mirror of
https://github.com/HDFGroup/hdf5.git
synced 2024-11-27 02:10:55 +08:00
d6e767c21d
Add work-around to allow reading files that were produced with a buggy earlier version of the library, which could create objects with the wrong object header message count. There is now a configure flag "--enable-strict-format-checks" which triggers a failure on reading a file with this sort of corruption (when enabled) and allows the object to be read (when disabled). The default value for the "strict-format-checks" flag is yes when the "debug" flag is enabled and no when the "debug" flag is disabled. Note that if strict format checks are disabled (allowing objects with this particular kind of corruption to be read) and the file is opened with write access, the library will re-write the object header for the corrupt object with the correct # of object header messages. This closes bugzilla bug #1010. Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
896 lines
30 KiB
Makefile
896 lines
30 KiB
Makefile
# Makefile.in generated by automake 1.10 from Makefile.am.
|
|
# @configure_input@
|
|
|
|
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
|
|
# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
|
|
# This Makefile.in is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
|
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
# PARTICULAR PURPOSE.
|
|
|
|
@SET_MAKE@
|
|
|
|
#
|
|
# Copyright by The HDF Group.
|
|
# Copyright by the Board of Trustees of the University of Illinois.
|
|
# All rights reserved.
|
|
#
|
|
# This file is part of HDF5. The full HDF5 copyright notice, including
|
|
# terms governing use, modification, and redistribution, is contained in
|
|
# the files COPYING and Copyright.html. COPYING can be found at the root
|
|
# of the source code distribution tree; Copyright.html can be found at the
|
|
# root level of an installed copy of the electronic HDF5 document set and
|
|
# is linked from the top-level documents page. It can also be found at
|
|
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
|
|
# access to either file, you may request a copy from help@hdfgroup.org.
|
|
#
|
|
# This makefile mostly just reinvokes make in the various subdirectories
|
|
# but does so in the correct order. You can alternatively invoke make from
|
|
# each subdirectory manually.
|
|
#
|
|
# Top-level HDF5 Makefile(.in)
|
|
|
|
# pmake has issues if variables are undefined. Solve this problem in
|
|
# top-level Makefile by defining .MAKEFLAGS target to -V before pmake can
|
|
# encounter any undefined variables.
|
|
# Automake resists putting anything but variable definitions first in
|
|
# a Makefile.in, so we'll put a placebo comment here and use sed in
|
|
# bin/reconfigure to turn it into the .MAKEFLAGS target. Sigh. -JL 2005
|
|
# Configure should set AM_MAKEFLAGS to -V to solve this problem in
|
|
# subdirectories.
|
|
# NOTE: This means that invoking pmake in a subdirectory will not work.
|
|
.MAKEFLAGS:@AM_MAKEFLAGS@
|
|
$(MAKE) all
|
|
|
|
VPATH = @srcdir@
|
|
pkgdatadir = $(datadir)/@PACKAGE@
|
|
pkglibdir = $(libdir)/@PACKAGE@
|
|
pkgincludedir = $(includedir)/@PACKAGE@
|
|
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
|
|
install_sh_DATA = $(install_sh) -c -m 644
|
|
install_sh_PROGRAM = $(install_sh) -c
|
|
install_sh_SCRIPT = $(install_sh) -c
|
|
INSTALL_HEADER = $(INSTALL_DATA)
|
|
transform = $(program_transform_name)
|
|
NORMAL_INSTALL = :
|
|
PRE_INSTALL = :
|
|
POST_INSTALL = :
|
|
NORMAL_UNINSTALL = :
|
|
PRE_UNINSTALL = :
|
|
POST_UNINSTALL = :
|
|
build_triplet = @build@
|
|
host_triplet = @host@
|
|
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
|
|
$(srcdir)/Makefile.in $(top_srcdir)/config/commence.am \
|
|
$(top_srcdir)/configure COPYING bin/COPYING bin/compile \
|
|
bin/config.guess bin/config.sub bin/depcomp bin/install-sh \
|
|
bin/ltmain.sh bin/missing bin/mkinstalldirs
|
|
subdir = .
|
|
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
|
am__aclocal_m4_deps = $(top_srcdir)/configure.in
|
|
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
|
|
$(ACLOCAL_M4)
|
|
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
|
|
configure.lineno config.status.lineno
|
|
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
|
|
CONFIG_HEADER = $(top_builddir)/src/H5config.h
|
|
CONFIG_CLEAN_FILES =
|
|
SOURCES =
|
|
DIST_SOURCES =
|
|
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
|
|
html-recursive info-recursive install-data-recursive \
|
|
install-dvi-recursive install-exec-recursive \
|
|
install-html-recursive install-info-recursive \
|
|
install-pdf-recursive install-ps-recursive install-recursive \
|
|
installcheck-recursive installdirs-recursive pdf-recursive \
|
|
ps-recursive uninstall-recursive
|
|
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
|
|
distclean-recursive maintainer-clean-recursive
|
|
ETAGS = etags
|
|
CTAGS = ctags
|
|
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
|
|
distdir = $(PACKAGE)-$(VERSION)
|
|
top_distdir = $(distdir)
|
|
am__remove_distdir = \
|
|
{ test ! -d $(distdir) \
|
|
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
|
|
&& rm -fr $(distdir); }; }
|
|
DIST_ARCHIVES = $(distdir).tar.gz
|
|
GZIP_ENV = --best
|
|
distuninstallcheck_listfiles = find . -type f -print
|
|
distcleancheck_listfiles = find . -type f -print
|
|
ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
|
|
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
|
|
AMTAR = @AMTAR@
|
|
AM_MAKEFLAGS = @AM_MAKEFLAGS@
|
|
AR = @AR@
|
|
|
|
# Set the paths for AFS installs of autotools for Linux machines
|
|
# Ideally, these tools should never be needed during the build.
|
|
AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
|
|
AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
|
|
AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
|
|
AWK = @AWK@
|
|
BYTESEX = @BYTESEX@
|
|
CC = @CC@
|
|
CCDEPMODE = @CCDEPMODE@
|
|
CC_VERSION = @CC_VERSION@
|
|
|
|
# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5,
|
|
# but which shouldn't be exported to h5cc for building other programs.
|
|
CFLAGS = @CFLAGS@ @H5_CFLAGS@
|
|
CLEARFILEBUF = @CLEARFILEBUF@
|
|
CONFIG_DATE = @CONFIG_DATE@
|
|
CONFIG_MODE = @CONFIG_MODE@
|
|
CONFIG_USER = @CONFIG_USER@
|
|
CPP = @CPP@
|
|
CPPFLAGS = @CPPFLAGS@ @H5_CPPFLAGS@
|
|
CXX = @CXX@
|
|
CXXCPP = @CXXCPP@
|
|
CXXDEPMODE = @CXXDEPMODE@
|
|
CXXFLAGS = @CXXFLAGS@ @H5_CXXFLAGS@
|
|
CYGPATH_W = @CYGPATH_W@
|
|
DEBUG_PKG = @DEBUG_PKG@
|
|
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
|
|
DEFS = @DEFS@
|
|
DEPDIR = @DEPDIR@
|
|
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
|
|
DYNAMIC_DIRS = @DYNAMIC_DIRS@
|
|
ECHO = @ECHO@
|
|
ECHO_C = @ECHO_C@
|
|
ECHO_N = @ECHO_N@
|
|
ECHO_T = @ECHO_T@
|
|
EGREP = @EGREP@
|
|
EXEEXT = @EXEEXT@
|
|
F77 = @F77@
|
|
|
|
# Make sure that these variables are exported to the Makefiles
|
|
F9XMODEXT = @F9XMODEXT@
|
|
F9XMODFLAG = @F9XMODFLAG@
|
|
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
|
|
FC = @FC@
|
|
FCFLAGS = @FCFLAGS@ @H5_FCFLAGS@
|
|
FCFLAGS_f90 = @FCFLAGS_f90@
|
|
FCLIBS = @FCLIBS@
|
|
FFLAGS = @FFLAGS@
|
|
FILTERS = @FILTERS@
|
|
FSEARCH_DIRS = @FSEARCH_DIRS@
|
|
GREP = @GREP@
|
|
H5_CFLAGS = @H5_CFLAGS@
|
|
H5_CPPFLAGS = @H5_CPPFLAGS@
|
|
H5_CXXFLAGS = @H5_CXXFLAGS@
|
|
H5_FCFLAGS = @H5_FCFLAGS@
|
|
H5_LONE_COLON = @H5_LONE_COLON@
|
|
H5_VERSION = @H5_VERSION@
|
|
HADDR_T = @HADDR_T@
|
|
HDF5_INTERFACES = @HDF5_INTERFACES@
|
|
HID_T = @HID_T@
|
|
HL = @HL@
|
|
HL_FOR = @HL_FOR@
|
|
HSIZET = @HSIZET@
|
|
HSIZE_T = @HSIZE_T@
|
|
HSSIZE_T = @HSSIZE_T@
|
|
INSTALL = @INSTALL@
|
|
INSTALL_DATA = @INSTALL_DATA@
|
|
INSTALL_PROGRAM = @INSTALL_PROGRAM@
|
|
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
|
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
|
|
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
|
|
LDFLAGS = @LDFLAGS@
|
|
LIBOBJS = @LIBOBJS@
|
|
LIBS = @LIBS@
|
|
LIBTOOL = @LIBTOOL@
|
|
LN_S = @LN_S@
|
|
LTLIBOBJS = @LTLIBOBJS@
|
|
LT_STATIC_EXEC = @LT_STATIC_EXEC@
|
|
MAINT = @MAINT@
|
|
MAKEINFO = @MAKEINFO@
|
|
MKDIR_P = @MKDIR_P@
|
|
MPE = @MPE@
|
|
MPI_GET_SIZE = @MPI_GET_SIZE@
|
|
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
|
|
OBJEXT = @OBJEXT@
|
|
PACKAGE = @PACKAGE@
|
|
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
|
|
PACKAGE_NAME = @PACKAGE_NAME@
|
|
PACKAGE_STRING = @PACKAGE_STRING@
|
|
PACKAGE_TARNAME = @PACKAGE_TARNAME@
|
|
PACKAGE_VERSION = @PACKAGE_VERSION@
|
|
PARALLEL = @PARALLEL@
|
|
PATH_SEPARATOR = @PATH_SEPARATOR@
|
|
PERL = @PERL@
|
|
PTHREAD = @PTHREAD@
|
|
RANLIB = @RANLIB@
|
|
ROOT = @ROOT@
|
|
RUNPARALLEL = @RUNPARALLEL@
|
|
RUNSERIAL = @RUNSERIAL@
|
|
R_INTEGER = @R_INTEGER@
|
|
R_LARGE = @R_LARGE@
|
|
SEARCH = @SEARCH@
|
|
SETX = @SETX@
|
|
SET_MAKE = @SET_MAKE@
|
|
|
|
# Hardcode SHELL to be /bin/sh. Most machines have this shell, and
|
|
# on at least one machine configure fails to detect its existence (janus).
|
|
# Also, when HDF5 is configured on one machine but run on another,
|
|
# configure's automatic SHELL detection may not work on the build machine.
|
|
SHELL = /bin/sh
|
|
SIZE_T = @SIZE_T@
|
|
STATIC_SHARED = @STATIC_SHARED@
|
|
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
|
|
STRIP = @STRIP@
|
|
TESTPARALLEL = @TESTPARALLEL@
|
|
TIME = @TIME@
|
|
TR = @TR@
|
|
TRACE_API = @TRACE_API@
|
|
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
|
|
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
|
|
USE_FILTER_NBIT = @USE_FILTER_NBIT@
|
|
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
|
|
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
|
|
USE_FILTER_SZIP = @USE_FILTER_SZIP@
|
|
USINGMEMCHECKER = @USINGMEMCHECKER@
|
|
VERSION = @VERSION@
|
|
abs_builddir = @abs_builddir@
|
|
abs_srcdir = @abs_srcdir@
|
|
abs_top_builddir = @abs_top_builddir@
|
|
abs_top_srcdir = @abs_top_srcdir@
|
|
ac_ct_CC = @ac_ct_CC@
|
|
ac_ct_CXX = @ac_ct_CXX@
|
|
ac_ct_F77 = @ac_ct_F77@
|
|
ac_ct_FC = @ac_ct_FC@
|
|
am__include = @am__include@
|
|
am__leading_dot = @am__leading_dot@
|
|
am__quote = @am__quote@
|
|
am__tar = @am__tar@
|
|
am__untar = @am__untar@
|
|
bindir = @bindir@
|
|
build = @build@
|
|
build_alias = @build_alias@
|
|
build_cpu = @build_cpu@
|
|
build_os = @build_os@
|
|
build_vendor = @build_vendor@
|
|
builddir = @builddir@
|
|
datadir = @datadir@
|
|
datarootdir = @datarootdir@
|
|
docdir = $(exec_prefix)/doc
|
|
dvidir = @dvidir@
|
|
exec_prefix = @exec_prefix@
|
|
host = @host@
|
|
host_alias = @host_alias@
|
|
host_cpu = @host_cpu@
|
|
host_os = @host_os@
|
|
host_vendor = @host_vendor@
|
|
htmldir = @htmldir@
|
|
|
|
# Install directories that automake doesn't know about
|
|
includedir = $(exec_prefix)/include
|
|
infodir = @infodir@
|
|
install_sh = @install_sh@
|
|
libdir = @libdir@
|
|
libexecdir = @libexecdir@
|
|
localedir = @localedir@
|
|
localstatedir = @localstatedir@
|
|
mandir = @mandir@
|
|
mkdir_p = @mkdir_p@
|
|
oldincludedir = @oldincludedir@
|
|
pdfdir = @pdfdir@
|
|
prefix = @prefix@
|
|
program_transform_name = @program_transform_name@
|
|
psdir = @psdir@
|
|
sbindir = @sbindir@
|
|
sharedstatedir = @sharedstatedir@
|
|
srcdir = @srcdir@
|
|
sysconfdir = @sysconfdir@
|
|
target_alias = @target_alias@
|
|
top_builddir = @top_builddir@
|
|
top_srcdir = @top_srcdir@
|
|
|
|
# Shell commands used in Makefiles
|
|
RM = rm -f
|
|
CP = cp
|
|
|
|
# Some machines need a command to run executables; this is that command
|
|
# so that our tests will run.
|
|
# We use RUNTESTS instead of RUNSERIAL directly because it may be that
|
|
# some tests need to be run with a different command. Older versions
|
|
# of the makefiles used the command
|
|
# $(LIBTOOL) --mode=execute
|
|
# in some directories, for instance.
|
|
RUNTESTS = $(RUNSERIAL)
|
|
|
|
# Libraries to link to while building
|
|
LIBHDF5 = $(top_builddir)/src/libhdf5.la
|
|
LIBH5TEST = $(top_builddir)/test/libh5test.la
|
|
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
|
|
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
|
|
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
|
|
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
|
|
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
|
|
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
|
|
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
|
|
|
|
# Scripts used to build examples
|
|
# If only shared libraries have been installed, have h5cc build examples with
|
|
# shared libraries instead of static libraries
|
|
H5CC = $(bindir)/h5cc
|
|
H5CC_PP = $(bindir)/h5pcc
|
|
H5FC = $(bindir)/h5fc
|
|
H5FC_PP = $(bindir)/h5pfc
|
|
H5CPP = $(bindir)/h5c++
|
|
|
|
# The trace script; this is used on source files from the C library to
|
|
# insert tracing macros.
|
|
TRACE = perl $(top_srcdir)/bin/trace
|
|
|
|
# .chkexe files are used to mark tests that have run successfully.
|
|
# .chklog files are output from those tests.
|
|
# *.clog are from the MPE option.
|
|
CHECK_CLEANFILES = *.chkexe *.chklog *.clog
|
|
@BUILD_PARALLEL_CONDITIONAL_FALSE@TESTPARALLEL_DIR =
|
|
|
|
# Define subdirectories to build.
|
|
# Add this directory to SUBDIRS so that examples get built after tools
|
|
# but before examples in extra interfaces (c++ and fortran).
|
|
# Since we're explicitly listing DIST_SUBDIRS, we also need to list
|
|
# directories that are only conditionally built (so that their Makefiles
|
|
# are cleaned as well).
|
|
# Note that `make clean' will not affect the examples or doc directories.
|
|
|
|
# Conditionals. These conditionals are defined during configure
|
|
# Define each variable to empty if it is not used to placate pmake
|
|
@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
|
|
@BUILD_CXX_CONDITIONAL_FALSE@CXX_DIR =
|
|
@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
|
|
@BUILD_FORTRAN_CONDITIONAL_FALSE@FORTRAN_DIR =
|
|
@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
|
|
@BUILD_HDF5_HL_CONDITIONAL_FALSE@HDF5_HL_DIR =
|
|
@BUILD_HDF5_HL_CONDITIONAL_TRUE@HDF5_HL_DIR = hl
|
|
SUBDIRS = src test $(TESTPARALLEL_DIR) tools . $(CXX_DIR) $(FORTRAN_DIR) \
|
|
$(HDF5_HL_DIR)
|
|
|
|
DIST_SUBDIRS = src test testpar tools . c++ fortran hl perform examples
|
|
|
|
# Some files generated during configure that should be cleaned
|
|
DISTCLEANFILES = config/stamp1 config/stamp2
|
|
all: all-recursive
|
|
|
|
.SUFFIXES:
|
|
am--refresh:
|
|
@:
|
|
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(am__configure_deps)
|
|
@for dep in $?; do \
|
|
case '$(am__configure_deps)' in \
|
|
*$$dep*) \
|
|
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
|
|
cd $(srcdir) && $(AUTOMAKE) --foreign \
|
|
&& exit 0; \
|
|
exit 1;; \
|
|
esac; \
|
|
done; \
|
|
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
|
|
cd $(top_srcdir) && \
|
|
$(AUTOMAKE) --foreign Makefile
|
|
.PRECIOUS: Makefile
|
|
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
|
|
@case '$?' in \
|
|
*config.status*) \
|
|
echo ' $(SHELL) ./config.status'; \
|
|
$(SHELL) ./config.status;; \
|
|
*) \
|
|
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
|
|
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
|
|
esac;
|
|
|
|
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
|
|
cd $(srcdir) && $(AUTOCONF)
|
|
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
|
|
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
|
|
|
|
mostlyclean-libtool:
|
|
-rm -f *.lo
|
|
|
|
clean-libtool:
|
|
-rm -rf .libs _libs
|
|
|
|
distclean-libtool:
|
|
-rm -f libtool
|
|
|
|
# This directory's subdirectories are mostly independent; you can cd
|
|
# into them and run `make' without going through this Makefile.
|
|
# To change the values of `make' variables: instead of editing Makefiles,
|
|
# (1) if the variable is set in `config.status', edit `config.status'
|
|
# (which will cause the Makefiles to be regenerated when you run `make');
|
|
# (2) otherwise, pass the desired values on the `make' command line.
|
|
$(RECURSIVE_TARGETS):
|
|
@failcom='exit 1'; \
|
|
for f in x $$MAKEFLAGS; do \
|
|
case $$f in \
|
|
*=* | --[!k]*);; \
|
|
*k*) failcom='fail=yes';; \
|
|
esac; \
|
|
done; \
|
|
dot_seen=no; \
|
|
target=`echo $@ | sed s/-recursive//`; \
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
echo "Making $$target in $$subdir"; \
|
|
if test "$$subdir" = "."; then \
|
|
dot_seen=yes; \
|
|
local_target="$$target-am"; \
|
|
else \
|
|
local_target="$$target"; \
|
|
fi; \
|
|
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
|
|| eval $$failcom; \
|
|
done; \
|
|
if test "$$dot_seen" = "no"; then \
|
|
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
|
fi; test -z "$$fail"
|
|
|
|
$(RECURSIVE_CLEAN_TARGETS):
|
|
@failcom='exit 1'; \
|
|
for f in x $$MAKEFLAGS; do \
|
|
case $$f in \
|
|
*=* | --[!k]*);; \
|
|
*k*) failcom='fail=yes';; \
|
|
esac; \
|
|
done; \
|
|
dot_seen=no; \
|
|
case "$@" in \
|
|
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
|
|
*) list='$(SUBDIRS)' ;; \
|
|
esac; \
|
|
rev=''; for subdir in $$list; do \
|
|
if test "$$subdir" = "."; then :; else \
|
|
rev="$$subdir $$rev"; \
|
|
fi; \
|
|
done; \
|
|
rev="$$rev ."; \
|
|
target=`echo $@ | sed s/-recursive//`; \
|
|
for subdir in $$rev; do \
|
|
echo "Making $$target in $$subdir"; \
|
|
if test "$$subdir" = "."; then \
|
|
local_target="$$target-am"; \
|
|
else \
|
|
local_target="$$target"; \
|
|
fi; \
|
|
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
|
|| eval $$failcom; \
|
|
done && test -z "$$fail"
|
|
tags-recursive:
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
|
done
|
|
ctags-recursive:
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
|
|
done
|
|
|
|
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) ' { files[$$0] = 1; } \
|
|
END { for (i in files) print i; }'`; \
|
|
mkid -fID $$unique
|
|
tags: TAGS
|
|
|
|
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
|
|
$(TAGS_FILES) $(LISP)
|
|
tags=; \
|
|
here=`pwd`; \
|
|
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
|
|
include_option=--etags-include; \
|
|
empty_fix=.; \
|
|
else \
|
|
include_option=--include; \
|
|
empty_fix=; \
|
|
fi; \
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
test ! -f $$subdir/TAGS || \
|
|
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
|
|
fi; \
|
|
done; \
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) ' { files[$$0] = 1; } \
|
|
END { for (i in files) print i; }'`; \
|
|
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
|
|
test -n "$$unique" || unique=$$empty_fix; \
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
$$tags $$unique; \
|
|
fi
|
|
ctags: CTAGS
|
|
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
|
|
$(TAGS_FILES) $(LISP)
|
|
tags=; \
|
|
here=`pwd`; \
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) ' { files[$$0] = 1; } \
|
|
END { for (i in files) print i; }'`; \
|
|
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|
|
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
|
|
$$tags $$unique
|
|
|
|
GTAGS:
|
|
here=`$(am__cd) $(top_builddir) && pwd` \
|
|
&& cd $(top_srcdir) \
|
|
&& gtags -i $(GTAGS_ARGS) $$here
|
|
|
|
distclean-tags:
|
|
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
|
|
|
|
distdir: $(DISTFILES)
|
|
$(am__remove_distdir)
|
|
test -d $(distdir) || mkdir $(distdir)
|
|
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
|
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
|
list='$(DISTFILES)'; \
|
|
dist_files=`for file in $$list; do echo $$file; done | \
|
|
sed -e "s|^$$srcdirstrip/||;t" \
|
|
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
|
|
case $$dist_files in \
|
|
*/*) $(MKDIR_P) `echo "$$dist_files" | \
|
|
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
|
|
sort -u` ;; \
|
|
esac; \
|
|
for file in $$dist_files; do \
|
|
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
|
|
if test -d $$d/$$file; then \
|
|
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
|
|
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
|
|
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
|
|
fi; \
|
|
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
|
|
else \
|
|
test -f $(distdir)/$$file \
|
|
|| cp -p $$d/$$file $(distdir)/$$file \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
test -d "$(distdir)/$$subdir" \
|
|
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|
|
|| exit 1; \
|
|
distdir=`$(am__cd) $(distdir) && pwd`; \
|
|
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
|
|
(cd $$subdir && \
|
|
$(MAKE) $(AM_MAKEFLAGS) \
|
|
top_distdir="$$top_distdir" \
|
|
distdir="$$distdir/$$subdir" \
|
|
am__remove_distdir=: \
|
|
am__skip_length_check=: \
|
|
distdir) \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
|
|
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
|
|
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
|
|
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|
|
|| chmod -R a+r $(distdir)
|
|
dist-gzip: distdir
|
|
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
|
|
$(am__remove_distdir)
|
|
|
|
dist-bzip2: distdir
|
|
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
|
|
$(am__remove_distdir)
|
|
|
|
dist-tarZ: distdir
|
|
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
|
|
$(am__remove_distdir)
|
|
|
|
dist-shar: distdir
|
|
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
|
|
$(am__remove_distdir)
|
|
|
|
dist-zip: distdir
|
|
-rm -f $(distdir).zip
|
|
zip -rq $(distdir).zip $(distdir)
|
|
$(am__remove_distdir)
|
|
|
|
dist dist-all: distdir
|
|
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
|
|
$(am__remove_distdir)
|
|
|
|
# This target untars the dist file and tries a VPATH configuration. Then
|
|
# it guarantees that the distribution is self-contained by making another
|
|
# tarfile.
|
|
distcheck: dist
|
|
case '$(DIST_ARCHIVES)' in \
|
|
*.tar.gz*) \
|
|
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
|
|
*.tar.bz2*) \
|
|
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
|
|
*.tar.Z*) \
|
|
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
|
|
*.shar.gz*) \
|
|
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
|
|
*.zip*) \
|
|
unzip $(distdir).zip ;;\
|
|
esac
|
|
chmod -R a-w $(distdir); chmod a+w $(distdir)
|
|
mkdir $(distdir)/_build
|
|
mkdir $(distdir)/_inst
|
|
chmod a-w $(distdir)
|
|
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
|
|
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
|
|
&& cd $(distdir)/_build \
|
|
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
|
|
$(DISTCHECK_CONFIGURE_FLAGS) \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) check \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) install \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
|
|
distuninstallcheck \
|
|
&& chmod -R a-w "$$dc_install_base" \
|
|
&& ({ \
|
|
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
|
|
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
|
|
} || { rm -rf "$$dc_destdir"; exit 1; }) \
|
|
&& rm -rf "$$dc_destdir" \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) dist \
|
|
&& rm -rf $(DIST_ARCHIVES) \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
|
|
$(am__remove_distdir)
|
|
@(echo "$(distdir) archives ready for distribution: "; \
|
|
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
|
|
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
|
|
distuninstallcheck:
|
|
@cd $(distuninstallcheck_dir) \
|
|
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|
|
|| { echo "ERROR: files left after uninstall:" ; \
|
|
if test -n "$(DESTDIR)"; then \
|
|
echo " (check DESTDIR support)"; \
|
|
fi ; \
|
|
$(distuninstallcheck_listfiles) ; \
|
|
exit 1; } >&2
|
|
distcleancheck: distclean
|
|
@if test '$(srcdir)' = . ; then \
|
|
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
|
|
exit 1 ; \
|
|
fi
|
|
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|
|
|| { echo "ERROR: files left in build directory after distclean:" ; \
|
|
$(distcleancheck_listfiles) ; \
|
|
exit 1; } >&2
|
|
check-am: all-am
|
|
check: check-recursive
|
|
all-am: Makefile all-local
|
|
installdirs: installdirs-recursive
|
|
installdirs-am:
|
|
install: install-recursive
|
|
install-exec: install-exec-recursive
|
|
install-data: install-data-recursive
|
|
uninstall: uninstall-recursive
|
|
|
|
install-am: all-am
|
|
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
|
|
|
installcheck: installcheck-recursive
|
|
install-strip:
|
|
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
|
|
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
|
|
`test -z '$(STRIP)' || \
|
|
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
|
|
mostlyclean-generic:
|
|
|
|
clean-generic:
|
|
|
|
distclean-generic:
|
|
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
|
|
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
|
|
|
|
maintainer-clean-generic:
|
|
@echo "This command is intended for maintainers to use"
|
|
@echo "it deletes files that may require special tools to rebuild."
|
|
clean: clean-recursive
|
|
|
|
clean-am: clean-generic clean-libtool mostlyclean-am
|
|
|
|
distclean: distclean-recursive
|
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
|
|
-rm -f Makefile
|
|
distclean-am: clean-am distclean-generic distclean-libtool \
|
|
distclean-tags
|
|
|
|
dvi: dvi-recursive
|
|
|
|
dvi-am:
|
|
|
|
html: html-recursive
|
|
|
|
info: info-recursive
|
|
|
|
info-am:
|
|
|
|
install-data-am:
|
|
|
|
install-dvi: install-dvi-recursive
|
|
|
|
install-exec-am: install-exec-local
|
|
|
|
install-html: install-html-recursive
|
|
|
|
install-info: install-info-recursive
|
|
|
|
install-man:
|
|
|
|
install-pdf: install-pdf-recursive
|
|
|
|
install-ps: install-ps-recursive
|
|
|
|
installcheck-am: installcheck-local
|
|
|
|
maintainer-clean: maintainer-clean-recursive
|
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
|
|
-rm -rf $(top_srcdir)/autom4te.cache
|
|
-rm -f Makefile
|
|
maintainer-clean-am: distclean-am maintainer-clean-generic
|
|
|
|
mostlyclean: mostlyclean-recursive
|
|
|
|
mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
|
|
mostlyclean-local
|
|
|
|
pdf: pdf-recursive
|
|
|
|
pdf-am:
|
|
|
|
ps: ps-recursive
|
|
|
|
ps-am:
|
|
|
|
uninstall-am: uninstall-local
|
|
|
|
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
|
|
install-strip
|
|
|
|
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
|
|
all all-am all-local am--refresh check check-am clean \
|
|
clean-generic clean-libtool ctags ctags-recursive dist \
|
|
dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
|
|
distcheck distclean distclean-generic distclean-libtool \
|
|
distclean-tags distcleancheck distdir distuninstallcheck dvi \
|
|
dvi-am html html-am info info-am install install-am \
|
|
install-data install-data-am install-dvi install-dvi-am \
|
|
install-exec install-exec-am install-exec-local install-html \
|
|
install-html-am install-info install-info-am install-man \
|
|
install-pdf install-pdf-am install-ps install-ps-am \
|
|
install-strip installcheck installcheck-am installcheck-local \
|
|
installdirs installdirs-am maintainer-clean \
|
|
maintainer-clean-generic mostlyclean mostlyclean-generic \
|
|
mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
|
|
tags-recursive uninstall uninstall-am uninstall-local
|
|
|
|
|
|
# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
|
|
# This tells the Makefiles that these targets are not files to be built but
|
|
# commands that should be executed even if a file with the same name already
|
|
# exists.
|
|
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
|
|
build-tests check-clean check-install check-p check-s check-vfd \
|
|
install-doc lib progs tests uninstall-doc _exec_check-s _test help
|
|
|
|
help:
|
|
@$(top_srcdir)/bin/makehelp
|
|
|
|
# Define rules for lib, progs, check, and tests.
|
|
# These simply involve recursing into subdirectories.
|
|
test _test: check
|
|
|
|
lib progs check-p check-s:
|
|
@@SETX@; for d in $(SUBDIRS); do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Make all, tests, and (un)install also recurse into perform directory
|
|
all-local:
|
|
@cd perform && $(MAKE) $(AM_MAKEFLAGS) all
|
|
|
|
tests:
|
|
@@SETX@; for d in $(SUBDIRS) perform; do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
install-exec-local:
|
|
@cd perform && $(MAKE) $(AM_MAKEFLAGS) install
|
|
uninstall-local:
|
|
@cd perform && $(MAKE) $(AM_MAKEFLAGS) uninstall
|
|
|
|
# Check-clean also recurses into examples directory
|
|
check-clean:
|
|
@@SETX@; for d in $(SUBDIRS) examples perform; do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Some C++ compilers/linkers will create a directory named ii_files in
|
|
# the root directory, which should be cleaned.
|
|
mostlyclean-local:
|
|
if test -d ii_files; then \
|
|
$(RM) -rf ii_files; \
|
|
fi
|
|
|
|
# 'make install-all' also installs examples
|
|
install-all:
|
|
@$(MAKE) $(AM_MAKEFLAGS) install
|
|
@$(MAKE) $(AM_MAKEFLAGS) install-examples
|
|
uninstall-all:
|
|
@$(MAKE) $(AM_MAKEFLAGS) uninstall
|
|
@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
|
|
|
|
# Install examples in this directory and recursively
|
|
install-examples uninstall-examples:
|
|
@@SETX@; for d in examples $(HDF5_INTERFACES); do \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
done
|
|
|
|
# Placeholder to remind users that docs are now in a separate repository.
|
|
install-doc:
|
|
@echo "docs no longer live in this tree. Use install-examples to install examples."
|
|
|
|
uninstall-doc:
|
|
@echo "docs no longer live in this tree. Use install-examples to install examples."
|
|
|
|
# `make check-install' or `make installcheck' checks that examples can
|
|
# be successfully built
|
|
installcheck-local:
|
|
@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
|
|
|
|
# check-install is just a synonym for installcheck
|
|
check-install: installcheck
|
|
|
|
# Only source files in the src directory include tracing information,
|
|
# so 'make trace' only needs to recurse into that directory.
|
|
trace:
|
|
@(cd src && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
|
|
|
|
# Run tests with different Virtual File Drivers.
|
|
# Currently, only invoke check-vfd in the test directory.
|
|
check-vfd:
|
|
@@SETX@; for d in src test; do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Automake wants to make config.status depend on configure. This
|
|
# makes sense, but config.status can't always be regenerated
|
|
# properly, which can cause builds to fail.
|
|
# This is a problem for our Daily Tests, which need to be able to
|
|
# 'make distclean' reliably before running configure.
|
|
# The simple solution is to override the dependency Automake supplies
|
|
# for config.status so that it will never be regenerated.
|
|
$(top_builddir)/config.status:
|
|
|
|
# Don't include conclude.am in root Makefile; tests target needs to
|
|
# recurse into perform directory as well as reguar subdirs.
|
|
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
|
# Otherwise a system limit (for SysV at least) may be exceeded.
|
|
.NOEXPORT:
|