mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-11-21 01:04:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
cb7f03a26f
hdf5/testpar/t_mpi.c
Albert Cheng 1926a6538e [svn-r9130] Purpose: 
bug fix.

Description:
The test routines only print error messages but not all of them
return number of errors detected back to the main routine which
always exit with a 0 status.  Thus make or shell commands could
not detect there were errors.


Solution:
Changed the test routines to return appropriate number of
errors to main routine which in turn exit with the appropriate
exit code if errors found.

Platforms tested:
Tested in Sol and eirene (pp).

Misc. update:
2004-08-20 00:03:28 -05:00

777 lines
23 KiB
C
Raw Blame History

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
* the files COPYING and Copyright.html. COPYING can be found at the root *
* of the source code distribution tree; Copyright.html can be found at the *
* root level of an installed copy of the electronic HDF5 document set and *
* is linked from the top-level documents page. It can also be found at *
* http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have *
* access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*
* MPIO independent overlapping writes.
*
* First n-1 processes open 1 file.
* Each of the n-1 process writes chunks of data to the file in round-robin
* fashion, in a interleaved but not overlapped fashion. Using increasing
* chunk sizes for the benefits of testing different write sizes and also
* reducing the numbers of writes.
*
* Last process (n-1) just waits.
* First n-1 processes finish writing and cloose the file.
* Last process opens the same file and verifies the data.
*/
#include "testphdf5.h"
/* FILENAME and filenames must have the same number of names */
const char *FILENAME[2]={
"MPItest",
NULL};
char filenames[2][200];
int nerrors = 0;
hid_t fapl; /* file access property list */
/* protocols */
#define MPIO_TEST_WRITE_SIZE 1024*1024 /* 1 MB */
int
test_mpio_overlap_writes(char *filename)
{
int mpi_size, mpi_rank;
MPI_Comm comm;
MPI_Info info = MPI_INFO_NULL;
int color, mrc;
MPI_File fh;
int i;
int vrfyerrs, nerrs;
unsigned char buf[4093]; /* use some prime number for size */
int bufsize = sizeof(buf);
MPI_Offset stride;
MPI_Offset mpi_off;
MPI_Status mpi_stat;
if (VERBOSE_MED)
printf("MPIO independent overlapping writes test on file %s\n",
filename);
nerrs = 0;
/* set up MPI parameters */
MPI_Comm_size(MPI_COMM_WORLD,&mpi_size);
MPI_Comm_rank(MPI_COMM_WORLD,&mpi_rank);
/* Need at least 2 processes */
if (mpi_size < 2) {
if (MAINPROCESS)
printf("Need at least 2 processes to run MPIO test.\n");
printf(" -SKIP- \n");
return 0;
}
/* splits processes 0 to n-2 into one comm. and the last one into another */
color = ((mpi_rank < (mpi_size - 1)) ? 0 : 1);
mrc = MPI_Comm_split (MPI_COMM_WORLD, color, mpi_rank, &comm);
VRFY((mrc==MPI_SUCCESS), "Comm_split succeeded");
if (color==0){
/* First n-1 processes (color==0) open a file and write it */
mrc = MPI_File_open(comm, filename, MPI_MODE_CREATE|MPI_MODE_RDWR,
info, &fh);
VRFY((mrc==MPI_SUCCESS), "");
stride = 1;
mpi_off = mpi_rank*stride;
while (mpi_off < MPIO_TEST_WRITE_SIZE){
/* make sure the write does not exceed the TEST_WRITE_SIZE */
if (mpi_off+stride > MPIO_TEST_WRITE_SIZE)
stride = MPIO_TEST_WRITE_SIZE - mpi_off;
/* set data to some trivial pattern for easy verification */
for (i=0; i<stride; i++)
buf[i] = (unsigned char)(mpi_off+i);
mrc = MPI_File_write_at(fh, mpi_off, buf, (int)stride, MPI_BYTE,
&mpi_stat);
VRFY((mrc==MPI_SUCCESS), "");
/* move the offset pointer to last byte written by all processes */
mpi_off += (mpi_size - 1 - mpi_rank) * stride;
/* Increase chunk size without exceeding buffer size. */
/* Then move the starting offset for next write. */
stride *= 2;
if (stride > bufsize)
stride = bufsize;
mpi_off += mpi_rank*stride;
}
/* close file and free the communicator */
mrc = MPI_File_close(&fh);
VRFY((mrc==MPI_SUCCESS), "MPI_FILE_CLOSE");
mrc = MPI_Comm_free(&comm);
VRFY((mrc==MPI_SUCCESS), "MPI_Comm_free");
/* sync with the other waiting processes */
mrc = MPI_Barrier(MPI_COMM_WORLD);
VRFY((mrc==MPI_SUCCESS), "Sync after writes");
}else{
/* last process waits till writes are done,
* then opens file to verify data.
*/
mrc = MPI_Barrier(MPI_COMM_WORLD);
VRFY((mrc==MPI_SUCCESS), "Sync after writes");
mrc = MPI_File_open(comm, filename, MPI_MODE_RDONLY,
info, &fh);
VRFY((mrc==MPI_SUCCESS), "");
stride = bufsize;
for (mpi_off=0; mpi_off < MPIO_TEST_WRITE_SIZE; mpi_off += bufsize){
/* make sure it does not read beyond end of data */
if (mpi_off+stride > MPIO_TEST_WRITE_SIZE)
stride = MPIO_TEST_WRITE_SIZE - mpi_off;
mrc = MPI_File_read_at(fh, mpi_off, buf, (int)stride, MPI_BYTE,
&mpi_stat);
VRFY((mrc==MPI_SUCCESS), "");
vrfyerrs=0;
for (i=0; i<stride; i++){
unsigned char expected;
expected = (unsigned char)(mpi_off+i);
if ((expected != buf[i]) &&
(vrfyerrs++ < MAX_ERR_REPORT || VERBOSE_MED)) {
printf("proc %d: found data error at [%ld], expect %u, got %u\n",
mpi_rank, (long)(mpi_off+i), expected, buf[i]);
}
}
if (vrfyerrs > MAX_ERR_REPORT && !VERBOSE_MED)
printf("proc %d: [more errors ...]\n", mpi_rank);
nerrs += vrfyerrs;
}
/* close file and free the communicator */
mrc = MPI_File_close(&fh);
VRFY((mrc==MPI_SUCCESS), "MPI_FILE_CLOSE");
mrc = MPI_Comm_free(&comm);
VRFY((mrc==MPI_SUCCESS), "MPI_Comm_free");
}
/*
* one more sync to ensure all processes have done reading
* before ending this test.
*/
mrc = MPI_Barrier(MPI_COMM_WORLD);
VRFY((mrc==MPI_SUCCESS), "Sync before leaving test");
return (nerrs);
}
#define MB 1048576 /* 1024*1024 == 2**20 */
#define GB 1073741824 /* 1024**3 == 2**30 */
#define TWO_GB_LESS1 2147483647 /* 2**31 - 1 */
#define FOUR_GB_LESS1 4294967295L /* 2**32 - 1 */
/*
* Verify that MPI_Offset exceeding 2**31 can be computed correctly.
* Print any failure as information only, not as an error so that this
* won't abort the remaining test or other separated tests.
*
* Test if MPIO can write file from under 2GB to over 2GB and then
* from under 4GB to over 4GB.
* Each process writes 1MB in round robin fashion.
* Then reads the file back in by reverse order, that is process 0
* reads the data of process n-1 and vice versa.
*/
int
test_mpio_gb_file(char *filename)
{
int mpi_size, mpi_rank;
MPI_Info info = MPI_INFO_NULL;
int mrc;
MPI_File fh;
int i, j, n;
int vrfyerrs;
int writerrs; /* write errors */
int nerrs;
int ntimes; /* how many times */
char *buf = NULL;
char expected;
MPI_Offset mpi_off;
MPI_Offset mpi_off_old;
MPI_Status mpi_stat;
int is_signed, sizeof_mpi_offset;
nerrs = 0;
/* set up MPI parameters */
MPI_Comm_size(MPI_COMM_WORLD,&mpi_size);
MPI_Comm_rank(MPI_COMM_WORLD,&mpi_rank);
if (VERBOSE_MED)
printf("MPI_Offset range test\n");
/* figure out the signness and sizeof MPI_Offset */
mpi_off = 0;
is_signed = ((MPI_Offset)(mpi_off - 1)) < 0;
sizeof_mpi_offset = (int)(sizeof(MPI_Offset));
/*
* Verify the sizeof MPI_Offset and correctness of handling multiple GB
* sizes.
*/
if (MAINPROCESS){ /* only process 0 needs to check it*/
printf("MPI_Offset is %s %d bytes integeral type\n",
is_signed ? "signed" : "unsigned", (int)sizeof(MPI_Offset));
if (sizeof_mpi_offset <= 4 && is_signed){
printf("Skipped 2GB range test "
"because MPI_Offset cannot support it\n");
}else {
/* verify correctness of assigning 2GB sizes */
mpi_off = 2 * 1024 * (MPI_Offset)MB;
INFO((mpi_off>0), "2GB OFFSET assignment no overflow");
INFO((mpi_off-1)==TWO_GB_LESS1, "2GB OFFSET assignment succeed");
/* verify correctness of increasing from below 2 GB to above 2GB */
mpi_off = TWO_GB_LESS1;
for (i=0; i < 3; i++){
mpi_off_old = mpi_off;
mpi_off = mpi_off + 1;
/* no overflow */
INFO((mpi_off>0), "2GB OFFSET increment no overflow");
/* correct inc. */
INFO((mpi_off-1)==mpi_off_old, "2GB OFFSET increment succeed");
}
}
if (sizeof_mpi_offset <= 4){
printf("Skipped 4GB range test "
"because MPI_Offset cannot support it\n");
}else {
/* verify correctness of assigning 4GB sizes */
mpi_off = 4 * 1024 * (MPI_Offset)MB;
INFO((mpi_off>0), "4GB OFFSET assignment no overflow");
INFO((mpi_off-1)==FOUR_GB_LESS1, "4GB OFFSET assignment succeed");
/* verify correctness of increasing from below 4 GB to above 4 GB */
mpi_off = FOUR_GB_LESS1;
for (i=0; i < 3; i++){
mpi_off_old = mpi_off;
mpi_off = mpi_off + 1;
/* no overflow */
INFO((mpi_off>0), "4GB OFFSET increment no overflow");
/* correct inc. */
INFO((mpi_off-1)==mpi_off_old, "4GB OFFSET increment succeed");
}
}
}
/*
* Verify if we can write to a file of multiple GB sizes.
*/
if (VERBOSE_MED)
printf("MPIO GB file test %s\n", filename);
if (sizeof_mpi_offset <= 4){
printf("Skipped GB file range test "
"because MPI_Offset cannot support it\n");
}else{
buf = malloc(MB);
VRFY((buf!=NULL), "malloc succeed");
/* open a new file. Remove it first in case it exists. */
if (MAINPROCESS)
remove(filename);
MPI_Barrier(MPI_COMM_WORLD); /* prevent racing condition */
mrc = MPI_File_open(MPI_COMM_WORLD, filename, MPI_MODE_CREATE|MPI_MODE_RDWR,
info, &fh);
VRFY((mrc==MPI_SUCCESS), "MPI_FILE_OPEN");
printf("MPIO GB file write test %s\n", filename);
/* instead of writing every bytes of the file, we will just write
* some data around the 2 and 4 GB boundaries. That should cover
* potential integer overflow and filesystem size limits.
*/
writerrs = 0;
for (n=2; n <= 4; n+=2){
ntimes = GB/MB*n/mpi_size + 1;
for (i=ntimes-2; i <= ntimes; i++){
mpi_off = (i*mpi_size + mpi_rank)*(MPI_Offset)MB;
if (VERBOSE_MED)
HDfprintf(stdout,"proc %d: write to mpi_off=%016llx, %lld\n",
mpi_rank, mpi_off, mpi_off);
/* set data to some trivial pattern for easy verification */
for (j=0; j<MB; j++)
*(buf+j) = i*mpi_size + mpi_rank;
if (VERBOSE_MED)
HDfprintf(stdout,"proc %d: writing %d bytes at offset %lld\n",
mpi_rank, MB, mpi_off);
mrc = MPI_File_write_at(fh, mpi_off, buf, MB, MPI_BYTE, &mpi_stat);
INFO((mrc==MPI_SUCCESS), "GB size file write");
if (mrc!=MPI_SUCCESS)
writerrs++;
}
}
/* close file and free the communicator */
mrc = MPI_File_close(&fh);
VRFY((mrc==MPI_SUCCESS), "MPI_FILE_CLOSE");
mrc = MPI_Barrier(MPI_COMM_WORLD);
VRFY((mrc==MPI_SUCCESS), "Sync after writes");
/*
* Verify if we can read the multiple GB file just created.
*/
/* open it again to verify the data written */
/* but only if there was no write errors */
printf("MPIO GB file read test %s\n", filename);
if (errors_sum(writerrs)>0){
printf("proc %d: Skip read test due to previous write errors\n",
mpi_rank);
goto finish;
}
mrc = MPI_File_open(MPI_COMM_WORLD, filename, MPI_MODE_RDONLY, info, &fh);
VRFY((mrc==MPI_SUCCESS), "");
/* Only read back parts of the file that have been written. */
for (n=2; n <= 4; n+=2){
ntimes = GB/MB*n/mpi_size + 1;
for (i=ntimes-2; i <= ntimes; i++){
mpi_off = (i*mpi_size + (mpi_size - mpi_rank - 1))*(MPI_Offset)MB;
if (VERBOSE_MED)
HDfprintf(stdout,"proc %d: read from mpi_off=%016llx, %lld\n",
mpi_rank, mpi_off, mpi_off);
mrc = MPI_File_read_at(fh, mpi_off, buf, MB, MPI_BYTE, &mpi_stat);
INFO((mrc==MPI_SUCCESS), "GB size file read");
expected = i*mpi_size + (mpi_size - mpi_rank - 1);
vrfyerrs=0;
for (j=0; j<MB; j++){
if ((*(buf+j) != expected) &&
(vrfyerrs++ < MAX_ERR_REPORT || VERBOSE_MED)){
printf("proc %d: found data error at [%ld+%d], expect %d, got %d\n",
mpi_rank, (long)mpi_off, j, expected, *(buf+j));
}
}
if (vrfyerrs > MAX_ERR_REPORT && !VERBOSE_MED)
printf("proc %d: [more errors ...]\n", mpi_rank);
nerrs += vrfyerrs;
}
}
/* close file and free the communicator */
mrc = MPI_File_close(&fh);
VRFY((mrc==MPI_SUCCESS), "MPI_FILE_CLOSE");
/*
* one more sync to ensure all processes have done reading
* before ending this test.
*/
mrc = MPI_Barrier(MPI_COMM_WORLD);
VRFY((mrc==MPI_SUCCESS), "Sync before leaving test");
}
finish:
if (buf)
HDfree(buf);
return (nerrs);
}
/*
* MPI-IO Test: One writes, Many reads.
* Verify if only one process writes some data and then all other
* processes can read them back correctly. This tests if the
* underlaying parallel I/O and file system supports parallel I/O
* correctly.
*
* Algorithm: Only one process (e.g., process 0) writes some data.
* Then all processes, including the writing process, read the data
* back and verify them against the original values.
*/
/*
* Default filename can be specified via first program argument.
* Each process writes something, then reads all data back.
*/
#define DIMSIZE 32 /* Dimension size. */
#define PRINTID printf("Proc %d: ", mpi_rank)
#define USENONE 0
#define USEATOM 1 /* request atomic I/O */
#define USEFSYNC 2 /* request file_sync */
int test_mpio_1wMr(char *filename, int special_request)
{
char hostname[128];
int mpi_size, mpi_rank;
MPI_File fh;
char mpi_err_str[MPI_MAX_ERROR_STRING];
int mpi_err_strlen;
int mpi_err;
unsigned char writedata[DIMSIZE], readdata[DIMSIZE];
unsigned char expect_val;
int i, irank;
int nerrs = 0; /* number of errors */
int atomicity;
MPI_Offset mpi_off;
MPI_Status mpi_stat;
MPI_Comm_size(MPI_COMM_WORLD, &mpi_size);
MPI_Comm_rank(MPI_COMM_WORLD, &mpi_rank);
if (MAINPROCESS && VERBOSE_MED){
printf("Testing one process writes, all processes read.\n");
printf("Using %d processes accessing file %s\n", mpi_size, filename);
printf(" (Filename can be specified via program argument)\n");
}
/* show the hostname so that we can tell where the processes are running */
if (VERBOSE_MED){
if (gethostname(hostname, 128) < 0){
PRINTID;
printf("gethostname failed\n");
return 1;
}
PRINTID;
printf("hostname=%s\n", hostname);
}
/* Delete any old file in order to start anew. */
/* Must delete because MPI_File_open does not have a Truncate mode. */
/* Don't care if it has error. */
MPI_File_delete(filename, MPI_INFO_NULL);
if ((mpi_err = MPI_File_open(MPI_COMM_WORLD, filename,
MPI_MODE_RDWR | MPI_MODE_CREATE ,
MPI_INFO_NULL, &fh))
!= MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_open failed (%s)\n", mpi_err_str);
return 1;
}
if (special_request & USEATOM){
/* ==================================================
* Set atomcity to true (1). A POSIX compliant filesystem
* should not need this.
* ==================================================*/
if ((mpi_err = MPI_File_get_atomicity(fh, &atomicity)) != MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_get_atomicity failed (%s)\n", mpi_err_str);
}
if (VERBOSE_HI)
printf("Initial atomicity = %d\n", atomicity);
if ((mpi_err = MPI_File_set_atomicity(fh, 1)) != MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_set_atomicity failed (%s)\n", mpi_err_str);
}
if ((mpi_err = MPI_File_get_atomicity(fh, &atomicity)) != MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_get_atomicity failed (%s)\n", mpi_err_str);
}
if (VERBOSE_HI)
printf("After set_atomicity atomicity = %d\n", atomicity);
}
/* This barrier is not necessary but do it anyway. */
MPI_Barrier(MPI_COMM_WORLD);
if (VERBOSE_HI){
PRINTID;
printf("between MPI_Barrier and MPI_File_write_at\n");
}
/* ==================================================
* Each process calculates what to write but
* only process irank(0) writes.
* ==================================================*/
irank=0;
for (i=0; i < DIMSIZE; i++)
writedata[i] = irank*DIMSIZE + i;
mpi_off = irank*DIMSIZE;
/* Only one process writes */
if (mpi_rank==irank){
if (VERBOSE_HI){
PRINTID; printf("wrote %d bytes at %ld\n", DIMSIZE, (long)mpi_off);
}
if ((mpi_err = MPI_File_write_at(fh, mpi_off, writedata, DIMSIZE,
MPI_BYTE, &mpi_stat))
!= MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_write_at offset(%ld), bytes (%d), failed (%s)\n",
(long) mpi_off, DIMSIZE, mpi_err_str);
return 1;
};
};
/* Bcast the return code and */
/* make sure all writing are done before reading. */
MPI_Bcast(&mpi_err, 1, MPI_INT, irank, MPI_COMM_WORLD);
if (VERBOSE_HI){
PRINTID;
printf("MPI_Bcast: mpi_err = %d\n", mpi_err);
}
if (special_request & USEFSYNC){
/* ==================================================
* Do a file sync. A POSIX compliant filesystem
* should not need this.
* ==================================================*/
if (VERBOSE_HI)
printf("Apply MPI_File_sync\n");
/* call file_sync to force the write out */
if ((mpi_err = MPI_File_sync(fh)) != MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_sync failed (%s)\n", mpi_err_str);
}
MPI_Barrier(MPI_COMM_WORLD);
/* call file_sync to force the write out */
if ((mpi_err = MPI_File_sync(fh)) != MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_sync failed (%s)\n", mpi_err_str);
}
}
/* This barrier is not necessary because the Bcase or File_sync above */
/* should take care of it. Do it anyway. */
MPI_Barrier(MPI_COMM_WORLD);
if (VERBOSE_HI){
PRINTID;
printf("after MPI_Barrier\n");
}
/* ==================================================
* Each process reads what process 0 wrote and verify.
* ==================================================*/
irank=0;
mpi_off = irank*DIMSIZE;
if ((mpi_err = MPI_File_read_at(fh, mpi_off, readdata, DIMSIZE, MPI_BYTE,
&mpi_stat))
!= MPI_SUCCESS){
MPI_Error_string(mpi_err, mpi_err_str, &mpi_err_strlen);
PRINTID;
printf("MPI_File_read_at offset(%ld), bytes (%d), failed (%s)\n",
(long) mpi_off, DIMSIZE, mpi_err_str);
return 1;
};
for (i=0; i < DIMSIZE; i++){
expect_val = irank*DIMSIZE + i;
if (readdata[i] != expect_val){
PRINTID;
printf("read data[%d:%d] got %02x, expect %02x\n", irank, i,
readdata[i], expect_val);
nerrs++;
}
}
MPI_File_close(&fh);
if (VERBOSE_HI){
PRINTID;
printf("%d data errors detected\n", nerrs);
}
mpi_err = MPI_Barrier(MPI_COMM_WORLD);
return nerrs;
}
/*
* parse the command line options
*/
int
parse_options(int argc, char **argv)
{
while (--argc){
if (**(++argv) != '-'){
break;
}else{
switch(*(*argv+1)){
case 'v': if (*((*argv+1)+1))
ParseTestVerbosity((*argv+1)+1);
else
SetTestVerbosity(VERBO_MED);
break;
case 'f': if (--argc < 1) {
nerrors++;
return(1);
}
if (**(++argv) == '-') {
nerrors++;
return(1);
}
paraprefix = *argv;
break;
case 'h': /* print help message--return with nerrors set */
return(1);
default: nerrors++;
return(1);
}
}
} /*while*/
/* compose the test filenames */
{
int i, n;
hid_t plist;
plist = H5Pcreate (H5P_FILE_ACCESS);
H5Pset_fapl_mpio(plist, MPI_COMM_WORLD, MPI_INFO_NULL);
n = sizeof(FILENAME)/sizeof(FILENAME[0]) - 1; /* exclude the NULL */
for (i=0; i < n; i++)
if (h5_fixname(FILENAME[i],plist,filenames[i],sizeof(filenames[i]))
== NULL){
printf("h5_fixname failed\n");
nerrors++;
return(1);
}
H5Pclose(plist);
if (VERBOSE_MED){
printf("Test filenames are:\n");
for (i=0; i < n; i++)
printf(" %s\n", filenames[i]);
}
}
return(0);
}
/*
* Show command usage
*/
void
usage(void)
{
printf("Usage: t_mpi [-v<verbosity>] [-f <prefix>]\n");
printf("\t-v<verbosity>\tset verbose level (0-9,l,m,h)\n");
printf("\t-f <prefix>\tfilename prefix\n");
printf("\n");
}
/*
* return the sum of all errors.
*/
int errors_sum(nerrs)
{
int temp;
MPI_Allreduce(&nerrs, &temp, 1, MPI_INT, MPI_SUM, MPI_COMM_WORLD);
return(temp);
}
int
main(int argc, char **argv)
{
int mpi_size, mpi_rank; /* mpi variables */
int ret_code;
MPI_Init(&argc, &argv);
MPI_Comm_size(MPI_COMM_WORLD, &mpi_size);
MPI_Comm_rank(MPI_COMM_WORLD, &mpi_rank);
H5open();
if (parse_options(argc, argv) != 0){
if (MAINPROCESS)
usage();
goto finish;
}
if (MAINPROCESS){
printf("===================================\n");
printf("MPI functionality tests\n");
printf("===================================\n");
}
if (VERBOSE_MED)
h5_show_hostname();
fapl = H5Pcreate (H5P_FILE_ACCESS);
H5Pset_fapl_mpio(fapl, MPI_COMM_WORLD, MPI_INFO_NULL);
MPI_BANNER("MPIO 1 write Many read test...");
ret_code = test_mpio_1wMr(filenames[0], USENONE);
ret_code = errors_sum(ret_code);
if (mpi_rank==0 && ret_code > 0){
printf("***FAILED with %d total errors\n", ret_code);
nerrors += ret_code;
}
/* test atomicity and file sync in high verbose mode only */
/* since they often hang when broken and PHDF5 does not use them. */
if (VERBOSE_HI){
MPI_BANNER("MPIO 1 write Many read test with atomicity...");
ret_code = test_mpio_1wMr(filenames[0], USEATOM);
ret_code = errors_sum(ret_code);
if (mpi_rank==0 && ret_code > 0){
printf("***FAILED with %d total errors\n", ret_code);
nerrors += ret_code;
}
MPI_BANNER("MPIO 1 write Many read test with file sync...");
ret_code = test_mpio_1wMr(filenames[0], USEFSYNC);
ret_code = errors_sum(ret_code);
if (mpi_rank==0 && ret_code > 0){
printf("***FAILED with %d total errors\n", ret_code);
nerrors += ret_code;
}
}
MPI_BANNER("MPIO File size range test...");
ret_code = test_mpio_gb_file(filenames[0]);
ret_code = errors_sum(ret_code);
if (mpi_rank==0 && ret_code > 0){
printf("***FAILED with %d total errors\n", ret_code);
nerrors += ret_code;
}
MPI_BANNER("MPIO independent overlapping writes...");
ret_code = test_mpio_overlap_writes(filenames[0]);
ret_code = errors_sum(ret_code);
if (mpi_rank==0 && ret_code > 0){
printf("***FAILED with %d total errors\n", ret_code);
nerrors += ret_code;
}
finish:
/* make sure all processes are finished before final report, cleanup
* and exit.
*/
MPI_Barrier(MPI_COMM_WORLD);
if (MAINPROCESS){ /* only process 0 reports */
printf("===================================\n");
if (nerrors){
printf("***MPI tests detected %d errors***\n", nerrors);
}
else{
printf("MPI tests finished with no errors\n");
}
printf("===================================\n");
}
h5_cleanup(FILENAME, fapl);
H5close();
/* MPI_Finalize must be called AFTER H5close which may use MPI calls */
MPI_Finalize();
/* cannot just return (nerrors) because exit code is limited to 1byte */
return(nerrors!=0);
}
Reference in New Issue View Git Blame Copy Permalink