mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-12-27 08:01:04 +08:00
Code Issues Packages Projects Releases Wiki Activity
ed8685acd2
hdf5/tools/h5repack/Makefile.in
James Laird ed8685acd2 [svn-r9915] Purpose: 
Bug fix

Description:
Configuration files' timestamps were incorrect.

Solution:
Update Makefiles.in.  Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.

Platforms tested:
sleipnir
2005-02-02 11:00:36 -05:00

710 lines
26 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
#
# HDF5 Library Makefile(.in)
#
#------------------------------------------------------------ -*- makefile -*-
# The following section of this makefile comes from the
# `./config/commence' file which was generated with config.status
# from `./config/commence.in'.
#-----------------------------------------------------------------------------
#------------------------------------------------------------ -*- makefile -*-
# The following section of this makefile comes from the
# `./config/conclude' file which was generated with config.status
# from `./config/conclude.in'.
#-----------------------------------------------------------------------------
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
# Install directories that automake doesn't know about
includedir = $(exec_prefix)/include
# Set the paths for autotools to be correct on heping.
# Ideally, these tools should never be needed during the build.
ACLOCAL = /usr/bin/aclocal
AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
AUTOMAKE = /usr/bin/automake
AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AWK = @AWK@
BUILD_PDB2HDF = @BUILD_PDB2HDF@
BYTESEX = @BYTESEX@
CC = @CC@
CC_VERSION = @CC_VERSION@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_LIBS = @DEFAULT_LIBS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO = @ECHO@
F77 = @F77@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FFLAGS = @FFLAGS@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
GASS = @GASS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HDF5_INTERFACES = @HDF5_INTERFACES@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZET = @HSIZET@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MPE = @MPE@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
PACKAGE = @PACKAGE@
PARALLEL = @PARALLEL@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SETX = @SETX@
SIZE_T = @SIZE_T@
SRB = @SRB@
SSL = @SSL@
STATIC_SHARED = @STATIC_SHARED@
STRIP = @STRIP@
TESTGASS = @TESTGASS@
TESTPARALLEL = @TESTPARALLEL@
TESTSRB = @TESTSRB@
TRACE_API = @TRACE_API@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
docdir = $(exec_prefix)/doc
# Scripts used to build examples
H5CC = $(bindir)/h5cc
H5CC_PP = $(bindir)/h5pcc
H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
# Include src, test, and tools/lib directories
AM_CFLAGS = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
# Test programs and scripts
TEST_SCRIPT = h5repack.sh
TEST_PROG = h5repacktst
noinst_PROGRAMS = testh5repack_detect_szip
check_SCRIPTS = $(TEST_SCRIPT)
check_PROGRAMS = $(TEST_PROG)
# Our main target, h5repack tool
bin_PROGRAMS = h5repack
# All programs depend on the hdf5 library and the tools library
LDADD = $(LIBH5TOOLS) $(LIBHDF5)
# Source files
COMMON_SOURCES = h5repack.c h5repack_copy.c h5repack_filters.c \
h5repack_list.c h5repack_opttable.c h5repack_parse.c h5repack_refs.c \
h5repack_verify.c
h5repack_SOURCES = $(COMMON_SOURCES) h5repack_main.c
h5repacktst_SOURCES = $(COMMON_SOURCES) testh5repack_attr.c testh5repack_dset.c \
testh5repack_main.c testh5repack_make.c testh5repack_util.c
testh5repack_detect_szip_SOURCES = testh5repack_detect_szip.c
# Temporary files. *.h5 are generated by h5repack. They should
# copied to the testfiles/ directory if update is required.
MOSTLYCLEANFILES = *.h5
DISTCLEANFILES = h5repack.sh
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
subdir = tools/h5repack
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES = h5repack.sh
bin_PROGRAMS = h5repack$(EXEEXT)
check_PROGRAMS = h5repacktst$(EXEEXT)
noinst_PROGRAMS = testh5repack_detect_szip$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
am__objects_1 = h5repack.$(OBJEXT) h5repack_copy.$(OBJEXT) \
h5repack_filters.$(OBJEXT) h5repack_list.$(OBJEXT) \
h5repack_opttable.$(OBJEXT) h5repack_parse.$(OBJEXT) \
h5repack_refs.$(OBJEXT) h5repack_verify.$(OBJEXT)
am_h5repack_OBJECTS = $(am__objects_1) h5repack_main.$(OBJEXT)
h5repack_OBJECTS = $(am_h5repack_OBJECTS)
h5repack_LDADD = $(LDADD)
h5repack_DEPENDENCIES = $(top_builddir)/tools/lib/libh5tools.la \
$(top_builddir)/src/libhdf5.la
h5repack_LDFLAGS =
am_h5repacktst_OBJECTS = $(am__objects_1) testh5repack_attr.$(OBJEXT) \
testh5repack_dset.$(OBJEXT) testh5repack_main.$(OBJEXT) \
testh5repack_make.$(OBJEXT) testh5repack_util.$(OBJEXT)
h5repacktst_OBJECTS = $(am_h5repacktst_OBJECTS)
h5repacktst_LDADD = $(LDADD)
h5repacktst_DEPENDENCIES = $(top_builddir)/tools/lib/libh5tools.la \
$(top_builddir)/src/libhdf5.la
h5repacktst_LDFLAGS =
am_testh5repack_detect_szip_OBJECTS = testh5repack_detect_szip.$(OBJEXT)
testh5repack_detect_szip_OBJECTS = \
$(am_testh5repack_detect_szip_OBJECTS)
testh5repack_detect_szip_LDADD = $(LDADD)
testh5repack_detect_szip_DEPENDENCIES = \
$(top_builddir)/tools/lib/libh5tools.la \
$(top_builddir)/src/libhdf5.la
testh5repack_detect_szip_LDFLAGS =
DEFS = @DEFS@
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
am__depfiles_maybe = depfiles
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/h5repack.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_copy.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_filters.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_list.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_main.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_opttable.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_parse.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_refs.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/h5repack_verify.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/testh5repack_attr.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/testh5repack_detect_szip.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/testh5repack_dset.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/testh5repack_main.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/testh5repack_make.Po \
@AMDEP_TRUE@ ./$(DEPDIR)/testh5repack_util.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
CFLAGS = @CFLAGS@
DIST_SOURCES = $(h5repack_SOURCES) $(h5repacktst_SOURCES) \
$(testh5repack_detect_szip_SOURCES)
DIST_COMMON = Makefile.am Makefile.in h5repack.sh.in
SOURCES = $(h5repack_SOURCES) $(h5repacktst_SOURCES) $(testh5repack_detect_szip_SOURCES)
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign tools/h5repack/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
h5repack.sh: $(top_builddir)/config.status h5repack.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
|| test -f $$p1 \
; then \
f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
rm -f $(DESTDIR)$(bindir)/$$f; \
done
clean-binPROGRAMS:
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
clean-noinstPROGRAMS:
@list='$(noinst_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
h5repack$(EXEEXT): $(h5repack_OBJECTS) $(h5repack_DEPENDENCIES)
@rm -f h5repack$(EXEEXT)
$(LINK) $(h5repack_LDFLAGS) $(h5repack_OBJECTS) $(h5repack_LDADD) $(LIBS)
h5repacktst$(EXEEXT): $(h5repacktst_OBJECTS) $(h5repacktst_DEPENDENCIES)
@rm -f h5repacktst$(EXEEXT)
$(LINK) $(h5repacktst_LDFLAGS) $(h5repacktst_OBJECTS) $(h5repacktst_LDADD) $(LIBS)
testh5repack_detect_szip$(EXEEXT): $(testh5repack_detect_szip_OBJECTS) $(testh5repack_detect_szip_DEPENDENCIES)
@rm -f testh5repack_detect_szip$(EXEEXT)
$(LINK) $(testh5repack_detect_szip_LDFLAGS) $(testh5repack_detect_szip_OBJECTS) $(testh5repack_detect_szip_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_copy.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_filters.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_list.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_main.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_opttable.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_refs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_verify.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_attr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_detect_szip.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_dset.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_main.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_make.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_util.Po@am__quote@
distclean-depend:
-rm -rf ./$(DEPDIR)
.c.o:
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
.c.obj:
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(COMPILE) -c `cygpath -w $<`
.c.lo:
@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
CCDEPMODE = @CCDEPMODE@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
ETAGS = etags
ETAGSFLAGS =
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = ../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(PROGRAMS) all-local
installdirs:
$(mkinstalldirs) $(DESTDIR)$(bindir)
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
clean-libtool clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-am
distclean-am: clean-am distclean-compile distclean-depend \
distclean-generic distclean-libtool distclean-tags
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am:
install-exec-am: install-binPROGRAMS
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
uninstall-am: uninstall-binPROGRAMS uninstall-info-am
.PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \
clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
clean-libtool clean-noinstPROGRAMS distclean distclean-compile \
distclean-depend distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am info info-am install \
install-am install-binPROGRAMS install-data install-data-am \
install-exec install-exec-am install-info install-info-am \
install-man install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool tags uninstall uninstall-am \
uninstall-binPROGRAMS uninstall-info-am
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(TESTS)
lib progs tests ::
@$(MAKE) build-$@ || exit 1; \
for d in X $(SUBDIRS); do \
if test $$d != X -a $$d != .; then \
(set -x; cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
install-doc uninstall-doc:
@echo "Nothing to be done."
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test: $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \
echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@for test in $(TEST_PROG) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNTEST) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPT) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
/bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \
echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd:
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
HDF5_DRIVER=$$vfd $(MAKE) check; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink