mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-11-21 01:04:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
a7073e240e
hdf5/configure.in
Quincey Koziol d86b3c0205 [svn-r9410] Purpose: 
Code cleanup

Description:
    Update FORTRAN configuration test code to be more syntacticly correct
and not generate errors with stricter standards checking in the compiler.

Platforms tested:
    Linux 2.4 (verbena)
    Too minor to require h5committest
2004-10-12 15:49:28 -05:00

3159 lines
92 KiB
Plaintext
Raw Blame History

dnl Process this file with autoconf to produce configure.
dnl
dnl Copyright by the Board of Trustees of the University of Illinois.
dnl All rights reserved.
dnl
dnl This file is part of HDF5. The full HDF5 copyright notice, including
dnl terms governing use, modification, and redistribution, is contained in
dnl the files COPYING and Copyright.html. COPYING can be found at the root
dnl of the source code distribution tree; Copyright.html can be found at the
dnl root level of an installed copy of the electronic HDF5 document set and
dnl is linked from the top-level documents page. It can also be found at
dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
dnl ----------------------------------------------------------------------
dnl Initialize configure.
dnl
AC_REVISION($Id$)
AC_PREREQ([2.53])
dnl AC_INIT takes the name of the package, the version number, and an
dnl email address to report bugs. AC_CONFIG_SRCDIR takes a unique file
dnl as its argument.
dnl
dnl NOTE: Don't forget to change the version number here when we do a
dnl release!!!
dnl
AC_INIT([HDF5], [1.7.40], [hdfhelp@ncsa.uiuc.edu])
AC_CONFIG_SRCDIR([src/H5.c])
AC_CONFIG_HEADER([src/H5config.h])
AC_CONFIG_AUX_DIR([bin])
AC_OUTPUT_COMMANDS([
echo "creating src/H5pubconf.h"
sed 's/#define /#define H5_/' <src/H5config.h |\
sed 's/#undef /#undef H5_/' >pubconf
if test ! -f src/H5pubconf.h; then
/bin/mv -f pubconf src/H5pubconf.h
elif (diff pubconf src/H5pubconf.h >/dev/null); then
/bin/rm -f pubconf
echo "src/H5pubconf.h is unchanged"
else
/bin/mv -f pubconf src/H5pubconf.h
fi
])
AC_CANONICAL_HOST
AC_SUBST([CPPFLAGS])
dnl Different compilers may need default libraries. They are specified in
dnl the config/* files, so we put this statement here so that it'll be
dnl set by the code which follows...
dnl
AC_SUBST(DEFAULT_LIBS) DEFAULT_LIBS=""
dnl ----------------------------------------------------------------------
dnl Set prefix default (install directory) to a directory in the build area.
dnl This allows multiple src-dir builds within one host.
AC_PREFIX_DEFAULT([`pwd`/hdf5])
dnl ----------------------------------------------------------------------
dnl Dump all shell variables values.
dnl
AC_MSG_CHECKING([shell variables initial values])
set >&AS_MESSAGE_LOG_FD
AC_MSG_RESULT([done])
dnl ----------------------------------------------------------------------
dnl Some platforms have broken tr, basename, and/or xargs programs. Check
dnl that it actually does what it's supposed to do. Catch this early
dnl since configure relies upon tr heavily and there's no use continuing
dnl if it's broken.
dnl
AC_MSG_CHECKING([if tr works])
TR_TEST="`echo Test | tr 'a-z,' 'A-Z '`"
if test $TR_TEST != "TEST"; then
AC_MSG_ERROR([tr program doesn't work])
else
AC_MSG_RESULT([yes])
fi
AC_MSG_CHECKING([if basename works])
BASENAME_TEST="`basename /foo/bar/baz/qux/basename_works`"
if test $BASENAME_TEST != "basename_works"; then
AC_MSG_ERROR([basename program doesn't work])
else
AC_MSG_RESULT([yes])
fi
AC_MSG_CHECKING([if xargs works])
XARGS_TEST="`echo /foo/bar/baz/qux/xargs_works | xargs basename`"
if test $XARGS_TEST != "xargs_works"; then
AC_MSG_ERROR([xargs program doesn't work])
else
AC_MSG_RESULT([yes])
fi
dnl ----------------------------------------------------------------------
dnl Check that the cache file was build on the same host as what we're
dnl running on now.
dnl
AC_CACHE_CHECK([for cached host], [hdf5_cv_host], [hdf5_cv_host="none"]);
if test $hdf5_cv_host = "none"; then
hdf5_cv_host=$host
elif test $hdf5_cv_host != $host; then
echo "The config.cache file was generated on $hdf5_cv_host but"
echo "this is $host. Please remove that file and try again."
AC_MSG_ERROR(config.cache file is invalid)
fi
dnl ----------------------------------------------------------------------
dnl Source any special files that we need. These files normally aren't
dnl present but can be used by the maintainers to fine tune things like
dnl turning on debug or profiling flags for the compiler. The search order
dnl is:
dnl
dnl CPU-VENDOR-OS
dnl VENDOR-OS
dnl CPU-OS
dnl CPU-VENDOR
dnl OS
dnl VENDOR
dnl CPU
dnl
dnl If the `OS' ends with a version number then remove it. For instance,
dnl `freebsd3.1' would become `freebsd'
case $host_os in
aix4.*)
host_os_novers=aix4.x
;;
aix5.*)
host_os_novers=aix5.x
;;
freebsd*)
host_os_novers=freebsd
;;
irix5.*)
host_os_novers=irix5.x
;;
irix6.*)
host_os_novers=irix6.x
;;
osf4.*)
host_os_novers=osf4.x
;;
osf5.*)
host_os_novers=osf5.x
;;
solaris2.*)
host_os_novers=solaris2.x
;;
*)
host_os_novers=$host_os
;;
esac
AC_ARG_ENABLE([hsizet],
[AC_HELP_STRING([--disable-hsizet],
[Datasets can normally be larger than
memory and/or files but some compilers are
unable to handle this (including versions
of GCC before 2.8.0). Disabling the
feature causes dataset sizes to be
restricted to the size of core memory, or
'size_t'.])],
[HSIZET=$enableval])
AC_MSG_CHECKING([for sizeof hsize_t and hssize_t])
AC_SUBST(HSIZET)
case $HSIZET in
no|small)
AC_MSG_RESULT([small])
HSIZET=small
;;
*)
AC_MSG_RESULT([large])
HSIZET=large
AC_DEFINE([HAVE_LARGE_HSIZET], [1],
[Define if it's safe to use \`long long' for hsize_t and hssize_t])
;;
esac
host_config="none"
for f in $host_cpu-$host_vendor-$host_os \
$host_cpu-$host_vendor-$host_os_novers \
$host_vendor-$host_os \
$host_vendor-$host_os_novers \
$host_cpu-$host_os \
$host_cpu-$host_os_novers \
$host_cpu-$host_vendor \
$host_os \
$host_os_novers \
$host_vendor \
$host_cpu ; do
AC_MSG_CHECKING([for config $f])
if test -f "$srcdir/config/$f"; then
host_config=$srcdir/config/$f
AC_MSG_RESULT([found])
break
fi
AC_MSG_RESULT([no])
done
if test "X$host_config" != "Xnone"; then
CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`"
. $host_config
fi
dnl Source any special site-specific file
hname="`hostname`"
while test -n "$hname"; do
file=$srcdir/config/site-specific/host-$hname
AC_MSG_CHECKING([for config $file])
if test -f "$file"; then
. $file
AC_MSG_RESULT([found])
break
fi
AC_MSG_RESULT([no])
hname_tmp=$hname
hname="`echo $hname | cut -d. -f2-99`"
test "$hname_tmp" = "$hname" && break
done
dnl ----------------------------------------------------------------------
dnl Check for programs.
dnl
AC_PROG_CC
CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`"
AC_PROG_MAKE_SET
AC_PROG_INSTALL
AC_LIBTOOL_DLOPEN
AC_PROG_LIBTOOL
dnl ----------------------------------------------------------------------
dnl Check if they would like the Fortran interface compiled
dnl
AC_SUBST([HDF5_INTERFACES]) HDF5_INTERFACES=""
AC_MSG_CHECKING([if Fortran interface enabled])
AC_ARG_ENABLE([fortran],
[AC_HELP_STRING([--enable-fortran],
[Compile the Fortran interface [default=no]])],
[HDF_FORTRAN=$enableval])
if test "X$HDF_FORTRAN" = "Xyes"; then
echo "yes"
HDF5_INTERFACES="$HDF5_INTERFACES fortran"
dnl --------------------------------------------------------------------
dnl HDF5 integer variables for the H5fortran_types.f90 file.
dnl
AC_SUBST([R_LARGE])
AC_SUBST([R_INTEGER])
AC_SUBST([HSIZE_T])
AC_SUBST([HSSIZE_T])
AC_SUBST([HID_T])
AC_SUBST([SIZE_T])
AC_SUBST([OBJECT_NAMELEN_DEFAULT_F])
dnl --------------------------------------------------------------------
dnl General Fortran flags
dnl
AC_SUBST([FFLAGS])
AC_SUBST([F9XSUFFIXFLAG])
AC_SUBST([FSEARCH_DIRS])
dnl --------------------------------------------------------------------
dnl Check for a Fortran 9X compiler and how to include modules.
dnl
AC_PROG_F9X
AC_F9X_MODS
dnl Change to the Fortran 90 language
AC_LANG_FORTRAN9X
dnl --------------------------------------------------------------------
dnl See if the compiler will support the "-I." option
dnl
FFLAGS_saved=$FFLAGS
FFLAGS="$FFLAGS -I."
AC_MSG_CHECKING(if compiler supports -I. option)
AC_TRY_FCOMPILE([
program conftest
end
], AC_MSG_RESULT(yes),
AC_MSG_RESULT(no)
FFLAGS="$FFLAGS_saved")
dnl Change to the C language
AC_LANG_C
else
echo "no"
fi
dnl ----------------------------------------------------------------------
dnl Check if they would like the C++ interface compiled
dnl
AC_MSG_CHECKING([if c++ interface enabled])
AC_ARG_ENABLE([cxx],
[AC_HELP_STRING([--enable-cxx],
[Compile the C++ interface [default=no]])],
[HDF_CXX=$enableval])
if test "X$HDF_CXX" = "Xyes"; then
echo "yes"
HDF5_INTERFACES="$HDF5_INTERFACES c++"
AC_PROG_CXX
AC_PROG_CXXCPP dnl this is checked for when AC_HEADER_STDC is done
dnl Change to the C++ language
AC_LANG_CPLUSPLUS
AC_MSG_CHECKING([if $CXX needs old style header files in includes])
AC_TRY_RUN([
#include <iostream>
int main(void) { return 0; }
], [
echo no
], [
echo yes
CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME"
])
AC_MSG_CHECKING([if $CXX can handle namespaces])
AC_TRY_RUN([
namespace H5 {
int fnord;
}
int main(void) {
using namespace H5;
fnord = 37;
return 0;
}
], [
echo yes
], [
echo no
CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE"
])
AC_MSG_CHECKING([if $CXX supports std])
AC_TRY_RUN([
#include <string>
using namespace std;
int main(void) {
string myString("testing namespace std");
return 0;
}
], [
echo yes
], [
echo no
CXXFLAGS="${CXXFLAGS} -DH5_NO_STD"
])
AC_MSG_CHECKING([if $CXX supports bool types])
AC_TRY_RUN([
int main(void) {
bool flag;
return 0;
}
], [
echo yes
], [
echo no
CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED"
])
AC_MSG_CHECKING([if $CXX can handle static cast])
AC_TRY_RUN([
int main(void) {
float test_float;
int test_int;
test_float = 37.0;
test_int = static_cast <int> (test_float);
return 0;
}
], [
echo yes
], [
echo no
CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST"
])
dnl Change to the C language
AC_LANG_C
else
echo "no"
fi
dnl ----------------------------------------------------------------------
dnl If we should build only static executables
dnl
AC_MSG_CHECKING([if should build only statically linked executables])
AC_ARG_ENABLE([static_exec],
[AC_HELP_STRING([--enable-static-exec],
[Build only statically linked executables
[default=no]])],
[STATIC_EXEC=$enableval])
if test "X$STATIC_EXEC" = "Xyes"; then
echo "yes"
LT_STATIC_EXEC="-all-static"
else
echo "no"
LT_STATIC_EXEC=""
fi
AC_SUBST([LT_STATIC_EXEC])
dnl ----------------------------------------------------------------------
dnl Check if they have Perl installed on their system. We only need Perl
dnl if they're using a GNU compiler.
dnl
AC_SUBST([PERL]) PERL=""
if test "X$GCC" = "Xyes"; then
AC_CHECK_PROGS([PERL], [perl],, [$PATH])
fi
dnl ----------------------------------------------------------------------
dnl Check which archiving tool to use. This needs to be done before
dnl the AC_PROG_LIBTOOL macro.
dnl
if test -z "$AR"; then
AC_CHECK_PROGS([AR], [ar xar], [:], [$PATH])
fi
AC_SUBST([AR])
dnl Export the AR macro so that it will be placed in the libtool file
dnl correctly.
export AR
dnl Post processing to patch up some deficiencies in libtool
case $host_os in
linux*)
# If gcc is not used, need to set $wl to use "-Wl,"
if $CC -v 2>&1 | grep '^gcc' > /dev/null ; then
: using gcc
else
echo 'fixing $wl in' $ofile
ed - $ofile <<EOF 2> /dev/null
/^wl=""/s//wl="-Wl,"/
w
q
EOF
fi
;;
esac
dnl Fix up the INSTALL macro if it's a relative path. We want the
dnl full-path to the binary instead.
case "$INSTALL" in
*install-sh*)
INSTALL='\${top_srcdir}/bin/install-sh -c'
;;
esac
AC_MSG_CHECKING([make])
AC_SUBST_FILE([DEPEND])
if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
sed -n 1p|cut -c1-8`" = "GNU Make"; then
AC_MSG_RESULT([GNU make])
GMAKE=yes
if test "X$GCC" = "Xyes"; then
DEPEND=config/depend1
else
DEPEND=config/depend2
fi
else
AC_MSG_RESULT([generic])
fi
dnl How do we include another file into a Makefile?
if test -z "$DEPEND"; then
AC_MSG_CHECKING([how to include a makefile])
dnl The include file contains the target for `foo'
cat >makeinc <<EOF
foo:
@:
EOF
while true; do #for break
dnl pmake. We have to be careful because some pmake think that the
dnl contents of the MAKE environment variable is a target.
echo '.include <makeinc>' >maketest
if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
AC_MSG_RESULT([.include <FILE>])
DEPEND=config/depend3
break
fi
dnl Most make's use `include FILE'
echo 'include makeinc' >maketest
if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
AC_MSG_RESULT([include FILE])
DEPEND=config/depend4
break;
fi
dnl default
AC_MSG_RESULT([you have a deficient make command])
DEPEND=config/dependN
break
done
rm makeinc maketest
fi
dnl ----------------------------------------------------------------------
dnl Sometimes makes think the `.PATH:' appearing before the first rule
dnl with an action should override the `all' default target. So we have
dnl to decide what the proper syntax is.
dnl
AC_MSG_CHECKING([how make searches directories])
while true; do #for break
# The most common method is `VPATH=DIR1 DIR2 ...'
cat >maketest <<EOF
VPATH=$srcdir/config $srcdir/src $srcdir/bin
.c.o:
cp $< H5.o
foo: H5.o
/bin/rm -f H5.o
@echo works
EOF
if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
SEARCH_RULE='VPATH='
SEARCH_SEP=' '
AC_MSG_RESULT([VPATH=DIR1 DIR2 ...])
break
fi
dnl The second most common method is like above except with the
dnl directories separated by colons.
cat >maketest <<EOF
VPATH=$srcdir/config:$srcdir/src:$srcdir/bin
.c.o:
cp $< H5.o
foo: H5.o
/bin/rm -f H5.o
@echo works
EOF
if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
SEARCH_RULE='VPATH='
SEARCH_SEP=':'
AC_MSG_RESULT([VPATH=DIR1:DIR2:...])
break
fi
dnl pmake uses the construct `.PATH: DIR1 DIR2
cat >maketest <<EOF
.PATH: $srcdir/config $srcdir/src $srcdir/bin
.c.o:
cp $< H5.o
foo: H5.o
/bin/rm -f H5.o
@echo works
EOF
if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
SEARCH_RULE='.PATH: '
SEARCH_SEP=' '
AC_MSG_RESULT([.PATH: DIR1 DIR2 ...])
break
fi
dnl No way for make to search directories
SEARCH_RULE='## SEARCH DISABLED: '
SEARCH_SEP=' '
AC_MSG_RESULT([it doesn't])
if test ! -f configure; then
AC_MSG_ERROR([${MAKE-make} requires the build and source directories to be the same])
fi
break
done
rm maketest
dnl ----------------------------------------------------------------------
dnl Production flags? Save the value in $CONFIG_MODE so we have it for
dnl the record.
dnl
AC_MSG_CHECKING(for production mode)
AC_ARG_ENABLE(production,
[AC_HELP_STRING([--enable-production],
[Determines how to run the compiler.])])
case "X-$enable_production" in
X-yes)
enable_production="yes"
AC_MSG_RESULT([production])
dnl Remove the "-g" flag from CFLAGS if it's in there.
dnl
CFLAGS_temp=""
if test -n "$CFLAGS"; then
for d in $CFLAGS ; do
if test "X$d" != "X-g"; then
CFLAGS_temp="$CFLAGS_temp $d"
fi
done
CFLAGS=$CFLAGS_temp
fi
CXXFLAGS_temp=""
if test -n "$CXXFLAGS"; then
for d in $CXXFLAGS ; do
if test "X$d" != "X-g"; then
CXXFLAGS_temp="$CXXFLAGS_temp $d"
fi
done
CXXFLAGS=$CXXFLAGS_temp
fi
FFLAGS_temp=""
if test -n "$FFLAGS"; then
for d in $FFLAGS ; do
if test "X$d" != "X-g"; then
FFLAGS_temp="$FFLAGS_temp $d"
fi
done
FFLAGS=$FFLAGS_temp
fi
CONFIG_MODE=production
CFLAGS="$CFLAGS $PROD_CFLAGS"
CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS"
CXXFLAGS="$CXXFLAGS $PROD_CXXFLAGS"
FFLAGS="$FFLAGS $PROD_FFLAGS"
;;
X-|X-no)
enable_production="no"
AC_MSG_RESULT([development])
CONFIG_MODE=development
CFLAGS="$CFLAGS $DEBUG_CFLAGS"
CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS"
CXXFLAGS="$CXXFLAGS $DEBUG_CXXFLAGS"
FFLAGS="$FFLAGS $DEBUG_FFLAGS"
;;
X-pg|X-profile)
enable_production="profile"
AC_MSG_RESULT([profile])
CONFIG_MODE=profile
CFLAGS="$CFLAGS $PROFILE_CFLAGS"
CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS"
CXXFLAGS="$CXXFLAGS $PROFILE_CXXFLAGS"
FFLAGS="$FFLAGS $PROFILE_FFLAGS"
;;
*)
enable_production="user-defined"
AC_MSG_RESULT([user-defined])
CONFIG_MODE="$X-enableval"
;;
esac
dnl ----------------------------------------------------------------------
dnl Check for system libraries.
dnl
AC_CHECK_LIB([m], [ceil])
if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then
dnl ...for Solaris
AC_CHECK_LIB([nsl], [xdr_int])
fi
dnl AC_CHECK_LIB([coug], [main]) dnl ...for ASCI/Red
dnl ----------------------------------------------------------------------
dnl Check for system header files.
dnl
AC_HEADER_STDC
AC_HEADER_TIME
dnl ----------------------------------------------------------------------
dnl Check for these two functions before <sys/time.h> is checked for, otherwise
dnl they are not detected correctly on Solaris [2.6].
dnl
AC_CHECK_FUNCS(difftime)
AC_CHECK_FUNCS(gettimeofday, [have_gettime="yes"], [have_gettime="no"])
dnl Unix
AC_CHECK_HEADERS([sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h])
AC_CHECK_HEADERS([sys/socket.h sys/types.h])
AC_CHECK_HEADERS([stddef.h setjmp.h features.h])
AC_CHECK_HEADERS([stdint.h], [C9x=yes])
dnl Windows
AC_CHECK_HEADERS([io.h winsock.h sys/timeb.h])
case "$host" in
alpha*-dec*-osf*)
dnl The <sys/sysinfo.h> and <sys/proc.h> are needed on the DEC
dnl Alpha to turn off UAC fixing. We do *not* attempt to
dnl locate these files on other systems because there are too
dnl many problems with including them.
AC_CHECK_HEADERS([sys/sysinfo.h sys/proc.h])
;;
mips*-sgi*-irix*)
dnl The <sys/fpu.h> is needed on the SGI machines to turn off
dnl denormalized floating-point values going to zero. We do *not*
dnl attempt to dnl locate these files on other systems because there
dnl may be problems with including them.
AC_CHECK_HEADERS([sys/fpu.h])
AC_CHECK_FUNCS([get_fpc_csr])
;;
esac
dnl ----------------------------------------------------------------------
dnl Test for 64bit stuff before the data types and their sizes. The
dnl result could effect the outcome of the sizeof macros below.
dnl
case "$host_cpu-$host_vendor-$host_os" in
*linux*)
dnl ----------------------------------------------------------------------
dnl Enable large file support on linux? Store the result in the LINUX_LFS
dnl variable for posterity
AC_ARG_ENABLE([linux-lfs],
[AC_HELP_STRING([--enable-linux-lfs],
[Enable support for large (64-bit)
files on Linux. [default=check]])])
LINUX_LFS="no"
case "X-$enable_linux_lfs" in
X-yes)
LINUX_LFS=yes
;;
X-no)
;;
X-|*)
MAJOR_VER="`uname -r | cut -d '.' -f1`"
MINOR_VER="`uname -r | cut -d '.' -f2`"
if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then
LINUX_LFS="yes"
fi
;;
esac
AC_MSG_CHECKING([for large file support mode on Linux])
if test "X$LINUX_LFS" = "Xyes"; then
AC_MSG_RESULT([enabled])
CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS"
else
AC_MSG_RESULT([disabled])
fi
dnl Add POSIX support on Linux systems, so <features.h> defines
dnl __USE_POSIX, which is required to get the prototype for fdopen
dnl defined correctly in <stdio.h>
CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS"
dnl Also add BSD support on Linux systems, so <features.h> defines
dnl __USE_BSD, which is required to get the prototype for strdup
dnl defined correctly in <string.h> and snprintf & vsnprintf defined
dnl correctly in <stdio.h>
CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS"
;;
esac
AC_TRY_COMPILE([#include <sys/types.h>],
[off64_t n = 0;],
[AC_CHECK_FUNCS([lseek64 fseek64])],
[AC_MSG_RESULT([skipping test for lseek64() and fseek64()])])
dnl ----------------------------------------------------------------------
dnl Data types and their sizes.
dnl
AC_TYPE_OFF_T
AC_CHECK_TYPE([size_t], [unsigned long])
AC_CHECK_TYPE([ssize_t], [long])
AC_C_BIGENDIAN
AC_CHECK_SIZEOF([char], [1])
AC_CHECK_SIZEOF([short], [2])
AC_CHECK_SIZEOF([int], [4])
AC_CHECK_SIZEOF([long], [4])
AC_CHECK_SIZEOF([long long], [8])
AC_CHECK_SIZEOF([__int64], [8])
AC_CHECK_SIZEOF([float], [4])
AC_CHECK_SIZEOF([double], [8])
AC_CHECK_SIZEOF([long double], [8])
dnl Checkpoint the cache
AC_CACHE_SAVE
dnl Posix.1g types (C9x)
cat >>confdefs.h <<\EOF
#include <sys/types.h>
EOF
if test "X$C9x" = "Xyes"; then
cat >>confdefs.h <<\EOF
#include <stdint.h>
EOF
fi
AC_CHECK_SIZEOF( int8_t, [1])
AC_CHECK_SIZEOF( uint8_t, [1])
AC_CHECK_SIZEOF( int_least8_t, [1])
AC_CHECK_SIZEOF( uint_least8_t, [1])
AC_CHECK_SIZEOF( int_fast8_t, [1])
AC_CHECK_SIZEOF( uint_fast8_t, [1])
AC_CHECK_SIZEOF( int16_t, [2])
AC_CHECK_SIZEOF( uint16_t, [2])
AC_CHECK_SIZEOF( int_least16_t, [2])
AC_CHECK_SIZEOF(uint_least16_t, [2])
AC_CHECK_SIZEOF( int_fast16_t, [2])
AC_CHECK_SIZEOF( uint_fast16_t, [2])
AC_CHECK_SIZEOF( int32_t, [4])
AC_CHECK_SIZEOF( uint32_t, [4])
AC_CHECK_SIZEOF( int_least32_t, [4])
AC_CHECK_SIZEOF(uint_least32_t, [4])
AC_CHECK_SIZEOF( int_fast32_t, [4])
AC_CHECK_SIZEOF( uint_fast32_t, [4])
AC_CHECK_SIZEOF( int64_t, [8])
AC_CHECK_SIZEOF( uint64_t, [8])
AC_CHECK_SIZEOF( int_least64_t, [8])
AC_CHECK_SIZEOF(uint_least64_t, [8])
AC_CHECK_SIZEOF( int_fast64_t, [8])
AC_CHECK_SIZEOF( uint_fast64_t, [8])
AC_CHECK_SIZEOF([size_t], [4])
AC_CHECK_SIZEOF([ssize_t], [4])
cat >>confdefs.h <<\EOF
#include <sys/types.h> /*for off_t definition*/
EOF
AC_CHECK_SIZEOF([off_t], [4])
dnl Checkpoint the cache
AC_CACHE_SAVE
dnl ----------------------------------------------------------------------
dnl Check if the dev_t type is a scalar type (must come after the check for
dnl sys/types.h)
AC_MSG_CHECKING([if dev_t is scalar])
AC_TRY_COMPILE([
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
],
[dev_t d1, d2; if(d1==d2) return 0;],
AC_DEFINE([DEV_T_IS_SCALAR], [1],
[Define if \`dev_t' is a scalar])
AC_MSG_RESULT(yes),
AC_MSG_RESULT(no)
)
dnl ----------------------------------------------------------------------
dnl Fake --with-xxx option to allow us to create a help message for the
dnl following --with-xxx options which can take either a =DIR or =INC,LIB
dnl specifier.
dnl
AC_ARG_WITH([fnord],
[
For the following --with-xxx options, you can specify where the header
files and libraries are in two different ways:
--with-xxx=INC,LIB - Specify individually the include directory and
library directory separated by a comma
--with-xxx=DIR - Specify only the directory which contains the
include/ and lib/ subdirectories
])
dnl ----------------------------------------------------------------------
dnl Is the dmalloc present? It has a header file `dmalloc.h' and a library
dnl `-ldmalloc' and their locations might be specified with the `--with-dmalloc'
dnl command-line switch. The value is an include path and/or a library path.
dnl If the library path is specified then it must be preceded by a comma.
dnl
AC_ARG_WITH([dmalloc],
[AC_HELP_STRING([--with-dmalloc=DIR],
[Use dmalloc memory debugging aid [default=no]])],,
withval=no)
case $withval in
yes)
HAVE_DMALLOC="yes"
AC_CHECK_HEADERS(dmalloc.h)
AC_CHECK_LIB(dmalloc, dmalloc_shutdown,, unset HAVE_DMALLOC)
if test -z "$HAVE_DMALLOC" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR(couldn't find dmalloc library)
fi
;;
no)
HAVE_DMALLOC="no"
AC_MSG_CHECKING(for dmalloc library)
AC_MSG_RESULT(suppressed)
;;
*)
HAVE_DMALLOC="yes"
case "$withval" in
*,*)
dmalloc_inc="`echo $withval |cut -f1 -d,`"
dmalloc_lib="`echo $withval |cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
dmalloc_inc="$withval/include"
dmalloc_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$dmalloc_inc" = "X/usr/include"; then
dmalloc_inc=""
fi
if test "X$dmalloc_lib" = "X/usr/lib"; then
dmalloc_lib=""
fi
saved_CPPFLAGS="$CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
if test -n "$dmalloc_inc"; then
CPPFLAGS="$CPPFLAGS -I$dmalloc_inc"
fi
AC_CHECK_HEADERS(dmalloc.h,, CPPFLAGS="$saved_CPPFLAGS")
if test -n "$dmalloc_lib"; then
LDFLAGS="$LDFLAGS -L$dmalloc_lib"
fi
AC_CHECK_LIB(dmalloc, dmalloc_shutdown,, LDFLAGS="$saved_LDFLAGS"; unset HAVE_DMALLOC)
if test -z "$HAVE_DMALLOC" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR(couldn't find dmalloc library)
fi
;;
esac
dnl ----------------------------------------------------------------------
dnl Is the GNU zlib present? It has a header file `zlib.h' and a library
dnl `-lz' and their locations might be specified with the `--with-zlib'
dnl command-line switch. The value is an include path and/or a library path.
dnl If the library path is specified then it must be preceded by a comma.
dnl
AC_SUBST(USE_FILTER_DEFLATE) USE_FILTER_DEFLATE="no"
AC_ARG_WITH([zlib],
[AC_HELP_STRING([--with-zlib=DIR],
[Use zlib library for external deflate I/O
filter [default=yes]])],,
withval=yes)
case $withval in
yes)
HAVE_ZLIB="yes"
AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"])
AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB])
AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])
if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find zlib library])
fi
;;
no)
HAVE_ZLIB="no"
AC_MSG_CHECKING([for GNU zlib])
AC_MSG_RESULT([suppressed])
;;
*)
HAVE_ZLIB="yes"
case "$withval" in
*,*)
zlib_inc="`echo $withval |cut -f1 -d,`"
zlib_lib="`echo $withval |cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
zlib_inc="$withval/include"
zlib_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$zlib_inc" = "X/usr/include"; then
zlib_inc=""
fi
if test "X$zlib_lib" = "X/usr/lib"; then
zlib_lib=""
fi
saved_CPPFLAGS="$CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
if test -n "$zlib_inc"; then
CPPFLAGS="$CPPFLAGS -I$zlib_inc"
fi
AC_CHECK_HEADERS([zlib.h],
[HAVE_ZLIB_H="yes"],
[CPPFLAGS="$saved_CPPFLAGS"])
if test -n "$zlib_lib"; then
LDFLAGS="$LDFLAGS -L$zlib_lib"
fi
AC_CHECK_LIB([z], [compress2],,
[LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB])
AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])
if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find zlib library])
fi
;;
esac
if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then
AC_DEFINE([HAVE_FILTER_DEFLATE], [1], [Define if support for deflate filter is enabled])
USE_FILTER_DEFLATE="yes"
dnl Add "deflate" to external filter list
if test "X$EXTERNAL_FILTERS" != "X"; then
EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
fi
EXTERNAL_FILTERS="${EXTERNAL_FILTERS}deflate"
fi
dnl ----------------------------------------------------------------------
dnl Is the szlib present? It has a header file `szlib.h' and a library
dnl `-lsz' and their locations might be specified with the `--with-szlib'
dnl command-line switch. The value is an include path and/or a library path.
dnl If the library path is specified then it must be preceded by a comma.
dnl
AC_SUBST(USE_FILTER_SZIP) USE_FILTER_SZIP="no"
AC_SUBST(USE_FILTER_SZIP_ENCODER) USE_FILTER_SZIP_ENCODER="no"
AC_ARG_WITH([szlib],
[AC_HELP_STRING([--with-szlib=DIR],
[Use szlib library for external szlib I/O
filter [default=no]])],,
withval=no)
case $withval in
yes)
HAVE_SZLIB="yes"
AC_CHECK_HEADERS([szlib.h], [HAVE_SZLIB_H="yes"])
AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, [unset HAVE_SZLIB])
if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find szlib library])
fi
;;
no)
HAVE_SZLIB="no"
AC_MSG_CHECKING([for szlib])
AC_MSG_RESULT([suppressed])
;;
*)
HAVE_SZLIB="yes"
case "$withval" in
*,*)
szlib_inc="`echo $withval |cut -f1 -d,`"
szlib_lib="`echo $withval |cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
szlib_inc="$withval/include"
szlib_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$szlib_inc" = "X/usr/include"; then
szlib_inc=""
fi
if test "X$szlib_lib" = "X/usr/lib"; then
szlib_lib=""
fi
saved_CPPFLAGS="$CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
if test -n "$szlib_inc"; then
CPPFLAGS="$CPPFLAGS -I$szlib_inc"
fi
AC_CHECK_HEADERS([szlib.h],
[HAVE_SZLIB_H="yes"],
[CPPFLAGS="$saved_CPPFLAGS"])
if test -n "$szlib_lib"; then
LDFLAGS="$LDFLAGS -L$szlib_lib"
fi
AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],,
[LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB])
if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find szlib library])
fi
;;
esac
if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
AC_DEFINE(HAVE_FILTER_SZIP, 1,
[Define if support for szip filter is enabled])
USE_FILTER_SZIP="yes"
dnl SZLIB library is available. Check if it can encode
AC_MSG_CHECKING([for szlib encoder])
AC_CACHE_VAL([hdf5_cv_szlib_can_encode],
[AC_TRY_RUN([
#include <szlib.h>
int main(void)
{
/* SZ_encoder_enabled returns 1 if encoder is present */
if(SZ_encoder_enabled() == 1)
exit(0);
else
exit(1);
}
], [hdf5_cv_szlib_can_encode=yes], [hdf5_cv_szlib_can_encode=no],)])
if test ${hdf5_cv_szlib_can_encode} = "yes"; then
AC_DEFINE([SZIP_CAN_ENCODE], [1],
[Define if szip encoder is present])
AC_MSG_RESULT([yes])
USE_FILTER_SZIP_ENCODER="yes"
else
AC_MSG_RESULT([no])
fi
dnl Add "szip" to external filter list
if test "X$EXTERNAL_FILTERS" != "X"; then
EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
fi
EXTERNAL_FILTERS="${EXTERNAL_FILTERS}szip"
fi
dnl ----------------------------------------------------------------------
dnl Pablo Configuration
dnl
AC_SUBST(PABLO) PABLO=""
AC_SUBST(HAVE_PABLO) HAVE_PABLO="no"
AC_ARG_WITH([pablo],
[AC_HELP_STRING([--with-pablo=DIR],
[Use the Pablo library [default=no]])],,
withval=no)
AC_MSG_CHECKING([for Pablo])
case "$withval" in
yes)
AC_MSG_RESULT(yes)
HAVE_PABLO="yes"
PABLO="pablo"
;;
no)
AC_MSG_RESULT(suppressed)
;;
*)
case "$withval" in
*,*)
pablo_inc="`echo $withval | cut -f1 -d,`"
pablo_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
pablo_inc="$withval/include"
pablo_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$pablo_inc" = "X/usr/include"; then
pablo_inc=""
fi
if test "X$pablo_lib" = "X/usr/lib"; then
pablo_lib=""
fi
saved_CPPFLAGS="$CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
if test -n "$pablo_inc"; then
CPPFLAGS="$CPPFLAGS -I$pablo_inc"
fi
if test -n "$pablo_lib"; then
LDFLAGS="$LDFLAGS -L$pablo_lib"
fi
failed="no"
if test -f "$pablo_inc/PabloTrace.h"; then
:
else
failed="yes"
fi
if test -f "$pablo_lib/libPabloTraceExt.a"; then
:
else
failed="yes"
fi
if test "$failed" = "yes"; then
dnl Reset flags if failed
CPPFLAGS="$saved_CPPFLAGS"
LDFLAGS="$saved_LDFLAGS"
else
HAVE_PABLO="yes"
PABLO="pablo"
fi
if test "$HAVE_PABLO" = "yes"; then
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
;;
esac
dnl ----------------------------------------------------------------------
dnl Is SSL library present? It is needed by GLOBUS-GASS and Grid Storage
dnl driver. SSL must be tested before them.
dnl
AC_SUBST([SSL]) SSL=yes
AC_ARG_WITH([ssl],
[AC_HELP_STRING([--with-ssl=LIB],
[Use the SSL library [default=no]])],,
withval=no)
case "$withval" in
yes)
AC_CHECK_LIB([crypto], [main],, [unset SSL])
AC_CHECK_LIB([ssl], [SSL_get_version],, [unset SSL])
;;
no)
AC_MSG_CHECKING([for SSL])
AC_MSG_RESULT([suppressed])
unset SSL
;;
*)
saved_LDFLAGS="$LDFLAGS"
if test "X$with_ssl" != "X/usr/lib"; then
LDFLAGS="$LDFLAGS -L$with_ssl"
fi
AC_CHECK_LIB([crypto], [main],, [LDFLAGS="$saved_LDFLAGS"; unset SSL])
AC_CHECK_LIB([ssl], [SSL_get_version],, [LDFLAGS="$saved_LDFLAGS"; unset SSL])
;;
esac
dnl ----------------------------------------------------------------------
dnl Is GLOBUS-GASS(1.1.0 or 1.1.1) Library present? It is also needed by
dnl the Grid Storage driver.
dnl
AC_SUBST([GASS]) GASS="yes"
AC_SUBST([TESTGASS]) TESTGASS='$(srcdir)/testgass'
AC_ARG_WITH([gass],
[AC_HELP_STRING([--with-gass=DIR],
[Use the GASS library [default=no]])],,
withval=no)
case "$withval" in
yes)
AC_CHECK_HEADERS(globus_common.h,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_common,globus_module_activate,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_cache,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gaa,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gss,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gss_assist,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_io,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_transfer_assist,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS)
;;
no)
AC_MSG_CHECKING([for GASS])
AC_MSG_RESULT([suppressed])
unset GASS TESTGASS
;;
*)
case "$withval" in
*,*)
gass_inc="`echo $withval | cut -f1 -d,`"
gass_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
gass_inc="$withval/include"
gass_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$gass_inc" = "X/usr/include"; then
gass_inc=""
fi
if test "X$gass_lib" = "X/usr/lib"; then
gass_lib=""
fi
if test -n "$gass_inc"; then
saved_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I$gass_inc"
AC_CHECK_HEADERS([globus_common.h],,
CPPFLAGS="$saved_CPPFLAGS"
unset GASS TESTGASS)
else
AC_CHECK_HEADERS([globus_common.h])
fi
if test -n "$gass_lib"; then
saved_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -L$gass_lib"
AC_CHECK_LIB(globus_common,globus_module_activate,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_cache,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gaa,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gss,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gss_assist,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_io,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_transfer_assist,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS)
else
AC_CHECK_LIB(globus_common,globus_module_activate,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_cache,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gaa,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gss,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gss_assist,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_io,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_transfer_assist,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS)
AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS)
fi
;;
esac
if test -n "$GASS"; then
AC_DEFINE([HAVE_GASS], [1], [Define if the Globus GASS is defined])
fi
dnl ----------------------------------------------------------------------
dnl Are SRB Client and other system libraries(socket, elf) present?
dnl
AC_SUBST([SRB]) SRB="yes"
AC_SUBST([TESTSRB]) TESTSRB='$(srcdir)/testsrb'
AC_ARG_WITH([srb],
[AC_HELP_STRING([--with-srb=DIR],
[Use the SRB library [default=no]])],,
withval=no)
case "$withval" in
yes)
AC_CHECK_HEADERS([srbClient.h],, [unset SRB TESTSRB])
AC_CHECK_LIB([elf], [main],, [unset SRB TESTSRB])
AC_CHECK_LIB([socket], [main],, [unset SRB TESTSRB])
AC_CHECK_LIB([SrbClient], [clConnect],, [unset SRB TESTSRB])
;;
no)
AC_MSG_CHECKING([for SRB])
AC_MSG_RESULT([suppressed])
unset SRB TESTSRB
;;
*)
case "$withval" in
*,*)
srb_inc="`echo $withval | cut -f1 -d,`"
srb_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
srb_inc="$withval/include"
srb_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$srb_inc" = "X/usr/include"; then
srb_inc=""
fi
if test "X$srb_lib" = "X/usr/lib"; then
srb_lib=""
fi
if test -n "$srb_inc"; then
saved_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I$srb_inc"
AC_CHECK_HEADERS(srbClient.h,,
CPPFLAGS="$saved_CPPFLAGS"
unset SRB TESTSRB)
else
AC_CHECK_HEADERS(srbClient.h)
fi
if test -n "$srb_lib"; then
saved_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -L$srb_lib"
AC_CHECK_LIB(elf,main,,unset SRB TESTSRB)
AC_CHECK_LIB(socket,main,,unset SRB TESTSRB)
AC_CHECK_LIB(SrbClient,clConnect,,unset SRB TESTSRB)
else
AC_CHECK_LIB(elf,main,,unset SRB TESTSRB)
AC_CHECK_LIB(socket,main,,unset SRB TESTSRB)
AC_CHECK_LIB(SrbClient,clConnect,,unset SRB TESTSRB)
fi
;;
esac
if test -n "$SRB"; then
AC_DEFINE([HAVE_SRB], [1], [Define if the SRB is defined])
fi
dnl ----------------------------------------------------------------------
dnl Is LLNL's PDB present? If so then we'll compile the PDB-to-HDF5
dnl translator.
dnl
AC_SUBST([PDB2HDF])
AC_CHECK_LIB([pdb], [PD_open])
AC_CHECK_LIB([silo], [lite_PD_open])
AC_CHECK_HEADERS([pdb.h], [PDB2HDF=pdb2hdf])
dnl Checkpoint the cache
AC_CACHE_SAVE
dnl ----------------------------------------------------------------------
dnl Is the Pthreads library present? It has a header file `pthread.h' and
dnl a library `-lpthread' and their locations might be specified with the
dnl `--with-pthread' command-line switch. The value is an include path
dnl and/or a library path. If the library path is specified then it must
dnl be preceded by a comma.
dnl
AC_SUBST([PTHREAD]) PTHREAD=yes
AC_ARG_WITH([pthread],
[AC_HELP_STRING([--with-pthread=DIR],
[Use the Pthreads library [default=no]])],,
withval=no)
case "$withval" in
yes)
AC_CHECK_HEADERS([pthread.h])
AC_CHECK_LIB([pthread], [pthread_create],, [unset PTHREAD])
;;
no)
AC_MSG_CHECKING([for pthread])
AC_MSG_RESULT([suppressed])
unset PTHREAD
;;
*)
case "$withval" in
*,*)
pthread_inc="`echo $withval | cut -f1 -d,`"
pthread_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
pthread_inc="$withval/include"
pthread_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$pthread_inc" = "X/usr/include"; then
pthread_inc=""
fi
if test "X$pthread_lib" = "X/usr/lib"; then
pthread_lib=""
fi
if test -n "$pthread_inc"; then
saved_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I$pthread_inc"
AC_CHECK_HEADERS([pthread.h],, [CPPFLAGS="$saved_CPPFLAGS"; unset PTHREAD])
else
AC_CHECK_HEADERS([pthread.h],, [unset PTHREAD])
fi
if test -n "$pthread_lib"; then
saved_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -L$pthread_lib"
AC_CHECK_LIB([pthread], [pthread_create],,
[LDFLAGS="$saved_LDFLAGS"; unset PTHREAD])
else
AC_CHECK_LIB([pthread], [pthread_create],, [unset PTHREAD])
fi
;;
esac
dnl ----------------------------------------------------------------------
dnl Enable thread-safe version of library. It requires Pthreads support.
dnl
AC_MSG_CHECKING([for thread safe support])
AC_ARG_ENABLE([threadsafe],
[AC_HELP_STRING([--enable-threadsafe],
[Enable thread safe capability])],
THREADSAFE=$enableval)
case "X-$THREADSAFE" in
X-|X-no)
AC_MSG_RESULT([no])
;;
X-yes)
dnl Check that we can link a simple Pthread program.
AC_TRY_LINK(, [pthread_create()],
[AC_MSG_RESULT([yes]); THREADSAFE=yes],
[AC_MSG_ERROR([needed pthread library not available])])
;;
*)
AC_MSG_RESULT([error])
AC_MSG_ERROR([\'$enableval\' is not a valid threadsafe type])
;;
esac
if test "X$THREADSAFE" = "Xyes"; then
AC_DEFINE([HAVE_THREADSAFE], [1], [Define if we have thread safe support])
fi
dnl ----------------------------------------------------------------------
dnl Check if they would like the HDF5 v1.6 compatibility functions
dnl compiled in
dnl
AC_MSG_CHECKING([whether HDF5 v1.6 compatibility functions enabled])
AC_ARG_ENABLE([hdf5v1_6],
[AC_HELP_STRING([--enable-hdf5v1_6],
[Compile the HDF5 v1.6 compatibility
interface [default=no]])],
[HDF5_V1_6_COMPAT=$enableval])
if test "$HDF5_V1_6_COMPAT" = "yes"; then
AC_MSG_RESULT([yes])
AC_DEFINE([WANT_H5_V1_6_COMPAT], [1],
[Define if the HDF5 v1.6 compatibility functions are to be compiled in])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Should the Stream Virtual File Driver be compiled in ?
dnl
AC_MSG_CHECKING([for Stream Virtual File Driver support])
AC_ARG_ENABLE([stream-vfd],
[AC_HELP_STRING([--enable-stream-vfd],
[Build the Stream Virtual File Driver
[default=yes]])],
[STREAM_VFD=$enableval],
[STREAM_VFD=yes])
if test "$STREAM_VFD" = "yes"; then
AC_MSG_RESULT([yes])
AC_CHECK_HEADERS([netinet/tcp.h sys/filio.h])
AC_DEFINE([HAVE_STREAM], [1],
[Define if the stream virtual file driver should be compiled])
dnl Check if 'socklen_t' available
AC_MSG_CHECKING([if socklen_t is defined])
AC_TRY_COMPILE([
#include <stdio.h>
#include <stdlib.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
],
[socklen_t foo; return 0;],
AC_DEFINE([HAVE_SOCKLEN_T], 1, [Define if \`socklen_t' is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no])
)
else
AC_MSG_RESULT([not configured])
fi
dnl ----------------------------------------------------------------------
dnl How does one figure out the local time zone? Anyone know of a
dnl Posix way to do this?
dnl
dnl First check if `struct tm' has a `tm_gmtoff' member.
AC_MSG_CHECKING([for tm_gmtoff in struct tm])
AC_TRY_COMPILE([
#include <sys/time.h>
#include <time.h>], [struct tm tm; tm.tm_gmtoff=0;],
AC_DEFINE([HAVE_TM_GMTOFF], [1],
[Define if \`tm_gmtoff' is a member of \`struct tm'])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl check if `struct tm' has a `__tm_gmtoff' member.
AC_MSG_CHECKING([for __tm_gmtoff in struct tm])
AC_TRY_COMPILE([
#include <sys/time.h>
#include <time.h>], [struct tm tm; tm.__tm_gmtoff=0;],
AC_DEFINE([HAVE___TM_GMTOFF], [1],
[Define if \`__tm_gmtoff' is a member of \`struct tm'])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl Check whether the global variable `timezone' is defined.
AC_MSG_CHECKING([for global timezone variable])
AC_TRY_LINK([
#include <sys/time.h>
#include <time.h>], [timezone=0;],
AC_DEFINE([HAVE_TIMEZONE], [1],
[Define if \`timezone' is a global variable])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl Check whether `struct timezone' is defined.
AC_STRUCT_TIMEZONE
AC_MSG_CHECKING([for struct timezone])
AC_TRY_COMPILE([
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>], [struct timezone tz; tz.tz_minuteswest=0;],
AC_DEFINE([HAVE_STRUCT_TIMEZONE], [1],
[Define if \`struct timezone' is defined])
have_struct_tz="yes"
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl If gettimeofday() is going to be used, make sure it uses the timezone struct
if test "$have_gettime" = "yes" -a "$have_struct_tz" = "yes"; then
AC_MSG_CHECKING(whether gettimeofday() gives timezone)
AC_CACHE_VAL([hdf5_cv_gettimeofday_tz],
[AC_TRY_RUN([
#include <time.h>
#include <sys/time.h>
int main(void)
{
struct timeval tv;
struct timezone tz;
tz.tz_minuteswest = 7777; /* Initialize to an unreasonable number */
tz.tz_dsttime = 7;
gettimeofday(&tv, &tz);
/* Check whether the function returned any value at all */
if(tz.tz_minuteswest == 7777 && tz.tz_dsttime == 7)
exit(1);
else exit (0);
}], [hdf5_cv_gettimeofday_tz=yes], [hdf5_cv_gettimeofday_tz=no],)])
if test ${hdf5_cv_gettimeofday_tz} = "yes"; then
AC_MSG_RESULT([yes])
AC_DEFINE([GETTIMEOFDAY_GIVES_TZ], [1],
[Define if gettimeofday() populates the tz pointer passed in])
else
AC_MSG_RESULT([no])
fi
fi
dnl ----------------------------------------------------------------------
dnl Does the struct stat have the st_blocks field? This field is not Posix.
dnl
AC_MSG_CHECKING([for st_blocks in struct stat])
AC_TRY_COMPILE([
#include <sys/stat.h>],[struct stat sb; sb.st_blocks=0;],
AC_DEFINE([HAVE_STAT_ST_BLOCKS], [1],
[Define if \`struct stat' has the \`st_blocks' field])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl ----------------------------------------------------------------------
dnl How do we figure out the width of a tty in characters?
dnl
AC_CHECK_FUNCS(_getvideoconfig gettextinfo GetConsoleScreenBufferInfo)
AC_CHECK_FUNCS(_scrsize ioctl)
AC_MSG_CHECKING([for struct videoconfig])
AC_TRY_COMPILE(,[struct videoconfig w; w.numtextcols=0;],
AC_DEFINE([HAVE_STRUCT_VIDEOCONFIG], [1],
[Define if \`struct videoconfig' is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
AC_MSG_CHECKING([for struct text_info])
AC_TRY_COMPILE(, [struct text_info w; w.screenwidth=0;],
AC_DEFINE([HAVE_STRUCT_TEXT_INFO], [1],
[Define if \`struct text_info' is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
AC_MSG_CHECKING([for TIOCGWINSZ])
AC_TRY_COMPILE([#include <sys/ioctl.h>],[int w=TIOCGWINSZ;],
AC_DEFINE([HAVE_TIOCGWINSZ], [1],
[Define if the ioctl TIOGWINSZ is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
AC_MSG_CHECKING([for TIOCGETD])
AC_TRY_COMPILE([#include <sys/ioctl.h>],[int w=TIOCGETD;],
AC_DEFINE([HAVE_TIOCGETD], [1],
[Define if the ioctl TIOCGETD is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl ----------------------------------------------------------------------
dnl Check for functions.
dnl
AC_CHECK_FUNCS(fork frexpf frexpl gethostname getpwuid getrusage)
AC_CHECK_FUNCS(BSDgettimeofday longjmp setsysinfo sigaction)
AC_CHECK_FUNCS(signal snprintf vsnprintf strdup system waitpid)
dnl ----------------------------------------------------------------------
dnl Check compiler characteristics
dnl
AC_C_CONST
AC_C_INLINE
AC_MSG_CHECKING([for __attribute__ extension])
AC_TRY_COMPILE(,[int __attribute__((unused)) x],
AC_DEFINE([HAVE_ATTRIBUTE], [1],
[Define if the __attribute__(()) extension is present])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
AC_MSG_CHECKING([for __FUNCTION__ extension])
AC_TRY_COMPILE(,[(void)__FUNCTION__],
AC_DEFINE([HAVE_FUNCTION], [1],
[Define if the compiler understand the __FUNCTION__ keyword])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))
dnl ----------------------------------------------------------------------
dnl Try to figure out how to print `long long'. Some machines use `%lld'
dnl and others use `%qd'. There may be more! The final `l' is a
dnl default in case none of the others work.
dnl Need to patch up LD_LIBRARY_PATH so that the execution can find all
dnl the dynamic library. The correct way to do it should be updating
dnl LD_LIBRARY_PATH along with LDFLAGS or do it with the AC_TRY_RUN macro.
dnl
AC_MSG_CHECKING([how to print long long])
AC_CACHE_VAL([hdf5_cv_printf_ll],
LD_LIBRARY_PATH="$LD_LIBRARY_PATH`echo $LDFLAGS | sed -e 's/-L/:/g' -e 's/ //g'`"
export LD_LIBRARY_PATH
for hdf5_cv_printf_ll in l L ll q unknown; do
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main(void)
{
char *s = malloc(128);
long long x = (long long)1048576 * (long long)1048576;
sprintf(s,"%${hdf5_cv_printf_ll}d",x);
exit(strcmp(s,"1099511627776"));
}
], break,,continue)
done)dnl
AC_MSG_RESULT([%${hdf5_cv_printf_ll}d and %${hdf5_cv_printf_ll}u])
AC_DEFINE_UNQUOTED([PRINTF_LL_WIDTH], ["$hdf5_cv_printf_ll"],
[Width for printf() for type \`long long' or \`__int64', use \`ll'])
dnl ----------------------------------------------------------------------
dnl Check if pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM)
dnl is supported on this system
dnl
AC_MSG_CHECKING([Threads support system scope])
AC_CACHE_VAL([hdf5_cv_system_scope_threads],
[AC_TRY_RUN([
#if STDC_HEADERS
#include <stdlib.h>
#include <pthread.h>
#endif
int main(void)
{
pthread_attr_t attribute;
int ret;
pthread_attr_init(&attribute);
ret=pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM);
exit(ret==0 ? 0 : 1);
}
], [hdf5_cv_system_scope_threads=yes], [hdf5_cv_system_scope_threads=no],)])
if test ${hdf5_cv_system_scope_threads} = "yes"; then
AC_DEFINE([SYSTEM_SCOPE_THREADS], [1],
[Define if your system supports pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM) call.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Checking to see if GPFS is available on this filesystem
dnl
AC_ARG_ENABLE([gpfs],
[AC_HELP_STRING([--enable-gpfs],
[Enable GPFS hints for the MPI/POSIX file
driver. [default=no]])],,
[enableval=no])
case "X-$enableval" in
X-yes)
AC_CHECK_HEADERS([gpfs.h],
AC_MSG_CHECKING([for GPFS support])
AC_TRY_COMPILE([#include <gpfs.h>],
[int fd = 0; gpfs_fcntl(fd, (void *)0);],
AC_DEFINE(HAVE_GPFS, 1,
[Define if we have GPFS support])
AC_MSG_RESULT([yes])
LIBS="$LIBS -lgpfs"
GPFS="yes",
AC_MSG_RESULT([no])
GPFS="no"))
;;
X-no|*)
AC_MSG_CHECKING([for gpfs])
AC_MSG_RESULT([suppressed])
;;
esac
dnl ----------------------------------------------------------------------
dnl Turn on debugging by setting compiler flags
dnl
AC_MSG_CHECKING(for debug flags)
AC_ARG_ENABLE([debug],
[AC_HELP_STRING([--enable-debug=all],
[Turn on debugging in all packages. One may
also specify a comma-separated list of
package names without the leading H5 or
the word no. The default is most
packages.])],
[DEBUG_PKG=$enableval])
AC_SUBST([DEBUG_PKG])
all_packages="ac,b,d,e,f,g,hg,hl,i,mf,mm,o,p,s,t,v,z"
case "X-$DEBUG_PKG" in
X-|X-yes)
DEBUG_PKG="d,e,f,g,hg,i,mm,o,p,s,t,v,z"
CPPFLAGS="$CPPFLAGS -UNDEBUG"
AC_MSG_RESULT([default ($DEBUG_PKG)])
;;
X-all)
DEBUG_PKG=$all_packages
CPPFLAGS="$CPPFLAGS -UNDEBUG"
AC_MSG_RESULT([all ($DEBUG_PKG)])
;;
X-no|X-none)
AC_MSG_RESULT([none])
DEBUG_PKG=
CPPFLAGS="$CPPFLAGS -DNDEBUG"
;;
*)
AC_MSG_RESULT([$DEBUG_PKG])
;;
esac
if test -n "$DEBUG_PKG"; then
for pkg in `echo $DEBUG_PKG | tr 'a-z,' 'A-Z '`; do
CPPFLAGS="$CPPFLAGS -DH5${pkg}_DEBUG"
done
fi
dnl ----------------------------------------------------------------------
dnl Check if they would like the function stack support compiled in
dnl
AC_MSG_CHECKING([whether function stack tracking is enabled])
AC_ARG_ENABLE([funcstack],
[AC_HELP_STRING([--enable-funcstack],
[Enable the function stack tracing.
Default=no if debug is disabled.])],
[FUNCSTACK=$enableval])
dnl Default to no if debug is disabled
if test "X-$FUNCSTACK" = X- ; then
if test -z "$DEBUG_PKG" ; then
FUNCSTACK=no
else
FUNCSTACK=yes
fi
fi
case "X-$FUNCSTACK" in
X-|X-yes)
FUNCSTACK="yes"
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_FUNCSTACK], [1],
[Define if the function stack tracing code is to be compiled in])
;;
*)
AC_MSG_RESULT([no])
;;
esac
dnl ----------------------------------------------------------------------
dnl Enable tracing of the API
dnl This must come after the enable-debug since it depends on debug.
dnl
AC_SUBST([TRACE_API])
AC_MSG_CHECKING([for API tracing]);
AC_ARG_ENABLE([trace],
[AC_HELP_STRING([--enable-trace],
[Enable API tracing capability. Default=no
if debug is disabled.])],
TRACE=$enableval)
dnl Default to no if debug is disabled
if test "X-$TRACE" = X- ; then
if test -z "$DEBUG_PKG" ; then
TRACE=no
else
TRACE=yes
fi
fi
case "X-$TRACE" in
X-yes)
AC_MSG_RESULT([yes])
TRACE_API=yes
CPPFLAGS="$CPPFLAGS -DH5_DEBUG_API"
;;
X-no|*)
AC_MSG_RESULT([no])
TRACE_API=no
CPPFLAGS="$CPPFLAGS -UH5_DEBUG_API"
;;
esac
dnl ----------------------------------------------------------------------
dnl Enable instrumenting of the library's internal operations
dnl This must come after the enable-debug since it depends on debug.
dnl
AC_SUBST([INSTRUMENT_LIBRARY])
AC_MSG_CHECKING([for instrumented library]);
AC_ARG_ENABLE([instrument],
[AC_HELP_STRING([--enable-instrument],
[Enable library instrumentation of optimization
tracing. Default=no if debug is disabled.])],
INSTRUMENT=$enableval)
dnl Default to no if debug is disabled
if test "X-$INSTRUMENT" = X- ; then
if test -z "$DEBUG_PKG" ; then
INSTRUMENT=no
else
INSTRUMENT=yes
fi
fi
case "X-$INSTRUMENT" in
X-yes)
AC_MSG_RESULT([yes])
INSTRUMENT_LIBRARY=yes
AC_DEFINE([HAVE_INSTRUMENTED_LIBRARY], [1],
[Define if library will contain instrumentation to detect correct optimization operation])
;;
X-no|*)
AC_MSG_RESULT([no])
INSTRUMENT_LIBRARY=no
;;
esac
dnl Checkpoint the cache
AC_CACHE_SAVE
dnl ----------------------------------------------------------------------
dnl The following variables are used to distinguish between building a
dnl serial and parallel library.
dnl
dnl HAVE_PARALLEL -- defined in H5config.h if we are building
dnl a parallel library even if configure wasn't
dnl able to find some header file or library that
dnl might be required. This is defined if the
dnl compiler looks like a parallel compiler (e.g.,
dnl mpicc or mpcc) or if the user explicitly states
dnl that a parallel library is being built by supplying
dnl the `--enable-parallel' configure switch.
dnl
dnl PARALLEL -- This variable is set to a non-null value if
dnl configure thinks we're compiling a parallel
dnl version of the library.
dnl
dnl RUNSERIAL -- This is a command which will be prepended to
dnl the executable name to run the executable using
dnl a single process. For serial versions of the
dnl library this will normally be empty. For parallel
dnl versions it might be something like `mpirun -np 1'.
dnl The value of this variable is substituted in *.in
dnl files.
dnl
dnl RUNPARALLEL -- This is a command which will be prepended to
dnl the executable name to run the executable on
dnl multiple processors. For the serial library the
dnl value will normally be the empty string. For
dnl parallel library it should be something like
dnl `mpi -np $$NPROCS' where NPROCS will eventually
dnl contain the number of processors on which to run
dnl the executable (the double dollarsigns are to
dnl protect the expansion until make executes the
dnl command). The value of this variable is
dnl substituted in *.in files.
dnl
AC_SUBST([PARALLEL])
AC_SUBST([RUNSERIAL])
AC_SUBST([RUNPARALLEL])
AC_SUBST([TESTPARALLEL])
dnl ----------------------------------------------------------------------
dnl If the compiler is obviously a parallel compiler then we're building
dnl a parallel version of hdf5 and should define HAVE_PARALLEL. Furthermore,
dnl the name of the compiler might tell us how to run the resulting
dnl executable. For `mpicc' the executable should be run with `mpirun' from
dnl the same directory as mpicc if it exists.
dnl
case "$CC_BASENAME" in
mpicc)
dnl The mpich compiler. Use mpirun from the same directory if it
dnl exists.
PARALLEL=mpicc
AC_MSG_CHECKING([for mpirun])
dnl Find the path where mpicc is located.
cmd="`echo $CC | cut -f1 -d' '`"
if (echo $cmd | grep / >/dev/null); then
path="`echo $cmd | sed 's/\(.*\)\/.*$/\1/'`"
else
for path in `echo $PATH | tr : ' '`; do
if test -x $path/$cmd; then
break
fi
done
fi
dnl Is there an mpirun at that path?
if test -x $path/mpirun; then
AC_MSG_RESULT([$path/mpirun])
RUNSERIAL="${RUNSERIAL:-none}"
if test -z "$RUNPARALLEL"; then
RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=3}"
fi
else
AC_MSG_RESULT([none])
fi
;;
hcc)
dnl The LAM compiler. Use mpirun_lam or mpirun from the same directory
dnl if it exists.
PARALLEL=hcc
AC_MSG_CHECKING([for mpirun_lam or mpirun])
dnl Find the path where hcc is located
cmd="`echo $CC | cut -f1 -d' '`"
if (echo $cmd | grep / >/dev/null); then
path="`echo $cmd | sed 's/\(.*\)\/.*$/\1/'`"
else
for path in `echo $PATH | tr : ' '`; do
if test -x $path/$cmd; then
break
fi
done
fi
dnl Is there an mpirun_lam or mpirun at that path?
if test -x $path/mpirun_lam -o -x $path/mpirun; then
if test -x $path/mpirun_lam; then
cmd=mpirun_lam
else
cmd=mpirun
fi
AC_MSG_RESULT([$path/$cmd])
RUNSERIAL="${RUNSERIAL:-none}"
if test -z "$RUNPARALLEL"; then
RUNPARALLEL="$path/$cmd -np \$\${NPROCS:=3}"
fi
else
AC_MSG_RESULT([none])
fi
;;
mpcc|mpcc_r)
dnl The IBM compiler
PARALLEL="$CC_BASENAME"
;;
*)
dnl Probably not a parallel compiler, but if `--enable-parallel'
dnl is defined below then we're still building a parallel hdf5.
;;
esac
dnl ----------------------------------------------------------------------
dnl If the Fortran compiler is obviously a parallel compiler then we're
dnl building a parallel version of hdf5 and should define HAVE_PARALLEL.
dnl Furthermore, the name of the compiler might tell us how to run the
dnl resulting executable. For `mpif90' the executable should be run with
dnl `mpirun' from the same directory as mpif90 if it exists.
dnl
if test "X$HDF_FORTRAN" = "Xyes"; then
dnl Change to the Fortran 90 language
AC_LANG_FORTRAN9X
case "$F9X" in
*mpif90*)
dnl The Fortran mpich compiler. Use mpirun from the same directory
dnl if it exists.
PARALLEL=mpif90
AC_MSG_CHECKING([for mpirun])
dnl Find the path where mpif90 is located.
cmd=`echo $F9X |cut -f1 -d' '`
if (echo $cmd |grep / >/dev/null); then
path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`"
else
for path in `echo $PATH |tr : ' '`; do
if test -x $path/$cmd; then
break;
fi
done
fi
dnl Is there an mpirun at that path?
if test -x $path/mpirun; then
AC_MSG_RESULT([$path/mpirun])
RUNSERIAL="${RUNSERIAL:-none}"
if test -z "$RUNPARALLEL"; then
RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}"
fi
else
AC_MSG_RESULT([none])
fi
;;
*mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*)
dnl The IBM compiler
PARALLEL="$F9X"
;;
*)
dnl Probably not a parallel compiler, but if `--enable-parallel'
dnl is defined below then we're still building a parallel hdf5.
;;
esac
dnl Change to the C language
AC_LANG_C
fi
dnl ----------------------------------------------------------------------
dnl What header files and libraries do we have to look for for parallel
dnl support? For the most part, search paths are already specified with
dnl CPPFLAGS and LDFLAGS or are known to the compiler. If the user says
dnl `--disable-parallel' but specifies a known parallel compiler (like mpicc
dnl or mpcc) then parallel support is enabled but configure doesn't search
dnl for any parallel header files or libraries.
dnl
AC_ARG_ENABLE([parallel],
[AC_HELP_STRING([--enable-parallel],
[Search for MPI-IO and MPI support files])])
AC_MSG_CHECKING([for parallel support files])
case "X-$enable_parallel" in
X-|X-no|X-none)
dnl Either we are not compiling for parallel or the header and
dnl library files and locations are known to the compiler (this is
dnl the case for a correct installation of mpicc for instance).
AC_MSG_RESULT([skipped])
;;
X-yes)
dnl We want to compile a parallel library with a compiler that
dnl may already know how to link with MPI and MPI-IO.
AC_MSG_RESULT([provided by compiler])
PARALLEL=yes
dnl Try link a simple MPI program. If fail, try again with -lmpi.
AC_TRY_LINK(, MPI_Init(),, AC_CHECK_LIB(mpi, MPI_Init,, PARALLEL=no))
dnl Then try link a simple MPI-IO program. If fail, try again with
dnl -lmpio.
if test "X$PARALLEL" = "Xyes"; then
AC_TRY_LINK(, [MPI_File_open()],,
[AC_CHECK_LIB([mpio], [MPI_File_open],, [PARALLEL=no])])
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
dnl Change to the Fortran 90 language
AC_LANG_FORTRAN9X
dnl Try link a simple MPI program. If fail, try again with -lmpi.
AC_TRY_FLINK(mpif.h, [
integer:: ierr
call mpi_file_open( ierr )],,
AC_CHECK_FLIB(mpi, [
include 'mpif.h'
integer:: ierr
call mpi_file_open( ierr )],, PARALLEL=no))
dnl Then try link a simple MPI-IO program. If fail, try again with
dnl -lmpio.
if test "X$PARALLEL" = "Xyes"; then
AC_TRY_FLINK(mpif.h, [
integer:: ierr
call mpi_file_open( ierr )],,
AC_CHECK_FLIB(mpio, [
include 'mpif.h'
integer:: ierr
call mpi_file_open( ierr )],, PARALLEL=no))
fi
dnl Change to the C language
AC_LANG_C
fi
dnl Set RUNPARALLEL to mpirun if not set yet.
if test "X$PARALLEL" = "Xyes" -a -z "$RUNPARALLEL"; then
RUNPARALLEL="mpirun -np \$\${NPROCS:=3}"
fi
;;
*)
AC_MSG_RESULT([error])
AC_MSG_ERROR([\'$enable_parallel\' is not a valid parallel search type])
;;
esac
dnl ----------------------------------------------------------------------
dnl Print some other parallel information and do some sanity checks.
dnl
AC_SUBST([ADD_PARALLEL_FILES]) ADD_PARALLEL_FILES="no"
if test -n "$PARALLEL"; then
dnl The 'testpar' directory should participate in the build
TESTPARALLEL=testpar
dnl We are building a parallel library
AC_DEFINE([HAVE_PARALLEL], [1], [Define if we have parallel support])
dnl Display what we found about running programs
AC_MSG_CHECKING([prefix for running on one processor])
AC_MSG_RESULT([$RUNSERIAL])
AC_MSG_CHECKING([prefix for running in parallel])
AC_MSG_RESULT([$RUNPARALLEL])
dnl Check that we can link a simple MPI and MPI-IO application
AC_MSG_CHECKING([whether a simple MPI-IO program can be linked])
AC_TRY_LINK(, [MPI_Init(); MPI_File_open();],
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no])
AC_MSG_ERROR([unable to link a simple MPI-IO application]))
dnl There *must* be some way to run in parallel even if it's just the
dnl word `none'.
if test -z "$RUNPARALLEL"; then
AC_MSG_ERROR([no way to run a parallel program])
fi
dnl If RUNSERIAL or RUNPARALLEL is the word `none' then replace it with
dnl the empty string.
if test "X$RUNSERIAL" = "Xnone"; then
RUNSERIAL=""
fi
if test "X$RUNPARALLEL" = "Xnone"; then
RUNPARALLEL=""
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
ADD_PARALLEL_FILES="yes"
AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions])
AC_TRY_LINK([#include <mpi.h>],
[MPI_Comm c_comm; MPI_Comm_c2f(c_comm)],
AC_DEFINE([HAVE_MPI_MULTI_LANG_Comm], [1],
[Define if \`MPI_Comm_c2f' and \`MPI_Comm_f2c' exists])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no])
)
AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions])
AC_TRY_LINK([#include <mpi.h>],
[MPI_Info c_info; MPI_Info_c2f(c_info)],
AC_DEFINE([HAVE_MPI_MULTI_LANG_Info], [1],
[Define if \`MPI_Info_c2f' and \`MPI_Info_f2c' exists])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no])
)
fi
dnl --------------------------------------------------------------------
dnl Do we want MPE instrumentation feature on?
dnl
dnl This must be done after enable-parallel is checked since it depends
dnl on a mpich compiler.
dnl
AC_SUBST([MPE]) MPE=yes
AC_ARG_WITH([mpe],
[AC_HELP_STRING([--with-mpe=DIR],
[Use MPE instrumentation [default=no]])],,
[withval=no])
case "X-$withval" in
X-|X-no|X-none)
AC_MSG_CHECKING([for MPE])
AC_MSG_RESULT([suppressed])
unset MPE
;;
X-yes)
AC_CHECK_HEADERS([mpe.h],, [unset MPE])
AC_CHECK_LIB([mpe], [MPE_Init_log],, [unset MPE])
AC_CHECK_LIB([lmpe], [CLOG_Init],, [unset MPE])
;;
*)
case "$withval" in
*,*)
mpe_inc="`echo $withval | cut -f1 -d,`"
mpe_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
mpe_inc="$withval/include"
mpe_lib="$withval/lib"
fi
;;
esac
dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
dnl can mess some compilers up.
if test "X$mpe_inc" = "X/usr/include"; then
mpe_inc=""
fi
if test "X$mpe_lib" = "X/usr/lib"; then
mpe_lib=""
fi
if test -n "$mpe_inc"; then
saved_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I$mpe_inc"
AC_CHECK_HEADERS([mpe.h],, [CPPFLAGS="$saved_CPPFLAGS"; unset MPE])
else
AC_CHECK_HEADERS([mpe.h],, [unset MPE])
fi
if test -n "$mpe_lib"; then
saved_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -L$mpe_lib"
AC_CHECK_LIB([mpe], [MPE_Init_log],,
[LDFLAGS="$saved_LDFLAGS"; unset MPE])
AC_CHECK_LIB([lmpe], [CLOG_Init],,
[LDFLAGS="$saved_LDFLAGS"; unset MPE])
else
AC_CHECK_LIB([mpe], [MPE_Init_log],, [unset MPE])
AC_CHECK_LIB([lmpe], [CLOG_Init],, [unset MPE])
fi
;;
esac
if test "X-$MPE" = "X-yes"; then
AC_DEFINE([HAVE_MPE], [1], [Define if we have MPE support])
fi
dnl ----------------------------------------------------------------------
dnl Check if they would like the "Flexible parallel" interface enabled
dnl
AC_MSG_CHECKING([if Flexible Parallel HDF5 interface enabled])
AC_ARG_ENABLE([fphdf5],
[AC_HELP_STRING([--enable-fphdf5],
[Enable the Flexible Parallel HDF5
interface [default=no]])],
[FPHDF5=$enableval],
[FPHDF5="no"])
if test "X$FPHDF5" = "Xyes"; then
AC_DEFINE(HAVE_FPHDF5, 1,
[Define if we want flexible parallel HDF5 support])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the MPI_File_set_size() function
dnl works with files over 2GB, unless it's already set in the cache.
dnl (This flag should be set for all machines, except for ASCI Red, where
dnl the cache value is set in it's config file)
dnl
AC_MSG_CHECKING([if MPI_File_set_size works for files over 2GB])
AC_CACHE_VAL([hdf5_cv_mpi_file_set_size_big], [hdf5_cv_mpi_file_set_size_big=yes])
if test ${hdf5_cv_mpi_file_set_size_big} = "yes"; then
AC_DEFINE([MPI_FILE_SET_SIZE_BIG], [1],
[Define if your system's \`MPI_File_set_size' function works for files over 2GB.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
fi
dnl ----------------------------------------------------------------------
dnl Turn on internal I/O filters by setting macros in header files
dnl Internal I/O filters are contained entirely within the library and do
dnl not depend on external headers or libraries. The shuffle filter is
dnl an example of an internal filter, while the gzip filter is an example of
dnl an external filter. Each external filter is controlled with an
dnl "--with-foo=" configure flag.
dnl
AC_SUBST([FILTERS])
AC_SUBST(USE_FILTER_SHUFFLE) USE_FILTER_SHUFFLE="no"
AC_SUBST(USE_FILTER_FLETCHER32) USE_FILTER_FLETCHER32="no"
AC_MSG_CHECKING([for I/O filters])
AC_ARG_ENABLE([filters],
[AC_HELP_STRING([--enable-filters=all],
[Turn on all internal I/O filters. One may
also specify a comma-separated list of filters
or the word no. The default is all internal
I/O filters.])],
[FILTERS=$enableval])
dnl Eventually: all_filters="shuffle,foo,bar,baz"
all_filters="shuffle,fletcher32"
case "X-$FILTERS" in
X-|X-all)
FILTERS=$all_filters
AC_MSG_RESULT([all ($FILTERS)])
;;
X-no|X-none)
AC_MSG_RESULT([none])
FILTERS="none"
;;
*)
AC_MSG_RESULT([$FILTERS])
;;
esac
if test -n "$FILTERS"; then
for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do
dnl ------------------------------------------------------------------
dnl Have to use separate 'if' construct for each filter, so that
dnl autoheader can detect the AC_DEFINE for each one...
dnl
if test $filter = "SHUFFLE"; then
AC_DEFINE([HAVE_FILTER_SHUFFLE], [1],
[Define if support for shuffle filter is enabled])
USE_FILTER_SHUFFLE="yes"
fi
if test $filter = "FLETCHER32"; then
AC_DEFINE([HAVE_FILTER_FLETCHER32], [1],
[Define if support for Fletcher32 checksum is enabled])
USE_FILTER_FLETCHER32="yes"
fi
done
fi
dnl ----------------------------------------------------------------------
dnl This is defined only when we're using CodeWarrior, since it has a
dnl broken "open()" call.
dnl
if test 1 = 2; then
AC_DEFINE([NO_SHARED_WRITING], [1],
[Define if shared writing must be disabled (CodeWarrior only)])
fi
dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can handle converting
dnl denormalized floating-point values.
dnl (This flag should be set for all machines, except for the Crays, where
dnl the cache value is set in it's config file)
dnl
AC_MSG_CHECKING([if converting denormalized floating-point values is possible])
AC_CACHE_VAL([hdf5_cv_convert_denormal_float], [hdf5_cv_convert_denormal_float=yes])
if test ${hdf5_cv_convert_denormal_float} = "yes"; then
AC_DEFINE([CONVERT_DENORMAL_FLOAT], [1],
[Define if your system can handle converting denormalized floating-point values.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can accurately convert
dnl 'unsigned (long) long' values to 'float' and 'double' values.
dnl (This flag should be set for all machines, except for the SGIs, where
dnl the cache value is set in the config/irix6.x config file) and Solaris
dnl 64-bit machines, where the short program below tests if round-up is
dnl correctly handled.
dnl
AC_MSG_CHECKING([if accurately converting unsigned long long to floating-point values works])
if test ${host_os_novers} = "solaris2.x"; then
AC_CACHE_VAL([hdf5_cv_sw_ulong_to_fp_bottom_bit_works],
[AC_TRY_RUN([
int main(void)
{
unsigned long l1;
unsigned long l2;
unsigned long l3;
unsigned long l4;
unsigned long long ld1;
unsigned long long ld2;
unsigned long long ld3;
unsigned long long ld4;
double d1, d2, d3, d4;
unsigned char s[8];
int ret = 0;
if(sizeof(unsigned long)==8) {
l1 = 0xf000000000000b00UL; /*Round-down case*/
l2 = 0xf000000000000401UL; /*Round-up case*/
l3 = 0xf000000000000400UL; /*Round-down case*/
l4 = 0xf000000000000c00UL; /*Round-up case*/
d1 = (double)l1;
d2 = (double)l2;
d3 = (double)l3;
d4 = (double)l4;
} else if(sizeof(unsigned long long)==8) {
ld1 = 0xf000000000000b00ULL; /*Round-down case*/
ld2 = 0xf000000000000401ULL; /*Round-up case*/
ld3 = 0xf000000000000400ULL; /*Round-down case*/
ld4 = 0xf000000000000c00ULL; /*Round-up case*/
d1 = (double)ld1;
d2 = (double)ld2;
d3 = (double)ld3;
d4 = (double)ld4;
} else {
ret = 1;
goto done;
}
memcpy(s, &d1, 8);
if(s[7]!=1)
ret = 1;
memcpy(s, &d2, 8);
if(s[7]!=1)
ret = 1;
memcpy(s, &d3, 8);
if(s[7]!=0)
ret = 1;
memcpy(s, &d4, 8);
if(s[7]!=2)
ret = 1;
done:
exit(ret);
}
], [hdf5_cv_sw_ulong_to_fp_bottom_bit_works=yes], [hdf5_cv_sw_ulong_to_fp_bottom_bit_works=no],)])
else
AC_CACHE_VAL([hdf5_cv_sw_ulong_to_fp_bottom_bit_works], [hdf5_cv_sw_ulong_to_fp_bottom_bit_works=yes])
fi
if test ${hdf5_cv_sw_ulong_to_fp_bottom_bit_works} = "yes"; then
AC_DEFINE([SW_ULONG_TO_FP_BOTTOM_BIT_WORKS], [1],
[Define if your system can accurately convert unsigned long long values to floating-point values.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can accurately convert
dnl 'float' or 'double' to 'unsigned (long) long' values.
dnl (This flag should be set for all machines, except for PGI compiler
dnl where round-up happens when the fraction of float-point value is greater
dnl than 0.5.
dnl
AC_MSG_CHECKING([if accurately roundup converting floating-point to unsigned long long values])
AC_CACHE_VAL([hdf5_cv_fp_to_ullong_bottom_bit_works],
[AC_TRY_RUN([
int main(void)
{
float f = 111.60f;
double d = 222.55L;
unsigned long long l1 = (unsigned long long)f;
unsigned long long l2 = (unsigned long long)d;
int ret = 0;
if(l1 == 112)
ret = 1;
if(l2 == 223)
ret = 1;
done:
exit(ret);
}
], [hdf5_cv_fp_to_ullong_bottom_bit_works=yes], [hdf5_cv_fp_to_ullong_bottom_bit_works=no],)])
if test ${hdf5_cv_fp_to_ullong_bottom_bit_works} = "yes"; then
AC_DEFINE([FP_TO_ULLONG_BOTTOM_BIT_WORKS], [1],
[Define if your system roundup accurately convert floating-point to unsigned long long values.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can accurately convert
dnl 'float' or 'double' to 'unsigned (long) long' values.
dnl (This flag should be set for all machines, except for HP-UX machines
dnl where the maximal number for unsigned long long is 0x7fffffffffffffff
dnl during conversion.
dnl
AC_MSG_CHECKING([if right maximum converting floating-point to unsigned long long values])
AC_CACHE_VAL([hdf5_cv_fp_to_ullong_right_maximum],
[AC_TRY_RUN([
int main(void)
{
float f = 9701917572145405952.00f;
double d1 = 9701917572145405952.00L;
double d2 = 2e40L;
unsigned long long l1 = (unsigned long long)f;
unsigned long long l2 = (unsigned long long)d1;
unsigned long long l3;
unsigned long long l4 = 0x7fffffffffffffffLLU;
int ret = 0;
if(l1 <= l4 || l2 <= l4)
ret = 1;
l3 = (unsigned long long)d2;
if(l3 <= l4)
ret = 1;
done:
exit(ret);
}
], [hdf5_cv_fp_to_ullong_right_maximum=yes], [hdf5_cv_fp_to_ullong_right_maximum=no],)])
if test ${hdf5_cv_fp_to_ullong_right_maximum} = "yes"; then
AC_DEFINE([FP_TO_ULLONG_RIGHT_MAXIMUM], [1],
[Define if your system has right maximum convert floating-point to unsigned long long values.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can _compile_
dnl 'unsigned long long' to 'float' and 'double' typecasts.
dnl (This flag should be set for all machines, except for under Windows when
dnl compiled with Visual Studio 6, where the macro value is set in the
dnl src/H5pubconf.h file)
dnl
AC_MSG_CHECKING([if compiling unsigned long long to floating-point typecasts work])
AC_CACHE_VAL([hdf5_cv_ullong_to_fp_cast_works], [hdf5_cv_ullong_to_fp_cast_works=yes])
if test ${hdf5_cv_ullong_to_fp_cast_works} = "yes"; then
AC_DEFINE([ULLONG_TO_FP_CAST_WORKS], [1],
[Define if your system can compile unsigned long long to floating-point casts.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl ----------------------------------------------------------------------
dnl Set some variables for general configuration information to be saved
dnl and installed with the libraries.
dnl
dnl HDF5 version from the first line of the README.txt file.
H5_VERSION="`cut -d' ' -f3 $srcdir/README.txt | head -1`"
AC_SUBST([H5_VERSION])
dnl Configuration date
AC_SUBST([CONFIG_DATE]) CONFIG_DATE="`date`"
dnl User doing the configuration
AC_SUBST([CONFIG_USER]) CONFIG_USER="`whoami`@`hostname`"
if test -n "$ORGANIZATION"; then
CONFIG_USER="$CONFIG_USER at $ORGANIZATION"
fi
dnl Configuration mode (production, development, profile, etc) saved above.
AC_SUBST([CONFIG_MODE])
dnl Byte sex from the AC_C_BIGENDIAN macro.
AC_SUBST([BYTESEX])
if test "X$ac_cv_c_bigendian" = "Xyes"; then
BYTESEX="big-endian"
else
BYTESEX="little-endian"
fi
dnl Are we compiling static libraries, shared libraries, or both? This
dnl is only used for the libhdf5.settings file. We can't just look at
dnl $enable_static and $enable_shared because if they're yes the ltconfig
dnl might have decided that one or the other is simply not possible.
dnl Therefore we have to look in the generated `libtool' shell script for
dnl lines that set the value of `build_libtool_libs' (shared) and
dnl `build_old_libs' (static).
AC_SUBST([STATIC_SHARED])
if (grep '^build_libtool_libs=yes' libtool >/dev/null); then
enable_shared=yes
else
enable_shared=no
fi
if (grep '^build_old_libs=yes' libtool >/dev/null); then
enable_static=yes
else
enable_static=no
fi
if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then
STATIC_SHARED="static, shared"
elif test "X$enable_static" = "Xyes"; then
STATIC_SHARED="static"
elif test "X$enable_shared" = "Xyes"; then
STATIC_SHARED="shared"
else
STATIC_SHARED="none"
fi
dnl Parallel support? (set above except empty if none)
PARALLEL=${PARALLEL:-no}
dnl Compiler with version information. This consists of the full path
dnl name of the compiler and the reported version number.
AC_SUBST([CC_VERSION])
if `echo $CC | grep / 2>&1 /dev/null`; then
CC_VERSION="$CC"
else
CC_VERSION="$CC";
for x in `echo $PATH | sed -e 's/:/ /g'`; do
if test -x $x/$CC; then
CC_VERSION="$x/$CC"
break
fi
done
fi
if test -n "$cc_vendor" && test -n "$cc_version"; then
CC_VERSION="$CC_VERSION ($cc_vendor-$cc_version)"
fi
dnl ----------------------------------------------------------------------
dnl Where is the root of the source tree. Give an absolute address so
dnl we can find it no matter which directory of the distribution is our
dnl current directory. The built-in pwd fails on some systems, but the
dnl /bin/pwd version works OK.
dnl
if test -x /bin/pwd; then
pwd=/bin/pwd
else
pwd=pwd
fi
AC_SUBST([ROOT]) ROOT="`$pwd`"
dnl ----------------------------------------------------------------------
dnl Determine the runtime libraries we may need to include in the
dnl libtools command so that executables will find the correct dynamic
dnl libraries.
dnl
AC_SUBST([DYNAMIC_DIRS]) DYNAMIC_DIRS=""
if test -n "$LDFLAGS"; then
for d in $LDFLAGS ; do
case "$d" in
-L*)
d="`echo $d | sed -e 's/-L//g'`"
case "$d" in
.*)
dnl If the path isn't absolute, make it so by
dnl prepending the ROOT directory to it.
d=${ROOT}/$d
;;
esac
DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS"
;;
esac
done
fi
if test -n "$CPPFLAGS"; then
TEMP_CPPFLAGS=""
for d in $CPPFLAGS ; do
case "$d" in
-I.*)
dnl If the path isn't absolute, make it so by prepending
dnl the ROOT directory to it.
d="`echo $d | sed -e 's/-I//g'`"
d="-I${ROOT}/${d}"
;;
esac
TEMP_CPPFLAGS="$d $TEMP_CPPFLAGS"
done
CPPFLAGS=$TEMP_CPPFLAGS
fi
dnl ----------------------------------------------------------------------
dnl Build the Makefiles. Almost every Makefile.in will begin with the line
dnl `@COMMENCE@' and end with the line `@CONCLUDE@'. These lines insert
dnl various files from the config directory into the Makefile.
dnl
AC_SUBST_FILE([COMMENCE]) COMMENCE=config/commence
AC_SUBST_FILE([CONCLUDE]) CONCLUDE=config/conclude
dnl The directory search list
AC_SUBST([SEARCH]) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"'
SEARCH="$SEARCH_RULE`eval $cmd`"
export SEARCH
dnl We don't need to say when we're entering directories if we're using
dnl GNU make because make does it for us.
if test "X$GMAKE" = "Xyes"; then
AC_SUBST([SETX]) SETX=":"
else
AC_SUBST([SETX]) SETX="set -x"
fi
dnl Some cleanup stuff
rm -f conftest conftest.o conftest.c dummy.o
dnl Build config.status, touch the stamp files, and build all the Makefiles.
dnl The order is such that the first `make' does not need to update any
dnl configuration information. See config/commence.in for the order in which
dnl things need to be done.
# First the stamp1 file for H5config.h.in
mkdir ./config >/dev/null 2>&1
touch ./config/stamp1
# Then the config.status file (but not makefiles)
saved_no_create=$no_create
no_create=yes
PARALLEL_MAKE=""
FORTRAN_PARALLEL_MAKE=""
if test -n "$TESTPARALLEL"; then
PARALLEL_MAKE="$TESTPARALLEL/Makefile $TESTPARALLEL/testph5.sh"
if test "X$HDF_FORTRAN" = "Xyes"; then
FORTRAN_PARALLEL_MAKE=fortran/$TESTPARALLEL/Makefile
fi
fi
PABLO_MAKE=""
AC_SUBST([PARALLEL_PABLO]) PARALLEL_PABLO=""
if test "X$HAVE_PABLO" = "Xyes"; then
PABLO_MAKE="pablo/Makefile"
if test -n "$TESTPARALLEL"; then
PARALLEL_PABLO="yes"
fi
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
FORTRAN_FILES="fortran/Makefile
fortran/src/h5fc
fortran/src/H5fortran_types.f90
fortran/src/libhdf5_fortran.settings
fortran/src/Makefile
fortran/test/Makefile
$FORTRAN_PARALLEL_MAKE
fortran/examples/Makefile"
fi
if test "X$HDF_CXX" = "Xyes"; then
CXX_FILES="c++/Makefile
c++/src/Makefile
c++/src/h5c++
c++/test/Makefile
c++/examples/Makefile"
fi
AC_CONFIG_FILES([src/libhdf5.settings
config/depend1
config/depend2
config/depend3
config/depend4
config/dependN
config/commence
config/conclude
Makefile
src/Makefile
$PABLO_MAKE
test/Makefile
$PARALLEL_MAKE
perform/Makefile
tools/Makefile
tools/h5dump/Makefile
tools/h5dump/testh5dump.sh
tools/h5import/Makefile
tools/h5diff/Makefile
tools/h5repack/Makefile
tools/h5repack/h5repack.sh
tools/h5ls/Makefile
tools/lib/Makefile
tools/misc/Makefile
tools/misc/h5cc
tools/gifconv/Makefile
tools/h5jam/Makefile
tools/h5jam/testh5jam.sh
examples/Makefile
doc/Makefile
doc/html/Makefile
doc/html/ed_libs/Makefile
doc/html/ed_styles/Makefile
doc/html/ADGuide/Makefile
doc/html/Graphics/Makefile
doc/html/Intro/Makefile
doc/html/PSandPDF/Makefile
doc/html/TechNotes/Makefile
doc/html/Tutor/Makefile
doc/html/Tutor/Graphics/Makefile
doc/html/Tutor/examples/Makefile
doc/html/cpplus/Makefile
doc/html/fortran/Makefile
$FORTRAN_FILES
$CXX_FILES])
AC_OUTPUT
no_create=$saved_no_create
# Then the stamp2 file for H5config.h
touch ./config/stamp2
# Finally the makefiles
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
chmod 755 tools/misc/h5cc
if test "X$HDF_FORTRAN" = "Xyes"; then
chmod 755 fortran/src/h5fc
fi
if test "X$HDF_CXX" = "Xyes"; then
chmod 755 c++/src/h5c++
fi
dnl We don't want inline defined for C++ compilers
dnl Don't worry about the C++ ifdef wrappers in the H5pubconf file, since
dnl 'H5_inline' isn't a C++ keyword.
cat >> src/H5config.h <<EOF
#if defined(__cplusplus) && defined(inline)
#undef inline
#endif
EOF
dnl ----------------------------------------------------------------------
dnl Print out a summary of what we are going to build.
dnl
if test -z "$ECHO_N" -o -z "$ECHO_C"; then
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ECHO_N=''
ECHO_C='
'
else
ECHO_N=-n
ECHO_C=''
fi
else
ECHO_N=''
ECHO_C='\c'
fi
fi
PRINT_PLAIN() {
echo $ECHO_N "$1$ECHO_C"
echo $ECHO_N "$1$ECHO_C" 1>>src/libhdf5.settings
}
PRINT_N() {
echo $ECHO_N "$1: $ECHO_C"
echo $ECHO_N "$1: $ECHO_C" 1>>src/libhdf5.settings
}
PRINT() {
echo "$1"
echo "$1" 1>>src/libhdf5.settings
}
dnl ----------------------------------------------------------------------
dnl Print "Yes" if all arguments are "yes", otherwise "No"
dnl
IF_YES_NO() {
if test $# -lt 1; then
PRINT "No"
return
else
while test $# -gt 0; do
if test "$1" != "yes"; then
PRINT "No"
return
fi
shift
done
fi
PRINT "Yes"
}
IF_ENABLED_DISABLED() {
if test "$1" = "yes"; then
PRINT "Enabled"
else
PRINT "Disabled"
fi
}
PRINT "Configure Summary"
PRINT "Compiling Options:"
PRINT_N " Compilation Mode"
case "X-$enable_production" in
X-yes) PRINT "Production" ;;
X-no) PRINT "Development" ;;
X-profile) PRINT "Profile" ;;
*) PRINT "$enable_production" ;;
esac
PRINT_N " C Compiler"
PRINT "$CC"
PRINT_N " CFLAGS"
PRINT "$CFLAGS"
PRINT_N " CPPFLAGS"
PRINT "$CPPFLAGS"
PRINT_N " LDFLAGS"
PRINT "$LDFLAGS"
PRINT_N " Debug Mode"
if test "X$DEBUG_PKG" = "X$all_packages"; then
PRINT "All"
elif test "X$DEBUG_PKG" = "X"; then
PRINT "None"
else
PRINT $DEBUG_PKG
fi
PRINT_N " Shared Libraries"
IF_YES_NO "$enable_shared"
PRINT_N " Static Libraries"
IF_YES_NO "$enable_static"
PRINT_N " Statically Linked Executables"
IF_YES_NO "$STATIC_EXEC"
PRINT_N " Tracing"
IF_YES_NO "$TRACE_API"
PRINT_N " Optimization Instrumentation"
IF_YES_NO "$INSTRUMENT"
PRINT "Languages:"
PRINT_N " C++"
IF_YES_NO "$HDF_CXX"
if test X$HDF_CXX = Xyes; then
PRINT_N " C++ Compiler"
PRINT "$CXX"
PRINT_N " CXXFLAGS"
PRINT "$CXXFLAGS"
fi
PRINT_N " Fortran"
IF_YES_NO "$HDF_FORTRAN"
if test X$HDF_FORTRAN = Xyes; then
PRINT_N " Fortran Compiler"
PRINT "$F9X"
PRINT_N " FFLAGS"
PRINT "$FFLAGS"
fi
PRINT "Features:"
PRINT_N " dmalloc"
IF_YES_NO "$HAVE_DMALLOC"
PRINT_N " Flexible Parallel HDF"
IF_YES_NO "$FPHDF5"
PRINT_N " Function Stack Tracing"
IF_ENABLED_DISABLED "$FUNCSTACK"
PRINT_N " GASS"
IF_YES_NO "$GASS"
PRINT_N " GPFS"
IF_YES_NO "$GPFS"
PRINT_N " HDF5 v1.6 Compatibility"
IF_YES_NO "$HDF5_V1_6_COMPAT"
PRINT_N " hsize_t"
case "$HSIZET" in
no|small) PRINT "Small" ;;
*) PRINT "Large" ;;
esac
PRINT_N " I/O filters (external)"
PRINT "$EXTERNAL_FILTERS"
PRINT_N " I/O filters (internal)"
PRINT "$FILTERS"
PRINT_N " Linux Large File Support (LFS)"
IF_ENABLED_DISABLED "$LINUX_LFS"
PRINT_N " MPE"
IF_YES_NO "$MPE"
PRINT_N " Pablo"
IF_YES_NO "$HAVE_PABLO"
PRINT_N " Parallel HDF5"
if test "$PARALLEL" != "no"; then
PRINT "Yes"
else
PRINT "No"
fi
PRINT_N " SRB"
IF_YES_NO "$SRB"
PRINT_N " Stream VFD"
IF_ENABLED_DISABLED "$STREAM_VFD"
PRINT_N " Threadsafety"
IF_ENABLED_DISABLED "$THREADSAFE"
Reference in New Issue View Git Blame Copy Permalink