Bug fix
Description:
Failed parallel tests now cause make to exit with an error.
Solution:
Edited config/conclude.am to throw an error if parallel test programs fail.
Platforms tested:
heping, modi4
Bug fix.
Description:
The previous way of detecting the MPICH version fails if the suspected
$CC does not give the expected MPICH version information. Though no
consequence, it generates error messages that alarm users.
Also, mpich2 gives the version information as if it were mpich v1.0.2
which was incorrectly included as an earlier version of the origianl
mpich.
Solution:
Implemented a more robust code to detect the version and narrow the
recognition down to v1.2.0-v1.2.5. Also, the code were duplicated in
two files (linux-gnulibc1 and ia64-linux-gnu). Combined them into a
new file called mpich.
Platforms tested:
Tested in heping using mpicc and mpich2/mpicc and also in tg-ncsa.
Misc. update:
Updated MANIFEST.
Description:
Add source code copyright notice; comment symbols vary by type of file.
Platforms tested:
No changes that should cause any problems. Nonetheless, the tree will
be checked out fresh and tests run immediately post-commit.
Bug fix
Description:
Fixed config file for apple powerpcs. Should detect xlf more
often (though not infallibly).
Should disable shared libraries when xlf is being used.
Solution:
Since neither xlf nor f95 have "version" options (which could
be used to identify which compiler is being used), the config
file checks if the fortran compiler is named 'xlf' (or /path/xlf).
If not, it assumes the compiler must be f95.
xlf is still the default if no compiler is named at all.
Platforms tested:
pommier (change only to mac-specific config file)
bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
Code cleanup
Description:
Removed Fortran type sizes from config/* files.
Solution:
These lines weren't doing anything anymore; they've been replaced by automatic
type generation. This is just housekeeping to remove them from
the config/* files.
Platforms tested:
mir, sol, modi4
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Description: The API function H5Tis_hard() which was recently checked
in has been renamed to H5Tcompiler_conv() to be more descriptive. No
other changes.
Platforms tested: fuss - simple change.
Misc. update: config/lt_vers.am to update libtool version.
Bug fix
Description:
A whole chunk of this file somehow got deleted and the heavily reduced
file was accidentally checked in. This is the complete version of the file, with the
mpiicc fix.
Solution:
Platforms tested:
Misc. update:
Description: Added -K c99 flag to sxc++ flags to ienforce C99 standard;
added cache values for getrusage and gethostname
Solution:
Platforms tested: SX-6
Misc. update:
Bug fix
Description:
Forgot to remove a debug statement before committing.
Solution:
The script printined out what it thought CC_BASENAME was for debugging.
Removed this print statement.
Platforms tested:
minor change, mcr
Misc. update:
Bug fix
Description:
Same bug as was just checked in for v16. Do the complicated
derived datatype check for compilers named mpiicc in addition to
mpicc.
Solution:
Platforms tested:
Misc. update:
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
Bug fixes
Description:
This checkin fixes an occasional error on kelgia on sol during distclean.
It also causes test scripts to depend properly on the programs they're
supposed to be testing.
Solution:
The kelgia bug was due to some files being cleaned by automake and manually.
Removed the manual cleaning in src/Makefile.am.
Test script dependencies now need to be specified manually, since the
makefile can't guess what they test from their name. Currently all test
scripts in a given directory have a single list of dependencies--this was
easy and seems to be sufficient.
These dependencies are listed in the SCRIPT_DEPEND variable in the Makefile.am.
Platforms tested:
heping, mir, modi4, sol
Misc. update:
Description: Added 2 new configure options, --enable-exception and --enable-accuracy.
--enable-exception lets the library check whether user's exception handling
functions are present during compiler data conversions and use them if they are.
When it's disabled, this step is skipped to improve conversion speed. This
step isn't implemented yet for soft conversions because there would be little
gain in speed.
--enable-accuracy guarantees data accuracy during data conversions. It means
the library will choose compiler conversions only if the accurate data is
secured. Otherwise, the library will go for the library's own conversions. If
this option is disabled, the library uses compiler conversions in favor of
their speed as long as they work even if data can be incorrect.
Platforms tested: h5committest and fuss. Some systems may fail after this
checkin.
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Update & feature
Added a new cached data conversion setting.
Added -DH5_FLOPS to CPPFLAGS for compiling. Had used the builtin
__PUMAGON__ but H5_TFLOPS is more meaningful.
Platforms tested:
Tested in Flops.
Misc. update:
Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Misc. update:
Port to Red Storm
Description:
Initial version to configure for SNL Red Storm. To configure for it, do
./configure --host=x86_64-redstorm-linux
Platforms tested:
Tested in Red-storm. Many things are still failing but this will
make the configure part easier.
Misc. update:
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fix
Description:
Update Makefiles now that docs are no longer in main hdf5 tree.
Solution:
Changed root-level Makefile.am not to recurse into docs tree.
Removed docs Makefiles from configure.in.
Removed config/commence-doc.am, since it is no longer used.
Platforms tested:
mir (change to Makefiles only)
Bug fixes
Description:
A number of minor changes to Makefiles. Some files will now be cleaned
properly, some comments are more informative, etc.
Platforms tested:
heping, mir, modi4
Updating phase 2 work of collective IO
Description:
When the size is bigger than some value for MPI derived data type, mpich 1.2.5 and lower
version won't work any more, so in the configuration file, we will check the version number
and switch from collective IO to independent IO by turning off complex derived datatype.
Solution:
Platforms tested:
linux 2.4, AIX 5.1, Linux 2.4 IA64 and IRIX 6.5
Misc. update:
Updating phase 2 work of collective IO
Description:
When the size is bigger than some value for MPI derived data type, mpich 1.2.5 and lower
version won't work any more, so in the configuration file, we will check the version number
and switch from collective IO to independent IO by turning off complex derived datatype.
Solution:
Platforms tested:
linux 2.4, AIX 5.1, Linux 2.4 IA64 and IRIX 6.5
Misc. update:
Description: -xopnemp=stabs linking flag is needed on Solaris 2.9
in order to build Fortran library.
Solution: Added the flag to LDFLAGS if system version is 5.9
I don't really like the fix since this flag is now always added
for 5.9 systems even if Fortran is not enabled. If someone has
a better solution, please let me know :-)
Platforms tested: shanti, sol
Misc. update:
Description: Removed -DH5_ABSOFT flag for C compiler when Absoft f95 compiler
was used; this flag is not needed anymore since we automatically construct
names of C functions called from Fortran.
Solution:
Platforms tested: pommier
Misc. update:
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
Adding supports for cygwin
Description:
g95 needs special fortran flags to make it work cygwin.
Solution:
Add the flag on cygwin config file.
Now gcc, g++ and g95 are supported on cygwin.
Platforms tested:
cygwinNT_5.1, Linux 2.4
Misc. update:
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
improvement.
Description:
hdf5_mpi_complex_derived_datatype_works is hardset to no but
newer IRIX64 systems have it working. Changed the code to
detect the compiler version and set hdf5_mpi_complex_derived_datatype_works
to no for older compilers only.
Platforms tested:
modi4 for the no effect.
Misc. update:
