mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-11-27 02:10:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
8cd9d8349e
hdf5/tools/lib/h5tools.c
Dana Robinson c6097935d5 Separated VFD and VOL parameters in tools.
2020-04-20 17:38:45 -07:00

2199 lines
77 KiB
C
Raw Blame History

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by The HDF Group. *
* Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
* the COPYING file, which can be found at the root of the source code *
* distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. *
* If you do not have access to either file, you may request a copy from *
* help@hdfgroup.org. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*
* Purpose: A library for routines that are common
* amongst the various HDF5 tools.
*/
#include "h5tools.h"
#include "h5tools_dump.h"
#include "h5tools_ref.h"
#include "h5tools_utils.h"
#include "H5private.h"
#ifdef H5_TOOLS_DEBUG
/* global debug variables */
int H5tools_INDENT_g = 0;
#endif
/* global variables */
hid_t H5tools_ERR_STACK_g = H5I_INVALID_HID;
hid_t H5tools_ERR_CLS_g = H5I_INVALID_HID;
hid_t H5E_tools_g = H5I_INVALID_HID;
hid_t H5E_tools_min_id_g = H5I_INVALID_HID;
hid_t H5E_tools_min_info_id_g = H5I_INVALID_HID;
hid_t H5E_tools_min_dbg_id_g = H5I_INVALID_HID;
int compound_data;
FILE *rawattrstream = NULL; /* should initialize to stdout but gcc moans about it */
FILE *rawdatastream = NULL; /* should initialize to stdout but gcc moans about it */
FILE *rawinstream = NULL; /* should initialize to stdin but gcc moans about it */
FILE *rawoutstream = NULL; /* should initialize to stdout but gcc moans about it */
FILE *rawerrorstream = NULL; /* should initialize to stderr but gcc moans about it */
int bin_output; /* binary output */
int bin_form = 0; /* binary form, default NATIVE */
int region_output; /* region output */
int oid_output; /* oid output */
int data_output; /* data output */
int attr_data_output; /* attribute data output */
unsigned packed_bits_num; /* number of packed bits to display */
unsigned packed_data_offset; /* offset of packed bits to display */
unsigned packed_data_length; /* length of packed bits to display */
unsigned long long packed_data_mask; /* mask in which packed bits to display */
int enable_error_stack = 0; /* re-enable error stack; disable=0 enable=1 */
/* sort parameters */
H5_index_t sort_by = H5_INDEX_NAME; /* sort_by [creation_order | name] */
H5_iter_order_t sort_order = H5_ITER_INC; /* sort_order [ascending | descending] */
/* module-scoped variables */
static int h5tools_init_g; /* if h5tools lib has been initialized */
/* Names of VOL connectors */
const char *volnames[] = {
H5VL_NATIVE_NAME,
H5VL_PASSTHRU_NAME,
};
/* Names of VFDs. These names are always available so that
* the tools can emit special messages when a VFD is asked
* for by name but is not compiled into the library or is
* somehow otherwise not enabled.
*
*/
const char *drivernames[] = {
"sec2",
"direct",
"log",
"windows",
"stdio",
"core",
"family",
"split",
"multi",
"mpio",
"ros3",
"hdfs",
};
#define NUM_VOLS (sizeof(volnames) / sizeof(volnames[0]))
#define NUM_DRIVERS (sizeof(drivernames) / sizeof(drivernames[0]))
/*-------------------------------------------------------------------------
* Function: h5tools_init
*
* Purpose: This should be called before any other h5tools function is called.
* Effect of any h5tools function called before this has been called is
* undetermined.
*
* Return None
*-------------------------------------------------------------------------
*/
void
h5tools_init(void)
{
if (!h5tools_init_g) {
H5TOOLS_INIT_ERROR();
if (!rawattrstream)
rawattrstream = stdout;
if (!rawdatastream)
rawdatastream = stdout;
if (!rawinstream)
rawinstream = stdin;
if (!rawoutstream)
rawoutstream = stdout;
if (!rawerrorstream)
rawerrorstream = stderr;
h5tools_dump_init();
h5tools_init_g++;
}
}
/*-------------------------------------------------------------------------
* Function: h5tools_close
*
* Purpose: Close or release resources such as files opened by the library. This
* should be called after all other h5tools functions have been called.
* Effect of any h5tools function called after this has been called is
* undetermined.
*
* Return: None
*-------------------------------------------------------------------------
*/
void
h5tools_close(void)
{
H5E_auto2_t tools_func;
void *tools_edata;
if (h5tools_init_g) {
/* special case where only data is output to stdout */
if ((rawoutstream == NULL) && rawdatastream && (rawdatastream == stdout))
HDfprintf(rawdatastream, "\n");
H5Eget_auto2(H5tools_ERR_STACK_g, &tools_func, &tools_edata);
if (tools_func)
H5Eprint2(H5tools_ERR_STACK_g, rawerrorstream);
if (rawattrstream && rawattrstream != stdout) {
if (fclose(rawattrstream))
perror("closing rawattrstream");
else
rawattrstream = NULL;
}
if (rawdatastream && rawdatastream != stdout) {
if (fclose(rawdatastream))
perror("closing rawdatastream");
else
rawdatastream = NULL;
}
if (rawinstream && rawinstream != stdin) {
if (fclose(rawinstream))
perror("closing rawinstream");
else
rawinstream = NULL;
}
if (rawoutstream && rawoutstream != stdout) {
if (fclose(rawoutstream))
perror("closing rawoutstream");
else
rawoutstream = NULL;
}
if (rawerrorstream && rawerrorstream != stderr) {
if (fclose(rawerrorstream))
perror("closing rawerrorstream");
else
rawerrorstream = NULL;
}
/* Clean up the reference path table, if it's been used */
term_ref_path_table();
H5TOOLS_CLOSE_ERROR();
/* Shut down the library */
H5close();
h5tools_init_g = 0;
}
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_data_output_file
*
* Purpose: Open fname as the output file for dataset raw data.
* Set rawdatastream as its file stream.
*
* Return: 0 -- succeeded
* negative -- failed
*-------------------------------------------------------------------------
*/
int
h5tools_set_data_output_file(const char *fname, int is_bin)
{
int retvalue = FAIL;
FILE *f; /* temporary holding place for the stream pointer
* so that rawdatastream is changed only when succeeded */
if (rawdatastream && rawdatastream != stdout) {
if (HDfclose(rawdatastream))
HDperror("closing rawdatastream");
else
rawdatastream = NULL;
}
/* First check if filename is string "NULL" */
if (fname != NULL) {
/* binary output */
if (is_bin) {
if ((f = HDfopen(fname, "wb")) != NULL) {
rawdatastream = f;
retvalue = SUCCEED;
}
}
else {
if ((f = HDfopen(fname, "w")) != NULL) {
rawdatastream = f;
retvalue = SUCCEED;
}
}
}
else {
rawdatastream = NULL;
retvalue = SUCCEED;
}
return retvalue;
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_attr_output_file
*
* Purpose: Open fname as the output file for attribute raw data.
* Set rawattrstream as its file stream.
*
* Return: 0 -- succeeded
* negative -- failed
*-------------------------------------------------------------------------
*/
int
h5tools_set_attr_output_file(const char *fname, int is_bin)
{
int retvalue = FAIL;
FILE *f; /* temporary holding place for the stream pointer
* so that rawattrstream is changed only when succeeded */
if (rawattrstream && rawattrstream != stdout) {
if (HDfclose(rawattrstream))
HDperror("closing rawattrstream");
else
rawattrstream = NULL;
}
/* First check if filename is string "NULL" */
if (fname != NULL) {
/* binary output */
if (is_bin) {
if ((f = HDfopen(fname, "wb")) != NULL) {
rawattrstream = f;
retvalue = SUCCEED;
}
}
else {
if ((f = HDfopen(fname, "w")) != NULL) {
rawattrstream = f;
retvalue = SUCCEED;
}
}
}
else {
rawattrstream = NULL;
retvalue = SUCCEED;
}
return retvalue;
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_input_file
*
* Purpose: Open fname as the input file for raw input.
* Set rawinstream as its file stream.
*
* Return: 0 -- succeeded
* negative -- failed
*
*-------------------------------------------------------------------------
*/
int
h5tools_set_input_file(const char *fname, int is_bin)
{
int retvalue = FAIL;
FILE *f; /* temporary holding place for the stream pointer
* so that rawinstream is changed only when succeeded */
if (rawinstream && rawinstream != stdin) {
if (HDfclose(rawinstream))
HDperror("closing rawinstream");
else
rawinstream = NULL;
}
/* First check if filename is string "NULL" */
if (fname != NULL) {
/* binary output */
if (is_bin) {
if ((f = HDfopen(fname, "rb")) != NULL) {
rawinstream = f;
retvalue = SUCCEED;
}
}
else {
if ((f = HDfopen(fname, "r")) != NULL) {
rawinstream = f;
retvalue = SUCCEED;
}
}
}
else {
rawinstream = NULL;
retvalue = SUCCEED;
}
return retvalue;
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_output_file
*
* Purpose: Open fname as the output file for raw output.
* Set rawoutstream as its file stream.
*
* Return: 0 -- succeeded
* negative -- failed
*
*-------------------------------------------------------------------------
*/
int
h5tools_set_output_file(const char *fname, int is_bin)
{
int retvalue = FAIL;
FILE *f; /* temporary holding place for the stream pointer
* so that rawoutstream is changed only when succeeded */
if (rawoutstream && rawoutstream != stdout) {
if (HDfclose(rawoutstream))
HDperror("closing rawoutstream");
else
rawoutstream = NULL;
}
/* First check if filename is string "NULL" */
if (fname != NULL) {
/* binary output */
if (is_bin) {
if ((f = HDfopen(fname, "wb")) != NULL) {
rawoutstream = f;
retvalue = SUCCEED;
}
}
else {
if ((f = HDfopen(fname, "w")) != NULL) {
rawoutstream = f;
retvalue = SUCCEED;
}
}
}
else {
rawoutstream = NULL;
retvalue = SUCCEED;
}
return retvalue;
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_error_file
*
* Purpose: Open fname as the error output file for dataset raw error.
* Set rawerrorstream as its file stream.
*
* Return: 0 -- succeeded
* negative -- failed
*-------------------------------------------------------------------------
*/
int
h5tools_set_error_file(const char *fname, int is_bin)
{
int retvalue = FAIL;
FILE *f; /* temporary holding place for the stream pointer
* so that rawerrorstream is changed only when succeeded */
if (rawerrorstream && rawerrorstream != stderr) {
if (HDfclose(rawerrorstream))
HDperror("closing rawerrorstream");
else
rawerrorstream = NULL;
}
/* First check if filename is string "NULL" */
if (fname != NULL) {
/* binary output */
if (is_bin) {
if ((f = HDfopen(fname, "wb")) != NULL) {
rawerrorstream = f;
retvalue = SUCCEED;
}
}
else {
if ((f = HDfopen(fname, "w")) != NULL) {
rawerrorstream = f;
retvalue = SUCCEED;
}
}
}
else {
rawerrorstream = NULL;
retvalue = SUCCEED;
}
return retvalue;
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_fapl_vfd
*
* Purpose: Given a VFL driver name, sets the appropriate driver on the
* specified FAPL.
*
* Return: positive - succeeded
* negative - failed
*-------------------------------------------------------------------------
*/
static herr_t
h5tools_set_fapl_vfd(hid_t fapl_id, h5tools_vfd_info_t *vfd_info)
{
herr_t ret_value = SUCCEED;
/* Determine which driver the user wants to open the file with */
if (!HDstrcmp(vfd_info->name, drivernames[SEC2_VFD_IDX])) {
/* SEC2 Driver */
if (H5Pset_fapl_sec2(fapl_id) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_sec2 failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[DIRECT_VFD_IDX])) {
#ifdef H5_HAVE_DIRECT
/* Direct Driver */
if (H5Pset_fapl_direct(fapl_id, 1024, 4096, 8 * 4096) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_direct failed");
#else
H5TOOLS_GOTO_ERROR(FAIL, "Direct VFD is not enabled");
#endif
}
else if (!HDstrcmp(vfd_info->name, drivernames[LOG_VFD_IDX])) {
unsigned long long log_flags = H5FD_LOG_LOC_IO | H5FD_LOG_ALLOC;
/* Log Driver */
if (H5Pset_fapl_log(fapl_id, NULL, log_flags, (size_t) 0) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_log failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[WINDOWS_VFD_IDX])) {
#ifdef H5_HAVE_WINDOWS
/* There is no Windows VFD - use SEC2 */
if (H5Pset_fapl_sec2(fapl_id) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_sec2 failed");
#else
H5TOOLS_GOTO_ERROR(FAIL, "Windows VFD is not enabled");
#endif
}
else if (!HDstrcmp(vfd_info->name, drivernames[STDIO_VFD_IDX])) {
/* Stdio Driver */
if (H5Pset_fapl_stdio(fapl_id) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_stdio failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[CORE_VFD_IDX])) {
/* Core Driver */
if (H5Pset_fapl_core(fapl_id, (size_t) H5_MB, TRUE) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_core failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[FAMILY_VFD_IDX])) {
/* FAMILY Driver */
/* Set member size to be 0 to indicate the current first member size
* is the member size.
*/
if (H5Pset_fapl_family(fapl_id, (hsize_t) 0, H5P_DEFAULT) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_family failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[SPLIT_VFD_IDX])) {
/* SPLIT Driver */
if (H5Pset_fapl_split(fapl_id, "-m.h5", H5P_DEFAULT, "-r.h5", H5P_DEFAULT) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_split failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[MULTI_VFD_IDX])) {
/* MULTI Driver */
if (H5Pset_fapl_multi(fapl_id, NULL, NULL, NULL, NULL, TRUE) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_multi failed");
}
else if (!HDstrcmp(vfd_info->name, drivernames[MPIO_VFD_IDX])) {
#ifdef H5_HAVE_PARALLEL
int mpi_initialized, mpi_finalized;
/* MPI-I/O Driver */
/* check if MPI is available. */
MPI_Initialized(&mpi_initialized);
MPI_Finalized(&mpi_finalized);
if (mpi_initialized && !mpi_finalized) {
if (H5Pset_fapl_mpio(fapl_id, MPI_COMM_WORLD, MPI_INFO_NULL) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_mpio failed");
}
#else
H5TOOLS_GOTO_ERROR(FAIL, "MPI-I/O VFD is not enabled");
#endif /* H5_HAVE_PARALLEL */
}
else if (!HDstrcmp(vfd_info->name, drivernames[ROS3_VFD_IDX])) {
#ifdef H5_HAVE_ROS3_VFD
if (!vfd_info->info)
H5TOOLS_GOTO_ERROR(FAIL, "Read-only S3 VFD info is invalid");
if (H5Pset_fapl_ros3(fapl_id, (H5FD_ros3_fapl_t *)vfd_info->info) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_ros3() failed");
#else
H5TOOLS_GOTO_ERROR(FAIL, "Read-only S3 VFD is not enabled");
#endif
}
else if (!HDstrcmp(vfd_info->name, drivernames[HDFS_VFD_IDX])) {
#ifdef H5_HAVE_LIBHDFS
if (!vfd_info->info)
H5TOOLS_GOTO_ERROR(FAIL, "HDFS VFD info is invalid");
if (H5Pset_fapl_hdfs(fapl_id, (H5FD_hdfs_fapl_t *)vfd_info->info) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "H5Pset_fapl_hdfs() failed");
#else
H5TOOLS_GOTO_ERROR(FAIL, "The HDFS VFD is not enabled");
#endif
}
else
H5TOOLS_GOTO_ERROR(FAIL, "invalid VFD name");
done:
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: h5tools_set_fapl_vol
*
* Purpose: Given a VOL connector name or ID, sets the appropriate
* connector on the specified FAPL.
*
* Return: positive - succeeded
* negative - failed
*-------------------------------------------------------------------------
*/
static herr_t
h5tools_set_fapl_vol(hid_t fapl_id, h5tools_vol_info_t *vol_info)
{
htri_t connector_is_registered;
hid_t connector_id = H5I_INVALID_HID;
void *connector_info = NULL;
herr_t ret_value = SUCCEED;
switch (vol_info->type) {
case VOL_BY_NAME:
/* Retrieve VOL connector by name */
if ((connector_is_registered = H5VLis_connector_registered_by_name(vol_info->u.name)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't check if VOL connector is registered");
if (connector_is_registered) {
if ((connector_id = H5VLget_connector_id_by_name(vol_info->u.name)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't get VOL connector ID");
}
else {
/* Check for VOL connectors that ship with the library, then try
* registering by name if that fails.
*/
if (!HDstrcmp(vol_info->u.name, H5VL_NATIVE_NAME)) {
connector_id = H5VL_NATIVE;
}
else if (!HDstrcmp(vol_info->u.name, H5VL_PASSTHRU_NAME)) {
connector_id = H5VL_PASSTHRU;
}
else {
/* NOTE: Not being able to pass in a VIPL may be a limitation for some
* connectors.
*/
if ((connector_id = H5VLregister_connector_by_name(vol_info->u.name, H5P_DEFAULT)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't register VOL connector");
}
}
break;
case VOL_BY_VALUE:
/* Retrieve VOL connector by ID */
if ((connector_is_registered = H5VLis_connector_registered_by_value(vol_info->u.value)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't check if VOL connector is registered");
if (connector_is_registered) {
if ((connector_id = H5VLget_connector_id_by_value(vol_info->u.value)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't get VOL connector ID");
}
else {
/* Check for VOL connectors that ship with the library */
if (vol_info->u.value == H5VL_NATIVE_VALUE) {
connector_id = H5VL_NATIVE;
}
else if (vol_info->u.value == H5VL_PASSTHRU_VALUE) {
connector_id = H5VL_PASSTHRU;
}
else {
/* NOTE: Not being able to pass in a VIPL may be a limitation for some
* connectors.
*/
if ((connector_id = H5VLregister_connector_by_value(vol_info->u.value, H5P_DEFAULT)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't register VOL connector");
}
}
break;
default:
H5TOOLS_GOTO_ERROR(FAIL, "invalid VOL retrieval type");
}
/* Convert the info string, if provided */
if (vol_info->info_string)
if (H5VLconnector_str_to_info(vol_info->info_string, connector_id, &connector_info) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't get VOL connector info from string");
/* Set the VOL connector on the fapl */
if (H5Pset_vol(fapl_id, connector_id, connector_info) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "can't set VOL connector on FAPL");
done:
if (connector_info)
if (H5VLfree_connector_info(connector_id, connector_info))
H5TOOLS_ERROR(FAIL, "failed to free VOL connector-specific info");
if (ret_value < 0) {
if (connector_id >= 0 && H5Idec_ref(connector_id) < 0)
H5TOOLS_ERROR(FAIL, "failed to decrement refcount on VOL connector ID");
}
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: h5tools_get_fapl
*
* Purpose: Copies an input fapl and then sets a VOL and/or a VFD on it.
*
* The returned fapl must be closed by the caller.
*
* Return: positive - succeeded
* negative - failed
*-------------------------------------------------------------------------
*/
hid_t
h5tools_get_fapl(hid_t prev_fapl_id, h5tools_vol_info_t *vol_info,
h5tools_vfd_info_t *vfd_info)
{
hid_t new_fapl_id = H5I_INVALID_HID;
hid_t ret_value = H5I_INVALID_HID;
if (prev_fapl_id < 0)
H5TOOLS_GOTO_ERROR(FAIL, "invalid FAPL");
/* Make a copy of the FAPL or create one if H5P_DEFAULT is specified. */
if (H5P_DEFAULT == prev_fapl_id) {
if ((new_fapl_id = H5Pcreate(H5P_FILE_ACCESS)) < 0)
H5TOOLS_GOTO_ERROR(H5I_INVALID_HID, "H5Pcreate failed");
}
else {
if ((new_fapl_id = H5Pcopy(prev_fapl_id)) < 0)
H5TOOLS_GOTO_ERROR(H5I_INVALID_HID, "H5Pcopy failed");
}
/* Set non-default VOL connector, if requested */
if (vol_info)
if (h5tools_set_fapl_vol(new_fapl_id, vol_info) < 0)
H5TOOLS_GOTO_ERROR(H5I_INVALID_HID, "failed to set VOL on FAPL");
/* Set non-default virtual file driver, if requested */
if (vfd_info)
if (h5tools_set_fapl_vfd(new_fapl_id, vfd_info) < 0)
H5TOOLS_GOTO_ERROR(H5I_INVALID_HID, "failed to set VFD on FAPL");
ret_value = new_fapl_id;
done:
if ((new_fapl_id >= 0) && (ret_value < 0)) {
H5Pclose(new_fapl_id);
new_fapl_id = H5I_INVALID_HID;
}
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: h5tools_get_vfd_name
*
* Purpose: Given a FAPL, retrieves the name of the VFL driver set on it
* if using a native-terminal VOL connector. If a
* non-native-terminal VOL connector is set on the FAPL, the
* first byte of the returned driver name will be set to the null
* terminator.
*
* Return: SUCCEED/FAIL
*-------------------------------------------------------------------------
*/
herr_t
h5tools_get_vfd_name(hid_t fapl_id, char *drivername, size_t drivername_size)
{
hid_t fapl_vol_id = H5I_INVALID_HID;
herr_t ret_value = SUCCEED;
if (fapl_id < 0)
H5TOOLS_GOTO_ERROR(FAIL, "invalid FAPL");
if (!drivername)
H5TOOLS_GOTO_ERROR(FAIL, "drivername is NULL");
if (drivername && !drivername_size)
H5TOOLS_GOTO_ERROR(FAIL, "drivername_size must be non-zero");
/* Initialize the driver name */
drivername[0] = '\0';
if (fapl_id == H5P_DEFAULT)
fapl_id = H5P_FILE_ACCESS_DEFAULT;
/* Retrieve ID of the VOL connector set on the FAPL */
if (H5Pget_vol_id(fapl_id, &fapl_vol_id) < 0)
H5TOOLS_ERROR(FAIL, "failed to retrieve VOL ID from FAPL");
/* TODO: For now, we have no way of determining if an arbitrary
* VOL connector is native-terminal. */
if (fapl_vol_id == H5VL_NATIVE || fapl_vol_id == H5VL_PASSTHRU) {
const char *driver_name;
hid_t driver_id;
if ((driver_id = H5Pget_driver(fapl_id)) < 0)
H5TOOLS_GOTO_ERROR(FAIL, "failed to retrieve VFL driver ID from FAPL");
if (driver_id == H5FD_SEC2)
driver_name = drivernames[SEC2_VFD_IDX];
#ifdef H5_HAVE_DIRECT
else if (driver_id == H5FD_DIRECT)
driver_name = drivernames[DIRECT_VFD_IDX];
#endif
else if (driver_id == H5FD_LOG)
driver_name = drivernames[LOG_VFD_IDX];
#ifdef H5_HAVE_WINDOWS
else if (driver_id == H5FD_WINDOWS)
driver_name = drivernames[WINDOWS_VFD_IDX];
#endif
else if (driver_id == H5FD_STDIO)
driver_name = drivernames[STDIO_VFD_IDX];
else if (driver_id == H5FD_CORE)
driver_name = drivernames[CORE_VFD_IDX];
else if (driver_id == H5FD_FAMILY)
driver_name = drivernames[FAMILY_VFD_IDX];
else if (driver_id == H5FD_MULTI)
driver_name = drivernames[MULTI_VFD_IDX];
#ifdef H5_HAVE_PARALLEL
else if (driver_id == H5FD_MPIO)
driver_name = drivernames[MPIO_VFD_IDX];
#endif
#ifdef H5_HAVE_ROS3_VFD
else if (driver_id == H5FD_ROS3)
driver_name = drivernames[ROS3_VFD_IDX];
#endif
#ifdef H5_HAVE_LIBHDFS
else if (driver_id == H5FD_HDFS)
driver_name = drivernames[HDFS_VFD_IDX];
#endif
else
driver_name = "unknown";
HDstrncpy(drivername, driver_name, drivername_size);
drivername[drivername_size - 1] = '\0';
}
done:
/* Close retrieved VOL ID */
if (fapl_vol_id >= 0)
if (H5VLclose(fapl_vol_id) < 0)
H5TOOLS_ERROR(FAIL, "failed to close VOL ID");
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: h5tools_fopen
*
* Purpose: Opens file FNAME using the specified flags and FAPL.
*
* The 'use_specific_driver' parameter is used to control the
* VFD/VOL connector that this routine uses to open the file
* with. If 'use_specific_driver' is set to TRUE, this routine
* assumes that the caller has already set a specific VFD or VOL
* connector on the given FAPL and will attempt to directly use
* the FAPL for opening the file. We assume that the caller knows
* what they are doing; if the file is unable to be opened using
* that FAPL, this routine will return H5I_INVALID_HID.
*
* However, if 'use_specific_driver' is set to FALSE, this
* routine assumes that the caller HAS NOT set a specific VFD or
* VOL connector on the given FAPL and will instead loop through
* the various available VFL drivers and VOL connectors trying to
* open FNAME.
*
* The list of available VFL drivers is as follows:
* - If the HDF5 library is version 1.2 or less, then we have
* only the SEC2 driver to try out.
* - If the HDF5 library is greater than version 1.2, then we
* have the FAMILY, SPLIT, and MULTI drivers to play with.
*
* The list of available VOL connectors is as follows:
* - "Native" VOL connector
* - Pass-through VOL connector
*
* Return:
* On success, returns a file ID for the opened file. If DRIVERNAME is
* non-null and the native VOL connector is the terminal connector,
* then the first DRIVERNAME_SIZE-1 characters of the driver name are
* copied into the DRIVERNAME array and null terminated. If the
* native VOL connector is NOT the terminal connector, then the first
* byte of DRIVERNAME will be set to the null terminator.
*
* On failure, the function returns H5I_INVALID_HID and DRIVERNAME
* will not be set.
*-------------------------------------------------------------------------
*/
hid_t
h5tools_fopen(const char *fname, unsigned flags, hid_t fapl_id, hbool_t use_specific_driver,
char *drivername, size_t drivername_size)
{
hid_t fid = H5I_INVALID_HID;
hid_t tmp_fapl_id = H5I_INVALID_HID;
hid_t used_fapl_id = H5I_INVALID_HID;
unsigned volnum, drivernum;
hid_t ret_value = H5I_INVALID_HID;
/*
* First try to open the file using just the given FAPL. If the
* HDF5_VOL_CONNECTOR environment variable has been set, this will
* allow us to attempt to open the file using the specified VOL
* connector before we go looping through all available ones,
* which will override any VOL connector set by use of the
* environment variable.
*/
/* Allow error stack display if --enable-error-stack has optional arg number */
if (enable_error_stack > 1) {
fid = H5Fopen(fname, flags, fapl_id);
}
else {
H5E_BEGIN_TRY {
fid = H5Fopen(fname, flags, fapl_id);
} H5E_END_TRY;
}
/* If we succeeded in opening the file, we're done. */
if (fid >= 0) {
used_fapl_id = fapl_id;
H5TOOLS_GOTO_DONE(fid);
}
/*
* If we failed to open the file and the caller specified 'use_specific_driver'
* as TRUE, we should return failure now since the file couldn't be opened with
* the VFL driver/VOL connector that was set on the FAPL by the caller.
*/
if (fid < 0 && use_specific_driver)
H5TOOLS_GOTO_ERROR(H5I_INVALID_HID, "failed to open file using specified FAPL");
/*
* As a final resort, try to open the file using each of the available
* VOL connectors. When the native VOL connector is the current "terminal"
* connector being looked at, also try using each of the available VFL drivers.
*/
for (volnum = 0; volnum < NUM_VOLS; volnum++) {
h5tools_vol_info_t vol_info;
vol_info.type = VOL_BY_NAME;
vol_info.info_string = NULL;
vol_info.u.name = volnames[volnum];
/* TODO: For now, we have no way of determining if an arbitrary
* VOL connector is native-terminal so we only try VFDs with the
* actual native VOL connector.
*/
if (NATIVE_VOL_IDX == volnum) {
/*
* If using the native VOL connector, or a VOL connector which has the
* native connector as its terminal connector, loop through all of the
* VFL drivers as well.
*/
for (drivernum = 0; drivernum < NUM_DRIVERS; drivernum++) {
h5tools_vfd_info_t vfd_info;
/* Skip the log VFD as it prints out to standard out
* and is fundamentally SEC2 anyway.
*/
if (drivernum == LOG_VFD_IDX)
continue;
vfd_info.info = NULL;
vfd_info.name = drivernames[drivernum];
/* Get a fapl reflecting the selected VOL connector and VFD */
if ((tmp_fapl_id = h5tools_get_fapl(fapl_id, &vol_info, &vfd_info)) < 0)
continue;
/* Can we open the file with this combo? */
if ((fid = h5tools_fopen(fname, flags, tmp_fapl_id, TRUE, drivername, drivername_size)) >= 0) {
used_fapl_id = tmp_fapl_id;
H5TOOLS_GOTO_DONE(fid);
}
else {
/* Close the temporary fapl */
H5Pclose(tmp_fapl_id);
tmp_fapl_id = H5I_INVALID_HID;
}
}
}
else {
/* NOT the native VOL connector */
/* Get a FAPL for the current VOL connector */
if ((tmp_fapl_id = h5tools_get_fapl(fapl_id, &vol_info, NULL)) < 0)
continue;
/* Can we open the file with this connector? */
if ((fid = h5tools_fopen(fname, flags, tmp_fapl_id, TRUE, drivername, drivername_size)) >= 0) {
used_fapl_id = tmp_fapl_id;
H5TOOLS_GOTO_DONE(fid);
}
else {
/* Close the temporary VOL FAPL */
H5Pclose(tmp_fapl_id);
tmp_fapl_id = H5I_INVALID_HID;
}
}
}
/* File was unable to be opened at all */
ret_value = H5I_INVALID_HID;
done:
/* Save the driver name if using a native-terminal VOL connector */
if (drivername && drivername_size && ret_value >= 0)
if (used_fapl_id >= 0 && h5tools_get_vfd_name(used_fapl_id, drivername, drivername_size) < 0)
H5TOOLS_ERROR(H5I_INVALID_HID, "failed to retrieve name of VFD used to open file");
if (tmp_fapl_id >= 0)
H5Pclose(tmp_fapl_id);
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: h5tools_count_ncols
*
* Purpose: Count the number of columns in a string. This is the number of
* characters in the string not counting line-control characters.
*
* Return: success - returns the width of the string.
* failure - 0.
*-------------------------------------------------------------------------
*/
H5_ATTR_PURE static size_t
h5tools_count_ncols(const char *s)
{
register size_t i;
for (i = 0; *s; s++)
if (*s >= ' ')
i++;
return i;
}
/*-------------------------------------------------------------------------
* Function: h5tools_detect_vlen
*
* Purpose: Recursive check for any variable length data in given type.
*
* Return: TRUE : type contains any variable length data
* FALSE : type doesn't contain any variable length data
* Negative value: failed
*-------------------------------------------------------------------------
*/
htri_t
h5tools_detect_vlen(hid_t tid)
{
htri_t ret = FALSE;
/* recursive detect any vlen data values in type (compound, array ...) */
ret = H5Tdetect_class(tid, H5T_VLEN);
if((ret == TRUE) || (ret < 0))
goto done;
/* recursive detect any vlen string in type (compound, array ...) */
ret = h5tools_detect_vlen_str(tid);
if((ret == TRUE) || (ret < 0))
goto done;
done:
return ret;
}
/*-------------------------------------------------------------------------
* Function: h5tools_detect_vlen_str
*
* Purpose: Recursive check for variable length string of a datatype.
*
* Return: TRUE : type contains any variable length string
* FALSE : type doesn't contain any variable length string
* Negative value: failed
*-------------------------------------------------------------------------
*/
htri_t
h5tools_detect_vlen_str(hid_t tid)
{
H5T_class_t tclass = -1;
htri_t ret = FALSE;
ret = H5Tis_variable_str(tid);
if((ret == TRUE) || (ret < 0))
goto done;
tclass = H5Tget_class(tid);
if(tclass == H5T_ARRAY || tclass == H5T_VLEN) {
hid_t btid = H5Tget_super(tid);
if(btid < 0) {
ret = (htri_t)btid;
goto done;
}
ret = h5tools_detect_vlen_str(btid);
if((ret == TRUE) || (ret < 0)) {
H5Tclose(btid);
goto done;
}
}
else if(tclass == H5T_COMPOUND) {
unsigned nmembs;
int snmembs = H5Tget_nmembers(tid);
unsigned u;
if(snmembs < 0) {
ret = FAIL;
goto done;
}
nmembs = (unsigned)snmembs;
for(u = 0; u < nmembs; u++) {
hid_t mtid = H5Tget_member_type(tid, u);
ret = h5tools_detect_vlen_str(mtid);
if((ret == TRUE) || (ret < 0)) {
H5Tclose(mtid);
goto done;
}
H5Tclose(mtid);
}
}
done:
return ret;
}
/*-------------------------------------------------------------------------
* Function: h5tools_simple_prefix
*
* Purpose: If /ctx->need_prefix/ is set then terminate the current line (if
* applicable), calculate the prefix string, and display it at the start
* of a line.
*
* Return: None
*-------------------------------------------------------------------------
*/
void
h5tools_simple_prefix(FILE *stream, const h5tool_format_t *info,
h5tools_context_t *ctx, hsize_t elmtno, int secnum)
{
h5tools_str_t prefix;
h5tools_str_t str; /*temporary for indentation */
size_t templength = 0;
unsigned u, indentlevel = 0;
if (stream == NULL)
return;
if (!ctx->need_prefix)
return;
H5TOOLS_START_DEBUG("");
HDmemset(&prefix, 0, sizeof(h5tools_str_t));
HDmemset(&str, 0, sizeof(h5tools_str_t));
/* Terminate previous line, if any */
H5TOOLS_DEBUG("before CR elmtno=%ld, ctx->cur_column=%d, info->idx_fmt=%s, info->line_suf=%s", elmtno, ctx->cur_column, info->idx_fmt, info->line_suf);
if (ctx->cur_column) {
PUTSTREAM(OPT(info->line_suf, ""), stream);
HDputc('\n', stream);
PUTSTREAM(OPT(info->line_sep, ""), stream);
}
H5TOOLS_DEBUG("after CR elmtno=%ld, ctx->ndims=%d", elmtno, ctx->ndims);
/* Calculate new prefix */
h5tools_str_prefix(&prefix, info, elmtno, ctx->ndims, ctx);
H5TOOLS_DEBUG("prefix=%s - str=%s", prefix.s, str.s);
/* Write new prefix to output */
if (ctx->indent_level > 0)
indentlevel = ctx->indent_level;
else
/*
* This is because sometimes we don't print out all the header
* info for the data (like the tattr-2.ddl example). If that happens
* the ctx->indent_level is negative so we need to skip the above and
* just print out the default indent levels.
*/
indentlevel = ctx->default_indent_level;
/* when printing array indices, print the indentation before the prefix
the prefix is printed one indentation level before */
if (info->pindex)
for (u = 0; u < indentlevel - 1; u++)
PUTSTREAM(h5tools_str_fmt(&str, (size_t)0, info->line_indent), stream);
if (elmtno == 0 && secnum == 0 && info->line_1st)
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_1st), stream);
else if (secnum && info->line_cont)
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_cont), stream);
else
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_pre), stream);
templength = h5tools_str_len(&prefix);
H5TOOLS_DEBUG("prefix=%s - templength=%d", prefix.s, templength);
for (u = 0; u < indentlevel; u++) {
/*we already made the indent for the array indices case */
if (!info->pindex) {
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_indent), stream);
templength += h5tools_str_len(&prefix);
}
else {
/*we cannot count the prefix for the array indices case */
templength += h5tools_str_len(&str);
}
}
H5TOOLS_DEBUG("prefix=%s - templength=%d", prefix.s, templength);
ctx->cur_column = ctx->prev_prefix_len = templength;
ctx->cur_elmt = 0;
ctx->need_prefix = 0;
H5TOOLS_DEBUG("prefix=%s - str=%s", prefix.s, str.s);
/* Free string */
h5tools_str_close(&prefix);
h5tools_str_close(&str);
H5TOOLS_ENDDEBUG("");
}
/*-------------------------------------------------------------------------
* Function: h5tools_region_simple_prefix
*
* Purpose: If /ctx->need_prefix/ is set then terminate the current line (if
* applicable), calculate the prefix string, and display it at the start
* of a line. Calls region specific function.
*
* Return: None
*-------------------------------------------------------------------------
*/
void
h5tools_region_simple_prefix(FILE *stream, const h5tool_format_t *info,
h5tools_context_t *ctx, hsize_t elmtno, hsize_t *ptdata, int secnum)
{
h5tools_str_t prefix;
h5tools_str_t str; /*temporary for indentation */
size_t templength = 0;
unsigned u, indentlevel = 0;
if (stream == NULL)
return;
if (!ctx->need_prefix)
return;
HDmemset(&prefix, 0, sizeof(h5tools_str_t));
HDmemset(&str, 0, sizeof(h5tools_str_t));
/* Terminate previous line, if any */
if (ctx->cur_column) {
PUTSTREAM(OPT(info->line_suf, ""), stream);
HDputc('\n', stream);
PUTSTREAM(OPT(info->line_sep, ""), stream);
}
/* Calculate new prefix */
h5tools_str_region_prefix(&prefix, info, elmtno, ptdata, ctx->ndims, ctx->p_max_idx, ctx);
/* Write new prefix to output */
if (ctx->indent_level > 0)
indentlevel = ctx->indent_level;
else
/*
* This is because sometimes we don't print out all the header
* info for the data (like the tattr-2.ddl example). If that happens
* the ctx->indent_level is negative so we need to skip the above and
* just print out the default indent levels.
*/
indentlevel = ctx->default_indent_level;
/* when printing array indices, print the indentation before the prefix
the prefix is printed one indentation level before */
if (info->pindex)
for (u = 0; u < indentlevel - 1; u++)
PUTSTREAM(h5tools_str_fmt(&str, (size_t)0, info->line_indent), stream);
if (elmtno == 0 && secnum == 0 && info->line_1st)
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_1st), stream);
else if (secnum && info->line_cont)
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_cont), stream);
else
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_pre), stream);
templength = h5tools_str_len(&prefix);
for (u = 0; u < indentlevel; u++)
/*we already made the indent for the array indices case */
if (!info->pindex) {
PUTSTREAM(h5tools_str_fmt(&prefix, (size_t)0, info->line_indent), stream);
templength += h5tools_str_len(&prefix);
}
else {
/*we cannot count the prefix for the array indices case */
templength += h5tools_str_len(&str);
}
ctx->cur_column = ctx->prev_prefix_len = templength;
ctx->cur_elmt = 0;
ctx->need_prefix = 0;
/* Free string */
h5tools_str_close(&prefix);
h5tools_str_close(&str);
}
/*-------------------------------------------------------------------------
* Function: h5tools_render_element
*
* Purpose: Prints the string buffer to the output STREAM. The string is
* printed according to the format described in INFO. The CTX struct
* contains context information shared between calls to this function.
*
* Return: False if a dimension end is reached
* True otherwise
*
* In/Out:
* h5tools_context_t *ctx
* h5tools_str_t *buffer
* hsize_t *curr_pos
*
* Parameters Description:
* h5tools_str_t *buffer is the string into which to render
* hsize_t curr_pos is the total data element position
* size_t ncols
* hsize_t local_elmt_counter is the local element loop counter
* hsize_t elmt_count is the data element loop counter
*-------------------------------------------------------------------------
*/
hbool_t
h5tools_render_element(FILE *stream, const h5tool_format_t *info,
h5tools_context_t *ctx, h5tools_str_t *buffer, hsize_t *curr_pos,
size_t ncols, hsize_t local_elmt_counter, hsize_t elmt_counter)
{
hbool_t dimension_break = TRUE;
char *s = NULL;
char *section = NULL; /* a section of output */
int secnum; /* section sequence number */
int multiline; /* datum was multiline */
if (stream == NULL)
return dimension_break;
H5TOOLS_START_DEBUG(" need_prefix=%d", ctx->need_prefix);
H5TOOLS_DEBUG("elmt_counter=%ld - local_elmt_counter=%ld", elmt_counter, local_elmt_counter);
s = h5tools_str_fmt(buffer, (size_t)0, "%s");
H5TOOLS_DEBUG("s=%s", s);
/*
* If the element would split on multiple lines if printed at our
* current location...
*/
if (info->line_multi_new == 1 &&
(ctx->cur_column + h5tools_count_ncols(s) +
HDstrlen(OPT(info->elmt_suf2, " ")) +
HDstrlen(OPT(info->line_suf, ""))) > ncols) {
if (ctx->prev_multiline) {
/*
* ... and the previous element also occupied more than one
* line, then start this element at the beginning of a line.
*/
ctx->need_prefix = TRUE;
}
else if ((ctx->prev_prefix_len + h5tools_count_ncols(s) +
HDstrlen(OPT(info->elmt_suf2, " ")) +
HDstrlen(OPT(info->line_suf, ""))) <= ncols) {
/*
* ...but *could* fit on one line otherwise, then we
* should end the current line and start this element on its
* own line.
*/
ctx->need_prefix = TRUE;
}
H5TOOLS_DEBUG("ctx->need_prefix=%d", ctx->need_prefix);
}
/*
* We need to break after each row of a dimension---> we should
* break at the end of the each last dimension well that is the
* way the dumper did it before
*/
if (info->arr_linebreak && ctx->cur_elmt) {
if (ctx->size_last_dim && (ctx->cur_elmt % ctx->size_last_dim) == 0)
ctx->need_prefix = TRUE;
if (elmt_counter == ctx->size_last_dim) {
ctx->need_prefix = TRUE;
dimension_break = FALSE;
}
H5TOOLS_DEBUG("ctx->need_prefix=%d", ctx->need_prefix);
}
H5TOOLS_DEBUG("elmt_counter=%ld - ctx->size_last_dim=%ld info->line_suf=%s", elmt_counter, ctx->size_last_dim, info->line_suf);
/*
* If the previous element occupied multiple lines and this element
* is too long to fit on a line then start this element at the
* beginning of the line.
*/
if (info->line_multi_new == 1 &&
ctx->prev_multiline &&
(ctx->cur_column +
h5tools_count_ncols(s) +
HDstrlen(OPT(info->elmt_suf2, " ")) +
HDstrlen(OPT(info->line_suf, ""))) > ncols)
ctx->need_prefix = TRUE;
H5TOOLS_DEBUG("ctx->need_prefix=%d", ctx->need_prefix);
/*
* If too many elements have already been printed then we need to
* start a new line.
*/
if (info->line_per_line > 0 && ctx->cur_elmt >= info->line_per_line)
ctx->need_prefix = TRUE;
H5TOOLS_DEBUG("ctx->need_prefix=%d", ctx->need_prefix);
/*
* Each OPTIONAL_LINE_BREAK embedded in the rendered string can cause
* the data to split across multiple lines. We display the sections
* one-at a time.
*/
multiline = 0;
for (secnum = 0, multiline = 0;
(section = HDstrtok(secnum ? NULL : s, OPTIONAL_LINE_BREAK));
secnum++) {
/*
* If the current section plus possible suffix and end-of-line
* information would cause the output to wrap then we need to
* start a new line.
*/
/*
* check for displaying prefix for each section
*/
if ( (ctx->cur_column + HDstrlen(section) +
HDstrlen(OPT(info->elmt_suf2, " ")) +
HDstrlen(OPT(info->line_suf, ""))) > ncols)
ctx->need_prefix = 1;
/*
* Print the prefix or separate the beginning of this element
* from the previous element.
*/
H5TOOLS_DEBUG("ctx->need_prefix=%d", ctx->need_prefix);
if (ctx->need_prefix) {
if (secnum)
multiline++;
/* pass to the prefix in h5tools_simple_prefix the total
* position instead of the current stripmine position i;
* this is necessary to print the array indices
*/
*curr_pos = ctx->sm_pos + local_elmt_counter;
H5TOOLS_DEBUG("curr_pos=%ld - ctx->sm_pos=%ld - ctx->ndims=%ld", *curr_pos, ctx->sm_pos, ctx->ndims);
h5tools_simple_prefix(stream, info, ctx, *curr_pos, secnum);
}
else if ((local_elmt_counter || ctx->continuation) && secnum == 0) {
PUTSTREAM(OPT(info->elmt_suf2, " "), stream);
ctx->cur_column += HDstrlen(OPT(info->elmt_suf2, " "));
}
H5TOOLS_DEBUG("section=%s", section);
/* Print the section */
PUTSTREAM(section, stream);
ctx->cur_column += HDstrlen(section);
}
ctx->prev_multiline = multiline;
H5TOOLS_ENDDEBUG("");
return dimension_break;
}
/*-------------------------------------------------------------------------
* Function: h5tools_render_region_element
*
* Purpose: Prints the string buffer to the output STREAM. The string is
* printed according to the format described in INFO. The CTX struct
* contains context information shared between calls to this function.
*
* Return:
* False if a dimension end is reached
* True otherwise
*
* In/Out:
* h5tools_context_t *ctx
* h5tools_str_t *buffer
* hsize_t *curr_pos
*
* Parameters Description:
* h5tools_str_t *buffer is the string into which to render
* hsize_t curr_pos is the total data element position
* size_t ncols
* hsize_t *ptdata
* hsize_t local_elmt_counter is the local element loop counter
* hsize_t elmt_count is the data element loop counter
*-------------------------------------------------------------------------
*/
hbool_t
h5tools_render_region_element(FILE *stream, const h5tool_format_t *info,
h5tools_context_t *ctx, h5tools_str_t *buffer, hsize_t *curr_pos,
size_t ncols, hsize_t *ptdata, hsize_t local_elmt_counter, hsize_t elmt_counter)
{
hbool_t dimension_break = TRUE;
char *s = NULL;
char *section = NULL; /* a section of output */
int secnum; /* section sequence number */
int multiline; /* datum was multiline */
H5TOOLS_START_DEBUG("");
H5TOOLS_DEBUG("elmt_counter=%ld - local_elmt_counter=%ld", elmt_counter, local_elmt_counter);
s = h5tools_str_fmt(buffer, (size_t)0, "%s");
/*
* If the element would split on multiple lines if printed at our
* current location...
*/
if (info->line_multi_new == 1 && (ctx->cur_column + h5tools_count_ncols(s) +
HDstrlen(OPT(info->elmt_suf2, " ")) + HDstrlen(OPT(info->line_suf, ""))) > ncols) {
if (ctx->prev_multiline) {
/*
* ... and the previous element also occupied more than one
* line, then start this element at the beginning of a line.
*/
ctx->need_prefix = TRUE;
}
else if ((ctx->prev_prefix_len + h5tools_count_ncols(s) +
HDstrlen(OPT(info->elmt_suf2, " ")) + HDstrlen(OPT(info->line_suf, ""))) <= ncols) {
/*
* ...but *could* fit on one line otherwise, then we
* should end the current line and start this element on its
* own line.
*/
ctx->need_prefix = TRUE;
}
}
/*
* We need to break after each row of a dimension---> we should
* break at the end of the each last dimension well that is the
* way the dumper did it before
*/
if (info->arr_linebreak && ctx->cur_elmt) {
if (ctx->size_last_dim && (ctx->cur_elmt % ctx->size_last_dim) == 0)
ctx->need_prefix = TRUE;
if (elmt_counter == ctx->size_last_dim) {
ctx->need_prefix = TRUE;
dimension_break = FALSE;
}
}
/*
* If the previous element occupied multiple lines and this element
* is too long to fit on a line then start this element at the
* beginning of the line.
*/
if (info->line_multi_new == 1 && ctx->prev_multiline &&
(ctx->cur_column + h5tools_count_ncols(s) + HDstrlen(OPT(info->elmt_suf2, " ")) + HDstrlen(OPT(info->line_suf, ""))) > ncols)
ctx->need_prefix = TRUE;
/*
* If too many elements have already been printed then we need to
* start a new line.
*/
if (info->line_per_line > 0 && ctx->cur_elmt >= info->line_per_line)
ctx->need_prefix = TRUE;
/*
* Each OPTIONAL_LINE_BREAK embedded in the rendered string can cause
* the data to split across multiple lines. We display the sections
* one-at a time.
*/
multiline = 0;
for (secnum = 0, multiline = 0; (section = HDstrtok(secnum ? NULL : s, OPTIONAL_LINE_BREAK)); secnum++) {
/*
* If the current section plus possible suffix and end-of-line
* information would cause the output to wrap then we need to
* start a new line.
*/
/*
* Added the info->skip_first because the dumper does not want
* this check to happen for the first line
*/
if ((!info->skip_first || local_elmt_counter) &&
(ctx->cur_column + HDstrlen(section) + HDstrlen(OPT(info->elmt_suf2, " ")) + HDstrlen(OPT(info->line_suf, ""))) > ncols)
ctx->need_prefix = 1;
/*
* Print the prefix or separate the beginning of this element
* from the previous element.
*/
if (ctx->need_prefix) {
if (secnum)
multiline++;
/* pass to the prefix in h5tools_region_simple_prefix the total
* position instead of the current stripmine position i;
* this is necessary to print the array indices
*/
*curr_pos = ctx->sm_pos + local_elmt_counter;
H5TOOLS_DEBUG("curr_pos=%ld - ctx->sm_pos=%ld", *curr_pos, ctx->sm_pos);
h5tools_region_simple_prefix(stream, info, ctx, local_elmt_counter, ptdata, secnum);
}
else if ((local_elmt_counter || ctx->continuation) && secnum == 0) {
PUTSTREAM(OPT(info->elmt_suf2, " "), stream);
ctx->cur_column += HDstrlen(OPT(info->elmt_suf2, " "));
}
/* Print the section */
PUTSTREAM(section, stream);
ctx->cur_column += HDstrlen(section);
}
ctx->prev_multiline = multiline;
H5TOOLS_ENDDEBUG("");
return dimension_break;
}
/*-------------------------------------------------------------------------
* Function: init_acc_pos
*
* Purpose: initialize accumulator and matrix position
*
* Return: void
*-------------------------------------------------------------------------
*/
void
init_acc_pos(h5tools_context_t *ctx, hsize_t *dims)
{
int i;
unsigned j;
H5TOOLS_START_DEBUG("");
if(ctx->ndims > 0) {
ctx->acc[ctx->ndims - 1] = 1;
for (i = ((int)ctx->ndims - 2); i >= 0; i--) {
ctx->acc[i] = ctx->acc[i + 1] * dims[i + 1];
H5TOOLS_DEBUG("ctx->acc[%d]=%ld", i, ctx->acc[i]);
}
for (j = 0; j < ctx->ndims; j++)
ctx->pos[j] = 0;
}
H5TOOLS_ENDDEBUG("");
}
/*-------------------------------------------------------------------------
* Function: render_bin_output
*
* Purpose: Write one element of memory buffer to a binary file stream
*
* Return: Success: SUCCEED
* Failure: FAIL
*-------------------------------------------------------------------------
*/
int
render_bin_output(FILE *stream, hid_t container, hid_t tid, void *_mem, hsize_t block_nelmts)
{
unsigned char *mem = (unsigned char*)_mem;
size_t size; /* datum size */
hsize_t block_index;
H5T_class_t type_class;
hbool_t past_catch = FALSE;
int ret_value = 0;
H5TOOLS_START_DEBUG("");
if((size = H5Tget_size(tid)) == 0)
H5TOOLS_THROW((-1), "H5Tget_size failed");
if((type_class = H5Tget_class(tid)) < 0)
H5TOOLS_THROW((-1), "H5Tget_class failed");
switch (type_class) {
case H5T_INTEGER:
case H5T_FLOAT:
case H5T_ENUM:
case H5T_BITFIELD:
H5TOOLS_DEBUG("numbers");
block_index = block_nelmts * size;
while(block_index > 0) {
size_t bytes_in = 0; /* # of bytes to write */
size_t bytes_wrote = 0; /* # of bytes written */
if(block_index > sizeof(size_t))
bytes_in = sizeof(size_t);
else
bytes_in = (size_t)block_index;
bytes_wrote = HDfwrite(mem, 1, bytes_in, stream);
if(bytes_wrote != bytes_in || (0 == bytes_wrote && HDferror(stream)))
H5TOOLS_THROW((-1), "fwrite failed");
block_index -= (hsize_t)bytes_wrote;
mem = mem + bytes_wrote;
}
break;
case H5T_STRING:
{
unsigned int i;
H5T_str_t pad;
char *s = NULL;
unsigned char tempuchar;
H5TOOLS_DEBUG("H5T_STRING");
pad = H5Tget_strpad(tid);
for (block_index = 0; block_index < block_nelmts; block_index++) {
mem = ((unsigned char*)_mem) + block_index * size;
if (H5Tis_variable_str(tid)) {
s = *(char **)((void *)mem);
if (s != NULL)
size = HDstrlen(s);
else
H5TOOLS_THROW((-1), "NULL string");
}
else {
s = (char *) mem;
}
for (i = 0; i < size && (s[i] || pad != H5T_STR_NULLTERM); i++) {
HDmemcpy(&tempuchar, &s[i], sizeof(unsigned char));
if (1 != HDfwrite(&tempuchar, sizeof(unsigned char), 1, stream))
H5TOOLS_THROW((-1), "fwrite failed");
} /* i */
} /* for (block_index = 0; block_index < block_nelmts; block_index++) */
}
break;
case H5T_COMPOUND:
{
int snmembs;
unsigned nmembs;
H5TOOLS_DEBUG("H5T_COMPOUND");
if((snmembs = H5Tget_nmembers(tid)) < 0)
H5TOOLS_THROW((-1), "H5Tget_nmembers of compound failed");
nmembs = (unsigned)snmembs;
for (block_index = 0; block_index < block_nelmts; block_index++) {
unsigned j;
mem = ((unsigned char*)_mem) + block_index * size;
for (j = 0; j < nmembs; j++) {
hid_t memb = H5I_INVALID_HID;
size_t offset;
offset = H5Tget_member_offset(tid, j);
memb = H5Tget_member_type(tid, j);
if (render_bin_output(stream, container, memb, mem + offset, 1) < 0) {
H5Tclose(memb);
H5TOOLS_THROW((-1), "render_bin_output of compound member failed");
}
H5Tclose(memb);
}
}
}
break;
case H5T_ARRAY:
{
int k, ndims;
hsize_t dims[H5S_MAX_RANK], temp_nelmts, nelmts;
hid_t memb = H5I_INVALID_HID;
H5TOOLS_DEBUG("H5T_ARRAY");
/* get the array's base datatype for each element */
memb = H5Tget_super(tid);
ndims = H5Tget_array_ndims(tid);
H5Tget_array_dims2(tid, dims);
if(ndims >= 1 && ndims <= H5S_MAX_RANK) {
/* calculate the number of array elements */
for (k = 0, nelmts = 1; k < ndims; k++) {
temp_nelmts = nelmts;
temp_nelmts *= dims[k];
nelmts = (size_t) temp_nelmts;
}
}
else {
H5Tclose(memb);
H5TOOLS_THROW((-1), "calculate the number of array elements failed");
}
for (block_index = 0; block_index < block_nelmts; block_index++) {
mem = ((unsigned char*)_mem) + block_index * size;
/* dump the array element */
if (render_bin_output(stream, container, memb, mem, nelmts) < 0) {
H5Tclose(memb);
H5TOOLS_THROW((-1), "render_bin_output failed");
}
}
H5Tclose(memb);
}
break;
case H5T_VLEN:
{
hsize_t nelmts;
hid_t memb = H5I_INVALID_HID;
H5TOOLS_DEBUG("H5T_VLEN");
/* get the VL sequences's base datatype for each element */
memb = H5Tget_super(tid);
for (block_index = 0; block_index < block_nelmts; block_index++) {
mem = ((unsigned char*)_mem) + block_index * size;
/* Get the number of sequence elements */
nelmts = ((hvl_t *)((void *)mem))->len;
/* dump the array element */
if (render_bin_output(stream, container, memb, ((char *) (((hvl_t *)((void *)mem))->p)), nelmts) < 0) {
H5Tclose(memb);
H5TOOLS_THROW((-1), "render_bin_output failed");
}
}
H5Tclose(memb);
}
break;
case H5T_REFERENCE:
{
H5TOOLS_DEBUG("reference class type");
if (H5Tequal(tid, H5T_STD_REF)) {
H5TOOLS_DEBUG("H5T_STD_REF");
if (region_output) {
/* region data */
hid_t region_id = H5I_INVALID_HID;
hid_t region_space = H5I_INVALID_HID;
H5S_sel_type region_type;
for (block_index = 0; block_index < block_nelmts; block_index++) {
mem = ((unsigned char*)_mem) + block_index * size;
if((region_id = H5Ropen_object((H5R_ref_t *)mem, H5P_DEFAULT, H5P_DEFAULT)) < 0)
H5TOOLS_INFO("H5Ropen_object H5T_STD_REF failed");
else {
if((region_space = H5Ropen_region((H5R_ref_t *)mem, H5P_DEFAULT, H5P_DEFAULT)) >= 0) {
if (!h5tools_is_zero(mem, H5Tget_size(H5T_STD_REF))) {
region_type = H5Sget_select_type(region_space);
if(region_type == H5S_SEL_POINTS)
render_bin_output_region_points(region_space, region_id, stream, container);
else
render_bin_output_region_blocks(region_space, region_id, stream, container);
}
else {
H5TOOLS_INFO("H5Ropen_object H5T_STD_REF NULL");
}
H5Sclose(region_space);
} /* end if (region_space >= 0) */
H5Dclose(region_id);
}
}
} /* end if (region_output... */
}
else if (H5Tequal(tid, H5T_STD_REF_DSETREG)) {
/* if (size == H5R_DSET_REG_REF_BUF_SIZE) */
H5TOOLS_DEBUG("H5T_STD_REF_DSETREG");
}
else if (H5Tequal(tid, H5T_STD_REF_OBJ)) {
/* if (size == H5R_OBJ_REF_BUF_SIZE) */
H5TOOLS_DEBUG("H5T_STD_REF_OBJ");
}
}
break;
case H5T_TIME:
case H5T_OPAQUE:
H5TOOLS_DEBUG("H5T_OPAQUE");
for (block_index = 0; block_index < block_nelmts; block_index++) {
mem = ((unsigned char*)_mem) + block_index * size;
if (size != HDfwrite(mem, sizeof(char), size, stream))
H5TOOLS_THROW((-1), "fwrite failed");
} /* end for */
break;
case H5T_NO_CLASS:
case H5T_NCLASSES:
default:
/* Badness */
H5TOOLS_THROW((-1), "bad type class");
break;
} /* end switch */
CATCH
H5TOOLS_ENDDEBUG("");
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: render_bin_output_region_data_blocks
*
* Purpose: Print the data values from a dataset referenced by region blocks.
* This is a special case subfunction to print the data in a region reference of type blocks.
*
* Return: FAIL if there was an error
* SUCCEED otherwise
*
*-------------------------------------------------------------------------
*/
int
render_bin_output_region_data_blocks(hid_t region_id, FILE *stream,
hid_t container, unsigned ndims, hid_t type_id, hsize_t nblocks, hsize_t *ptdata)
{
hsize_t *dims1 = NULL;
hsize_t *start = NULL;
hsize_t *count = NULL;
hsize_t numelem;
hsize_t total_size[H5S_MAX_RANK];
unsigned jndx;
size_t type_size;
hid_t mem_space = H5I_INVALID_HID;
void *region_buf = NULL;
hbool_t past_catch = FALSE;
hsize_t blkndx;
hid_t sid1 = H5I_INVALID_HID;
int ret_value = -1;
H5TOOLS_START_DEBUG("");
/* Get the dataspace of the dataset */
if((sid1 = H5Dget_space(region_id)) < 0)
H5TOOLS_THROW((-1), "H5Dget_space failed");
/* Allocate space for the dimension array */
if((dims1 = (hsize_t *) HDmalloc(sizeof(hsize_t) * ndims)) == NULL)
H5TOOLS_THROW((-1), "Could not allocate buffer for dims");
/* find the dimensions of each data space from the block coordinates */
numelem = 1;
for (jndx = 0; jndx < ndims; jndx++) {
dims1[jndx] = ptdata[jndx + ndims] - ptdata[jndx] + 1;
numelem = dims1[jndx] * numelem;
}
/* Create dataspace for reading buffer */
if((mem_space = H5Screate_simple((int)ndims, dims1, NULL)) < 0)
H5TOOLS_THROW((-1), "H5Screate_simple failed");
if((type_size = H5Tget_size(type_id)) == 0)
H5TOOLS_THROW((-1), "H5Tget_size failed");
if((region_buf = HDmalloc(type_size * (size_t)numelem)) == NULL)
H5TOOLS_THROW((-1), "Could not allocate region buffer");
/* Select (x , x , ..., x ) x (y , y , ..., y ) hyperslab for reading memory dataset */
/* 1 2 n 1 2 n */
if((start = (hsize_t *) HDmalloc(sizeof(hsize_t) * ndims)) == NULL)
H5TOOLS_THROW((-1), "Could not allocate buffer for start");
if((count = (hsize_t *) HDmalloc(sizeof(hsize_t) * ndims)) == NULL)
H5TOOLS_THROW((-1), "Could not allocate buffer for count");
for (blkndx = 0; blkndx < nblocks; blkndx++) {
for (jndx = 0; jndx < ndims; jndx++) {
start[jndx] = ptdata[jndx + blkndx * ndims * 2];
count[jndx] = dims1[jndx];
}
if(H5Sselect_hyperslab(sid1, H5S_SELECT_SET, start, NULL, count, NULL) < 0)
H5TOOLS_GOTO_ERROR((-1), "H5Sselect_hyperslab failed");
if(H5Dread(region_id, type_id, mem_space, sid1, H5P_DEFAULT, region_buf) < 0)
H5TOOLS_GOTO_ERROR((-1), "H5Dread failed");
if(H5Sget_simple_extent_dims(mem_space, total_size, NULL) < 0)
H5TOOLS_GOTO_ERROR((-1), "H5Sget_simple_extent_dims failed");
if(render_bin_output(stream, container, type_id, (char*)region_buf, numelem) < 0)
H5TOOLS_GOTO_ERROR((-1), "render_bin_output of data region failed");
/* Render the region data element end */
done:
;
} /* end for (blkndx = 0; blkndx < nblocks; blkndx++) */
CATCH
HDfree(start);
HDfree(count);
HDfree(region_buf);
HDfree(dims1);
if(H5Sclose(mem_space) < 0)
H5TOOLS_ERROR((-1), "H5Sclose failed");
if(H5Sclose(sid1) < 0)
H5TOOLS_ERROR((-1), "H5Sclose failed");
H5TOOLS_ENDDEBUG("");
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: render_bin_output_region_blocks
*
* Purpose: Print some values from a dataset referenced by region blocks.
* This is a special case subfunction to dump a region reference using blocks.
*
* Return: False if ERROR
* True otherwise
*-------------------------------------------------------------------------
*/
hbool_t
render_bin_output_region_blocks(hid_t region_space, hid_t region_id,
FILE *stream, hid_t container)
{
hssize_t snblocks;
hsize_t nblocks;
hsize_t alloc_size;
hsize_t *ptdata = NULL;
int sndims;
unsigned ndims;
hid_t dtype = H5I_INVALID_HID;
hid_t type_id = H5I_INVALID_HID;
hbool_t past_catch = FALSE;
hbool_t ret_value = TRUE;
H5TOOLS_START_DEBUG("");
if((snblocks = H5Sget_select_hyper_nblocks(region_space)) <= 0)
H5TOOLS_THROW(FALSE, "H5Sget_select_hyper_nblocks failed");
nblocks = (hsize_t)snblocks;
/* Print block information */
if((sndims = H5Sget_simple_extent_ndims(region_space)) < 0)
H5TOOLS_THROW(FALSE, "H5Sget_simple_extent_ndims failed");
ndims = (unsigned)sndims;
alloc_size = nblocks * ndims * 2 * sizeof(ptdata[0]);
if((ptdata = (hsize_t*) HDmalloc((size_t) alloc_size)) == NULL)
H5TOOLS_GOTO_ERROR(FALSE, "Could not allocate buffer for ptdata");
if(H5Sget_select_hyper_blocklist(region_space, (hsize_t) 0, nblocks, ptdata) < 0)
H5TOOLS_GOTO_ERROR(FALSE, "H5Rget_select_hyper_blocklist failed");
if((dtype = H5Dget_type(region_id)) < 0)
H5TOOLS_GOTO_ERROR(FALSE, "H5Dget_type failed");
if((type_id = H5Tget_native_type(dtype, H5T_DIR_DEFAULT)) < 0)
H5TOOLS_GOTO_ERROR(FALSE, "H5Tget_native_type failed");
render_bin_output_region_data_blocks(region_id, stream, container, ndims, type_id, nblocks, ptdata);
done:
HDfree(ptdata);
if(type_id > 0 && H5Tclose(type_id) < 0)
H5TOOLS_ERROR(FALSE, "H5Tclose failed");
if(dtype > 0 && H5Tclose(dtype) < 0)
H5TOOLS_ERROR(FALSE, "H5Tclose failed");
H5_LEAVE(TRUE)
CATCH
H5TOOLS_ENDDEBUG("");
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: H5Tools Library
* Purpose: Print the data values from a dataset referenced by region points.
*
* Description:
* This is a special case subfunction to print the data in a region reference of type points.
*
* Return:
* The function returns FAIL on error, otherwise SUCCEED
*
* Parameters Description:
* h5tools_str_t *buffer is the string into which to render
* size_t ncols
* int ndims is the number of dimensions of the region element
* hssize_t npoints is the number of points in the region
*-------------------------------------------------------------------------
*/
int
render_bin_output_region_data_points(hid_t region_space, hid_t region_id,
FILE *stream, hid_t container,
unsigned ndims, hid_t type_id, hsize_t npoints)
{
hsize_t *dims1 = NULL;
size_t type_size;
hid_t mem_space = H5I_INVALID_HID;
void *region_buf = NULL;
int ret_value = 0;
H5TOOLS_START_DEBUG("");
if((type_size = H5Tget_size(type_id)) == 0)
H5TOOLS_GOTO_ERROR((-1), "H5Tget_size failed");
if((region_buf = HDmalloc(type_size * (size_t)npoints)) == NULL)
H5TOOLS_GOTO_ERROR((-1), "Could not allocate buffer for region");
/* Allocate space for the dimension array */
if((dims1 = (hsize_t *) HDmalloc(sizeof(hsize_t) * ndims)) == NULL)
H5TOOLS_GOTO_ERROR((-1), "Could not allocate buffer for dims");
dims1[0] = npoints;
if((mem_space = H5Screate_simple(1, dims1, NULL)) < 0)
H5TOOLS_GOTO_ERROR((-1), "H5Screate_simple failed");
if(H5Dread(region_id, type_id, mem_space, region_space, H5P_DEFAULT, region_buf) < 0)
H5TOOLS_GOTO_ERROR((-1), "H5Dread failed");
if(H5Sget_simple_extent_dims(region_space, dims1, NULL) < 0)
H5TOOLS_GOTO_ERROR((-1), "H5Sget_simple_extent_dims failed");
if(render_bin_output(stream, container, type_id, (char*)region_buf, npoints) < 0)
H5TOOLS_GOTO_ERROR((-1), "render_bin_output of data points failed");
done:
HDfree(region_buf);
HDfree(dims1);
if(H5Sclose(mem_space) < 0)
H5TOOLS_ERROR((-1), "H5Sclose failed");
H5TOOLS_ENDDEBUG("");
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: render_bin_output_region_points
*
* Purpose: Print some values from a dataset referenced by region points.
* This is a special case function to dump a region reference using points.
*
* Return: False if the last dimension has been reached
* True otherwise
*-------------------------------------------------------------------------
*/
hbool_t
render_bin_output_region_points(hid_t region_space, hid_t region_id,
FILE *stream, hid_t container)
{
hssize_t snpoints;
hsize_t npoints;
int sndims;
unsigned ndims;
hid_t dtype = H5I_INVALID_HID;
hid_t type_id = H5I_INVALID_HID;
hbool_t past_catch = FALSE;
hbool_t ret_value = TRUE;
H5TOOLS_START_DEBUG("");
if((snpoints = H5Sget_select_elem_npoints(region_space)) <= 0)
H5TOOLS_THROW(FALSE, "H5Sget_select_elem_npoints failed");
npoints = (hsize_t)snpoints;
/* Allocate space for the dimension array */
if((sndims = H5Sget_simple_extent_ndims(region_space)) < 0)
H5TOOLS_THROW(FALSE, "H5Sget_simple_extent_ndims failed");
ndims = (unsigned)sndims;
if((dtype = H5Dget_type(region_id)) < 0)
H5TOOLS_GOTO_ERROR(FALSE, "H5Dget_type failed");
if((type_id = H5Tget_native_type(dtype, H5T_DIR_DEFAULT)) < 0)
H5TOOLS_GOTO_ERROR(FALSE, "H5Tget_native_type failed");
render_bin_output_region_data_points(region_space, region_id, stream, container, ndims, type_id, npoints);
done:
if(type_id > 0 && H5Tclose(type_id) < 0)
H5TOOLS_ERROR(FALSE, "H5Tclose failed");
if(dtype > 0 && H5Tclose(dtype) < 0)
H5TOOLS_ERROR(FALSE, "H5Tclose failed");
H5_LEAVE(ret_value)
CATCH
H5TOOLS_ENDDEBUG("");
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: h5tools_is_zero
*
* Purpose: Determines if memory is initialized to all zero bytes.
*
* Return: TRUE if all bytes are zero
* FALSE otherwise
*-------------------------------------------------------------------------
*/
H5_ATTR_PURE hbool_t
h5tools_is_zero(const void *_mem, size_t size)
{
const unsigned char *mem = (const unsigned char *) _mem;
while (size-- > 0)
if (mem[size])
return FALSE;
return TRUE;
}
/*-------------------------------------------------------------------------
* Function: h5tools_is_obj_same
*
* Purpose: Check if two given object IDs or link names point to the same object.
*
* Parameters:
* hid_t loc_id1: location of the first object
* char *name1: link name of the first object.
* Use "." or NULL if loc_id1 is the object to be compared.
* hid_t loc_id2: location of the second object
* char *name1: link name of the first object.
* Use "." or NULL if loc_id2 is the object to be compared.
*
* Return: TRUE if it is the same object
* FALSE otherwise.
*-------------------------------------------------------------------------
*/
hbool_t
h5tools_is_obj_same(hid_t loc_id1, const char *name1,
hid_t loc_id2, const char *name2)
{
H5O_info2_t oinfo1, oinfo2;
hbool_t ret_val = FALSE;
if ( name1 && HDstrcmp(name1, "."))
H5Oget_info_by_name3(loc_id1, name1, &oinfo1, H5O_INFO_BASIC, H5P_DEFAULT);
else
H5Oget_info3(loc_id1, &oinfo1, H5O_INFO_BASIC);
if ( name2 && HDstrcmp(name2, "."))
H5Oget_info_by_name3(loc_id2, name2, &oinfo2, H5O_INFO_BASIC, H5P_DEFAULT);
else
H5Oget_info3(loc_id2, &oinfo2, H5O_INFO_BASIC);
if (oinfo1.fileno == oinfo2.fileno) {
int token_cmp_val;
H5Otoken_cmp(loc_id1, &oinfo1.token, &oinfo2.token, &token_cmp_val);
if(!token_cmp_val)
ret_val = TRUE;
}
return ret_val;
}
Reference in New Issue View Git Blame Copy Permalink