* Makefile.am, Makefile.maint: .. install, update it.
* NEWS, doc/libtool.texi (Distributing): .. document it.
Reported by Ross Boylan <ross@biostat.ucsf.edu>.
* tests/Makefile.am: ...to here.
* bootstrap: Adjust. Also, create temporary Makefile from
tests/Makefile.am so that bootstrap can create the Autotest
testsuite.
subdir-objects builds. This marks the beginning of a move to an
Autotest driven test framework, which will eventually allow us to
trim away many of the generated files in the current test demo
subdirectories:
* configure.ac (AC_CONFIG_TESTDIR): Re-enable commented out
Autotest macros.
(AUTOTEST, M4SH): Use --language long hand.
* bootstrap: Generate tests/testsuite, and by implication
tests/package.m4.
* Makefile.am (edit): Add substitutions needed to generate
tests/package.m4 from bootstrap.
(check-recursive): Add tests/testsuite.
(TESTSUITE): The new Autotest testsuite target.
(TESTSUITE_AT): The Autotest sources.
(EXTRA_DIST): Distribute the generated testsuite and sources.
(tests/package.m4): Use $(edit) to propagate package metadata to
the new tests.
(tests/testsuite): Build the testsuite.
(tests/atconfig): How to regenerate the file.
(check-local): Hook Autotest into `make check'.
(installcheck-local): Run the testsuite on the installed tree.
(clean-local): Tidy our file droppings.
* tests/Makefile.am: Remove bitrotted code from Autotest
experiments in Autoconf 2.52 era. Updated the rest and moved into
Makefile.am.
* tests/testsuite.at: New container for Autotest test groups.
* tests/am-subdir.at: New test group for compatibility with
Automake's subdir-objects builds. Currently holds two tests, one
for a C project and another similar project in C++.
* TODO: Add an entry to remind us that these new tests expose a
bug in libtool.
* NEWS: Updated.
with $lt_ECHO, or we always get a libtool with ECHO=echo, rather
than testing for a mechanism that quotes properly.
* NEWS: Updated.
* config/ltmain.m4sh: Need to include getopt.m4sh earlier so that
progpath is set before it is called to --no-reexec.
* NEWS: Updated.
Without this change, the distributed libtool tarball has a
dependency on autom4te. There was some inconsistency in the
filenames: now we have foo.m4sh -> m4sh -> foo.in -> configure
-> foo[.sh]. Bootstrap runs the m4sh steps and the resulting .in
files are distributed:
* tests/Makefile.am (EXTRA_DIST): Distribute defs.m4sh.
* Makefile.am (EXTRA_DIST): Distribute libtoolize.m4sh.
(libtoolize.in, libtoolize): Split into bootstrap and runtime
stages.
($(top_srcdir)/tests/defs.in, $(top_srcdir)/tests/defs): Ditto.
($(top_srcdir)/config/ltmain.sh): Swap ltmain.m4sh and ltmain.in
names.
* bootstrap: Make libtoolize.in and tests/defs.in.
* NEWS: Updated.
for a different host, it can't be shipped. That also means that
defs will always be generated in the build tree, so each test case
can have the srcdir discovery factored away into tests/defs.in:
* Makefile.am (EXTRA_DIST): s/defs/defs.in/g
* tests/Makefile.am (defs): New rule to remake defs from the
parent directory's Makefile.
* tests/cdemo-conf.test, tests/cdemo-exec.test,
tests/cdemo-make.test, tests/cdemo-shared.test,
tests/cdemo-static.test, tests/demo-conf.test,
tests/demo-deplibs.test, tests/demo-exec.test,
tests/demo-hardcode.test, tests/demo-inst.test,
tests/demo-make.test, tests/demo-nofast.test,
tests/demo-noinst-link.test, tests/demo-nopic.test,
tests/demo-pic.test, tests/demo-relink.test,
tests/demo-shared.test, tests/demo-static.test,
tests/demo-unst.test, tests/depdemo-conf.test,
tests/depdemo-exec.test, tests/depdemo-inst.test,
tests/depdemo-make.test, tests/depdemo-nofast.test,
tests/depdemo-relink.test, tests/depdemo-shared.test,
tests/depdemo-static.test, tests/depdemo-unst.test,
tests/f77demo-conf.test, tests/f77demo-exec.test,
tests/f77demo-make.test, tests/f77demo-shared.test,
tests/f77demo-static.test, tests/link-2.test, tests/link.test,
tests/mdemo-conf.test, tests/mdemo-dryrun.test,
tests/mdemo-exec.test, tests/mdemo-inst.test,
tests/mdemo-make.test, tests/mdemo-shared.test,
tests/mdemo-static.test, tests/mdemo-unst.test,
tests/mdemo2-conf.test, tests/mdemo2-exec.test,
tests/mdemo2-make.test, tests/nomode.test, tests/pdemo-conf.test,
tests/pdemo-exec.test, tests/pdemo-inst.test,
tests/pdemo-make.test, tests/quote.test, tests/sh.test,
tests/suffix.test, tests/tagdemo-conf.test,
tests/tagdemo-exec.test, tests/tagdemo-make.test,
tests/tagdemo-shared.test, tests/tagdemo-static.test,
tests/tagtrace.test: Removed srcdir discovery boilerplate...
* tests/defs.in: ...and put it here.
* config/general.m4sh, config/getopt.m4sh: New files with factored
out functionality from...
* config/ltmain.in, libtoolize.in: ...here. m4_include the shared
code, and call AS_SHELL_SANITIZE. Also quote all `[' and `]' to
survive m4 run.
(func_serial): No need to double up m4sh quotes after a `#'.
(func_check_macros): Escape `dnl' to stop m4sh interpreting it as
a macro.
* tests/defs.in: New file expanded into tests/defs by autom4te.
* m4/libtool.m4 (_LT_DECL_EGREP): Also require fgrep for the tests
that use it.
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Now built with
M4SH.
(libtoolize): Ditto.
* bootstrap: Set M4SH for call to make.
* HACKING: No need to sync to AS_SHELL_SANITIZE by hand any more.
below is horrendously broken since it makes the installed libtool
try to run the mkinstalldirs or install-sh helper scripts. This
patch fixes the `make -j' mkdir race condition internally:
* libtoolize.in (func_mkdir_p): New slice and dice algorithm
to build the directory tree one dir at a time, ignoring errors
until the end incase they are transient due to a concurrent
identical mkdir.
* tests/defs (func_mkdir_p): Ditto.
* config/ltmain.in (func_mkdir_p): Ditto, except that ltmain.in
uses $echo rather than $ECHO, and uses $show and $run to interact
correctly with the command line.
* configure.ac (AM_INIT_AUTOMAKE): 1.8 is sufficient again.
* Makefile.am (edit): Don't substitute automake's $(mkdir_p).
* NEWS: Updated.
already exists warnings" for .lib directory. Build on automake
wisdom to support make -j builds where a suitable mkdir is
available:
* configure.ac (AM_INIT_AUTOMAKE): Require 1.9, which goes to some
trouble to find a $(mkdir_p) that doesn't interfere with make -j.
* Makefile.am (edit): Substitute for @mkdir_p@.
* config/ltmain.in (MKDIR_P): Take @mkdir_p@ value.
(mkdir): Removed.
(func_mkdir_p): New function to use $MKDIR_P. Factor out all
previous mkdir calls to use this function.
(RM, MV): Declared as in libtoolize.in. Changed all callers.
* libtoolize.in (MKDIR_P): Take @mkdir_p@ value from automake.
(func_mkdir_p): Use it, similarly to new config/ltmain.in.
* tests/defs: Synchronize boiler plate code with ltmain.in.
Adjust all callers.
Add missing copyright preamble.
* tests/demo-static.test: Add missing copyright preamble.
Reported by Daniel Reed <n@ml.org>
from the build tree that were left behind by previous versions of
libtool.
($top_srcdir)/stamp-vcl: Since this rule is already called on
every invocation of make, hook clean-ltmain-sh in here too.
Suggested by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
instructions, and provide additional useful info alongside the bug
reporting address in --help output:
* Makefile.am (edit): Substitute $host_triplet.
* libtoolize.in: Output useful debug info with --help.
* config/ltmain.in: Ditto.
* README: Rewritten. Added copyright info.
* README-alpha: Rewritten. Added copyright info.
* HACKING: New file, partly taken from old README-alpha.
distributed files (m4/ltversion.m4 and config/ltmain.in) in the
readonly source tree:
* Makefile.am (stamp-vcl): Keep only one copy of stamp-vcl; in
$(top_srcdir), so that an up-to-date version is rolled into the
dist tarball even from a VPATH build.
($(top_srcdir)/config/ltmain.sh): Don't depend on Makefile,
otherwise ltmain.sh needs to be rebuilt after every config.status
run, and then configure needs to be rebuilt, and it all goes
horribly wrong :-/ Unfortunately, we can't depend on Makefile.am
either, because that is a circular dependency. The downside of
this change is that it is now possible to edit Makefile.am to
change the way ltmain.sh is generated, and the dependency
information can't tell that ltmain.sh needs regenerating.
Makefile.
(timestamp): Factor out timestamp setting and edit it based on the
version number, so that it is empty for release versions.
($(top_srcdir)/config/ltmain.sh): Use it.
(libtoolize): Ditto.
`cd $(top_srcdir)' for this rule, we can't mv ltversion.tmp to the
relative $(top_srcdir) again! Also, run $(MKSTAMP) before changing
directories, or it won't be found.
($(top_srcdir)/config/ltmain.sh): Ditto.
(EXTRA_DIST): We should distribute ltversion.m4 too.
required to write this changeset -- especially that ltmain.sh is
the same on any machine for a given release, which I hadn't
noticed for some bizarre reason: It turns out that generating
distributed files from configure causes no end of hassle, as
evidenced by the many patches I've generated over the last few
days to try and get the dist and distcheck make rules to work.
Instead of all that hair, we now simply generate our distributed
files (now including ltmain.sh) with make rules -- and since
automake creates make variables for all AC_SUBSTs, that is really
easy. The code looks a lot more like automake and autoconf
Makefile.ams now, and doesn't have all the rough edges the earlier
hacky solution suffered from. We still generate libtool from
config.status, but that is not a distributed file, and doesn't
break the golden rule. Besides, there is way more going on there
than a bunch of substitutions:
* Makefile.am (edit): New common sed substitutions for files now
generated by make instead of config.status.
(CLEANFILES): Clean new tmp files.
(EXTRA_DIST): Add ltmain.sh.
(vcl-tmp): Reinstated.
(m4/ltversion.m4, config/ltmain.sh): New rules. Generate from
here instead of config.status.
(libtoolize): Ditto.
(libtool): Call config.status to regenerate if necessary.
(dist-hook): Removed.
* config/ltmain.in: Moved here from top_srcdir.
* README-alpha: Update instructions to check AS_SHELL_SANITIZE is
up to date.
* bootstrap: Rewritten. Generate m4/ltversion.m4 and
config/ltmain.sh because configure depends on them.
* configure.ac (AC_CONFIG_SRCDIR): Use libtoolize.in now that
ltmain.in has moved.
(AC_CONFIG_FILES): Don't generate distributed files,
config/ltmain.sh and libtoolize from config.status. We have make
rules to do that now.
help `make distcheck'; not only do we have to make a copy of
ltmain.sh available in the source tree, but we have to be really
careful about permission bit twiddling when we copy it across into
the possible read-only $(top_srcdir)/config directory!
quite rightly for every project except libtool, that there will be
an ltmain.sh in the source tree.
(EXTRA_DIST): As do the dist rules it generates.
(dist-hook): Even though we definitely don't want to distribute
our local ltmain.sh.
target forced a rebuild of stamp-vcl in the build tree (and
hence regeneration of m4/ltversion.m4, thus an automake driven
rebootstrap that doesn't know about $fakes) requiring a fresh
./bootstrap after every cvs/tla update:
* Makefile.am (vcl.tmp): Removed.
(stamp-vcl): Adopt former vcl.tmp target rules.
pull an old installed libtool.m4 as well as the bootstrap
m4/libtool.m4 if an AC_DEFUN was removed), and we have
lt~obsolete.m4 to work around it in the mean time. libtoolize
can install macro files from $prefix/share/aclocal perfectly well
without us needing to move to a whole other directory:
* Makefile.am (pkgmacro_DATA): Renamed to aclocal_DATA, so m4
files are installed to $prefix/share/aclocal again.
(install-data-local): Don't remove just installed macros!
* libtoolize.in (pkgmacrodir): Renamed to aclocaldir.
(func_copy_some_files): New function factored out of...
(func_copy_all_files): ...here. Adjust to use func_copy_some_files.
(re_pkgaux_files): Renamed to glob_pkgaux_files, since it is not
a regular expression.
(re_pkgmagro_files): Replaced with...
(pkgmacro_files): ...a colon delimited list of libtool installed
m4 files from aclocaldir.
(Main): Copy macro files from aclocaldir again.
* NEWS: Updated.
* libltdl/argz_.h: ...to here, so as not to shadow system
argz.h when we `#include <argz.h>' for example.
#include stdlib.h and sys/types.h to ensure we get a size_t
definition.
* libltdl/argz.c (HAVE_CONFIG_H): Set it up how ltdl likes it when
used by another client.
* m4/argz.m4: New file.
(gl_FUNC_ARGZ): Try to find an error_t definition, and a system
argz.h.
* m4/ltdl.m4: Use it.
(AC_LTDL_FUNC_ARGZ): Removed.
* libltdl/lt__glibc.h: #include <argz.h> to pick up either the
system argz.h or our libltdl/argz.h if necessary.
* libltdl/Makefile.am (libltdl_la_SOURCES): Move argz.h from
here...
(ltdldata_DATA): ...here. Along with argz.c.
(argz.h): Generate from argz_.h if the system file is missing.
Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
removing initial '1.' from the revision, replace @MACRO_SERIAL@
with this new variable.
* m4/ltversion.in: Use @MACRO_SERIAL@ for the serial number
as some shells don't like a '.' when using test.
maintainers only out of the Makefile we distribute and into one
that we only need keep in CVS.
* README-alpha: Add -fMakefile.maint to the instructions where
needed.
are being used.
* Makefile.am (m4/ltversion.m4): New rule to create it from
m4/ltversion.in.
(nodist_pkgmacro_DATA): Add m4/ltversion.m4.
(EXTRA_DIST): Add m4/ltversion.in.
* m4/libtool.m4 (AC_LIBTOOL_SETUP): AC_REQUIRE LTVERSION_VERSION
from ltversion.m4.
* bootstrap: Call the Makefile.am to create an initial
m4/ltversion.m4.
* ltmain.in: Diagnose version mismatches of various flavours.
* TODO: Remove mismatch item.
* NEWS: Updated.
* configure.ac (CONFIG_STATUS_DEPENDENCIES): This substitution is
how automake-1.8 now informs all Makefiles when config.status
needs to be rebuilt.
Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>
and config.sub executable after they are installed as _DATA.
We can't use _SCRIPTS because the various program name
transforms may be applied to them.
(dist_pkgdata_DATA): List config.guess and config.sub here
(pkgdata_SCRIPTS): instead of here.
the 1.5.2 release.
* Makefile.am (cvs-dist): Because we check whether ChangeLog
has been committed, this rule can't be run with uncommitted
source so we can't run 'commit' and don't need to run
'make dist' a second time. Fix CVS tag as it should be
"release-X" not "Release-X".
(cvs_commit): New rule for the cvs-release chain that runs
'commit'
(cvs-release): Depend on cvs-commit, depend on deltas instead of
cvs-diff and xdelta.
(cvs-diff): Removed, replaced with delta-diff.
(delta-diff): Unpack and diff the old and new tarballs rather
than using CVS, so we get a genuinely complete diff.
(xdelta): Removed, replaced with delta-xdelta.
(got-xdelta): New rule for improved reading.
(delta-xdiff): Copied and cleaned up version of old xdelta rule.
(deltas): Depends on delta-diff and delta-xdelta (make deltas).
(cvs-news): Don't depend on timestamps, cvs-dist itself does now.
(prev-tarball): This is the only place we need a LASTRELEASE check
so copy the code here and remove the CHECK_RELEASE variable.
(new-tarball): Check there's a new tarball (did cvs-dist work?)
(FETCHFILES): Remove obsolete libltdl mentions.
* README-alpha: Update CVS instructions as everything's changed
on Savannah.
(Release procedure): Update NEWS and ChangeLog after changing
the version number (both times); Run 'make fetch' after running
'configure' (difficult to do it beforehand); Require 'commit'
before 'make cvs-dist' as that checks ChangeLog is committed;
'make deltas' instead of 'cvs-diff' and 'xdelta', pass LASTRELEASE
to make instead of OLDVERSION (and it's mandatory); Clean up
uploading paragraph; Clearer announcement sending instruction;
Removed ftp-upload@gnu.org mail as that's not necessary now;
Make web page updating instructions a bit clearer; Add an instruction
to update the manual for non-alphas.
(Alpha release note template): Add a Subject; update CVS instructions.
(Full release note template): Add a Subject; update CVS instructions.
* configure.ac: Add dist-bzip2 to AM_INIT_AUTOMAKE as we talk
about bz2 files in our release announcements; remove old reference
to OLDVERSION.
which were copying Makefile.in from the libtool tree into the
package running libtoolize. Now we explicitly list the files to
copy to force the package to generate its own Makefile.in:
* libltdl/Makefile.am (libltdl_la_SOURCES, libltdlc_la_SOURCES):
Add ltdl.h.
(ltdldatadir): New variable for installation directory of
libtoolize --ltdl files.
(ltdldata_DATA): Tell automake what files to copy there at install
time (and remove at unistall time!).
(local-install-files): Removed. This hack is not required
anymore, the automake generated install rules are much more
advanced than this.
* Makefile.am (install-data-hook, uninstall-local): Removed.
Libltdl files for libtoolize are installed by their own Makefile
now.
macro definitions which stop the contents of an installed
libtool.m4 ending up in our aclocal.m4 when we bootstrap.
* Makefile.am (pkgmacro_DATA): Note that we don't need to add
lt~obsolete.m4 to this list.
* m4/libtool.m4 (_LT_COPYING): Factor out copyright message so it
(EXTRA_DIST): Remove m4 macro files; they are automatically
added by automake.
(pkgmacrodir): Where to install libtool macro files.
(pkgmacro_DATA): List installable libtool macro files.
(install-data-local): Remove previous versions of ltdl.m4 and
libtool.m4 from their old location.
* libtoolize.in: Use new pkgmacrodir installed macros when
libtoolizing a project. Treat libtool.m4 and ltdl.m4 specially,
and func_serial_update() any other files from pkgmacrodir.
(pkgmacrodir): Where to find installed libtool macro files.
(aclocaldir): Removed.
(func_copy_all_files): Add an optional callback parameter to
control how files are copied. If the callback is passed, don't
tell it whether it can copy or not.
(func_serial): Exchange parameters and make macro_regex optional,
so that this function can be used to extract serial numbers from
files with the traditional /^# serial [1-9][0-9]*$/ syntax.
Changed all callers.
(func_serial_update): Make macro_regex optional last parameter, so
that this function can be used as a callback for
func_copy_all_files(). Changed all callers.
* m4/ltsugar.m4: Add a serial number.
libtool via config.status. The old way involved manually
synchronising disparate bits of shell code in several macros, to
quote a copy of a shell variable, put that in config.status, maybe
add it to some quotation loops to prevent early expansion, and
then add a block to _LT_CONFIG_COMMANDS to bring it into the
libtool script. The new way is to mark shell variables for
propogation using _LT_DECL for language independent variables, or
_LT_TAGDECL for those that need to be propogated in several
language flavours. The marking can be done in the macro that
probes the variables, and this new m4 machinery takes care of
synchronising all the other bits of code at autoconf time:
* m4/ltsugar.m4: New file. Macros that are useful outside the
context of libtool. Initially, contains some generalised list
management macros, and the scaffolding for dictionary type data
storage and retrieval.
* Makefile.am (aclocal_macros): Install ltsugar.m4.
* m4/libtool.m4 (_LT_DECL): Mark a shell variable for export to
the libtool script, along with a comment, and hints for quoting
and renaming.
(_LT_TAGDECL): Similarly mark a tagged shell variable for export
in each tag.
(lt_decl_tag_varnames, lt_decl_quote_varnames)
(lt_decl_dquote_varnames, lt_decl_varnames_tagged)
(lt_decl_all_varnames): New utility macros for managing lists of
shell variable names from _LT_DECL and _LT_TAGDECL.
(_LT_CONFIG_STATUS_DECLARATIONS, _LT_CONFIG_STATUS_DECLARE):
Expand to correctly quoted variable declarations in config.status
from all marked shell variables.
(_LT_LIBTOOL_DECLARE): Expand to commented and quoted variable
declaration for libtool tag section.
(_LT_LIBTOOL_CONFIG_VARS, _LT_LIBTOOL_TAG_VARS): Pass all marked
variables to _LT_LIBTOOL_DECLARE.
(_LT_CONFIG_COMMANDS): Use _LT_CONFIG_STATUS_DECLARATIONS and
friends to generate all the variable passing shell code for
config.status, to get marked variables from libtool.m4 into
libtool itself eventually.
(AC_LIBTOOL_CONFIG): Generate marked variable code for libtool tag
configuration. Changed all client macros to mark variables
suitably rather than the hand pasting that was necessary
previously.
(AC_PROG_SED): Renamed from LT_AC_PROG_SED.
(LT_AC_PROG_SED): Wrap AC_PROG_SED, and mark shell variables for
propogation to the libtool script.
