mirror of
https://github.com/HDFGroup/hdf5.git
synced 2024-11-27 02:10:55 +08:00
7ec079a515
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
1027 lines
34 KiB
Makefile
1027 lines
34 KiB
Makefile
# Makefile.in generated by automake 1.11 from Makefile.am.
|
|
# @configure_input@
|
|
|
|
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
|
|
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
|
|
# Inc.
|
|
# This Makefile.in is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
|
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
# PARTICULAR PURPOSE.
|
|
|
|
@SET_MAKE@
|
|
|
|
#
|
|
# Copyright by The HDF Group.
|
|
# Copyright by the Board of Trustees of the University of Illinois.
|
|
# All rights reserved.
|
|
#
|
|
# This file is part of HDF5. The full HDF5 copyright notice, including
|
|
# terms governing use, modification, and redistribution, is contained in
|
|
# the files COPYING and Copyright.html. COPYING can be found at the root
|
|
# of the source code distribution tree; Copyright.html can be found at the
|
|
# root level of an installed copy of the electronic HDF5 document set and
|
|
# is linked from the top-level documents page. It can also be found at
|
|
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
|
|
# access to either file, you may request a copy from help@hdfgroup.org.
|
|
#
|
|
# This makefile mostly just reinvokes make in the various subdirectories
|
|
# but does so in the correct order. You can alternatively invoke make from
|
|
# each subdirectory manually.
|
|
#
|
|
# Top-level HDF5 Makefile(.in)
|
|
|
|
# pmake has issues if variables are undefined. Solve this problem in
|
|
# top-level Makefile by defining .MAKEFLAGS target to -V before pmake can
|
|
# encounter any undefined variables.
|
|
# Automake resists putting anything but variable definitions first in
|
|
# a Makefile.in, so we'll put a placebo comment here and use sed in
|
|
# bin/reconfigure to turn it into the .MAKEFLAGS target. Sigh. -JL 2005
|
|
# Configure should set AM_MAKEFLAGS to -V to solve this problem in
|
|
# subdirectories.
|
|
# NOTE: This means that invoking pmake in a subdirectory will not work.
|
|
.MAKEFLAGS:@AM_MAKEFLAGS@
|
|
$(MAKE) all
|
|
|
|
VPATH = @srcdir@
|
|
pkgdatadir = $(datadir)/@PACKAGE@
|
|
pkgincludedir = $(includedir)/@PACKAGE@
|
|
pkglibdir = $(libdir)/@PACKAGE@
|
|
pkglibexecdir = $(libexecdir)/@PACKAGE@
|
|
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
|
|
install_sh_DATA = $(install_sh) -c -m 644
|
|
install_sh_PROGRAM = $(install_sh) -c
|
|
install_sh_SCRIPT = $(install_sh) -c
|
|
INSTALL_HEADER = $(INSTALL_DATA)
|
|
transform = $(program_transform_name)
|
|
NORMAL_INSTALL = :
|
|
PRE_INSTALL = :
|
|
POST_INSTALL = :
|
|
NORMAL_UNINSTALL = :
|
|
PRE_UNINSTALL = :
|
|
POST_UNINSTALL = :
|
|
build_triplet = @build@
|
|
host_triplet = @host@
|
|
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
|
|
$(srcdir)/Makefile.in $(top_srcdir)/config/commence.am \
|
|
$(top_srcdir)/configure COPYING bin/COPYING bin/compile \
|
|
bin/config.guess bin/config.sub bin/depcomp bin/install-sh \
|
|
bin/ltmain.sh bin/missing bin/mkinstalldirs
|
|
subdir = .
|
|
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
|
am__aclocal_m4_deps = $(top_srcdir)/configure.in
|
|
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
|
|
$(ACLOCAL_M4)
|
|
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
|
|
configure.lineno config.status.lineno
|
|
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
|
|
CONFIG_HEADER = $(top_builddir)/src/H5config.h
|
|
CONFIG_CLEAN_FILES =
|
|
CONFIG_CLEAN_VPATH_FILES =
|
|
SOURCES =
|
|
DIST_SOURCES =
|
|
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
|
|
html-recursive info-recursive install-data-recursive \
|
|
install-dvi-recursive install-exec-recursive \
|
|
install-html-recursive install-info-recursive \
|
|
install-pdf-recursive install-ps-recursive install-recursive \
|
|
installcheck-recursive installdirs-recursive pdf-recursive \
|
|
ps-recursive uninstall-recursive
|
|
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
|
|
distclean-recursive maintainer-clean-recursive
|
|
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
|
|
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
|
|
distdir dist dist-all distcheck
|
|
ETAGS = etags
|
|
CTAGS = ctags
|
|
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
|
|
distdir = $(PACKAGE)-$(VERSION)
|
|
top_distdir = $(distdir)
|
|
am__remove_distdir = \
|
|
{ test ! -d "$(distdir)" \
|
|
|| { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
|
|
&& rm -fr "$(distdir)"; }; }
|
|
am__relativize = \
|
|
dir0=`pwd`; \
|
|
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
|
|
sed_rest='s,^[^/]*/*,,'; \
|
|
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
|
|
sed_butlast='s,/*[^/]*$$,,'; \
|
|
while test -n "$$dir1"; do \
|
|
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
|
|
if test "$$first" != "."; then \
|
|
if test "$$first" = ".."; then \
|
|
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
|
|
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
|
|
else \
|
|
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
|
|
if test "$$first2" = "$$first"; then \
|
|
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
|
|
else \
|
|
dir2="../$$dir2"; \
|
|
fi; \
|
|
dir0="$$dir0"/"$$first"; \
|
|
fi; \
|
|
fi; \
|
|
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
|
|
done; \
|
|
reldir="$$dir2"
|
|
DIST_ARCHIVES = $(distdir).tar.gz
|
|
GZIP_ENV = --best
|
|
distuninstallcheck_listfiles = find . -type f -print
|
|
distcleancheck_listfiles = find . -type f -print
|
|
ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
|
|
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
|
|
AMTAR = @AMTAR@
|
|
|
|
# H5_CFLAGS holds flags that should be used when building hdf5,
|
|
# but which should not be exported to h5cc for building other programs.
|
|
# AM_CFLAGS is an automake construct which should be used by Makefiles
|
|
# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
|
|
AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
|
|
AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
|
|
AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
|
|
AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
|
|
AM_LDFLAGS = @AM_LDFLAGS@
|
|
AM_MAKEFLAGS = @AM_MAKEFLAGS@
|
|
AR = @AR@
|
|
|
|
# Set the paths for AFS installs of autotools for Linux machines
|
|
# Ideally, these tools should never be needed during the build.
|
|
AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
|
|
AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
|
|
AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
|
|
AWK = @AWK@
|
|
BYTESEX = @BYTESEX@
|
|
CC = @CC@
|
|
CCDEPMODE = @CCDEPMODE@
|
|
CC_VERSION = @CC_VERSION@
|
|
CFLAGS = @CFLAGS@
|
|
CLEARFILEBUF = @CLEARFILEBUF@
|
|
CODESTACK = @CODESTACK@
|
|
CONFIG_DATE = @CONFIG_DATE@
|
|
CONFIG_MODE = @CONFIG_MODE@
|
|
CONFIG_USER = @CONFIG_USER@
|
|
CPP = @CPP@
|
|
CPPFLAGS = @CPPFLAGS@
|
|
CXX = @CXX@
|
|
CXXCPP = @CXXCPP@
|
|
CXXDEPMODE = @CXXDEPMODE@
|
|
CXXFLAGS = @CXXFLAGS@
|
|
CYGPATH_W = @CYGPATH_W@
|
|
DEBUG_PKG = @DEBUG_PKG@
|
|
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
|
|
DEFS = @DEFS@
|
|
DEPDIR = @DEPDIR@
|
|
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
|
|
DIRECT_VFD = @DIRECT_VFD@
|
|
DSYMUTIL = @DSYMUTIL@
|
|
DUMPBIN = @DUMPBIN@
|
|
DYNAMIC_DIRS = @DYNAMIC_DIRS@
|
|
ECHO_C = @ECHO_C@
|
|
ECHO_N = @ECHO_N@
|
|
ECHO_T = @ECHO_T@
|
|
EGREP = @EGREP@
|
|
EXEEXT = @EXEEXT@
|
|
EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
|
|
|
|
# Make sure that these variables are exported to the Makefiles
|
|
F9XMODEXT = @F9XMODEXT@
|
|
F9XMODFLAG = @F9XMODFLAG@
|
|
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
|
|
FC = @FC@
|
|
FCFLAGS = @FCFLAGS@
|
|
FCFLAGS_f90 = @FCFLAGS_f90@
|
|
FCLIBS = @FCLIBS@
|
|
FGREP = @FGREP@
|
|
FILTERS = @FILTERS@
|
|
FSEARCH_DIRS = @FSEARCH_DIRS@
|
|
GPFS = @GPFS@
|
|
GREP = @GREP@
|
|
H5_CFLAGS = @H5_CFLAGS@
|
|
H5_CPPFLAGS = @H5_CPPFLAGS@
|
|
H5_CXXFLAGS = @H5_CXXFLAGS@
|
|
H5_FCFLAGS = @H5_FCFLAGS@
|
|
H5_LONE_COLON = @H5_LONE_COLON@
|
|
H5_VERSION = @H5_VERSION@
|
|
HADDR_T = @HADDR_T@
|
|
HAVE_DMALLOC = @HAVE_DMALLOC@
|
|
HDF5_HL = @HDF5_HL@
|
|
HDF5_INTERFACES = @HDF5_INTERFACES@
|
|
HDF_CXX = @HDF_CXX@
|
|
HDF_FORTRAN = @HDF_FORTRAN@
|
|
HID_T = @HID_T@
|
|
HL = @HL@
|
|
HL_FOR = @HL_FOR@
|
|
HSIZE_T = @HSIZE_T@
|
|
HSSIZE_T = @HSSIZE_T@
|
|
INSTALL = @INSTALL@
|
|
INSTALL_DATA = @INSTALL_DATA@
|
|
INSTALL_PROGRAM = @INSTALL_PROGRAM@
|
|
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
|
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
|
|
INSTRUMENT = @INSTRUMENT@
|
|
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
|
|
LD = @LD@
|
|
LDFLAGS = @LDFLAGS@
|
|
LIBOBJS = @LIBOBJS@
|
|
LIBS = @LIBS@
|
|
LIBTOOL = @LIBTOOL@
|
|
LINUX_LFS = @LINUX_LFS@
|
|
LIPO = @LIPO@
|
|
LL_PATH = @LL_PATH@
|
|
LN_S = @LN_S@
|
|
LTLIBOBJS = @LTLIBOBJS@
|
|
LT_STATIC_EXEC = @LT_STATIC_EXEC@
|
|
MAINT = @MAINT@
|
|
MAKEINFO = @MAKEINFO@
|
|
MKDIR_P = @MKDIR_P@
|
|
MPE = @MPE@
|
|
MPI_GET_SIZE = @MPI_GET_SIZE@
|
|
NM = @NM@
|
|
NMEDIT = @NMEDIT@
|
|
OBJDUMP = @OBJDUMP@
|
|
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
|
|
OBJEXT = @OBJEXT@
|
|
OTOOL = @OTOOL@
|
|
OTOOL64 = @OTOOL64@
|
|
PACKAGE = @PACKAGE@
|
|
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
|
|
PACKAGE_NAME = @PACKAGE_NAME@
|
|
PACKAGE_STRING = @PACKAGE_STRING@
|
|
PACKAGE_TARNAME = @PACKAGE_TARNAME@
|
|
PACKAGE_URL = @PACKAGE_URL@
|
|
PACKAGE_VERSION = @PACKAGE_VERSION@
|
|
PARALLEL = @PARALLEL@
|
|
PATH_SEPARATOR = @PATH_SEPARATOR@
|
|
PERL = @PERL@
|
|
PTHREAD = @PTHREAD@
|
|
RANLIB = @RANLIB@
|
|
ROOT = @ROOT@
|
|
RUNPARALLEL = @RUNPARALLEL@
|
|
RUNSERIAL = @RUNSERIAL@
|
|
R_INTEGER = @R_INTEGER@
|
|
R_LARGE = @R_LARGE@
|
|
SEARCH = @SEARCH@
|
|
SED = @SED@
|
|
SETX = @SETX@
|
|
SET_MAKE = @SET_MAKE@
|
|
SHELL = @SHELL@
|
|
SIZE_T = @SIZE_T@
|
|
STATIC_EXEC = @STATIC_EXEC@
|
|
STATIC_SHARED = @STATIC_SHARED@
|
|
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
|
|
STRIP = @STRIP@
|
|
TESTPARALLEL = @TESTPARALLEL@
|
|
THREADSAFE = @THREADSAFE@
|
|
TIME = @TIME@
|
|
TR = @TR@
|
|
TRACE_API = @TRACE_API@
|
|
UNAME_INFO = @UNAME_INFO@
|
|
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
|
|
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
|
|
USE_FILTER_NBIT = @USE_FILTER_NBIT@
|
|
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
|
|
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
|
|
USE_FILTER_SZIP = @USE_FILTER_SZIP@
|
|
USINGMEMCHECKER = @USINGMEMCHECKER@
|
|
VERSION = @VERSION@
|
|
WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
|
|
abs_builddir = @abs_builddir@
|
|
abs_srcdir = @abs_srcdir@
|
|
abs_top_builddir = @abs_top_builddir@
|
|
abs_top_srcdir = @abs_top_srcdir@
|
|
ac_ct_CC = @ac_ct_CC@
|
|
ac_ct_CXX = @ac_ct_CXX@
|
|
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
|
|
ac_ct_FC = @ac_ct_FC@
|
|
am__include = @am__include@
|
|
am__leading_dot = @am__leading_dot@
|
|
am__quote = @am__quote@
|
|
am__tar = @am__tar@
|
|
am__untar = @am__untar@
|
|
bindir = @bindir@
|
|
build = @build@
|
|
build_alias = @build_alias@
|
|
build_cpu = @build_cpu@
|
|
build_os = @build_os@
|
|
build_vendor = @build_vendor@
|
|
builddir = @builddir@
|
|
datadir = @datadir@
|
|
datarootdir = @datarootdir@
|
|
|
|
# Install directories that automake doesn't know about
|
|
docdir = $(exec_prefix)/doc
|
|
dvidir = @dvidir@
|
|
enable_shared = @enable_shared@
|
|
enable_static = @enable_static@
|
|
exec_prefix = @exec_prefix@
|
|
host = @host@
|
|
host_alias = @host_alias@
|
|
host_cpu = @host_cpu@
|
|
host_os = @host_os@
|
|
host_vendor = @host_vendor@
|
|
htmldir = @htmldir@
|
|
includedir = @includedir@
|
|
infodir = @infodir@
|
|
install_sh = @install_sh@
|
|
libdir = @libdir@
|
|
libexecdir = @libexecdir@
|
|
localedir = @localedir@
|
|
localstatedir = @localstatedir@
|
|
lt_ECHO = @lt_ECHO@
|
|
mandir = @mandir@
|
|
mkdir_p = @mkdir_p@
|
|
oldincludedir = @oldincludedir@
|
|
pdfdir = @pdfdir@
|
|
prefix = @prefix@
|
|
program_transform_name = @program_transform_name@
|
|
psdir = @psdir@
|
|
sbindir = @sbindir@
|
|
sharedstatedir = @sharedstatedir@
|
|
srcdir = @srcdir@
|
|
sysconfdir = @sysconfdir@
|
|
target_alias = @target_alias@
|
|
top_build_prefix = @top_build_prefix@
|
|
top_builddir = @top_builddir@
|
|
top_srcdir = @top_srcdir@
|
|
|
|
# Shell commands used in Makefiles
|
|
RM = rm -f
|
|
CP = cp
|
|
|
|
# Some machines need a command to run executables; this is that command
|
|
# so that our tests will run.
|
|
# We use RUNTESTS instead of RUNSERIAL directly because it may be that
|
|
# some tests need to be run with a different command. Older versions
|
|
# of the makefiles used the command
|
|
# $(LIBTOOL) --mode=execute
|
|
# in some directories, for instance.
|
|
RUNTESTS = $(RUNSERIAL)
|
|
|
|
# Libraries to link to while building
|
|
LIBHDF5 = $(top_builddir)/src/libhdf5.la
|
|
LIBH5TEST = $(top_builddir)/test/libh5test.la
|
|
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
|
|
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
|
|
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
|
|
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
|
|
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
|
|
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
|
|
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
|
|
|
|
# Scripts used to build examples
|
|
# If only shared libraries have been installed, have h5cc build examples with
|
|
# shared libraries instead of static libraries
|
|
H5CC = $(bindir)/h5cc
|
|
H5CC_PP = $(bindir)/h5pcc
|
|
H5FC = $(bindir)/h5fc
|
|
H5FC_PP = $(bindir)/h5pfc
|
|
H5CPP = $(bindir)/h5c++
|
|
|
|
# The trace script; this is used on source files from the C library to
|
|
# insert tracing macros.
|
|
TRACE = perl $(top_srcdir)/bin/trace
|
|
|
|
# .chkexe files are used to mark tests that have run successfully.
|
|
# .chklog files are output from those tests.
|
|
# *.clog are from the MPE option.
|
|
|
|
# Some files/directories generated during check that should be cleaned
|
|
CHECK_CLEANFILES = *.chkexe *.chklog *.clog *-tmp
|
|
@BUILD_PARALLEL_CONDITIONAL_FALSE@TESTPARALLEL_DIR =
|
|
|
|
# Define subdirectories to build.
|
|
# Add this directory to SUBDIRS so that examples get built after tools
|
|
# but before examples in extra interfaces (c++ and fortran).
|
|
# Since we're explicitly listing DIST_SUBDIRS, we also need to list
|
|
# directories that are only conditionally built (so that their Makefiles
|
|
# are cleaned as well).
|
|
# Note that `make clean' will not affect the examples or doc directories.
|
|
|
|
# Conditionals. These conditionals are defined during configure
|
|
# Define each variable to empty if it is not used to placate pmake
|
|
@BUILD_PARALLEL_CONDITIONAL_TRUE@TESTPARALLEL_DIR = testpar
|
|
@BUILD_CXX_CONDITIONAL_FALSE@CXX_DIR =
|
|
@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
|
|
@BUILD_FORTRAN_CONDITIONAL_FALSE@FORTRAN_DIR =
|
|
@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
|
|
@BUILD_HDF5_HL_CONDITIONAL_FALSE@HDF5_HL_DIR =
|
|
@BUILD_HDF5_HL_CONDITIONAL_TRUE@HDF5_HL_DIR = hl
|
|
SUBDIRS = src test $(TESTPARALLEL_DIR) tools . $(CXX_DIR) $(FORTRAN_DIR) \
|
|
$(HDF5_HL_DIR) perform
|
|
|
|
DIST_SUBDIRS = src test testpar tools . c++ fortran hl perform examples
|
|
|
|
# Some files generated during configure that should be cleaned
|
|
DISTCLEANFILES = config/stamp1 config/stamp2
|
|
all: all-recursive
|
|
|
|
.SUFFIXES:
|
|
am--refresh:
|
|
@:
|
|
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(am__configure_deps)
|
|
@for dep in $?; do \
|
|
case '$(am__configure_deps)' in \
|
|
*$$dep*) \
|
|
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
|
|
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
|
|
&& exit 0; \
|
|
exit 1;; \
|
|
esac; \
|
|
done; \
|
|
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
|
|
$(am__cd) $(top_srcdir) && \
|
|
$(AUTOMAKE) --foreign Makefile
|
|
.PRECIOUS: Makefile
|
|
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
|
|
@case '$?' in \
|
|
*config.status*) \
|
|
echo ' $(SHELL) ./config.status'; \
|
|
$(SHELL) ./config.status;; \
|
|
*) \
|
|
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
|
|
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
|
|
esac;
|
|
|
|
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
|
|
$(am__cd) $(srcdir) && $(AUTOCONF)
|
|
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
|
|
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
|
|
$(am__aclocal_m4_deps):
|
|
|
|
mostlyclean-libtool:
|
|
-rm -f *.lo
|
|
|
|
clean-libtool:
|
|
-rm -rf .libs _libs
|
|
|
|
distclean-libtool:
|
|
-rm -f libtool config.lt
|
|
|
|
# This directory's subdirectories are mostly independent; you can cd
|
|
# into them and run `make' without going through this Makefile.
|
|
# To change the values of `make' variables: instead of editing Makefiles,
|
|
# (1) if the variable is set in `config.status', edit `config.status'
|
|
# (which will cause the Makefiles to be regenerated when you run `make');
|
|
# (2) otherwise, pass the desired values on the `make' command line.
|
|
$(RECURSIVE_TARGETS):
|
|
@failcom='exit 1'; \
|
|
for f in x $$MAKEFLAGS; do \
|
|
case $$f in \
|
|
*=* | --[!k]*);; \
|
|
*k*) failcom='fail=yes';; \
|
|
esac; \
|
|
done; \
|
|
dot_seen=no; \
|
|
target=`echo $@ | sed s/-recursive//`; \
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
echo "Making $$target in $$subdir"; \
|
|
if test "$$subdir" = "."; then \
|
|
dot_seen=yes; \
|
|
local_target="$$target-am"; \
|
|
else \
|
|
local_target="$$target"; \
|
|
fi; \
|
|
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
|
|| eval $$failcom; \
|
|
done; \
|
|
if test "$$dot_seen" = "no"; then \
|
|
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
|
|
fi; test -z "$$fail"
|
|
|
|
$(RECURSIVE_CLEAN_TARGETS):
|
|
@failcom='exit 1'; \
|
|
for f in x $$MAKEFLAGS; do \
|
|
case $$f in \
|
|
*=* | --[!k]*);; \
|
|
*k*) failcom='fail=yes';; \
|
|
esac; \
|
|
done; \
|
|
dot_seen=no; \
|
|
case "$@" in \
|
|
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
|
|
*) list='$(SUBDIRS)' ;; \
|
|
esac; \
|
|
rev=''; for subdir in $$list; do \
|
|
if test "$$subdir" = "."; then :; else \
|
|
rev="$$subdir $$rev"; \
|
|
fi; \
|
|
done; \
|
|
rev="$$rev ."; \
|
|
target=`echo $@ | sed s/-recursive//`; \
|
|
for subdir in $$rev; do \
|
|
echo "Making $$target in $$subdir"; \
|
|
if test "$$subdir" = "."; then \
|
|
local_target="$$target-am"; \
|
|
else \
|
|
local_target="$$target"; \
|
|
fi; \
|
|
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|
|
|| eval $$failcom; \
|
|
done && test -z "$$fail"
|
|
tags-recursive:
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
|
|
done
|
|
ctags-recursive:
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
|
|
done
|
|
|
|
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
|
|
END { if (nonempty) { for (i in files) print i; }; }'`; \
|
|
mkid -fID $$unique
|
|
tags: TAGS
|
|
|
|
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
|
|
$(TAGS_FILES) $(LISP)
|
|
set x; \
|
|
here=`pwd`; \
|
|
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
|
|
include_option=--etags-include; \
|
|
empty_fix=.; \
|
|
else \
|
|
include_option=--include; \
|
|
empty_fix=; \
|
|
fi; \
|
|
list='$(SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
test ! -f $$subdir/TAGS || \
|
|
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
|
|
fi; \
|
|
done; \
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
|
|
END { if (nonempty) { for (i in files) print i; }; }'`; \
|
|
shift; \
|
|
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
|
|
test -n "$$unique" || unique=$$empty_fix; \
|
|
if test $$# -gt 0; then \
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
"$$@" $$unique; \
|
|
else \
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
$$unique; \
|
|
fi; \
|
|
fi
|
|
ctags: CTAGS
|
|
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
|
|
$(TAGS_FILES) $(LISP)
|
|
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
|
|
unique=`for i in $$list; do \
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
done | \
|
|
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
|
|
END { if (nonempty) { for (i in files) print i; }; }'`; \
|
|
test -z "$(CTAGS_ARGS)$$unique" \
|
|
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
|
|
$$unique
|
|
|
|
GTAGS:
|
|
here=`$(am__cd) $(top_builddir) && pwd` \
|
|
&& $(am__cd) $(top_srcdir) \
|
|
&& gtags -i $(GTAGS_ARGS) "$$here"
|
|
|
|
distclean-tags:
|
|
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
|
|
|
|
distdir: $(DISTFILES)
|
|
$(am__remove_distdir)
|
|
test -d "$(distdir)" || mkdir "$(distdir)"
|
|
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
|
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
|
list='$(DISTFILES)'; \
|
|
dist_files=`for file in $$list; do echo $$file; done | \
|
|
sed -e "s|^$$srcdirstrip/||;t" \
|
|
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
|
|
case $$dist_files in \
|
|
*/*) $(MKDIR_P) `echo "$$dist_files" | \
|
|
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
|
|
sort -u` ;; \
|
|
esac; \
|
|
for file in $$dist_files; do \
|
|
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
|
|
if test -d $$d/$$file; then \
|
|
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
|
|
if test -d "$(distdir)/$$file"; then \
|
|
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
|
|
fi; \
|
|
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
|
|
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
|
|
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
|
|
fi; \
|
|
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
|
|
else \
|
|
test -f "$(distdir)/$$file" \
|
|
|| cp -p $$d/$$file "$(distdir)/$$file" \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
test -d "$(distdir)/$$subdir" \
|
|
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
|
|
if test "$$subdir" = .; then :; else \
|
|
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
|
|
$(am__relativize); \
|
|
new_distdir=$$reldir; \
|
|
dir1=$$subdir; dir2="$(top_distdir)"; \
|
|
$(am__relativize); \
|
|
new_top_distdir=$$reldir; \
|
|
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
|
|
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
|
|
($(am__cd) $$subdir && \
|
|
$(MAKE) $(AM_MAKEFLAGS) \
|
|
top_distdir="$$new_top_distdir" \
|
|
distdir="$$new_distdir" \
|
|
am__remove_distdir=: \
|
|
am__skip_length_check=: \
|
|
am__skip_mode_fix=: \
|
|
distdir) \
|
|
|| exit 1; \
|
|
fi; \
|
|
done
|
|
-test -n "$(am__skip_mode_fix)" \
|
|
|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
|
|
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
|
|
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
|
|
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|
|
|| chmod -R a+r "$(distdir)"
|
|
dist-gzip: distdir
|
|
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
|
|
$(am__remove_distdir)
|
|
|
|
dist-bzip2: distdir
|
|
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
|
|
$(am__remove_distdir)
|
|
|
|
dist-lzma: distdir
|
|
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
|
|
$(am__remove_distdir)
|
|
|
|
dist-xz: distdir
|
|
tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
|
|
$(am__remove_distdir)
|
|
|
|
dist-tarZ: distdir
|
|
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
|
|
$(am__remove_distdir)
|
|
|
|
dist-shar: distdir
|
|
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
|
|
$(am__remove_distdir)
|
|
|
|
dist-zip: distdir
|
|
-rm -f $(distdir).zip
|
|
zip -rq $(distdir).zip $(distdir)
|
|
$(am__remove_distdir)
|
|
|
|
dist dist-all: distdir
|
|
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
|
|
$(am__remove_distdir)
|
|
|
|
# This target untars the dist file and tries a VPATH configuration. Then
|
|
# it guarantees that the distribution is self-contained by making another
|
|
# tarfile.
|
|
distcheck: dist
|
|
case '$(DIST_ARCHIVES)' in \
|
|
*.tar.gz*) \
|
|
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
|
|
*.tar.bz2*) \
|
|
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
|
|
*.tar.lzma*) \
|
|
unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
|
|
*.tar.xz*) \
|
|
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
|
|
*.tar.Z*) \
|
|
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
|
|
*.shar.gz*) \
|
|
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
|
|
*.zip*) \
|
|
unzip $(distdir).zip ;;\
|
|
esac
|
|
chmod -R a-w $(distdir); chmod a+w $(distdir)
|
|
mkdir $(distdir)/_build
|
|
mkdir $(distdir)/_inst
|
|
chmod a-w $(distdir)
|
|
test -d $(distdir)/_build || exit 0; \
|
|
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
|
|
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
|
|
&& am__cwd=`pwd` \
|
|
&& $(am__cd) $(distdir)/_build \
|
|
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
|
|
$(DISTCHECK_CONFIGURE_FLAGS) \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) check \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) install \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
|
|
distuninstallcheck \
|
|
&& chmod -R a-w "$$dc_install_base" \
|
|
&& ({ \
|
|
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
|
|
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
|
|
} || { rm -rf "$$dc_destdir"; exit 1; }) \
|
|
&& rm -rf "$$dc_destdir" \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) dist \
|
|
&& rm -rf $(DIST_ARCHIVES) \
|
|
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
|
|
&& cd "$$am__cwd" \
|
|
|| exit 1
|
|
$(am__remove_distdir)
|
|
@(echo "$(distdir) archives ready for distribution: "; \
|
|
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
|
|
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
|
|
distuninstallcheck:
|
|
@$(am__cd) '$(distuninstallcheck_dir)' \
|
|
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|
|
|| { echo "ERROR: files left after uninstall:" ; \
|
|
if test -n "$(DESTDIR)"; then \
|
|
echo " (check DESTDIR support)"; \
|
|
fi ; \
|
|
$(distuninstallcheck_listfiles) ; \
|
|
exit 1; } >&2
|
|
distcleancheck: distclean
|
|
@if test '$(srcdir)' = . ; then \
|
|
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
|
|
exit 1 ; \
|
|
fi
|
|
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|
|
|| { echo "ERROR: files left in build directory after distclean:" ; \
|
|
$(distcleancheck_listfiles) ; \
|
|
exit 1; } >&2
|
|
check-am: all-am
|
|
check: check-recursive
|
|
all-am: Makefile all-local
|
|
installdirs: installdirs-recursive
|
|
installdirs-am:
|
|
install: install-recursive
|
|
install-exec: install-exec-recursive
|
|
install-data: install-data-recursive
|
|
uninstall: uninstall-recursive
|
|
|
|
install-am: all-am
|
|
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
|
|
|
installcheck: installcheck-recursive
|
|
install-strip:
|
|
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
|
|
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
|
|
`test -z '$(STRIP)' || \
|
|
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
|
|
mostlyclean-generic:
|
|
|
|
clean-generic:
|
|
|
|
distclean-generic:
|
|
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
|
|
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
|
|
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
|
|
|
|
maintainer-clean-generic:
|
|
@echo "This command is intended for maintainers to use"
|
|
@echo "it deletes files that may require special tools to rebuild."
|
|
clean: clean-recursive
|
|
|
|
clean-am: clean-generic clean-libtool mostlyclean-am
|
|
|
|
distclean: distclean-recursive
|
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
|
|
-rm -f Makefile
|
|
distclean-am: clean-am distclean-generic distclean-libtool \
|
|
distclean-tags
|
|
|
|
dvi: dvi-recursive
|
|
|
|
dvi-am:
|
|
|
|
html: html-recursive
|
|
|
|
html-am:
|
|
|
|
info: info-recursive
|
|
|
|
info-am:
|
|
|
|
install-data-am:
|
|
|
|
install-dvi: install-dvi-recursive
|
|
|
|
install-dvi-am:
|
|
|
|
install-exec-am: install-exec-local
|
|
|
|
install-html: install-html-recursive
|
|
|
|
install-html-am:
|
|
|
|
install-info: install-info-recursive
|
|
|
|
install-info-am:
|
|
|
|
install-man:
|
|
|
|
install-pdf: install-pdf-recursive
|
|
|
|
install-pdf-am:
|
|
|
|
install-ps: install-ps-recursive
|
|
|
|
install-ps-am:
|
|
|
|
installcheck-am: installcheck-local
|
|
|
|
maintainer-clean: maintainer-clean-recursive
|
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
|
|
-rm -rf $(top_srcdir)/autom4te.cache
|
|
-rm -f Makefile
|
|
maintainer-clean-am: distclean-am maintainer-clean-generic
|
|
|
|
mostlyclean: mostlyclean-recursive
|
|
|
|
mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
|
|
mostlyclean-local
|
|
|
|
pdf: pdf-recursive
|
|
|
|
pdf-am:
|
|
|
|
ps: ps-recursive
|
|
|
|
ps-am:
|
|
|
|
uninstall-am: uninstall-local
|
|
|
|
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
|
|
install-am install-strip tags-recursive
|
|
|
|
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
|
|
all all-am all-local am--refresh check check-am clean \
|
|
clean-generic clean-libtool ctags ctags-recursive dist \
|
|
dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \
|
|
dist-xz dist-zip distcheck distclean distclean-generic \
|
|
distclean-libtool distclean-tags distcleancheck distdir \
|
|
distuninstallcheck dvi dvi-am html html-am info info-am \
|
|
install install-am install-data install-data-am install-dvi \
|
|
install-dvi-am install-exec install-exec-am install-exec-local \
|
|
install-html install-html-am install-info install-info-am \
|
|
install-man install-pdf install-pdf-am install-ps \
|
|
install-ps-am install-strip installcheck installcheck-am \
|
|
installcheck-local installdirs installdirs-am maintainer-clean \
|
|
maintainer-clean-generic mostlyclean mostlyclean-generic \
|
|
mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
|
|
tags-recursive uninstall uninstall-am uninstall-local
|
|
|
|
|
|
# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
|
|
# This tells the Makefiles that these targets are not files to be built but
|
|
# commands that should be executed even if a file with the same name already
|
|
# exists.
|
|
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
|
|
build-tests check-clean check-install check-p check-s check-vfd \
|
|
install-doc lib progs tests uninstall-doc _exec_check-s _test help
|
|
|
|
help:
|
|
@$(top_srcdir)/bin/makehelp
|
|
|
|
# Define rules for lib, progs, check, and tests.
|
|
# These simply involve recursing into subdirectories.
|
|
test _test: check
|
|
|
|
lib progs check-p check-s:
|
|
@@SETX@; for d in $(SUBDIRS); do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Make all, tests, and (un)install also recurse into perform directory
|
|
all-local:
|
|
@cd perform && $(MAKE) $(AM_MAKEFLAGS) all
|
|
|
|
tests:
|
|
@@SETX@; for d in $(SUBDIRS) perform; do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
install-exec-local:
|
|
@cd perform && $(MAKE) $(AM_MAKEFLAGS) install
|
|
uninstall-local:
|
|
@cd perform && $(MAKE) $(AM_MAKEFLAGS) uninstall
|
|
|
|
# Check-clean also recurses into examples directory
|
|
check-clean:
|
|
@@SETX@; for d in $(SUBDIRS) examples perform; do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
$(RM) -rf prefix-tmp destdir-tmp
|
|
|
|
# Some C++ compilers/linkers will create a directory named ii_files in
|
|
# the root directory, which should be cleaned.
|
|
mostlyclean-local:
|
|
if test -d ii_files; then \
|
|
$(RM) -rf ii_files; \
|
|
fi
|
|
|
|
# 'make install-all' also installs examples
|
|
install-all:
|
|
@$(MAKE) $(AM_MAKEFLAGS) install
|
|
@$(MAKE) $(AM_MAKEFLAGS) install-examples
|
|
uninstall-all:
|
|
@$(MAKE) $(AM_MAKEFLAGS) uninstall
|
|
@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
|
|
|
|
# Install examples in this directory and recursively
|
|
install-examples uninstall-examples:
|
|
@@SETX@; for d in examples $(HDF5_INTERFACES); do \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
done
|
|
|
|
# Placeholder to remind users that docs are now in a separate repository.
|
|
install-doc:
|
|
@echo "docs no longer live in this tree. Use install-examples to install examples."
|
|
|
|
uninstall-doc:
|
|
@echo "docs no longer live in this tree. Use install-examples to install examples."
|
|
|
|
# `make check-install' or `make installcheck' checks that examples can
|
|
# be successfully built
|
|
installcheck-local:
|
|
@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
|
|
|
|
# check-install is just a synonym for installcheck
|
|
check-install: installcheck
|
|
|
|
# check-all-install tests all installation methods.
|
|
# Install via different mechanism and then compare against the default.
|
|
# Fine if only libXXX.a files are different since they may have been ranlib'ed.
|
|
check-all-install:
|
|
@echo Installing to default location
|
|
$(MAKE) install
|
|
@echo Installing to different prefix location
|
|
$(MAKE) prefix=${ROOT}/prefix-tmp install
|
|
@echo Compare against the default installation.
|
|
@echo Fine if only libXXX.a files are different.
|
|
-diff -r prefix-tmp ${prefix}
|
|
@echo Installing to different $$\DESTDIR location
|
|
env DESTDIR=${ROOT}/destdir-tmp $(MAKE) install
|
|
@echo Compare against the default installation.
|
|
@echo Fine if only libXXX.a files are different.
|
|
-diff -r destdir-tmp${prefix} ${prefix}
|
|
|
|
# Only source files in the src directory include tracing information,
|
|
# so 'make trace' only needs to recurse into that directory.
|
|
trace:
|
|
@(cd src && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
|
|
|
|
# Run tests with different Virtual File Drivers.
|
|
# Currently, only invoke check-vfd in the test directory.
|
|
check-vfd:
|
|
@@SETX@; for d in src test; do \
|
|
if test $$d != .; then \
|
|
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
|
|
fi; \
|
|
done
|
|
|
|
# Automake wants to make config.status depend on configure. This
|
|
# makes sense, but config.status can't always be regenerated
|
|
# properly, which can cause builds to fail.
|
|
# This is a problem for our Daily Tests, which need to be able to
|
|
# 'make distclean' reliably before running configure.
|
|
# The simple solution is to override the dependency Automake supplies
|
|
# for config.status so that it will never be regenerated.
|
|
$(top_builddir)/config.status:
|
|
|
|
# Don't include conclude.am in root Makefile; tests target needs to
|
|
# recurse into perform directory as well as reguar subdirs.
|
|
|
|
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
|
# Otherwise a system limit (for SysV at least) may be exceeded.
|
|
.NOEXPORT:
|