Not only does it make more sense, it also matches bootstrap and
others.
* libtoolize.m4sh, libltdl/config/ltmain.m4sh,
libltdl/config/getopt.m4sh, tests/defs.m4sh (opt_debug): Rename
to debug_cmd.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* configure.ac (pkgaux_scripts): Centrally maintain the complete
list of aux scripts required to build libltdl, and which need to
be installed by libtoolize --ltdl, and consequently need to be
placed in $pkgdatadir by make install.
* Makefile.am (libltdl/stamp.mk): Improved to strip the unused
scripts not listed in pkgaux_scripts without the need for manual
synchronisation.
(auxexefiles): Removed. Replaced by new pkgaux_scripts
substitution.
(install-data-local): Adjust.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* bootstrap (func_require_autobuild_buildreq): Skip if autobuild.m4
is already present.
* bootstrap.conf (require_autobuild_bulidreq): No need to set this
specially any more.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* bootstrap (func_gnulib_tool_copy_file): When gnulib-tool is
not available, check that there is a copy of the file from a
previous run available before bailing out with a diagnostic.
(func_install_gnulib_non_module_files): Don't diagnose missing
files explicitly - func_gnulib_tool_copy_file takes care of it
now.
(func_require_checkout_only_file): In the diagnostic for
not being in a source-controlled tree, note that `--force' must
be used to rebootstrap.
(func_require_gnulib_files_already_present): Removed. All the
necessary checks are correctly performed in
func_gnulib_tool_copy_file withot resorting to heuristics.
(func_require_gnulib_mk): Don't continue to try to access
gnulib-cache.m4 after discovering we're running from a dist
tarball.
(func_require_dotgitmodules_parameters): Skip if .gitmodules
file is missing and git binary is not available.
* bootstrap.conf (checkout_only_file): Set to HACKING, which is
a non-distributed file.
(libtool_cleanup_empty_dirs): Don't print spurious errors when
trying to delete gnulib-tool droppings, in case gnulib-tool is
not available on this run.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtoolize.m4sh (func_fixup_Makefile): `\\\\\$' in a " quoted
script that is evaluated twice before execution becomes a `\$',
which sed interprets as a literal $. The script will then delete
any lines with a first non-whitespace character of `$'. Instead
use `\\\\$' in single quotes, which sed eventually receives as
`\\$' and correctly interprets as part of an instruction to
delete otherwise empty lines ending with a `\'.
Additionally the rest of the same sed script is no longer
applied to comment lines to avoid munging the copyright header
among others.
* NEWS: Updated.
* ChangeLog: Removed.
* HACKING (Editing 'ChangeLog'): Removed. Renumbered other sections to
compensate.
* bootstrap.conf (gnulib_modules): Add gitlog-to-changelog.
* Makefile.am (ChangeLog): Generate the ChangeLog for 2011...
(dist-hook): ...from the output of `git log' before rolling a
distribution tarball.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/config/mkstamp: File removed.
* bootstrap.conf (gnulib_modules): Add git-version-gen.
* configure.ac (AC_INIT, package_revision): Use git-version-gen to
calculate version number.
(TIMESTAMP): Removed.
* libtoolize.m4sh, libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4
(TIMESTAMP): Ditto.
* Makefile.am (TIMESTAMP): Ditto.
(MKSTAMP): Renamed from this...
(git_version_gen): ...to this. Set revision here. An alpha is now a
release with an odd micro relase number.
(rebuild): Don't reset revision here.
(build_scripts): Remove mkstamp, add git-version-gen.
(EXTRA_DIST, BUILT_SOURCES): Add .version.
(libltdl/config/ltmain.sh, libltdl/m4/ltversion.m4, tests/package.m4):
Don't depend on configure.ac or ChangeLog to determine when the
version number has reved, use .version directly.
(.version): Flush most recent configure calculated VERSION to disk.
(dist-hook): Flush current VERSION to disk at dist time.
(dotserial): Distributed file to cache the serial number for
when git is not available to recalculate it when building from a
release tarball.
(dist-hook): Make sure .serial is created.
(libltdl/config/ltversion.m4): Use .serial when it is present
(in a dist tarball) or calculate with git otherwise (in a git
working directory).
(EXTRA_DIST): Add .serial file.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (tests/testsuite): Passing only $(srcdir) include path
to autom4te is unable to find tests/package.m4, and passing only
$(srcdir)/tests breaks VPATH build searches for TESTSUITE_AT files,
which are relative to $(srcdir)... so we pass both!
* NEWS: Updated.
Reported by Bob Friesenhahn.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libtool.texi (@copying): Use this instead of @ifnottex; format for
Texinfo; eliminate obsolete paragraph about TeX; use @insertcopying
instead of duplicating text.
(@syncodeindex): Move all to the Texinfo header, where they belong.
(@dircategory): Use "Software development" instead of "GNU programming
tools", for consistency; and align individual entries to avoid
multiple lines; and move to after the copyright message.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* bootstrap.conf (gnulib_modules): Add maintainer-makefile.
(gnulib_tool_options): Add --avoid=dummy now that we have a real
module to import.
* cfg.mk: New file. Customize maint.mk for Libtool.
* Makefile.am (EXTRA_DIST): Add GNUmakefile, cfg.mk and maint.mk.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* COPYING, libltdl/COPYING.LIB: Removed.
* bootstrap.conf (gnulib_non_module_files): Add COPYING.
(libtool_add_libltdl_copying): New func_gnulib_tool hook
function to copy the canonical LGPL2 COPYING file from gnulib at
bootstrap.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* bootstrap: Replaced with gnulib script.
* bootstrap.conf: New file with Libtool specific bootstrap
configuration.
* Makefile.am (EXTRA_DIST): Add bootstrap.conf.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* configure.ac (GL_INIT, GL_EARLY): Initialise gnulib, and expand
its configure time checks.
* .gitmodules (gnulib): New file with configuration for our
gnulib git submodule.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
The `gnulib-tool' and gnulib `bootstrap' scripts maintain
`.gitignore' files in asciibetical order, so reorder them now
to avoid spurious patches later.
Take advantage of putting recursive file ignore matches into
`$top_srcdir/.gitignore' and remove repetitions from other
`.gitignore' files.
* Makefile.am (doc/libtool.1, doc/libtoolize.1): Added a
comment about why the dependencies here have to be a mite
bizarre.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* configure.ac (AC_CONFIG_AUX_DIR, LT_CONFIG_LTDL_DIR)
(AC_CONFIG_MACRO_DIR): Append code to these functions to
capture and propagate their directory arguments to Makefile.
* Makefile.am (aux_dir, ltdl_dir, macro_dir): Remove declarations.
* bootstrap (my_sed_trace): Also capture LT_CONFIG_LTDL_DIR into
`$ltdl_dir'.
<Makefile>: Output the extracted values of `aux_dir', `ltdl_dir'
and `macro_dir' at the top of the quick'n'dirty bootstrap
Makefile.
* Makefile.am (ltmain_sh_edit): Expand upon bootstrap edit by
adding the extra line to delete boilerplate variable settings
from libltdl/config/general.m4sh that don't apply here.
(libltdl/config/ltmain.sh): Use it.
* Makefile.am (aux_dir, macro_dir): Include `$(srcdir)' in
declaration. Adjust all references.
(doc_dir, ltdl_dir, m4sh_dir, tests_dir): New single location
to hold directory paths, all including `$(srcdir)', to reduce
typing.
(LT_M4SH): Use `$m4sh_dir' as include directory.
(defs): This one is for a file in the build-tree, so no
leading `$(srcdir)'.
* Makefile.am (install-data-local): Undo character transposition
from too early push of untested v2.4-17-gaf74d58.
* ChangeLog (2010-09-16): Remove spurious entry.
* Makefile.am: Replace all uses of m4dir with macrodir to
match AC_CONFIG_MACRO_DIR.
* libltdl/config/libtoolize.m4sh: Replace all uses of macrodir
with macro_dir.
* tests/defs.m4sh, tests/sh.test: Likewise.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am, Makefile.maint: Replace all uses of auxdir
with aux_dir to match AC_CONFIG_AUX_DIR.
* libltdl/config/libtoolize.m4sh: Likewise.
* tests/defs.m4sh, tests/getopt-m4sh.at: Likewise.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am: In each rule body, unless a make variable needs
to be seen as multiple words by the shell (for word-splitting
loops, or because it contains several commands), quote it. Use
single quotes unless the shell needs to perform variable inter-
polation, in which case use double quotes.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (bootstrap_files): List files that need to be
generated at bootstrap time before `./configure && make' can
work. It turns out that this is considerably fewer files than we
had thought necessary previously.
(bootstrap-deps-prep): Ensure minimum set of required substitution
variables are non-empty.
(bootstrap-deps): Depend on `bootstrap' files.
* bootstrap (Generate bootstrap dependencies): Now that
`Makefile.am' is entirely responsible for rebuilding files at
bootstrap time, we need only specify the new `bootstrap-deps'
target, and supply values for the substitutions checked by
`bootstrap-deps-prep'.
* configure.ac (AC_CONFIG_SRCDIR): `libtoolize.in' is not here yet
right after running `bootstrap'. So rely on the presence of
`libltdl/config/libtoolize.m4sh', which is always there.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (libltdl/config/ltmain.sh, libtoolize.in): Pipe
the output of `$(LT_M4SH)' directly into `$(bootstrap_edit)' to
avoid use of superfluous intermediate file.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
According to the DRY principle, scattering several copies of
something across a file or project leads to pain. Let's not
do that!
* Makefile.am (Makefile_in, Makefile_inc, defs_in, defs_m4sh),
(libtoolize_in, ltmain_m4sh, ltversion_in): New variables to
hold the location of important files and targets.
(EXTRA_DIST): Add the distributed ones by variable.
(libtoolize, libltdl/Makefile.am, libltdl/m4/ltversion.m4)
(libltdl/config/ltmain.sh, libltdl/stamp-mk, tests/defs)
(tests/defs.in): Use the new variables to reduce noise and
repetition.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (libtoolize, libtoolize.in, libltdl/Makefile.am)
(libltdl/config/mkstamp, libltdl/config/ltmain.m4sh)
(libltdl/m4/ltversion.m4, tests/testsuite, tests/defs.in):
Make better use of automatic variables.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
Sadly, we still have to jump through hoops for MICROS~1's very
old, very broken 8.3 naming convention, so we have to be careful
to be unique in the first 8 letters, and not to use two periods
in a filename, otherwise we could use the much more elegent
`temporary files use "$@T"' idiom:
* Makefile.am (libltdl/m4/ltversion.m4): Rename temporary file
to `ltversion.tmp'.
(libltdl/config/ltmain.sh): Rename temporary file to
`libltdl/config/ltmain.tmp'.
(libtoolize): Rename temporary file to `libtoolize.tmp'.
(tests/defs): Rename temporary file to `tests/defs.tmp'
(tests/testsuite): Rename temporary file to `tests/testsuite.tmp'.
(CLEANFILES): Append temporary files as we create rules that
use them.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (LT_M4SH): Now that all directories are listed as
fully qualified paths, the search path argument to M4SH is always
the same, so factor it out into a variable. Adjust all callers.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (doc/notes.txt, libltdl/m4/ltversion.m4,
(libltdl/config/ltmain.m4sh, libtoolize.in, libltdl/Makefile.am)
(libltdl/config/mkstamp, tests/testsuite, tests/defs.in): Avoid
unnecessary `cd' commands by using fully qualified paths to files
outside of current directory.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (rebuild): Set the shell variable `revision' rather
than `correctver' for clarity of purpose.
(bootstrap_edit, libltdl/config/ltmain.sh): Adjust.
(libltdl/m4/ltversion.m4): Likewise, and alse, instead of munging
the serial number comment line with set, extract `macro_version'
from this file, and compare it directly with `revision'.
(libtool): Likewise for `package_revision'.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* Makefile.am (tests/package.m4): @FOO@ substitutions have already
been made by the time Makefile.am has been transformed into Makefile,
so don't try to rerun the substitutions manually with
$(bootstrap_edit) after the fact.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
numbers.
* NEWS: Add header line for next release.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/m4/libtool.m4, libltdl/config/ltmain.m4sh: Replace leading
spaces in soure code with tabs to match surrounding code.
Reported by Peter Rosin.
Signed-off-by: Gary V. Vaughan <gary@gnu.org>
* libltdl/m4/libtool.m4 (version_type): Add a comment to change
version_type setting from 'linux' to 'gnu/linux' during the next
destabilising code refactoring.
* libltdl/config/ltmain.m4sh: ditto.
Requested by Richard Stallman.
