mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-12-09 07:32:32 +08:00
Code Issues Packages Projects Releases Wiki Activity
ed8685acd2
hdf5/examples/Makefile.in
James Laird ed8685acd2 [svn-r9915] Purpose: 
Bug fix

Description:
Configuration files' timestamps were incorrect.

Solution:
Update Makefiles.in.  Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.

Platforms tested:
sleipnir
2005-02-02 11:00:36 -05:00

556 lines
20 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
#
# HDF5 Library Examples Makefile(.in)
#
#------------------------------------------------------------ -*- makefile -*-
# The following section of this makefile comes from the
# `./config/commence' file which was generated with config.status
# from `./config/commence.in'.
#-----------------------------------------------------------------------------
#------------------------------------------------------------ -*- makefile -*-
# The following section of this makefile comes from the
# `./config/conclude' file which was generated with config.status
# from `./config/conclude.in'.
#-----------------------------------------------------------------------------
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
# Install directories that automake doesn't know about
includedir = $(exec_prefix)/include
# Set the paths for autotools to be correct on heping.
# Ideally, these tools should never be needed during the build.
ACLOCAL = /usr/bin/aclocal
AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
AUTOMAKE = /usr/bin/automake
AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AWK = @AWK@
BUILD_PDB2HDF = @BUILD_PDB2HDF@
BYTESEX = @BYTESEX@
CC = @CC@
CC_VERSION = @CC_VERSION@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_LIBS = @DEFAULT_LIBS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO = @ECHO@
F77 = @F77@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FFLAGS = @FFLAGS@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
GASS = @GASS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HDF5_INTERFACES = @HDF5_INTERFACES@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZET = @HSIZET@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MPE = @MPE@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
PACKAGE = @PACKAGE@
PARALLEL = @PARALLEL@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SETX = @SETX@
SIZE_T = @SIZE_T@
SRB = @SRB@
SSL = @SSL@
STATIC_SHARED = @STATIC_SHARED@
STRIP = @STRIP@
TESTGASS = @TESTGASS@
TESTPARALLEL = @TESTPARALLEL@
TESTSRB = @TESTSRB@
TRACE_API = @TRACE_API@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
docdir = $(exec_prefix)/doc
# Scripts used to build examples
H5CC = $(bindir)/h5cc
H5CC_PP = $(bindir)/h5pcc
H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example
@BUILD_PARALLEL_CONDITIONAL_FALSE@TEST_PROG_PARA =
# Example programs.
# Don't tell automake about them, because if it knew they were programs,
# it would try to compile them instead of using the h5cc script.
# This creates some extra work for us.
#
# It might be possible to use automake's COMPILE variable to have it
# use h5cc properly (and h5fc and h5c++).
TEST_PROG = h5_write h5_read h5_extend_write h5_chunk_read h5_compound \
h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers
# Tell conclude.in boilerplate when to build the examples
EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG)
EXTRA_PROG = $(EXAMPLE_PROG)
# Install files
# List all file that should be installed in examples directory
INSTALL_FILES = h5_write.c h5_read.c h5_extend_write.c h5_chunk_read.c \
h5_compound.c h5_group.c h5_select.c h5_attribute.c h5_mount.c \
h5_reference.c h5_drivers.c ph5example.c
# We need to tell automake what to clean
CLEANFILES = *.h5 *.raw *.meta *.clog $(TEST_PROG) ph5example *.o
# How to install examples
# There are a lot of rules because automake does not know about
# the examples programs, and does not recognize the install-examples
# target.
EXAMPLEDIR = $(docdir)/hdf5/examples/c
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
subdir = examples
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
DIST_COMMON = Makefile.am Makefile.in
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign examples/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am: install-data-local
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am: installcheck-local
maintainer-clean: maintainer-clean-am
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
uninstall-am: uninstall-info-am uninstall-local
.PHONY: all all-am all-local check check-TESTS check-am clean \
clean-generic clean-libtool distclean distclean-generic \
distclean-libtool distdir dvi dvi-am info info-am install \
install-am install-data install-data-am install-data-local \
install-exec install-exec-am install-info install-info-am \
install-man install-strip installcheck installcheck-am \
installcheck-local installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool uninstall uninstall-am uninstall-info-am \
uninstall-local
# Additional dependencies for each program are listed below.
$(EXTRA_PROG): $(LIBHDF5)
@BUILD_PARALLEL_CONDITIONAL_TRUE@ $(H5CC_PP) $(CFLAGS) -o $@ $(srcdir)/$@.c;
@BUILD_PARALLEL_CONDITIONAL_FALSE@ $(H5CC) $(CFLAGS) -o $@ $(srcdir)/$@.c;
$(EXAMPLEDIR):
-$(top_srcdir)/bin/mkdirs $@
install-data-local:
$(MAKE) install-examples
uninstall-local:
$(MAKE) uninstall-examples
# We want to install the source files, not the examples themselves. Add '.c' to
# each example to get its source. This is a bit kludgy.
install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
@for f in X $(INSTALL_FILES); do \
if test $$f != X; then \
(set -x; $(INSTALL) $(top_srcdir)/examples/$$f $(EXAMPLEDIR)/. || exit 1);\
fi; \
done
uninstall-examples:
@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \
set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES).c; \
fi
check-install:
$(MAKE) installcheck
installcheck-local:
$(MAKE) check
# List dependencies for each program. Normally, automake would take
# care of this for us, but if we tell automake about the programs it
# will try to build them with the normal C compiler, not h5cc. This is
# an inelegant way of solving the problem.
# All programs share the same build rule and a dependency on the main hdf5
# library above.
h5_chunk_read: $(srcdir)/h5_chunk_read.c
h5_compound: $(srcdir)/h5_compound.c
h5_extend_write: $(srcdir)/h5_extend_write.c
h5_group: $(srcdir)/h5_group.c
h5_write: $(srcdir)/h5_write.c
h5_read: $(srcdir)/h5_read.c
h5_select: $(srcdir)/h5_select.c
h5_attribute: $(srcdir)/h5_attribute.c
h5_mount: $(srcdir)/h5_mount.c
h5_reference: $(srcdir)/h5_reference.c
h5_drivers: $(srcdir)/h5_drivers.c
ph5example: $(srcdir)/ph5example.c
h5_dtransform: $(srcdir)/h5_dtransform.c
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(TESTS)
lib progs tests ::
@$(MAKE) build-$@ || exit 1; \
for d in X $(SUBDIRS); do \
if test $$d != X -a $$d != .; then \
(set -x; cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
install-doc uninstall-doc:
@echo "Nothing to be done."
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test: $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \
echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@for test in $(TEST_PROG) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNTEST) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPT) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
/bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \
echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd:
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
HDF5_DRIVER=$$vfd $(MAKE) check; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink