mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-11-27 02:10:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
c19e495c00
hdf5/release_docs/INSTALL_Windows.txt
MuQun Yang 52846d6aac [svn-r7888] Purpose: 
Fix some typos and clean up the doc.

Description:

Solution:

Platforms tested:

Misc. update:
2003-11-26 11:34:15 -05:00

650 lines
20 KiB
Plaintext
Raw Blame History

HDF5 Build and Install Instructions for Windows 2000/XP.
----------------------------------------------------------
The instructions which follow assume that you will be using the
source code release 'zip' file (hdf5-160.zip).
***************************WARNINGS****************************
Please read CAREFULLY about Preconditions before you go to the
following sections
Preconditions
1. Installed MicroSoft Developer Studio,Visual C++ 6.0 and
WinZip.
2. Set up a directory structure to unpack the library.
For example:
c:\ (any drive)
MyHDFstuff\ (any folder name)
3. Download the hdf5-1.* distribution archive and use WinZip to
extract the hdf5 package into c:\MyHDFstuff. This creates a
directory called 'hdf5-1.*' under MyHDFstuff which contains
several files and directories. Rename "hdf5-1.*" to "hdf5".
4. HDF5 uses zlib for compression and zlib is NOT distributed
with hdf5 lib in 1.6.0 release. You have to install your own
zlib library or you may go to HDF web site
(ftp://ftp.ncsa.uiuc.edu/HDF/gzip/)
to download the correponding zlib library by yourself. If you
want to build HDF5 library without using zlib, please read section V.
5. HDF5 uses szlib(szip) for compression and szlib is distributed with hdf5 lib
in 1.6.0 release. You can also download szlib source codes and binaries from
ftp://ftp.ncsa.uiuc.edu/HDF/szip/windows/
If you want to build HDF5 library without using szlib, please read
section V.
6. HDF4-related tools are not built and released with HDF5 library
packages any more. To obtain HDF4-related tools, please check
http://hdf.ncsa.uiuc.edu/h4toh5/ and ftp://hdf.ncsa.uiuc.edu/HDF5/h4toh5/
7. For .NET users, please go to section VI.
8. For DLL users, please do read and follow "DLL hints" at Section IV.
9. For users who would like to build, test and use HDF5 snapshot release, please
read Section VII.
---------------------------------------------------------------
The following sections discuss installation procedures in detail:
Section I: What do we build and install
Section II: Building and testing hdf5 libraries and non-hdf4
related hdf5 tools
tools
Section III: Building an application using the HDF5 library or
DLL
Section IV: Some more helpful pointers
Section V: Disable gzip compression
Section VI: How to build in HDF5 in VS 7.0(.NET)
Section VII: Build and test HDF5 snapshot release
Section VIII: Misc.
***************************************************************
Section I:
What do we build and install?
HDF5 static library:
debug and release version
HDF5 Dynamic Link Library(DLL):
debug and release version as well as export libraries for
DLL
HDF5 tool library:
debug and release version
HDF5 tool export library for DLL:
debug and release version
HDF5 tools:
non-hdf4 related tools
HDF5 library testing programs:
hdf5 library comprehensive tests
HDF5 related tools testing programs:
hdf5 tools testing programs
NOTE: ** We use zlib 1.1.4 for both binary and source
release.
**
**************************************************************
Section II:
Building and testing hdf5 libraries and non-hdf4 related tools
==================================================
STEP 1: Building hdf5 libraries and non-hdf4 related tools
1. Extract all.zip under c:\myHDFstuff\hdf5\windows to c:\myHDFstuff'
The system directory can usually be found under the path
C:\WINNT\system or C:\WINDOWS\system
2. Invoke Microsoft Visual C++, go to "File" and select
the "Open Workspace" option.
Then open the c:\myHDFstuff\hdf5\proj\all\all.dsw
workspace.
3. Select project hdf5dll, right click mouse; choose settings,
find "Link", go to the Category box and choose "Input",
go to the box "Object/library modules" and go to the end of the line;
check whether the zlib dll library path is correct.
If not, replace the old path with the correct path.
You should do this for both Debug and release version.
4. Go to "Tools" and select "Options", find "Directories";
4.1 Find the box "Show directories for", choose "Include files",
If you cannot find your zlib and szlib header path
(for example, C:\zlib114\include,C:\szlib\include)
from the directory list,
add them(for example,C:\zlib114\include,C:\szlib\include) to
the included directories.
4.2 Find the box "Show directories for", choose "Library files",
If you cannot find your zlib and szlib library path
(for example, C:\zlib114\lib,C:szlib\lib,C:szlib\dll)
from the directory list,
add them(C:\zlib114\lib,C:\szlib\lib,C:\szlib\dll) to the included directories.
5. Select "Build", then Select "Set Active Configuration".
On Windows platform select as the active configuration
"all -- Win32 Debug" to build debug versions of
single-threaded static libraries, Debug multithreaded
DLLs and tests.
or
"all -- Win32 Release" to build release versions of
single-threaded static libraries, multithreaded DLLs
and tests.
Warning messages can be ignored.
When the debug or release build is done the directories
listed below will contain the following files:
c:\MyHDFstuff\hdf5\proj\hdf5\debug -
c:\MyHDFstuff\hdf5\proj\hdf5\release -
hdf5.lib- the hdf5 library
c:\MyHDFstuff\hdf5\proj\hdf5dll\debug -
hdf5ddll.dll- the hdf5 library
hdf5ddll.lib- the dll export library
c:\MyHDFstuff\hdf5\proj\hdf5dll\release -
hdf5dll.dll- the hdf5 library
hdf5dll.lib- the dll export library
c:\MyHDFstuff\hdf5\test\"test directory"-
c:\MyHDFstuff\hdf5\tools\toolslib\debug
c:\MyHDFstuff\hdf5\tools\toolslib\release
toolslib.lib- the tools library
c:\MyHDFstuff\hdf5\tools\toolslibD\debug
c:\MyHDFstuff\hdf5\tools\toolslibD\release
toolslibD.lib- the dll export library
c:\MyHDFstuff\hdf5\tools\"tools directory"-
where non-hdf4 related tools directory is one of the
following:
h5dump(dll)
h5ls(dll)
h5debug(dll)
h5import(dll)
h5repart(dll)
gifconv(dll)
Test and tool directory contains debug and release
subdirectories with the corresponding tests and tools.
STEP 2: testing hdf5 libraries and non-hdf4 related tools
In a command prompt window run the test batch file which resides in
the hdf5\test directory(for example: C:\MyHDFstuff\hdf5\test)to make
sure that the library was built correctly.
You can possibily test four versions of hdf5 library and tools. They are:
release version
release dll version
debug version
debug dll version
NOTE:
1) hdf5ddll.dll and hdf5dll.dll should be placed into some place that
the application can find, one suggestion is to use
the C:\WINNT\system or C:\WINDOWS\system directory before using the dlls.
2) If you want to test HDF5 DLL using HDF5 test projects inside HDF5 workspace,
libtestD.dll should also be placed into some place that the application
can find, one suggestion is to use the C:\WINNT\system or C:\WINDOWS\system
directory before testing HDF5 DLL using HDF5 test projects inside HDF5
workspace.
We strongly suggest you to redirect your testing results into
an output file and you can easily check the testing results.
You may use either NotePad or WordPad or whatever other
windows tools to check the results. For the purpose of printing,
please choose font less than 14 for better alignment of the text.
1. hdf5 library testing
cd into the hdf5\test directory.
(1) basic tests
Go to a) b) c) or d) to test your chosen version
a) release static version
type:
hdf5test release >"Your output filename"
b) release dll version
type:
hdf5test release dll > "Your output filename"
c) debug static version
type:
hdf5test debug >"Your output filename"
d) debug dll version
type:
hdf5test debug dll >"Your output filename"
(2) timing tests
Go to a) b) c) or d) to test your chosen version
a) release static version
type:
hdf5timingtest release >"Your output filename"
b) release dll version
type:
hdf5timingtest release dll >"Your output filename"
c) debug static version
type:
hdf5timingtest debug >"Your output filename"
d) debug dll version
type:
hdf5timingtest debug dll >"Your output filename"
Use notepad or wordpad to check results. You should
not find any FAILED marks in your output files.
Note: big test is currently not working for windows because it needs
to allocate more space, however, HDF5 can support more than 4GB
file if you are using NTFS. We still investigate the possibility to support
this test.
2. hdf5 tools testing
Currently we are only supporting h5dump test. We are
investigating h5ls test now.
1) h5dump test
cd back into hdf5 directory and then cd into tools
directory(...\hdf5\tools)
Go to a) b) c) or d) to test your chosen version
a) release static version
type:
dumptest release >"Your output filename"
b) release dll version
type:
dumptest release dll > "Your output filename"
c) debug static version
type:
dumptest debug >"Your output filename"
d) debug dll version
type:
dumptest debug dll >"Your output filename"
We are using "fc" command to compare whether dumper
generates correct results. Supposedly you should find
"FC: no differences encountered" in your output file.
However, since we are comparing the actual dumper output
with the expected dumper output under different directory,
you may see something like:
"
***** ..\TESTFILES\tall-1.ddl
#############################
Expected output for 'h5dump tall.h5'
#############################
HDF5 "tall.h5" {
GROUP "/" {
***** TALL-1.RESULTS
HDF5 "..\..\testfiles\tall.h5" {
GROUP "/" {
*****
"
The actual dumper output is correct. The difference showing
here is the different representations of filename of the same
file.
STEP 3: BUILDING THE EXAMPLES
1. Invoke Microsoft Visual C++, go to "File" and select
the "Open Workspace" option.
Then open the workspace
c:\myHDFstuff\hdf5\examples\allexamples\allexamples.dsw.
2. Select "Build", then Select "Set Active Configuration".
On Windows platform select as the active configuration
"allexamples -- Win32 Debug" to build debug versions
of the examples.
or
"allexamples -- Win32 Release" to build release
versions the examples.
When the debug build or release build is done
there should be the following subdirectories in
C:\myHDFstuff\hdf5\examples\
attributetest
chunkread
compoundtest
extendwritetest
grouptest
readtest
selecttest
writetest
3. Run the batch file "InstallExamples.bat" which
resides in the top level directory(C:\MyHDFSTUFF\hdf5).
This file creates 2 new directories,examplesREL and
examplesDBG,in the examples directory and places
all the executables in it. Both the release and debug
versions of the examples should be built before this
step is done. The examples should be tested in these 2
new directories due to some dependencies between the
examples. Especially writetest.exe and extendwritetest.exe
should be executed before chunkread.exe and readtest.exe
due to dependencies among these files.
Section III:
BUILDING AN APPLICATION USING THE HDF5 LIBRARY OR DLL- SOME HELPFUL
POINTERS
====================================================================
If you are building an application that uses the HDF5 library the
following locations will need to be specified for locating header files
and linking in the HDF libraries:
<top-level HDF5 directory>\src
where <top-level HDF5 directory> may be
C:\MyHDFstuff\hdf5\
To specify this location in the settings for your VC++ project, you may choose
one of the following two methods.
1)
To insert the path that specifics HDF5 and zlib,szlib header files:
1. Open your VC project in Microsoft Visual C++ and make sure it is
the active project.
2. Go to the Project menu and chose the 'Settings' option.
3. Chose the build configuration you would like to modify in the
drop down menu labeled with 'Settings For:'
4. Chose the C/C++ tab
5. At the bottom of the window, there should be a text-area labeled
with 'Project Options:'. In this text-area, scroll until you
reach the end and type /I "<top-level HDF5 directory>\src" and
then click OK.
To link the HDF5 library with your application:
1. Open your VC project in Microsoft Visual C++ and make sure it is
the active project.
2. Go to the Project menu and chose the 'Add to Project' option and
then 'Files' option.
3. Change the 'Files of type:' to 'Library Files (.lib)'
4. Navigate through the directories until you find the location of
the hdf5.lib.
5. Select hdf5.lib and click OK.
6. repeat 1-5, to select zlib.lib and szlib.lib.
2)
Go to tools/options/directories,
1. Insert the correct HDF5,zlib,szlib paths for both headers(include) and libraries.
2. Go to the Project menu and choose the 'Settings' option.
3. Find the "link" option and "Input" category, insert "zlib.lib, szlib.lib, hdf5.lib".
To use the DLL:
1. Follow the steps for specifing the location of the header files
as shown above.
2. Follow the steps for linking the HDF5 library as shown above
except now link the export library that is created with the DLL.
The export library is called hdf5dll.lib or hdf5ddll.lib for
debug version.
3. Place the DLL in a location that Windows will be able to locate
it. The searched path and order for DLL's is
a) The directory where the executable module for the current
process is located.
b) The current directory.
c} The Windows system directory. The GetSystemDirectory function
retrieves the path of this directory.
d) The Windows directory. The GetWindowsDirectory function
retrieves the path of this directory.
e) The directories listed in the PATH environment variable.
4. To modify your own application settings, please DO FOLLOW th "DLL Hints"
at section IV "MORE HELPFUL POINTERS".
Section IV:
MORE HELPFUL POINTERS
=====================
Here are some notes that may be of help if you are not familiar with
using the Visual C++ Development Environment.
Project name and location issues:
The files in all.zip must end up in the hdf5\ directory installed by
hdf5-1_6_0.zip
If you must install all.dsw and all.dsp in another directory,
relative to hdf5\ , you will be asked to locate the sub-project
files, when you open the project all.dsw.
If you want to rename all (the entire project), you will need to
modify two files all.dsw and all.dsp as text (contrary to the
explicit warnings in the files).
You can also modify all.dsw and all.dsp as text, to allow these 2
files to be installed in another directory.
Settings... details:
If you create your own project, the necessary settings can be read
from the all.dsp file(as text), or from the Project Settings in the
Developer Studio project settings dialog.
Project
Settings
C/C++
Category
PreProcessor
Code Generation
Use run-time Library
These are all set to use
Single-Threaded
DLL... hints:
If you want to use DLL versions of hdf5 library in your application,
you should
1) put hdf5 DLL into windows system directory
2) add hdf5 DLL export library into your project
3) Follow "Settings... details" into the last line:
change Single-Threaded into Multithreaded DLL or
Debug Multithreaded DLL
4) Follow "Settings.. details" into PreProcessor:
Project
Settings
C/C++
Category
PreProcessor
Find PreProcessor definations and Add _HDF5USEDLL_ at the
end of the PreProcessor definations
Section V:
Disable gzip compression
============================================
If you would like to remove gzip compression from the hdf5 library
follow the steps below.
1) Open the H5pubconf.h file from the src directory and remove(or comment
out) the following two lines:
#define H5_HAVE_ZLIB_H 1
#define H5_HAVE_FILTER_DEFLATE 1
then save the file.
2) run-compile HDF5 library according to the previous steps.
Diable szip compression
=============================================
If you would like to remove szip compression from the hdf5 library
follow the steps below.
1) Open the H5pubconf.h file from the src directory and remove(or comment
out) the following two lines:
#define H5_HAVE_SZLIB_H 1
#define H5_HAVE_FILTER_SZIP 1
then save the file.
2) run-compile HDF5 library according to the previous steps.
Section VI:
How to build HDF5 in VS 7.0(.NET)
============================================
We just briefly introduce you how to build HDF5 in VS 7.0(.NET);
1. Open the old dataspace file with the "Open solution" option,
.NET will automatically convert the data space file to solution file.
2. Then find "Build" and go to "Configuration Manager"; choose "release"
or "debug", then choose "build all".
3. If you want to change some project setting, select the project and right
click the button to choose Properties; find the similar menu there as in 6.0.
4. You need to specify the zlib include header files and libraries under
Tools->Options->Projects->VC++ Directories and choose Include and libraries under
the category of "show directories for" to add the corresponding path.
Note: Currently we only build and test .NET on windows XP.
Section VII:
Build and test HDF5 snapshot release
Note: This section is only for users who would like to build and test HDF5 snapshot release.
If you want to test and build HDF5 snapshot release, you need extra steps to automatically
generate H5Tinit.c before going to section II step 1(2).
Previous step: section II, step 1(1).
Extra steps:
1) After extracting all.zip to the correct path, open the
c:\myHDFstuff\hdf5\misc\typegen\typegen.dsw.
2) Build the project file.
3) Invoke command prompt and go to c:\myHDFstuff\hdf5\src.
4) type H5Tinit.exe >H5Tinit.c
5) Go back to section II, continue with step 1(2).
Section VIII:
Misc.
1) drivers we support
The default driver on windows we support is sec2 driver. However, stdio driver
is also supported. If you want to use stdio driver in your application, you
may set environment variable HDF5_DRIVER to "stdio".
On windows 2000, the following steps should be followed to set environment
variable,
a) Go to Control panel and find "system",
b) Click "system" and choose "advanced",
c) Choose Environment Variables
d) Add new variable "HDF5_DRIVER"
e) set the "HDF5_DRIVER" to "stdio"
Reminder: if you don't want to use stdio driver, please remember to delete
the environment variable "HDF5_DRIVER" or change the variable value to "sec2".
Please send email to hdfhelp@ncsa.uiuc.edu for further assistance.
Reference in New Issue View Git Blame Copy Permalink