mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-12-09 07:32:32 +08:00
Code Issues Packages Projects Releases Wiki Activity
ab243bf369
hdf5/examples/Makefile.in
James Laird ab243bf369 [svn-r9920] Purpose: 
Bug fix

Description:
Found the permanant fix to automake/CVS dependency problem

Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should  be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.

Platforms tested:
heping sleipnir copper
2005-02-02 15:59:46 -05:00

557 lines
20 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
#
# HDF5 Library Examples Makefile(.in)
#
#------------------------------------------------------------ -*- makefile -*-
# The following section of this makefile comes from the
# `./config/commence' file which was generated with config.status
# from `./config/commence.in'.
#-----------------------------------------------------------------------------
#------------------------------------------------------------ -*- makefile -*-
# The following section of this makefile comes from the
# `./config/conclude' file which was generated with config.status
# from `./config/conclude.in'.
#-----------------------------------------------------------------------------
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
# Install directories that automake doesn't know about
includedir = $(exec_prefix)/include
# Set the paths for autotools to be correct on heping.
# Ideally, these tools should never be needed during the build.
ACLOCAL = /usr/bin/aclocal
AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf
AUTOMAKE = /usr/bin/automake
AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AWK = @AWK@
BUILD_PDB2HDF = @BUILD_PDB2HDF@
BYTESEX = @BYTESEX@
CC = @CC@
CC_VERSION = @CC_VERSION@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_LIBS = @DEFAULT_LIBS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO = @ECHO@
F77 = @F77@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FFLAGS = @FFLAGS@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
GASS = @GASS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HDF5_INTERFACES = @HDF5_INTERFACES@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZET = @HSIZET@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MPE = @MPE@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
PACKAGE = @PACKAGE@
PARALLEL = @PARALLEL@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SETX = @SETX@
SIZE_T = @SIZE_T@
SRB = @SRB@
SSL = @SSL@
STATIC_SHARED = @STATIC_SHARED@
STRIP = @STRIP@
TESTGASS = @TESTGASS@
TESTPARALLEL = @TESTPARALLEL@
TESTSRB = @TESTSRB@
TRACE_API = @TRACE_API@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
docdir = $(exec_prefix)/doc
# Scripts used to build examples
H5CC = $(bindir)/h5cc
H5CC_PP = $(bindir)/h5pcc
H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example
@BUILD_PARALLEL_CONDITIONAL_FALSE@TEST_PROG_PARA =
# Example programs.
# Don't tell automake about them, because if it knew they were programs,
# it would try to compile them instead of using the h5cc script.
# This creates some extra work for us.
#
# It might be possible to use automake's COMPILE variable to have it
# use h5cc properly (and h5fc and h5c++).
TEST_PROG = h5_write h5_read h5_extend_write h5_chunk_read h5_compound \
h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers
# Tell conclude.in boilerplate when to build the examples
EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG)
EXTRA_PROG = $(EXAMPLE_PROG)
# Install files
# List all file that should be installed in examples directory
INSTALL_FILES = h5_write.c h5_read.c h5_extend_write.c h5_chunk_read.c \
h5_compound.c h5_group.c h5_select.c h5_attribute.c h5_mount.c \
h5_reference.c h5_drivers.c ph5example.c
# We need to tell automake what to clean
CLEANFILES = *.h5 *.raw *.meta *.clog $(TEST_PROG) ph5example *.o
# How to install examples
# There are a lot of rules because automake does not know about
# the examples programs, and does not recognize the install-examples
# target.
EXAMPLEDIR = $(docdir)/hdf5/examples/c
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
subdir = examples
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
DIST_COMMON = Makefile.am Makefile.in
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign examples/Makefile
Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am: install-data-local
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am: installcheck-local
maintainer-clean: maintainer-clean-am
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
uninstall-am: uninstall-info-am uninstall-local
.PHONY: all all-am all-local check check-TESTS check-am clean \
clean-generic clean-libtool distclean distclean-generic \
distclean-libtool distdir dvi dvi-am info info-am install \
install-am install-data install-data-am install-data-local \
install-exec install-exec-am install-info install-info-am \
install-man install-strip installcheck installcheck-am \
installcheck-local installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool uninstall uninstall-am uninstall-info-am \
uninstall-local
# Additional dependencies for each program are listed below.
$(EXTRA_PROG): $(LIBHDF5)
@BUILD_PARALLEL_CONDITIONAL_TRUE@ $(H5CC_PP) $(CFLAGS) -o $@ $(srcdir)/$@.c;
@BUILD_PARALLEL_CONDITIONAL_FALSE@ $(H5CC) $(CFLAGS) -o $@ $(srcdir)/$@.c;
$(EXAMPLEDIR):
-$(top_srcdir)/bin/mkdirs $@
install-data-local:
$(MAKE) install-examples
uninstall-local:
$(MAKE) uninstall-examples
# We want to install the source files, not the examples themselves. Add '.c' to
# each example to get its source. This is a bit kludgy.
install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
@for f in X $(INSTALL_FILES); do \
if test $$f != X; then \
(set -x; $(INSTALL) $(top_srcdir)/examples/$$f $(EXAMPLEDIR)/. || exit 1);\
fi; \
done
uninstall-examples:
@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \
set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES).c; \
fi
check-install:
$(MAKE) installcheck
installcheck-local:
$(MAKE) check
# List dependencies for each program. Normally, automake would take
# care of this for us, but if we tell automake about the programs it
# will try to build them with the normal C compiler, not h5cc. This is
# an inelegant way of solving the problem.
# All programs share the same build rule and a dependency on the main hdf5
# library above.
h5_chunk_read: $(srcdir)/h5_chunk_read.c
h5_compound: $(srcdir)/h5_compound.c
h5_extend_write: $(srcdir)/h5_extend_write.c
h5_group: $(srcdir)/h5_group.c
h5_write: $(srcdir)/h5_write.c
h5_read: $(srcdir)/h5_read.c
h5_select: $(srcdir)/h5_select.c
h5_attribute: $(srcdir)/h5_attribute.c
h5_mount: $(srcdir)/h5_mount.c
h5_reference: $(srcdir)/h5_reference.c
h5_drivers: $(srcdir)/h5_drivers.c
ph5example: $(srcdir)/ph5example.c
h5_dtransform: $(srcdir)/h5_dtransform.c
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(TESTS)
lib progs tests ::
@$(MAKE) build-$@ || exit 1; \
for d in X $(SUBDIRS); do \
if test $$d != X -a $$d != .; then \
(set -x; cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
install-doc uninstall-doc:
@echo "Nothing to be done."
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test: $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \
echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@for test in $(TEST_PROG) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNTEST) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPT) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
/bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \
echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd:
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
HDF5_DRIVER=$$vfd $(MAKE) check; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink