mirror of
https://github.com/HDFGroup/hdf5.git
synced 2024-12-09 07:32:32 +08:00
bda52fdd68
8 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Frank Baker
|
25733372e4 |
[svn-r11614]
Description:
Correct typo in copyright notice.
Platforms tested:
Ran hdf5/bin/chkcopyright without errors.
|
||
|
Frank Baker
|
155d762b9c |
[svn-r11592]
Description:
Add source code copyright notice; comment symbols vary by type of file.
Platforms tested:
No changes that should cause any problems. Nonetheless, the tree will
be checked out fresh and tests run immediately post-commit.
|
||
Robb Matzke
|
cbf68fc824 |
[svn-r1568] Changes since 19990730
---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments. |
||
Albert Cheng
|
ebb0060a05 | [svn-r1122] Fixed a typo. DEBUG_FLAGS should be DEBUG_CFLAGS. | ||
|
Robb Matzke
|
071aa057aa |
[svn-r907] Changes since 19981111
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
|
||
|
Robb Matzke
|
2ab2e14bb5 |
[svn-r635] Changes since 19980831
---------------------- ./Makefile.in Running `make distclean' will not fail if one of the subdirectories has already been cleaned. ./config/BlankForm ./config/irix5.3 Cleaned it up more. Added better support/documentation for systems that have more than one compiler. ./config/alpha-dec-osf4.0 [NEW] Added a new config file as a result of testing on Jim Reus's machine. ./test/chunk.c Scaled down the testing range so we can actually run it interactively. ./tools/h5import.c Included <unistd.h> to get rid of warning for close(). ./src/H5detect.c Seg-faults on Linux for some reason when NDEBUG is defined, so I just undef it at the top of the source. ./test/big.c Added a fflush(). ./tools/h5ls.c The `-d' flag now works even when `-v' isn't specified. ./examples/h5_chunk_read.c ./examples/h5_compound.c ./examples/h5_extend_write.c ./examples/h5_group.c ./examples/h5_read.c ./examples/h5_write.c Indented according to hdf5 standards. Fixed compiler warnings |
||
|
Robb Matzke
|
4dcf59ae44 |
[svn-r376] ./acconfig.h
./configure.in
./config/BlankForm
./src/H5.c
Configure tries to figure out how to print `long long' types
and then defines PRINTF_LL_WIDTH to be `ll' or `q' or
something. It does this by running little sprintf() programs
with various formats until it gets one that works. If this
causes problems when cross compiling (like with parallel
machines) then you may add the following to the appropriate
config file:
hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} or
hdf5_cv_printf_ll=${hdf5_cv_printf_ll='q'} or
hdf5_cv_printf_ll=${hdf5_cv_printf_ll='l'}
./config/intel-osf1
./config/irix5.3
Updated these config files to match the others. This allows
the `--enable-production' configure flag to work properly.
|
||
|
Robb Matzke
|
a780cdd178 |
[svn-r335] Changes since 19980330
----------------------
./MANIFEST
./src/Makefile.in
./test/Makefile.in
Added new files.
./config/linux
./src/H5HL.c
./src/H5HLprivate.h
./src/H5MF.c
./src/H5MFprivate.h
Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list.
./html/H5.format.html
Updated shared object message information.
./src/H5D.c
Datasets can now share data types.
./src/H5F.c
Updated a comment that referred to H5ACC_WRITE.
./src/H5HG.c
./src/H5HGprivate.h
Moved a few things around. Made debugging better so you can
now give a collection address to ./src/debug and it shows some
useful stuff.
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c [NEW]
./src/H5Ostab.c
Supports shared messages.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
The H5Tshare() function allows the user to give the library
hints about how a data type will be used.
./test/shtype.c
Tests the H5Tshare() function.
./test/gheap.c
Tests the global heap.
./configure.in
./config/BlankForm [NEW]
./config/alpha-dec
./config/freebsd2.2.1
./config/hpux10.20
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
Cleaned up lots of configuration stuff and made the site
configuration files lots easier and more uniform. To make a
new file grab the BlankForm and modify it.
By default, debugging is turned on for most packages. Within
a package one can use `#ifdef H5AC_DEBUG' to wrap debugging
code. Other options are:
--enable-debug
--enable-debug=yes
The default, most but not all packages.
--disable-debug
--enable-debug=no
--enable-debug=none
The symbol NDEBUG is defined and none of the package
debug symbols.
--enable-debug=all
Debugging is turned on for all packages. This might
produce lots of output.
--enable-debug=g,d
Debugging is turned on for H5G and H5D.
A compile mode is also now supported
--enable-production
--enable-production=yes
The library is compiled with optimizations turned on.
The compiler flags are augmented by adding PROD_CFLAGS
and PROD_CPPFLAGS which are defined in the site config
file.
--disable-production
--enable-production=no
The default. The library is compiled for development
by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in
the site config file. This is usually just `-g'.
--enable-production=profile
--enable-production=pg
Builds a library for profiling by including the flags
from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the
site config file. This is usullay just `-pg' but it
could include optimization flags as well depending on
the type of profile one wants.
In summary, configure by saying `./configure' and you'll get a
development version of the library. Configure by saying
`./configure --enable-production --disable-debug' and you'll
get a production version with no debugging code.
|