libtool/libtool.m4

## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
## Copyright (C) 1996-1999 Free Software Foundation, Inc.
## Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
##
## As a special exception to the GNU General Public License, if you
## distribute this file as part of a program that contains a
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.

# serial 34 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl

# Save cache, so that ltconfig can load it
AC_CACHE_SAVE

# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
DLLTOOL="$DLLTOOL" AS="$AS" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])

# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_SYS_NM_PARSE])dnl
AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

*-*-cygwin*)
  AC_SYS_LIBTOOL_CYGWIN
  ;;

esac

# enable the --disable-libtool-lock switch

AC_ARG_ENABLE(libtool-lock,
[  --disable-libtool-lock  force libtool not to do file locking],
need_locks=$enableval,
need_locks=yes)

if test x"$need_locks" = xno; then
  libtool_flags="$libtool_flags --disable-lock"
fi
])

# AC_LIBTOOL_DLOPEN - check for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])

# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_SHARED,
[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED,
[AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_STATIC,
[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])

# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC,
[AC_ENABLE_STATIC(no)])


# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL,
[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL,
[AC_ENABLE_FAST_INSTALL(no)])


# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
changequote(,)dnl
    /* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
AC_PROG_LD_GNU
])

AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi])
])

# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])

# AC_SYS_NM_PARSE - Check for command ro grab the raw symbol name followed
# by C symbol name from nm.
AC_DEFUN(AC_SYS_NM_PARSE,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_NM])dnl
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output])
AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
[# These are sane defaults that work on at least a few old systems.
# {They come from Ultrix.  What could be older than Ultrix?!! ;)}

changequote(,)dnl
# Character class describing NM global symbol codes.
ac_symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
ac_symxfrm='\1 \1'

# Define system-specific variables.
case "$host_os" in
aix*)
  ac_symcode='[BCDT]'
  ;;
cygwin* | mingw*)
  ac_symcode='[ABCDGISTW]'
  ;;
irix*)
  ac_symcode='[BCDEGRST]'
  ;;
solaris*)
  ac_symcode='[BDT]'
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  ac_symcode='[ABCDGISTW]'
fi
changequote([,])dnl

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
  # Unlike in ltconfig.in, we need $ac_symprfx before $ac_symxfrm here,
  # otherwise AC_SYS_SYMBOL_UNDERSCORE will always be false
  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]$ac_symcode[ 	][ 	]*$ac_symprfx$ac_sympat$/$ac_symprfx$ac_symxfrm/p'"

  # Check to see that the pipe works correctly.
  ac_pipe_works=no
  rm -f conftest.$ac_ext
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func;return 0;}
EOF

  if AC_TRY_EVAL(ac_compile); then
    # Now try to grab the symbols.
    ac_nlist=conftest.nm
  
    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then

      # Try sorting and uniquifying the output.
      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
	mv -f "$ac_nlist"T "$ac_nlist"
      else
	rm -f "$ac_nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
	  cat <<EOF > conftest.c
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  sed 's/^.* \(.*\)$/extern char \1;/' < "$ac_nlist" >> conftest.c

	  cat <<EOF >> conftest.c
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
changequote(,)dnl
lt_preloaded_symbols[] =
changequote([,])dnl
{
EOF
	sed 's/^\(.*\) \(.*\)$/  {"\1", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
	cat <<\EOF >> conftest.c
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftestm.$ac_objext
	  ac_save_LIBS="$LIBS"
	  ac_save_CFLAGS="$CFLAGS"
	  LIBS="conftestm.$ac_objext"
	  CFLAGS="$CFLAGS$no_builtin_flag"
	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
	    ac_pipe_works=yes
	  else
	    echo "configure: failed program was:" >&AC_FD_CC
	    cat conftest.c >&AC_FD_CC
	  fi
	  LIBS="$ac_save_LIBS"
	  CFLAGS="$ac_save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
	fi
      else
	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
      fi
    else
      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
    fi
  else
    echo "$progname: failed program was:" >&AC_FD_CC
    cat conftest.c >&AC_FD_CC
  fi
  rm -rf conftest*

  # Do not use the global_symbol_pipe unless it works.
  if test "$ac_pipe_works" = yes; then
    if test x"$ac_symprfx" = x"_"; then
      ac_cv_sys_symbol_underscore=yes
    else
      ac_cv_sys_symbol_underscore=no
    fi
    break
  else
    ac_cv_sys_global_symbol_pipe=
  fi
done
])

ac_result=yes
if test -z "$ac_cv_sys_global_symbol_pipe"; then
   ac_result=no
fi
AC_MSG_RESULT($ac_result)
])

# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
])

# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
#                            with an underscore?
AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
[AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_SYS_NM_PARSE])dnl
AC_MSG_CHECKING([for _ prefix in compiled symbols])
AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
[ac_cv_sys_symbol_underscore=no
cat > conftest.$ac_ext <<EOF
void nm_test_func(){}
int main(){nm_test_func;return 0;}
EOF
if AC_TRY_EVAL(ac_compile); then
  # Now try to grab the symbols.
  ac_nlist=conftest.nm
  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
    # See whether the symbols have a leading underscore.
    if egrep '^_nm_test_func' "$ac_nlist" >/dev/null; then
      ac_cv_sys_symbol_underscore=yes
    else
      if egrep '^nm_test_func ' "$ac_nlist" >/dev/null; then
	:
      else
	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
      fi
    fi
  else
    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
  fi
else
  echo "configure: failed program was:" >&AC_FD_CC
  cat conftest.c >&AC_FD_CC
fi
rm -rf conftest*
])
AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM, [
AC_CHECK_LIB(mw, _mwvalidcheckl)
AC_CHECK_LIB(m, cos)
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
  case "$enable_ltdl_convenience" in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
    case "$enable_ltdl_install" in
    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
    "") enable_ltdl_install=yes
        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
    esac
  ])
  if test x"$enable_ltdl_install" != x"no"; then
    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
  fi
])

dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl