Support filename-based shared library versioning on AIX with the
lib.so library filename extension, which is used with runtime
linking only. Runtime linking is enabled by the -brtl linker
flag for executables and the -G linker flag for Shared Objects.
The behaviour is similar to Linux/SVR4 DT_SONAME, hence the name
"aix-soname=svr4".
* Makefile.am (TESTS_ENVIRONMENT): Pass with_aix_soname value
via lt_cv_with_aix_soname into testsuite.
* configure.ac: AC_SUBST with_aix_soname for testsuite.
* libltdl/loaders/dlopen.c (vm_open): Use RTLD_MEMBER flag for
dlopen when the filename does specify an archive member between
"()". Otherways, retry with appending LT_SHARED_LIB_MEMBER when
loading fails without but archive file seems to exist.
* m4/libtool.m4 (dynamic_linker): Describe configured shared
library versioning variant according to with_aix_soname and
runtime linking.
(soname_spec, library_names_spec, shlibpath_overrides_runpath)
(postinstall_cmds, postuninstall_cmds, hardcode_direct)
(hardcode_direct_absolute, no_undefined_flag)
(allow_undefined_flag): Set according to with_aix_soname and
runtime linking configuration.
(export_symbols_cmds): Decorate symbols with the weak keyword.
(archive_expsym_cmds): Create both shared libraries according to
with_aix_soname and runtime linking configuration. Filter -brtl
linker flag from compiler_flags for shared libraries due to its
side effects.
(enable_static): Respect with_aix_soname for disabling as well.
* m4/ltdl.m4 (LT_SHARED_LIB_MEMBER): Define, set based on the
value of the shared_archive_member_spec libtool variable.
* m4/ltoptions.m4 (_LT_WITH_AIX_SONAME): New. Provides
commandline option --with-aix-soname=aix|svr4|both. Declares
$shared_archive_member_spec as libtool variable.
(_LT_SET_OPTIONS): Define LT_INIT options "aix-soname=aix",
"aix-soname=svr4", "aix-soname=both". Default is
"aix-soname=aix".
* doc/libtool.texi (LT_INIT): Document new options.
* tests/deplibs-ident.at: To define whether this test should
XFAIL, use hardcode_action, hardcode_direct,
hardcode_direct_absolute configuration settings instead of
platforms aix, bitrig, hppa-hpux, interix or openbsd.
* tests/versioning.at: When shared_archive_member_spec is defined
and LDFLAGS contain -brtl, we can run the versioning check.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* m4/ltdl.m4 (LT_FUNC_DLSYM_USCORE): Compile, load and get the
address of a symbol from a separate loadable module, rather than
assuming dlopen self works.
* NEWS: Update.
Reported by KO Myung-Hun
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* m4/ltdl.m4 (LT_LIB_DLLOAD): Save contents of LIBS before
calling AC_SEARCH_LIBS, which prepends to LIBS by default, and
restore afterwards. We set LIBADD_DLOPEN and LIBADD_SHL_LOAD
so that dynamic loader libraries can be added selectively only
where they are needed.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* build-aux/ltmain.in (func_mode_link) <*-os2*>: Set major and
versuffix.
* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) <*-os2*>: Set
version_type to windows. Add a version information to soname_spec.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
<*-os2*>: Set archive_expsym_cmds.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
On OS/2, if there are many DLLs whose prefix is the same and
very long, the resulting DLLs are overwritten. Provide a new
option to force a DLL name.
* build-aux/ltmain.in (func_mode_help): Add a description for
-os2dllname.
(func_mode_link): Add -os2dllname.
* doc/libtool.texi: Document it.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
To avoid clashes with gnulib argz module in ltdl client projects,
move ours into its own namespace.
* libltdl/argz_.h, libltdl/argz.c, m4/argz.m4: Move from here...
* libltdl/libltdl/lt__argz_.h, libltdl/lt__argz.c, m4/ltargz.m4:
...to here.
* Makefile.am, libltdl/libltdl/lt__glibc.h, libltdl/ltdl.mk,
libtoolize.in, m4/ltdl.m4: Adjust accordingly.
* tests/libtoolize.at, tests/ltdl-api.at, tests/nonrecursive.at,
tests/old-ltdl-iface.at: Adjust for different libtoolize output.
* libltdl/.gitignore: Adjust accordingly.
* NEWS: Update.
Reported by Pavel Raiskup
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* m4/libtool.m4 (_LT_LINKER_SHLIBS) <linux*>: Set archive_cmds and
ld_shlibs appropriately when using tcc.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (install-data-local): Depend on new
install-scripts-local, and move libtoolize install from here...
(install-scripts-local): ...to here.
Pass libtoolize destination through program transform expression.
(uninstall-hook): Likewise, prior to removal.
* NEWS: Update.
* THANKS: Update.
Reported by Václav Zeman
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
If you are not using automake, libtoolize would remove install-sh.
It needs the same treatment as config.guess and config.sub.
* libtoolize.in (func_require_seen_libtool): Remove install-sh
from $all_pkgaux_files, the list of files removed by
`libtoolize --force`.
* THANKS: Add Todd C. Miller.
* NEWS: Update.
Copyright-paperwork-exempt: Yes
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
It's been a year since the as_echo probes were removed in Autoconf,
so we can follow suit and remove our equivalent bs_echo probing
now. Retain $ECHO in case users need to override default printf
calls in museum piece environments.
* gl/build-aux/funclib.sh (ECHO): Default to 'printf %s\n'.
(bs_echo): Remove.
Adjust all bs_echo callers to use $ECHO instead.
* bootstrap: Regenerate.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
Resolves bug#13414. Problem reported by Erik van Pienbroek
and Martin Doucha.
build-aux/ltmain.in (func_mode_link): Factor out the test if a
given symbol file is a module-definition (.def) file into...
(func_dll_def_p): ...this function, which also improves the check.
m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
<cygwin, mingw, pw32, cegcc>: Similarly, factor out the test if
a given symbol file is a module-definition (.def) file into...
(_LT_DLL_DEF_P): ...this macro, which also improves the check.
tests/export-def.at: New test.
Makefile.am (TESTSUITE_AT): Add above test.
NEWS: Update.
THANKS: Update.
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG) [MSVC]
<archive_expsym_cmds>: When the symbol list isn't really a symbol list,
but instead a .def file, copy it to a file with .def extension so that
MSVC recognizes it as a module-definition file and feed it verbatim.
NEWS: Update
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS) [dumpbin]: Adjust
lt_cv_sys_global_symbol_to_cdecl so that it declares imported
data symbols as __declspec(dllimport). Adjust
lt_cv_sys_global_symbol_to_c_name_address and
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix so that they
fill in "(void*) 0" for imported data symbols. Add new
lt_cv_sys_global_symbol_to_import which finds imported data
symbols if non-empty and export this variable to the libtool script
in the global_symbol_to_import variable. Adjust
lt_cv_sys_global_symbol_pipe so that data imports can be located.
* build-aux/ltmain.in (func_generate_dlsyms): When data imports
are present, as indicated by global_symbol_to_import, generate
a relocation function lt_syminit that fills in the addresses
of data imports at runtime and point to the new function with a
new virtual @INIT@ entry in the symbol list.
* libltdl/loaders/preopen.c (add_symlist): Look for the virtual
@INIT@ symbol (i.e. lt_syminit) and call it.
(vm_sym): Step past the @INIT@ symbol, if present.
* tests/demo.at (dlmain.c): Call the @INIT@ symbol, if present.
* NEWS: Update.
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
Modern GNU ASCII quoting in output and comments is done
'like this'.
* cfg.mk (sc_old_style_quoting): Try to catch most instances
of `old style quoting' so that it is not accidentally re-
introduced to the code.
* HACKING, Makefile.am, NEWS, PORTING, README, TODO, bootstrap,
bootstrap.conf, build-aux/edit-readme-alpha,
build-aux/git-hooks/commit-msg, build-aux/ltmain.in,
doc/libtool.texi, gl/build-aux/bootstrap.in,
gl/build-aux/extract-trace, gl/build-aux/funclib.sh,
gl/build-aux/inline-source, gl/build-aux/options-parser,
libltdl/libltdl/slist.h, libltdl/loaders/loadlibrary.c,
libltdl/ltdl.c, libltdl/slist.c, libtoolize.in, m4/argz.m4,
m4/libtool.m4, m4/ltdl.m4, m4/ltoptions.m4, m4/ltsugar.m4,
tests/cmdline_wrap.at, tests/configure-iface.at, tests/demo.at,
tests/depdemo.at, tests/deplib-in-subdir.at,
tests/deplibs-mingw.at, tests/destdir.at, tests/execute-mode.at,
tests/f77demo.at, tests/fail.at, tests/inherited_flags.at,
tests/libtool.at, tests/libtoolize.at, tests/lt_dladvise.at,
tests/lt_dlexit.at, tests/mdemo.at, tests/need_lib_prefix.at,
tests/old-ltdl-iface.at, tests/old-m4-iface.at, tests/static.at,
tests/stresstest.at, tests/testsuite.at, tests/versioning.at:
Convert to upright quotes.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize.in (func_install_pkgmacro_files): Uee
AC_CONFIG_MACRO_DIRS.
(func_check_macros): Advise using AC_CONFIG_MACRO_DIRS.
(require_ac_macro_dir): Give priority to AC_CONFIG_MACRO_DIRS.
(require_macro_dir): Likewise.
* bootstrap: Give priority to AC_CONFIG_MACRO_DIRS.
* configure.ac: Define dummy AC_CONFIG_MACRO_DIRS for older
Autotools, that is allow bootstrap with current release versions.
Use AC_CONFIG_MACRO_DIRS instead of AC_CONFIG_MACRO_DIR.
* tests/testsuite.at: Source build-aux/extract-trace for access
to func_extract_trace.
(LT_AT_ACLOCAL): Use it to get the AC_CONFIG_MACRO_DIRS argument
to pass manually to aclocal for compatibility with old Automake.
Add a fallback AC_CONFIG_MACRO_DIRS definition to acinclude.m4
in the test directory.
(LT_AT_AUTORECONF): Likewise.
* tests/cdemo.at, tests/configure-iface.at, tests/darwin.at,
tests/demo.at, tests/depdemo.at, tests/early-libtool.at,
tests/libtoolize.at, tests/mdemo.at, tests/no-executables.at,
tests/nonrecursive.at, tests/old-ltdl-iface.at,
tests/recursive.at, tests/subproject.at, tests/tagdemo.at,
tests/template.at: Likewise.
* doc/libtool.texi: Update.
* NEWS: Update.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS) [MSVC]: Extract symbols
imported from DLLs by import libraries in the Microsoft dumpbin
wrapper.
(LT_PATH_NM): Add -headers option if dumpbin is the located name
lister to feed the above new code.
* NEWS: Update.
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
* m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD) [MSVC]: Use
func_win32_libid as file_magic_cmd when the name lister
is MS dumpbin.
(_LT_CMD_GLOBAL_SYMBOLS): Export the new veriable nm_interface
to the libtool script.
* build-aux/ltmain.in (func_cygming_gnu_implib_p)
(func_cygming_ms_implib_p): Move up to before...
(func_win32_libid): ...which now uses them to determine if
the object is an import library when the nm_interface is
"MS dumpbin".
* NEWS: Update.
Signed-off-by: Peter Rosin <peda@lysator.liu.se>
Previous releases of libtoolize used the final invocation when
there were several, and after the rewrite over extract-trace,
all the invocation directories were concatenated. This change
enforces correct and consistent behaviour.
* tests/libtoolize.at (multiple AC_CONFIG_MACRO_DIR invocation):
New test.
* build-aux/extract-trace (func_extract_trace_first): New function
for clients that source this file, which returns only the first
argument to the first invocation of the named macros.
* libtoolize.in (func_require_ac_macro_dir): Use it to make sure
the first argument is always used.
(func_require_ac_aux_dir, func_require_ac_ltdl_dir)
(func_require_ac_ltdl_options): Future proof these functions against
multiple invocations or additional arguments to the macros they
trace.
* News (Important incompatible changes): Note change in semantics.
Reported by Eric Blake.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
If an object has a symbol lacking an expected leading underscore,
the symbol name is not printed, but the symbol type is, leading
to output such as:
T _normal _normal
T T _another _another
when the expected output would have been something like:
T _normal _normal
T no_underscore no_underscore
T _another _another
However, symbols lacking an expected leading underscore are
not "real" symbols, they are internal symbols which we don't
care about, therefore drop them instead.
* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS) [MSVC]: Output the whole
symbol line in one go.
* NEWS: Update.
All legacy tests have been fully migrated to Autotest, so
no need to cling to the legacy scaffolding any more.
* tests/defs.m4sh: Delete file.
* configure.ac (AM_INIT_AUTOMAKE): Remove unused color-tests and
parallel-tests options.
* Makefile.am (defs_m4sh, defs_in, defs, TESTS): Remove.
Adjust all dependencies.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
See maintain.texi (Copyright Notices) for rules for maintaining
the years in copyright notices.
* All Files (Copyright): Updated with missing 2011 and 2012.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
Determine, on a function by function basis, what XSI features
are available in the shell that is actually running the script,
rather than the one that was picked at configure time by the
re-execution engine.
* m4/libtool.m4 (_LT_PROG_FUNCTION_REPLACE)
(_LT_PROG_REPLACE_SHELLFNS): Remove.
(_LT_CHECK_SHELL_FEATURES): Remove tests for XSI and += support.
* build-aux/general.m4sh (func_append, func_append_quoted)
(func_arith, func_len, func_basename, func_dirname)
(func_dirname_and_basename, func_stripname): List both enhanced
and fallback implementations, and choose one based on whether
the enhanced features required by the fastest version are
available.
* build-aux/getopt.m4sh (func_split_short_opt)
(func_split_long_opt): Ditto.
* build-aux/ltmain.m4sh (func_lo2o, func_xform): Ditto.
* tests/getopt-m4sh.at: Add tests for enhanced and fallback
implementations of func_arith, func_len, func_stripname and
func_dirname_and_basename.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
I like to name temporary directories that I will remove shortly
with two leading commas so that they sort lexicographically at
the top of `ls' output. Now, `./configure
--prefix=`pwd`/,,inst' works again, for the first time in
several years.
* cfg.mk (sc_prohibit_sed_s_comma): Comma is too common a
character to use routinely as the separator for sed
substitutions on file paths and other variables determined by
the user, causing bugs like the one I describe above. Make sure
we don't accidentally reintroduce any comma separators in
future.
* Makefile.am, bootstrap, bootstrap.conf, build-aux/extract-trace,
build-aux/general.m4sh, build-aux/git-hooks/commit-msg,
build-aux/git-log-fix, build-aux/ltmain.m4sh, libtoolize.m4sh,
m4/libtool.m4, m4/ltdl.m4, tests/cdemo-undef.test,
tests/cmdline_wrap.at, tests/darwin.at, tests/defs.m4sh,
tests/getopt-m4sh.at, tests/install.at, tests/libtoolize.at,
tests/mdemo/Makefile.am, tests/need_lib_prefix.at,
tests/sysroot.at, tests/tagdemo-undef.test, tests/testsuite.at:
Try to use `|' as the default separator wherever possible,
otherwise something else that doesn't occur in the substitution
expression.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
In addition to moving the autoconf auxiliary script directory
into the place expected by GNU developers ($top_srcdir/build-aux)
we also simplify libtoolize somewhat by having libltdl use
whatever directory was specified by the parent project. This is
much more flexible, allows libltdl client projects to also use a
single canonical `$top_srcdir/build-aux' auxiliary script
directory, and maintains backward compatibility with existing
projects that wish to continue using $ltdl_dir/config.
* libltdl/config: Moved whole directory from here...
* build-aux: ...to here.
* libtoolize.m4sh (func_install_pkgaux_subproject): Remove.
(func_install_pkgaux_parent): Remove.
(func_install_pkgaux_files): Considerably simplified now that we
have only a single auxiliary directory to worry about.
(subproject_aux_dir): Remove.
* bootstrap.conf (libtool_readme_release_package_substitutions):
No need to substitute our old unusual aux_dir location into
README-release any more.
* cfg.mk (_build-aux): Now that we use the standard location for
this directory, no need to set this variable either.
* configure.ac (AC_INIT): git-version-gen has moved.
(AC_CONFIG_AUX_DIR): Adjust.
* Makefile.am (stamp-mk, auxexefiles, auxfiles)
(install-data-local): Use build-aux instead of config.
(libltdl/stamp-mk): Ditto.
* libltdl/configure.ac, tests/cdemo/configure.ac,
tests/demo/configure.ac, tests/depdemo/configure.ac,
tests/f77demo/configure.ac, tests/fcdemo/configure.ac,
tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
tests/pdemo/configure.ac, tests/tagdemo/configure.ac
(AC_CONFIG_AUX_DIR): Ditto.
* tests/defs.m4sh (aux_dir): Ditto.
* tests/configure-iface.at, tests/getopt-m4sh.at,
tests/libtoolize.at, tests/subproject.at, tests/testsuite.at:
Ditto.
* Makefile.am (ltdl_ac_aux_dir): Extract at build-time...
* libtoolize.m4sh (require_ltdl_ac_aux_dir): ...so that
libtoolize can access it at runtime without requiring GNU M4 via
the extract-trace script.
(require_Makefile_am_filter): Use it to determine whether the
aux_dir declared in the current (parent) project configure is
compatible with the declarations in installed ltdl autotools
source files.
(require_configure_ac_filter): New function to perform similar
checks and rewrite configure.ac during installation if necessary.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
In addition to moving the autoconf macro directory into the
place expected by GNU developers ($top_srcdir/m4), we also
simplify libtoolize somewhat by having libltdl use whatever
directory was specified by the parent project. This is much
more flexible, allows libltdl client projects to also use a
single canonical `$top_srcdir/m4' macro directory, and maintains
backward compatibility with existing projects that wish to
continue using $ltdl_dir/m4.
* libltdl/m4: Moved to it's parent directory.
* Makefile.am (ACLOCAL_AMFLAGS, BUILDCHECK_ENVIRONMENT)
(libltdl/Makefile.am, libltdl/aclocal.m4): Adjust.
* configure.ac (AC_CONFIG_MACRO_DIR): Adjust.
* libltdl/configure.ac (AC_CONFIG_MACRO_DIR): Remove. The
libtoolize script can pick up the project macro directory from
ACLOCAL_AMFLAGS in libltdl/Makefile.am, saving us from needing
to regenerate configure for the sake of a different macro
directory declared in the libltdl using client project.
* libtoolize.m4sh (func_install_pkgmacro_subproject): Remove.
(func_install_pkgmacro_parent): Remove.
(subproject_macro_dir): Remove.
(require_libltdl_Makefile_am, require_ltdl_aclocal_amflags)
(require_ltdl_am_macro_dir): New functions, generated at runtime
by adding libltdl/Makefile.am to the generation loop.
(func_install_pkgmacro_files): Considerably simplified now that
we have only a single macro directory to worry about.
(require_ltdl_relative_macro_dir): New function. Calculate the
relative path from $ltdl_dir to the parent project macro_dir.
(require_Makefile_am_filter): Depending on $ltdl_mode, edit
Makefile.am ACLOCAL_AMFLAGS to use the parent project macro
directory if necessary.
(require_aclocal_m4_filter): Make sure m4_includes point to the
correct macro directory by editing the file as it is copied
into the parent project.
(func_install_pkgltdl_files): Use the filters.
(func_check_macros): Remove various advice that no longer
applies with an always shared macro directory.
(func_require_ltdl_dir): Don't default ltdl_dir to subproject
when `--ltdl' was not given.
(func_require_ltdl_mode): Leave ltdl_mode empty when ltdl_dir is
not set.
(func_require_macro_dir): Default to $ltdl_dir/m4 in subproject
mode with no other directory implied by AC_CONFIG_MACRO_DIR or
ACLOCAL_AMFLAGS, otherwise m4 as before.
* tests/libtoolize.at: Match new "creating file `Makefile.am'"
messages correctly.
(subproject ltdl with non-shared directories): This test no
longer makes sense, so repurposed...
(subproject ltdl with non-canonical macro dir): ...this, to
ensure subproject ltdl continues to automatically share the
parent macro directory.
* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
tests/fcdemo/Makefile.am, tests/mdemo/Makefile.am,
tests/mdemo2/Makefile.am, tests/pdemo/Makefile.am,
tests/tagdemo/Makefile.am (ACLOCAL_AMFLAGS): Use new location
of macro_dir.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/Makefile.inc: Moved from here...
* libltdl/ltdl.mk: ...to here.
* Makefile.am, bootstrap.conf, tests/libtoolize.at,
tests/nonrecursive.at: Adjust.
* libtoolize.m4sh (func_install_pkgltdl_files): Set the
destination file to `Makefile.inc' if grep finds an include for
that name in a top-level Makefile.am.
(func_check_macros): Print a deprecation warning if use of the
old `Makefile.inc' convention is found.
* tests/old-ltdl-iface.at: New test for renaming and warning
correctly when `Makefile.inc' convention is still in use.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize (func_scan_files): Removed function and callers.
(require_seen_ltdl, require_seen_libtool): Factor out remaining
functionality of former sed based scanning.
(func_check_macros): Adjust.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize.m4sh (func_install_pkgmacro_files): If there is no
$configure_ac in the parent project directory, and libtoolize is
in subproject mode, then the parent project has no use for
autoconf macros, so don't install them.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize.m4sh (func_install_pkgconfig_subproject): When the
parent project does not use Autoconf, be sure to display an
output header before copying auxiliary files despite not being
able to scan for AC_CONFIG_AUX_DIR arguments.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize.m4sh (func_extract_trace): Function to call
$aux_dir/extract-trace. The name and footprint are the same as
the core function in the extract-trace script file so that we
can choose to source that file when the option processing
becomes compatible with ours.
(require_ac_macro_dir, require_aclocal_amflags)
(require_am_macro_dir, require_macro_dir, require_makefile_am):
New functions factored out of func_scan_files for scanning and
setting macro_dir and friends.
(func_scan_files): Remove the factored out code to scan
configure.ac with sed, and then set macro_dir appropriately.
(func_serial_update_check, func_install_pkgmacro_subproject)
(func_install_pkgmacro_parent, func_install_pkgmacro_files)
(func_check_macros): Adjust.
* tests/libtoolize.at (Subproject ltdl without GNU M4): New test
to ensure `libtoolize --subproject' continues to work without a
GNU M4 dependency.
* NEWS: Updated.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize (M4SH_GETOPTS): Remove `--standalone', which never
worked, and add `--subproject' which sets ltdl_mode correctly.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize.m4sh (func_fixup_Makefile): `\\\\\$' in a " quoted
script that is evaluated twice before execution becomes a `\$',
which sed interprets as a literal $. The script will then delete
any lines with a first non-whitespace character of `$'. Instead
use `\\\\$' in single quotes, which sed eventually receives as
`\\$' and correctly interprets as part of an instruction to
delete otherwise empty lines ending with a `\'.
Additionally the rest of the same sed script is no longer
applied to comment lines to avoid munging the copyright header
among others.
* NEWS: Updated.
* Makefile.am (tests/testsuite): Passing only $(srcdir) include path
to autom4te is unable to find tests/package.m4, and passing only
$(srcdir)/tests breaks VPATH build searches for TESTSUITE_AT files,
which are relative to $(srcdir)... so we pass both!
* NEWS: Updated.
Reported by Bob Friesenhahn.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
numbers.
* NEWS: Add header line for next release.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
