mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2025-01-06 14:56:51 +08:00
Code Issues Packages Projects Releases Wiki Activity
a2217d58c8
hdf5/test/Makefile.in
Albert Cheng a2217d58c8 [svn-r10849] Purpose: 
bug fix

Description:
check-s and check-p were set as pre-requistics of test.  They
would get executed in parallel if parallel make is used.  This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.

Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.

Platforms tested:
heping PP.
2005-06-02 18:42:48 -05:00

1184 lines
50 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
#
# HDF5 Library Test Makefile(.in)
#
SOURCES = $(libh5test_la_SOURCES) big.c bittests.c blocktrack.c btree2.c cache.c cmpd_dset.c dangle.c dsets.c dt_atomic.c dtransform.c dtypes.c enum.c err_compat.c error_test.c extend.c external.c file_handle.c filename.c fillval.c flush1.c flush2.c getname.c gheap.c hyperslab.c istore.c lheap.c links.c mount.c mtime.c ntypes.c ohdr.c pool.c reserved.c set_extent.c sheap.c stab.c stream_test.c $(testhdf5_SOURCES) testmeta.c $(ttsafe_SOURCES) unlink.c
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/config/commence.am \
$(top_srcdir)/config/conclude.am
check_PROGRAMS = $(am__EXEEXT_1) error_test$(EXEEXT) \
err_compat$(EXEEXT) testmeta$(EXEEXT)
subdir = test
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
am__DEPENDENCIES_1 = $(top_builddir)/src/libhdf5.la
libh5test_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
am_libh5test_la_OBJECTS = h5test.lo testframe.lo
libh5test_la_OBJECTS = $(am_libh5test_la_OBJECTS)
am__EXEEXT_1 = testhdf5$(EXEEXT) lheap$(EXEEXT) ohdr$(EXEEXT) \
stab$(EXEEXT) gheap$(EXEEXT) cache$(EXEEXT) btree2$(EXEEXT) \
blocktrack$(EXEEXT) sheap$(EXEEXT) pool$(EXEEXT) \
hyperslab$(EXEEXT) istore$(EXEEXT) bittests$(EXEEXT) \
dt_atomic$(EXEEXT) dtypes$(EXEEXT) dsets$(EXEEXT) \
cmpd_dset$(EXEEXT) extend$(EXEEXT) external$(EXEEXT) \
links$(EXEEXT) unlink$(EXEEXT) big$(EXEEXT) mtime$(EXEEXT) \
fillval$(EXEEXT) mount$(EXEEXT) flush1$(EXEEXT) \
flush2$(EXEEXT) enum$(EXEEXT) set_extent$(EXEEXT) \
ttsafe$(EXEEXT) stream_test$(EXEEXT) getname$(EXEEXT) \
file_handle$(EXEEXT) ntypes$(EXEEXT) dangle$(EXEEXT) \
dtransform$(EXEEXT) filename$(EXEEXT) reserved$(EXEEXT)
big_SOURCES = big.c
big_OBJECTS = big.$(OBJEXT)
big_LDADD = $(LDADD)
big_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
bittests_SOURCES = bittests.c
bittests_OBJECTS = bittests.$(OBJEXT)
bittests_LDADD = $(LDADD)
bittests_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
blocktrack_SOURCES = blocktrack.c
blocktrack_OBJECTS = blocktrack.$(OBJEXT)
blocktrack_LDADD = $(LDADD)
blocktrack_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
btree2_SOURCES = btree2.c
btree2_OBJECTS = btree2.$(OBJEXT)
btree2_LDADD = $(LDADD)
btree2_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
cache_SOURCES = cache.c
cache_OBJECTS = cache.$(OBJEXT)
cache_LDADD = $(LDADD)
cache_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
cmpd_dset_SOURCES = cmpd_dset.c
cmpd_dset_OBJECTS = cmpd_dset.$(OBJEXT)
cmpd_dset_LDADD = $(LDADD)
cmpd_dset_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dangle_SOURCES = dangle.c
dangle_OBJECTS = dangle.$(OBJEXT)
dangle_LDADD = $(LDADD)
dangle_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dsets_SOURCES = dsets.c
dsets_OBJECTS = dsets.$(OBJEXT)
dsets_LDADD = $(LDADD)
dsets_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dt_atomic_SOURCES = dt_atomic.c
dt_atomic_OBJECTS = dt_atomic.$(OBJEXT)
dt_atomic_LDADD = $(LDADD)
dt_atomic_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dtransform_SOURCES = dtransform.c
dtransform_OBJECTS = dtransform.$(OBJEXT)
dtransform_LDADD = $(LDADD)
dtransform_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dtypes_SOURCES = dtypes.c
dtypes_OBJECTS = dtypes.$(OBJEXT)
dtypes_LDADD = $(LDADD)
dtypes_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
enum_SOURCES = enum.c
enum_OBJECTS = enum.$(OBJEXT)
enum_LDADD = $(LDADD)
enum_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
err_compat_SOURCES = err_compat.c
err_compat_OBJECTS = err_compat.$(OBJEXT)
err_compat_LDADD = $(LDADD)
err_compat_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
error_test_SOURCES = error_test.c
error_test_OBJECTS = error_test.$(OBJEXT)
error_test_LDADD = $(LDADD)
error_test_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
extend_SOURCES = extend.c
extend_OBJECTS = extend.$(OBJEXT)
extend_LDADD = $(LDADD)
extend_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
external_SOURCES = external.c
external_OBJECTS = external.$(OBJEXT)
external_LDADD = $(LDADD)
external_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
file_handle_SOURCES = file_handle.c
file_handle_OBJECTS = file_handle.$(OBJEXT)
file_handle_LDADD = $(LDADD)
file_handle_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
filename_SOURCES = filename.c
filename_OBJECTS = filename.$(OBJEXT)
filename_LDADD = $(LDADD)
filename_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
fillval_SOURCES = fillval.c
fillval_OBJECTS = fillval.$(OBJEXT)
fillval_LDADD = $(LDADD)
fillval_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
flush1_SOURCES = flush1.c
flush1_OBJECTS = flush1.$(OBJEXT)
flush1_LDADD = $(LDADD)
flush1_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
flush2_SOURCES = flush2.c
flush2_OBJECTS = flush2.$(OBJEXT)
flush2_LDADD = $(LDADD)
flush2_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
getname_SOURCES = getname.c
getname_OBJECTS = getname.$(OBJEXT)
getname_LDADD = $(LDADD)
getname_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
gheap_SOURCES = gheap.c
gheap_OBJECTS = gheap.$(OBJEXT)
gheap_LDADD = $(LDADD)
gheap_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
hyperslab_SOURCES = hyperslab.c
hyperslab_OBJECTS = hyperslab.$(OBJEXT)
hyperslab_LDADD = $(LDADD)
hyperslab_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
istore_SOURCES = istore.c
istore_OBJECTS = istore.$(OBJEXT)
istore_LDADD = $(LDADD)
istore_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
lheap_SOURCES = lheap.c
lheap_OBJECTS = lheap.$(OBJEXT)
lheap_LDADD = $(LDADD)
lheap_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
links_SOURCES = links.c
links_OBJECTS = links.$(OBJEXT)
links_LDADD = $(LDADD)
links_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
mount_SOURCES = mount.c
mount_OBJECTS = mount.$(OBJEXT)
mount_LDADD = $(LDADD)
mount_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
mtime_SOURCES = mtime.c
mtime_OBJECTS = mtime.$(OBJEXT)
mtime_LDADD = $(LDADD)
mtime_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
ntypes_SOURCES = ntypes.c
ntypes_OBJECTS = ntypes.$(OBJEXT)
ntypes_LDADD = $(LDADD)
ntypes_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
ohdr_SOURCES = ohdr.c
ohdr_OBJECTS = ohdr.$(OBJEXT)
ohdr_LDADD = $(LDADD)
ohdr_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
pool_SOURCES = pool.c
pool_OBJECTS = pool.$(OBJEXT)
pool_LDADD = $(LDADD)
pool_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
reserved_SOURCES = reserved.c
reserved_OBJECTS = reserved.$(OBJEXT)
reserved_LDADD = $(LDADD)
reserved_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
set_extent_SOURCES = set_extent.c
set_extent_OBJECTS = set_extent.$(OBJEXT)
set_extent_LDADD = $(LDADD)
set_extent_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
sheap_SOURCES = sheap.c
sheap_OBJECTS = sheap.$(OBJEXT)
sheap_LDADD = $(LDADD)
sheap_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
stab_SOURCES = stab.c
stab_OBJECTS = stab.$(OBJEXT)
stab_LDADD = $(LDADD)
stab_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
stream_test_SOURCES = stream_test.c
stream_test_OBJECTS = stream_test.$(OBJEXT)
stream_test_LDADD = $(LDADD)
stream_test_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
am_testhdf5_OBJECTS = testhdf5.$(OBJEXT) tarray.$(OBJEXT) \
tattr.$(OBJEXT) tconfig.$(OBJEXT) tfile.$(OBJEXT) \
tgenprop.$(OBJEXT) th5s.$(OBJEXT) theap.$(OBJEXT) \
tid.$(OBJEXT) titerate.$(OBJEXT) tmeta.$(OBJEXT) \
tmisc.$(OBJEXT) ttime.$(OBJEXT) trefer.$(OBJEXT) \
trefstr.$(OBJEXT) tselect.$(OBJEXT) tskiplist.$(OBJEXT) \
ttst.$(OBJEXT) tunicode.$(OBJEXT) tvltypes.$(OBJEXT) \
tvlstr.$(OBJEXT)
testhdf5_OBJECTS = $(am_testhdf5_OBJECTS)
testhdf5_LDADD = $(LDADD)
testhdf5_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
testmeta_SOURCES = testmeta.c
testmeta_OBJECTS = testmeta.$(OBJEXT)
testmeta_LDADD = $(LDADD)
testmeta_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
am_ttsafe_OBJECTS = ttsafe.$(OBJEXT) ttsafe_dcreate.$(OBJEXT) \
ttsafe_error.$(OBJEXT) ttsafe_cancel.$(OBJEXT) \
ttsafe_acreate.$(OBJEXT)
ttsafe_OBJECTS = $(am_ttsafe_OBJECTS)
ttsafe_LDADD = $(LDADD)
ttsafe_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
unlink_SOURCES = unlink.c
unlink_OBJECTS = unlink.$(OBJEXT)
unlink_LDADD = $(LDADD)
unlink_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src
depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libh5test_la_SOURCES) big.c bittests.c blocktrack.c \
btree2.c cache.c cmpd_dset.c dangle.c dsets.c dt_atomic.c \
dtransform.c dtypes.c enum.c err_compat.c error_test.c \
extend.c external.c file_handle.c filename.c fillval.c \
flush1.c flush2.c getname.c gheap.c hyperslab.c istore.c \
lheap.c links.c mount.c mtime.c ntypes.c ohdr.c pool.c \
reserved.c set_extent.c sheap.c stab.c stream_test.c \
$(testhdf5_SOURCES) testmeta.c $(ttsafe_SOURCES) unlink.c
DIST_SOURCES = $(libh5test_la_SOURCES) big.c bittests.c blocktrack.c \
btree2.c cache.c cmpd_dset.c dangle.c dsets.c dt_atomic.c \
dtransform.c dtypes.c enum.c err_compat.c error_test.c \
extend.c external.c file_handle.c filename.c fillval.c \
flush1.c flush2.c getname.c gheap.c hyperslab.c istore.c \
lheap.c links.c mount.c mtime.c ntypes.c ohdr.c pool.c \
reserved.c set_extent.c sheap.c stab.c stream_test.c \
$(testhdf5_SOURCES) testmeta.c $(ttsafe_SOURCES) unlink.c
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@
BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@
BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@
BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@
BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@
BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@
BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@
BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@
BUILD_PDB2HDF = @BUILD_PDB2HDF@
BUILD_PDB2HDF_CONDITIONAL_FALSE = @BUILD_PDB2HDF_CONDITIONAL_FALSE@
BUILD_PDB2HDF_CONDITIONAL_TRUE = @BUILD_PDB2HDF_CONDITIONAL_TRUE@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
CFLAGS = @CFLAGS@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCLIBS = @FCLIBS@
FFLAGS = @FFLAGS@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HDF5_INTERFACES = @HDF5_INTERFACES@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZET = @HSIZET@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MPE = @MPE@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SETX = @SETX@
SET_MAKE = @SET_MAKE@
# Hardcode SHELL to be /bin/sh. Most machines have this shell, and
# on at least one machine configure fails to detect its existence (janus).
# Also, when HDF5 is configured on one machine but run on another,
# configure's automatic SHELL detection may not work on the build machine.
SHELL = /bin/sh
SIZE_T = @SIZE_T@
STATIC_SHARED = @STATIC_SHARED@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
TRACE_API = @TRACE_API@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
VERSION = @VERSION@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_FC = @ac_ct_FC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
# Install directories that automake doesn't know about
includedir = $(exec_prefix)/include
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNTESTS instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command. Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNTESTS = $(RUNSERIAL)
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
docdir = $(exec_prefix)/doc
# Scripts used to build examples
H5CC = $(bindir)/h5cc
H5CC_PP = $(bindir)/h5pcc
H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc
INCLUDES = -I$(top_srcdir)/src -I$(top_builddir)/src
# Test script for error_test and err_compat
TEST_SCRIPT = $(top_srcdir)/test/testerror.sh
check_SCRIPTS = $(TEST_SCRIPT)
# These are our main targets. They should be listed in the order to be
# executed, generally most specific tests to least specific tests.
TEST_PROG = testhdf5 lheap ohdr stab gheap cache btree2 blocktrack sheap \
pool hyperslab istore bittests dt_atomic \
dtypes dsets cmpd_dset extend external links unlink big mtime \
fillval mount flush1 flush2 enum \
set_extent ttsafe stream_test \
getname file_handle ntypes dangle dtransform filename reserved
# The libh5test.a library provides common support code for the tests.
check_LTLIBRARIES = libh5test.la
libh5test_la_SOURCES = h5test.c testframe.c
libh5test_la_LIBADD = $(LIBHDF5)
# Build the library statically because some compilers can only link
# one dynamic library and the main hdf5 library is much larger than this
# one.
libh5test_la_LDFLAGS = -static
# Use libhd5test.la to compile all of the tests
LDADD = libh5test.la $(LIBHDF5)
# List the source files for tests that have more than one
ttsafe_SOURCES = ttsafe.c ttsafe_dcreate.c ttsafe_error.c ttsafe_cancel.c \
ttsafe_acreate.c
# Temporary files. These files are the ones created by setting the
# HDF5_NOCLEANUP environment variable and running `make test' without
# specifying a file prefix or low-level driver. Changing the file
# prefix or low-level driver with environment variables will influence
# the temporary file name in ways that the makefile is not aware of.
MOSTLYCLEANFILES = cmpd_dset.h5 compact_dataset.h5 dataset.h5 extend.h5 istore.h5\
tfile[1-4].h5 th5s[1-3].h5 lheap.h5 ohdr.h5 stab[1-2].h5 \
extern_[1-3].h5 extern_[1-4][ab].raw gheap[0-4].h5 dt_atomic[1-2]\
links.h5 links[1-3].h5 big.data big[0-9][0-9][0-9][0-9][0-9].h5 \
dtypes[1-8].h5 dt_atomic[1-2].h5 tattr.h5 tselect.h5 mtime.h5 \
unlink.h5 unicode.h5 \
fillval_[0-9].h5 fillval.raw mount_[0-9].h5 testmeta.h5 ttime.h5 \
trefer[1-3].h5 tvltypes.h5 tvlstr.h5 tvlstr2.h5 flush.h5 \
enum1.h5 titerate.h5 ttsafe.h5 tarray1.h5 tgenprop.h5 \
tmisc[0-9]*.h5 set_extent_read.h5 set_extent_create.h5 \
getname.h5 getname[1-3].h5 sec2_file.h5 \
family_file000[0-3][0-9].h5 multi_file-[rs].h5 core_file \
new_move_[ab].h5 ntypes.h5 dangle.h5 error_test.h5 err_compat.h5 \
dtransform.h5 test_filters.h5 get_file_name.h5 tstint[1-2].h5 \
unlink_chunked.h5 btree2.h5 blocktrack.h5 sheap.h5
# Sources for testhdf5 executable
testhdf5_SOURCES = testhdf5.c tarray.c tattr.c tconfig.c tfile.c tgenprop.c \
th5s.c theap.c tid.c titerate.c tmeta.c tmisc.c ttime.c trefer.c trefstr.c \
tselect.c tskiplist.c ttst.c tunicode.c tvltypes.c tvlstr.c
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign test/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
clean-checkLTLIBRARIES:
-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
@list='$(check_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libh5test.la: $(libh5test_la_OBJECTS) $(libh5test_la_DEPENDENCIES)
$(LINK) $(libh5test_la_LDFLAGS) $(libh5test_la_OBJECTS) $(libh5test_la_LIBADD) $(LIBS)
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
big$(EXEEXT): $(big_OBJECTS) $(big_DEPENDENCIES)
@rm -f big$(EXEEXT)
$(LINK) $(big_LDFLAGS) $(big_OBJECTS) $(big_LDADD) $(LIBS)
bittests$(EXEEXT): $(bittests_OBJECTS) $(bittests_DEPENDENCIES)
@rm -f bittests$(EXEEXT)
$(LINK) $(bittests_LDFLAGS) $(bittests_OBJECTS) $(bittests_LDADD) $(LIBS)
blocktrack$(EXEEXT): $(blocktrack_OBJECTS) $(blocktrack_DEPENDENCIES)
@rm -f blocktrack$(EXEEXT)
$(LINK) $(blocktrack_LDFLAGS) $(blocktrack_OBJECTS) $(blocktrack_LDADD) $(LIBS)
btree2$(EXEEXT): $(btree2_OBJECTS) $(btree2_DEPENDENCIES)
@rm -f btree2$(EXEEXT)
$(LINK) $(btree2_LDFLAGS) $(btree2_OBJECTS) $(btree2_LDADD) $(LIBS)
cache$(EXEEXT): $(cache_OBJECTS) $(cache_DEPENDENCIES)
@rm -f cache$(EXEEXT)
$(LINK) $(cache_LDFLAGS) $(cache_OBJECTS) $(cache_LDADD) $(LIBS)
cmpd_dset$(EXEEXT): $(cmpd_dset_OBJECTS) $(cmpd_dset_DEPENDENCIES)
@rm -f cmpd_dset$(EXEEXT)
$(LINK) $(cmpd_dset_LDFLAGS) $(cmpd_dset_OBJECTS) $(cmpd_dset_LDADD) $(LIBS)
dangle$(EXEEXT): $(dangle_OBJECTS) $(dangle_DEPENDENCIES)
@rm -f dangle$(EXEEXT)
$(LINK) $(dangle_LDFLAGS) $(dangle_OBJECTS) $(dangle_LDADD) $(LIBS)
dsets$(EXEEXT): $(dsets_OBJECTS) $(dsets_DEPENDENCIES)
@rm -f dsets$(EXEEXT)
$(LINK) $(dsets_LDFLAGS) $(dsets_OBJECTS) $(dsets_LDADD) $(LIBS)
dt_atomic$(EXEEXT): $(dt_atomic_OBJECTS) $(dt_atomic_DEPENDENCIES)
@rm -f dt_atomic$(EXEEXT)
$(LINK) $(dt_atomic_LDFLAGS) $(dt_atomic_OBJECTS) $(dt_atomic_LDADD) $(LIBS)
dtransform$(EXEEXT): $(dtransform_OBJECTS) $(dtransform_DEPENDENCIES)
@rm -f dtransform$(EXEEXT)
$(LINK) $(dtransform_LDFLAGS) $(dtransform_OBJECTS) $(dtransform_LDADD) $(LIBS)
dtypes$(EXEEXT): $(dtypes_OBJECTS) $(dtypes_DEPENDENCIES)
@rm -f dtypes$(EXEEXT)
$(LINK) $(dtypes_LDFLAGS) $(dtypes_OBJECTS) $(dtypes_LDADD) $(LIBS)
enum$(EXEEXT): $(enum_OBJECTS) $(enum_DEPENDENCIES)
@rm -f enum$(EXEEXT)
$(LINK) $(enum_LDFLAGS) $(enum_OBJECTS) $(enum_LDADD) $(LIBS)
err_compat$(EXEEXT): $(err_compat_OBJECTS) $(err_compat_DEPENDENCIES)
@rm -f err_compat$(EXEEXT)
$(LINK) $(err_compat_LDFLAGS) $(err_compat_OBJECTS) $(err_compat_LDADD) $(LIBS)
error_test$(EXEEXT): $(error_test_OBJECTS) $(error_test_DEPENDENCIES)
@rm -f error_test$(EXEEXT)
$(LINK) $(error_test_LDFLAGS) $(error_test_OBJECTS) $(error_test_LDADD) $(LIBS)
extend$(EXEEXT): $(extend_OBJECTS) $(extend_DEPENDENCIES)
@rm -f extend$(EXEEXT)
$(LINK) $(extend_LDFLAGS) $(extend_OBJECTS) $(extend_LDADD) $(LIBS)
external$(EXEEXT): $(external_OBJECTS) $(external_DEPENDENCIES)
@rm -f external$(EXEEXT)
$(LINK) $(external_LDFLAGS) $(external_OBJECTS) $(external_LDADD) $(LIBS)
file_handle$(EXEEXT): $(file_handle_OBJECTS) $(file_handle_DEPENDENCIES)
@rm -f file_handle$(EXEEXT)
$(LINK) $(file_handle_LDFLAGS) $(file_handle_OBJECTS) $(file_handle_LDADD) $(LIBS)
filename$(EXEEXT): $(filename_OBJECTS) $(filename_DEPENDENCIES)
@rm -f filename$(EXEEXT)
$(LINK) $(filename_LDFLAGS) $(filename_OBJECTS) $(filename_LDADD) $(LIBS)
fillval$(EXEEXT): $(fillval_OBJECTS) $(fillval_DEPENDENCIES)
@rm -f fillval$(EXEEXT)
$(LINK) $(fillval_LDFLAGS) $(fillval_OBJECTS) $(fillval_LDADD) $(LIBS)
flush1$(EXEEXT): $(flush1_OBJECTS) $(flush1_DEPENDENCIES)
@rm -f flush1$(EXEEXT)
$(LINK) $(flush1_LDFLAGS) $(flush1_OBJECTS) $(flush1_LDADD) $(LIBS)
flush2$(EXEEXT): $(flush2_OBJECTS) $(flush2_DEPENDENCIES)
@rm -f flush2$(EXEEXT)
$(LINK) $(flush2_LDFLAGS) $(flush2_OBJECTS) $(flush2_LDADD) $(LIBS)
getname$(EXEEXT): $(getname_OBJECTS) $(getname_DEPENDENCIES)
@rm -f getname$(EXEEXT)
$(LINK) $(getname_LDFLAGS) $(getname_OBJECTS) $(getname_LDADD) $(LIBS)
gheap$(EXEEXT): $(gheap_OBJECTS) $(gheap_DEPENDENCIES)
@rm -f gheap$(EXEEXT)
$(LINK) $(gheap_LDFLAGS) $(gheap_OBJECTS) $(gheap_LDADD) $(LIBS)
hyperslab$(EXEEXT): $(hyperslab_OBJECTS) $(hyperslab_DEPENDENCIES)
@rm -f hyperslab$(EXEEXT)
$(LINK) $(hyperslab_LDFLAGS) $(hyperslab_OBJECTS) $(hyperslab_LDADD) $(LIBS)
istore$(EXEEXT): $(istore_OBJECTS) $(istore_DEPENDENCIES)
@rm -f istore$(EXEEXT)
$(LINK) $(istore_LDFLAGS) $(istore_OBJECTS) $(istore_LDADD) $(LIBS)
lheap$(EXEEXT): $(lheap_OBJECTS) $(lheap_DEPENDENCIES)
@rm -f lheap$(EXEEXT)
$(LINK) $(lheap_LDFLAGS) $(lheap_OBJECTS) $(lheap_LDADD) $(LIBS)
links$(EXEEXT): $(links_OBJECTS) $(links_DEPENDENCIES)
@rm -f links$(EXEEXT)
$(LINK) $(links_LDFLAGS) $(links_OBJECTS) $(links_LDADD) $(LIBS)
mount$(EXEEXT): $(mount_OBJECTS) $(mount_DEPENDENCIES)
@rm -f mount$(EXEEXT)
$(LINK) $(mount_LDFLAGS) $(mount_OBJECTS) $(mount_LDADD) $(LIBS)
mtime$(EXEEXT): $(mtime_OBJECTS) $(mtime_DEPENDENCIES)
@rm -f mtime$(EXEEXT)
$(LINK) $(mtime_LDFLAGS) $(mtime_OBJECTS) $(mtime_LDADD) $(LIBS)
ntypes$(EXEEXT): $(ntypes_OBJECTS) $(ntypes_DEPENDENCIES)
@rm -f ntypes$(EXEEXT)
$(LINK) $(ntypes_LDFLAGS) $(ntypes_OBJECTS) $(ntypes_LDADD) $(LIBS)
ohdr$(EXEEXT): $(ohdr_OBJECTS) $(ohdr_DEPENDENCIES)
@rm -f ohdr$(EXEEXT)
$(LINK) $(ohdr_LDFLAGS) $(ohdr_OBJECTS) $(ohdr_LDADD) $(LIBS)
pool$(EXEEXT): $(pool_OBJECTS) $(pool_DEPENDENCIES)
@rm -f pool$(EXEEXT)
$(LINK) $(pool_LDFLAGS) $(pool_OBJECTS) $(pool_LDADD) $(LIBS)
reserved$(EXEEXT): $(reserved_OBJECTS) $(reserved_DEPENDENCIES)
@rm -f reserved$(EXEEXT)
$(LINK) $(reserved_LDFLAGS) $(reserved_OBJECTS) $(reserved_LDADD) $(LIBS)
set_extent$(EXEEXT): $(set_extent_OBJECTS) $(set_extent_DEPENDENCIES)
@rm -f set_extent$(EXEEXT)
$(LINK) $(set_extent_LDFLAGS) $(set_extent_OBJECTS) $(set_extent_LDADD) $(LIBS)
sheap$(EXEEXT): $(sheap_OBJECTS) $(sheap_DEPENDENCIES)
@rm -f sheap$(EXEEXT)
$(LINK) $(sheap_LDFLAGS) $(sheap_OBJECTS) $(sheap_LDADD) $(LIBS)
stab$(EXEEXT): $(stab_OBJECTS) $(stab_DEPENDENCIES)
@rm -f stab$(EXEEXT)
$(LINK) $(stab_LDFLAGS) $(stab_OBJECTS) $(stab_LDADD) $(LIBS)
stream_test$(EXEEXT): $(stream_test_OBJECTS) $(stream_test_DEPENDENCIES)
@rm -f stream_test$(EXEEXT)
$(LINK) $(stream_test_LDFLAGS) $(stream_test_OBJECTS) $(stream_test_LDADD) $(LIBS)
testhdf5$(EXEEXT): $(testhdf5_OBJECTS) $(testhdf5_DEPENDENCIES)
@rm -f testhdf5$(EXEEXT)
$(LINK) $(testhdf5_LDFLAGS) $(testhdf5_OBJECTS) $(testhdf5_LDADD) $(LIBS)
testmeta$(EXEEXT): $(testmeta_OBJECTS) $(testmeta_DEPENDENCIES)
@rm -f testmeta$(EXEEXT)
$(LINK) $(testmeta_LDFLAGS) $(testmeta_OBJECTS) $(testmeta_LDADD) $(LIBS)
ttsafe$(EXEEXT): $(ttsafe_OBJECTS) $(ttsafe_DEPENDENCIES)
@rm -f ttsafe$(EXEEXT)
$(LINK) $(ttsafe_LDFLAGS) $(ttsafe_OBJECTS) $(ttsafe_LDADD) $(LIBS)
unlink$(EXEEXT): $(unlink_OBJECTS) $(unlink_DEPENDENCIES)
@rm -f unlink$(EXEEXT)
$(LINK) $(unlink_LDFLAGS) $(unlink_OBJECTS) $(unlink_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/big.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bittests.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blocktrack.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/btree2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmpd_dset.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dangle.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsets.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dt_atomic.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtransform.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enum.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/err_compat.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error_test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extend.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/external.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_handle.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filename.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fillval.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush1.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getname.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5test.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hyperslab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/istore.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/links.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mount.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mtime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ohdr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pool.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reserved.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set_extent.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tarray.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tattr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tconfig.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testframe.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testhdf5.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testmeta.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tgenprop.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5s.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/theap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tid.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/titerate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmeta.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmisc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tselect.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tskiplist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_acreate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_cancel.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_dcreate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_error.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttst.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tunicode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvlstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvltypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unlink.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/../config
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) \
$(check_SCRIPTS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
clean-libtool mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-libtool distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am:
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am
.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \
clean clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
clean-libtool ctags distclean distclean-compile \
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-exec install-exec-am \
install-info install-info-am install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags uninstall uninstall-am uninstall-info-am
# Additional target for running timing test
timings _timings: testmeta
@for timing in $(TIMINGS) dummy; do \
if test $$timing != dummy; then \
echo "Running $$timing $(TEST_FLAGS)"; \
$(RUNTEST) ./$$timing $(TEST_FLAGS) || exit 1; \
fi; \
done;
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(TESTS)
lib progs tests ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; \
for d in X $(SUBDIRS); do \
if test $$d != X -a $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
install-doc uninstall-doc:
@echo "Nothing to be done."
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test:
$(MAKE) check-s
$(MAKE) check-p
check-s: $(LIB) $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@for test in $(TEST_PROG) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNTESTS) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPT) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
/bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
check-p: $(LIB) $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
srcdir="$(srcdir)" \
$(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPT_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
if test "X$(HDF_FORTRAN)" = "Xyes"; then \
echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \
elif test "X$(HDF_CXX)" = "Xyes"; then \
echo "C++ API: Testing $$test $(TEST_FLAGS)"; \
else \
echo "Testing $$test $(TEST_FLAGS)"; \
fi; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
/bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd:
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink