Ran bin/reconfigure to update the Makefile.in in directories not part of the fortran directory check=in. Updates Makefile.in due to changes made in configure.in for the Fortran 2003 additions.
Tested on all platforms run under daily tests.
General shared library improvements for CYGWIN / AIX
Description:
Shared libraries are disabled on both CYGWIN and AIX due
to inability to build them correctly. Part of the problem
in both of these situations is the lack of the libtool
flag -no-undefined, which tells libtool that all needed
symbols are defined at link time (a requirement on these
systems) and that it's okay to build shared libraries.
Another problem are lack of dependencies between wrapper
libraries and core C HDF5 library.
This patch addresses both of these by fixing configure to
add in -no-undefined flag for libtool during linking and
adds automake dependencies in the Makefile.am files.
After testing, both CYGWIN and AIX now generate shared
libraries, but there are still some test failures in each.
(cache_api, dt_arith, and testerror.sh on CYGWIN, and
fortran tests on AIX).
Even though the shared libraries are not quite perfect,
this is a general improvement to what we had before, so
I'm applying the patch anyways. Note that default behavior
of shared libraries on these systems being disabled has
NOT been changed and requires the use of the
--enable-unsupported to attempt to build them.
We will need to address the test failures in each
architecture prior to formally supporting shared
libraries on each.
Tested:
h5committested & CYGWIN tested (on bangan)
(AIX tested by Albert on bp-login2)
Add "silent make" mode configure option.
Description:
Automake 1.11 has a new option available that allows for a
silent make mode. This functionality needs to be explicitly
enabled in configure.in via the use of the automake macro
AM_SILENT_RULES, which is what this commit is adding.
This introduces a new configure option:
--{en|dis}able-silent-rules
This option is on by default, and simplies compile and link
line outputs when building the library. Disabling this option
will print full "verbose" output (i.e., full compile and
linking lines for each target).
Tested:
This was tested on jam & h5committested
- Revise shared Fortran library disabling scenarios in configure
- Improve configure output summary
Description:
Shared Fortran libraries are not supported on Mac, but were being
disabled by configure in a way that also forced the C libraries
to be static-only. This has been fixed, so now only shared Fortran
is disabled while shared C can remain.
This prompted two additional changes:
1. While working on the check that addresses whether or not
shared Fortran libraries are allowed, removed old and no
longer needed check(s) that disable shared Fortran
libraries with HP, Intel 8, PGI, and Absoft compilers.
(Essentially, Mac is the only situation in which Fortran
shared are disabled by configure.)
2. Having two different states of libraries (i.e. shared C
library with static-only Fortran library) was not apparent
in the configure summary, which labeled all libraries as
either shared and/or static. I've added lines to both the
C++ and Fortran output sections to list shared/static-ness
of these libraries specifically.
Additionally, I've made sure that the new --enable-unsupported
configure option correctly overrides configure if it tries to
disable a shared library.
Tested:
jam, fred, & h5committest
Corrected use/name of source folder aliases.
Duplicated FindMPI.cmake so that non-c++ compiler is found first (recommemded commands did not work).
Tested: local linux with mpich
Clean up misc. compiler warnings.
Tested on:
FreeBSD/32 6.3 (duty) in debug mode
Mac OS X/32 10.6.4 (amazon) w/C++ & FORTRAN, w/threadsafe,
in production mode
Mac OS X/32 10.6.4 (amazon) w/parallel, in debug mode
Improve configure's large-file support control.
Description:
Modified configure to now attempt to add defines necessary for
supporting largefiles on all systems, instead of solely on linux. This
is in response to user requests to enable largefile support on Solaris
by default, as well as to give extra control on AIX (instead of just
jamming the necessary flag into the config files).
The old --enable-linux-lfs flag has been removed in favor of the
--enable-largefile flag (enabled by default), which can be used on all
platforms.
On systems where large files cannot be supported in this manner,
configure will report as such.
Tested:
h5committest
AIX (NCSA's blue_print machine)
duty, liberty, and linew.
Autotool Upgrade / Libtool Bug Fix
Description:
Updated autotools referenced in bin/reconfigure as follows:
Autoconf 2.64 --> Autoconf 2.65
Automake 1.11 --> Automake 1.11.1
Libtool 2.2.6a --> Libtool 2.2.6b-mcg
The referenced libtool version is a custom version of 2.2.6b. It
has been tweaked to fix a bug in libtool that occurs
when using PGI 10.0 compilers. A check incorrectly categorizes
the C++ compiler as version 1.0 instead of 10.0, and the link
line is subsequently set up incorrectly and fails to compile.
A patch has been made available and will be included in the next
release of libtool, but in the meantime I've applied the patch to a custom
installation as indicated above. This bin/reconfigure now references
the custom installation, and the resulting configure script will correctly
categorize the PGI 10.0 C++ compiler.
Ran bin/reconfigure to regenerate configure and makefiles.
Tested:
jam and amani with PGI 10.0 compilers.
h5committest
The mixed use of RUNTEST (original) and RUNTESTS (new) caused
confusion. E.g., the timings in test/ was still using the old
$RUNTEST. It made more sense to use $RUNTEST which is used
by the dejagnu feature of automake. So, I changed all
$RUNTEST or $RUNTESTS to $RUNEXEC.
config/commence.am & config/conclude.am are the two files
that got changes. Also fixed an error in test/Makefile.am.
The rest are changed by bin/reconfigure.
Tested: h5committested.
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
Updating autotools
Description:
Installed new autotools and used them to reconfigure HDF5.
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
Tested:
Tested on machines jam, smirom, liberty, linew.
Tested w/ features c++, fortran, parallel.
Tested w/ compilers gcc, pgcc, icc.
Further testing via Daily Tests should catch any other outliers. Upon
passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
Fix BZ #1583
Description:
The --enable-static-exec flag was broken. Configure was adding the
-all-static linker flag to an environment variable which was subsequently
never used. (looks like it was used in 1.6 Makefile.ins, but never
moved to 1.8's Makefile.ams when we added automake support).
To fix, I've added this environment varibale to the link lines of all the
tools. Now, when --enable-static-exec is invoked, it will correctly
generate statically linked executables in the installed bin directory.
Tested:
I've tested manually to ensure that the generated execs are static when
the flag is used and dynamic when not. I've also tested when szip is
used, as this was a use case mentioned in the bug report.
Also: ran full tests with make check on jam and smirom for good measure.
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Re-generated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
As part of our Windows cleanup, we try to remove windows-specific tweaks in the source code. There are many instances where Windows code is introduces via ifdef's. We re-evaluate whether they are still required, and found that many of them are not. Others we change to "feature"-specific code, rather than Windows-specific.
Tested:
VS2005 on WinXP
VS.NET on WinXP
h5committest (kagisopp, smirom, linew)
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Description: The test program h52gifgentst was getting installed in the bin
directory during 'make install', and it shouldn't. Make now
builds the program for use in testing but doesn't install it
during 'make install'.
Tested: kagiso
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
Add work-around to allow reading files that were produced with a buggy
earlier version of the library, which could create objects with the wrong
object header message count. There is now a configure flag
"--enable-strict-format-checks" which triggers a failure on reading a file
with this sort of corruption (when enabled) and allows the object to be read
(when disabled). The default value for the "strict-format-checks" flag is
yes when the "debug" flag is enabled and no when the "debug" flag is disabled.
Note that if strict format checks are disabled (allowing objects with
this particular kind of corruption to be read) and the file is opened with
write access, the library will re-write the object header for the corrupt
object with the correct # of object header messages.
This closes bugzilla bug #1010.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Add --enable-deprecated-symbols configure option, to allow users to
remove deprecated public API symbols at configure time.
Add bin/make_vers script to bin/reconfigure actions.
Run bin/reconfigure to regenerate autotool components.
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
Linux/32 2.6 (kagiso)
2) Removing configuration of c++/src/H5cxx_pubconf.h file.
Reasoning: the additional pubconf file caused compilation complications, this is cleaner.
Tested: kagiso, smirom
Description: added new configuration to generate a pubconf file
in the c++/src directory, H5cxx_pubconf.h. When C++
compiler recognizes 'offsetof', the macro
H5_CXX_HAVE_OFFSETOF is defined in the new
pubconf file.
tested: kagiso, smirom
Description: a new configure flag has been created that will now set a macro
in the test/Makefile. The flag is with-default-vfd=. When set to
a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro
DEFAULT_VFD will hold this value.
Tested: kagiso, smirom, linew
file size from MPI_File_get_size. Bypass this problem by replacing it with
stat. Add an option --disable-mpi-size in configure to indicate this function
doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong
file size, print out a warning.
Tested on kagiso (parallel) because already tested the same change to v1.6 on
several platforms (kagiso, cobalt, copper, and sol).
bug fixes
substituted hize_t array index variables for int
stack corruption in the h52gif reading routine, wrote a new routine
shell script for gif tests, added check of program return value
enabled the gif test script
tested: linux pgcc, solaris, linux 64
check if fseeko is available. Using it instead of fseek can support
big files because the offset is of type off_t not long int. Also
added the test for STDIO in big.c.
bug fix
a malloc call with an incorrect length caused several memory problems that ultimately corrupted a name passed in a list of arguments in the h52gif tool
allocated memory was not freed
tested linux
New feature
Add a tests script for h52gif tool. A simple script that just runs the
tool from a pre-saved HDF5 file and produces a gif file. A HDF5 test
generator program is also added
Note: the .am file needs further development, right now it is not
producing the test
Description: Multiple copies of Copyright appeared in Makefile.in. This was
due to automake copying the copyright right in the included files such as
config/commence.am.
Solution: Automake treats double hashes as comments and does not copy them
to Makefile.in. Changed all the copyright notices in config/*.am to use
double hashes for the Copyright right notice.
Tested: kagiso via bin/reconfigure.
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
It seems that while Cygwin supports the time command, it has trouble with
the syntax
srcdir="../../hdf5/test" time ./testhdf5
and complains.
The solution is to test the above case in configure and not to use the time
command if it fails; Cygwin is fine with
srcdir="../../hdf5/test" ./testhdf5
Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility
problem since every platform but Cygwin is already fine with the current
syntax.
