Fix Bug1672 - Display garbage value on LE machine for BE data.
Description:
Casuing by calling diff_dataset twice when -r or no option was given.
Change to call it once which fix the problem.
It also improves the performance. (diffing time in half)
According further test, it also occurred on BE machine as well and it
seems occruing only with the BE data attached to Bugzilla.
Don't know how the file was created. Anyway this fix will prevent
from diffing with garbage values in similiar potential case.
Tested on:
linux32 (jam) , linux64 (almani), solaris (linew)
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
The ph5diff tests printout incorrectly reporting they are running
h5diff when it actually is running ph5diff.
Fixed.
Tested: Jam (parallel), linew (serial)
No H5committest since it is a shell script and Jam tests both
serial and parallel h5diff for Linux while Linew tests Big
endian platform.
" Use "--use-system-epsilon" for system EPSILON
" Use "-p" or "-d" for whatever user's choice of epsilon
" Use "-p 0" or "-d 0" for strict equality (same as default)
Updating autotools
Description:
Installed new autotools and used them to reconfigure HDF5.
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
Tested:
Tested on machines jam, smirom, liberty, linew.
Tested w/ features c++, fortran, parallel.
Tested w/ compilers gcc, pgcc, icc.
Further testing via Daily Tests should catch any other outliers. Upon
passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
Fix BZ #1583
Description:
The --enable-static-exec flag was broken. Configure was adding the
-all-static linker flag to an environment variable which was subsequently
never used. (looks like it was used in 1.6 Makefile.ins, but never
moved to 1.8's Makefile.ams when we added automake support).
To fix, I've added this environment varibale to the link lines of all the
tools. Now, when --enable-static-exec is invoked, it will correctly
generate statically linked executables in the installed bin directory.
Tested:
I've tested manually to ensure that the generated execs are static when
the flag is used and dynamic when not. I've also tested when szip is
used, as this was a use case mentioned in the bug report.
Also: ran full tests with make check on jam and smirom for good measure.
this error
home/hdftest/snapshots-hdf5/current/tools/lib/h5tools_ref.c:126: undefined reference to `d_status'
happens because the original developer of h5tools_ref.c declared these 2 variables in that source file
extern char *progname;
extern int d_status;
this means that all programs that use this source file (typically all tools) will have to define these 2 variables, even if they are *not* used.
examples
const char *progname = "h5jam";
int d_status = EXIT_SUCCESS;
"progname" is usually used to print the program name in the usage, and "d_status" is just a return value of the tool, usually.
I was wondering about removing these 2 declarations from h5tools_ref.c
extern char *progname;
extern int d_status;
and define those variables on each tool if they are only needed (it seems to me that only h5ls and h5dump actually "need" them)
tested: smirom parallel
The file used for input is located in the common source tools for testfiles, in tools/testfiles
Modified the h5repack shell script to read files from this location (h5repack reads its input files from a dedicated testfiles location in h5repack/testfiles)
Changed the h5diff open file call to use h5tools_fopen, so that it can open all file drivers
Tested: windows, linux, solaris
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Re-generated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
ISSUE : the tools use the following formula to read by hyperslabs: hyperslab_size[i] = MIN( dim_size[i], H5TOOLS_BUFSIZE / datum_size) where H5TOOLS_BUFSIZE is a constant defined of 1024K. This is OK as long as the datum_size does not exceed 1024K, otherwise we have a hyperslab size of 0 (since 1024K/(greater than 1024K) = 0). This affects h5dump. h5repack, h5diff
SOLUTION: add a check for a 0 size and define as 1 if so.
TEST FOR H5DUMP: Defined a case in the h5dump test generator program of such a type (an array type of doubles with a large array dimension, that was the case the user reported). Since the written file commited in svn would be around 1024K, opted for not writing the data (the part of the code where the hyperslab is defined is executed, since h5dump always reads the files). Defined a macro WRITE_ARRAY to enable such writing if needed. Added a run on the h5dump shell script. Added 2 new files to svn: tools/testfiles/tarray8.ddl, tools/testfiles/tarray8.h5. NOTE: while doing this I thought of adding this dataset case to an existing file, but that would add the large array output to those files (the ddls). The issue is that the file list is increasing.
TEST FOR H5DIFF: for h5diff the check for reading by hyperslabs is H5TOOLS_MALLOCSIZE (128 * H5TOOLS_BUFSIZE) or 128 Mb. This makes it not possible to add such a file to svn, so used the same method as h5dump (only write the dataset if WRITE_ARRAY is defined). As opposed to h5dump, the hyperslab code is NOT executed when the dataset is empty (dataset is not read). Added the new dataset to existing files and shell run (tools/h5diff/testfiles/h5diff_dset1.h5 and tools/h5diff/testfiles/h5diff_dset2.h5 and output in tools/h5diff/testfiles/h5diff_80.txt).
TEST FOR H5REPACK: similar issue as h5diff with the difference that the hyperslab code is run. Added a run to the shell script (with a filter, otherwise the code uses H5Ocopy).
tested: linux (h5commitest failed , apparently it did not detect the code changes in /tools/lib that fix the bug: the error in an assertion in the hyperslab of 0. I am sure that making h5ccomitest --distclean will detect the new code , but don't want to wait more 3 hours :-) )
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
Remove another call to H5E_clear_stack() from within the library.
Clean up lots of compiler warnings.
Tested on:
Mac OS X/32 10.5.6 (amazon)
(followup on other platforms forthcoming)
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Solution: for compound types, recursively apply that check
Two new cases are added
1) the compound type has a different number of members. Message printed is
<obj1> has X members <obj2> has Y members
Where X and Y are the number of members of each compound type being compared
2) the compound type has not comparable types (for example a double and an int at the same index)
In this case the message
Comparison not possible: object1 is of class1 and object2 is of class2
Is replaced with
Comparison not possible: object1 has a class1 and object2 has a class2
Modified the test generator program to have these 2 cases
Added a shell run for these 2 cases
Tested: windows, h5committest
-N, --nan Avoid NaNs detection
Note: there is no shell script run for datasets with NaN because the output is non portable (different results and NaN strings for different systems)
Tested: windows, linux
PG compiler complains about array out of bounds (a rank of zero was not checked)
Adding a scalar dataset to the test generator program. this case is run on a previous existing run, the case was added to 2 existing files
Tested: windows, linux
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Summary: when using h5diff to compare the results of h5repack (or other tools that copy one HDF5 file to another), a new option is needed to allow h5diff to make an "absolute" comparison of the 2 files. This is the "contents" mode explained in the usage below.
If this mode is present, objects in both files must match (must be exactly the same). If this does not happen, the tool returns an error code of 1 (instead of the success code of 0)
Changes to the h5repack test script: the call to h5diff was changed to include -c (maintaining the previous -q).
tested: windows, linux, solaris
The name of the files are now given by its full name relative to $srcdir
To avoid the printing of the complete full path of the test file, that hides
all the other parameters for long paths, the printing of the command line
is done first in TESTING with the name only of the test file, not its full path
the printing in the expected output that had the file name was removed as well as 3 tests that tested error messages in which the file name was present
tested: linux (in 2 different build directories relative to $srcdir), solaris
bug fixes.
Description:
Added code to create an empty hdf5 (named h5diff_empty.h5) in order to test
if h5diff compares correctly an empty hdf5 vs. a non-empty one.
Tested:
Tested in kagiso of h5diffgentest itself.
Verified by h5dump that h5diff_empty.h5 was indeed empty.
Then "h5diff h5diff_empty.h5 h5diff_basic1.h5" returned 0 (should have
returned non-zero).
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
