** bin/rpmsync
** config/depend1.in
Tweaks for versions of `make' that can't search directories.
** examples/Dependencies
** src/Dependencies
** test/Dependencies
** testpar/Dependencies
** tools/Dependencies
Regenerated all these with more complete path names.
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
This extensive change is the virtual file layer implementation. I've
ported and tested the sec2, family, and core drivers and only ported
the mpio driver (Albert will test it). So if you need MPIO I would
recommend sticking with the previous version for a while.
You will get a few compile warnings about split and stdio drivers not
being implemented and possibly tracing information not inserted in
some of the drivers. You can safely ignore them but I plan to fix
them.
I'm still working on the split driver because I just realized that it
needs a part of the VFL that isn't written yet.
Documentation is being updated also because there were some minor
changes (mostly just name changes). It should be available on my web
site later this week.
./MANIFEST
./src/Makefile.in
./src/hdf5.h
./src/H5Flow.c [REMOVED]
./src/H5Fstdio.c [REMOVED]
./src/H5Fsec2.c [REMOVED]
./src/H5Fsplit.c [REMOVED]
./src/H5Fmpio.c [REMOVED]
./src/H5Ffamily.c [REMOVED]
./src/H5Fcore.c [REMOVED]
./src/H5MFpublic.h [REMOVED]
./src/H5FD.c [NEW]
./src/H5FDcore.c [NEW]
./src/H5FDcore.h [NEW]
./src/H5FDfamily.c [NEW]
./src/H5FDfamily.h [NEW]
./src/H5FDmpio.c [NEW]
./src/H5FDmpio.h [NEW]
./src/H5FDprivate.h [NEW]
./src/H5FDpublic.h [NEW]
./src/H5FDsec2.c [NEW]
./src/H5FDsec2.h [NEW]
Removed/added files for virtual file layer.
./bin/trace
./src/H5.c
Removed unused public datatypes and added new VFL public
datatypes.
Changed an error message.
./config/BlankForm
./config/dec-flags
./config/gnu-flags
./config/hpux10.20
./config/hpux9.03
./config/irix5.x
./config/irix6.x
./config/solaris2.x
./config/unicosmk
Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the
configuration since they're no longer applicable. The default
file driver is always the sec2 driver and it always optimizes
calls to lseek() or lseek64().
./config/depend.in
C preprocessor errors generated during automatic dependency
building are sent to /dev/null to prevent them from appearing
twice in the make output.
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Oshared.c
./src/H5T.c
./src/H5detect.c
./test/ohdr.c
Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent
with the `haddr_t' datatype which is now a public type.
./src/H5D.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Tconv.c
./test/cmpd_dset.c
./test/dsets.c
./test/overhead.c
./test/tselect.c
./test/tvltypes.c
The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER
because the properties apply to all types of I/O operations,
not just datasets.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/big.c
./test/h5test.c
./test/istore.c
./testpar/t_dset.c
./testpar/t_file.c
./tools/h5debug.c
./tools/h5ls.c
Modified to work with the virtual file layer by calling H5FD_*
functions instead of H5F_low_* functions and by passing file
access and data transfer properties by object ID instead of
pointer.
Changed H5D_transfer_t to H5FD_mpio_xfer_t since the
COLLECTIVE vs. INDEPENDENT transfer mode is specific to the
MPIO file driver.
Moved MPIO-specific stuff into the MPIO driver.
./src/H5B.c
./src/H5D.c
./src/H5Fprivate.h
The H5F_mpio_* private functions were renamed and placed in
the H5FDmpio driver except those which appeared in H5Smpio.c.
./src/H5E.c
./src/H5Epublic.h
Added major error number H5E_VFL for virtual file layer
related errors.
./src/H5F.c
./src/H5Fprivate.h
Changed the logic that controls whether the boot block is
written. Instead of assuming that the first call to write the
boot block is only to allocate space, I've added a function
argument which makes this explicit.
Changed the way files are compared so that a driver-defined
comparison function can be called. Files which belong to
different drivers are always considered different.
Removed H5F_driver_t since file drivers are now identified by
object ID instead of a special non-user-extendible datatype.
Removed all the hard-coded low-level file properties which
have been replaced by the various file drivers.
./src/H5I.c
./src/H5Iprivate.h
Added the H5I_inc_ref() which was removed a few months ago
since we finally have a use for it.
./src/H5Ipublic.h
Added the H5I_VFL object ID type to identify file drivers in
the virtual file layer.
./src/H5MF.c
./src/H5MFprivate.h
Moved all the allocation/deallocation code into the virtual
file layer which allows file drivers to override much of it.
./src/H5P.c
./src/H5Ppublic.h
Moved file driver-specific code into the various file driver
files.
The H5Pcopy() and H5Pclose() functions make calls into the
virtual file driver to manage the memory for driver-specific
file access and data transfer properties.
./src/H5private.h
./src/H5public.h
The `haddr_t' type is now public.
./test/tfile.c
Added a few more comments.
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
Removed the unnecessary #include of mpi.h and mpio.h. (They are
included already in H5public.h when applicable.) Changed couple
debug printing to be controlled like the others.
src/H5public.h:
Officially, mpio.h should be in mpi.h but MPIO are not always
supported by the vendor yet. Make the #include of mpio.h conditional
when it is not in mpi.h.
testpar/testphdf5.h:
Removed the unnecessary #include of mpi.h and mpio.h. (They are
included already in H5public.h when applicable.)
Changed it to skip the test instead of aborting when there is not
enough processes to do the test. Also corrected an error in the
error reporting printf statement.
t_dset.c:
testphdf5.c:
testphdf5.h:
Added option for specifying chunk dimensions.
new feature
Makefile.in:
Added the dependence of *.c on the testphdf5.h
t_dset.c:
testphdf5.c:
testphdf5.h:
testphdf5 now takes optional arguements for dataset dimension sizes.
That allows testing with different dimension sizes without recompiling
the whole thing.
Platform tested:
O2K
----------------------
./config/commence.in
./examples/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Fixed some dependency problems in Makefiles. If the library
version is updated then everything gets recompiled.
./src/H5G.c
./src/H5R.c
Failure return value for object type functions is now
H5G_UNKNOWN as documented.
./src/H5Shyper.c
./src/H5Spoint.c
Fixed an unused argument warning.
./tools/h5debug.c
Fixed a call to H5F_block_read() since the 4th argument is
different now.
./tools/h5ls.c
Added a space between the object name and class to make the
output readable when the object name is longer than 24
characters.
C
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
Temporarily commented out the code that tries to link a simple
MPI-IO application because I'm not sure how to pass $LDFLAGS
and $LIBS to the compiler.
Removed the `--enable-parallel=ibm' switch because the library
we link with is either -lmpcc or -lmpcc_r but not both. The
only way to tell is to see what compiler was specified (mpcc
or mpcc_r) but if that compiler is specified then we don't
need any libraries (the compiler script supplies them). That
leaves just two choices: the user must use a compiler script:
CC=mpcc ./configure
or the user must state which library is desired:
LDFLAGS='-lmpcc' ./configure --enable-parallel
Checks for <setjmp.h>, longjmp(), and signal(). We don't check
for setjmp() because it could be a macro (in fact, Posix
requires it to be a macro) and if longjmp() is present then
setjmp() is probably present too ;-)
./src/H5detect.c
The alignment detection loop uses SIGBUS and setjmp/longjmp
instead of fork/wait in order to get around bugs with forking
in conjunction with mpich. This hasn't been tested on the
SP-2 yet but it does work on the DEC Alpha.
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Changed the order that libraries are linked so -lhdf5 is
always before $LDFLAGS.
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
Added a new test to verify the MPIO can support independent
overlapping writes.
testphdf5.c:
Bracketed the MPIO write test with a #ifdef so that it is
tested only when the explicitely turned on.
Platform tested:
O2K.
----------------------
./src/H5.c
./src/H5Smpio.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpublic.h
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
The `long long' type isn't quite as prevalent as we had hoped;
there is at least one system that defines `__int64' but not
`long long'. Therefore, I've temporarily changed all
occurrences of `long long' to `long_long' and then #define
that in H5private.h based on the existence of `long long' or
`__int64'. This gets rid of some #ifdef's in other parts of the code.
The semantics of the hdf5 types are:
*int8_t Exactly one byte
*int16_t At least two bytes. We favor 32-bit integers over
16-bit integers if the 16-bit integer is 4-bytes wide
(Cray)
*int32_t At least four bytes.
*int64_t At least eight bytes
long_long The widest integral integer type
The H5Smpio.c contains debugging code which is non-portable.
./tools/h5ls.c
Changed the order native types are detected so we favor the name `int'
over `short' or `long' if two of them are the same.
./config/conclude.in
Added a rule to make test programs depend on the hdf5 library. This
fixes a minor bug where changing H5detect.c and then running `make
test' caused H5Tinit.c to not be recompiled and therefore the test
files are not relinked.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
New feature
Problem:
Source code must be modified prior to compiling to allow full
filenames to contain preferred user directories. Source must be
recompiled everytime the preferred user directory changes.
Solution:
Instead, allow file prefixes preferred by user to be passed at
runtime using the arguments "-f <prefix>". The "-f" to signal the
next argument is to be a file prefix, and the "<prefix>" to be the
actual prefix used.
Platform tested:
ASCI Red
The purpose of the change is to correct the H5 filenames declared in
testphdf5.c when used on the Intel TFLOP PFS system.
Problem:
The ROMIO library complains of the H5 filenames having no "piofs:",
"pfs:", "ufs:", or "nfs:" prefixes on the filenames. The only type
currently recognized are the "pfs:" prefixes, and the files must
reside in the Intel TFLOP PFS system: /pfs.
Solution: (REQUIRED)
The compile flag -DPOOMA_ARCH=TFLOP is added to the list of CFLAGS in
Makefile.ascired located in the parallel test directory. This compile
flag will allow a special set of filenames to be used when compiling
testphdf5.c on the Intel TFLOP. In addition, instructions to editing
the filenames in testphdf5.c to reside in the user's own /pfs directory
are included in INSTALL.ascired.
Platform tested:
Intel TFLOP
changed to use system supported MPI library. The path to it is
changed slightly too. Updated all the paths variables.
Also updated to reflect the new program source files structure.
Platform tested: Intel Red
big testphdf5.c file. Broke it into modules of related routines.
testphdf5.c -- main routine and global variables initialization plus
some ulitility routines.
t_file.c -- tests of file operations using parallel I/O.
t_dset.c -- tests of datasets operations.
Added routines to fill in test data and to verify data read back.
Would verify data and report errors when detected.
Added verbose flag to control output "volume"--be more verbose
only if it is run with -v option.
----------------------
./configure.in
./src/H5Fprivate.h
./src/H5Fsec2.c
We now detect and use lseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Irix `-64'
compiler.
> $ ls -l istore.h5
> -rw-r--r-- 1 matzke meshtv 8605436856 Feb 17 14:03 istore.h5
./configure.in
./src/H5Fprivate.h
./src/H5Fstdio.h
We now detect and use fseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Iris `-64'
compiler.
./src/H5E.c
./src/H5Epublic.h
Added the H5E_OVERFLOW error to signal file address overflow.
./src/H5Fpublic.h
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
./html/Datasets.html
./html/Files.html
./html/H5.api.html
./html/H5.intro.html
./html/H5.sample_code.html
./html/ph5example.c
./html/review1.html
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/phdf5.c
Renamed file access constants to follow the naming scheme.
Also changed the base names a little to be more accurate as to
what they do. The old names H5ACC_WRITE and H5ACC_OVERWRITE
will temporarily work.
H5ACC_DEFAULT --> H5F_ACC_RDONLY for H5Fopen()
H5ACC_DEFAULT --> H5F_ACC_EXCL for H5Fcreate()
H5ACC_WRITE --> H5F_ACC_RDWR
H5ACC_OVERWRITE --> H5F_ACC_TRUNC
Albert or Kim: The H5ACC_INDEPENDENT and H5ACC_COLLECTIVE
macros in H5Fpublic.h should be an enum typedef and have names
more like H5F_MPIO_INDEPENDENT and H5F_MPIO_COLLECTIVE. Also
change the access_mode argument of H5Cset_mpio().
H5Fcreate() and H5Fopen() are more strict now about which
flags are acceptable for the operation.
./src/H5Fprivate.h
./src/H5F.c
./src/H5C.c
Changed the file access template to make it more general. A
union contains a struct for each type of low-level driver and
the default template is initialized at run-time.
./src/H5Fpublic.h
./src/H5F.c
Added H5Fget_access_template() and cleaned up
H5Fget_create_template().
./src/H5C.c
The H5Cset_mpi() no longer trashes the file access template
when an error is detected. We check for errors and *then*
update the file access template.
Added H5C_close() so Albert and Kim have a place to release
the MPI communicator and info from the file access property
list.
Kim or Albert: I notice in H5Cset_mpi() you copy the MPI
communicator. Do you need to do something similar in
H5C_copy()?
./src/H5F.c
Added more error checking for the file creation and access
property lists because it used to be possible to make the
library dump core by swapping the creation and access property
list ID numbers of H5Fcreate().
./test/istore.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/testphdf5.c
One must pass H5C_DEFAULT as the file creation or access
property list in order to get the default property list. It
is no longer possible to pass zero or any other arbitrary bad
object ID.
./src/H5Fcore.c
./src/H5Ffamly.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5MF.c
The file access property list is passed to all H5F_low_...()
functions and to the drivers.
./src/H5Fcore.c
The block size can be set at run time on a per-file basis
instead of at compile time across all files. The "5000 items in
a group test" now takes 1.6 seconds.
./src/H5private.h
Removed inclusion of mpi.h and mpio.h since they're included
from H5public.h.
./src/H5Cpublic.h
./src/H5C.c
Added H5Cset_stdio(), H5Cset_sec2(), H5Cset_core(),
H5Cset_split(), and H5Cset_family() in addition to the
H5Cset_mpio() that Kim and Albert already wrote. We still
need the H5Cget_driver() and an H5Cget...() counterpart for
each of those functions. The split and family drivers still
need a little work but I'm checking this in anyway.
