----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
Edited for 1.2.0beta release.
INSTALL.ascired:
Updated with simplified steps.
INSTALL_parallel:
Updated with information that was in INSTALL and INSTALL.parallel.
INSTALL_parallel.ascired:
Removed old setup no longer needed.
RUNPARALEL, RUNSERIAL, disable-shared are specified in config/intel-osf1.
README:
Update mailing list subscription instruction.
RELEASE:
Updated for 1.2.0beta release information.
INSTALL_Windows.txt:
Contains Windows platform installation instructions.
INSTALL.parallel:
Removed because its content has been moved to INSTALL_parallel.
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
----------------------
./configure.in
./configure [REGENERATED]
./src/libhdf5.settings.in [NEW]
./config/conclude.in
./INSTALL
./MANIFEST
A file called `libhdf5.settings' is installed along with the
libraries and it contains a list of various things that might
be of interest to someone using the library (such as what
compiler/options were used and what other libraries might need
to be linked to satisfy external references). We can add more
things as it becomes necessary. Here's a sample...
SUMMARY OF THE HDF5 CONFIGURATION
=================================
HDF5 Version: hdf5-1.1.106
Configured on: Tue Jun 8 11:38:52 EDT 1999
Configured by: matzke@llnl.gov at Spizella Software
Configure mode: development
Host system: i686-pc-linux-gnulibc1
Byte sex: little-endian
Libraries: static, shared
Parallel support: mpicc
Installation point: /usr/local
Compiler: mpicc (egcs-2.91.66)
Compiler switches: -Wall -g
Extra libraries: -lmfhdf -ldf -lz -ljpeg -lm
Archiver: ar
Ranlib: ranlib
Debugged Packages: d,e,f,g,hg,i,mm,o,p,s,v,z
API Tracing: yes
File addresses: large
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./INSTALL
Added instructions for using other compilers on Irix platforms.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
The presence of <sys/sysinfo.h> and <sys/proc.h> is only
checked on DEC/Alpha because there are too many problems
including these headers on other systems.
./config/irix6.x
./config/irix64
Removed `-ansi' and added a comment. Converting an ASCII UTC date
and time to a time_t value is not defined by ANSI or Posix but
is available if we don't use `-ansi'. This allows the dataset
modification time messages to be read properly by
H5Gget_objinfo().
./src/H5Tconv.c
Fixed a compiler warning.
./test/dtypes.c
./test/hyperslab.c
./test/istore.c
Fixed compiler warnings in printf() statements.
----------------------
./INSTALL
Added warnings and a disclaimer about GNU, DEC, Irix64, and NT
compilers that generate incorrect machine code.
./configure.in
./src/H5private.h
Detects and includes <sys/param.h> which is needed on FreeBSD
before <sys/proc.h> even though we only really using anything
from <sys/proc.h> on the DEC Alpha.
./config/irix64
Turned off warnings for duplicate definitions from the linker
because -lnsl on irix has the same stuff in it as -lc.
./config/irix6.x
Split up the CC and CFLAGS settings like with irix64 so that
compilers besides `-n32' can be used.
./bin/snapshot
The snapshots are tagged with names like hdf5-1_1_52 which is
similar to the way the releases are tagged (cvs doesn't allow
dots in tags).
./test/dtypes.c
./src/H5private.h
./src/H5Tconv.c
Fixed some alignment violations on the DEC when using high
optimization levels. The DEC incorrectly optimizes certain
memcpy() and memmove() calls when the source argument is not
word aligned if the call looks like it's copying an atomic
data type.
./test/hyperslab
Worked around code generation bugs in the Irix64 Mongoose 7.00
compiler by casting some `unsigned long' values to `unsigned'
in an expression.
./src/H5Ocomp.c
Fixed a place where %d was used to print a size_t.
----------------------
./INSTALL
./doc/html/Compression.html
./doc/html/Filters.html
Disassociated GNU from zlib. Did not change the introduction
which incorrectly states that compression in hdf5 is available
only if GNU gzip is available (should read zlib).
Changed a typo in INSTALL to match what is documented in
various other places: that zlib 1.1.2 (not 1.0.2) or better is
required for compression.
Added a reference to the main zlib web page in various places.
./src/H5Fistore.c
Fixed a typo in a comment.
./src/H5Flow.c
Removed carriage returns from the end of lines.
./test/dsets.c
The deflate compression tests are still run but `-SKIP-' is
printed instead of `PASSED' if the zlib library was not
detected at configuration time. The tests check that the
compression layer (H5Z) is correctly bypassed.
----------------------
./INSTALL
Added warning that enabling debugging code can adversely
affect performance even when the debugging isn't turned on at
run-time. Performance testing shows that under certain
circumstances (like data type conversions of compound types)
the H5_timer functions, although only a few lines each,
contribute a fairly large percent to the execution time.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Improved the H5Tunregister() function to make unregistering
more flexible. It takes the same arguments as H5Tregister()
but also accepts wild cards. All conversion functions that
match the H5Tunregister() search criteria are removed from the
global type conversion table.
The H5Tregister_hard() and H5Tregister_soft() were combined
into a single function called H5Tregister() which is the
counterpart to H5Tunregister(). A new `persistence' argument
was added to differentiate between the two types of conversion
functions.
The application is allowed to register a hard conversion
function for the no-op conversion path although the library
isn't obligated to call it (it usually does). This is mostly
for completeness, but the application might use it to help
determine if the raw data pipeline was able to use the
optimized path for the case when no type conversion is
necessary. The library doesn't allow this path to be
unregistered although the application can redefine it as often
as it likes.
Fixed the type conversion tables in preparation for MT-safety
and to fix previosly-known design bugs wrt. unregistering
conversion functions or changing the C function associated
with a conversion path. The MT-safety stuff is documented in a
separate white paper.
Increased the conversion function debugging name from 9
characters to 31 characters so the output can be more
descriptive.
Moved conversion path statistics from the H5T_cdata_t member
into the conversion path itself. This makes H5T_cdata_t
contain only application-visible data structures.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
Improved the way type conversion functions are called so the
caller doesn't have to check for data type debugging and
increment type conversion timers and statistics.
Changed check for no-op conversion since it is now
application-definable and there may even be more than one
definition at a time in a multi-threaded application (one
thread might be using the no-op conversion path when some
other thread changes its definition -- the first thread still
sees the original defintion until it's done with the
operation).
./doc/html/Datatypes.html
Updated the user guide to reflect the changes to data type
conversion registration functions.
./bin/trace
./src/H5.c
Added tracing support for the new H5T_pers_t data type.
./test/dtypes.c
Added printf to display alignment value if non-aligned data
types are being tested.
./test/h5test.c
Modified the H5Tunregister() calls to use the new
arguments. All 94 of those calls can be replaced by a single
call to the new H5Tunregister() function.
./src/H5.c
Added HAVE_GETTIMEOFDAY around an auto variable and
initialized the elapsed time to zero when gettimeofday() is
not available.
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
Added an H5*_init() functions which do the same thing as
H5*_init_interface() but can be called from other packages and
don't do anything if the interface is already initialized.
This fixes a couple memory leaks in applications that
repeatedly close and open the library with H5close().
./src/H5Tconv.c
Optimized some data alignment code in the hardware conversion
functions.
Hardware conversions accumulate statistics about source and
destination data alignment and print that information when the
conversion function is unregistered (usually when the
application exits) if data type debugging is compiled into the
library and enabled at run-time.
The conversion caching was cleaned up for the compound data
type conversion function. It now caches conversion paths in a
manner that will be MT-safe and is much simpler than the old
method. Also cleaned up some array index maps.
./src/H5detect.c
Fixd mispelling of alingemnt.
./src/H5private.h
Changed `TRUE' to `1' in assignment to interface_initialize_g
in FUNC_ENTER macro definition.
./tools/testh5dump.sh
Completely rewritten to make it shorter, better documented,
and conforming to most of the other test outputs.
The comparison of the actual output with the expected output
is insensitive to differences in white space. The test now
passes for the first time on Linux where the output width
wasn't as expected but the output was otherwise correct.
./tools/testfiles/tall-1.ddl
./tools/testfiles/tall-2.ddl
./tools/testfiles/tall-3.ddl
./tools/testfiles/tattr-1.ddl
./tools/testfiles/tattr-2.ddl
./tools/testfiles/tattr-3.ddl
./tools/testfiles/tattr-4.ddl
./tools/testfiles/tcomp-1.ddl
./tools/testfiles/tcomp-2.ddl
./tools/testfiles/tcomp-3.ddl
./tools/testfiles/tcomp-4.ddl
./tools/testfiles/tdset-1.ddl
./tools/testfiles/tdset-2.ddl
./tools/testfiles/tdset-3.ddl
./tools/testfiles/tdset-4.ddl
./tools/testfiles/tgroup-1.ddl
./tools/testfiles/tgroup-2.ddl
./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tlink-1.ddl
./tools/testfiles/tlink-2.ddl
./tools/testfiles/tlink-3.ddl
./tools/testfiles/tlink-4.ddl
./tools/testfiles/tlink-5.ddl
./tools/testfiles/tslink-1.ddl
./tools/testfiles/tslink-2.ddl
Changed `../h5dump' to just `h5dump'.
./config/alpha-dec-osf4.0
Added more warning and optimization switches to the native
compiler.
----------------------
./src/H5T.c
Fixed a typo in the registration of the `unsigned char' to
`unsigned long long' type conversion that caused it to not be
registered, falling back to software whenever that conversion
path was taken.
./MANIFEST
./test/Makefile.in
./test/testhdf5.c
./test/testhdf5.h
./test/theap.c [REMOVED]
./test/lheap.c [NEW]
./test/tohdr.c [REMOVED]
./test/ohdr.c [NEW]
./test/tstab.c [REMOVED]
./test/stab.c [NEW]
Removed the `t' from the front of these names and made each
test a stand-alone program following the format of most of the
other tests.
./test/big.c
Uses libh5test.a but always sets the low-level driver to 1GB
file family.
The `#if' near the top to set the data space to 8GB has been
simplified now that `long_long' is always defined and the
error message is improved when `long_long' isn't wide enough.
Cleanup code was added to the error handling.
./test/gheap.c
./test/istore.c
Uses libh5test.a. Added error cleanup code.
./test/dtypes.c
./test/h5test.c
Added 68 new tests that check hardware and software
conversions between `long long' and `unsigned long long' and
the other integer types. The tests only run on machines where
sizeof(long_long)!=sizeof(long). We test a total of 180
different integer conversions, half in hardware and half in
software.
Cut down the number of times each test is run from 5 to 1 so
it doesn't take so long. If you want to run more times
there's a constant that can be changed at the top of the file.
./test/extend.c
Removed unused variable.
./test/h5test.c
./test/h5test.h
./test/external.c
./test/fillval.c
The h5_cleanup() returns true/false so it can be used in an `if'
statement to clean up additional files.
./doc/html/Environment.html
Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions.
./src/H5P.c
Changed the trace type for the second argument from `Iu' to
`x' since it's an output parameter.
./INSTALL
Added a warning that the GNU zlib that comes with the latest
version of HDF4 is too old to use with HDF5 and must be
renamed so configure doesn't see it when `--enable-hdf4' is
used.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
./COPYING
Reformatted as text instead of C. Removed zlib crew from the
list of contributors since no zlib code is actually in the
hdf5 library.
./INSTALL
./INSTALL.ascired
./MANIFEST
Minor updates for Beta release including version number
change.
./INSTALL_MAINT
Added information about making a release.
./RELEASE
Updated function list based on public header files.
./bin/checkposix
Got rid of complaints about some obvious things.
./doc/html/H5.api.html
./doc/html/RM_H5F.html
./src/H5F.c
./src/H5Fpublic.h
./test/tfile.c
Changed H5Fget_create_template() and H5Fget_access_template()
to H5Fget_create_plist() and H5Fget_access_plist() since that
conforms better to lots of other names.
./doc/html/Datatypes.html
./doc/html/ExternalFiles.html
./doc/html/Files.html
./doc/html/H5.api.html
./doc/html/H5.sample_code.html
./doc/html/RM_H5F.html
./doc/html/RM_H5Front.html
Changed `template' to `property list', etc.
./doc/html/Ragged.html [NEW]
Documentation for ragged arrays.
./src/H5Iprivate.h
./src/H5Ipublic.h
./src/H5I.c
Changed the scope of some symbols to be more local.
./src/H5.c
./src/H5AC.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5I.c
./src/H5O.c
./src/H5Ocomp.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5P.c
./src/H5S.c
./src/H5Shyper.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5V.c
./src/H5Z.c
./src/H5private.h
Fixed some violations of our naming scheme by adding HD to the
beginning of all Posix functions.
----------------------
./MANIFEST
Alphabetized. `d' comes before `e' :-)
./bin/release
Added the `-batch' option which causes the script to not ask
questions and to automatically update the minor version
number and set the patch level back to `a'. This is intended
to be used for the daily snapshots:
#! /bin/sh
set -e
cd ~/hdf5
make distclean
make test
bin/release -batch tar compress gzip bzip2
mv ./releases/* /repository
./src/H5Z.c
Removed warnings about unused variables when the zlib.h header
file is present but libz.a isn't.
./INSTALL
./configure.in
./doc/html/tracing.html
Made API tracing the default (you still need to define the
HDF5_TRACE environment variable to get results) and change the
name from `--disable-tracing' to `--disable-trace' to make it
consistent with the other switches.
Changed `site config file' to `host config file' to match the
documentation.
./doc/html/H5.user.html
Added a reference to the `tracing.html' file.
./INSTALL_MAINT
./README
./RELEASE
Partially updated for second alpha, but haven't updated
version numbers yet.
./src/H5.c
./src/H5A.c
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5I.c
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5T.c
./src/H5Tconv.c
./src/H5detect.c
./test/hyperslab.c
./test/istore.c
Changed memory allocation functions so they fail instead of
dumping core. The `x' was removed from the name to remind us
of that: H5MM_xmalloc() -> H5MM_malloc(), etc.
H5MM_calloc() takes one argument like H5MM_malloc() instead of
two like calloc() because we almost always called it with `1'
for one of the arguments anyway. The only difference between
the two functions is that H5MM_calloc() returns memory which
is initialized to zero.
./src/H5Gent.c
./src/H5Gprivate.h
Removed H5G_ent_calloc() since it wasn't used.
./src/H5Fistore.c
Fixed a bug found by Albert. Thanks, Albert! This fix
combined with the changes to memory allocation prevent the
library from failing an assertion if the application uses an
unreasonable size for chunks (like Alberts 10000x10000x4).
./src/H5MF.c
./src/H5MFprivate.h
Changed H5MF_free() to H5MF_xfree() since calling it with an
undefined address is allowed.
Documentation (mostly)
Solution:
Parallel HDF5 support on Intel TFLOPS machine using PFS file system
and MPIO.
Platform tested:
Intel TFLOPS (ASCI Red)
----------------------
./bin/release
./src/H5.c
./src/H5private.h
./src/H5public.h
./src/H5Fpublic.h
Changed the version number constants to names that begin with
H5_VERS_ and added macros that check that the version numbers
in the include files match the version number of the library.
./MANIFEST
./html/H5.user.html
./html/Version.html [NEW]
./html/version.obj [NEW]
./html/version.gif [NEW]
Documented version numbers and the macros, constants, and
functions associated with them.
./bin/versinc
A perl script that increments the minor version number and
sets the patch level back to zero. This is intended to be
invoked from the top of the source tree by a cvs commit
anywhere in the source tree. Quincey?
./src/H5O.c
./src/H5Oprivate.h
Added H5O_count() to count the number of object header
messages of a particular type. Quincey needs this for the
attribute package.
./test/dsets.c
Fixed warnings. Enabled the small strip-mine buffer test.
./config/linux
Added optimizations for the Pentium-Pro for production mode.
----------------------
./INSTALL
./INSTALL_MAINT
Updated installation instructions.
./html/Big.html [NEW]
A guide to using big datasets on small machines.
./MANIFEST
Added Big.html and INSTALL.ascired.
./html/Datasets.html
./html/Dataspaces.html
./html/Datatypes.html
./html/Files.html
./html/H5.api.html
./html/H5.intro.html
./html/H5.sample_code.html
./html/H5.user.html
Updated documentation by changing lots of `size_t' arguments
to `hsize_t'. Added line numbers to some examples.
./html/H5.intro.html
Perhaps someone want's to volunteer to make this file
human-readable?
----------------------
./INSTALL
Added instructions for which C flags to set for debugging.
./src/H5C.c
./src/H5Cpublic.h
H5Cset_chunk() takes const pointer.
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
Added H5Dextend() to extend the dimensions of a dataset.
./src/H5Osdspace.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
./test/cmpd_dset.c
./test/dsets.c
./test/th5p.c
Added the optional `maxdims' argument to H5Pcreate_simple()
and defined constant H5P_UNLIMITED which can appear in the
maxdims. Added `const' to arguments.
Implemented H5Pcopy()
Removed the unused file argument from H5P_modify.
Added H5P_extend().
Removed the `flags' field from simple data types and we
determine if the `max' or `perm' arrays are valid by looking
at the pointer. Cleaned up the H5O_sdspace_debug output.
./src/H5T.c
Fixed a printf format.
./MANIFEST
./test/Makefile.in
./test/extend.c [NEW]
Added a test for multi-dimensional unlimited dimensions.
----------------------
./INSTALL
./Makefile.dist
./Makefile.in
./config/conclude.in
Some stupid make's don't know what PHONY means. I added
changed config to _config in the default makefile and added
_test to the other makefiles.
./src/H5Psim.c
A `file_offset' argument got changed to `int' accidently that
causes tests to fail on 64-bit machines. I changed it back to
size_t.
./src/H5T.c
Changed a couple printf formats.
----------------------
./INSTALL
./INSTALL_MAINT
./README
Updated installation instructions for hdf-5.0.0a.
./RELEASE
Updated release notes. Needs more work.
./bin/release
The tarballs include the name of the root directory like
hdf-5.0.0a so it doesn't have to be explicitly created when
the files are extracted.
./src/Makefile.in
Added H5Ffamily.c and H5Fsplit.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Added `const' to sublass arguments.
./src/H5F.c
./src/H5Flow.c
./src/H5Fsec2.c
Make sure file buffers get flushed during a call to
H5Fflush(). Check for overflow in address encoding and decoding.
./src/H5Ffam.c
./src/H5Fprivate.c
./test/istore.c
Implementation of file families so 32-bit machines can access
64-bit files.
./src/H5Oprivate.h
Removed H5O_NO_ADDR constant.
./config/freebsd2.2.1
./config/linux
Added -DH5G_DEBUG and -DH5F_DEBUG to the list of debugging flags.
./html/H5.format.html
Changed some <offset>-sized things to <length>-sized things.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Bprivate.h
./src/H5C.c
./src/H5D.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gshad.c
./src/H5Gstab.c
./src/H5H.c
./src/H5Hprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Oistore.c
./src/H5Oprivate.h
./src/H5Ostab.c
./src/H5Ostdst.c
./src/H5pivate.h
./src/debug.c
./test/istore.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
Lots of changes caused by generalizing addresses. The haddr_t
is now a struct, so you can no longer perform arithmetic on
it. But since it's small, simple, and often used, storage is
allocated like with an integer. But we always pass them
around by reference. That is, when using an address in
another struct, allocate space:
struct my_struct {
char *name;
haddr_t address;
} x;
But when passing it to a function, pass by reference:
H5F_addr_print (stderr, &(x.address));
Addresses should be initialized with
H5F_addr_undef (&(x.address));
Functions for operating on addresses are in H5Flow.c and begin
with H5F_addr_... Functions never return haddr_t or haddr_t*;
they always pass them through arguments instead. A function
that returns an address through an argument does so with its
last argument and it is marked with `/*out*/'. Calls to such
functions also mark output-only arguments with `/*out*/'
./src/H5Fsplit.c (new)
A two-member family where all meta data goes in the first
member and all raw data goes in the second member.
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5Gnode.c
./src/H5H.c
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
Differentiate between meta data storage and raw data
storage. Provide a mechanism so that the file driver can
extend the file to allocate more memory.
./src/H5E.c
./src/H5Epublic.c
Added the error H5E_TRUNCATED to be reported when the file is
shorter than the length recorded in the boot block.
./src/H5F.c
Added H5F_locate_signature() so we only do it in one place
now.
./INSTALL
./INSTALL_MAINT
Just a couple clarifications.
./html/ExternalFiles.html
./html/storage.html
Documents how external files work.
./test/hyperslab.c
./test/istore.c
Fixed printf's on 64-bit machines.
./test/istore.c
Added ifdef's to test the split file driver.
Instructions for end users.
./INSTALL_MAINT NEW
Instructions and hints for maintainers.
./MANIFEST NEW
A list of names of files that are part of the HDF5
distribution.
./Makefile.in NEW
Top-level makefile template. See INSTALL and/or INSTALL_MAINT
for instructions on how to generate the Makefile from this
file.
./configure NEW
./configure.in NEW
Configuration shell script generated from configure.in.
./Makefile
Removed from CVS. This file is now generated by running
configure.
