mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-11-27 02:10:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
9bdd63ada4
hdf5/test/tfile.c
Robb Matzke cc89b8a605 [svn-r1572] Changes since 19990810 
----------------------

./MANIFEST
./src/H5FDmulti.c		[NEW]
./src/H5FDmulti.h		[NEW]
./src/Makefile.in
./src/hdf5.h
	The split driver was reimplemented as a more general "multi"
	driver which is capable of splitting data into multiple files
	like the family driver except the partioning is done by memory
	usage type instead of address. The H5Pset_fapl_split()
	function just calls H5Pset_fapl_multi() with arguments which
	prepare to split the address space into two files: meta and
	raw data.

	This is the first version. I plan to allow the open() call to
	relax a bit which would allow one to open an hdf5 file when
	only the meta-data file is present. This would allow a very
	large file to be split and stored on tape and the relatively
	small meta file to be mirrored on disk to allow limited
	browsing of the file (any request for raw data would fail).

./src/H5private.h
./src/H5F.c
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
	Added the ability for a file driver to store information in
	the superblock which would be needed if the file were opened
	again later for reading.  The format is driver-defined which
	allows users to extend it however they like.

./doc/html/H5.format.html
	Added information about the new driver information block of
	the superblock. This is where file drivers store information
	they need in order to reopen the file later.


./src/H5F.c
./src/H5Fprivate.h
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5Fistore.c
./src/H5R.c
	The file access properties and the file access property list
	were decoupled, which allows the property list to more cleanly
	contain properties for various levels of the file and which
	allows the property list to be modified more cleanly when
	opening files.

./src/H5.c
./src/H5FDpublic.h
	Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never
	used.

./src/H5D.c
	Changed the way we detect the MPIO driver in all these special
	cases.

./src/H5F.c
./src/H5Rpublic.h
./test/tfile.c
	The default file sizeof(offset) was changed to be a function
	of haddr_t instead of hsize_t.

	THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER
	CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES!

./src/H5F.c
	Fixed an uninitialized memory access bug in file closing
	related to the VFL.

./src/H5T.c
./src/H5Tpublic.h
	Added an H5T_NATIVE_HADDR predefined datatype which
	corresponds to the `haddr_t' type.

./test/Makefile.in
	Reformatted long lines.

./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
	Removed the H5F_ACC_DEBUG flag from file creation/open calls.

./test/big.c
	Plugged a memory leak.

./test/h5test.c
	Added support for the `multi' driver.

	Removed #warning about not having the stdio driver. Plans are
	to not implement it since the sec2 driver serves the same
	purpose and testing didn't show any difference in execution
	times between the two.
1999-08-17 14:12:59 -05:00

341 lines
10 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/****************************************************************************
* NCSA HDF *
* Software Development Group *
* National Center for Supercomputing Applications *
* University of Illinois at Urbana-Champaign *
* 605 E. Springfield, Champaign IL 61820 *
* *
* For conditions of distribution and use, see the accompanying *
* hdf/COPYING file. *
* *
****************************************************************************/
#ifdef RCSID
static char RcsId[] = "$Revision$";
#endif
/* $Id$ */
/***********************************************************
*
* Test program: tfile
*
* Test the low-level file I/O features.
*
*************************************************************/
#include <testhdf5.h>
#include <H5private.h>
#include <H5Bprivate.h>
#include <H5Pprivate.h>
#define F1_USERBLOCK_SIZE (hsize_t)0
#define F1_OFFSET_SIZE sizeof(haddr_t)
#define F1_LENGTH_SIZE sizeof(hsize_t)
#define F1_SYM_LEAF_K 4
#define F1_SYM_INTERN_K 16
#define FILE1 "tfile1.h5"
#define F2_USERBLOCK_SIZE (hsize_t)512
#define F2_OFFSET_SIZE 8
#define F2_LENGTH_SIZE 8
#define F2_SYM_LEAF_K 8
#define F2_SYM_INTERN_K 32
#define FILE2 "tfile2.h5"
#define F3_USERBLOCK_SIZE (hsize_t)0
#define F3_OFFSET_SIZE F2_OFFSET_SIZE
#define F3_LENGTH_SIZE F2_LENGTH_SIZE
#define F3_SYM_LEAF_K F2_SYM_LEAF_K
#define F3_SYM_INTERN_K F2_SYM_INTERN_K
#define FILE3 "tfile3.h5"
/****************************************************************
**
** test_file_create(): Low-level file creation I/O test routine.
**
****************************************************************/
static void
test_file_create(void)
{
hid_t fid1, fid2, fid3; /* HDF5 File IDs */
hid_t tmpl1, tmpl2; /*file creation templates */
hsize_t ublock; /*sizeof userblock */
size_t parm; /*file-creation parameters */
size_t parm2; /*file-creation parameters */
int iparm, iparm2;
herr_t ret; /*generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Low-Level File Creation I/O\n"));
/* Test create with various sequences of H5F_ACC_EXCL and */
/* H5F_ACC_TRUNC flags */
/* Create with H5F_ACC_EXCL */
/* First ensure the file does not exist */
remove(FILE1);
fid1 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fcreate");
/*
* try to create the same file with H5F_ACC_TRUNC. This should fail
* because fid1 is the same file and is currently open.
*/
fid2 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid2, FAIL, "H5Fcreate");
/* Close all files */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
ret = H5Fclose(fid2);
VERIFY(ret, FAIL, "H5Fclose"); /*file should already be closed*/
/*
* Try again with H5F_ACC_EXCL. This should fail because the file already
* exists from the previous steps.
*/
fid1 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid1, FAIL, "H5Fcreate");
/* Test create with H5F_ACC_TRUNC. This will truncate the existing file. */
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fcreate");
/*
* Try to truncate first file again. This should fail because fid1 is the
* same file and is currently open.
*/
fid2 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid2, FAIL, "H5Fcreate");
/*
* Try with H5F_ACC_EXCL. This should fail too because the file already
* exists.
*/
fid2 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid2, FAIL, "H5Fcreate");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid1);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F1_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F1_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F1_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F1_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F1_SYM_LEAF_K, "H5Pget_sym_k");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
#ifdef LATER
/* Double-check that the atom has been vaporized */
ret = H5Pclose(tmpl1);
VERIFY(ret, FAIL, "H5Pclose");
#endif
/* Create a new file with a non-standard file-creation template */
tmpl1 = H5Pcreate(H5P_FILE_CREATE);
CHECK(tmpl1, FAIL, "H5Pnew");
/* Set the new file-creation parameters */
ret = H5Pset_userblock(tmpl1, F2_USERBLOCK_SIZE);
CHECK(ret, FAIL, "H5Pset_userblock");
ret = H5Pset_sizes(tmpl1, F2_OFFSET_SIZE, F2_LENGTH_SIZE);
CHECK(ret, FAIL, "H5Pset_sizes");
ret = H5Pset_sym_k(tmpl1, F2_SYM_INTERN_K, F2_SYM_LEAF_K);
CHECK(ret, FAIL, "H5Pset_sym_k");
/*
* Try to create second file, with non-standard file-creation template
* params.
*/
fid2 = H5Fcreate(FILE2, H5F_ACC_TRUNC, tmpl1, H5P_DEFAULT);
CHECK(fid2, FAIL, "H5Fcreate");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid2);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F2_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F2_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F2_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F2_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F2_SYM_LEAF_K, "H5Pget_sym_k");
/* Clone the file-creation template */
tmpl2 = H5Pcopy(tmpl1);
CHECK(tmpl2, FAIL, "H5Pcopy");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Set the new file-creation parameter */
ret = H5Pset_userblock(tmpl2, F3_USERBLOCK_SIZE);
CHECK(ret, FAIL, "H5Pset_userblock");
/*
* Try to create second file, with non-standard file-creation template
* params
*/
fid3 = H5Fcreate(FILE3, H5F_ACC_TRUNC, tmpl2, H5P_DEFAULT);
CHECK(fid3, FAIL, "H5Fcreate");
/* Release file-creation template */
ret = H5Pclose(tmpl2);
CHECK(ret, FAIL, "H5Pclose");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid3);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F3_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F3_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F3_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F3_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F3_SYM_LEAF_K, "H5Pget_sym_k");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Close first file */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second file */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
/* Close third file */
ret = H5Fclose(fid3);
CHECK(ret, FAIL, "H5Fclose");
} /* test_file_create() */
/****************************************************************
**
** test_file_open(): Low-level file open I/O test routine.
**
****************************************************************/
static void
test_file_open(void)
{
hid_t fid1; /*HDF5 File IDs */
hid_t tmpl1; /*file creation templates */
hsize_t ublock; /*sizeof user block */
size_t parm; /*file-creation parameters */
size_t parm2; /*file-creation parameters */
int iparm, iparm2;
herr_t ret; /*generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Low-Level File Opening I/O\n"));
/* Open first file */
fid1 = H5Fopen(FILE2, H5F_ACC_RDWR, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fopen");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid1);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F2_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F2_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F2_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F2_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F2_SYM_LEAF_K, "H5Pget_sym_k");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Close first file */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
} /* test_file_open() */
/****************************************************************
**
** test_file(): Main low-level file I/O test routine.
**
****************************************************************/
void
test_file(void)
{
/* Output message about test being performed */
MESSAGE(5, ("Testing Low-Level File I/O\n"));
test_file_create(); /* Test file creation (also creation templates) */
test_file_open(); /* Test file opening */
} /* test_file() */
/*-------------------------------------------------------------------------
* Function: cleanup_file
*
* Purpose: Cleanup temporary test files
*
* Return: none
*
* Programmer: Albert Cheng
* July 2, 1998
*
* Modifications:
*
*-------------------------------------------------------------------------
*/
void
cleanup_file(void)
{
remove(FILE1);
remove(FILE2);
remove(FILE3);
}
Reference in New Issue View Git Blame Copy Permalink