mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2024-12-09 07:32:32 +08:00
Code Issues Packages Projects Releases Wiki Activity
4c5c484b99
hdf5/fortran/examples/Makefile.in
Scot Breitenfeld a9c065c5ce [svn-r21248] Mereged the F2003 branch into the trunk. 
Items merged: fortran directory, 
              src/libhdf5.settings.in 
              configure.in configure 
              MANIFEST

Tested: (all platforms used by daily tests, both with --enable-fortran and --enable-fortran2003)
2011-08-18 09:32:47 -05:00

924 lines
33 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
#
# HDF5-Fortran Examples Makefile(.in)
#
# We can't tell automake about example programs, because they need to be
# built using h5cc (or h5fc, etc.) instead of the standard compilers.
# This creates some extra work for us.
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/run-fortran-ex.sh.in $(srcdir)/testh5fc.sh.in \
$(top_srcdir)/config/commence.am \
$(top_srcdir)/config/conclude.am \
$(top_srcdir)/config/examples.am
# Add attention tests for Fortran 2003 features
@FORTRAN_2003_CONDITIONAL_F_TRUE@am__append_1 = rwdset_fortran2003 nested_derived_type \
@FORTRAN_2003_CONDITIONAL_F_TRUE@ compound_fortran2003 compound_complex_fortran2003
@FORTRAN_2003_CONDITIONAL_F_TRUE@am__append_2 = rwdset_fortran2003.f90 nested_derived_type.f90 \
@FORTRAN_2003_CONDITIONAL_F_TRUE@ compound_fortran2003.f90 compound_complex_fortran2003.f90
TESTS =
subdir = fortran/examples
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES = run-fortran-ex.sh testh5fc.sh
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@
# H5_CFLAGS holds flags that should be used when building hdf5,
# but which should not be exported to h5cc for building other programs.
# AM_CFLAGS is an automake construct which should be used by Makefiles
# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AS = @AS@
# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf
AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader
AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9
AWK = @AWK@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
CFLAGS = @CFLAGS@
CLEARFILEBUF = @CLEARFILEBUF@
CODESTACK = @CODESTACK@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CXX_VERSION = @CXX_VERSION@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
DIRECT_VFD = @DIRECT_VFD@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FC2003 = @FC2003@
FCFLAGS = @FCFLAGS@
FCFLAGS_f90 = @FCFLAGS_f90@
FCLIBS = @FCLIBS@
FC_VERSION = @FC_VERSION@
FGREP = @FGREP@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
GPFS = @GPFS@
GREP = @GREP@
H5_CFLAGS = @H5_CFLAGS@
H5_CPPFLAGS = @H5_CPPFLAGS@
H5_CXXFLAGS = @H5_CXXFLAGS@
H5_CXX_SHARED = @H5_CXX_SHARED@
H5_FCFLAGS = @H5_FCFLAGS@
H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
H5_LDFLAGS = @H5_LDFLAGS@
H5_LONE_COLON = @H5_LONE_COLON@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HAVE_DMALLOC = @HAVE_DMALLOC@
HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@
HDF5_HL = @HDF5_HL@
HDF5_INTERFACES = @HDF5_INTERFACES@
HDF_CXX = @HDF_CXX@
HDF_FORTRAN = @HDF_FORTRAN@
HDF_FORTRAN2003 = @HDF_FORTRAN2003@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT = @INSTRUMENT@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LARGEFILE = @LARGEFILE@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LL_PATH = @LL_PATH@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPE = @MPE@
MPI_GET_SIZE = @MPI_GET_SIZE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SED = @SED@
SETX = @SETX@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIZE_T = @SIZE_T@
STATIC_EXEC = @STATIC_EXEC@
STATIC_SHARED = @STATIC_SHARED@
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
THREADSAFE = @THREADSAFE@
TIME = @TIME@
TR = @TR@
TRACE_API = @TRACE_API@
UNAME_INFO = @UNAME_INFO@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
USINGMEMCHECKER = @USINGMEMCHECKER@
VERSION = @VERSION@
WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_FC = @ac_ct_FC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
# Install directories that automake doesn't know about
docdir = $(exec_prefix)/doc
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNEXEC instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command. Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNEXEC = $(RUNSERIAL)
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
# has been removed. According to the official description of DESTDIR by Gnu at
# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
# prepended to the normal and complete install path that it precedes for the
# purpose of installing in a temporary directory which is useful for building
# rpms and other packages. The '/' after ${DESTDIR} will be followed by another
# '/' at the beginning of the normal install path. When DESTDIR is empty the
# path then begins with '//', which is incorrect and causes problems at least for
# Cygwin.
# Scripts used to build examples
# If only shared libraries have been installed, have h5cc build examples with
# shared libraries instead of static libraries
H5CC = ${DESTDIR}$(bindir)/h5cc
H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
H5FC = ${DESTDIR}$(bindir)/h5fc
H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
H5CPP = ${DESTDIR}$(bindir)/h5c++
ACLOCAL_AMFLAGS = "-I m4"
# The trace script; this is used on source files from the C library to
# insert tracing macros.
TRACE = perl $(top_srcdir)/bin/trace
# .chkexe files are used to mark tests that have run successfully.
# .chklog files are output from those tests.
# *.clog are from the MPE option.
CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5
# Compile parallel fortran examples only if parallel is enabled
@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = ph5example
# These are the programs that 'make all' or 'make tests' will build and
# that 'make check' will run. List them in the order in which they should
# be run.
# We don't tell automake about these programs so that it doesn't try to
# compile them with the regular fortran compiler.
TEST_PROG = dsetexample fileexample rwdsetexample attrexample \
groupexample grpsexample grpdsetexample hyperslab selectele \
grpit refobjexample refregexample mountexample compound \
$(am__append_1)
# List files to be installed here
INSTALL_FILES = dsetexample.f90 fileexample.f90 rwdsetexample.f90 \
attrexample.f90 groupexample.f90 grpsexample.f90 \
grpdsetexample.f90 hyperslab.f90 selectele.f90 grpit.f90 \
refobjexample.f90 refregexample.f90 mountexample.f90 \
compound.f90 ph5example.f90 $(am__append_2)
INSTALL_SCRIPT_FILES = run-fortran-ex.sh
TEST_SCRIPT = testh5fc.sh
# Mark this directory as part of the Fortran API
FORTRAN_API = yes
# Tell automake how to install examples
# Note: no '/' after DESTDIR. Explanation in commence.am
EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/fortran
# Assume that all tests in this directory are examples, and tell
# conclude.am when to build them.
EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG)
EXTRA_PROG = $(EXAMPLE_PROG)
# We need to tell automake what to clean
MOSTLYCLEANFILES = *.raw *.meta *.o
CLEANFILES = $(TEST_PROG) $(TEST_PROG_PARA)
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fortran/examples/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign fortran/examples/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
run-fortran-ex.sh: $(top_builddir)/config.status $(srcdir)/run-fortran-ex.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
testh5fc.sh: $(top_builddir)/config.status $(srcdir)/testh5fc.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-data-local
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am: installcheck-local
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
mostlyclean-local
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-local
.MAKE: check-am install-am install-strip
.PHONY: all all-am all-local check check-TESTS check-am clean \
clean-generic clean-libtool distclean distclean-generic \
distclean-libtool distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-data-local install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installcheck-local installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
pdf-am ps ps-am uninstall uninstall-am uninstall-local
# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
# This tells the Makefiles that these targets are not files to be built but
# commands that should be executed even if a file with the same name already
# exists.
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
build-tests check-clean check-install check-p check-s check-vfd \
install-doc lib progs tests uninstall-doc _exec_check-s _test help
help:
@$(top_srcdir)/bin/makehelp
# Some examples depend on files created by other examples.
grpdsetexample.chkexe_: grpsexample.chkexe_
refregexample.chkexe_: refobjexample.chkexe_
# rwdsetexample and attrexample both modify the same file created by
# dsetexample. Serialize them.
rwdsetexample.chkexe_: dsetexample.chkexe_
attrexample.chkexe_: rwdsetexample.chkexe_
# Tell automake how to build examples using h5fc
# Additional dependencies for the examples are listed below
@BUILD_PARALLEL_CONDITIONAL_TRUE@$(EXTRA_PROG): $(H5FC_PP)
@BUILD_PARALLEL_CONDITIONAL_TRUE@ $(H5FC_PP) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
@BUILD_PARALLEL_CONDITIONAL_FALSE@$(EXTRA_PROG): $(H5FC)
@BUILD_PARALLEL_CONDITIONAL_FALSE@ $(H5FC) $(H5CCFLAGS) $(FCFLAGS) -o $@ $(srcdir)/$@.f90;
# List dependencies for each example. Normally, automake would take
# care of this for us, but if we tell automake about the programs it
# will try to build them with the normal C compiler, not h5cc. This is
# an inelegant way of solving the problem.
# All programs share the same build rule and a dependency on the main hdf5
# and fortran libraries above.
dsetexample: dsetexample.f90
fileexample: fileexample.f90
rwdsetexample: rwdsetexample.f90
attrexample: attrexample.f90
groupexample: groupexample.f90
grpsexample: grpsexample.f90
grpdsetexample: grpdsetexample.f90
hyperslab: hyperslab.f90
selectele: selectele.f90
grpit: grpit.f90
refobjexample: refobjexample.f90
refregexample: refregexample.f90
mountexample: mountexample.f90
compound: compound.f90
ph5example: ph5example.f90
@FORTRAN_2003_CONDITIONAL_F_TRUE@rwdset_fortran2003: rwdset_fortran2003.f90
@FORTRAN_2003_CONDITIONAL_F_TRUE@nested_derived_type: nested_derived_type.f90
@FORTRAN_2003_CONDITIONAL_F_TRUE@compound_fortran2003: compound_fortran2003.f90
@FORTRAN_2003_CONDITIONAL_F_TRUE@compound_complex_fortran2003: compound_complex_fortran2003.f90
# How to create EXAMPLEDIR if it doesn't already exist
$(EXAMPLEDIR):
-$(top_srcdir)/bin/mkdirs $@
$(EXAMPLETOPDIR):
-$(top_srcdir)/bin/mkdirs $@
# Install and uninstall rules. We install the source files, not the
# example programs themselves.
install-data-local:
@$(MAKE) $(AM_MAKEFLAGS) install-examples
uninstall-local:
@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
@for f in X $(INSTALL_FILES); do \
if test $$f != X; then \
(set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1); \
chmod a-x $(EXAMPLEDIR)/$$f; \
fi; \
done
@for f in X $(INSTALL_SCRIPT_FILES); do \
if test $$f != X; then \
(set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\
fi; \
done
@for f in X $(INSTALL_TOP_SCRIPT_FILES); do \
if test $$f != X; then \
(set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \
fi; \
done
uninstall-examples:
@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \
set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES); \
fi
@if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then \
set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES); \
fi
@if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then \
set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES); \
fi
installcheck-local:
@if test "$(STATIC_SHARED)" = "static, shared"; then \
H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \
$(MAKE) $(AM_MAKEFLAGS) clean; \
H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check; \
elif test "$(STATIC_SHARED)" = "shared"; then \
H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \
else \
$(MAKE) $(AM_MAKEFLAGS) check; \
fi
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(TESTS)
# General rule for recursive building targets.
# BUILT_SOURCES contain targets that need to be built before anything else
# in the directory (e.g., for Fortran type detection)
lib progs tests check-s check-p :: $(BUILT_SOURCES)
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# General rule for recursive cleaning targets. Like the rule above,
# but doesn't require building BUILT_SOURCES.
check-clean ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
# UPDATE: docs no longer reside in this build tree, so this target
# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
# clean up files generated by tests so they can be re-run.
build-check-clean:
$(RM) -rf $(CHECK_CLEANFILES)
# run check-clean whenever mostlyclean is run
mostlyclean-local: build-check-clean
# check-install is just a synonym for installcheck
check-install: installcheck
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test:
@$(MAKE) build-check-s
@$(MAKE) build-check-p
# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
tname=$(@:.chkexe_=)$(EXEEXT);\
log=$(@:.chkexe_=.chklog); \
echo "============================"; \
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
echo "No need to test $${tname} again."; \
else \
echo "============================" > $${log}; \
if test "X$(FORTRAN_API)" = "Xyes"; then \
echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
elif test "X$(CXX_API)" = "Xyes"; then \
echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
else \
echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
fi; \
echo "============================" >> $${log}; \
srcdir="$(srcdir)" \
$(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
(cat $${log} && false) || exit 1; \
echo "" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
echo "============================" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
cat $${log}; \
fi; \
fi
# The dummysh.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
cmd=$(@:.chkexe_=);\
tname=`basename $$cmd`;\
chkname=`basename $(@:.chkexe_=.chkexe)`;\
log=`basename $(@:.chkexe_=.chklog)`; \
echo "============================"; \
if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
echo "No need to test $${tname} again."; \
else \
echo "============================" > $${log}; \
if test "X$(FORTRAN_API)" = "Xyes"; then \
echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
elif test "X$(CXX_API)" = "Xyes"; then \
echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
else \
echo "Testing $${tname} $(TEST_FLAGS)"; \
echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
fi; \
echo "============================" >> $${log}; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
$(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
&& touch $${chkname} || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
(cat $${log} && false) || exit 1; \
echo "" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
echo "============================" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
cat $${log}; \
fi; \
echo "============================"; \
fi
# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(TESTS)
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
RUNEXEC="$(RUNPARALLEL)" || exit 1; \
fi; \
done
@for test in $(TEST_SCRIPT_PARA) dummy; do \
if test $$test != dummy; then \
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
fi; \
done
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd: $(LIB) $(PROGS) $(TESTS)
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
$(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \
HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink