----------------------
./tools/h5ls.c
Added a `--address' (`-a') switch which causes h5ls to display
file addresses for raw data. For contiguous datasets it's just
a nice simple number, but for chunked datasets it's a list of
logical dataset coordinates, file addresses, filter masks, and
storage sizes.
Changed `--dump' switch to `--data'.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
Enhanced the indexed-storage B-tree iterator so it can dump
raw data addresses (and other info) to the standard error
stream.
Added H5Ddebug() so h5ls has a way to dump addresses for
datasets. I'm not sure what else this API function should do,
so I think we should discuss it before we document it. So far,
h5ls is the only thing that uses it, and we can easily change
that.
./src/H5Tconv.c
./test/dtypes.c
Finally had a chance to verify Paul's H5T_conv_s_s (general
string to string conversions) bug fixes and incorporate them
into H5T_conv_f_f (general floating-point to floating-point
conversions) and H5T_conv_i_i (general integer to integer
conversons). Thanks Paul.
./src/H5D.c
./src/H5S.c
./src/H5Sprivate.h
Added performance timers around data space read and write
callbacks. They were already there for the gather/scatter
callbacks.
The timings for read/write callbacks are displayed along with
gather/scatter when data space debugging is turned on.
./bin/iostats
Updated to print totals. Added a `--fast' option that doesn't
do any output except the totals and is much faster.
./bin/trace
Changed __unused__ to UNUSED to match source code.
./config/gnu-flags
Updated error message for pgcc. I've sent bug reports to the
pgcc people but the new version still has the same bug.
./configure.in
./config/conclude.in
./config/depend.in
Fixed dependencies for non-GNU makes when run in a directory
other than the hdf5 source tree.
Updated GNU `make dep' rules to copy the distributed
dependencies for non-GNU makes into the source tree when run
in some other directory.
Bug fix
Description:
dumper repeated output after the 1st 4 rows.
The bug was because the dumper was reading just a small slice a time
from the file dataset but did not adjust the offset in the file-space.
So, it just kept reading the same first slice.
Solution:
Stole the offset-adjustion code from the routine that h5ls uses.
Platform Tested:
O2K.
----------------------
./tools/h5tools.c
./tools/h5tools.h
Finally fixed a long-standing bug that caused core dumps if
a compound datum rendered to more than some number of
characters (we kept bumping up the limit at the risk of
violating stack size limits on some machines). The fix works
only on systems that have the vsnprintf() function (otherwise
a 4kB limit is imposed, which if violated probably dumps
core). If vsnprintf() is present then the library dynamically
allocates space for the output string.
Also made it possible to control how compound data is rendered
across multiple lines of output by allowing the caller to
specify where optional line-breaks get inserted. The output
functions split up the value at one or more optional
line-breaks to prevent it from wrapping around the screen.
If a datum doesn't fit on the current line but would fit on
the next line then it is printed on the next line regardless
of whether optional line-breaks would have prevent wrapping
around the screen. This makes it easier to find the beginnings
of compound data values. This feature is disabled by default
but can be enabled by the application.
If a datum doesn't fit on the current line and the previous
datum also occupied more than one line then we move to the
next line before printing. This makes it easier to find the
beginnings of compound data values but prevents the output
from looking fragmented if there are only a few long values
among mostly short values. This feature is disabled by
default but can be enabled by the application.
The application can control the printf() formats used for all
the native data types. The defaults are what the library used
to use: %g, %ld, %lu, %d, and %u
./tools/h5ls.c
Compound datatype values can now be split across multiple
lines of output instead of just wrapping. Also, when lots of
compound values are too long they all start at the beginning
of a line. This only required about 10 lines of changes in the
setup for tools library calls (I didn't modify the h5dump
program because it uses its own version of the tools library
that forked off long ago).
Added code for Win32 which is unable to cast `unsigned long
long' to `double'. If the dataset size exceeds (2^63)-1 then
the percent utilization is not displayed (this is easily
possible with chunked datasets). This is untested yet.
./configure.in
./src/H5config.h.in
./src/H5.c
./src/H5private.h
Check for vsnprintf() and provide a simple, stupid definition
if it isn't available. The stupid definition just calls
vsprintf() and ignores the second argument. This can result in
buffer overflows in h5ls and h5dump since vsprintf() is an
unsafe function (and anyone can create an hdf5 file that runs
an arbitrary command from h5ls and h5dump in that case)!
./config/conclude.in
Remove more *.o files for `make clean'
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
Cleaned up a memory leak during H5_term_library() by allowing
H5I_clear_group() to skip items that couldn't be freed. This
allows the item to remain in the group until we can free it
later.
./src/H5F.c
The H5F_close_all() function fails if a file cannot be closed.
----------------------
./config/commence.in
./examples/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Fixed some dependency problems in Makefiles. If the library
version is updated then everything gets recompiled.
./src/H5G.c
./src/H5R.c
Failure return value for object type functions is now
H5G_UNKNOWN as documented.
./src/H5Shyper.c
./src/H5Spoint.c
Fixed an unused argument warning.
./tools/h5debug.c
Fixed a call to H5F_block_read() since the 4th argument is
different now.
./tools/h5ls.c
Added a space between the object name and class to make the
output readable when the object name is longer than 24
characters.
C
----------------------
./config/depend.in
Fixed automatic dependencies. We were storing dependencies for
*.o files instead of *.lo files after shared libraries were
added.
./config/gnu-flags
./config/linux-gnulibc1
Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from
the linux file to this file and caused it to depend on the CPU
name. This fixes one of Elena's bugs.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5P.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Tpublic.h
./test/istore.c
Added an H5Dget_storage_size() function that reports the
amount of storage allocated for raw data in a dataset.
Changed H5D_xfer_* to H5F_xfer_* because these properties are
more general than datasets. This also allows some of the
lower-level I/O functions to get this information easier.
./src/H5S.c
./src/H5Sall.c
Added two new functions H5S_all_read() and H5S_all_write()
which are optimizations that copy data directly between file
and memory without having to go through the scatter gather
step. This knocks quite a bit of time off the I/O and
reading/writing entire datasets is a fairly common operation.
./tools/h5ls.c
Reports the logical size of data, the allocated size of data,
and the percent utilization.
./MANIFEST
Removed old pablo files, added new files. Snapshots should now
start to work again.
./src/H5D.c
./src/H5Fmpio.c
Removed two warnings signed vs. unsigned comparisons and check
for overflow.
----------------------
./config/commence.in
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
Fixed so private libraries are not installed publicly.
The installation directories `bin', `include', and `lib' are
created mode 755.
./src/H5.c
./src/H5A.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Vprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
./test/chunk.c
./test/dsets.c
./test/dtypes.c
./test/h5test.c
./test/overhead.c
./test/ragged.c
./test/tattr.c
./tools/h5dump.c
./tools/h5findshd.c
./tools/h5ls.c
Changed `__unused__' to `UNUSED' to fix a conflict with GNU
header files.
./src/H5Tpkg.h
./test/h5test.h
Removed __unused__ from forward function declarations.
./src/H5P.c
Removed a comment about restrictions for the type conversion
temporary buffers. Thanks to Quincey, the comment no longer
applied.
./src/H5T.c
Relaxed the H5Tpack() a little so it would pack compound data
structures that had non-transient atomic members.
./tools/h5ls.c
Added a `-g' (or `--group') flag that causes information to be
printed about the specified group instead of the group's
contents. (sort of like Unix's `ls -d'). The `-g' can be used
in combination with `-r' to print information about the group
and its contents.
New feature
Problem:
The h5toh4 converter tester - testh5toh4, is set up to place output
files in same directory as input files. A difficulty comes up when
the input files come off a write-protected media, such-as CDROM.
Solution:
Rather than using "cd" to change directory and referencing files by
short filename only, "input directory" and "output directory" are
defined explicitly, and files are always referenced with pathnames
included. For cases when the converter generates the output filename,
a copy of the input file is first placed in the "output directory".
The copied input file is used by h5toh4 and then removed.
On Solaris2.5, the following sequence of commands seemed to work fine:
$ gunzip < hdf5-1.1.72.tar.gz | tar xf -
$ chmod -R ugo-w hdf5-1.1.72
$ mkdir build
$ cd build
$ ../hdf5-1.1.72/configure --enable-production --disable-debug \
$ --with-hdf4=... --with-zlib=...
$ make check
This change should allow the tester to be used when the hdf5 source
is on a read only media like a CDROM.
Platform tested:
Solaris2.5
./configure [REGENERATED]
./src/H5D.c
./src/H5O.c
Removed H5AC, H5B, and H5T from the default list of packages
to debug (because they're pretty expensive debugging), and
added H5O. Also fixed a bug for undefined variable in H5D when
H5S debugging is turned on but H5T debugging is turned off.
./config/conclude.in
Fixed installation of header files for building in a directory
other than the source directory. This fixes a bug where
H5config.h wasn't being installed.
./src/H5.c
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Tprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Changed the way the library shuts down again. Now it handles
cycles between packages and isn't so sensitive to dependencies
between packages. A package might shut down only to be
restarted to process a request from some other package being
shut down. Loops are detected after 100 iteractions and the
shutdown is aborted with a message on standard error. This
also makes it a lot easier to debug.
./src/H5A.c
Fixed H5A_write() and H5A_read() so they pass a non-null
background buffer to the conversion functions. This is
necessary when an attribute has a compound data type.
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
Reindented new Win32 stuff.
./src/H5Odtype.c
Fixed a bug when enumeration types are used in a compound data
type. The byte pointer wasn't incremented after the type
information was written.
./tools/h5ls.c
Compound data types display their total size because it's not
always obvious from looking at the members.
Scalar attributes show their space as `scalar' instead of
`{}'.
The index value is not printed for attributes that have only a
few values. Instead the word `Data:' is printed on the first
line of attribute data.
Named types display their data type only if verbose output was
requested.
----------------------
./configure.in
./configure [REGENERATED]
./config/commence.in
A few tweaks to the makefile rules for rebuilding makefiles.
./src/H5detect.c
Fixed a really stupid mistake: resetting the signal handler
after a longjmp(). This should fix Bob's SIGBUS on Solaris.
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
Temporarily commented out the code that tries to link a simple
MPI-IO application because I'm not sure how to pass $LDFLAGS
and $LIBS to the compiler.
Removed the `--enable-parallel=ibm' switch because the library
we link with is either -lmpcc or -lmpcc_r but not both. The
only way to tell is to see what compiler was specified (mpcc
or mpcc_r) but if that compiler is specified then we don't
need any libraries (the compiler script supplies them). That
leaves just two choices: the user must use a compiler script:
CC=mpcc ./configure
or the user must state which library is desired:
LDFLAGS='-lmpcc' ./configure --enable-parallel
Checks for <setjmp.h>, longjmp(), and signal(). We don't check
for setjmp() because it could be a macro (in fact, Posix
requires it to be a macro) and if longjmp() is present then
setjmp() is probably present too ;-)
./src/H5detect.c
The alignment detection loop uses SIGBUS and setjmp/longjmp
instead of fork/wait in order to get around bugs with forking
in conjunction with mpich. This hasn't been tested on the
SP-2 yet but it does work on the DEC Alpha.
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Changed the order that libraries are linked so -lhdf5 is
always before $LDFLAGS.
----------------------
./configure.in
./configure [REGENERATED]
The path for a command is calculated explicitly the hard way
because `type -path' isn't portable.
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc2
Changed the way files reference each other.
./config/gnu-flags [NEW]
./config/dec-flags [NEW]
These files figure out what flags to pass to certain compilers
so we can reuse code in more than one config/* file. They
also have better warning messages when old compilers are used.
./config/linux-gnulibc1
./config/dec-osf4.x
These files use the new *-flags files.
./src/H5D.c
./src/H5Onull.c
./src/H5Tconv.c
./tools/h5ls.c
Fixed a compiler warning.
./src/H5detect.c
Added a better comment to the top of the generated file.
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./config/irix64
The old (-32) compiler is now supported by setting envrionment
CC='cc -32'. The -64 compiler is the default or you can set
CC='cc -64'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5G.c
./src/H5I.c
./src/H5Ocomp.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Z.c
./src/H5detect.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/enum.c
./test/mtime.c
./test/ohdr.c
./tools/h5ls.c
Fixed lots of warnings on Irix64. Mailed a few remaining
warnings in H5S to Quincey and a few in the dumper to
Ruey-Hsia.
Bug Fixes
Problem:
Warnings given during compilation on some machines.
Solution:
Take care of various Compiler Warnings such as:
1) uninitialized variables;
2) unreachable statements.
Platforms tested:
Solaris2.5, Linux, Irix6.5
----------------------
./configure.in
./acconfig.h
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5public.h
./src/H5Omtime.c
Check for <stddef.h>
Checks for `__tm_gmtoff' in `struct tm' because old versions
of GNU libc are different than recent versions. This fixes the
failing mtime test.
./bin/config.guess
./config/freebsd2.2.7 [REMOVED]
./config/freebsd [ADDED]
Changed the name so it works with all versions of FreeBSD.
./src/H5.c
Moved H5F after H5T and H5G in H5_term_library() to satisfy
dependencies.
./src/H5G.c
Fixed a bug that caused H5Gcreate() to fail if the group name
had trailing slashes.
./src/H5Gpublic.h
Changed `group_name' to `name' in a prototype.
./src/Makefile.in
Dynamic library on Linux, but needs for work to be generally
useful.
./src/H5HG.c
./src/H5HGprivate.h
Fixed alignment problems when using old GCC compilers (like
the one shipped with RedHad Linux).
./tools/h5ls.c
Fixed a bug where the contents of the root group could be
listed twice if there was a link back to the root
group. Similarly for groups that are mentioned on the command
line.
Fixed a bug where unknown types were printed with a random
type class number.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
Fixed O(log N) conversion bugs.
Bug fix
Problem:
Did a H5get_type() on a dataset of committed type without doing
the associated H5Tclose(). This caused an abort to occur during the
atexit() phase of the h5toh4 converter.
Solution:
Execute the associated H5Tclose().
Platform tested:
Solaris2.5
Bug fix
Problem:
The hdp dumper output files used in the h5toh4 converter test
program have the result of the latest changes to the HDF4 library,
but the converter was to maintain compatability with HDF4.1r2.
Solution:
Regenerate the HDF4.1r2 version of the hdp dumper ouput files to
be used for the h5toh4 converter test program.
Platform tested:
Solaris2.5
New feature
Solution:
Modified h5dumptst.c to generate more single dimension
datasets of H5T_STRING type held in file tstr2.h5.
Platform tested:
Solaris2.5
New feature
Solution:
Changes to support conversion of 1-dimensional HDF5 datasets of
H5T_STRING type into HDF4 Vdatas. Also, support conversion of
HDF5 attribute of string type into HDF4 attribute of INT8 type.
Dimensional information is lost.
Platform tested:
Solaris2.5
----------------------
./tools/h5tools.c
Strings are not converted to null-padding before being
printed; they are printed with whatever byte values appear in
the file.
./tools/h5ls.c
Now able to display attribute data type and data.
Added a `-f' or `--full' switch which causes the full name of
each object to be displayed instead of just the base name.
Added a `-r' or `--recursive' switch that recursively prints
the contents of groups, avoiding cycles.
More bulletproofing for non-printable characters in things
like object names, attribute names, and comment strings. We
don't want listing a file to send termal escape sequences
because it's sometimes possible to execute commands that way.
Since h5ls doesn't usually use quotes around object names we
must sometimes escape space characters.
External files are listed in a table to make the output less
confusing.
./tools/h5tools.c
./tools/h5tools.h
Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also
make h5dump_fixtype() public.
./test/dtypes.c
Wrote some data to an attribute to test h5ls attribute
printing.
./src/H5ACprivate.h
./src/H5Apublic.h
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5Epublic.h
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gprivate.h
./src/H5HLprivate.h
./src/H5Oprivate.h
./src/H5Ppublic.h
./src/H5RApublic.h
./src/H5Rpublic.h
./src/H5Spublic.h
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5Vprivate.h
./src/H5Zpublic.h
./src/H5private.h
./src/H5public.h
Reindented function prototypes after `HDF5API' was added. Also
rewrapped long lines.
./src/H5Flow.c
Added an `#ifdef WIN32' around an unused variable.
./src/H5api_adpt.h
Removed extra carriage returns inserted by "broken" operating
system.
./src/H5Dprivate.h
./src/H5Oprivate.h
./src/H5Vprivate.h
./src/H5private.h
Removed extraneous inclusion of H5api_adpt.h since it's
included in H5public.h which is included by everything.
./src/Makefile.in
Added H5api_adpt.h to the list of public header files to fix
broken `make install'.
----------------------
./tools/h5tools.c
Strings are not converted to null-padding before being
printed; they are printed with whatever byte values appear in
the file.
Bug fix
Problem:
Segmentation fault when attempting to free NULL or uninitialized pointers.
Problem noticed on Linux and HPUX10.20 platforms.
Solution:
Initialialize the pointer to NULL. Execute the "free" statement
upon the condition that the pointer is not equal to NULL (i.e. after the
allocation has taken place.)
Platform tested:
Linux, HPUX10.20, Solaris2.5
Conform closer to other test print-out.
Solution:
Added "All h5dump tests passed." statement to output
of testh5dump.sh when appropriate. Similarly, added
"All h5toh4 tests passed." statement to output of
testh5toh4 when appropriate.
Also, added the testing of converting H5 files with
loop pathways into H4 files with recursive references.
Platforms tested:
Solaris2.5, Digital Unix 4.0
Conform closer to other test print-out.
Problem:
Multiple "PASSED" statements for single test results when test involves
conversion of multiple files. Should be single "PASSED" statement for
test results.
Solution:
"*FAILED*" statement given if conversion fails for any file. Differences
given between expected results and actual results for each file that fails.
"PASSED" statement given when conversion is successful for all files.
Platform tested:
Solaris2.5
New feature, Documentation
Solution:
Changed h5toh4 testing output to more closely resemble other HDF5
testing output.
Also added documentation to describe the puposes of the
conversion test files.
Platform tested:
Solaris2.5
Features of this version of dumper
* loop detection
* data type
** atomic type
-> H5T_INTEGER (H5T_STD_XXXXX)
-> H5T_FLOAT (H5T_IEEE_XXXXX)
-> H5T_STRING (H5T_C_S1, H5T_FORTRAN_S1)
** committed/transient/unamed compound type
* data space
** scalar space
** simple space
* dataset
dumper can display dataset's
** attribute
** type
** space
** data
* group
dumper can display group attributes and group members which include
** named/unamed data type
** group
** dataset
** softlink
* attribute
dumper can display attribute's
** type
** space
** data
* hard link
* soft link
* format of data
** fit on 80 columns
** end of line after each row
(more work will be done on data.)
Problems:
There were three separate bugs in the h5toh4 converter worked on.
They were:
1) When a loop was detected, the H4 file was missing references
to paths which were available in the H5 file.
2) When an H4 SDS or Vdata was created from a H5 dataset, the H4
object was referenced in the root group, instead of the correct
Vgroup.
3) The FIRST path taken to an object for the h5toh4 conversion
could not involve a SOFTLINK.
Solutions:
The bug fixes were:
1) All of the associated references to available paths which
occur in the H5 file, now appear in the H4 file.
2) After an H4 SDS or Vdata is created from a H5 dataset, the H4
object is tag/ref'ed in the appropriate Vgroup.
3) The FIRST path taken to an H5 object for the H5toh4 conversion
may involve a HARDLINK, a SOFTLINK, or neither. The same is
true of any additional paths to the same object.
Platform tested:
Solaris2.5
New feature
Solution:
Added some new new tests to show that paths involving HARDLINKS
and paths involving SOFTLINKS convert existing objects from H5 to
H4 the same way that paths involving no links does.
Platform tested:
Solaris2.5
----------------------
./INSTALL
Added warning that enabling debugging code can adversely
affect performance even when the debugging isn't turned on at
run-time. Performance testing shows that under certain
circumstances (like data type conversions of compound types)
the H5_timer functions, although only a few lines each,
contribute a fairly large percent to the execution time.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Improved the H5Tunregister() function to make unregistering
more flexible. It takes the same arguments as H5Tregister()
but also accepts wild cards. All conversion functions that
match the H5Tunregister() search criteria are removed from the
global type conversion table.
The H5Tregister_hard() and H5Tregister_soft() were combined
into a single function called H5Tregister() which is the
counterpart to H5Tunregister(). A new `persistence' argument
was added to differentiate between the two types of conversion
functions.
The application is allowed to register a hard conversion
function for the no-op conversion path although the library
isn't obligated to call it (it usually does). This is mostly
for completeness, but the application might use it to help
determine if the raw data pipeline was able to use the
optimized path for the case when no type conversion is
necessary. The library doesn't allow this path to be
unregistered although the application can redefine it as often
as it likes.
Fixed the type conversion tables in preparation for MT-safety
and to fix previosly-known design bugs wrt. unregistering
conversion functions or changing the C function associated
with a conversion path. The MT-safety stuff is documented in a
separate white paper.
Increased the conversion function debugging name from 9
characters to 31 characters so the output can be more
descriptive.
Moved conversion path statistics from the H5T_cdata_t member
into the conversion path itself. This makes H5T_cdata_t
contain only application-visible data structures.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
Improved the way type conversion functions are called so the
caller doesn't have to check for data type debugging and
increment type conversion timers and statistics.
Changed check for no-op conversion since it is now
application-definable and there may even be more than one
definition at a time in a multi-threaded application (one
thread might be using the no-op conversion path when some
other thread changes its definition -- the first thread still
sees the original defintion until it's done with the
operation).
./doc/html/Datatypes.html
Updated the user guide to reflect the changes to data type
conversion registration functions.
./bin/trace
./src/H5.c
Added tracing support for the new H5T_pers_t data type.
./test/dtypes.c
Added printf to display alignment value if non-aligned data
types are being tested.
./test/h5test.c
Modified the H5Tunregister() calls to use the new
arguments. All 94 of those calls can be replaced by a single
call to the new H5Tunregister() function.
./src/H5.c
Added HAVE_GETTIMEOFDAY around an auto variable and
initialized the elapsed time to zero when gettimeofday() is
not available.
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
Added an H5*_init() functions which do the same thing as
H5*_init_interface() but can be called from other packages and
don't do anything if the interface is already initialized.
This fixes a couple memory leaks in applications that
repeatedly close and open the library with H5close().
./src/H5Tconv.c
Optimized some data alignment code in the hardware conversion
functions.
Hardware conversions accumulate statistics about source and
destination data alignment and print that information when the
conversion function is unregistered (usually when the
application exits) if data type debugging is compiled into the
library and enabled at run-time.
The conversion caching was cleaned up for the compound data
type conversion function. It now caches conversion paths in a
manner that will be MT-safe and is much simpler than the old
method. Also cleaned up some array index maps.
./src/H5detect.c
Fixd mispelling of alingemnt.
./src/H5private.h
Changed `TRUE' to `1' in assignment to interface_initialize_g
in FUNC_ENTER macro definition.
./tools/testh5dump.sh
Completely rewritten to make it shorter, better documented,
and conforming to most of the other test outputs.
The comparison of the actual output with the expected output
is insensitive to differences in white space. The test now
passes for the first time on Linux where the output width
wasn't as expected but the output was otherwise correct.
./tools/testfiles/tall-1.ddl
./tools/testfiles/tall-2.ddl
./tools/testfiles/tall-3.ddl
./tools/testfiles/tattr-1.ddl
./tools/testfiles/tattr-2.ddl
./tools/testfiles/tattr-3.ddl
./tools/testfiles/tattr-4.ddl
./tools/testfiles/tcomp-1.ddl
./tools/testfiles/tcomp-2.ddl
./tools/testfiles/tcomp-3.ddl
./tools/testfiles/tcomp-4.ddl
./tools/testfiles/tdset-1.ddl
./tools/testfiles/tdset-2.ddl
./tools/testfiles/tdset-3.ddl
./tools/testfiles/tdset-4.ddl
./tools/testfiles/tgroup-1.ddl
./tools/testfiles/tgroup-2.ddl
./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tlink-1.ddl
./tools/testfiles/tlink-2.ddl
./tools/testfiles/tlink-3.ddl
./tools/testfiles/tlink-4.ddl
./tools/testfiles/tlink-5.ddl
./tools/testfiles/tslink-1.ddl
./tools/testfiles/tslink-2.ddl
Changed `../h5dump' to just `h5dump'.
./config/alpha-dec-osf4.0
Added more warning and optimization switches to the native
compiler.
New feature
Solution:
Testing of Extendable Dataset support in h5toh4 converter when
extendable dimension is first dimension.
Platform tested:
Solaris2.5
----------------------
./doc/html/Datatypes.html
./src/H5.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5detect.c
./test/chunk.c
./test/dtypes.c
./test/h5test.c
./test/mtime.c
./test/tattr.c
./test/th5s.c
./tools/h5dump.c
./tools/h5dumputil.c
./tools/h5import.c
./tools/h5ls.c
./tools/h5toh4.c
./tools/h5tools.c
Renamed the old H5T_NATIVE_CHAR type to H5T_NATIVE_SCHAR to
denote that it is always signed.
Added a new H5T_NATIVE_CHAR type which has the same range,
representation, and behavior as either H5T_NATIVE_SCHAR or
H5T_NATIVE_UCHAR depending on the compiler and its
command-line switches for the application source file which
references H5T_NATIVE_CHAR. If source files are compiled with
different switches then each source file will resolve
H5T_NATIVE_CHAR appropriately so it matches the C type `char'
in that source file.
NOTE: THERE ARE OTHER DOCUMENTATION FILES THAT I DIDN'T CHANGE
BECAUSE I CAN'T MODIFY THE SOURCE.
./test/extend.c
Swapped two lines to prevent diagnostic messages from messing
up the formatted output.
New Feature
SOLUTION:
h5toh4 is an H5 utility which converts HDF5 files into
HDF4 files. It converts only those H5 objects which have
have mappings into H4 objects.
Some H5 objects that may be converted into H4 objects are:
1) H5 group objects may be converted into H4 Vgroup objects.
2) H5 dataset objects of integer or floating point datatype
may be converted into H4 SDS objects.
3) H5 dataset objects of compound datatype and rank 1 may
be converted into H4 Vdata objects. Field members of the
compound datatype are constrained to be single dimensional.
Platforms tested:
Solaris2.5, HP10.20
New feature
Solution:
This file contains routines to find all shared objects and
committed types and store them in tables. These routines
are made available in the library hdf5/tools/libh5tools.a
Platform tested:
Solaris2.5, HP10.20
New Feature
Solution:
These files are the expected results of the HDF4 hdp dumper,
which has been executed in the following order:
hdp dumpvg file.hdf > file.dmp
hdp dumpvd file.hdf >> file.dmp
hdp dumpsds file.hdf >> file.dmp
Platform tested:
Solaris2.5, HP10.20
