hdf5/bin/buildhdf5
Albert Cheng 4c11f22b79 [svn-r10165] Purpose:
Updated the help page that install directory is no longer hardset.
2005-03-08 12:57:20 -05:00

319 lines
7.1 KiB
Bash
Executable File

#!/bin/sh
##
## Copyright by the Board of Trustees of the University of Illinois.
## All rights reserved.
##
## This file is part of HDF5. The full HDF5 copyright notice, including
## terms governing use, modification, and redistribution, is contained in
## the files COPYING and Copyright.html. COPYING can be found at the root
## of the source code distribution tree; Copyright.html can be found at the
## root level of an installed copy of the electronic HDF5 document set and
## is linked from the top-level documents page. It can also be found at
## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
##
# Build HDF5 library by doing configure, make, and tests.
# Usage: See USAGE()
# Programmer: Albert Cheng
# Creation date: Jul 9, 2003
# Some handy definitions
USAGE()
{
cat <<EOF
Buildhdf5 builds the HDF5 library by running configure, make and make check.
It skips the configure part if one has been done already. In effect, one
can continue from a previous build.
Command Syntax
==============
buildhdf5 [-config] [-gass] [-srcdir dir] config-arguments ...
-config: run configure only. [default to do build too]
-gass: configure for the GASS driver
-help: show this help page
-n: no execution, just show commands
-srcdir: use dir as the source directory
[Note: this is different from --srcdir
which will be passed to configure]
all other arguments are passed to configure
Configure in place or by srcdir
===============================
By default, the command looks for the configure command in
'.' and then '../hdf5'. When it finds it, it uses it to do
the configure part. In effect, if ./configure is found, it
does the build in place. If it finds ../hdf5/configure, it
does the --srcdir (that is separated source) build. Therefore,
if you have the following structure setup, you can run multiple
hosts building simultantously using a common source code.
hdf5_1.4/hdf5 # holds the source
.../arabica # for SunOS 2.7
.../arabicapp # for SunOS 2.7 parallel
.../burrwhite # for Linux 2.4
EOF
}
TIMESTAMP()
{
echo "=====" "`date`" "====="
}
QUIT()
{
TIMESTAMP
}
# Do one step bracketed with time stamps
# The '< /dev/null' is needed to prevent some applications like MPI
# jobs blocked for reading when they read stdin unnecessary.
STEP()
{
banner="$1"
command="$2"
resultfile="$3"
echo "$banner"
(TIMESTAMP; nerror=0 ;
echo "eval $command"
eval $command || nerror=1 ;
TIMESTAMP; exit $nerror) < /dev/null >> "$resultfile" 2>&1
if [ $? -ne 0 ]; then
echo "error in '$banner'. buildhdf5 aborted."
exit 1
fi
}
# Try locate the HDF4 library
# This is a hack because there is no consistent place to find
# the valid HDF library.
LOCATE_HDF4()
{
OS=`uname -s`
echo OS=$OS
case "$OS" in
HP-UX)
h4paths="/afs/ncsa/packages/hdf/HPUX_10.20"
;;
IRIX)
h4paths="/afs/ncsa/packages/hdf/4.1r3_irix"
;;
IRIX64)
case "$CC" in
*-n32)
h4paths="/afs/ncsa/packages/hdf/IRIX64-n32_6.5"
;;
*)
h4paths="/afs/ncsa/packages/hdf/IRIX64_6.5"
;;
esac
;;
Linux)
h4paths="/afs/ncsa/packages/hdf/linux"
;;
OSF1)
h4paths="/afs/ncsa/packages/hdf/OSF1_V4.0"
;;
*)
h4paths="/usr/ncsa /usr/sdt"
;;
esac
echo $h4paths
for h4 in $h4paths; do
if [ -f $h4/lib/libdf.a -a -f $h4/include/hdf.h ]; then
WITH_H4="--with-hdf4=$h4/include,$h4/lib"
break
fi
done
echo WITH_H4="$WITH_H4"
}
# Try locate the Fortran compiler
# This is a hack because there is no consistent fortran compiler name
LOCATE_FORTRAN()
{
OS=`uname -s`
echo OS=$OS
case "$OS" in
IRIX64)
case "$CC" in
*-n32)
gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
sslpaths=/usr/local/ssl-n32
;;
*)
gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
sslpaths=/usr/local/ssl
;;
esac
;;
*)
;;
esac
echo gasspaths=$gasspaths
echo $sslpaths=$sslpaths
for x in $gasspaths dummy; do
if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
WITH_GASS="--with-gass=$x/include,$x/lib"
break
fi
done
for x in $sslpaths dummy; do
if [ $x != dummy -a -f $x/lib/libssl.a ]; then
WITH_SSL="--with-ssl=$x/lib"
break
fi
done
echo WITH_GASS="$WITH_GASS"
echo WITH_SSL="$WITH_SSL"
}
# Try locate the GASS software library
# This is a hack because there is no consistent place to find
# the valid HDF library.
LOCATE_GASS()
{
OS=`uname -s`
echo OS=$OS
case "$OS" in
IRIX64)
case "$CC" in
*-n32)
gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
sslpaths=/usr/local/ssl-n32
;;
*)
gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
sslpaths=/usr/local/ssl
;;
esac
;;
*)
;;
esac
echo gasspaths=$gasspaths
echo $sslpaths=$sslpaths
for x in $gasspaths dummy; do
if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
WITH_GASS="--with-gass=$x/include,$x/lib"
break
fi
done
for x in $sslpaths dummy; do
if [ $x != dummy -a -f $x/lib/libssl.a ]; then
WITH_SSL="--with-ssl=$x/lib"
break
fi
done
echo WITH_GASS="$WITH_GASS"
echo WITH_SSL="$WITH_SSL"
}
# Configure. Default to do --srcdir.
CONFIG()
{
CMD="$SRCDIR/configure $*"
echo $CMD
if [ "$NOEXEC" != 'noexec' ]; then
$CMD
else
true # set exit code as 0
fi
}
# Main body
TIMESTAMP
trap QUIT 0
#
# setup
#
MAKE=${MAKE:-'gmake'}
export MAKE
CONFIGURE="CONFIG"
CONFIG_ONLY=no # default is configure and build
NOEXEC= # default to execute commands
SRCDIRLIST=". ../hdf5" # places to look for configure
nerror=0
# parse some options
while [ $# -gt 0 ]; do
case "$1" in
-config)
# do configure only
CONFIG_ONLY=yes
;;
-gass)
LOCATE_GASS
;;
-help)
USAGE
exit 0
;;
-n)
NOEXEC='noexec'
;;
-srcdir)
shift
SRCDIRLIST="$1"
;;
*) # Quit parsing
break
;;
esac
shift
done
# Figure out if srcdir is wished.
# Make sure we are at the library root level
# by checking couple typical files. Not bullet-proof.
for SRCDIR in $SRCDIRLIST dummy; do
if [ x-$SRCDIR = x-dummy ]; then
break
fi
if [ -d $SRCDIR/src -a -d $SRCDIR/config -a -f $SRCDIR/configure ]
then
break
fi
done
if [ x-$SRCDIR = x-dummy ]; then
echo "Could not find the source dir or configure script. Abort."
exit 1
fi
# Configure
# no configure if already done.
if [ ! -f config.status ]; then
CONFIGURE="$CONFIGURE $WITH_SSL $WITH_GASS"
STEP "Configure HDF5..." "$CONFIGURE $*" "#config"
else
STEP "Confiugre Skipped" "echo Confiugre Skipped" "#config"
fi
if [ x-$CONFIG_ONLY = x-yes ]; then
exit 0
fi
# Compile
STEP "Make HDF5..." "$MAKE" "#make"
# Tests
STEP "Testing HDF5..." "$MAKE check" "#test"
# all done
echo "No Errors encountered"
TIMESTAMP