hdf5/test/h5test.h

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by The HDF Group.                                               *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the COPYING file, which can be found at the root of the source code       *
 * distribution tree, or in https://www.hdfgroup.org/licenses.               *
 * If you do not have access to either file, you may request a copy from     *
 * help@hdfgroup.org.                                                        *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/*
 * Programmer:  Robb Matzke
 *              Friday, November 20, 1998
 *
 * Purpose:     Test support stuff.
 */
#ifndef H5TEST_H
#define H5TEST_H

/*
 * Include required headers.  This file tests internal library functions,
 * so we include the private headers here, along with developer routines.
 */
#include "hdf5.h"
#include "hdf5dev.h"
#include "H5private.h"
#include "H5Eprivate.h"

/*
 * Predefined test verbosity levels.
 *
 * Convention:
 *
 * The higher the verbosity value, the more information printed.
 * So, output for higher verbosity also include output of all lower
 * verbosity.
 *
 *  Value     Description
 *  0         None:   No informational message.
 *  1                 "All tests passed"
 *  2                 Header of overall test
 *  3         Default: header and results of individual test
 *  4
 *  5         Low:    Major category of tests.
 *  6
 *  7         Medium: Minor category of tests such as functions called.
 *  8
 *  9         High:   Highest level.  All information.
 */
#define VERBO_NONE 0 /* None    */
#define VERBO_DEF  3 /* Default */
#define VERBO_LO   5 /* Low     */
#define VERBO_MED  7 /* Medium  */
#define VERBO_HI   9 /* High    */

/*
 * Verbose queries
 * Only None needs an exact match.  The rest are at least as much.
 */

/* A macro version of HDGetTestVerbosity(). */
/* Should be used internally by the libtest.a only. */
#define HDGetTestVerbosity() (TestVerbosity)

#define VERBOSE_NONE (HDGetTestVerbosity() == VERBO_NONE)
#define VERBOSE_DEF  (HDGetTestVerbosity() >= VERBO_DEF)
#define VERBOSE_LO   (HDGetTestVerbosity() >= VERBO_LO)
#define VERBOSE_MED  (HDGetTestVerbosity() >= VERBO_MED)
#define VERBOSE_HI   (HDGetTestVerbosity() >= VERBO_HI)

/*
 * Test controls definitions.
 */
#define SKIPTEST  1 /* Skip this test */
#define ONLYTEST  2 /* Do only this test */
#define BEGINTEST 3 /* Skip all tests before this test */

/*
 * This contains the filename prefix specified as command line option for
 * the parallel test files.
 */
H5TEST_DLLVAR char *paraprefix;
#ifdef H5_HAVE_PARALLEL
H5TEST_DLLVAR MPI_Info h5_io_info_g; /* MPI INFO object for IO */
#endif

/*
 * Print the current location on the standard output stream.
 */
#define AT() HDprintf("   at %s:%d in %s()...\n", __FILE__, __LINE__, FUNC);

/*
 * The name of the test is printed by saying TESTING("something") which will
 * result in the string `Testing something' being flushed to standard output.
 * If a test passes, fails, or is skipped then the PASSED(), H5_FAILED(), or
 * SKIPPED() macro should be called.  After H5_FAILED() or SKIPPED() the caller
 * should print additional information to stdout indented by at least four
 * spaces.  If the h5_errors() is used for automatic error handling then
 * the H5_FAILED() macro is invoked automatically when an API function fails.
 */
#define TESTING(WHAT)                                                                                        \
    {                                                                                                        \
        HDprintf("Testing %-62s", WHAT);                                                                     \
        HDfflush(stdout);                                                                                    \
    }
#define TESTING_2(WHAT)                                                                                      \
    {                                                                                                        \
        HDprintf("  Testing %-60s", WHAT);                                                                   \
        HDfflush(stdout);                                                                                    \
    }
#define PASSED()                                                                                             \
    do {                                                                                                     \
        HDputs(" PASSED");                                                                                   \
        HDfflush(stdout);                                                                                    \
    } while (0)
#define H5_FAILED()                                                                                          \
    {                                                                                                        \
        HDputs("*FAILED*");                                                                                  \
        HDfflush(stdout);                                                                                    \
    }
#define H5_WARNING()                                                                                         \
    {                                                                                                        \
        HDputs("*WARNING*");                                                                                 \
        HDfflush(stdout);                                                                                    \
    }
#define SKIPPED()                                                                                            \
    {                                                                                                        \
        HDputs(" -SKIP-");                                                                                   \
        HDfflush(stdout);                                                                                    \
    }
#define PUTS_ERROR(s)                                                                                        \
    {                                                                                                        \
        HDputs(s);                                                                                           \
        AT();                                                                                                \
        goto error;                                                                                          \
    }
#define TEST_ERROR                                                                                           \
    {                                                                                                        \
        H5_FAILED();                                                                                         \
        AT();                                                                                                \
        goto error;                                                                                          \
    }
#define STACK_ERROR                                                                                          \
    {                                                                                                        \
        H5Eprint2(H5E_DEFAULT, stdout);                                                                      \
        goto error;                                                                                          \
    }
#define FAIL_STACK_ERROR                                                                                     \
    {                                                                                                        \
        H5_FAILED();                                                                                         \
        AT();                                                                                                \
        H5Eprint2(H5E_DEFAULT, stdout);                                                                      \
        goto error;                                                                                          \
    }
#define FAIL_PUTS_ERROR(s)                                                                                   \
    {                                                                                                        \
        H5_FAILED();                                                                                         \
        AT();                                                                                                \
        HDputs(s);                                                                                           \
        goto error;                                                                                          \
    }

/*
 * Alarm definitions to wait up (terminate) a test that runs too long.
 */
#define H5_ALARM_SEC 1200 /* default is 20 minutes */
#define ALARM_ON     TestAlarmOn()
#define ALARM_OFF    HDalarm(0)

/* Flags for h5_fileaccess_flags() */
#define H5_FILEACCESS_VFD    0x01
#define H5_FILEACCESS_LIBVER 0x02

/* Macros to create and fill 2D arrays with a single heap allocation.
 * These can be used to replace large stack and global arrays which raise
 * warnings.
 *
 * The macros make a single heap allocation large enough to hold all the
 * pointers and the data elements. The first part of the allocation holds
 * the pointers, and the second part holds the data as a contiguous block
 * in row-major order.
 *
 * To pass the data block to calls like H5Dread(), pass a pointer to the
 * first array element as the data pointer (e.g., array[0] in a 2D array).
 *
 * The fill macro just fills the array with an increasing count value.
 *
 * Usage:
 *
 * int **array;
 *
 * H5TEST_ALLOCATE_2D_ARRAY(array, int, 5, 10);
 *
 * H5TEST_FILL_2D_ARRAY(array, int, 5, 10);
 *
 * (do stuff)
 *
 * HDfree(array);
 */
#define H5TEST_ALLOCATE_2D_ARRAY(ARR, TYPE, DIMS_I, DIMS_J)                                                  \
    do {                                                                                                     \
        /* Prefix with h5taa to avoid shadow warnings */                                                     \
        size_t h5taa_pointers_size = 0;                                                                      \
        size_t h5taa_data_size     = 0;                                                                      \
        int    h5taa_i;                                                                                      \
                                                                                                             \
        h5taa_pointers_size = (DIMS_I) * sizeof(TYPE *);                                                     \
        h5taa_data_size     = (DIMS_I) * (DIMS_J) * sizeof(TYPE);                                            \
                                                                                                             \
        ARR = (TYPE **)HDmalloc(h5taa_pointers_size + h5taa_data_size);                                      \
                                                                                                             \
        ARR[0] = (TYPE *)(ARR + (DIMS_I));                                                                   \
                                                                                                             \
        for (h5taa_i = 1; h5taa_i < (DIMS_I); h5taa_i++)                                                     \
            ARR[h5taa_i] = ARR[h5taa_i - 1] + (DIMS_J);                                                      \
    } while (0)

#define H5TEST_FILL_2D_ARRAY(ARR, TYPE, DIMS_I, DIMS_J)                                                      \
    do {                                                                                                     \
        /* Prefix with h5tfa to avoid shadow warnings */                                                     \
        int  h5tfa_i     = 0;                                                                                \
        int  h5tfa_j     = 0;                                                                                \
        TYPE h5tfa_count = 0;                                                                                \
                                                                                                             \
        for (h5tfa_i = 0; h5tfa_i < (DIMS_I); h5tfa_i++)                                                     \
            for (h5tfa_j = 0; h5tfa_j < (DIMS_J); h5tfa_j++) {                                               \
                ARR[h5tfa_i][h5tfa_j] = h5tfa_count;                                                         \
                h5tfa_count++;                                                                               \
            }                                                                                                \
    } while (0)

#ifdef __cplusplus
extern "C" {
#endif

/* Generally useful testing routines */
H5TEST_DLL void        h5_clean_files(const char *base_name[], hid_t fapl);
H5TEST_DLL int         h5_cleanup(const char *base_name[], hid_t fapl);
H5TEST_DLL char *      h5_fixname(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL char *      h5_fixname_superblock(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL char *      h5_fixname_no_suffix(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL char *      h5_fixname_printf(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL hid_t       h5_fileaccess(void);
H5TEST_DLL hid_t       h5_fileaccess_flags(unsigned flags);
H5TEST_DLL void        h5_no_hwconv(void);
H5TEST_DLL const char *h5_rmprefix(const char *filename);
H5TEST_DLL void        h5_reset(void);
H5TEST_DLL void        h5_restore_err(void);
H5TEST_DLL void        h5_show_hostname(void);
H5TEST_DLL h5_stat_size_t h5_get_file_size(const char *filename, hid_t fapl);
H5TEST_DLL int            print_func(const char *format, ...);
H5TEST_DLL int            h5_make_local_copy(const char *origfilename, const char *local_copy_name);
H5TEST_DLL herr_t         h5_verify_cached_stabs(const char *base_name[], hid_t fapl);
H5TEST_DLL H5FD_class_t *h5_get_dummy_vfd_class(void);
H5TEST_DLL H5VL_class_t *h5_get_dummy_vol_class(void);
H5TEST_DLL const char *  h5_get_version_string(H5F_libver_t libver);
H5TEST_DLL int           h5_compare_file_bytes(char *fname1, char *fname2);
H5TEST_DLL int           h5_duplicate_file_by_bytes(const char *orig, const char *dest);
H5TEST_DLL herr_t        h5_check_if_file_locking_enabled(hbool_t *are_enabled);

/* Functions that will replace components of a FAPL */
H5TEST_DLL herr_t h5_get_vfd_fapl(hid_t fapl_id);
H5TEST_DLL herr_t h5_get_libver_fapl(hid_t fapl_id);

/* h5_clean_files() replacements */
H5TEST_DLL void h5_delete_test_file(const char *base_name, hid_t fapl);
H5TEST_DLL void h5_delete_all_test_files(const char *base_name[], hid_t fapl);

/* h5_reset() replacement */
H5TEST_DLL void h5_test_init(void);

/* h5_cleanup() replacement */
H5TEST_DLL void h5_test_shutdown(void);

/* Routines for operating on the list of tests (for the "all in one" tests) */
H5TEST_DLL void        TestUsage(void);
H5TEST_DLL void        AddTest(const char *TheName, void (*TheCall)(void), void (*Cleanup)(void),
                               const char *TheDescr, const void *Parameters);
H5TEST_DLL void        TestInfo(const char *ProgName);
H5TEST_DLL void        TestParseCmdLine(int argc, char *argv[]);
H5TEST_DLL void        PerformTests(void);
H5TEST_DLL void        TestSummary(void);
H5TEST_DLL void        TestCleanup(void);
H5TEST_DLL void        TestShutdown(void);
H5TEST_DLL void        TestInit(const char *ProgName, void (*private_usage)(void),
                                int (*private_parser)(int ac, char *av[]));
H5TEST_DLL int         GetTestVerbosity(void);
H5TEST_DLL int         SetTestVerbosity(int newval);
H5TEST_DLL int         GetTestSummary(void);
H5TEST_DLL int         GetTestCleanup(void);
H5TEST_DLL int         SetTestNoCleanup(void);
H5TEST_DLL int         GetTestExpress(void);
H5TEST_DLL int         SetTestExpress(int newval);
H5TEST_DLL void        ParseTestVerbosity(char *argv);
H5TEST_DLL int         GetTestNumErrs(void);
H5TEST_DLL void        IncTestNumErrs(void);
H5TEST_DLL const void *GetTestParameters(void);
H5TEST_DLL int         TestErrPrintf(const char *format, ...) H5_ATTR_FORMAT(printf, 1, 2);
H5TEST_DLL void        SetTest(const char *testname, int action);
H5TEST_DLL void        TestAlarmOn(void);
H5TEST_DLL void        TestAlarmOff(void);

#ifdef H5_HAVE_FILTER_SZIP
H5TEST_DLL int h5_szip_can_encode(void);
#endif /* H5_HAVE_FILTER_SZIP */

#ifdef H5_HAVE_PARALLEL
H5TEST_DLL int   h5_set_info_object(void);
H5TEST_DLL void  h5_dump_info_object(MPI_Info info);
H5TEST_DLL char *getenv_all(MPI_Comm comm, int root, const char *name);
#endif

/* Extern global variables */
H5TEST_DLLVAR int TestVerbosity;

H5TEST_DLL void   h5_send_message(const char *file, const char *arg1, const char *arg2);
H5TEST_DLL herr_t h5_wait_message(const char *file);

#ifdef __cplusplus
}
#endif
#endif