number of inconsistencies and latent bugs, as well as fixing (I
think!!) the long-standing annoyance with some of the tests giving
spurious failures intermittently. While I was here, emacs kindly
removed a lot of bogus whitespace and added copyright notices for
us:
* cdemo, demo, depdemo, f77demo, mdemo, mdemo2, pdemo, tagdemo:
Moved from here...
* tests/cdemo, tests/demo, tests/depdemo, tests/f77demo,
tests/mdemo, tests/mdemo2, tests/pdemo, tests/tagdemo: ...to
here.
* tests/defs: Factor much common functionality from the test
scripts into shell functions. Added a copyright notice.
* tests/assign.test, tests/cdemo-conf.test, tests/cdemo-exec.test,
tests/cdemo-make.test, tests/cdemo-shared.test,
tests/cdemo-static.test, tests/demo-conf.test,
tests/demo-deplibs.test, tests/demo-exec.test,
tests/demo-inst.test, tests/demo-make.test,
tests/demo-nofast.test, tests/demo-nopic.test,
tests/demo-pic.test, tests/demo-shared.test,
tests/demo-static.test, tests/demo-unst.test,
tests/depdemo-conf.test, tests/depdemo-exec.test,
tests/depdemo-inst.test, tests/depdemo-make.test,
tests/depdemo-nofast.test, tests/depdemo-shared.test,
tests/depdemo-static.test, tests/depdemo-unst.test,
tests/f77demo-conf.test, tests/f77demo-exec.test,
tests/f77demo-make.test, tests/f77demo-shared.test,
tests/f77demo-static.test, tests/link-2.test, tests/link.test,
tests/mdemo-conf.test, tests/mdemo-exec.test,
tests/mdemo-inst.test, tests/mdemo-make.test,
tests/mdemo-shared.test, tests/mdemo-static.test,
tests/mdemo-unst.test, tests/mdemo2-conf.test,
tests/mdemo2-exec.test, tests/mdemo2-make.test, tests/nomode.test,
tests/pdemo-conf.test, tests/pdemo-exec.test,
tests/pdemo-inst.test, tests/pdemo-make.test,
tests/pdemo-unst.test, tests/quote.test, tests/sh.test,
tests/suffix.test, tests/tagdemo-conf.test,
tests/tagdemo-exec.test, tests/tagdemo-make.test,
tests/tagdemo-shared.test, tests/tagdemo-static.test: Refactored
to use new functions in tests/defs. Added a copyright notice.
* tests/hardcode.test, noinst-link.test,
tests/relink.test, tests/relink.test,
tests/mdryrun.test: Ditto. Moved from here...
* tests/demo-hardcode.test, demo-noinst-link.test,
tests/demo-relink.test, tests/depdemo-relink.test,
tests/mdemo-dryrun.test: ...to here respectively.
* Makefile.am: Added a copyright notice.
* tests/sh.test: Check libtoolize.in for non-portabilities too.
* libtoolize.in: Fix non-portabilities found by tests/sh.test.
specified in compile mode.
Do not make a static library when `-shared' is specified in link
mode.
* doc/libtool.texi (Compile mode): Document it.
* NEWS: Updated.
* Makefile.am (AUTOMAKE_OPTIONS): Reduced to 1.7. The 1.8
requirement just made the distribution much smaller due to
m4_includes. 1.7 will bootstrap libtool just fine.
* NEWS: Updated.
* config.guess, config.sub, mkstamp: Moved from here...
* config/config.guess, config/config.sub, config/mkstamp: ...to
here, respectively.
* libtool.m4, ltdl.m4: Moved from here...
* m4/libtool.m4, m4/ltdl.m4: ...to here, respectively.
* configure.ac: Removed various acinclude.m4 hackery, as these
files are no longer needed with automake 1.8.
* Makefile.am: Removed various acinclude.m4 hackery, as these
files are no longer needed with automake 1.8.
(AUTOMAKE_OPTIONS): Require CVS automake.
(CONF_SUBDIRS, CFLAGS, CPPFLAGS, LDFLAGS, LIBS, FFLAGS, FLIBS):
Automake now makes a Make variable from every AC_SUBST, so these
are NOP.
(aclocal_macros): These files are now in their own m4 subdir.
Changed all clients.
(EXTRA_DIST): mkstamp has moved to the new config subdir. Changed
all clients.
(pkgdata_SCRIPTS): Ditto wrt config.guess and config.sub.
(pkgdata_DATA): Ditto wrt ltmain.sh.
* f77demo/configure.ac, libltdl/configure.ac (AM_CONFIG_HEADER):
Is deprecated in favour of AC_CONFIG_HEADERS. Updated to the
latter.
* Makefile.am, cdemo/Makefile.am, demo/Makefile.am,
depdemo/Makefile.am, f77demo/Makefile.am, mdemo/Makefile.am,
mdemo2/Makefile.am, pdemo/Makefile.am, tagdemo/Makefile.am
(EXTRA_DIST): Remove acinclude.m4.
(ACLOCAL_AMFLAGS): Search new `m4' macro directory.
* configure.ac, cdemo/configure.ac, demo/configure.ac,
depdemo/configure.ac, f77demo/configure.ac, mdemo/configure.ac,
mdemo2/configure.ac, pdemo/configure.ac, tagdemo/configure.ac
(AC_CONFIG_AUX_DIR): Declare that config helper scripts are now
kept in the new config subdir.
* libltdl/configure.ac (AC_CONFIG_AUX_DIR): Removed. Defaults to
`.' anyway.
* mdemo2/main.c: Use LTDL_SET_PRELOADED_SYMBOLS().
* mdemo2/Makefile.am: Set INCLUDES properly and add -dlopen force
to make sure the symbols file is included in the link line.
AC_CHECK_HEADER with compiler rather than preprocessor.
(AC_LIBTOOL_SETUP): ...which was introduced in autoconf-2.56, so
we AC_PREREQ that version.
* ltdl.m4 (AC_WITH_LTDL, AC_LIB_LTDL, AC_LTDL_FUNC_ARGZ): Ditto.
to maintain an lt_dlrealloc function pointer, it is too difficult
to implement realloc as malloc/memcpy/free without knowing the
size of the original block. rpl_realloc has been deprecated since
2002-10-30, but kaffe has real failures with that so it's time to
bite the bullet. Caller gets to maintain lt_dlrealloc:
* NEWS (1.5.1): Updated.
* libltdl/ltdl.c (LT_DLREALLOC): Use lt_dlrealloc so the user can
update the function pointer to match lt_dlmalloc.
(lt_emalloc): Use lt_dlrealloc rather than hardcoding realloc.
* doc/libtool.texi (Libltdl interface): Describe lt_dlrealloc now
that it too has become part of the exported interface to libltdl.
user set MACOSX_DEPLOYMENT_TARGET to 10.3 or greater.
* libltdl/ltdl.c (dyld): Save the error from the first lookup
to report in lt_dlerror(). Otherwise the error is always
"Symbol _foo not in /usr/lib/libSystem.dylib".
Thanks to Chris Zubrzycki for reporting this.
Robert Millan's patch requires it.
* libtool.m4: Fixed to use the new GNU/FreeBSD triplet.
* ltdl.m4: Fixed to use the new GNU/FreeBSD triplet.
* ltmain.in: Remove GNU/FreeBSD cases, which are no longer needed.
* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on all
mips*-linux* variants.
* libtool.m4 Switch on $CC and add paterns to cases.
* libtool.m4: Move the AC_LIBTOOL_SYS_DYNAMIC_LINKER check
to be before AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH, becuase the
value of shlibpath_overrides_runpath is used in the HARDCODE
test and is set in the DYNAMIC_LINKER test.
* ltmain.in [darwin]: We never need to relink on darwin.
* libtool.m4: Switch on $CC and add patterns to cases.
tests/demo-nopic.test, tests/demo-pic.test,
tests/demo-shared.test, tests/demo-static.test,
tests/depdemo-conf.test, tests/depdemo-nofast.test,
tests/depdemo-shared.test, tests/depdemo-static.test:
Pass build system type to tests to support environment
where default system type not equal to build system type
(eg. 64-bit HP-UX).
* configure.ac: Bumped version to 1.5a.
GNU libtool 1.5 was released.
* configure.ac: Bumped version to 1.5.
* NEWS: updated.
* README-alpha: Updated upload instructions.
* README: Changed typo in version description.
* config.guess, config.sub, texinfo.tex: Synchronized from
ftp.gnu.org.
to be before AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH, becuase the
value of shlibpath_overrides_runpath is used in the HARDCODE
test and is set in the DYNAMIC_LINKER test.
* ltmain.in(darwin): We never need to relink on darwin.
* tests/defs: Set CONFIG_SITE to /nonexistent, except on DJGPP,
which requires its config.site, to work correctly.
* tests/cdemo-conf.test, tests/cdemo-shared.test,
tests/cdemo-static.test, tests/demo-conf.test,
tests/demo-nofast.test, tests/demo-nopic.test,
tests/demo-pic.test, tests/demo-shared.test,
tests/demo-static.test, tests/depdemo-conf.test,
tests/depdemo-nofast.test, tests/depdemo-shared.test,
tests/depdemo-static.test, tests/f77demo-conf.test,
tests/f77demo-shared.test, tests/f77demo-static.test,
tests/mdemo-conf.test, tests/mdemo-shared.test,
tests/mdemo-static.test, tests/pdemo-conf.test,
tests/tagdemo-conf.test, tests/tagdemo-shared.test,
tests/tagdemo-static.test: Don't set CONFIG_SITE, now that
tests/defs sets it.
* tests/cdemo-exec.test, tests/demo-exec.test,
tests/demo-inst.test, tests/depdemo-exec.test,
tests/depdemo-inst.test, tests/f77demo-exec.test,
tests/mdemo-exec.test, tests/mdemo-inst.test,
tests/pdemo-exec.test, tests/pdemo-inst.test,
tests/tagdemo-exec.test: When checking for the existence
of executables, use the executable file extension from $EXEEXT.
