ensure that import libraries don't get stripped.
* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): On Windows based hosts,
use postinstall_cmds to strip DLL (not import lib!) when symbol
stripped installation was requested.
pass. When the output wrapper script is not in the current
directory, we can not use an rpath which is relative to the
current directory. Use an absolute path instead.
to escape $ properly in combination with double_quote_subst.
(func_quote_for_eval): Four space indent margin for functions!
(func_quote_for_expand): Use $sed_double_backslash.
(func_show_eval): New function that echos an escaped but variable
expanded command, and then evaluates it.
from the match character set.
(double_quote_subst): Ditto.
* lib/general.m4sh (sed_quote_subst): Ditto.
(double_quote_subst): New variable, copied from
m4/libtool.m4. Much the same as sed_quote_subst, but variable
references are not quoted.
(func_quote_for_eval): Given any $foo; $bar and
$foo must be identical after the following commands:
func_quote_for_eval "$foo"
eval "bar=$func_quote_for_eval_result"
(func_quote_for_expand): In a similar vein to to func_quote_for_eval,
except that variable expansions are not protected when quoting the
command for subsequent display.
* config/ltmain.m4sh: Factor away use of $sed_quote_subst now that
it has been subsumed into func_quote_for_eval.
(func_mode_link): Instead of `2004-10-14 Peter O'Gorman' below,
use func_quote_for_expand so that ${wl} is expanded properly in
the $show expression.
in dllsearchpath when creating wrapper script. Fixes
depdemo-relink test failure.
* config/ltmain.m4sh (func_mode_link): don't relink
on cygwin/mingw; no need. But do ensure that wrappers
are created unless doing a purely static build.
gary@gnu.org--2004/cvs-utils--tla--1.0:
* commit, config/mailnotify: Removed. Now built from...
* clcommit.m4sh, config/mailnotify.m4sh: ...these new sources.
* Makefile.maint (commit, config/mailnotify): How to build them.
* bootstrap: If we have a checked out tree (i.e. clcommit.m4sh
is present), then build them.
and thus prevented it from finding itself:
* config/general.m4sh (progname): Don't actually change the name
of the script if it begins with a `-', just prepend `./'.
(progpath): Add a new clause that first searches the execution
PATH, and then finally assumes this script is in the current
working directory if $progname has no directory separators (e.g
when invoked as `$SHELL progname').
* config/ltmain.m4sh: Windows and Cygwin reserve the .lnk
extension to represent shortcuts. Use the extension ".lnkscript"
rather than ".lnk" for the piecewise linking ld script in order to
avoid the conflict.
with $lt_ECHO, or we always get a libtool with ECHO=echo, rather
than testing for a mechanism that quotes properly.
* NEWS: Updated.
* config/ltmain.m4sh: Need to include getopt.m4sh earlier so that
progpath is set before it is called to --no-reexec.
* NEWS: Updated.
Without this change, the distributed libtool tarball has a
dependency on autom4te. There was some inconsistency in the
filenames: now we have foo.m4sh -> m4sh -> foo.in -> configure
-> foo[.sh]. Bootstrap runs the m4sh steps and the resulting .in
files are distributed:
* tests/Makefile.am (EXTRA_DIST): Distribute defs.m4sh.
* Makefile.am (EXTRA_DIST): Distribute libtoolize.m4sh.
(libtoolize.in, libtoolize): Split into bootstrap and runtime
stages.
($(top_srcdir)/tests/defs.in, $(top_srcdir)/tests/defs): Ditto.
($(top_srcdir)/config/ltmain.sh): Swap ltmain.m4sh and ltmain.in
names.
* bootstrap: Make libtoolize.in and tests/defs.in.
* NEWS: Updated.
libtool library on the command line using -lfoo we need to find
the library in the search paths and add it's dependency_libs to
the link in the conv pass so that any libtool libs listed are
correctly expanded in the link pass.
ltmain.in.
(ECHO): Audit for (and correct!) uses of $ECHO with more than one
argument, which breaks when ECHO='printf %sn', and with possible
`-' as first character of the argument, which breaks `print -r'
and some implementations of `echo'.
* config/ltmain.in, tests/defs.in, libtoolize.in (ECHO): Ditto.
Reported by Albert Chin-A-Young <china@thewrittenword.com>
* config/general.m4sh, config/getopt.m4sh: New files with factored
out functionality from...
* config/ltmain.in, libtoolize.in: ...here. m4_include the shared
code, and call AS_SHELL_SANITIZE. Also quote all `[' and `]' to
survive m4 run.
(func_serial): No need to double up m4sh quotes after a `#'.
(func_check_macros): Escape `dnl' to stop m4sh interpreting it as
a macro.
* tests/defs.in: New file expanded into tests/defs by autom4te.
* m4/libtool.m4 (_LT_DECL_EGREP): Also require fgrep for the tests
that use it.
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Now built with
M4SH.
(libtoolize): Ditto.
* bootstrap: Set M4SH for call to make.
* HACKING: No need to sync to AS_SHELL_SANITIZE by hand any more.
* config/ltmain.in: Use it throughout.
(func_mkdir_p): Now matches the other implementations in
tests/defs and libtoolize.in.
* tests/sh.test: Updated to detect ECHO misuse.
$deplibs list. This causes problems when the link pass tries to
find libraries when they are located in non-standard places
denoted by -L options. Due to the reversed order these -L options
occur after the libraries that need them, and they are not found:
* config/ltmain.in: (Un)Reverse $deplibs list at the start of the
link pass in lib mode.
a .exp file for an executable, also create a .def file, and add
that file to the link command via SYMFILES. This causes binutils
to generate an .edata section, and allows self dlopening to work.
* NEWS: Updated.
_preloaded_symbols[] cannot go into .rdata section if symbols are
DATA imported from DLL, on windows, because runtime relocations
must happen.
* m4/libtool.m4 (_LT_LINKER_SHLIBS([TAGNAME])): Build exports for
symbols in .rdata sections.
patch; fix them carefully. Introduce an opt_dry_run to ltmain.in
so that the implementations of func_mkdir_p can converge, and a
func_mktempdir to do a better job of temporary directory creation:
* libtoolize.in (func_mkdir_p): Don't fail if the directory wasn't
created in dry run mode.
* tests/defs (func_mkdir_p): Ditto. We don't actually have a dry
run mode for the tests, but the function is written carefully to
be kept in synch and work correctly here too.
* config/ltmain.in (func_mkdir_p): Ditto. This copy of the
function now only differs in its use of $echo over $ECHO.
(func_extract_archive): Removed first redundant mkdir call.
(func_mktempdir): New function that tries to avoid races when
making temporary directories.
(opt_dry_run): Set this if --dry-run is given at the CLI, or if
tests/mdemo-dryrun.test has forced the value of $run.
(func_mode_install): Call $MKDIR directly and error out if the
directory cannot be created.
(func_mode_link): Rather than copying func_mkdir_p into the
wrapper script as a replacement for $MKDIR_P, we know that the
script won't be called my `make -j', so write the current value of
$MKDIR.
below is horrendously broken since it makes the installed libtool
try to run the mkinstalldirs or install-sh helper scripts. This
patch fixes the `make -j' mkdir race condition internally:
* libtoolize.in (func_mkdir_p): New slice and dice algorithm
to build the directory tree one dir at a time, ignoring errors
until the end incase they are transient due to a concurrent
identical mkdir.
* tests/defs (func_mkdir_p): Ditto.
* config/ltmain.in (func_mkdir_p): Ditto, except that ltmain.in
uses $echo rather than $ECHO, and uses $show and $run to interact
correctly with the command line.
* configure.ac (AM_INIT_AUTOMAKE): 1.8 is sufficient again.
* Makefile.am (edit): Don't substitute automake's $(mkdir_p).
* NEWS: Updated.
from Gary V. Vaughan) to compile under MinGW.
* config/mkstamp: Translate input data so that it is assured to
use the Unix line terminations. This is necessary under Windows if
the files are checked out with CR/NL line terminations. A
side-effect of this change is that input must always be from
stdin. Previously a filename argument was accepted as well.
avoid forking at every call. Changed all callers.
(func_mode_link): Simplified, and removed the final non-portable
nested escaped double quotes in back quotes usage in the process.
compiler flags need an argument or not, and can disect options and
pass parts through incorrectly. This changeset reverts both
2004-09-06 Albert Chin-A-Young (topmost) and 2004-09-05 Albert
Chin-A-Young below, and recognises more options explicitly:
* config/ltmain.in (func_mode_link): Pass through options needed
to compile in 64-bit mode with gcc, and the SGI, Sun, HP and IBM
compilers.
unmolested will prove to be a good plan for the 2.0 release. If
it goes awry, we can get back to where we were by reverting this
patch and the 2004-09-05 Albert Chin-A-Young patch, aka
gary@gnu.org--2004/libtool--devo--1.0--patch-169,172:
* config/ltmain.in (func_mode_link): Because we now pass through
compiler arguments we doesn't recognize, the code to pass
through GCC's -m* arguments is not needed.
already exists warnings" for .lib directory. Build on automake
wisdom to support make -j builds where a suitable mkdir is
available:
* configure.ac (AM_INIT_AUTOMAKE): Require 1.9, which goes to some
trouble to find a $(mkdir_p) that doesn't interfere with make -j.
* Makefile.am (edit): Substitute for @mkdir_p@.
* config/ltmain.in (MKDIR_P): Take @mkdir_p@ value.
(mkdir): Removed.
(func_mkdir_p): New function to use $MKDIR_P. Factor out all
previous mkdir calls to use this function.
(RM, MV): Declared as in libtoolize.in. Changed all callers.
* libtoolize.in (MKDIR_P): Take @mkdir_p@ value from automake.
(func_mkdir_p): Use it, similarly to new config/ltmain.in.
* tests/defs: Synchronize boiler plate code with ltmain.in.
Adjust all callers.
Add missing copyright preamble.
* tests/demo-static.test: Add missing copyright preamble.
Reported by Daniel Reed <n@ml.org>
preamble.
* tests/defs: Put a full m4sh.m4 style 'Be Bourne compatible'
preamble in here too.
* HACKING: Note that tests/defs needs synching with m4sh.m4 too.
* TODO: Add new item.
compatible. Instead, revert to the old way of doing things with
an array of symbol name vs. address, and adding the originator as
the first symbol but with a NULL address:
* config/ltmain.in (func_extract_dlsyms): Store originator as a
NULL address symbol.
* libltdl/ltdl.h (lt_dlsymbol): Removed.
(lt_dlsymlist): Remove originator field.
(LTDL_SET_PRELOADED_SYMBOLS): Adjust.
* libltdl/loaders/preopen.c (vm_open, lt_dlpreload_open): Adjust
for new types.
(vm_sym): Skip the new originator symbol when scanning symbol
names.
* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Adjust preloaded symbols
test file to match.
* NEWS: Updated.
