mirror of
https://github.com/HDFGroup/hdf5.git
synced 2024-11-27 02:10:55 +08:00
98362b664c
General shared library improvements for CYGWIN / AIX
Description:
Shared libraries are disabled on both CYGWIN and AIX due
to inability to build them correctly. Part of the problem
in both of these situations is the lack of the libtool
flag -no-undefined, which tells libtool that all needed
symbols are defined at link time (a requirement on these
systems) and that it's okay to build shared libraries.
Another problem are lack of dependencies between wrapper
libraries and core C HDF5 library.
This patch addresses both of these by fixing configure to
add in -no-undefined flag for libtool during linking and
adds automake dependencies in the Makefile.am files.
After testing, both CYGWIN and AIX now generate shared
libraries, but there are still some test failures in each.
(cache_api, dt_arith, and testerror.sh on CYGWIN, and
fortran tests on AIX).
Even though the shared libraries are not quite perfect,
this is a general improvement to what we had before, so
I'm applying the patch anyways. Note that default behavior
of shared libraries on these systems being disabled has
NOT been changed and requires the use of the
--enable-unsupported to attempt to build them.
We will need to address the test failures in each
architecture prior to formally supporting shared
libraries on each.
Tested:
h5committested & CYGWIN tested (on bangan)
(AIX tested by Albert on bp-login2)
997 lines
34 KiB
Makefile
Executable File
997 lines
34 KiB
Makefile
Executable File
# Makefile.in generated by automake 1.11.1 from Makefile.am.
|
|
# @configure_input@
|
|
|
|
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
|
|
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
|
|
# Inc.
|
|
# This Makefile.in is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
|
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
# PARTICULAR PURPOSE.
|
|
|
|
@SET_MAKE@
|
|
|
|
#
|
|
# Copyright by The HDF Group.
|
|
# Copyright by the Board of Trustees of the University of Illinois.
|
|
# All rights reserved.
|
|
#
|
|
# This file is part of HDF5. The full HDF5 copyright notice, including
|
|
# terms governing use, modification, and redistribution, is contained in
|
|
# the files COPYING and Copyright.html. COPYING can be found at the root
|
|
# of the source code distribution tree; Copyright.html can be found at the
|
|
# root level of an installed copy of the electronic HDF5 document set and
|
|
# is linked from the top-level documents page. It can also be found at
|
|
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
|
|
# access to either file, you may request a copy from help@hdfgroup.org.
|
|
#
|
|
#
|
|
# This makefile mostly just reinvokes make in the various subdirectories
|
|
# but does so in the correct order. You can alternatively invoke make from
|
|
# each subdirectory manually.
|
|
#
|
|
# HDF5 High-Level Makefile(.in)
|
|
VPATH = @srcdir@
|
|
pkgdatadir = $(datadir)/@PACKAGE@
|
|
pkgincludedir = $(includedir)/@PACKAGE@
|
|
pkglibdir = $(libdir)/@PACKAGE@
|
|
pkglibexecdir = $(libexecdir)/@PACKAGE@
|
|
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
|
|
install_sh_DATA = $(install_sh) -c -m 644
|
|
install_sh_PROGRAM = $(install_sh) -c
|
|
install_sh_SCRIPT = $(install_sh) -c
|
|
INSTALL_HEADER = $(INSTALL_DATA)
|
|
transform = $(program_transform_name)
|
|
NORMAL_INSTALL = :
|
|
PRE_INSTALL = :
|
|
POST_INSTALL = :
|
|
NORMAL_UNINSTALL = :
|
|
PRE_UNINSTALL = :
|
|
POST_UNINSTALL = :
|
|
build_triplet = @build@
|
|
host_triplet = @host@
|
|
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
|
|
$(top_srcdir)/config/commence.am \
|
|
$(top_srcdir)/config/conclude.am COPYING
|
|
TESTS =
|
|
subdir = hl
|
|
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
|
am__aclocal_m4_deps = $(top_srcdir)/configure.in
|
|
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
|
|
$(ACLOCAL_M4)
|
|
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
|
|
CONFIG_HEADER = $(top_builddir)/src/H5config.h
|
|
CONFIG_CLEAN_FILES =
|
|
CONFIG_CLEAN_VPATH_FILES =
|
|
AM_V_GEN = $(am__v_GEN_$(V))
|
|
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
|
|
am__v_GEN_0 = @echo " GEN " $@;
|
|
AM_V_at = $(am__v_at_$(V))
|
|
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
|
|
am__v_at_0 = @
|
|
SOURCES =
|
|
DIST_SOURCES =
|
|
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
|
|
html-recursive info-recursive install-data-recursive \
|
|
install-dvi-recursive install-exec-recursive \
|
|
install-html-recursive install-info-recursive \
|
|
install-pdf-recursive install-ps-recursive install-recursive \
|
|
installcheck-recursive installdirs-recursive pdf-recursive \
|
|
ps-recursive uninstall-recursive
|
|
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
|
|
distclean-recursive maintainer-clean-recursive
|
|
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
|
|
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
|
|
distdir
|
|
ETAGS = etags
|
|
CTAGS = ctags
|
|
am__tty_colors = \
|
|
red=; grn=; lgn=; blu=; std=
|
|
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
|
|
am__relativize = \
|
|
dir0=`pwd`; \
|
|
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
|
|
sed_rest='s,^[^/]*/*,,'; \
|
|
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
|
|
sed_butlast='s,/*[^/]*$$,,'; \
|
|
while test -n "$$dir1"; do \
|
|
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
|
|
if test "$$first" != "."; then \
|
|
if test "$$first" = ".."; then \
|
|
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
|
|
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
|
|
else \
|
|
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
|
|
if test "$$first2" = "$$first"; then \
|
|
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
|
|
else \
|
|
dir2="../$$dir2"; \
|
|
fi; \
|
|
dir0="$$dir0"/"$$first"; \
|
|
fi; \
|
|
fi; \
|
|
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
|
|
done; \
|
|
reldir="$$dir2"
|
|
ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
|
|
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
|
|
AMTAR = @AMTAR@
|
|
|
|
# H5_CFLAGS holds flags that should be used when building hdf5,
|
|
# but which should not be exported to h5cc for building other programs.
|
|
# AM_CFLAGS is an automake construct which should be used by Makefiles
|
|
# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
|
|
# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
|
|
AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
|
|
AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
|
|
AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
|
|
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
|
|
AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
|
|
AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
|
|
AM_MAKEFLAGS = @AM_MAKEFLAGS@
|
|
AR = @AR@
|
|
AS = @AS@
|
|
|
|
# Set the paths for AFS installs of autotools for Linux machines
|
|
# Ideally, these tools should never be needed during the build.
|
|
AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
|
|
AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
|
|
AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
|
|
AWK = @AWK@
|
|
BYTESEX = @BYTESEX@
|
|
CC = @CC@
|
|
CCDEPMODE = @CCDEPMODE@
|
|
CC_VERSION = @CC_VERSION@
|
|
CFLAGS = @CFLAGS@
|
|
CLEARFILEBUF = @CLEARFILEBUF@
|
|
CODESTACK = @CODESTACK@
|
|
CONFIG_DATE = @CONFIG_DATE@
|
|
CONFIG_MODE = @CONFIG_MODE@
|
|
CONFIG_USER = @CONFIG_USER@
|
|
CPP = @CPP@
|
|
CPPFLAGS = @CPPFLAGS@
|
|
CXX = @CXX@
|
|
CXXCPP = @CXXCPP@
|
|
CXXDEPMODE = @CXXDEPMODE@
|
|
CXXFLAGS = @CXXFLAGS@
|
|
CXX_VERSION = @CXX_VERSION@
|
|
CYGPATH_W = @CYGPATH_W@
|
|
DEBUG_PKG = @DEBUG_PKG@
|
|
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
|
|
DEFS = @DEFS@
|
|
DEPDIR = @DEPDIR@
|
|
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
|
|
DIRECT_VFD = @DIRECT_VFD@
|
|
DLLTOOL = @DLLTOOL@
|
|
DSYMUTIL = @DSYMUTIL@
|
|
DUMPBIN = @DUMPBIN@
|
|
DYNAMIC_DIRS = @DYNAMIC_DIRS@
|
|
ECHO_C = @ECHO_C@
|
|
ECHO_N = @ECHO_N@
|
|
ECHO_T = @ECHO_T@
|
|
EGREP = @EGREP@
|
|
EXEEXT = @EXEEXT@
|
|
EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
|
|
|
|
# Make sure that these variables are exported to the Makefiles
|
|
F9XMODEXT = @F9XMODEXT@
|
|
F9XMODFLAG = @F9XMODFLAG@
|
|
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
|
|
FC = @FC@
|
|
FCFLAGS = @FCFLAGS@
|
|
FCFLAGS_f90 = @FCFLAGS_f90@
|
|
FCLIBS = @FCLIBS@
|
|
FC_VERSION = @FC_VERSION@
|
|
FGREP = @FGREP@
|
|
FILTERS = @FILTERS@
|
|
FSEARCH_DIRS = @FSEARCH_DIRS@
|
|
GPFS = @GPFS@
|
|
GREP = @GREP@
|
|
H5_CFLAGS = @H5_CFLAGS@
|
|
H5_CPPFLAGS = @H5_CPPFLAGS@
|
|
H5_CXXFLAGS = @H5_CXXFLAGS@
|
|
H5_CXX_SHARED = @H5_CXX_SHARED@
|
|
H5_FCFLAGS = @H5_FCFLAGS@
|
|
H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
|
|
H5_LDFLAGS = @H5_LDFLAGS@
|
|
H5_LONE_COLON = @H5_LONE_COLON@
|
|
H5_VERSION = @H5_VERSION@
|
|
HADDR_T = @HADDR_T@
|
|
HAVE_DMALLOC = @HAVE_DMALLOC@
|
|
HDF5_HL = @HDF5_HL@
|
|
HDF5_INTERFACES = @HDF5_INTERFACES@
|
|
HDF_CXX = @HDF_CXX@
|
|
HDF_FORTRAN = @HDF_FORTRAN@
|
|
HID_T = @HID_T@
|
|
HL = @HL@
|
|
HL_FOR = @HL_FOR@
|
|
HSIZE_T = @HSIZE_T@
|
|
HSSIZE_T = @HSSIZE_T@
|
|
INSTALL = @INSTALL@
|
|
INSTALL_DATA = @INSTALL_DATA@
|
|
INSTALL_PROGRAM = @INSTALL_PROGRAM@
|
|
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
|
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
|
|
INSTRUMENT = @INSTRUMENT@
|
|
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
|
|
LARGEFILE = @LARGEFILE@
|
|
LD = @LD@
|
|
LDFLAGS = @LDFLAGS@
|
|
LIBOBJS = @LIBOBJS@
|
|
LIBS = @LIBS@
|
|
LIBTOOL = @LIBTOOL@
|
|
LIPO = @LIPO@
|
|
LL_PATH = @LL_PATH@
|
|
LN_S = @LN_S@
|
|
LTLIBOBJS = @LTLIBOBJS@
|
|
LT_STATIC_EXEC = @LT_STATIC_EXEC@
|
|
MAINT = @MAINT@
|
|
MAKEINFO = @MAKEINFO@
|
|
MANIFEST_TOOL = @MANIFEST_TOOL@
|
|
MKDIR_P = @MKDIR_P@
|
|
MPE = @MPE@
|
|
MPI_GET_SIZE = @MPI_GET_SIZE@
|
|
NM = @NM@
|
|
NMEDIT = @NMEDIT@
|
|
OBJDUMP = @OBJDUMP@
|
|
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
|
|
OBJEXT = @OBJEXT@
|
|
OTOOL = @OTOOL@
|
|
OTOOL64 = @OTOOL64@
|
|
PACKAGE = @PACKAGE@
|
|
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
|
|
PACKAGE_NAME = @PACKAGE_NAME@
|
|
PACKAGE_STRING = @PACKAGE_STRING@
|
|
PACKAGE_TARNAME = @PACKAGE_TARNAME@
|
|
PACKAGE_URL = @PACKAGE_URL@
|
|
PACKAGE_VERSION = @PACKAGE_VERSION@
|
|
PARALLEL = @PARALLEL@
|
|
PATH_SEPARATOR = @PATH_SEPARATOR@
|
|
PERL = @PERL@
|
|
PTHREAD = @PTHREAD@
|
|
RANLIB = @RANLIB@
|
|
ROOT = @ROOT@
|
|
RUNPARALLEL = @RUNPARALLEL@
|
|
RUNSERIAL = @RUNSERIAL@
|
|
R_INTEGER = @R_INTEGER@
|
|
R_LARGE = @R_LARGE@
|
|
SEARCH = @SEARCH@
|
|
SED = @SED@
|
|
SETX = @SETX@
|
|
SET_MAKE = @SET_MAKE@
|
|
SHELL = @SHELL@
|
|
SIZE_T = @SIZE_T@
|
|
STATIC_EXEC = @STATIC_EXEC@
|
|
STATIC_SHARED = @STATIC_SHARED@
|
|
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
|
|
STRIP = @STRIP@
|
|
TESTPARALLEL = @TESTPARALLEL@
|
|
THREADSAFE = @THREADSAFE@
|
|
TIME = @TIME@
|
|
TR = @TR@
|
|
TRACE_API = @TRACE_API@
|
|
UNAME_INFO = @UNAME_INFO@
|
|
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
|
|
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
|
|
USE_FILTER_NBIT = @USE_FILTER_NBIT@
|
|
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
|
|
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
|
|
USE_FILTER_SZIP = @USE_FILTER_SZIP@
|
|
USINGMEMCHECKER = @USINGMEMCHECKER@
|
|
VERSION = @VERSION@
|
|
WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
|
|
abs_builddir = @abs_builddir@
|
|
abs_srcdir = @abs_srcdir@
|
|
abs_top_builddir = @abs_top_builddir@
|
|
abs_top_srcdir = @abs_top_srcdir@
|
|
ac_ct_AR = @ac_ct_AR@
|
|
ac_ct_CC = @ac_ct_CC@
|
|
ac_ct_CXX = @ac_ct_CXX@
|
|
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
|
|
ac_ct_FC = @ac_ct_FC@
|
|
am__include = @am__include@
|
|
am__leading_dot = @am__leading_dot@
|
|
am__quote = @am__quote@
|
|
am__tar = @am__tar@
|
|
am__untar = @am__untar@
|
|
bindir = @bindir@
|
|
build = @build@
|
|
build_alias = @build_alias@
|
|
build_cpu = @build_cpu@
|
|
build_os = @build_os@
|
|
build_vendor = @build_vendor@
|
|
builddir = @builddir@
|
|
datadir = @datadir@
|
|
datarootdir = @datarootdir@
|
|
|
|
# Install directories that automake doesn't know about
|
|
docdir = $(exec_prefix)/doc
|
|
dvidir = @dvidir@
|
|
enable_shared = @enable_shared@
|
|
enable_static = @enable_static@
|
|
exec_prefix = @exec_prefix@
|
|
host = @host@
|
|
host_alias = @host_alias@
|
|
host_cpu = @host_cpu@
|
|
host_os = @host_os@
|
|
host_vendor = @host_vendor@
|
|
htmldir = @htmldir@
|
|
includedir = @includedir@
|
|
infodir = @infodir@
|
|
install_sh = @install_sh@
|
|
libdir = @libdir@
|
|
libexecdir = @libexecdir@
|
|
localedir = @localedir@
|
|
localstatedir = @localstatedir@
|
|
mandir = @mandir@
|
|
mkdir_p = @mkdir_p@
|
|
oldincludedir = @oldincludedir@
|
|
pdfdir = @pdfdir@
|
|
prefix = @prefix@
|
|
program_transform_name = @program_transform_name@
|
|
psdir = @psdir@
|
|
sbindir = @sbindir@
|
|
sharedstatedir = @sharedstatedir@
|
|
srcdir = @srcdir@
|
|
sysconfdir = @sysconfdir@
|
|
target_alias = @target_alias@
|
|
top_build_prefix = @top_build_prefix@
|
|
top_builddir = @top_builddir@
|
|
top_srcdir = @top_srcdir@
|
|
|
|
# Shell commands used in Makefiles
|
|
RM = rm -f
|
|
CP = cp
|
|
|
|
# Some machines need a command to run executables; this is that command
|
|
# so that our tests will run.
|
|
# We use RUNEXEC instead of RUNSERIAL directly because it may be that
|
|
# some tests need to be run with a different command. Older versions
|
|
# of the makefiles used the command
|
|
# $(LIBTOOL) --mode=execute
|
|
# in some directories, for instance.
|
|
RUNEXEC = $(RUNSERIAL)
|
|
|
|
# Libraries to link to while building
|
|
LIBHDF5 = $(top_builddir)/src/libhdf5.la
|
|
LIBH5TEST = $(top_builddir)/test/libh5test.la
|
|
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
|
|
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
|
|
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
|
|
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
|
|
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
|
|
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
|
|
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
|
|
|
|
# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
|
|
# has been removed. According to the official description of DESTDIR by Gnu at
|
|
# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
|
|
# prepended to the normal and complete install path that it precedes for the
|
|
# purpose of installing in a temporary directory which is useful for building
|
|
# rpms and other packages. The '/' after ${DESTDIR} will be followed by another
|
|
# '/' at the beginning of the normal install path. When DESTDIR is empty the
|
|
# path then begins with '//', which is incorrect and causes problems at least for
|
|
# Cygwin.
|
|
|
|
# Scripts used to build examples
|
|
# If only shared libraries have been installed, have h5cc build examples with
|
|
# shared libraries instead of static libraries
|
|
H5CC = ${DESTDIR}$(bindir)/h5cc
|
|
H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
|
|
H5FC = ${DESTDIR}$(bindir)/h5fc
|
|
H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
|
|
H5CPP = ${DESTDIR}$(bindir)/h5c++
|
|
ACLOCAL_AMFLAGS = "-I m4"
|
|
|
|
# The trace script; this is used on source files from the C library to
|
|
# insert tracing macros.
|
|
TRACE = perl $(top_srcdir)/bin/trace
|
|
|
|
# .chkexe files are used to mark tests that have run successfully.
|
|
# .chklog files are output from those tests.
|
|
# *.clog are from the MPE option.
|
|
CHECK_CLEANFILES = *.chkexe *.chklog *.clog
|
|
@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
|
|
@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
|
|
@BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test tools $(CXX_DIR) $(FORTRAN_DIR)
|
|
DIST_SUBDIRS = src test tools c++ fortran examples
|
|
|
|
# Automake needs to be taught how to build lib, progs, and tests targets.
|
|
# These will be filled in automatically for the most part (e.g.,
|
|
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
|
|
# EXTRA_TEST variables are supplied to allow the user to force targets to
|
|
# be built at certain times.
|
|
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
|
|
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
|
|
|
|
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
|
|
$(EXTRA_PROG)
|
|
|
|
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
|
|
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
|
|
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
|
|
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
|
|
all: all-recursive
|
|
|
|
.SUFFIXES:
|
|
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
|
|
@for dep in $?; do \
|
|
case '$(am__configure_deps)' in \
|
|
*$$dep*) \
|
|
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
|
|
&& { if test -f $@; then exit 0; else break; fi; }; \
|
|
exit 1;; \
|
|
esac; \
|
|
done; \
|
|
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/Makefile'; \
|
|
$(am__cd) $(top_srcdir) && \
|
|
$(AUTOMAKE) --foreign hl/Makefile
|
|
.PRECIOUS: Makefile
|
|
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
|
|
@case '$?' in \
|
|
*config.status*) \
|
|
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
|
|
*) \
|
|
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
|
|
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
|
|
esac;
|
|
|
|
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
|
|
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
|
|
|
|
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
|
|
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
|
|
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
|
|
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
|
|
$(am__aclocal_m4_deps):
|
|
|
|
mostlyclean-libtool:
|
|
-rm -f *.lo
|
|
|
|
clean-libtool:
|
|
-rm -rf .libs _libs
|
|
|
|
# This directory's subdirectories are mostly independent; you can cd
|
|
# into them and run `make' without going through this Makefile.
|
|
# To change the values of `make' variables: instead of editing Makefiles,
|
|
# (1) if the variable is set in `config.status', edit `config.status'
|
|
# (which will cause the Makefiles to be regenerated when you run `make');
|
|
# (2) otherwise, pass the desired values on the `make' command line.
|
|
$(RECURSIVE_TARGETS):
|
|
@fail= failcom='exit 1'; \
|
|
for f in x $$MAKEFLAGS; do \
|
|
case $$f in \
|
|
*=* | --[!k]*);; \
|
|
*k*) failcom='fail=yes';; \
|
|
esac; \
|
|
done; \
|
|
dot_seen=no; \
|
|
target=`echo $@ | sed s/-recursive//`; \
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
echo "Making $$target in $$subdir"; \
|
|
if test "$$subdir" = "."; then \
|
|
dot_seen=yes; \
|
|
local_target="$$target-am"; \
|
|
else \
|
|
local_target="$$target"; \
|
|
fi; \
|
|
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
|
|| eval $$failcom; \
|
|
done; \
|
|
if test "$$dot_seen" = "no"; then \
|
|
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
|
fi; test -z "$$fail"
|
|
|
|
$(RECURSIVE_CLEAN_TARGETS):
|
|
@fail= failcom='exit 1'; \
|
|
for f in x $$MAKEFLAGS; do \
|
|
case $$f in \
|
|
*=* | --[!k]*);; \
|
|
*k*) failcom='fail=yes';; \
|
|
esac; \
|
|
done; \
|
|
dot_seen=no; \
|
|
case "$@" in \
|
|
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
|
|
*) list='$(SUBDIRS)' ;; \
|
|
esac; \
|
|
rev=''; for subdir in $$list; do \
|
|
if test "$$subdir" = "."; then :; else \
|
|
rev="$$subdir $$rev"; \
|
|
fi; \
|
|
done; \
|
|
rev="$$rev ."; \
|
|
target=`echo $@ | sed s/-recursive//`; \
|
|
for subdir in $$rev; do \
|
|
echo "Making $$target in $$subdir"; \
|
|
if test "$$subdir" = "."; then \
|
|
local_target="$$target-am"; \
|
|
else \
|
|
local_target="$$target"; \
|
|
fi; \
|
|
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
|
|| eval $$failcom; \
|
|
done && test -z "$$fail"
|
|
tags-recursive:
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
|
done
|
|
ctags-recursive:
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
|
|
done
|
|
|
|
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
|
|
END { if (nonempty) { for (i in files) print i; }; }'`; \
|
|
mkid -fID $$unique
|
|
tags: TAGS
|
|
|
|
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
|
|
$(TAGS_FILES) $(LISP)
|
|
set x; \
|
|
here=`pwd`; \
|
|
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
|
|
include_option=--etags-include; \
|
|
empty_fix=.; \
|
|
else \
|
|
include_option=--include; \
|
|
empty_fix=; \
|
|
fi; \
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
test ! -f $$subdir/TAGS || \
|
|
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
|
|
fi; \
|
|
done; \
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
|
|
END { if (nonempty) { for (i in files) print i; }; }'`; \
|
|
shift; \
|
|
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
|
|
test -n "$$unique" || unique=$$empty_fix; \
|
|
if test $$# -gt 0; then \
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
"$$@" $$unique; \
|
|
else \
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
$$unique; \
|
|
fi; \
|
|
fi
|
|
ctags: CTAGS
|
|
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
|
|
$(TAGS_FILES) $(LISP)
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
|
|
END { if (nonempty) { for (i in files) print i; }; }'`; \
|
|
test -z "$(CTAGS_ARGS)$$unique" \
|
|
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
|
|
$$unique
|
|
|
|
GTAGS:
|
|
here=`$(am__cd) $(top_builddir) && pwd` \
|
|
&& $(am__cd) $(top_srcdir) \
|
|
&& gtags -i $(GTAGS_ARGS) "$$here"
|
|
|
|
distclean-tags:
|
|
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
|
|
|
|
distdir: $(DISTFILES)
|
|
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
|
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
|
list='$(DISTFILES)'; \
|
|
dist_files=`for file in $$list; do echo $$file; done | \
|
|
sed -e "s|^$$srcdirstrip/||;t" \
|
|
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
|
|
case $$dist_files in \
|
|
*/*) $(MKDIR_P) `echo "$$dist_files" | \
|
|
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
|
|
sort -u` ;; \
|
|
esac; \
|
|
for file in $$dist_files; do \
|
|
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
|
|
if test -d $$d/$$file; then \
|
|
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
|
|
if test -d "$(distdir)/$$file"; then \
|
|
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
|
|
fi; \
|
|
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
|
|
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
|
|
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
|
|
fi; \
|
|
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
|
|
else \
|
|
test -f "$(distdir)/$$file" \
|
|
|| cp -p $$d/$$file "$(distdir)/$$file" \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
test -d "$(distdir)/$$subdir" \
|
|
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
|
|
$(am__relativize); \
|
|
new_distdir=$$reldir; \
|
|
dir1=$$subdir; dir2="$(top_distdir)"; \
|
|
$(am__relativize); \
|
|
new_top_distdir=$$reldir; \
|
|
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
|
|
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
|
|
($(am__cd) $$subdir && \
|
|
$(MAKE) $(AM_MAKEFLAGS) \
|
|
top_distdir="$$new_top_distdir" \
|
|
distdir="$$new_distdir" \
|
|
am__remove_distdir=: \
|
|
am__skip_length_check=: \
|
|
am__skip_mode_fix=: \
|
|
distdir) \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
check-am: all-am
|
|
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
|
|
check: check-recursive
|
|
all-am: Makefile all-local
|
|
installdirs: installdirs-recursive
|
|
installdirs-am:
|
|
install: install-recursive
|
|
install-exec: install-exec-recursive
|
|
install-data: install-data-recursive
|
|
uninstall: uninstall-recursive
|
|
|
|
install-am: all-am
|
|
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
|
|
|
installcheck: installcheck-recursive
|
|
install-strip:
|
|
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
|
|
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
|
|
`test -z '$(STRIP)' || \
|
|
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
|
|
mostlyclean-generic:
|
|
|
|
clean-generic:
|
|
|
|
distclean-generic:
|
|
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
|
|
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
|
|
|
|
maintainer-clean-generic:
|
|
@echo "This command is intended for maintainers to use"
|
|
@echo "it deletes files that may require special tools to rebuild."
|
|
clean: clean-recursive
|
|
|
|
clean-am: clean-generic clean-libtool mostlyclean-am
|
|
|
|
distclean: distclean-recursive
|
|
-rm -f Makefile
|
|
distclean-am: clean-am distclean-generic distclean-tags
|
|
|
|
dvi: dvi-recursive
|
|
|
|
dvi-am:
|
|
|
|
html: html-recursive
|
|
|
|
html-am:
|
|
|
|
info: info-recursive
|
|
|
|
info-am:
|
|
|
|
install-data-am:
|
|
|
|
install-dvi: install-dvi-recursive
|
|
|
|
install-dvi-am:
|
|
|
|
install-exec-am:
|
|
|
|
install-html: install-html-recursive
|
|
|
|
install-html-am:
|
|
|
|
install-info: install-info-recursive
|
|
|
|
install-info-am:
|
|
|
|
install-man:
|
|
|
|
install-pdf: install-pdf-recursive
|
|
|
|
install-pdf-am:
|
|
|
|
install-ps: install-ps-recursive
|
|
|
|
install-ps-am:
|
|
|
|
installcheck-am: installcheck-local
|
|
|
|
maintainer-clean: maintainer-clean-recursive
|
|
-rm -f Makefile
|
|
maintainer-clean-am: distclean-am maintainer-clean-generic
|
|
|
|
mostlyclean: mostlyclean-recursive
|
|
|
|
mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
|
|
mostlyclean-local
|
|
|
|
pdf: pdf-recursive
|
|
|
|
pdf-am:
|
|
|
|
ps: ps-recursive
|
|
|
|
ps-am:
|
|
|
|
uninstall-am:
|
|
|
|
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
|
|
ctags-recursive install-am install-strip tags-recursive
|
|
|
|
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
|
|
all all-am all-local check check-TESTS check-am clean \
|
|
clean-generic clean-libtool ctags ctags-recursive distclean \
|
|
distclean-generic distclean-libtool distclean-tags distdir dvi \
|
|
dvi-am html html-am info info-am install install-am \
|
|
install-data install-data-am install-dvi install-dvi-am \
|
|
install-exec install-exec-am install-html install-html-am \
|
|
install-info install-info-am install-man install-pdf \
|
|
install-pdf-am install-ps install-ps-am install-strip \
|
|
installcheck installcheck-am installcheck-local installdirs \
|
|
installdirs-am maintainer-clean maintainer-clean-generic \
|
|
mostlyclean mostlyclean-generic mostlyclean-libtool \
|
|
mostlyclean-local pdf pdf-am ps ps-am tags tags-recursive \
|
|
uninstall uninstall-am
|
|
|
|
|
|
# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
|
|
# This tells the Makefiles that these targets are not files to be built but
|
|
# commands that should be executed even if a file with the same name already
|
|
# exists.
|
|
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
|
|
build-tests check-clean check-install check-p check-s check-vfd \
|
|
install-doc lib progs tests uninstall-doc _exec_check-s _test help
|
|
|
|
help:
|
|
@$(top_srcdir)/bin/makehelp
|
|
|
|
# Install examples
|
|
install-examples uninstall-examples:
|
|
@@SETX@; for d in examples $(HDF5_INTERFACES); do \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
done
|
|
|
|
installcheck-local:
|
|
@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
|
|
|
|
# Clean examples when check-clean is invoked
|
|
check-clean ::
|
|
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
|
|
@for d in X $(SUBDIRS) examples; do \
|
|
if test $$d != X && test $$d != .; then \
|
|
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
build-check-clean:
|
|
|
|
# lib/progs/tests targets recurse into subdirectories. build-* targets
|
|
# build files in this directory.
|
|
build-lib: $(LIB)
|
|
build-progs: $(LIB) $(PROGS)
|
|
build-tests: $(LIB) $(PROGS) $(TESTS)
|
|
|
|
# General rule for recursive building targets.
|
|
# BUILT_SOURCES contain targets that need to be built before anything else
|
|
# in the directory (e.g., for Fortran type detection)
|
|
lib progs tests check-s check-p :: $(BUILT_SOURCES)
|
|
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
|
|
@for d in X $(SUBDIRS); do \
|
|
if test $$d != X && test $$d != .; then \
|
|
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# General rule for recursive cleaning targets. Like the rule above,
|
|
# but doesn't require building BUILT_SOURCES.
|
|
check-clean ::
|
|
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
|
|
@for d in X $(SUBDIRS); do \
|
|
if test $$d != X && test $$d != .; then \
|
|
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Tell Automake to build tests when the user types `make all' (this is
|
|
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
|
|
# Automake won't build them automatically, either.
|
|
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
|
|
|
|
# make install-doc doesn't do anything outside of doc directory, but
|
|
# Makefiles should recognize it.
|
|
# UPDATE: docs no longer reside in this build tree, so this target
|
|
# is depreciated.
|
|
install-doc uninstall-doc:
|
|
@echo "Nothing to be done."
|
|
|
|
# clean up files generated by tests so they can be re-run.
|
|
build-check-clean:
|
|
$(RM) -rf $(CHECK_CLEANFILES)
|
|
|
|
# run check-clean whenever mostlyclean is run
|
|
mostlyclean-local: build-check-clean
|
|
|
|
# check-install is just a synonym for installcheck
|
|
check-install: installcheck
|
|
|
|
# Run each test in order, passing $(TEST_FLAGS) to the program.
|
|
# Since tests are done in a shell loop, "make -i" does apply inside it.
|
|
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
|
|
# The timestamps give a rough idea how much time the tests use.
|
|
#
|
|
# Note that targets in TESTS (defined above) will be built when the user
|
|
# types 'make tests' or 'make check', but only programs in TEST_PROG,
|
|
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
|
|
check-TESTS: test
|
|
|
|
test _test:
|
|
@$(MAKE) build-check-s
|
|
@$(MAKE) build-check-p
|
|
|
|
# Actual execution of check-s.
|
|
build-check-s: $(LIB) $(PROGS) $(TESTS)
|
|
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
|
|
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
|
|
fi
|
|
@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
|
|
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
|
|
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
|
|
fi
|
|
|
|
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
|
|
|
|
# The dummy.chkexe here prevents the target from being
|
|
# empty if there are no tests in the current directory.
|
|
# $${log} is the log file.
|
|
# $${tname} is the name of test.
|
|
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
|
|
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
|
|
tname=$(@:.chkexe_=)$(EXEEXT);\
|
|
log=$(@:.chkexe_=.chklog); \
|
|
echo "============================"; \
|
|
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
|
|
echo "No need to test $${tname} again."; \
|
|
else \
|
|
echo "============================" > $${log}; \
|
|
if test "X$(FORTRAN_API)" = "Xyes"; then \
|
|
echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
|
|
echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
|
|
elif test "X$(CXX_API)" = "Xyes"; then \
|
|
echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
|
|
echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
|
|
else \
|
|
echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
|
|
echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
|
|
fi; \
|
|
echo "============================" >> $${log}; \
|
|
srcdir="$(srcdir)" \
|
|
$(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
|
|
&& touch $(@:.chkexe_=.chkexe) || \
|
|
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
|
|
(cat $${log} && false) || exit 1; \
|
|
echo "" >> $${log}; \
|
|
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
|
|
echo "============================" >> $${log}; \
|
|
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
|
|
cat $${log}; \
|
|
fi; \
|
|
fi
|
|
|
|
# The dummysh.chkexe here prevents the target from being
|
|
# empty if there are no tests in the current directory.
|
|
# $${log} is the log file.
|
|
# $${tname} is the name of test.
|
|
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
|
|
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
|
|
cmd=$(@:.chkexe_=);\
|
|
tname=`basename $$cmd`;\
|
|
chkname=`basename $(@:.chkexe_=.chkexe)`;\
|
|
log=`basename $(@:.chkexe_=.chklog)`; \
|
|
echo "============================"; \
|
|
if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
|
|
echo "No need to test $${tname} again."; \
|
|
else \
|
|
echo "============================" > $${log}; \
|
|
if test "X$(FORTRAN_API)" = "Xyes"; then \
|
|
echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
|
|
echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
|
|
elif test "X$(CXX_API)" = "Xyes"; then \
|
|
echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
|
|
echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
|
|
else \
|
|
echo "Testing $${tname} $(TEST_FLAGS)"; \
|
|
echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
|
|
fi; \
|
|
echo "============================" >> $${log}; \
|
|
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
|
|
srcdir="$(srcdir)" \
|
|
$(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
|
|
&& touch $${chkname} || \
|
|
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
|
|
(cat $${log} && false) || exit 1; \
|
|
echo "" >> $${log}; \
|
|
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
|
|
echo "============================" >> $${log}; \
|
|
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
|
|
cat $${log}; \
|
|
fi; \
|
|
echo "============================"; \
|
|
fi
|
|
|
|
# Actual execution of check-p.
|
|
build-check-p: $(LIB) $(PROGS) $(TESTS)
|
|
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
|
|
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
|
|
fi
|
|
@if test -n "$(TEST_PROG_PARA)"; then \
|
|
echo "**** Hint ****"; \
|
|
echo "Parallel test files reside in the current directory" \
|
|
"by default."; \
|
|
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
|
|
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
|
|
echo " export HDF5_PARAPREFIX"; \
|
|
echo " make check"; \
|
|
echo "**** end of Hint ****"; \
|
|
fi
|
|
@for test in $(TEST_PROG_PARA) dummy; do \
|
|
if test $$test != dummy; then \
|
|
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
|
|
RUNEXEC="$(RUNPARALLEL)" || exit 1; \
|
|
fi; \
|
|
done
|
|
@for test in $(TEST_SCRIPT_PARA) dummy; do \
|
|
if test $$test != dummy; then \
|
|
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
|
|
fi; \
|
|
done
|
|
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
|
|
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
|
|
fi
|
|
|
|
# Run test with different Virtual File Driver
|
|
check-vfd: $(LIB) $(PROGS) $(TESTS)
|
|
@for vfd in $(VFD_LIST) dummy; do \
|
|
if test $$vfd != dummy; then \
|
|
echo "============================"; \
|
|
echo "Testing Virtual File Driver $$vfd"; \
|
|
echo "============================"; \
|
|
$(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \
|
|
HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
|
# Otherwise a system limit (for SysV at least) may be exceeded.
|
|
.NOEXPORT:
|