Bug fix - bugzilla #552
Description:
On Cray X1, trying to use : as an argument confused the system.
Solution:
Added a test in configure to see if : as an argument is bad.
If so, skipped the test.
Platforms tested:
mir, Cray X1 (change to configure only)
Bug fix.
Description:
The ${TR}, though avoid the error, is inconvenient. It is needed
because configure.in use the char range in the style of 'a-z'.
The other style of '[a-z]' is more commonly accepted by all tr
but autoconf tends to strip away [], making the syntax rather
clumsy.
Solution:
Learned from autoconf that it avoids the use of character range
by just spell all the letters out. Changed our tr commands to
use those variables defined by autoconf. Also removed the
definition of ${TR} since it will cause inconsistancy when
autoconf also use plain 'tr' in its generated code.
The Makefile.in are changed because the elimination of ${TR} from
configure triggered its removal from all Makefil.in. That is okay
because ${TR} is not used at all in Makefile.
Platforms tested:
h5committested. (sol failed to connected). also tested in shanti
using both /usr/ucb/tr and /bin/tr (the bad one before.)
Misc. update:
Updated both INSTALL and RELEASE files.
Several bug fixes
Description:
Added config file for Cray X1 (previous file was misnamed)
Simplified some code in hyperslab.c test that seemed to have been
confusing compiler on Cray X1.
Fixed typo in config/commence.am
Cleaned up hl/src/Makefile.am
Solution:
All four fixes should be straightforward. The failure on Cray was
very difficult to debug, but involved arithmetic errors.
This change seems to fix it.
Platforms tested:
heping, copper, sol, some Cray X1 (more testing when system comes back up)
new feature
Description:
1) separated the HL library into "public" and "private" header files, with the same caracteristics as the basic library
2) added the public headers to hdf5.h (with a conditional include macro, defined in configure.in)
3) added the path to HL in all Makefile.am 's , because of the inclusion in hdf5.h
Solution:
Platforms tested:
linux 32, 64
AIX
solaris
with fortran and c++
(one packet table example fails)
Misc. update:
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
Moved gif2h5 tool to hl directory
Description:
Added a tools directory under the hl directory and moved the gif2h5 tool
to that directory.
Solution:
The gif2h5 tool was originally built in the tools directory, but this
introduced dependency issues that required special checks in the
Makefiles.am and required the top-level build order to be changed
because it depended on the HL library.
For simplicity in the Makefiles now and in the future, the gif2h5 tool
was moved to be underneath the hl library.
Platforms tested:
mir, copper, modi4, shanti
bug fix
Description:
the linking order in Makefile.am of the gif2h5 tool was causing linking errors on some configurations (pgcc, --disable-shared)
Solution:
changed the order of the linking (hl before hdf5)
Platforms tested:
linux, several configurations
solaris
Misc. update:
bug fix
Description:
the build order of the several folders was causing linking errors
Solution:
changed the "." to be the last to avoid it
Platforms tested:
linux
Misc. update:
bug fix , bugzilla bug #1
Description:
the gif2h5 was not writing HDF5 images correctly
Solution:
use the Image API to write the image, rewrote the writing functionY
Platforms tested:
linux
solaris
Misc. update:
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Before this checkin, 'gmake check-s' would fail if there was a file in
the current directory named 'check-s'.
This is fixed under gmake (not sure how to fix for other makes).
Solution:
check, progs, install, etc. are what gmake calls "phony" targets,
which means that no file should be created. These targets can be
specified by a line of the form
.PHONY: check progs install ...
Automake adds this line for targets it knows about, but HDF5 has a
lot of custom rules. This checkin adds a .PHONY line for those rules.
I believe that only gmake recognizes the .PHONY line (at least, pmake
doesn't seem to), but a partial solution is better than none.
This error should occur very rarely anyway (the user has to manually
create files with names like 'build-check-s' or '_test').
Platforms tested:
mir, sleipnir, modi4
Bug fix/feature
Description:
Added support for -shlib in h5fc and h5c++.
Made check-install use -shlib when only shared libraries have been installed.
Solution:
h5fc and h5c++ didn't recognize -shlib. Stole code from h5cc to link against
shared libraries.
When static libraries are disabled, the examples Makefiles will automatically
use the -shlib option to link against shared libraries. Thus,
--disable-static and make check-install should work together.
Platforms tested:
heping(disable-static, enable-static, fortran, c++), modi4 (disable-static, fortran, c++, parallel, enable-static)
Bug fix
Description:
Changed configure.in to use an environment variable TR to set the path
to the tr utility.
Solution:
There are two kind of tr on Solaris with slightly different syntax.
HDF5's configure relies on the "standard" tr. Traditionally, HDF5ers
have needed to make sure that the "right" tr was found before the
wrong one in their path; now they can use an environment variable.
Platforms tested:
mir, shanti, sol
Misc. update:
Forgot to update release notes. Off to do that now.
Makefile bug fix
Description:
Previously, automake didn't output rules to build perform/mpi-perf or
the test/gen_* programs.
Now these can be built by typing 'make mpi-perf' (or 'make foo') or by
configuring with --enable-build-all.
Solution:
Automake doesn't like having rules for programs it doesn't build. Tricked
it by having these programs built "sometimes"--whenever the user enables
--build-all. This should be used mostly for testing and to ensure that
these helper programs compile.
***IMPORTANT***
These programs do *not* currently compile. When --enable-build-all is used
(not the default), gen_new_fill fails because it uses an old API. This is
an existing "bug" that has simply been exposed by this checkin.
Platforms tested:
sleipnir, modi4, sol
Misc. update:
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Disabled C++ shared libraries for Sun Workshop compiler.
Solution:
This bug only seems to happen when using the -xarch=v9 flag to compile in
64-bit mode, but disabling shared libraries entirely for this compiler is
an easier fix (I don't know how to detect 64 bit mode from the command line).
The framework for disabling shared libraries for other C++ compilers is
in place.
Platforms tested:
sol, mir, sleipnir, modi4
Bug fix/feature
Description:
Disabled shared libraries for a number of Fortran compilers that don't
support them.
This allows other compilers to support shared Fortran libraries.
Solution:
Added a conditional, SHARED_FORTRAN_CONDITIONAL, which is true if
Fortran supports shared libraries. It is set in configure.in.
Platforms tested:
mir, sleipnir, colonelk, heping
Bug fix
Description:
Errors on sol may have been due to "make clean" being run both
manually and by automake. Removed the manual run.
Also cleaned c++/examples/ii_files directory created by some compilers
(e.g., on modi4).
Solution:
This does mean that examples directories will not be cleaned by
'make clean'.
Platforms tested:
sol, mir, heping, modi4
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Purpose:
Bug fix
Description:
Fixed a Makefile bug that would cause make clean to fail on some platforms
when C++ is enabled.
Platforms tested:
sleipnir, mir
Misc. update:
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fix
Description:
Update Makefiles now that docs are no longer in main hdf5 tree.
Solution:
Changed root-level Makefile.am not to recurse into docs tree.
Removed docs Makefiles from configure.in.
Removed config/commence-doc.am, since it is no longer used.
Platforms tested:
mir (change to Makefiles only)
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Bug fix (kind of...)
Description:
When trying to 'make distclean', the Makefiles will attempt to re-run
configure if configure has changed. This is a nice idea, but prevents
the distclean from happening if configure fails (e.g., if the environment
has changed). This happens frequently in the Daily Tests when configure
is altered.
Solution:
It turns out to be easier than I had feared to override the dependency
that is causing configure to be re-run. Now configure will never
be run automatically, even if it is out-of-date.
It would be more complicated to cause it to be re-run in all cases except
distclean, so we'll try just the inelegant fix for now.
Platforms tested:
mir. This change doesn't affect the source, only what is built when.
The real test will be how the Daily Tests handle changes to configure
(like the one I checked in earlier today).
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Feature: make install now installs h5perf
Description:
h5perf is now installed in hdf5/bin during 'make install.'
Same change as in the 1.6 branch.
Platforms tested:
mir
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
Forgot to run reconfigure
Description:
Forgot to run bin/reconfigure after removing my debug output from configure.in.
Shame on me!
Platforms tested:
mir
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Removed GASS configuration and software packages associated with
it. The following software are no longer configurable.
checking for main in -lcrypto... yes
checking for SSL_get_version in -lssl... yes
checking globus_common.h usability... yes
checking globus_common.h presence... yes
checking for globus_common.h... yes
checking for globus_module_activate in -lglobus_common... yes
checking for main in -lglobus_gass_cache... yes
checking for main in -lglobus_gaa... yes
checking for main in -lglobus_gss... yes
checking for main in -lglobus_gss_assist... yes
checking for main in -lglobus_io... yes
checking for main in -lglobus_gass_transfer_assist... yes
checking for main in -lglobus_gass_transfer... yes
checking for globus_gass_open in -lglobus_gass_file... yes
Platforms tested:
h5committested (but copper was down.) tested in modi4 too.
Purpose:
Bug fix
Description:
modi4 dies during build with strange errors.
The root cause of these is a two-year-old hack in HDF5's libtool
script that only takes effect on IRIX.
Solution:
Edited the libtool hack (by editing ltmain.sh) to correct a bug in
the hack.
Also made sure that compiler-specific DEFAULT_LIBS are used
when linking.
Platforms tested:
sleipnir, copper, modi4, sol
Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Purpose:
Bug fix
Description:
Parallel builds were breaking in tools/lib
Solution:
talign didn't realize it depended on libh5tools.la because its
dependencies listed the full path (../../tools/lib/libh5tools.la).
Changed this, and made similar changes in a couple of other
directories.
This checkin should also add the --foreign flag to every Makefile.in
Platforms tested:
sleipnir (minor change)
New feature
Description:
Add basic code for new B-tree implementation. They don't do much yet,
aren't hooked up to anything yet and the format may change, but I'd like to
start getting them into the daily tests.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Bug fix
Description:
Found the permanant fix to automake/CVS dependency problem
Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.
Platforms tested:
heping sleipnir copper
Bug fix
Description:
Configuration files' timestamps were incorrect.
Solution:
Update Makefiles.in. Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.
Platforms tested:
sleipnir
Bug fix
Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.
Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.
Platforms tested:
sleipnir (No changes to Makefile content)
Bug fix
Description:
Different compilers use different flags to include Fortran module files
Solution:
Changed boilerplate to use configure variable rather than hardcoded -M flag.
Platforms tested:
sleipnir, sol, copper
Configuration feature
Description:
HDF5 now uses automake to generate Makefiles
Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh
Platforms tested:
Many
Description: Removed PABLO from the source
Solution:
Platforms tested: arabica with 64-bit, copper with parallel,
heping with GNU C and C++ and PGI fortran (but
I disabled hl, there is some weird problem only
on heping: F9XMODFLAG is not
propagated to the Makefile files
Misc. update:
add hl fortran
Description:
Solution:
Platforms tested:
linux (absfot and pgf90)
solaris (32 and 64 bit)
AIX
note : HP gives a compiling error , to be fixed in the future
Misc. update:
insert high level library into main library
Description:
configure.in has a new entry (--enable-hl, disable-hl) it is on by default
the configure message prints info regarding if hl is enabled or not
the tree is
/hl
/hl/src
/hl/test
Solution:
Platforms tested:
linux
solaris
AIX
Misc. update:
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
Bug fix
Description:
Correct 'make check-install' failure by restoring previous behavior.
Platforms tested:
FreeBSD 4.8 (sleipnir)
should be the same for all platforms, h5committest not needed.
Update
Description:
Revamped the configuration system. The configurations for the Fortran
and C++ libraries are no longer separate from the "main"
configuration system. This involved removing the "configure*" and
"aclocal.m4" files from the fortran/ and c++/ subdirectories. Also
merging settings in the config/ subdirectories into the main config/
subdirectory.
Fortran header files had to be modified a little for Linux. It was
checking if it was a Linux machine by some #defines, however with the
-std=c99 switch, these defines weren't there. I added a check for
some other ones which should be there whether the -std=c99 switch is
used or not.
Platforms tested:
Verbena (Fortran & C++)
Sol (Fortran & C++)
Copper (Fortran & C++)
Modi4 (Parallel, Fortran, & C++)
Misc. update:
Improvement, IMO.
Description:
The parallel tests were run after all tools tests. For some parallel
systems, that could be a long time. Since tools are better tested
in serial mode and one would like to see the results of parallel
tests sooner in parallel mode, I moved the parallel tests before
the tools tests.
Platforms tested:
Only tested in Eirene, both serial and parallel modes.
No need for three platforms test since this is just a simple
Makefile change.
Bug fix and feature
Description:
The patch to Makefile.in failed if an empty directory of fortran/examples
was left behind by a previous build.
Solution:
Attempted to put it in config/conclude.in just became a mess since
it is hard to predict when we will include examples in the subdirs
or not.
Borrow the structure of install-examples and do some handcode per
interface. The Makefile.in of each interface (C, Fortran, C++)
controls everything. Not very systematic but pretty clean for this
case.
Platforms tested:
h5committested.
Also tested in modi4 with various combinations of fortran, c++
enabled.
Misc. update:
Feature
Description:
Added a simple way to run make check in the fortran/examples too.
This would be a good exercise of the installed h5fc command.
(A more systematic way, similar to install-examples, should be
implemented.)
Platforms tested:
h5committested--that only made sure the change did not break anything.
Also tested "make check-install" in modi4 to make sure the changes do
work.
Misc. update:
Feature
Description:
Added the check-install target to verify if installed software is
working. Currently only run "make check" in examples.
Platforms tested:
eirene
Bug Fix
Description:
``make uninstall-doc'' wasn't working properly. Some files would be
left behind in the installed source tree. The fix I put in was too
heavy-handed as it wiped out the entire doc tree that was installed
and would remove any other files which were installed there.
Solution:
Executed the ``make uninstall-examples'' command if uninstalling the
docs. Fixed how the java Tutorial examples were being removed (they
weren't). Essentially used the PUB_SUBDOCS macro to help remove them.
Platforms tested:
Linux
Feature
Description:
Change examples to use the installed h5cc to compile the examples
programs. That will test the correctness of the installed software.
Removed examples from make targets in the top level so that it does
not get invoked in make or make check since one cannot compile
the example programs until after "make install" has completed.
Platforms tested:
eirene and modi4 (parallel)
Purpose:
Feature Add
Description:
Added "install-example" and "install-all" to the Makefile system.
The behaviour of the "make install*" options:
make install - Installs binaries, libraries, include
files, and example programs.
make install-examples - Installs only the example programs.
The directories are:
${prefix}/doc/hdf5/examples/{c,c++,fortran}
make install-all - Install the binaries, libraries, include
files, example programs, and
documentation. The whole kit-n'-caboodle.
make uninstall-examples - Get rid of those example files (but not
the ${prefix}/doc/hdf5/examples/...
directories)
There's a new bin/ program which helps create directories which are
deeply nested called "mkdirs". It's a simple shell script.
Platforms tested:
Linux
Bug fix
Description:
Moved the position of the target of perform so that it is
included in compiling but not in the 'check' target.
Platforms tested:
eirene.
new feature
Description:
Added perform programs to test the HDF5 library performance. Programs
are installed in directory perform/.
Platforms tested:
eirene
Update
Description:
Remove the doc from the SUBDIRS macro since we don't have to go to
that directory for all make options. Add doc to the "cleaning"
actions...
Platforms tested:
Linux
Makefile.in:
acconfig.h:
src/H5F.c:
src/H5FDdpss.c:
src/H5FDdpss.h:
src/H5config.h.in:
test/dpss_read.c:
test/dpss_write.c:
Changed the name DPSS to GRIDSTORAGE since that is the real name
of the API from ANL. DPSS is just one of the protocols it can use.
Changed a bug in the --with-ssl option.
Makefile.in:
Removed the copying of Makefile.dist since it caused problems
when doing a make distclean in a --srcdir configured directory.
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
----------------------
./Makefile.in
Running `make' in the top directory recurses into the examples
directory also except if the make target is one of: lib,
progs, check, test, _test, install, uninstall.
./examples/Makefile.in
Changed programs into tests, which just means that `make
tests' does what `make progs' used to do and that `make check'
runs the executables.
./src/H5Tconv.c
Fixed a typo in the unsigned-to-signed native converter for
large types to small types. This fixes a bug on baldric and
possibly other machines for the `dtypes' test.
Also fixed a signed vs. unsigned warning.
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./src/H5D.c
Fill values are working for contiguous datasets now except
there are two things that need more support from the data
space layer, specifically the ability to form a selection from
the difference of two selections. They are (1) extending an
external contiguous dataset, (2) optimization by delaying the
fill until after the first H5Dwrite().
Renamed H5D_allocate() to H5D_init_storage() since allocation
is only part of the story. Added a data space argument so it
doesn't have to query the space from the object header -- the
space is always available in the caller anyway.
Removed `#ifdef HAVE_PARALLEL' from a few places where it
wasn't necessary. We don't need it around code that doesn't
compile anything from mpi.h or mpio.h.
./src/H5Fistore.c
Uncommented H5F_istore_alloc() for non-parallel and moved the
`#ifdef HAVE_PARALLEL' just around Kim's barrier.
./src/H5Fmpio.c
Wrapped a couple long lines.
Got rid of two signed vs. unsigned comparison warnings.
./MANIFEST
./test/Makefile.in
./test/fillval.c [NEW]
Added tests for fill values. The contiguous dataset extend
test is disabled until H5S_SELECT_DIFF is implemented.
./tools/Makefile.in
Fixed a bug where `make test' didn't build the executables
first. This should cause the snapshots to start up again.
./Makefile.in
Changed to build in `test' directory before `tools'
directory. We want the library tests to pass before we even
start considering the tools. You can still build and/or test
the tools independent of the library tests passing.
----------------------
./Makefile.in
Running `make distclean' will not fail if one of the
subdirectories has already been cleaned.
./config/BlankForm
./config/irix5.3
Cleaned it up more. Added better support/documentation for
systems that have more than one compiler.
./config/alpha-dec-osf4.0 [NEW]
Added a new config file as a result of testing on Jim Reus's
machine.
./test/chunk.c
Scaled down the testing range so we can actually run it
interactively.
./tools/h5import.c
Included <unistd.h> to get rid of warning for close().
./src/H5detect.c
Seg-faults on Linux for some reason when NDEBUG is defined, so
I just undef it at the top of the source.
./test/big.c
Added a fflush().
./tools/h5ls.c
The `-d' flag now works even when `-v' isn't specified.
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
Indented according to hdf5 standards.
Fixed compiler warnings
----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
Documentation (mostly)
Solution:
Parallel HDF5 support on Intel TFLOPS machine using PFS file system
and MPIO.
Platform tested:
Intel TFLOPS (ASCI Red)
----------------------
This checkin completes the compression stuff almost two weeks ahead of
schedule. It should now all be working and documented.
./Makefile.in
./config/commence.in
A distclean causes the distribution makefile to be copied to
Makefile again.
./src/H5D.c
Opening a compressed dataset now works properly.
./src/H5P.c
./src/H5Ppublic.h
The H5Pset_compression() and H5Pget_compression() now work as
documented.
./src/H5T.c
Fixed a bug that causes the library to crash sometimes if
debugging is turned on for the `t' package.
./src/H5Z.c
Fixed a bug where the number of bytes attributed to
compression overruns was too low in the debugging output.
./test/dsets.c
More compression tests: reading of uninitialized data, opening
an existing dataset and reading it, partial I/O which isn't
aligned on chunk boundaries, and use of application-defined
compression methods.
./MANIFEST
Removed ./test/dspace.c.
----------------------
./MANIFEST
./configure.in
./configure
./Makefile.in
./bin/distdep [NEW]
./config/conclude.in
./config/depend.in
./src/.distdep [NEW]
./test/.distdep [NEW]
Added some code so non-GNU systems have a list of dependencies
between the .c files and the .h files. Hopefully this works
and y'all don't have to keep saying `make clean' each time you
change a header.
On systems with GNU make, GCC, and Perl, the dependency
information is generated automatically from rules in
config/depend.in as has always been done. But now extra files
called `.distdep' (for `distributable dependencies) are left
in each directory and these are part of CVS and thus
releases. (A `make dep' will create dependencies on demand
without doing anything else.)
On systems lacking one or more of the tools above, the various
`.distdep' files are inserted into the end of the Makefiles.
If you do developement on one of these systems you'll have to
update the `.distdep' and/or Makefile by hand, or wait until
you have access to a GNU system and do a `make dep'.
New feature
Problem:
"make H5Tinit.c" from toplevel not supported.
Solution:
added in the lines
H5Tinit.c:
(cd src && $(MAKE) $@)
This and other changes already committed allow the sequential HDF5
library to be compiled and tested for the ASCI Red machine in the
following steps:
sasn100: configure -v tflop
janus: make H5Tinit.c #made possible by this check-in
sasn100: make >&! comp.out
janus: make _test >&! test.out
The name: indicates which machine the command line must be run from.
Platform tested:
ASCI Red machine: janus
----------------------
./INSTALL
./Makefile.dist
./Makefile.in
./config/conclude.in
Some stupid make's don't know what PHONY means. I added
changed config to _config in the default makefile and added
_test to the other makefiles.
./src/H5Psim.c
A `file_offset' argument got changed to `int' accidently that
causes tests to fail on 64-bit machines. I changed it back to
size_t.
./src/H5T.c
Changed a couple printf formats.
----------------------
./Makefile.in
./config/commence.in
With GNU make you can now use `-j' and `-l' options and things
get built correctly. I can do a `make -j -l6 test' from a
clean hdf5 source tree (after configure) in 45 seconds (8 to
build dependencies, 26 to compile everything, and 11 to run
the tests).
./src/H5Gnode.c
Removed a comment that no longer applies.
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
Changed H5Pselect_hyperslab() to H5Pset_hyperslab() and added
H5Pget_hyperslab() and H5P_get_hyperslab().
Replaced a couple short memset() calls with a for loop.
Removed `if (foo!=NULL)' from around H5MM_xfree() calls.
Clear hslab_def when the hyperslab disappears.
./src/H5Tpublic.h
Removed trailing enum comma.
