hdf5/test/tfile.c
Quincey Koziol 932101bb80 [svn-r7201] Purpose:
Code cleanup

Description:
    Finish converting the B-tree 'K' values to use unsigned integers, rather
than signed ones, since negative amounts of entries in a B-tree node aren't
meaningful.

Platforms tested:
    FreeBSD 4.8 (sleipnir)
    h5committest
2003-07-10 14:39:04 -05:00

954 lines
30 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
* the files COPYING and Copyright.html. COPYING can be found at the root *
* of the source code distribution tree; Copyright.html can be found at the *
* root level of an installed copy of the electronic HDF5 document set and *
* is linked from the top-level documents page. It can also be found at *
* http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have *
* access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/* $Id$ */
/***********************************************************
*
* Test program: tfile
*
* Test the low-level file I/O features.
*
*************************************************************/
#include "hdf5.h"
#include "testhdf5.h"
#include "H5Bprivate.h"
#include "H5Pprivate.h"
#define F1_USERBLOCK_SIZE (hsize_t)0
#define F1_OFFSET_SIZE sizeof(haddr_t)
#define F1_LENGTH_SIZE sizeof(hsize_t)
#define F1_SYM_LEAF_K 4
#define F1_SYM_INTERN_K 16
#define FILE1 "tfile1.h5"
#define F2_USERBLOCK_SIZE (hsize_t)512
#define F2_OFFSET_SIZE 8
#define F2_LENGTH_SIZE 8
#define F2_SYM_LEAF_K 8
#define F2_SYM_INTERN_K 32
#define F2_RANK 2
#define F2_DIM0 4
#define F2_DIM1 6
#define F2_DSET "dset"
#define FILE2 "tfile2.h5"
#define F3_USERBLOCK_SIZE (hsize_t)0
#define F3_OFFSET_SIZE F2_OFFSET_SIZE
#define F3_LENGTH_SIZE F2_LENGTH_SIZE
#define F3_SYM_LEAF_K F2_SYM_LEAF_K
#define F3_SYM_INTERN_K F2_SYM_INTERN_K
#define FILE3 "tfile3.h5"
#define OBJ_ID_COUNT_0 0
#define OBJ_ID_COUNT_1 1
#define OBJ_ID_COUNT_2 2
#define OBJ_ID_COUNT_3 3
#define OBJ_ID_COUNT_4 4
#define OBJ_ID_COUNT_6 6
#define OBJ_ID_COUNT_8 8
static void
create_objects(hid_t, hid_t, hid_t *, hid_t *, hid_t *, hid_t *);
static void
test_obj_count_and_id(hid_t, hid_t, hid_t, hid_t, hid_t, hid_t);
/****************************************************************
**
** test_file_create(): Low-level file creation I/O test routine.
**
****************************************************************/
static void
test_file_create(void)
{
hid_t fid1, fid2, fid3; /* HDF5 File IDs */
hid_t tmpl1, tmpl2; /*file creation templates */
hsize_t ublock; /*sizeof userblock */
size_t parm; /*file-creation parameters */
size_t parm2; /*file-creation parameters */
#ifdef H5_WANT_H5_V1_6_COMPAT
int iparm;
#else /* H5_WANT_H5_V1_6_COMPAT */
unsigned iparm;
#endif /* H5_WANT_H5_V1_6_COMPAT */
unsigned iparm2;
herr_t ret; /*generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Low-Level File Creation I/O\n"));
/* Test create with various sequences of H5F_ACC_EXCL and */
/* H5F_ACC_TRUNC flags */
/* Create with H5F_ACC_EXCL */
/* First ensure the file does not exist */
remove(FILE1);
fid1 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fcreate");
/*
* try to create the same file with H5F_ACC_TRUNC. This should fail
* because fid1 is the same file and is currently open.
*/
fid2 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid2, FAIL, "H5Fcreate");
/* Close all files */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
ret = H5Fclose(fid2);
VERIFY(ret, FAIL, "H5Fclose"); /*file should not have been open */
/*
* Try again with H5F_ACC_EXCL. This should fail because the file already
* exists from the previous steps.
*/
fid1 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid1, FAIL, "H5Fcreate");
/* Test create with H5F_ACC_TRUNC. This will truncate the existing file. */
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fcreate");
/*
* Try to truncate first file again. This should fail because fid1 is the
* same file and is currently open.
*/
fid2 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid2, FAIL, "H5Fcreate");
/*
* Try with H5F_ACC_EXCL. This should fail too because the file already
* exists.
*/
fid2 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT);
VERIFY(fid2, FAIL, "H5Fcreate");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid1);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F1_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F1_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F1_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F1_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F1_SYM_LEAF_K, "H5Pget_sym_k");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
#ifdef LATER
/* Double-check that the atom has been vaporized */
ret = H5Pclose(tmpl1);
VERIFY(ret, FAIL, "H5Pclose");
#endif
/* Create a new file with a non-standard file-creation template */
tmpl1 = H5Pcreate(H5P_FILE_CREATE);
CHECK(tmpl1, FAIL, "H5Pnew");
/* Set the new file-creation parameters */
ret = H5Pset_userblock(tmpl1, F2_USERBLOCK_SIZE);
CHECK(ret, FAIL, "H5Pset_userblock");
ret = H5Pset_sizes(tmpl1, F2_OFFSET_SIZE, F2_LENGTH_SIZE);
CHECK(ret, FAIL, "H5Pset_sizes");
ret = H5Pset_sym_k(tmpl1, F2_SYM_INTERN_K, F2_SYM_LEAF_K);
CHECK(ret, FAIL, "H5Pset_sym_k");
/*
* Try to create second file, with non-standard file-creation template
* params.
*/
fid2 = H5Fcreate(FILE2, H5F_ACC_TRUNC, tmpl1, H5P_DEFAULT);
CHECK(fid2, FAIL, "H5Fcreate");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Make certain we can create a dataset properly in the file with the userblock */
{
hid_t dataset_id, dataspace_id; /* identifiers */
hsize_t dims[F2_RANK];
int data[F2_DIM0][F2_DIM1];
unsigned i,j;
/* Create the data space for the dataset. */
dims[0] = F2_DIM0;
dims[1] = F2_DIM1;
dataspace_id = H5Screate_simple(F2_RANK, dims, NULL);
CHECK(dataspace_id, FAIL, "H5Screate_simple");
/* Create the dataset. */
dataset_id = H5Dcreate(fid2, F2_DSET, H5T_NATIVE_INT, dataspace_id, H5P_DEFAULT);
CHECK(dataset_id, FAIL, "H5Dcreate");
for(i=0; i<F2_DIM0; i++)
for(j=0; j<F2_DIM1; j++)
data[i][j]=i*10+j;
/* Write data to the new dataset */
ret = H5Dwrite(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, data);
CHECK(ret, FAIL, "H5Dwrite");
/* End access to the dataset and release resources used by it. */
ret = H5Dclose(dataset_id);
CHECK(ret, FAIL, "H5Dclose");
/* Terminate access to the data space. */
ret = H5Sclose(dataspace_id);
CHECK(ret, FAIL, "H5Sclose");
}
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid2);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F2_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F2_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F2_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F2_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F2_SYM_LEAF_K, "H5Pget_sym_k");
/* Clone the file-creation template */
tmpl2 = H5Pcopy(tmpl1);
CHECK(tmpl2, FAIL, "H5Pcopy");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Set the new file-creation parameter */
ret = H5Pset_userblock(tmpl2, F3_USERBLOCK_SIZE);
CHECK(ret, FAIL, "H5Pset_userblock");
/*
* Try to create second file, with non-standard file-creation template
* params
*/
fid3 = H5Fcreate(FILE3, H5F_ACC_TRUNC, tmpl2, H5P_DEFAULT);
CHECK(fid3, FAIL, "H5Fcreate");
/* Release file-creation template */
ret = H5Pclose(tmpl2);
CHECK(ret, FAIL, "H5Pclose");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid3);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F3_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F3_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F3_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F3_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F3_SYM_LEAF_K, "H5Pget_sym_k");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Close first file */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second file */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
/* Close third file */
ret = H5Fclose(fid3);
CHECK(ret, FAIL, "H5Fclose");
} /* test_file_create() */
/****************************************************************
**
** test_file_open(): Low-level file open I/O test routine.
**
****************************************************************/
static void
test_file_open(void)
{
hid_t fid1, fid2; /*HDF5 File IDs */
hid_t did; /*dataset ID */
hid_t fapl_id; /*file access property list ID */
hid_t tmpl1; /*file creation templates */
hsize_t ublock; /*sizeof user block */
size_t parm; /*file-creation parameters */
size_t parm2; /*file-creation parameters */
#ifdef H5_WANT_H5_V1_6_COMPAT
int iparm;
#else /* H5_WANT_H5_V1_6_COMPAT */
unsigned iparm;
#endif /* H5_WANT_H5_V1_6_COMPAT */
unsigned iparm2;
herr_t ret; /*generic return value */
/*
* Test single file open
*/
/* Output message about test being performed */
MESSAGE(5, ("Testing Low-Level File Opening I/O\n"));
/* Open first file */
fid1 = H5Fopen(FILE2, H5F_ACC_RDWR, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fopen");
/* Get the file-creation template */
tmpl1 = H5Fget_create_plist(fid1);
CHECK(tmpl1, FAIL, "H5Fget_create_plist");
/* Get the file-creation parameters */
ret = H5Pget_userblock(tmpl1, &ublock);
CHECK(ret, FAIL, "H5Pget_userblock");
VERIFY(ublock, F2_USERBLOCK_SIZE, "H5Pget_userblock");
ret = H5Pget_sizes(tmpl1, &parm, &parm2);
CHECK(ret, FAIL, "H5Pget_sizes");
VERIFY(parm, F2_OFFSET_SIZE, "H5Pget_sizes");
VERIFY(parm2, F2_LENGTH_SIZE, "H5Pget_sizes");
ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2);
CHECK(ret, FAIL, "H5Pget_sym_k");
VERIFY(iparm, F2_SYM_INTERN_K, "H5Pget_sym_k");
VERIFY(iparm2, F2_SYM_LEAF_K, "H5Pget_sym_k");
/* Release file-creation template */
ret = H5Pclose(tmpl1);
CHECK(ret, FAIL, "H5Pclose");
/* Close first file */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/*
* Test two file opens: one is opened H5F_ACC_RDONLY and H5F_CLOSE_WEAK.
* It's closed with an object left open. Then another is opened
* H5F_ACC_RDWR, which should fail.
*/
/* Output message about test being performed */
MESSAGE(5, ("Testing 2 File Openings\n"));
/* Create file access property list */
fapl_id = H5Pcreate(H5P_FILE_ACCESS);
CHECK(fapl_id, FAIL, "H5Pcreate");
/* Set file close mode to H5F_CLOSE_WEAK */
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* Open file for first time */
fid1 = H5Fopen(FILE2, H5F_ACC_RDONLY, fapl_id);
CHECK(fid1, FAIL, "H5Fopen");
/* Open dataset */
did = H5Dopen(fid1, F2_DSET);
CHECK(did, FAIL, "H5Dopen");
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Open file for second time, which should fail. */
fid2 = H5Fopen(FILE2, H5F_ACC_RDWR, fapl_id);
VERIFY(fid2, FAIL, "H5Fopen");
/* Close dataset from first open */
ret = H5Dclose(did);
CHECK(ret, FAIL, "H5Dclose");
} /* test_file_open() */
/****************************************************************
**
** test_file_close(): low-level file close test routine.
** It mainly tests behavior with close degree.
**
*****************************************************************/
static void
test_file_close(void)
{
hid_t fid1, fid2;
hid_t fapl_id, access_id;
hid_t dataset_id, group_id1, group_id2, group_id3;
H5F_close_degree_t fc_degree;
herr_t ret;
/* Test behavior while opening file multiple times with different
* file close degree value
*/
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fcreate");
fapl_id = H5Pcreate(H5P_FILE_ACCESS);
CHECK(fapl_id, FAIL, "H5Pcreate");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_STRONG);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
ret = H5Pget_fclose_degree(fapl_id, &fc_degree);
VERIFY(fc_degree, H5F_CLOSE_STRONG, "H5Pget_fclose_degree");
/* should fail */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
VERIFY(fid2, FAIL, "H5Fopen");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should succeed */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
CHECK(fid2, FAIL, "H5Fopen");
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
/* Test behavior while opening file multiple times with different file
* close degree
*/
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid1, FAIL, "H5Fcreate");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
ret = H5Pget_fclose_degree(fapl_id, &fc_degree);
VERIFY(fc_degree, H5F_CLOSE_WEAK, "H5Pget_fclose_degree");
/* should succeed */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
CHECK(fid2, FAIL, "H5Fopen");
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
/* Test behavior while opening file multiple times with file close
* degree STRONG */
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_STRONG);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id);
CHECK(fid1, FAIL, "H5Fcreate");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should fail */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
VERIFY(fid2, FAIL, "H5Fopen");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_STRONG);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should succeed */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
CHECK(fid2, FAIL, "H5Fopen");
/* Create a dataset and a group in each file open respectively */
create_objects(fid1, fid2, NULL, NULL, NULL, NULL);
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
/* Test behavior while opening file multiple times with file close
* degree SEMI */
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id);
CHECK(fid1, FAIL, "H5Fcreate");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should fail */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
VERIFY(fid2, FAIL, "H5Fopen");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should succeed */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
CHECK(fid2, FAIL, "H5Fopen");
/* Create a dataset and a group in each file open respectively */
create_objects(fid1, fid2, &dataset_id, &group_id1, &group_id2, &group_id3);
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open, should fail since it is SEMI and objects are
* still open. */
ret = H5Fclose(fid2);
VERIFY(ret, FAIL, "H5Fclose");
ret = H5Dclose(dataset_id);
CHECK(ret, FAIL, "H5Dclose");
ret = H5Gclose(group_id1);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id2);
CHECK(ret, FAIL, "H5Gclose");
/* Close second open, should fail since it is SEMI and one group ID is
* still open. */
ret = H5Fclose(fid2);
VERIFY(ret, FAIL, "H5Fclose");
ret = H5Gclose(group_id3);
CHECK(ret, FAIL, "H5Gclose");
/* Close second open again. Should succeed. */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
/* Test behavior while opening file multiple times with file close
* degree WEAK */
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id);
CHECK(fid1, FAIL, "H5Fcreate");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should fail */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
VERIFY(fid2, FAIL, "H5Fopen");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should succeed */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
CHECK(fid2, FAIL, "H5Fopen");
/* Create a dataset and a group in each file open respectively */
create_objects(fid1, fid2, &dataset_id, &group_id1, &group_id2, &group_id3);
/* Create more new files and test object count and ID list functions */
test_obj_count_and_id(fid1, fid2, dataset_id, group_id1,
group_id2, group_id3);
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open. File will be finally closed after all objects
* are closed. */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
ret = H5Dclose(dataset_id);
CHECK(ret, FAIL, "H5Dclose");
ret = H5Gclose(group_id1);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id2);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id3);
CHECK(ret, FAIL, "H5Gclose");
/* Test behavior while opening file multiple times with file close
* degree DEFAULT */
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id);
CHECK(fid1, FAIL, "H5Fcreate");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should fail */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
VERIFY(fid2, FAIL, "H5Fopen");
ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT);
CHECK(ret, FAIL, "H5Pset_fclose_degree");
/* should succeed */
fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id);
CHECK(fid2, FAIL, "H5Fopen");
/* Create a dataset and a group in each file open respectively */
create_objects(fid1, fid2, &dataset_id, &group_id1, &group_id2, &group_id3);
access_id = H5Fget_access_plist(fid1);
CHECK(access_id, FAIL, "H5Fget_access_plist");
ret= H5Pget_fclose_degree(access_id, &fc_degree);
CHECK(ret, FAIL, "H5Pget_fclose_degree");
switch(fc_degree) {
case H5F_CLOSE_STRONG:
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
break;
case H5F_CLOSE_SEMI:
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
ret = H5Dclose(dataset_id);
CHECK(ret, FAIL, "H5Dclose");
ret = H5Gclose(group_id1);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id2);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id3);
CHECK(ret, FAIL, "H5Gclose");
/* Close second open */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
break;
case H5F_CLOSE_WEAK:
/* Close first open */
ret = H5Fclose(fid1);
CHECK(ret, FAIL, "H5Fclose");
/* Close second open */
ret = H5Fclose(fid2);
CHECK(ret, FAIL, "H5Fclose");
ret = H5Dclose(dataset_id);
CHECK(ret, FAIL, "H5Dclose");
ret = H5Gclose(group_id1);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id2);
CHECK(ret, FAIL, "H5Gclose");
ret = H5Gclose(group_id3);
CHECK(ret, FAIL, "H5Gclose");
break;
default:
CHECK(fc_degree, H5F_CLOSE_DEFAULT, "H5Pget_fclose_degree");
break;
}
/* Close file access property list */
ret = H5Pclose(fapl_id);
CHECK(ret, FAIL, "H5Pclose");
ret = H5Pclose(access_id);
CHECK(ret, FAIL, "H5Pclose");
}
/****************************************************************
**
** create_objects(): routine called by test_file_close to create
** a dataset and a group in file.
**
****************************************************************/
static void
create_objects(hid_t fid1, hid_t fid2, hid_t *ret_did, hid_t *ret_gid1,
hid_t *ret_gid2, hid_t *ret_gid3)
{
int oid_count;
herr_t ret;
/* Check reference counts of file IDs and opened object IDs.
* The verification is hard-coded. If in any case, this testing
* is changed, remember to check this part and update the macros.
*/
{
oid_count = H5Fget_obj_count(fid1, H5F_OBJ_ALL);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_2, "H5Fget_obj_count");
oid_count = H5Fget_obj_count(fid1, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count");
oid_count = H5Fget_obj_count(fid2, H5F_OBJ_ALL);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_2, "H5Fget_obj_count");
oid_count = H5Fget_obj_count(fid2, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count");
}
/* create a dataset in the first file open */
{
hid_t dataset_id, dataspace_id; /* identifiers */
hsize_t dims[F2_RANK];
int data[F2_DIM0][F2_DIM1];
unsigned i,j;
/* Create the data space for the dataset. */
dims[0] = F2_DIM0;
dims[1] = F2_DIM1;
dataspace_id = H5Screate_simple(F2_RANK, dims, NULL);
CHECK(dataspace_id, FAIL, "H5Screate_simple");
/* Create the dataset. */
dataset_id = H5Dcreate(fid1, "/dset", H5T_NATIVE_INT, dataspace_id,
H5P_DEFAULT);
CHECK(dataset_id, FAIL, "H5Dcreate");
for(i=0; i<F2_DIM0; i++)
for(j=0; j<F2_DIM1; j++)
data[i][j]=i*10+j;
/* Write data to the new dataset */
ret = H5Dwrite(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
H5P_DEFAULT, data);
CHECK(ret, FAIL, "H5Dwrite");
if(ret_did != NULL)
*ret_did = dataset_id;
/* Terminate access to the data space. */
ret = H5Sclose(dataspace_id);
CHECK(ret, FAIL, "H5Sclose");
}
/* Create a group in the second file open */
{
hid_t gid1, gid2, gid3;
gid1 = H5Gcreate(fid2, "/group", 0);
CHECK(gid1, FAIL, "H5Gcreate");
if(ret_gid1 != NULL)
*ret_gid1 = gid1;
gid2 = H5Gopen(fid2, "/group");
CHECK(gid2, FAIL, "H5Gopen");
if(ret_gid2 != NULL)
*ret_gid2 = gid2;
gid3 = H5Gopen(fid2, "/group");
CHECK(gid3, FAIL, "H5Gopen");
if(ret_gid3 != NULL)
*ret_gid3 = gid3;
}
/* Check reference counts of file IDs and opened object IDs.
* The verification is hard-coded. If in any case, this testing
* is changed, remember to check this part and update the macros.
*/
{
oid_count = H5Fget_obj_count(fid1, H5F_OBJ_ALL);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_6, "H5Fget_obj_count");
oid_count = H5Fget_obj_count(fid1, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_4, "H5Fget_obj_count");
oid_count = H5Fget_obj_count(fid2, H5F_OBJ_ALL);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_6, "H5Fget_obj_count");
oid_count = H5Fget_obj_count(fid2, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_4, "H5Fget_obj_count");
}
}
/****************************************************************
**
** test_obj_count_and_id(): test object count and ID list functions.
**
****************************************************************/
static void
test_obj_count_and_id(hid_t fid1, hid_t fid2, hid_t did, hid_t gid1,
hid_t gid2, hid_t gid3)
{
hid_t fid3, fid4;
int oid_count;
herr_t ret;
/* Create two new files */
fid3 = H5Fcreate(FILE2, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid3, FAIL, "H5Fcreate");
fid4 = H5Fcreate(FILE3, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
CHECK(fid4, FAIL, "H5Fcreate");
/* test object count of all files IDs open */
oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_FILE);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_4, "H5Fget_obj_count");
/* test object count of all datasets open */
oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_DATASET);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_1, "H5Fget_obj_count");
/* test object count of all groups open */
oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_GROUP);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_3, "H5Fget_obj_count");
/* test object count of all named datatypes open */
oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_DATATYPE);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count");
/* test object count of all attributes open */
oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_ATTR);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count");
/* test object count of all objects currently open */
oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_ALL);
CHECK(oid_count, FAIL, "H5Fget_obj_count");
VERIFY(oid_count, OBJ_ID_COUNT_8, "H5Fget_obj_count");
{
hid_t *oid_list;
int i;
H5I_type_t id_type;
oid_list = (hid_t*)calloc((size_t)oid_count, sizeof(hid_t));
if(oid_list != NULL) {
ret = H5Fget_obj_ids(H5F_OBJ_ALL, H5F_OBJ_ALL, oid_count, oid_list);
CHECK(ret, FAIL, "H5Fget_obj_ids");
}
for(i=0; i<oid_count; i++) {
id_type = H5Iget_type(oid_list[i]);
switch(id_type) {
case H5I_FILE:
if(oid_list[i]!=fid1 && oid_list[i]!=fid2 &&
oid_list[i]!=fid3 && oid_list[i]!=fid4) {
ret = FAIL;
CHECK(ret, FAIL, "H5Fget_obj_ids");
}
break;
case H5I_GROUP:
if(oid_list[i]!=gid1 && oid_list[i]!=gid2 &&
oid_list[i]!=gid3) {
ret = FAIL;
CHECK(ret, FAIL, "H5Fget_obj_ids");
}
break;
case H5I_DATASET:
VERIFY(oid_list[i], did, "H5Fget_obj_ids");
break;
default:
ret = FAIL;
CHECK(ret, FAIL, "H5Fget_obj_ids");
}
}
free(oid_list);
}
/* close the two new files */
ret = H5Fclose(fid3);
CHECK(ret, FAIL, "H5Fclose");
ret = H5Fclose(fid4);
CHECK(ret, FAIL, "H5Fclose");
}
/****************************************************************
**
** test_file(): Main low-level file I/O test routine.
**
****************************************************************/
void
test_file(void)
{
/* Output message about test being performed */
MESSAGE(5, ("Testing Low-Level File I/O\n"));
test_file_create(); /* Test file creation(also creation templates)*/
test_file_open(); /* Test file opening */
#ifndef H5_NO_SHARED_WRITING
test_file_close(); /* Test file close behavior */
#endif /* H5_NO_SHARED_WRITING */
} /* test_file() */
/*-------------------------------------------------------------------------
* Function: cleanup_file
*
* Purpose: Cleanup temporary test files
*
* Return: none
*
* Programmer: Albert Cheng
* July 2, 1998
*
* Modifications:
*
*-------------------------------------------------------------------------
*/
void
cleanup_file(void)
{
remove(FILE1);
remove(FILE2);
remove(FILE3);
}