subdir-objects builds. This marks the beginning of a move to an
Autotest driven test framework, which will eventually allow us to
trim away many of the generated files in the current test demo
subdirectories:
* configure.ac (AC_CONFIG_TESTDIR): Re-enable commented out
Autotest macros.
(AUTOTEST, M4SH): Use --language long hand.
* bootstrap: Generate tests/testsuite, and by implication
tests/package.m4.
* Makefile.am (edit): Add substitutions needed to generate
tests/package.m4 from bootstrap.
(check-recursive): Add tests/testsuite.
(TESTSUITE): The new Autotest testsuite target.
(TESTSUITE_AT): The Autotest sources.
(EXTRA_DIST): Distribute the generated testsuite and sources.
(tests/package.m4): Use $(edit) to propagate package metadata to
the new tests.
(tests/testsuite): Build the testsuite.
(tests/atconfig): How to regenerate the file.
(check-local): Hook Autotest into `make check'.
(installcheck-local): Run the testsuite on the installed tree.
(clean-local): Tidy our file droppings.
* tests/Makefile.am: Remove bitrotted code from Autotest
experiments in Autoconf 2.52 era. Updated the rest and moved into
Makefile.am.
* tests/testsuite.at: New container for Autotest test groups.
* tests/am-subdir.at: New test group for compatibility with
Automake's subdir-objects builds. Currently holds two tests, one
for a C project and another similar project in C++.
* TODO: Add an entry to remind us that these new tests expose a
bug in libtool.
* NEWS: Updated.
with $lt_ECHO, or we always get a libtool with ECHO=echo, rather
than testing for a mechanism that quotes properly.
* NEWS: Updated.
* config/ltmain.m4sh: Need to include getopt.m4sh earlier so that
progpath is set before it is called to --no-reexec.
* NEWS: Updated.
Without this change, the distributed libtool tarball has a
dependency on autom4te. There was some inconsistency in the
filenames: now we have foo.m4sh -> m4sh -> foo.in -> configure
-> foo[.sh]. Bootstrap runs the m4sh steps and the resulting .in
files are distributed:
* tests/Makefile.am (EXTRA_DIST): Distribute defs.m4sh.
* Makefile.am (EXTRA_DIST): Distribute libtoolize.m4sh.
(libtoolize.in, libtoolize): Split into bootstrap and runtime
stages.
($(top_srcdir)/tests/defs.in, $(top_srcdir)/tests/defs): Ditto.
($(top_srcdir)/config/ltmain.sh): Swap ltmain.m4sh and ltmain.in
names.
* bootstrap: Make libtoolize.in and tests/defs.in.
* NEWS: Updated.
* m4/libtool.m4: Correct obvious spelling errors in remarks.
(_LT_ENABLE_LOCK): Make s390x-ibm-tpf hosts adopt elf64_s390
conventions.
(_LT_SYS_DYNAMIC_LINKER): Set defaults for s390x-ibm-tpf host.
(_LT_CHECK_MAGIC_METHOD): Skip all dependency checks for
s390x-ibm-tpf hosts.
(_LT_LINKER_SHLIBS): Make s390x-ibm-tpf hosts adopt GNU/Linux OS
attributes.
* NEWS: Updated.
a .exp file for an executable, also create a .def file, and add
that file to the link command via SYMFILES. This causes binutils
to generate an .edata section, and allows self dlopening to work.
* NEWS: Updated.
below is horrendously broken since it makes the installed libtool
try to run the mkinstalldirs or install-sh helper scripts. This
patch fixes the `make -j' mkdir race condition internally:
* libtoolize.in (func_mkdir_p): New slice and dice algorithm
to build the directory tree one dir at a time, ignoring errors
until the end incase they are transient due to a concurrent
identical mkdir.
* tests/defs (func_mkdir_p): Ditto.
* config/ltmain.in (func_mkdir_p): Ditto, except that ltmain.in
uses $echo rather than $ECHO, and uses $show and $run to interact
correctly with the command line.
* configure.ac (AM_INIT_AUTOMAKE): 1.8 is sufficient again.
* Makefile.am (edit): Don't substitute automake's $(mkdir_p).
* NEWS: Updated.
already exists warnings" for .lib directory. Build on automake
wisdom to support make -j builds where a suitable mkdir is
available:
* configure.ac (AM_INIT_AUTOMAKE): Require 1.9, which goes to some
trouble to find a $(mkdir_p) that doesn't interfere with make -j.
* Makefile.am (edit): Substitute for @mkdir_p@.
* config/ltmain.in (MKDIR_P): Take @mkdir_p@ value.
(mkdir): Removed.
(func_mkdir_p): New function to use $MKDIR_P. Factor out all
previous mkdir calls to use this function.
(RM, MV): Declared as in libtoolize.in. Changed all callers.
* libtoolize.in (MKDIR_P): Take @mkdir_p@ value from automake.
(func_mkdir_p): Use it, similarly to new config/ltmain.in.
* tests/defs: Synchronize boiler plate code with ltmain.in.
Adjust all callers.
Add missing copyright preamble.
* tests/demo-static.test: Add missing copyright preamble.
Reported by Daniel Reed <n@ml.org>
upstream. Mostly comments, formal item boxing, a sort function,
and const madness reduction.
(slist_new): Removed.
(slist_box, slist_unbox, slist_sort): New.
(SListCompare, SListCallback): Swapped!
(slist_remove, slist_find): Change order of parameters for
orthogonality with slist_foreach. Changed all callers.
* libltdl/lt_dlloader.c (loader_cmp): Renamed to...
(loader_callback): ...this. Return boxed item.
(lt_dlloader_remove): Adjust to new loader_callback semantics;
unbox each removed item before returning.
Remove unused variable.
Remove const from name parameter, since the slist API cannot
guarantee userdata const-ancy for its callback functions.
(lt_dlloader_find): Adjust to new loader_callback semantics; need
to return the contents of the boxed item.
Remove const from name parameter, since the slist API cannot
guarantee userdata const-ancy for its callback functions.
* libltdl/lt_dlloader.h (lt_dlloader_find, lt_dlloader_remove):
Adjust to new constless footprint.
* libltdl/ltdl.c (ltdl_exit): The global `loaders' list is changed
variable `loader' is invalidated. Since some loaders may be
resident modules that cannot be unloaded (though we have none
yet), we must save each `next' address before calling
`lt_dlloader_remove'.
* NEWS: Updated.
* THANKS: Added Ralf.
compatible. Instead, revert to the old way of doing things with
an array of symbol name vs. address, and adding the originator as
the first symbol but with a NULL address:
* config/ltmain.in (func_extract_dlsyms): Store originator as a
NULL address symbol.
* libltdl/ltdl.h (lt_dlsymbol): Removed.
(lt_dlsymlist): Remove originator field.
(LTDL_SET_PRELOADED_SYMBOLS): Adjust.
* libltdl/loaders/preopen.c (vm_open, lt_dlpreload_open): Adjust
for new types.
(vm_sym): Skip the new originator symbol when scanning symbol
names.
* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Adjust preloaded symbols
test file to match.
* NEWS: Updated.
value of this function is often passed to free, don't declare it
`const'. Responsibility for this memory is given back to the
caller on return.
* libltdl/lt_dlloader.h (lt_dlloader_remove): Ditto.
* libltdl/ltdl.c (lt_dlexit): Adjust.
* NEWS: Updated.
dependency libraries from dlpreopened modules to libraries:
* config/ltmain.in: Support new -weak link mode option. Adjust
help message.
* libltdl/Makefile.am (libltdlc_la_LDFLAGS): Use it.
* doc/libtool.texi (Linking with dlopened modules): Document it.
(Link mode): Mention -weak.
* NEWS: Updated.
lt__handle to better reflect the naming scheme.
* libltdl/ltdl.h (lt_dlhandle): Be truly opaque with a void *.
* libltdl/lt_dlloader.c (lt_dlloader_remove): Party to
lt__private.h, so use internal lt__handle instead of opaque
lt_dlhandle.
* libltdl/ltdl.c (LT_DLGET_FLAG, LT_DLSET_FLAG): Add a cast to
internal lt__handle type.
(try_dlopen, tryall_dlopen, load_deplibs, unload_deplibs): Ditto.
(lt_dlexit, lt_dlclose, lt_dlsym): Use lt__handle to iterate
throught the handle list.
(try_dlopen): Use lt__zalloc instead of MALLOC and memset.
* libltdl/ltdl.h (lt_dlcaller_id): Be truly opaque with a void *.
(lt_dlhandle_interface): New callback type for filtering handles
according to the interface they present.
* libltdl/ltdl.c (lt_dlcaller_register): Take an id and an
interface check callback, and generate a caller_id.
(iterator): New static variable for the use of...
(lt_dlhandle_first): New function. Set the iterator for
subsequent calls to lt_dlhandle_next.
(lt_dlhandle_next): Either work as before when iterator is unset,
or else skip handles that fail the interface check in iterator set
by lt_dlhandle_first.
* libltdl/ltdl.h (lt_dlhandle_first): Declaration.
* doc/libtool.texi (User defined module data): Document the new
APIs.
* NEWS: Updated.
operation of libtool (neither would work alone). First, there is
a new feature that allows libraries to preopen modules. This
entails a backwards incompatible change to the libltdl API for
separating out the preloaded symbol lists by owner. Second, in
the tradition of "eating our own dogfood", libltdl now preloads
its own dlloaders. The internal API for dlloaders has also had to
change in a backwards incompatible way in support of the new
library preloading feature. If you don't use preloaded libraries,
you needn't change your project sources, though you will need to
recompile against the new libltdl. The API changes are mostly
confined to dlloaders, so you probably needn't worry about those
(unless you have written a custom loader that you want libltdl to
use):
* configure.ac (AC_CONFIG_FILES): Add libltdl/loaders/Makefile.
* libltdl/configure.ac (AC_CONFIG_FILES): Add loaders/Makefile.
* libltdl/loaders: New directory for module loaders, to simplify
Makefile rules, and to give the loaders themselves names that are
unique in the first few characters.
* libtoolize.in (func_copy_all_files): Copy recursively to pick up
the loaders directory contents.
* libltdl/loaders/Makefile.am: New file. Move module building
rules to here...
* libltdl/Makefile.am: ...from here.
(VERSION_INFO): Bumped version info to signify interface changes.
(libltdl_la_CPPFLAGS, libltdlc_la_CPPFLAGS): Set LTDLOPEN
appropriately for each library.
* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
libltdl/loader-loadlibrary.c libltdl/loader-preopen.c,
libltdl/loader-shl_load.c: Moved from here...
* libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
libltdl/loaders/loadlibrary.c libltdl/loaders/preopen.c,
libltdl/loaders/shl_load.c: ...to here.
(get_vtable): New entry function for each.
* libltdl/loaders/preopen.c (lt_dlsymlists_t): Replaced by...
(symlist_chain): ...a new structure which maps lists of preloaded
symbols from the object that loads them.
(lt_dlpreload_open): New function to automatically open all
preloaded modules belonging to a named object (ORIGINATOR).
* libltdl/lt__alloc.c (lt__zalloc): New function to return a block
of zeroed out new memory.
* libltdl/lt__alloc.h (lt__zalloc): Prototype it.
* libltdl/lt__private.h (lt__alloc_die_callback): Add missing
prototype.
(lt__error_strings): Make this opaque to callers.
* libltdl/lt_error.c (lt__error_strings): Move the implementation
to here.
* libltdl/lt_dlloader.h (lt_user_dlloader): Add extra fields to
make originator focused preloading possible. *BREAKS BACKWARDS
COMPATIBILITY*
(lt_dlloader_add): Take advantage of new fields to simplify
paramater list.
* libltdl/lt_system.h (LT_STR): New ANSI stringification macro.
(LT_CONC): Fix it to work from within macros.
* libltdl/ltdl.c (loader_init, loader_init_callback): Simplify
dlloader loading.
(get_vtable, preloaded_symbols): Point these at the preopen.c
symbols to bootstrap the loader chain.
(lt_dlinit): Load the preopen dlloader manually, and then use it
to load any other preloaded dlloaders.
(lt_dlloader_add): Simplify parameter list. Populate new
fields. Chain new loaders according to priority field.
* libltdl/ltdl.h (lt_dlsymlist): Add a new originator field.
(lt_dlpreload_callback_func): Type of a callback for automatic
lt_dlpreload_open loading.
(LTDL_SET_PRELOADED_SYMBOLS): Adjust to hook into preloaded
symbols from the "@PROGRAM@" originator.
* tests/demo/dlmain.c (main): Use mangled preloaded_symbols symbol.
* tests/pdemo/longer_file_name_dlmain.c (main): Ditto.
* ltmain.in: Don't spew spurious warnings when dlopening and
dlpreopening modules.
(func_generate_dlsyms): Factored out from multiple copies in the
rest of the code. Generate originator keyed symbol lists.
(func_extract_archives): Also factored. Extract the contents of
convenience archives for linking with dependent libraries when
--whole-archive is not available.
[darwin]: Don't try to link $old_library unless it exists, and
$lib is a bundle.
* m4/ltdl.m4 (AC_LTDL_DLLIB): Check for all possible dynamic
loading libraries/apis rather that stopping when an acceptable one
is discovered.
(LT_DLLOADERS): New variable for holding dlloaders that can be
preloaded.
* doc/libtool.texi: Document interface changes.
* NEWS: Updated.
* libltdl/ltdl.c (lt_dlhandle_struct): ...from here. Changed all
callers.
* libltdl/loader-loadlibrary.c (sys_wll_open): Use new inteface to
scan loaded handle->info.module fields for previously loaded
modules.
* doc/libtool.texi (User defined module data): Document changes to
the interface.
* NEWS: Updated.
Reported by Chuck Wilson <cwilson@ece.gatech.edu>
pull an old installed libtool.m4 as well as the bootstrap
m4/libtool.m4 if an AC_DEFUN was removed), and we have
lt~obsolete.m4 to work around it in the mean time. libtoolize
can install macro files from $prefix/share/aclocal perfectly well
without us needing to move to a whole other directory:
* Makefile.am (pkgmacro_DATA): Renamed to aclocal_DATA, so m4
files are installed to $prefix/share/aclocal again.
(install-data-local): Don't remove just installed macros!
* libtoolize.in (pkgmacrodir): Renamed to aclocaldir.
(func_copy_some_files): New function factored out of...
(func_copy_all_files): ...here. Adjust to use func_copy_some_files.
(re_pkgaux_files): Renamed to glob_pkgaux_files, since it is not
a regular expression.
(re_pkgmagro_files): Replaced with...
(pkgmacro_files): ...a colon delimited list of libtool installed
m4 files from aclocaldir.
(Main): Copy macro files from aclocaldir again.
* NEWS: Updated.
* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Use it. Set
ldqnx.so linker type.
(AC_DEPLIBS_CHECK_METHOD): QNX6 uses GNU C++, with deplib
checking, so use pass_all.
(AC_LIBTOOL_PROG_COMPILER_PIC): Use -shared for QNX.
(_LT_LANG_CXX_CONFIG): QNX can make shared libraries.
* m4/ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): QNX opens deplibs on
dlopen.
* NEWS: Updated.
Applications should assume that the native dlopen is NOT
thread-safe, and take care of locking themselves. All application
calls into libltdl should thus be protected by the caller.
* libltdl/lt_mutex.c, libltdl/lt_mutex.h: Removed.
* libltdl/Makefile.am (pkginclude_HEADERS): Removed lt_mutex.h.
(libltdl_la_SOURCES): Removed lt_mutex.c and lt_mutex.h.
* libltdl/ltdl.h: Don't include lt_mutex.h.
* libltdl/lt__private.h (LT__MUTEX_GETERROR, LT__MUTEX_SETERROR)
(LT__MUTEX_SETERRORSTR): Renamed to...
(LT__GETERROR, LT__SETERROR, LT__SETERRORSTR): ...this. Changed
all callers.
(LT__MUTEX_LOCK, LT__MUTEX_UNLOCK, lt_dlmutex_lock)
(lt_dlmutex_unlock, lt_dlmutex_seterror, lt_dlmutex_geterror):
Removed. Changed all callers.
* doc/libtool.texi (Thread Saftey in libltdl):
* NEWS: Updated.
newer adds predep_objects and postdep_objects itself, so don't
duplicate them in $archive_cmds and $archive_expsym_cmds.
* NEWS: Updated.
Reported by Roberto Bagnare <bagnara@cs.unipr.it>
There was no clean separation of abstraction layers in libltdl.
The first step in fixing this is to factor out the memory
management abstraction, making a start on removing promiscuity
from the underlying portability layer:
* doc/libtool.texi (Libltdl interface): Remove lt_dlmalloc,
lt_dlrealloc and lt_dlfree references. The memory management
layer used by libltdl is now private.
* libltdl/lt_system.h: New installed header for system portability
abstraction.
* libltdl/ltdl.h: Use it.
* libltdl/lt__alloc.c, libltdl/lt__alloc.h: New module above
system portability layer to abstract ltdl's memory management.
* libltdl/ltdl.c: Use lt__alloc.h.
(closedir): Use free.
(opendir): Use malloc/free.
(lt__xalloc_die_callback): Report memory failures through
lt_dlerror.
(lt_dlinit): Use it to initialise memory management.
(LT_DLMALLOC, LT_DLREALLOC, LT_DLFREE, LT_EMALLOC, LT_EREALLOC)
(rpl_strdup, rpl_realloc, lt_estrdup, lt_emalloc, lt_erealloc):
Removed in favour of...
(lt__strdup, lt__memdup, MALLOC, REALLOC, FREE): ...these calls
from libltdl/lt__alloc.h. Changed all callers.
(rpl_argz_append, rpl_argz_create_sep, rpl_argz_insert): As part
of the portability layer, these functions no longer use libltdl
memory management API.
(free_vars): Factored out.
(LT_DLMEM_REASSIGN): While redoing memory handling, renamed...
* libltdl/lt__alloc.h (MEMREASSIGN): ...to this.
* libltdl/Makefile.am (AUTOMAKE_OPTIONS): Let automake track
dependencies automatically.
(pkgincludedir): Override from parent package's setting.
(pkginclude_HEADERS): Install lt_system.h.
(libltdl_la_SOURCES): Add new files.
* NEWS: Updated.
Reported by Dalibor Topic <robilad@kaffe.org>
`configure.ac' to allow users to better control the list of
supported languages. Three LT_INIT options 'no-lang', 'all-lang'
and 'auto-lang' (the default) control the initial list and others
may be added with LT_LANG.
* m4/libtool.m4 (_LT_CONFIG): Renamed AC_LIBTOOL_CONFIG to _LT_CONFIG
which is more consistent with our own namespace and gets us further out
of Autoconf's.
(_LT_LIBTOOL_TAGS): Output available_tags variable based entirely
on the value of _LT_TAGS.
(_LT_COPYING): Call _LT_LIBTOOL_TAGS to output available tags,
always append tag configuration if the tag is available.
(LT_LANG): New macro to enable support for a language that accepts
tag names (eg. "CXX") or human language names (eg. "C++").
(_LT_LANG): Internal support macro for above that appends the
tag to _LT_TAGS and calls the appropriate config macro.
(LT_INIT): Ensure that LT_LANG is not called before LT_INIT.
(AC_LIBTOOL_TAGS): Removed, call LT_LANG for each language now.
(_LT_AC_TAG_CHECK): Removed, _LT_LANG handles duplicate calls.
(_LT_LANG_DEFAULT_CONFIG): Macro to set initial language support
based on options passed to LT_INIT.
(_LT_SETUP): Call _LT_LANG_DEFAULT_CONFIG.
(_LT_AC_TAG_CONFIG): Removed, handled by _LT_LANG_DEFAULT_CONFIG.
(_LT_AC_LANG_CXX, _LT_AC_LANG_F77, _LT_AC_LANG_GCJ): Removed,
automatic language support inclusion now handled by
_LT_LANG_DEFAULT_CONFIG.
(AC_LIBTOOL_CXX): Obsolete macro, update to LT_LANG(C++).
(AC_LIBTOOL_F77): Obsolete macro, update to LT_LANG(Fortran 77).
(AC_LIBTOOL_GCJ): Obsolete macro, update to LT_LANG(Java).
(AC_LIBTOOL_LANG_C_CONFIG_: Removed.
(_LT_AC_LANG_C_CONFIG): Renamed to _LT_LANG_C_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(_LT_SETUP): Replace call to AC_LIBTOOL_LANG_C_CONFIG with call to
new _LT_LANG_C_CONFIG macro.
(AC_LIBTOOL_LANG_CXX_CONFIG): Removed.
(_LT_AC_LANG_CXX_CONFIG): Renamed to _LT_LANG_CXX_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(AC_LIBTOOL_LANG_F77_CONFIG): Removed.
(_LT_AC_LANG_F77_CONFIG): Renamed to _LT_LANG_F77_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(AC_LIBTOOL_LANG_GCJ_CONFIG): Removed.
(_LT_AC_LANG_GCJ_CONFIG): Renamed to _LT_LANG_GCJ_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(AC_LIBTOOL_LANG_RC_CONFIG): Removed.
(_LT_AC_LANG_RC_CONFIG): Renamed to _LT_LANG_RC_CONFIG, call
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
(LT_AC_PROG_GCJ): Renamed to LT_PROG_GCJ.
(LT_AC_PROG_RC): Renamed to LT_PROG_RC.
* m4/ltoptions.m4: Define new 'no-lang', 'auto-lang' and 'all-lang'
options which set the default for _LT_LANG_DEFAULT_CONFIG.
* m4/lt~obsolete.m4: Removed AC_LIBTOOL_CONFIG, _LT_AC_LANG_C_CONFIG,
_LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG; all of which are no
long referenced in any way.
* configure.ac: Enable all languages.
* tests/cdemo/configure.ac, tests/demo/configure,ac,
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
tests/mdemo/configure.ac, tests/pdemo/configure,ac,
tests/tagdemo/configure.ac: Remove calls to AC_LIBTOOL_TAGS,
the default 'auto-lang' mode now does the right thing.
* doc/libtool.texi (The LT_INIT macro): Add documentation for
new LT_INIT options and the LT_LANG macro, replacing the old
documentation of AC_LIBTOOL_TAGS which is no more.
* NEWS: Updated.
`configure.ac' to be more like AC_INIT and accept a space
delimited list of options. Instead of calling `AC_LIBTOOL_DLOPEN;
AC_PROG_LIBTOOL', we now recommend `LT_INIT([dlopen])':
* m4/libtool.m4 (AC_PROG_LIBTOOL, _AC_PROG_LIBTOOL)
(AC_LIBTOOL_SETUP): Removed. Added AU_DEFUNs.
(LT_INIT): Replace with an Autoconf like interface which accepts a
version number as a minimum required libtool release at configure
time.
* m4/ltoptions.m4: New file inspired by automake/m4/amoptions.m4,
which additionally flags an error if the configuring libtool
macros are not new enough according to LT_INIT.
(LT_OPTION_DEFINE): New macro to declare option handlers.
(dlopen, win32-dll, shared, disable-shared, static)
(disable-static, fast-install, disable-fast-install, pic-only)
(no-pic): Newly LT_OPTION_DEFINEd option handlers that use...
(_LT_ENABLE_SHARED, _LT_ENABLE_STATIC, _LT_ENABLE_FAST_INSTALL)
(_LT_WITH_PIC, _LT_WIN32_DLL): New macros to handle
LT_LIBTOOL_INIT options...
* m4/libtool.m4 (AC_ENABLE_SHARED, AC_ENABLE_STATIC)
(AC_ENABLE_FAST_INSTALL, AC_LIBTOOL_DLOPEN, AC_LIBTOOL_WIN32_DLL):
...to replace these user interface macros, now defined as
AU_DEFUNs.
(AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_DISABLE_FAST_INSTALL):
Removed. No longer required with LT_INIT_LIBTOOL interface.
Added AU_DEFUNs.
(AM_ENABLE_SHARED, AM_DISABLE_SHARED, AM_ENABLE_STATIC)
(AM_DISABLE_STATIC): Changed AU_DEFUNs to match new interface.
(_LT_SETUP): Internal to LT_INIT, replaces AC_LIBTOOL_SETUP.
* m4/lt~obsolete.m4 (AC_LIBTOOL_SETUP, _AC_PROG_LIBTOOL)
(_LT_PROG_LTMAIN): More AC_DEFUNs that have been retracted.
* configure.ac: Use new interface.
* doc/libtool.texi: Document new interface.
* NEWS: Updated.
* m4/lt~obsolete.m4, tests/cdemo/configure.ac: Arghh. cvsapply just
went crazy and committed a bunch of stuff that shouldn't have been
in the last changeset. The patch backs it all out.
are being used.
* Makefile.am (m4/ltversion.m4): New rule to create it from
m4/ltversion.in.
(nodist_pkgmacro_DATA): Add m4/ltversion.m4.
(EXTRA_DIST): Add m4/ltversion.in.
* m4/libtool.m4 (AC_LIBTOOL_SETUP): AC_REQUIRE LTVERSION_VERSION
from ltversion.m4.
* bootstrap: Call the Makefile.am to create an initial
m4/ltversion.m4.
* ltmain.in: Diagnose version mismatches of various flavours.
* TODO: Remove mismatch item.
* NEWS: Updated.
to prevent removal of matching files from the temporary
output directory.
(Debian Bug #221420)
* doc/libtool.texi: document the new option.
* NEWS: announce the new option.
and $finalize_deplibs for programs) when found on the command line
or in a .la file's dependency_libs (but don't place them there) so
they are honoured when linking both programs and libraries.
* Adjust ChangeLog dates to be when I committed, not when I posted
the patches.
* Adjust name/e-mail in ChangeLog to be the authors of the patches.
* Add missing NEWS entry for Owen's patch.
checkout by generating ltmain.sh, using that to create libtool,
and then adding the tags to that, all from config.status.
* configure.ac (AC_CONFIG_FILES): Make config/ltmain.sh, and copy
it to libltdl.
* Makefile.am ($(srcdir)/config/ltmain.sh): This file is now
created by config.status. Adjust this rule.
(libtoolize): Set CONFIG_COMMANDS to empty to prevent regenerating
the libtool script as a side effect of running this rule.
* libtool.m4: Bump serial number. Fix comment typos.
(_LT_CONFIG_LIBTOOL_INIT, _LT_CONFIG_LIBTOOL,
_LT_CONFIG_SAVE_COMMANDS, _LT_CONFIG_COMMANDS: New macros. They
don't work for some reason - the variable value quoting in the
init section is all wrong. Not used at the moment.
(AC_LIBTOOL_CONFIG): Generate libtool from config.status.
(_LT_AC_TAG_CONFIG): Add the tags in config.status.
(compiler_DEFAULT): Save the compiler value for the DEFAULT tag,
or it gets overwritten by the other macros.
(EOF): Globally replace with _LT_EOF to avoid namespace pollution.
* tests/demo/configure.ac (STATIC): Check $enable_static instead
of running ./libtool which doesn't exist yet.
(BINARY_HELLDL): Check $lt_cv_sys_global_symbol_pipe with case
instead of grepping ./libtool which doesn't exist yet.
* tests/pdemo/configure.ac (STATIC, BINARY_HELLDL): Ditto.
* doc/libtool.texi (AC_PROG_LIBTOOL): Add some notes about trying
to get config details from `libtool --config'.
* NEWS: Updated.
