----------------------
./src/H5.c
Fixed more dependency problems in H5_term_library(). There was
a bug in the previous version that could cause the wrong EOF
marker to be written to the boot block under certain
circumstances. Hopefully this fixes it although I don't ready
access to a test case (Mark Miller will test it).
./src/H5F.c
./src/H5Fprivate.h
Added an H5F_close_all() that is similar to
H5F_term_interface() but which doesn't close the
interface. Files that don't have open object headers are
closed, others are delayed until all object headers close. All
files are flushed.
./src/H5ACprivate.h
./src/H5Bprivate.h
./src/H5Dprivate.h
./src/H5Eprivate.h
./src/H5Fprivate.h
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5HGprivate.h
./src/H5HLprivate.h
./src/H5Iprivate.h
./src/H5MFprivate.h
./src/H5MMprivate.h
./src/H5Oprivate.h
./src/H5Pprivate.h
./src/H5Ppublic.h
./src/H5RAprivate.h
./src/H5Sprivate.h
./src/H5Spublic.h
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5Vprivate.h
./src/H5Zprivate.h
./src/H5private.h
./src/H5public.h
Reindented after __DLL__ was added.
----------------------
./tools/h5tools.c
Strings are not converted to null-padding before being
printed; they are printed with whatever byte values appear in
the file.
./tools/h5ls.c
Now able to display attribute data type and data.
Added a `-f' or `--full' switch which causes the full name of
each object to be displayed instead of just the base name.
Added a `-r' or `--recursive' switch that recursively prints
the contents of groups, avoiding cycles.
More bulletproofing for non-printable characters in things
like object names, attribute names, and comment strings. We
don't want listing a file to send termal escape sequences
because it's sometimes possible to execute commands that way.
Since h5ls doesn't usually use quotes around object names we
must sometimes escape space characters.
External files are listed in a table to make the output less
confusing.
./tools/h5tools.c
./tools/h5tools.h
Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also
make h5dump_fixtype() public.
./test/dtypes.c
Wrote some data to an attribute to test h5ls attribute
printing.
./src/H5ACprivate.h
./src/H5Apublic.h
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5Epublic.h
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gprivate.h
./src/H5HLprivate.h
./src/H5Oprivate.h
./src/H5Ppublic.h
./src/H5RApublic.h
./src/H5Rpublic.h
./src/H5Spublic.h
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5Vprivate.h
./src/H5Zpublic.h
./src/H5private.h
./src/H5public.h
Reindented function prototypes after `HDF5API' was added. Also
rewrapped long lines.
./src/H5Flow.c
Added an `#ifdef WIN32' around an unused variable.
./src/H5api_adpt.h
Removed extra carriage returns inserted by "broken" operating
system.
./src/H5Dprivate.h
./src/H5Oprivate.h
./src/H5Vprivate.h
./src/H5private.h
Removed extraneous inclusion of H5api_adpt.h since it's
included in H5public.h which is included by everything.
./src/Makefile.in
Added H5api_adpt.h to the list of public header files to fix
broken `make install'.
----------------------
./INSTALL
Added warning that enabling debugging code can adversely
affect performance even when the debugging isn't turned on at
run-time. Performance testing shows that under certain
circumstances (like data type conversions of compound types)
the H5_timer functions, although only a few lines each,
contribute a fairly large percent to the execution time.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Improved the H5Tunregister() function to make unregistering
more flexible. It takes the same arguments as H5Tregister()
but also accepts wild cards. All conversion functions that
match the H5Tunregister() search criteria are removed from the
global type conversion table.
The H5Tregister_hard() and H5Tregister_soft() were combined
into a single function called H5Tregister() which is the
counterpart to H5Tunregister(). A new `persistence' argument
was added to differentiate between the two types of conversion
functions.
The application is allowed to register a hard conversion
function for the no-op conversion path although the library
isn't obligated to call it (it usually does). This is mostly
for completeness, but the application might use it to help
determine if the raw data pipeline was able to use the
optimized path for the case when no type conversion is
necessary. The library doesn't allow this path to be
unregistered although the application can redefine it as often
as it likes.
Fixed the type conversion tables in preparation for MT-safety
and to fix previosly-known design bugs wrt. unregistering
conversion functions or changing the C function associated
with a conversion path. The MT-safety stuff is documented in a
separate white paper.
Increased the conversion function debugging name from 9
characters to 31 characters so the output can be more
descriptive.
Moved conversion path statistics from the H5T_cdata_t member
into the conversion path itself. This makes H5T_cdata_t
contain only application-visible data structures.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
Improved the way type conversion functions are called so the
caller doesn't have to check for data type debugging and
increment type conversion timers and statistics.
Changed check for no-op conversion since it is now
application-definable and there may even be more than one
definition at a time in a multi-threaded application (one
thread might be using the no-op conversion path when some
other thread changes its definition -- the first thread still
sees the original defintion until it's done with the
operation).
./doc/html/Datatypes.html
Updated the user guide to reflect the changes to data type
conversion registration functions.
./bin/trace
./src/H5.c
Added tracing support for the new H5T_pers_t data type.
./test/dtypes.c
Added printf to display alignment value if non-aligned data
types are being tested.
./test/h5test.c
Modified the H5Tunregister() calls to use the new
arguments. All 94 of those calls can be replaced by a single
call to the new H5Tunregister() function.
./src/H5.c
Added HAVE_GETTIMEOFDAY around an auto variable and
initialized the elapsed time to zero when gettimeofday() is
not available.
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
Added an H5*_init() functions which do the same thing as
H5*_init_interface() but can be called from other packages and
don't do anything if the interface is already initialized.
This fixes a couple memory leaks in applications that
repeatedly close and open the library with H5close().
./src/H5Tconv.c
Optimized some data alignment code in the hardware conversion
functions.
Hardware conversions accumulate statistics about source and
destination data alignment and print that information when the
conversion function is unregistered (usually when the
application exits) if data type debugging is compiled into the
library and enabled at run-time.
The conversion caching was cleaned up for the compound data
type conversion function. It now caches conversion paths in a
manner that will be MT-safe and is much simpler than the old
method. Also cleaned up some array index maps.
./src/H5detect.c
Fixd mispelling of alingemnt.
./src/H5private.h
Changed `TRUE' to `1' in assignment to interface_initialize_g
in FUNC_ENTER macro definition.
./tools/testh5dump.sh
Completely rewritten to make it shorter, better documented,
and conforming to most of the other test outputs.
The comparison of the actual output with the expected output
is insensitive to differences in white space. The test now
passes for the first time on Linux where the output width
wasn't as expected but the output was otherwise correct.
./tools/testfiles/tall-1.ddl
./tools/testfiles/tall-2.ddl
./tools/testfiles/tall-3.ddl
./tools/testfiles/tattr-1.ddl
./tools/testfiles/tattr-2.ddl
./tools/testfiles/tattr-3.ddl
./tools/testfiles/tattr-4.ddl
./tools/testfiles/tcomp-1.ddl
./tools/testfiles/tcomp-2.ddl
./tools/testfiles/tcomp-3.ddl
./tools/testfiles/tcomp-4.ddl
./tools/testfiles/tdset-1.ddl
./tools/testfiles/tdset-2.ddl
./tools/testfiles/tdset-3.ddl
./tools/testfiles/tdset-4.ddl
./tools/testfiles/tgroup-1.ddl
./tools/testfiles/tgroup-2.ddl
./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tlink-1.ddl
./tools/testfiles/tlink-2.ddl
./tools/testfiles/tlink-3.ddl
./tools/testfiles/tlink-4.ddl
./tools/testfiles/tlink-5.ddl
./tools/testfiles/tslink-1.ddl
./tools/testfiles/tslink-2.ddl
Changed `../h5dump' to just `h5dump'.
./config/alpha-dec-osf4.0
Added more warning and optimization switches to the native
compiler.
H5F_istore_lock and H5F_istore_inlock to prevent race between reading and
writing data chunks that caused "holes" (i.e., sequences of 0s)
in chunked datasets.
----------------------
./INSTALL.parallel [NEW]
We're beginning to unify some of the parallel installation
steps. This file will contain general information for
installing the parallel library. It's not complete yet.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Check for xdr_int() in libnsl required on Solaris when linking
with hdf4. It's found on the Irix system I tested which
complains that `-lnsl' didn't resolve any symbols. Oh well.
Fixed the order of searching for libdf and libmfhdf for hdf4
linking.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5Z.c
Check for compress() in libz in order to find older versions
of the library that will still work for hdf4. Added a
separate check for compress2() that hdf5 will use.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Sselect.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./test/bittests.c
./test/gheap.c
./test/hyperslab.c
./test/istore.c
./test/tmeta.c
./test/trefer.c
./test/tselect.c
./tools/h5debug.c
./tools/h5tols.c
Added checks for Posix.1g types like `int8_t'. If not defined
then H5private.h defines them. Changed all `int8' etc. to
`int8_t'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Z.c
Calling H5*_term_interface() resets interface_initialize_g to
FALSE so a subsequent call to H5open() (implied or explicit)
reinitializes global variables properly.
./src/H5private.h
./src/H5Oefl.c
./src/H5S.c
Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to
SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they
match the Posix.1 constants in <limits.h>.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5detect.c
Added 36 more integer hardware conversion functions to the
type conversion table for conversions to/from `long long' and
`unsigned long long'. The `long long' names will be changed
shortly to make them portable to Win32.
Changed H5T_init() to H5T_native_open() and added an
H5T_native_close() to open and close the predefined native
data types.
Increased the initial size of the type conversion table from
64 to 128 entries.
Reordered the 90 new integer conversion functions so the names
that are printed favor `int' over `short' or `long' when two
of them are the same.
./test/dtypes.c
Added hardware and software integer conversion tests for the
56 functions I added recently but not the additional 36
checked in this time. That will come next.
Call H5close() after each test so type conversion statistics
are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes
Added more debugging output for when things go wrong.
./src/H5private.h
Removed trailing carriage-returns inserted by broken operating
system ;-)
----------------------
./bin/trace
./src/H5.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
Added a `scope' argument to H5Fflush() which should be either
H5F_SCOPE_LOCAL or H5F_SCOPE_GLOBAL and determines which files
are flushed (just the specified file or the entire virtual
file).
./src/H5F.c
Added reference counts to the H5F_t struct so we get the
correct behavior between H5Funmount() and H5Fclose().
./src/H5O.c
Fixed a memory leak that happens during error handling.
./test/cmpd_dset.c
./test/unlink.c
Fixed a memory leak.
./test/mount.c
Enabled the H5Fclose() test.
----------------------
./src/H5.c
Fixed a signed vs. unsigned comparison.
./src/H5D.c
Setting a fill value of all zeros will cause the fill value to
be written to the dataset instead of relying on the low-level
file driver initializing unwritten areas with zero.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5O.c
./src/H5T.c
More file mounting stuff.
./src/H5I.c
Fixed a bug where trying to close an invalid object id caused
a core dump. For instance, H5Gclose(-1).
./MANIFEST
./test/Makefile.in
./test/mount.c [NEW]
Mounting tests.
./src/H5R.c
Fixed a couple (herr_t)NULL casts.
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./test/istore.c
./test/tstab.c
Removed CWG functionality.
./tools/Makefile.in
Added `_test' where I added `test' last week. Maybe now the
snapshots will start up again...
----------------------
./doc/html/H5.format.html
./src/H5HG.c
Fixed a bug in the global heap that caused H5HG_read() to
write past the end of the buffer in certain cases.
./test/big.c
The test is skipped if hdf5 was configured with
`--disable-hsizet'.
./src/H5Ofill.c
Data type conversions are implemented for the fill value.
./src/H5.c
Tracing prints one of H5P_FILE_CREATE, H5P_FILE_ACCESS,
H5P_DATASET_CREATE, H5P_DATASET_XFER, or H5P_MOUNT instead of
the more cryptic H5I_TEMPLATE_* constants.
./src/H5D.c
Removed prototype for H5D_find_name().
./src/H5I.c
The GROUP_MASK and ID_MASK are both calculated from GROUP_BITS
instead of being set by hand.
We don't use the sign bit of hid_t; all valid hid_t values are
positive so we can say things like `if ((file=H5Fopen(...))<0)'.
Changed `(int)pow(2.0,x)' to `1<<x' so we don't have to worry
about rounding.
Fixed H5I_get_type() so it doesn't always fail an assertion.
./src/H5E.c
./src/H5Epublic.h
Added minor error H5E_MOUNT
./src/H5F.c
./src/H5Fprivate.h
Added H5Fmount() and H5Funmount(). Mounting and unmounting
works as documented but some of the other things aren't
implemented yet, the biggest being current working groups
always acting on the root of the mount tree, and H5Fclose()
closing the entire tree. The rest of the stuff will be added
shortly...
./src/H5P.c
./src/H5Ppublic.h
Added the H5P_MOUNT property list but haven't implemented any
particular properties for it yet.
./src/H5Gstab.c
Hard links across files return an error instead of failing an
assertion.
----------------------
./src/H5D.c
./src/H5Fistore.c
./src/H5Fprivate.h
Fixed a couple things for parallel hdf5 that I broke with the
last checkin.
./src/H5Ofill.c
If no fill value is specified it isn't added to the object
header.
./tools/h5ls.c
Added a line-feed after `Unknown object' is printed.
./tools/h5tools.c
Fixed printing of scalar values. Need to still track down a
failed assertion when H5Sselect_hyperslab() is called with a
zero size....
Changes since 19980930
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5O.c
./src/H5Ofill.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/Makefile.in
Added fill values as documented in previous e-mails. They only
work for chunked datasets so far.
./src/H5E.c
./src/H5Epublic.h
./src/H5P.c
Changed H5E_TEMPLATE to H5E_PLIST.
./src/H5Omtime.c
./src/H5V.c
Fixed a typo in a comment.
./src/H5Tconv.c
Fixed a bug in compound type conversions that caused an
assertion to fail.
----------------------
./MANIFEST
Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name.
Added a few missing files. Are all of these supposed to be
distributed?
./tools/testfiles/h5dumptst.c
+ ./tools/testfiles/tall-1.ddl
+ ./tools/testfiles/tall-2.ddl
+ ./tools/testfiles/tall-3.ddl
./tools/testfiles/tall.ddl
./tools/testfiles/tall.h5
+ ./tools/testfiles/tattr-1.ddl
+ ./tools/testfiles/tattr-2.ddl
+ ./tools/testfiles/tattr-3.ddl
+ ./tools/testfiles/tattr-4.ddl
./tools/testfiles/tattr.ddl
./tools/testfiles/tattr.h5
+ ./tools/testfiles/tdset-1.ddl
+ ./tools/testfiles/tdset-2.ddl
+ ./tools/testfiles/tdset-3.ddl
+ ./tools/testfiles/tdset-4.ddl
./tools/testfiles/tdset.ddl
./tools/testfiles/tdset.h5
+ ./tools/testfiles/tgroup-1.ddl
+ ./tools/testfiles/tgroup-2.ddl
+ ./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tgroup.ddl
./tools/testfiles/tgroup.h5
+ ./tools/testfiles/tslink-1.ddl
+ ./tools/testfiles/tslink-2.ddl
./tools/testfiles/tslink.ddl
./tools/testfiles/tslink.h5
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Gstab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/istore.c
Implemented split ratios as documented in previous
e-mails. Frank, the new API functions are H5Pget_btree_ratios()
and H5Pset_btree_ratios().
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
Added more type checking for the data transfer property list
passed to these functions.
./src/H5D.c
Added a dataset transfer property list as an argument to
H5D_allocate() for the parallel version in order to pass split
ratios down to H5F_istore_lock(). Eventually we won't need
the split ratios for H5D_allocate() because we'll build a
completely full B-tree from the leaves up, but it might be
useful to have other transfer properties at that level
anyway. I always caled H5D_allocate() with &H5D_dflt_xfer.
./MANIFEST
./test/Makefile.in
./test/overhead.c [NEW]
Added an `overhead' test run by `make timings'.
----------------------
./MANIFEST
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./test/Makefile.in
./test/unlink.c [NEW]
Finished H5Gunlink() and H5Grename().
./src/H5F.c
./src/H5Fistore.c
./src/H5Fprivate.h
Removed the last memcpy() from the chunk cache.
./src/H5Fistore.c
The offset of a chunk within a dataset is an 8-byte quantity
per dimension instead of 4 bytes.
./src/H5HL.c
Fixed infinite loops in H5HL_remove().
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
./test/chunk.c
./test/dsets.c
The number of slots in the raw data cache can be queried or
set with H5Pget/set_cache(), which now take an extra argument.
The default number of slots is 521 and the default maximum
size is 1MB.
./src/H5Fistore.c
./src/H5Fprivate.h
Finished optimizations. The cache is now a hash and a linked
list instead of an array. The cpu time on my machine for
H5F_istore_lock() has been cut by 60% and H5F_istore_unlock() by
35%.
----------------------
This checkin is to fix a couple bugs for Jim Reus. Some features are
not fully implemented but it shouldn't break anything.
./config/conclude.in
./test/Makefile.in
`make clean' removes object files from the test directory as
well as a couple more *.h5 temp files.
./config/hpux9.03 [NEW]
New config file for HP/UX 9.03
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gstab.c
Not-yet-complete version of object removal.
./src/H5Fistore.c
./src/H5Fprivate.h
Experimental optimizations, disabled by default.
./src/H5Fprivate.h
Default low-level driver was changed to H5F_LOW_SEC instead of
H5F_LOW_STDIO because the sec2 driver is much easier to debug.
./src/H5Fsplit.c
./src/H5G.c
./src/H5Z.c
Changed a couple return statements to HRETURN.
./src/H5Odtype.c
Removed a check for nested compound data types from back when
they weren't implemented that raised an error.
./tools/h5tools.c
Increased temp buffer sizes and added a check for buffer
overflow so we fail an assertion (hopefully). This really
needs to be fixed sometime.
Added support for printing H5T_STRING data types.
so only proc 0 writes it to disk. The elimination is activated
only when the environment variable HDF5_MPI_1_METAWRITE is nonzero;
otherwise all processes that opened the file will write the metadata to disk.
----------------------
./bin/release
Added ./Makefile to the distribution again -- it got lost in
the changes last week although it isn't all that important a
file since it gets clobbered by configure anyway.
./bin/trace
./doc/html/Filters.html
./doc/html/H5.format.html
./doc/html/H5.user.html
./src/H5.c
./src/H5D.c
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5O.c
./src/H5Ocomp.c
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c
./src/H5Zprivate.h
./src/H5Zpublic.h
./src/hdf5.h
./test/dsets.c
./tools/h5ls.c
Added the data filter pipeline, a generalization of the
compression stuff which allows things like checksums,
encryption, compression, performance monitoring, etc. See
./doc/html/Filters.html for details -- it replaces the
Compression.html doc.
./src/H5T.c
Cleaned up debugging output.
./config/linux
Added checks for egcs and pgcc and changed optimization flags
for the compilers.
./src/H5G.c
./tools/h5dump.c
Fixed compiler warnings in these files and others.
./configure.in
./src/H5private.h
./test/mtime.c
Added a check for difftime() and defined HDdifftime() to do
something else on systems that don't have difftime().
----------------------
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsplit.c
Changed the allocation size request from `size_t' to `hsize_t'
because it was overflowing for the `big' test.
./src/H5detect.c
If `long double' and `double' are the same size then we define
H5T_NATIVE_LDOUBLE to be the same as H5T_NATIVE_DOUBLE.
Similarly for `long' vs. `long long' and `unsigned long' vs.
`unsigned long long'.
./test/Makefile.in
Added `big' to the list of tests to normally run.
./test/big.c
Added a check to see if the file system supports holes and if
it doesn't then the test is skipped.
H5D.c:
Created a new function H5D_allocation to do allocation of all datasets.
According to the storage layout, it calls the appropriate function.
H5Fprivate.h:
H5Fistore.c:
H5F_istore_allocation now takes a dimension array, (old version
used a space pointer) to determine how many chunks to allocate.
Changed H5F_istore_get_addr to a private (static) function. No
one outside of H5Fistore.c is calling it.
Removed three forward declarations now that they are not needed.
Tested platform:
O2K
----------------------
./src/H5Fistore.c
./src/H5S.c
Fixed places where `herr_t' functions returned NULL for
failure: H5F_istore_get_addr() and printf(?!?) (probably
because a printf() was in the first column :-/ so I don't know
what function it really was that I fixed), and H5S_extent_copy().
./src/H5Fprivate.h
Added declarations for H5F_istore_get_addr() and
H5F_istore_allocate().
./src/H5S.c
./src/H5Sprivate.h
Split H5Sset_extent_simple() into H5S_set_extent_simple() and
replaced calls to the API function with calls to the internal
function.
Changed calls to H5Screate() to H5S_create() and H5Sclose() to
H5S_close().
./src/H5Shyper.c
./src/H5Spoint.c
Removed unused labels and variable.
./src/H5T.c
./src/H5Tconv.c
Changed calls to H5Tfind() to H5T_find().
./src/H5TB.c
Split function return type onto a separate line for five
functions and added API tracing calls.
./src/H5F.c
./src/HFcore.c
./src/H5Ffamily.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5MF.c
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_alignment() so that it is now possible to align
file allocation requests on application-specified
boundaries. Any request >= the specified threshold will begin
on an address which is a multiple of the specified
alignment. Defaults are one for threshold and alignment. The
alignment is done on relative addresses, so the size of the
user block can affect the location of the data in the file.
./src/H5D.c
./src/dsets.c
Added a test for, and fixed the data space caching bug in
datasets. Extending a dataset through one handle will cause
all other handles to the same dataset to get the new dataset
size.
./src/H5S.c
./src/H5Sprivate.h
Removed an unused argument from H5S_read() which duplicated
information from the other argument.
./config/linux
Made `--enable-parallel' the default on my system. It used to
be that way before but then I accidently turned it off and
forgot about it.
./src/H5Fmpio.c
Qualified some function arguments with __unused__. Changed a
couple places where NULL was returned on error for herr_t
functions.
./src/H5P.c
Removed unused autos from H5Pset_mpi().
mode to use for data transfer. Currently, INDEPENDENT transfer
is the default mode. Collective is supported for files opened
via the MPIO driver. Specific changes to individual files follow.
H5D.c:
Replaced previous kludge of passing xfer_mode via the file access_mode
with xfer_mode function parameter all the way to the low level I/O
drivers.
H5Dprivate.h:
The H5D_xfer_t.xfer_mode is now used in serial and parallel modes.
Removed the "HAVE_PARALLEL" macro condition to support it.
H5Dpublic.h:
Added H5D_XFER_DFLT as a new value for H5D_transfer_t and removed
the HAVE_PARALLEL condition macro to make the H5D_transfer_t
definition available to both serial and parallel version.
H5B.c:
H5F.c:
H5Farray.c:
H5Fcore.c:
H5Ffamily.c:
H5Fistore.c:
H5Flow.c:
H5Fmpio.c:
H5Fsec2.c:
H5Fsplit.c:
H5Fstdio.c:
H5Gnode.c:
H5HG.c:
H5HL.c:
H5O.c:
H5Sprivate.h:
H5Ssimp.c:
debug.c:
Added xfer_mode to the argument lists of the following routines to
specify data transfer mode. Then updated calls to these routines
with appropriate transfer mode. Whenever cases that collective
mode is inappropriate (e.g. object header read-write, flush),
H5D_XFER_DFLT is used. The H5D_XFER_DFLT mode is currently
acting the same as the independent mode.
H5F_block_read
H5F_block_write
H5F_arr_read
H5F_arr_write
H5F_core_read
H5F_core_write
H5F_fam_read
H5F_fam_write
H5F_mpio_read
H5F_mpio_write
H5F_low_write
H5F_low_read
H5F_sec2_read
H5F_sec2_write
H5F_split_read
H5F_split_write
H5F_stdio_read
H5F_stdio_write
H5S_simp_fgath
H5S_simp_fscat
H5S_simp_read
H5S_simp_write
H5Fprivate.h:
H5P.c:
Removed access_mode field from struct H5F_access_t type.
The access-mode was the initial design to control independent
or collective I/O mode. It is now supported by the data
transfer mode.
----------------------
./html/Datasets.html
Fixed a couple of typos.
./src/H5.c
Added the `Z' modifier to HDfprintf() for `size_t' sizes. Use
it like this:
HDfprintf(stderr,"size is %Zd\n", (size_t)x);
./src/H5AC.c
./src/H5F.c
./src/H5Fprivate.h
The maximum number of meta data objects that can be cached can
be set from the application (but the library might not honor
it every time; it's a hint).
./src/H5D.c
Changed a warning message so it's not so alarming.
./src/H5Fistore.c
Chunks can be cached.
./src/H5O.c
./src/H5Oprivate.h
Added H5O_copy() and H5O_free() to copy and free messages.
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_cache() and H5Pget_cache() and changed lots of
"template" to "property list".
./src/H5Z.c
./src/H5Zpublic.h
Miscellaneous little things to clean up. Mostly just removed
H5Z_MAXVAL and added H5Z_USERDEF_MIN and H5Z_USERDEF_MAX.
./MANIFEST
./test/Makefile.in
./test/chunk.c [NEW]
Added a performance test for chunk caching. It looks at the
amount of I/O instead of timing because timing is partly
dependent on the chunk size and I wanted a measurement that
was a function of only the cache size. Run `chunk' with no
arguments and then say `gnuplot x-gnuplot' to see the plots
(press return between plots). Postscript files are created for
each plot.
./test/big.c
./test/cmpd_dset.c
./test/extend.c
./test/external.c
./test/gheap.c
Added H5F_ACC_DEBUG so we can see cache performance
statistics.
----------------------
./src/H5Bprivate.h
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5Gpkg.h
./src/H5MF.c
./src/H5P.c
./src/H5Ppublic.h
./test/big.c
./html/Big.html
./html/Files.html
Family members can now be any size >1kB. Got rid of some
places where we were reading a property list after it was
closed.
./MANIFEST
./src/Makefile.in
./src/h5repart.c
A program to repartition file families. The source and/or
destination may be files or file families. Examples:
testhdf5 -c -o stab
h5repart -m 1m tstab2.h5 x%05d.h5
h5repart -m 100k x%05d.h5 y%05d.h5
h5repart y%05d.h5 z.h5
diff tstab2.h5 z.h5
./src/h5ls.c
Added a usage message, replaced assertions with error
messages.
./config/linux
Made a warning message more obvious. Added better
optimization flags for Pentium-Pro's.
----------------------
./html/Compression.html [NEW]
./html/Datasets.html
./html/H5.format.html
./html/H5.user.html
Documented compression. A couple of the H5P functions aren't
quite implemented yet but they're coming soon...
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocomp.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c [NEW]
./src/H5Zprivate.h [NEW]
./src/H5Zpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/dsets.c
./test/istore.c
Compression is now mostly working. Don't try to open a
compressed dataset though because the compression message
won't be read.
./html/Datatypes.html
./html/H5.api.html
./src/H5.c
./src/H5private.h
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added timing support. When compiled with H5T_DEBUG defined
the library will print conversion bandwidths when the library
closes. The H5Tregister functions take a string as the first
argument so the statistics output is meaningful.
./MANIFEST
Added new files.
./configure.in
./src/H5config.h.in
Check for getrusage(). Check for compress2() in libz.a and
the zlib.h header file. Added `z' to the debug list.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
./src/debug.c
Cleaned up some indentation and added support to print istore
B-trees. From the debugger, give the B-tree address and the
dimensionality from the layout message of the object header.
./src/h5ls.c
The oid is printed as w❌y:z where w and x are the file ID
and y and z are the OID within the file. You can give z or
y*2^32+z as an argument to the debugger to print the object
header for the object.
./src/H5AC.c
Cleaned up statistics and made them match those reported by
H5T and H5Z.
./src/H5MM.c
./src/H5MMprivate.h
./src/H5Fistore.c
Finally got rid of a couple of long-standing const cast
warnings.
----------------------
./src/H5Osdspace.c
./html/H5.format.html
In the past we were allowed to have >2GB files on a 32-bit
machine as long as no dataset within the file was larger than
4GB (or whatever sizeof(size_t) is). That's been fixed now.
All dataset size calculations are done with `hsize_t' which is
normally defined as `unsigned long long'.
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
The file family member size can now be set/queried. The
default is still 64MB, but it can be set to 1GB by saying:
H5Pset_family (plist, 30, H5P_DEFAULT);
When opening an existing file family the specified
bits-per-member is ignored and the first member of the family
determines the bits-per-member, which can be retrieved with
H5Pget_family().
./acconfig.h
./configure.in
./src/H5config.h
./src/H5public.h
Added `--disable-hsizet' so that those with old GCC compilers
(<2.8.1) can still compile the code.
./src/H5.c
./src/H5private.h
Added HDfprintf() which works just like fprintf() except you
can give `H' as a size modifier for the integer conversions
and supply an `hsize_t' or `hssize_t' argument without casting
it. For instance:
hsize_t npoints = H5Sget_npoints(space);
HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n",
npoints, npoints);
You can now give `%a' as a format to print an address, but all
formating flags are ignored and it causes the return value of
HDfprintf() to not include the characters in the address (but
who uses the return value anyway :-). Example:
H5G_t *grp;
HDfprintf(stdout, "Group object header at %a\n",
&(grp->ent.header));
Added HDstrtoll() which works exactly like [HD]strtol() except
the result is an int64.
./src/debug.c
Large addresses can now be entered from the command-line. Use
either decimal, octal (leading `0') or hexadecimal (leading
`0x') when giving the address.
./src/h5ls.c
The printf format for dataset dimensions was changed to `%Hu'
to support large datasets.
./test/big.c [NEW]
A test for big datasets on 32-bit machines. This test is not
run by default. Don't try to run it on an nfs-mounted file
system or other file system that doesn't support holes because
it creates two 32GB datasets of all zero.
----------------------
./src/H5B.c
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5S.c
./src/H5Sprivate.h
./src/H5Spublic.h
./src/H5Ssimp.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5private.h
./src/H5public.h
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tfile.c
./test/th5s.c
Anything having to do with the size of a dataset now uses the
types `hsize_t' and `hssize_t' which must be the same size and
at least as large as `size_t'. This isn't fully tested yet,
so hsize_t and hssize_t are defined as size_t and ssize_t in
H5public.h. Setting them to larger values will trip up gcc
versions less than 2.8.1 on x86 platforms.
Documented unused function formals with `__unused__' before
the formal name. This also has the effect of supressing
warning messages for gcc since it's defined to be
`__attribute__((unused))' in the H5private.h file.
./src/debug.c
./src/h5ls.c
If the file name contains a `%' then the file is opened as a
file family with H5P_DEFAULT for the file member access
property list.
./src/h5ls.c
The group name is optional, defaulting to `/'.
./src/hdf5.h
Added some missing public header files.
----------------------
./configure.in
Moved setting of compiler warning switches earlier in the file.
Turned on more warning switches to gcc.
./config/linux
Prints a warning if the gcc version is less than 2.8.1 since
that version has problems with register allocation for `long
long'.
./html/Datatypes.html
Documented sharing of data types between datasets.
./src/H5G.c
./src/H5Gpublic.h
Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard
links. Still have soft links to do.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5D.c
./src/H5E.c
./src/H5Eprivate.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5HLprivate.h
./src/H5I.c
./src/H5Iprivate.h
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5Ssimp.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5detect.c
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tstab.c
Fixed comparisons between signed and unsigned values. Fixed
warnings about unused function arguments.
----------------------
./MANIFEST
./src/H5HG.c [new]
./src/H5HGprivate.h [new]
./src/H5HGpublic.h [new]
./src/Makefile.in
Added global heaps, H5HG. This compiles but is untested.
./src/H5D.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5HL.c [renamed from H5H.c]
./src/H5HLprivate.h [renamed from H5Hprivate.h]
./src/H5HLpublic.h [renamed from H5Hpublic.h]
./src/H5Oefl.c
./src/Makefile.in
./src/hdf5.h
./test/theap.c
Renamed local heaps from H5H to H5HL.
./src/H5AC.c
./src/H5ACprivate.h
./src/debug.c
Added debugging support for global heap collections.
./html/H5.format.html
Ripped out the old small object heap documentation and added
documentation for the new global heap.
./html/H5.api.html
./src/H5P.c
./src/H5Ppublic.h
./src/H5F.c
./src/H5Fprivate.h
./src/H5private.h
The H5Pget_version() function no longer returns a small object
heap version number. Instead, each collection of the global
heap has its own version number instead of a single number in
the file boot block.
./bin/release
Omit files marked for removal by CVS even though the removal
hasn't been committed yet.
./test/iopipe.c
Removed warnings about casting unsigned int to double on Irix64.
./MANIFEST
Removed ./test/testpar/phdf5sup.c
----------------------
./src/H5D.c
Zero element requests for H5Dread() and H5Dwrite() succeed.
./src/H5F.c
./src/H5Fprivate.h
All files will have a root group. This greatly simplifies the
library at the expense of ~1k extra bytes in files that have
only one object.
./src/H5D.c
./src/H5Dprivate.h
./html/Groups.html
Functions that used to take a file ID and an object name can
now take a group ID instead of a file ID. This doesn't change
the API, only it's documentation.
./src/H5G.c
./src/H5Gprivate.h
./src/H5O.c
./src/H5Oprivate.h
Removed extra file arguments from some internal functions
since the file pointer can be found from the group pointer or
a symbol table entry (ent->file or H5G_fileof(group)).
Besides, when we eventually implement mounting one file on
another, H5G_namei() might return a different file than what
you gave it, and that file is part of the returned symbol
table entry.
./src/H5G.c
Fixed bug with `.' appearing in a name. It used to hang the
library.
./src/Makefile.in
./src/h5ls.c [NEW]
./MANIFEST
Added `h5ls' a simple program that takes a file name and a
directory and lists the contents of that directory using
H5Giterate().
./test/istore.c
Changed an argument to H5G_create().
./test/tstab.c
Removed test_1 which was testing that files with a single
object don't have a root group. This no longer applies.
----------------------
./src/H5D.c
./test/external.c
A contiguous dataset can now be stored in external files in
such a way that the slowest varying dimension can be increased
after the dataset is created and even written. The user must
have reserved enough space in the external file and the data
space must allow an increase the the slowest varying dimension.
See test_3() of ./test/external.c
./src/H5Oefl.c
./configure.in
./src/H5Fprivate.h
Fixed an overflow bug with unlimited external storage.
./src/H5V.c
Fixed a cast warning.
./test/dsets.c
Make better use of automatic error reporting.
----------------------
./MANIFEST
New files
./html/extern1.gif [NEW]
./html/extern1.obj [NEW]
./html/extern2.gif [NEW]
./html/extern2.obj [NEW]
./html/Datasets.html
Documented external raw data storage.
./html/Datasets.html
./html/chunk1.gif [NEW]
./html/chunk1.obj [NEW]
Added a picture and better description for chunking since it
seems that people are thinking chunks are fixed-size at the
file level instead of at the array level.
./src/H5D.c
./src/H5Dpublic.h
./test/external.c
Changed H5Dget_create_parms() to H5Dget_create_plist().
./src/H5D.c
./src/H5Farray.c
./src/H5Fprivate.h
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./test/external.c
./test/istore.c
External raw data file I/O for contiguous storage is now
working. The library supports segments of various sizes which
can be scattered throughout multiple files in any order.
./test/Makefile.in
Remove more temporary files.
----------------------
./html/Dataspaces.html
./html/Errors.html
./html/Files.html
./html/H5.api.html
./html/review1.html
./src/H5private.h
./src/H5public.h
./test/dsets.c
./test/dtypes.c
Removed all the types like `int32' and `intn' into private
headers since they violate the naming scheme and pollute
application name space. Besides, our test files only use them
in a handful of places and it's probably useless to export
them to the app. The app is always written in terms of
standard numeric types or its own numeric types and probably
never in terms of HDF5 numeric types. If it were, then the
user would have to copy from their type to hdf5 type for
almost every hdf5 API function call! Same goes for return
values. I also removed SUCCEED/FAIL from the API since apps
should be checking against zero anyway.
if (FAIL==(space=H5Screate_simple(...))) /*wrong*/
if ((space=H5Fcreate_simple(...)<0)) /*right*/
./src/H5.c
Changed arguments of H5version() from `uintn' to `unsigned'.
./src/H5Tpublic.h
./src/H5T.c
Changed return type of H5Tget_nmembers() from `intn' to `int'
./src/H5A.c
./src/H5Aprivate.h
./src/H5Apublic.h
Changed `H5Asearch_func_t' to `H5A_search_func_t' and moved
its definition from the public to the private header file.
./html/H5.format.html
Documented changes made to the external file list (H5O_EFL)
message.
./src/H5D.c
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
Added partial support for external raw data files. HDF5 can
now describe external raw data files by listing the file
names, offsets, and size for a dataset. However, we will
restrict a dataset to be stored "contiguously" when the
external file list is viewed as a single address space. The
current implementation is unable to read/write to external
files--that will come later this week as will documentation.
For now, take a look at ./test/external.c, particularly the
calls to H5Pset_external().
./test/Makefile.in
./test/external.c [NEW]
./MANIFEST
Added tests for external storage. Note: the read test is
supposed to fail at this point since reading external datasets
is not implemented yet. There is no write test.
./src/H5S.c
./src/H5Sprivate.h
./src/H5Ssimp.c
Added H5S_get_npoints_max() to return the maximum possible
number of data points in a data space.
Added an extra argument to H5S_get_dims() which returns the
maximum dims.
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5M.c [DEPRICATED]
./src/H5Mpublic.h [DEPRICATED]
Changed `template' to `property list' in lots of places.
./src/H5Osdspace.c
Removed an extra `\n' from a print statement.
./src/H5S_public.h
Changed H5S_UNLIMITED to the maximum size_t value.
./test/extend.c
"Extendable" is spelled "extendible".
./src/H5Farray.c
./src/H5V.c
./src/H5Vprivate.h
./test/hyperslab.c
Strides are now type ssize_t instead of int. These have
nothing to do with the sample granularity arguments for
hyperslabs, which are also called "strides" in the code.
./test/tstab.c
Changed assumptions about default address and length sizes.
----------------------
./bin/release
Changed default to not tag CVS sources.
./src/H5F.c
Replaced a constant switch with preprocessor directives.
Removed a local variable which was set but not used.
./src/H5Fprivate.h
Changed `long long' to `int64' to get rid of ansi warnings in
a few places.
Fixed bugs in INT64DECODE() and UINT64DECODE() for big-endian
architectures. This fixes all the bugs with the Irix -64
compile.
./src/H5F.c
The default address and length sizes are set according to the
sizeof(size_t) now that the bugs have been fixed.
./src/H5Fpublic.h
Removed a trailing comma in an enumerated type.
./src/H5Fstdio.c
./src/H5Fsec2.c
Added two more calls to fseek64() and lseek64(). Removed `long
long' in place of `int64' to suppress -ansi warnings.
./src/H5P.c
Replaced a FAIL with H5F_LOW_ERROR.
./src/H5private.h
./configure.in
Increased version number to hdf5-1.0.1a since we've already
released hdf5-1.0.0a. Include <sys/types.h>. Fixed
indentation. Fixed detection of off64_t for old Irix systems
where it might be a struct.
./src/Makefile.in
Moved a comment from the shell to the makefile since some
versions of sh barf on interactive comments.
./config/linux
Allow overriding of the CC variable from the command-line. It
still defaults to gcc but this allows us to specify a complete
path from test scripts by saying:
CC=/usr/local/tools/gnu/gcc sh configure
----------------------
./html/Files.html
./src/H5C.c
./src/H5Cpublic.h
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5Fsplit.c
./test/tstab.c
Added file-access property functions.
The split driver takes file extensions as properties.
./src/H5A.c
./src/H5Aprivate.h
Added some comments. Changed H5A_destroy() to call the free
function on all the atoms that are destroyed. This fixes a bug
where the file boot block isn't updated if the file isn't
closed before calling exit().
Removed extra `*' and `&' from some places.
./src/H5AC.c
Replaced an occurrence of NO_ADDR with NULL.
./src/H5Odtype.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
Data types of compound members are pointers.
./H5private.h
Some changes to make lseek64() work on Irix 5.3 where header
files don't realize that `long long' works.
./acconfig.h
./configure.in
Removed definition for PHDF5 since it looks like everyone is
useing HAVE_PARALLEL now.
./configure.in
./src/H5detec.c
Added checks for gethostname() and getpwuid().
----------------------
./configure.in
./src/H5Fprivate.h
./src/H5Fsec2.c
We now detect and use lseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Irix `-64'
compiler.
> $ ls -l istore.h5
> -rw-r--r-- 1 matzke meshtv 8605436856 Feb 17 14:03 istore.h5
./configure.in
./src/H5Fprivate.h
./src/H5Fstdio.h
We now detect and use fseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Iris `-64'
compiler.
./src/H5E.c
./src/H5Epublic.h
Added the H5E_OVERFLOW error to signal file address overflow.
./src/H5Fpublic.h
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
./html/Datasets.html
./html/Files.html
./html/H5.api.html
./html/H5.intro.html
./html/H5.sample_code.html
./html/ph5example.c
./html/review1.html
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/phdf5.c
Renamed file access constants to follow the naming scheme.
Also changed the base names a little to be more accurate as to
what they do. The old names H5ACC_WRITE and H5ACC_OVERWRITE
will temporarily work.
H5ACC_DEFAULT --> H5F_ACC_RDONLY for H5Fopen()
H5ACC_DEFAULT --> H5F_ACC_EXCL for H5Fcreate()
H5ACC_WRITE --> H5F_ACC_RDWR
H5ACC_OVERWRITE --> H5F_ACC_TRUNC
Albert or Kim: The H5ACC_INDEPENDENT and H5ACC_COLLECTIVE
macros in H5Fpublic.h should be an enum typedef and have names
more like H5F_MPIO_INDEPENDENT and H5F_MPIO_COLLECTIVE. Also
change the access_mode argument of H5Cset_mpio().
H5Fcreate() and H5Fopen() are more strict now about which
flags are acceptable for the operation.
./src/H5Fprivate.h
./src/H5F.c
./src/H5C.c
Changed the file access template to make it more general. A
union contains a struct for each type of low-level driver and
the default template is initialized at run-time.
./src/H5Fpublic.h
./src/H5F.c
Added H5Fget_access_template() and cleaned up
H5Fget_create_template().
./src/H5C.c
The H5Cset_mpi() no longer trashes the file access template
when an error is detected. We check for errors and *then*
update the file access template.
Added H5C_close() so Albert and Kim have a place to release
the MPI communicator and info from the file access property
list.
Kim or Albert: I notice in H5Cset_mpi() you copy the MPI
communicator. Do you need to do something similar in
H5C_copy()?
./src/H5F.c
Added more error checking for the file creation and access
property lists because it used to be possible to make the
library dump core by swapping the creation and access property
list ID numbers of H5Fcreate().
./test/istore.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/testphdf5.c
One must pass H5C_DEFAULT as the file creation or access
property list in order to get the default property list. It
is no longer possible to pass zero or any other arbitrary bad
object ID.
./src/H5Fcore.c
./src/H5Ffamly.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5MF.c
The file access property list is passed to all H5F_low_...()
functions and to the drivers.
./src/H5Fcore.c
The block size can be set at run time on a per-file basis
instead of at compile time across all files. The "5000 items in
a group test" now takes 1.6 seconds.
./src/H5private.h
Removed inclusion of mpi.h and mpio.h since they're included
from H5public.h.
./src/H5Cpublic.h
./src/H5C.c
Added H5Cset_stdio(), H5Cset_sec2(), H5Cset_core(),
H5Cset_split(), and H5Cset_family() in addition to the
H5Cset_mpio() that Kim and Albert already wrote. We still
need the H5Cget_driver() and an H5Cget...() counterpart for
each of those functions. The split and family drivers still
need a little work but I'm checking this in anyway.
Added modification entry to H5F_open header. Should have been done
when i added the access template argument.
H5Fprivate.h:
The hardcode setting to "define MPIO as the default IO
when HAVE_PARALLEL is set" cause all test programs to fail since
none of them is coded with the needed MPI_Initialize. Change it
back to the previous setting of using sequential I/O allows user
to use sequential I/O by default and use MPIO only if he/she explicitely
asks for it via access template setting.
