the ltcf-*.sh and ltconfig.in files from multi-language-branch:
* libtool.m4: More refactoring and reformatting.
(_LT_AC_LANG_GCJ_CONFIG): Merged ltcf-gcj.sh from
multi-language-branch.
(_LT_AC_LANG_CXX_CONFIG): Merged ltcf-cxx.sh from
multi-language-branch.
* configure.in (AC_PROG_CXX, LT_AC_PROG_GCJ): Compiler checks must
be done before AC_PROG_LIBTOOL which appends tags based on their
results.
multi-language-branch.
* configure.in: Added pdemo and tagdemo to CONF_SUBDIRS
and merged references to CXX and GCJ from multi-language-branch.
*pdemo: Added test directory from multi-language-branch.
*tagdemo: Added test directory from multi-language-branch.
*tests/Makefile.am: Merged additional tests from
multi-language-branch.
*tests/pdemo-*.test: ditto.
*tests/tagdemo-*.test: ditto.
necessary.
* Makefile.am (libtool): Reworked rule for regeneration of libtool,
now that it is built entirely withing config.status.
(libtoolize): Tidied for orthogonality with the other generation
rules.
(ltconfig): This is now generated by AC_PROG_LIBTOOL, called from
make by running config.status --recheck.
(ltmain.sh): Moved primary generation of this file into here...
* configure.in (AC_OUTPUT): ...instead of here.
* libtool.m4 (AC_OUTPUT_COMMANDS): Write the config to ltconfig
where it can be reused, rather than directly to libtool.
* demo/configure.in: libtool is no longer present immediately
after AC_LIBTOOL_M4 has completed, so the tests now grep through
ltconfig instead -- which *will* be present.
more conformity with cvs autoconf.
Removed emacs hack-local-variables, since there is now a
proper Autoconf major mode.
Removed a couple of changequote()s.
bug in Autoconf-2.13 AC_REQUIRE implementation which inserted
some of the expanded tests too early in the generaated configure.
(_AC_PROG_LIBTOOL): renamed to AC_PROG_LIBTOOL, and defines
itself to an empty expansion to prevent multiple expansions.
configure.in (AC_LIBTOOL_SETUP): Replaced by a call to
AC_PROG_LIBTOOL now that the AC_REQUIRE bug has been worked
around.
configure.in interacts badly with the AC_PROVIDE calls and
results in several tests being inserted into configure too
early. Use AC_LIBTOOL_SETUP instead.
from ltconfig, so that ltmain.sh and then libtool are
generated at configure time.
* Makefile.am: Don't generate ltmain.sh or ltconfig anymore.
* bootstrap: ltconfig is no more!
* configure.in: Call AC_PROG_LIBTOOL directly.
(AC_OUTPUT): Generate tmain.sh.
* libtool.m4: Don't build an argument list for ltconfig.
(_LT_AC_LTCONFIG_HACK): Refactoring of the former contents of
ltconfig.in to take advantage of the m4 macros from autoconf.
* ltmain.in: Don't do a version check against ltconfig.
* tests/assign.test: Remove reference to ltconfig.
* tests/hardcode.test: ditto.
* tests/sh.test: ditto.
AC_SUBST, `AC_SUBST(FILE)' can never work. Use MAGIC as the
holder of the command to run in file_magic_cmd instead.
* ltconfig.in: s/FILE/MAGIC/g.
* libtool.m4 (AC_PROG_LIBTOOL): set MAGIC in the environment when
calling ltconfig.
(AC_PATH_MAGIC): renamed from AC_PATH_FILE.
(AC_PATH_TOOL_PREFIX): s/FILE/MAGIC/g. Also set file_magic_cmd
to '${MAGIC}' so that make can grok it.
* Makefile.am (libtool):
(clibtool): ditto.
was set to the opposite of what it should be.
* configure.in (AC_LIBTOOL_WIN32_DLL): Call to this macro is
required for libtool configury to test lt_cv_need_dllmain on
Windows.
* doc/libtool.texi (using libltdl): document new lt_dlinfo struct,
replace NULL with @code{NULL}, document lt_dlsetdata(),
lt_dlgetdata() and lt_dlgetinfo()
* libltdl/Makefile.am: increment interface version number
* libltdl/configure.in: set version number to 1.1
* libltdl/ltdl.c: make some variables public by moving them
to the info struct, add support for application specific data
within module handles, new lt_dlsetdata(), lt_dlgetdata() and
lt_dlgetinfo() functions,
fix memory leaks, minor cleanups
* libltdl/ltdl.h: ditto
* mdemo/main.c: demonstrate use of lt_dlgetinfo,
improved handling of errors
* ltconfig.in: set hardcode_into_libs = yes for GNU/Hurd, Linux
and Solaris, only hardcode *all* run-paths if hardcode_into_libs
is set to 'all', otherwise hardcode only user-specified rpaths
into libraries
* ltmain.in: minor cleanups, we don't need to add user-specified
rpaths to compile_rpath, finalize_rpath is sufficient
* ltconfig.in: transform linux* -> *linux-gnu* _after_ host_os has
been set! (reported by Bruno Haible <haible@ilog.fr>)
* configure.in: AC_SUBST reload_flag, deplibs_check_method
and file_magic_cmd
* README: use 'libtool --version' instead of 'ltconfig --version'
(suggested by Francios Pinard <pinard@iro.umontreal.ca>
* libltdl/ltdl.m4: that no longer exists.
* configure.in (ACINCLUDE_M4_LIST): Removed libltdl/acinclude.m4.
* Makefile.am (aclocal_macros): Added ltdl.m4.
(libltdl/acinclude.m4): Concatenate libtool.m4 and ltdl.m4.
* bootstrap: Likewise.
* libltdl/Makefile.am (ACLOCAL): Remove the definition. Relying
upon -I may lead to duplicates.
* doc/libtool.texi: Suggest appending ltdl.m4 to acinclude.m4.
* libtoolize.in: Check AC_LIB_LTDL version number in aclocal.m4.
ltconfig.in.
* ltconfig.in: replaced several of the simple feature tests with
substitutions from config.status.
* Makefile.am (ltconfig): generate ltconfig with config.status.
* configure.in (AC_OUTPUT): generate ltconfig with config.status.
AC_CHECK_TOOL in AC_LIBTOOL_SETUP.
* libtool.m4 (AC_PROG_LIBTOOL): Pass the $build variable to
ltconfig.
(AC_PROG_RANLIB): replaced with AC_CHECK_TOOL.
* ltconfig.in (build): new variable to hold the build triplet
which is now checked for unless --no-verify is specified.
(--build): new argument to set the build triplet.
(ranlib): Prefer ${host_alias}-ranlib[.exe] if $build is different
to $host.
* doc/libtool.texi (Invoking ltconfig): Document --build option.
* NEWS: Note --build option.
* NEWS: inter-library dependencies are now supported
* configure.in: add the depdemo subdirectory
* depdemo/*: new demo to demonstrate inter-library dependencies
* tests/depdemo*: new tests for depdemo
* ltconfig.in: added hardcode_into_libs (whether library paths
should be hardcoded into the libraries),
it currently defaults to 'no'
* ltmain.in: new internal 'relink' mode to relink libraries
on platforms with hardcode_into_libs=yes, save command line
arguments in libtool_args, accept relative -L directories,
ignore -lm on BeOS and Cygwin, always ignore -lc,
handle -l, -L and .la arguments later, always make the library
installation directory (-rpath) absolute, in relink mode don't
delete the not-relinked library and exit immediately after relinking,
try to find already-installed libtool libraries that were specified
using -l, support hardcoding of library paths into libraries too,
export shlibpath before linking libraries, and a lot of other
big changes that I don't want to describe here... please read
the source.
* merged Gary's Win32 code from the ILD branch:
* NEWS: Win32 DLLs are now supported
* TODO: removed .a library namespace clash for win32. It is
now resolved.
* ltconfig.in (cygwin, library_names_spec): removed $libname.a.
Creating a dll with libtool no longer creates an import library.
* ltconfig.in (extract_expsyms_cmds): Create $objdir if it does
not exist -- i.e. we need to generate import an import library
in a directory which has no libs of its own.
* doc/libtool.texi (old_archive_from_expsyms_cmds,
extract_expsyms_cmds): documented these new variables.
* ltconfig.in (extract_expsyms_cmds): New variable. Commands to
extract the exported symbol list from a dll.
(old_archive_from_expsyms_cmds): New variable. Commands to build
an old archive from the extracted expsyms list.
* ltmain.in: run the cmds in extract_expsyms_cmds and
old_archive_from_expsyms_cmds as necessary.
* ltconfig.in (cygwin, old_archive_from_new_cmds): no longer
required.
* ltconfig.in (cygwin, shlibpath_overrides_runpath): I'm not even
sure whether win32 honours the runpath at all when searching for
a dll to load! Anyway, when set to yes this prevents a gratuitous
warning.
* ltmain.in (deplib): The cygwin environment doesn't actually have
-lm, and although the linker fakes having one, specifiying it to
libtool will break ILD, so we ignore it when generating
dependencies.
avoid introducing multiple --enable options when re-running
config.status
* libltdl/configure.in: if enable_ltdl_* is not set, assume no
* configure.in: if enable_ltdl_install is not set, enable it
configure-work that AC_PROG_LIBTOOL used to do; add
--cache-file=$cache_file to libtool_flags
(AC_PROG_LIBTOOL): call AC_LIBTOOL_SETUP, save the cache, run
ltconfig and reload the cache
* configure.in: run AC_LIBTOOL_SETUP, then set LIBTOOL_FLAGS to
libtool_flags
* ltconfig.in: support --cache-file switch. If it is used, load
the cache in the beginning and save it just before terminating
always configure libltdl, add libltdl/acinclude.m4 to
ACINCLUDE_M4_LIST, disable installation of libltdl if necessary
* libltdl/Makefile.am: set version info for libltdl.la
* libltdl/configure.in: don't check whether
enable_ltdl_convenience/install was set so that libltdl
can be used as independent package (libltdl.tar.gz) without
the need to use --enable-ltdl*
* libltdl/ltdl.c: minor cleanups, allocate the line cache
dynamically (lt_dlopen)
only if --enable-ltdl-install
(CONF_SUBDIRS): list directories that are configured on demand,
but that must be included in the distribution
(ACINCLUDE_M4_LIST, DIST_MAKEFILE_LIST): generated from CONF_SUBDIRS
* Makefile.am (AUTOMAKE_OPTIONS): added version 1.3e and
readme-alpha, to handle README-alpha automatically
(EXTRA_DIST): removed README-alpha
(BUILD_SUBDIRS): subdirectories that are always built
(SUBDIRS): BUILD_SUBDIRS plus BUILD_LTDL
(DIST_SUBDIRS): BUILD_SUBDIRS plus CONF_SUBDIRS, from configure
(all-local, check-local): depend on $(ACINCLUDE_M4_LIST), from
configure, and libtool, so that it is built before subdirs
(configure-subdirs): new target
(configure-subdirs, distdir): depend on $(DIST_MAKEFILE_LIST),
from configure
(@DIST_MAKEFILE_LIST@): create subdir if needed, then run
configure.
On-demand configuration of subdirs at distribution time was
suggested by Gary V. Vaughan <gvaughan@oranda.demon.co.uk>
depdemo commented out, so that `dist' works before `check'
(BUILD_LTDL): will contain libltdl if --enable-ltdl-install
* Makefile.am (DIST_SUBDIRS): expand SUBDIRS and add depdemo,
commented out
(SUBDIRS): add $(BUILT_LTDL)
* libltdl/Makefile.am (EXTRA_LTLIBRARIES): add libtest.la, the
same as libltdl but always a convenience library. Not built by
default. Both libraries now depend on the libtool script, that
depends on ../libtool and is rebuilt when needed
* mdemo/Makefile.am (mdemo, mdemo.debug): depend on and link with
../libltdl/libtest.la, that is rebuilt if needed
(mdemo_LDADD): removed $(LIBADD_M), to avoid silent failures
(foo1.la): renamed from libfoo1.la; test removing the lib prefix
* mdemo/foo1.c: renamed libfoo1_LTX symbols to foo1_LTX
* mdemo/main.c: don't include string.h nor math.h, nor refer to
sin nor cos
* tests/mdemo-exec.test: renamed libfoo1.la to foo1.la
* tests/mdemo-inst.test: ditto
