libtool/HACKING

GNU Libtool
***********

1. Introduction
===============

This file attempts to describe the processes we use to maintain libtool,
and is not part of a release distribution.

2. Maintenance Notes
====================

* If you incorporate a change from somebody on the net:
  If it is a large change, you must make sure they have signed the
  appropriate paperwork, and be sure to add their name and email
  address to THANKS

* If a change fixes a test, mention the test in the ChangeLog entry.

* If somebody reports a new bug, mention his name in the ChangeLog entry
  and in the test case you write.

* The correct response to most actual bugs is to write a new test case
  which demonstrates the bug.  Then fix the bug, re-run the test suite,
  and check everything in.

* Some files in the libtool package are not owned by libtool.  These
  files should never be edited here.  These files are:
	COPYING
	INSTALL
	config/
	    + config.guess
	    + config.sub
	    + depcomp
	    + install-sh
	    + mdate-sh
	    + missing
	    + texinfo.tex
	doc/
	    + fdl.texi
	libltdl/
	    + COPYING.LESSER
	    + config.guess
	    + config.sub
	    + install-sh
	    + missing
  The ones that are important for a release can be udated with,
  `make -fMakefile.maint fetch'.

* Changes other than bug fixes must be mentioned in NEWS


2. Test Suite
=============

* Use "make check" liberally, on as many platforms as you can.  Use as
  many compilers and linkers you can.


3. Naming
=========

* We've adopted the convention that exported Autoconf macros should be
  named with a leading `LT_' and be documented in the libtool manual.
  Internal macros begin with `_LT_' if they are visible to aclocal, or
  potentially part of an AC_DEFUN/AC_REQUIRE path, or else `_lt_' if
  they are very low level.  This convention was only introduced just
  before libtool-2.0, so there may still be exceptions in the existing
  code.  But all new code should use it.

* All shell variables used internally by libtool's Autoconf macros
  should be named with the a leading `lt_' (not that they cannot clash
  with the `_lt_' macro namespace).


4. Editing `.am' Files
======================

* Always use $(...) and not ${...}

* Use `:', not `true'.  Use `exit 1', not `false'.

* Use `##' comments liberally.  Comment anything even remotely unusual.

* Never use basename or dirname.  Instead use sed.

* Do not use `cd' within back-quotes, use `$(am__cd)' instead.
  Otherwise the directory name may be printed, depending on CDPATH.

* In general, if a loop is required, it should be silent.  Then the body
  of the loop itself should print each "important" command it runs.


5. Editing libtoolize.in and ltmain.in
======================================

* Use shell functions, but be careful not to assume local scope for
  variable names.  Don't use `return', instead echo the result of a
  function and call it from within backquotes.

6. Release Procedure
====================

* If you are a libtool maintainer, but have not yet registered your
  gpg public key and (preferred) email address with the FSF, send an
  email, preferably GPG-signed, to <ftp-upload@gnu.org> that includes
  the following:

    (a) name of package(s) that you are the maintainer for, and your
        preferred email address.

    (b) an ASCII armored copy of your GnuPG key, as an attachment.
	("gpg --export -a YOUR_KEY_ID > mykey.asc" should give you
	this.)

  When you have received acknowledgement of your message, the proper GPG
  keys will be registered on ftp-upload.gnu.org and only then will you be
  authorized to upload files to the FSF ftp machines.

* Make sure you have a copy of xdelta installed, and a copy of the previous
  release tarball in the build directory.

* Update the version number in configure.ac.
  See http://www.gnu.org/software/libtool/contribute.html for details of
  the numbering scheme.

* Update NEWS, ChangeLog.

* Make sure the 'Be Bourne compatible' shell snippet near the top of
  ./libtoolize.in, ./ltmain.in matches the latest autoconf wisdom by
  updating to match CVS autoconf AS_SHELL_SANITIZE in autoconf's
  lib/m4sugar/m4sh.m4.

* Run ./bootstrap.

* Have some tea.  If you are running on less than 3.6GHz CPU, order
  a pizza too ;-)

* Run ./configure and then make.

* Run `make -fMakefile.maint fetch', which will fetch new versions of the
  files that are maintained outside of libtool.

* Run ./commit.

* Run `make -fMakefile.maint cvs-dist' which will build a release tarball
  (with `make distcheck'), tag the tree with release-$(VERSION) and generate
  the gpg signature files.

* Run 'make -fMakefile.maint deltas' (pass LASTRELEASE=min.maj[.mic[alpha]]
  if needed) to create both diff and xdelta files between the previous
  release tarball and the new with detached gpg signature files and clear
  signed directive files.

* Upload release tarball, diff file and xdelta file, plus their associated
  detached gpg signature files and clear signed directive files to
  ftp-upload.gnu.org.  If the upload is destined for ftp.gnu.org, then the
  files should be placed in the /incoming/ftp directory.  If the upload is
  an alpha release destined for alpha.gnu.org, then the files should be
  placed in the /incoming/alpha directory.

* Send announcement to libtool@gnu.org and autotools-announce@gnu.org,
  if not an alpha send to info-gnu@gnu.org as well.

* Update version number in configure.ac to next alpha number.
  See http://www.gnu.org/software/libtool/contribute.html for details of
  the numbering scheme.

* Update NEWS, ChangeLog.

* Run ./commit.

* Update the webpages, libtool.html will need to indicate the latest
  release number and the news page should get a HTMLified copy of your
  release announcement.

* If not an alpha, replace manual.html with the new one
  (generate with `make -f Makefile.maint web-manual').



7. Alpha release note template
==============================

To: libtool@gnu.org, autotools-announce@gnu.org
Subject: GNU Libtool @VERSION@ released (alpha release).

The Libtool Team is pleased to announce alpha release @VERSION@ of GNU
Libtool.

GNU Libtool hides the complexity of using shared libraries behind a
consistent, portable interface. GNU Libtool ships with GNU libltdl,
which hides the complexity of loading dynamic runtime libraries
(modules) behind a consistent, portable interface.

Here are the compressed sources:

  ftp://alpha.gnu.org/gnu/libtool/libtool-@VERSION@.tar.gz
  ftp://alpha.gnu.org/gnu/libtool/libtool-@VERSION@.tar.bz2

Here are the xdeltas and diffs against libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@:

  ftp://alpha.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz
  ftp://alpha.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta

Here are the gpg detached signatures:

  ftp://alpha.gnu.org/gnu/libtool/libtool-@VERSION@.tar.gz.sig
  ftp://alpha.gnu.org/gnu/libtool/libtool-@VERSION@.tar.bz2.sig
  ftp://alpha.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz.sig
  ftp://alpha.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta.sig

Here are the MD5 and SHA1 checksums:

  @MD5SUM@ libtool-@VERSION@.tar.gz
  @MD5SUM@ libtool-@VERSION@.tar.bz2
  @MD5SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz
  @MD5SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta
  @SHA1SUM@ libtool-@VERSION@.tar.gz
  @SHA1SUM@ libtool-@VERSION@.tar.bz2
  @SHA1SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz
  @SHA1SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta

This release has @SUMMARY_OF_IMPROVEMENTS_SINCE_LAST_RELEASE_ON_THIS_BRANCH@.

This release was bootstrapped with @BOOTSTRAP_TOOLS_WITH_VERSIONS@,
but is useable with @COMPATIBLE_AUTOTOOL_VERSIONS@ in your own
projects.

Alternatively, you can fetch the unbootstrapped sourcecode from
anonymous cvs by using the following commands:

  $ export CVS_RSH=ssh
  $ cvs -z3 -d :ext:anoncvs@savannah.gnu.org:/cvsroot/libtool \
  co -r @CVS_RELEASE_TAG@ libtool

You will then need to have recent (possibly as yet unreleased) versions
of Automake and Autoconf installed to bootstrap the checked out
sources yourself.

New in @VERSION@: @RELEASE_DATE@

  @EXCERPT_FROM_NEWS_FILE@

Please report bugs to <bug-libtool@gnu.org>, along with the verbose
output of any failed test groups, and the output from `./libtool --help.'



8. Full release note template
=============================

To: info-gnu@gnu.org
Cc: libtool@gnu.org, autotools-announce@gnu.org
Subject: GNU Libtool @VERSION@ released.

The Libtool Team is pleased to announce the release of GNU Libtool
@VERSION@.

GNU Libtool hides the complexity of using shared libraries behind a
consistent, portable interface. GNU Libtool ships with GNU libltdl,
which hides the comlexity of loading dynamic runtime libraries
(modules) behind a consistent, portable interface.

This release has @SUMMARY_OF_IMPROVEMENTS_SINCE_LAST_RELEASE_ON_THIS_BRANCH@.

New in @VERSION@: @RELEASE_DATE@

  @EXCERPT_FROM_NEWS_FILE@

libtool-@VERSION@ is available now from ftp.gnu.org, along with
diffs and xdeltas against libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@
that are also available from ftp.gnu.org.  Please
use a mirror to reduce stress on the main gnu machine:

  http://www.gnu.org/order/ftp.html

Here are the compressed sources:

  ftp://ftp.gnu.org/gnu/libtool/libtool-@VERSION@.tar.gz
  ftp://ftp.gnu.org/gnu/libtool/libtool-@VERSION@.tar.bz2

Here are the xdeltas and diffs against libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@:

  ftp://ftp.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz
  ftp://ftp.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta

Here are the gpg detached signatures:

  ftp://ftp.gnu.org/gnu/libtool/libtool-@VERSION@.tar.gz.sig
  ftp://ftp.gnu.org/gnu/libtool/libtool-@VERSION@.tar.bz2.sig
  ftp://ftp.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz.sig
  ftp://ftp.gnu.org/gnu/libtool/libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta.sig

Here are the MD5 and SHA1 checksums:

  @MD5SUM@ libtool-@VERSION@.tar.gz
  @MD5SUM@ libtool-@VERSION@.tar.bz2
  @MD5SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz
  @MD5SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta
  @SHA1SUM@ libtool-@VERSION@.tar.gz
  @SHA1SUM@ libtool-@VERSION@.tar.bz2
  @SHA1SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.diff.gz
  @SHA1SUM@ libtool-@PREV_RELEASE_VERSION_ON_THIS_BRANCH@-@VERSION@.xdelta

This release was bootstrapped with @BOOTSTRAP_TOOLS_WITH_VERSIONS@,
but is useable with @COMPATIBLE_AUTOTOOL_VERSIONS@ in your own
projects.

Alternatively, you can fetch the unbootstrapped sourcecode from
anonymous cvs by using the following commands (just hit return when
you are prompted for the password):

  $ export CVS_RSH=ssh
  $ cvs -z3 -d :ext:anoncvs@savannah.gnu.org:/cvsroot/libtool \
  co -r @CVS_RELEASE_TAG@ libtool

You will then need to have the latest release versions of Automake
(@AUTOMAKE_VERSION@) and Autoconf (@AUTOCONF_VERSION@) installed to
bootstrap the checked out sources yourself.

Please report bugs to <bug-libtool@gnu.org>, along with the verbose
output of any failed test groups, and the output from `./libtool --help.'


-- 
Copyright (C) 2004 Free Software Foundation, Inc.

The canonical source of this file is maintained with the
GNU Libtool package.  Report bugs to bug-libtool@gnu.org.

GNU Libtool is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.

As a special exception to the GNU General Public License,
if you distribute this file as part of a program or library that
is built using GNU libtool, you may include it under the same
distribution terms that you use for the rest of that program.

GNU Libtool is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Libtool; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307  USA


Local Variables:
mode: text
fill-column: 72
End: