----------------------
./MANIFEST
Added tcompound2.{dmp,h5} and tdset2.{dmp,h5} used by the
h5toh4 testing.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added check for <sys/timeb.h> for Win32.
Determines sizeof(char) just so we have a complete list of
type sizes defined as preprocessor symbols.
./src/H5detect.c
./src/H5T.c
./src/H5Tpkg.h
Detects alignment constraints. In order for this to work the
operating system must not correct unaligned data (for
instance, on the DEC Alpha one might need to say `uac p
sigbus' before running H5detect).
./src/H5private.h
Includes <signal.h> because it's needed by H5detect.c to
detect alignment constraints.
./src/H5Tconv.c
Added extra checks to all hardware conversion functions so
they align data when necessary before the conversion. This
slows down the conversions somewhat but they're still much
faster than the software conversions.
./test/dtypes.c
By setting a constant at the top of the source you can test
conversions where the data is aligned on various byte
boundaries.
By setting a constant at the top of the source you can
simulate architectures that have alignment constraints on
architectures that don't.
Changed typo SIZEOF_LDOUBLE to SIZEOF_LONG_DOUBLE in a few
places.
----------------------
./src/H5Tconv.c
With my poor eyesight I missed the definitions of SCHAR_MIN
and SCHAR_MAX in <limits.h> and used CHAR_MIN and CHAR_MAX
incorrectly. I changed all occurrences of the latter to the
former and the new hardware integer type conversions now work
on Irix.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5.c
./test/h5test.c
Added a wrapper for HDsnprintf() that just calls sprintf() if
snprintf() isn't available.
./MANIFEST
Added Paul's new h5toh4 files.
----------------------
./INSTALL.parallel [NEW]
We're beginning to unify some of the parallel installation
steps. This file will contain general information for
installing the parallel library. It's not complete yet.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Check for xdr_int() in libnsl required on Solaris when linking
with hdf4. It's found on the Irix system I tested which
complains that `-lnsl' didn't resolve any symbols. Oh well.
Fixed the order of searching for libdf and libmfhdf for hdf4
linking.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5Z.c
Check for compress() in libz in order to find older versions
of the library that will still work for hdf4. Added a
separate check for compress2() that hdf5 will use.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Sselect.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./test/bittests.c
./test/gheap.c
./test/hyperslab.c
./test/istore.c
./test/tmeta.c
./test/trefer.c
./test/tselect.c
./tools/h5debug.c
./tools/h5tols.c
Added checks for Posix.1g types like `int8_t'. If not defined
then H5private.h defines them. Changed all `int8' etc. to
`int8_t'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Z.c
Calling H5*_term_interface() resets interface_initialize_g to
FALSE so a subsequent call to H5open() (implied or explicit)
reinitializes global variables properly.
./src/H5private.h
./src/H5Oefl.c
./src/H5S.c
Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to
SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they
match the Posix.1 constants in <limits.h>.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5detect.c
Added 36 more integer hardware conversion functions to the
type conversion table for conversions to/from `long long' and
`unsigned long long'. The `long long' names will be changed
shortly to make them portable to Win32.
Changed H5T_init() to H5T_native_open() and added an
H5T_native_close() to open and close the predefined native
data types.
Increased the initial size of the type conversion table from
64 to 128 entries.
Reordered the 90 new integer conversion functions so the names
that are printed favor `int' over `short' or `long' when two
of them are the same.
./test/dtypes.c
Added hardware and software integer conversion tests for the
56 functions I added recently but not the additional 36
checked in this time. That will come next.
Call H5close() after each test so type conversion statistics
are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes
Added more debugging output for when things go wrong.
./src/H5private.h
Removed trailing carriage-returns inserted by broken operating
system ;-)
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
./configure.in
./acconfig.h
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added checks for functions, structs, constants, and header
files used in h5ls.c to determine the output width with
various Windows compilers and Unix variants.
Added check for <sys/stat.h> and defined
HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside
the Posix.1 #include's section.
./src/H5RA.c
Less aggressive about failing -- rather returns false, which
allows type detection to continue.
./src/h5ls.c
Data types are displayed for datasets and named data types when
`-v' or `--verbose' is specified on the command-line. The
algorithm is a little different than the dumper because we're
trying to be human-friendly, not necessarily machine-friendly.
* Any data type which matches a native C type gets printed
something like `native double'.
* A floating point type that matches one of the IEEE standard
types but not one of the native types gets printed like `IEEE
64-bit big-endian float'.
* Other floating point values have information about sign bit
location; exponent size, location, and bias; and significand
size, location, and normalization.
* Padding and offsets are displayed for types that have
padding (precision != size), including internal padding for
some floating point data types.
* Non-native integer types are displayed like `32-bit
little-endian unsigned integer'.
* Compound data types have each member displayed including the
member name, byte offset within the struct, dimensions, index
permutation, and data type.
* String types are displayed like `256-byte null-terminated
ASCII string'.
* References are displayed like `8-byte unknown reference'
until the reference interface stabilizes a little.
* All other types including types not yet defined will be
printed like `4-byte class-9 unknown'.
The dimensionality of scalar datasets is printed like `{SCALAR}'
instead of just `{}'.
If external raw files are used to store a dataset then the offsets,
sizes, and file names of each are printed if `-v' or `--verbose'
was given on the command-line.
If an object is found and h5ls can't determine the object type then
it still tries to print the number of hard links, the OID, and any
comment that might be present if `-v' or `--verbose' was specified.
If the `-d' or `--dump' switch is turned on then ragged arrays will
report that the data can only be dumped by dumping the component
datasets explicitly. I'm not planning to implement this since
we're going to eventually change the whole way ragged arrays are
stored.
Compound data values do not have the component names displayed by
default when `-v' or `--verbose' is turned on. Instead, the names
can be displayed with `-l' or `--label'.
The output width is determined by the first rule that applies:
* If the `-wN', `-w N' or `--width=N' switch appeared on
the command line then use N for the output width.
* Query the OS for the tty width in a highly unportable way
borrowed from GNU `less' depending on what functions and
data structures were found during configuration (if any):
_getvideoconfig(), gettextinfo(), _srcsize(), ioctl(),
GetConsoleScreenBufferInfo(), struct videoconfig, struct
text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl.
* If the `COLUMNS' environment variable is set then use
its value.
* Use the value 80.
Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv
test.vbt'. You can also try it on the various *.h5 files in the
test/example directories.
./config/linux
Removed turning on parallel by default on Robb's macine.
----------------------
./bin/snapshot
Made same fix as for the release script yesterday.
./src/H5D.c
./src/H5Dprivate.h
./src/H5G.c
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5O.c
./src/H5Oprivate.h
./src/H5RA.c
./src/H5RAprivate.h
./src/H5T.c
./src/H5Tprivate.h
Improved object type checking. Instead of determining the
object type by trying to open each of the possible types, we
keep a table of associations between object type number (like
H5G_GROUP, H5G_DATASET, H5D_TYPE, and H5D_RAGGED) and an `isa'
function that returns true if the object header has the right
messages to make the object a particular type. This mechanism
also allows specialization of object types by permitting an
object to satisfy more than one `isa' function.
Added `isa' functions for groups, datasets, ragged arrays, and
committed data types.
./src/H5config.h.in
Added HAVE_STAT_ST_BLOCKS. I thought this had already been
added, but apparently not.
./tools/h5ls.c
Removed system include files since they're already included by
H5private.h and since I wasn't including them portably anyway.
By default, 1-byte integer types are printed as integer values
instead of ASCII characters. However, the `-s' or `--string'
command-line switch causes the data to be interpretted as
ASCII. String data types are always printed as character
data.
Ragged arrays are now identified as ragged arrays and h5ls
doesn't descend into the group automatically. This uses the
new object type specialization stuff.
./tools/h5tools.c
./tools/h5tools.h
Added the ability to print 1-byte integer types as either
ASCII or numeric data instead of always ASCII. The default is
to print as numeric data.
----------------------
./MANIFEST
Added new Pablo files HDF5record_RT.h and ProcIDs.h
./acconfig.h
./configure [REGENERATED]
./configure.in
./src/H5.c
./src/H5Vprivate.h
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5public.h
./test/big.c
Added more configuration stuff for the Win32 environment. Removed all
the #ifdef WIN32 from the source and replaced them with OS-independent
stuff. Specifics follow:
Check for non-Posix.1 `st_blocks' field in `struct stat' which is used
by the big file test to decide if the file system supports holes. If
the st_blocks field isn't present then we just skip the test.
Configure checks for <io.h> <sys/resource.h> <sys/time.h> and
<winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H,
HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found.
Configure checks whether both <sys/time.h> and <time.h> can be
included and defines SYS_TIME_WITH_TIME if so. Otherwise include only
<sys/time.h> or <time.h> even if both exist.
Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the
result or to zero if __int64 isn't defined. The source uses `long
long' in preference to `__int64'.
Removed null WIN32 definition for `inline' since such a definition
already exists in H5config.h
Protected gettimeofday() calls in debugging code with
HAVE_GETTIMEOFDAY instead of WIN32.
./src/H5F.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.h
./src/H5P.c
./src/H5Tconv.c
./src/H5private.h
Removed #include of system files from library source files and
consolodated them into H5private.h where they're protected by various
configuration macros (most of them were duplicated there already
anyway).
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/overhead.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Protected system #include's with #ifdef's from H5config.h.
Undefined NDEBUG since some of the tests rely on assert() to check
return values.
Removed WIN32 definitions for __unused__ since this can be controlled
by the definition of HAVE_ATTRIBUTE in H5config.h
./test/testhdf5.h
Removed the CLEAN_CMD definition because we no longer use it.
Albert's cleanup() functions replaced it.
./test/fillval.c
Initialized auto hid_t variables to fix warnings in error recovery
code when data flow analysis is turned on in compilers.
./test/h5tools.c
Initialized an auto variable to fix a compiler warning.
./test/chunk.c
./test/ragged.c
The WIN32 had some unsigned variables changed to signed because the
compiler generates warnings when coercing unsigned to double(?). I
changed them back to unsigned because they really are unsigned
quantities. If this the change was just to shut up extraneous warnings
then perhaps a compiler flag can do the same; otherwise if the
compiler generates bad code then we should supply a patch file instead
messing up source code with bug work-arounds.
./src/H5detect.c
Protected system #include's with #ifdef's from H5config.h thereby
removing a WIN32.
If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that
`struct passwd' doesn't exist either (we don't really need it in that
case).
The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of
`long long' or else `__int64' or else `long' depending on what's
available.
./src/H5Flow.c
./src/H5Ofill.c
Added __unused__ to some function arguments that aren't used when
assertions are turned off.
./src/H5V.c
Changed an auto variable name in some hand-inlined code to get rid of
a warning about the variable shadowing a previous auto.
----------------------
./MANIFEST
./bin/release
./bin/snapshot
The format of the MANIFEST file has been relaxed -- comments
and blank lines should no longer confuse the tools that use
it.
As before, this file should contain a list of *all* files that
are part of HDF5, which means all files which are managed by
CVS/SVF. However, files can be marked so they're not part of
a release by adding _DO_NOT_DISTRIBUTE_ after the file name.
I've removed all the *.obj files from the distribution by
adding _DO_NOT_DISTRIBUTE_ after their names. I also removed
the old white-papers that might not apply to the current
version of the library and documentation about chunking
performance since it's wrong now that chunk caching is
implemented. Everyone please check the files you're
responsible for to make sure that they should really be part
of a release.
To get a list of all files use
grep '^\.' MANIFEST | cut -f1
To get a list of files for distribution use:
grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_
(These commands assume tabs in the MANIFEST file. If the file
might contain spaces then run it through `unexpand' or `tr'
first).
./configure.in
./configure
./test/ragged.c
Check for sigaction().
./test/Makefile.in
The `clean' target removes the timing tests.
----------------------
./bin/release
Added ./Makefile to the distribution again -- it got lost in
the changes last week although it isn't all that important a
file since it gets clobbered by configure anyway.
./bin/trace
./doc/html/Filters.html
./doc/html/H5.format.html
./doc/html/H5.user.html
./src/H5.c
./src/H5D.c
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5O.c
./src/H5Ocomp.c
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c
./src/H5Zprivate.h
./src/H5Zpublic.h
./src/hdf5.h
./test/dsets.c
./tools/h5ls.c
Added the data filter pipeline, a generalization of the
compression stuff which allows things like checksums,
encryption, compression, performance monitoring, etc. See
./doc/html/Filters.html for details -- it replaces the
Compression.html doc.
./src/H5T.c
Cleaned up debugging output.
./config/linux
Added checks for egcs and pgcc and changed optimization flags
for the compilers.
./src/H5G.c
./tools/h5dump.c
Fixed compiler warnings in these files and others.
./configure.in
./src/H5private.h
./test/mtime.c
Added a check for difftime() and defined HDdifftime() to do
something else on systems that don't have difftime().
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5O.c
./src/H5Oprivate.h
./src/H5Omtime.c [NEW]
./src/H5private.h
./src/Makefile.in
Added the modification time message. If an object header has
this message then it's value is updated with the current time
whenever anything changes in the object header.
./acconfig.h
./configure.in
Alas, there seems to be no standard way to convert a string
time like 19980727122800 in UTC to a time_t since mktime()
only converts local times to time_t. So I've modified the
configuration to check for various ways of getting the time
zone information:
* Added checks for the `tm_gmtoff' field of `struct tm'.
* Added a check for the `timezone' global variable.
* Added a check for `struct timezone'.
* Added a check for BSDgettimeofday().
* Added a check for gettimeofday() although it doesn't
actually set the timezone argument on some systems.
* Added a check to see if `tm_zone' is a member of `struct tm'.
* Added a check to see if `tzname' is a global variable.
* Added a check to see if `struct tm' is defined in time.h
or sys/time.h.
It's not difficult to get the right UTC modification message
into the object header, but some systems might have problems
getting the right time back out (Irix64 is one) and those
systems will report zero for the H5G_stat_t.mtime from an
H5Gstat() call as if the mtime message isn't even present. It
will, however, continue to be updated as normal.
./src/H5G.c
./src/H5Gpublic.h
The H5G_stat_t struct now contains an `mtime' field which will
hold the object modification time. If the object has no
object modification time then the `mtime' will be initialized
to zero.
Fixed a bug in H5G_stat() that caused the `objno' field of the
H5G_stat_t to be set incorrectly on some machines.
./src/H5D.c
Writing to external datasets fail if the hdf5 file is not open
for writing.
A modification time message is added to the dataset object
header when it's created and H5O_touch() is called from
H5D_write() to update that message.
./src/H5T.c
Fixed a bug in H5Tget_member_dims() that caused a segmentation
fault if one of the output array arguments was the null
pointer.
Relaxed the member dimension checking in H5Tinsert_array() so
it can also be used for scalar members.
./test/Makefile.in
Added additional file names to the `mostlyclean' target.
./tools/h5dump.c
./tools/h5tools.h
Increased the temporary buffer size to 1MB.
Added support for printing compound data types with array
members.
When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape
double quote characters.
./tools/h5ls.c
Changed the output format a little because we were starting to
get too much info to fit on a line. Without `--verbose' each
object occupies one line of output. Otherwise, additional
information is printed below the object name: object file
address, comment, and modification time. If `--dump' is given
then the data is printed after the other information.
./test/cmpd_dset.c
Changed the way the dataset is initialized to be more uniform.
----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
----------------------
./MANIFEST
Alphabetized. `d' comes before `e' :-)
./bin/release
Added the `-batch' option which causes the script to not ask
questions and to automatically update the minor version
number and set the patch level back to `a'. This is intended
to be used for the daily snapshots:
#! /bin/sh
set -e
cd ~/hdf5
make distclean
make test
bin/release -batch tar compress gzip bzip2
mv ./releases/* /repository
./src/H5Z.c
Removed warnings about unused variables when the zlib.h header
file is present but libz.a isn't.
./INSTALL
./configure.in
./doc/html/tracing.html
Made API tracing the default (you still need to define the
HDF5_TRACE environment variable to get results) and change the
name from `--disable-tracing' to `--disable-trace' to make it
consistent with the other switches.
Changed `site config file' to `host config file' to match the
documentation.
./doc/html/H5.user.html
Added a reference to the `tracing.html' file.
----------------------
./MANIFEST
./configure.in
./examples/Makefile.in [NEW]
Added a Makefile.in for the examples directory. To generate
the Makefile run configure again.
----------------------
./html/tracing.html NEW
This entire update is to make it possible for the library to
print the name, arguments, and return value of every API call
without requiring any extra work from developers or app
programmers. This file describes how this all works.
./configure.in
Added the `--enable-tracing' switch. If you use it then the
library will include code to print API function names,
argument names and values, and function return values.
However, you must then turn on the tracing by setting the
HDF5_TRACE environment variable to a file descriptor number.
The default is `--disable-tracing' since enabling it causes a
slight increase in library size and a slowdown resulting from
an extra function call for each API function call (I couldn't
even measure the slowdown :-)
./bin/trace NEW
A perl script that synchronizes the H5TRACE() macro calls in
the *.c files with the function return type and formal
argument names and types. If you use GNU make and gcc then
this will be done automatically, otherwise just invoke this
script with the names of one or more .c files. You could do
it by hand to, but encoding argument types is a little tricky
at first.
./config/commence.in
Added the $(TRACE) macro, which defaults to the no-op.
Added -D_POSIX_SOURCE to the compiler command line.
./src/Makefile.in
Override the default for $(TRACE).
./config/depend.in
Automatically calls $(TRACE) to synchronize the H5TRACE()
macros in any source file that changed. As with makefile
dependencies, one way to force synchronization of all files is
to remove the `.depend' file.
./MANIFEST
Added new files.
./src/H5Eprivate.h
Modified HRETURN_ERROR() and HRETURN() for tracing.
./src/H5.c
./src/H5private.h
This is where the real tracing work really happens, in
H5_trace().
./src/H5A.c
./src/H5D.c
./src/H5G.c
./src/H5P.c
./src/H5S.c
./src/H5Z.c
Added H5TRACE() calls to all API functions. You don't really
need these changes if you don't want to merge your stuff
because they can be generated automatically by going to the
hdf5/src directory and saying ../bin/trace *.c
./src/H5T.c
Added H5TRACE() calls. Other stuff below.
./src/H5E.c
./src/H5Epublic.h
Added H5TRACE() calls. Created a type H5E_auto_t for the
`func' argument of H5Eset_auto() and H5Eget_auto() to make
those arguments easier to parse for tracing. It should also
make it clearer for users that don't know how to read
complicated ANSI data types.
./src/H5F.c
Added H5TRACE() calls. Changed a couple `uintn' argument
types in API functions to `unsigned int' since `uintn' part of
the API. Changed a few "can't" and "cant" error messages to
"unable to".
./src/H5Ipublic.h
Removed H5_DIRECTORY from the H5I_group_t enum. It wasn't
used anywhere.
./src/H5Tconv.c
Removed an unused label.
./src/H5Fistore.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5T.c
./test/dsets.c
./test/dtypes.c
Fixed a warning about a variable possibly used before it's
initialized. Added __unused__ to turn off some unused
argument warnings that pop up when debugging is turned off and
optimizations are turned on.
----------------------
./src/H5Tbit.c
./MANIFEST
./test/Makefile.in
./test/bittests.c NEW
Finished the bit vector operations and added test cases.
./src/H5Tconv.c
./test/dtypes.c
Finished integer->integer general conversion and added test
cases. Overflows and underflows are handled by substituting
the closest possible value. Examples:
(unsigned)0xffff -> (unsigned) 0xff
( signed)0xffff -> (unsigned)0x0000
(unsigned)0xffff -> ( signed)0x7fff
( signed)0x7fff -> ( signed) 0x7f
( signed)0xbfff -> ( signed) 0xbf
( signed)0x8000 -> ( signed) 0x80
./src/H5private.h
Added definitions for MIN and MAX that take 3 or 4 arguments:
MIN3(), MIN4(), MAX3(), MAX4(). Also added MIN2() and MAX2()
as aliases for MIN() and MAX().
./test/tattr.c
Removed some redundant `&' operators.
./configure.in
./src/H5config.h.in [regenerated]
./src/H5.c
Fixed warnings on DEC where long double is the same as
double.
----------------------
THIS CHECKIN IS FOR QUINCEY -- NOT EVERYTHING WORKS (but it compiles)
MOST OF THE CHANGES ARE FOR BETTER TYPE CONVERSION IN THE NEXT ALPHA
./MANIFEST
./src/H5Tbit.c NEW
./src/Makefile.in
Bit vector operations (not done yet)
./configure.in
Added -lm to the library list, needed by bit-vector operations
and conversion functions.
Removed vestiges of PARALLEL_SRC no longer used by the
makefiles. Albert came up with a better way (that actually
works :-)
./src/H5D.c
No code changes. Split a couple of long lines, refilled a
couple multi-line comments.
./src/H5T.c
./src/H5Tpublic.h
Fixed a bug reported by Jim Reus regarding conversion of
compound data types whose members require conversions which
are satisfied by as-yet unregistered soft conversion
functions.
Added H5T_IEEE architecture, but the funny-looking integer
types will be changed to H5T_BE_ and H5T_LE_ architectures
with the type names changed to match the H5T_NATIVE_ integers.
Added an H5Tconvert() but it hasn't been documented or tested
yet.
./src/H5Tconv.c
./src/H5Tpkg.h
Registered conversion functions integer->integer (a general
case) and integer->float (for a specific case). The
integer->integer conversion depends on the bitvector
operations which aren't finished yet and the int->float
conversion hasn't been retested since it was borrowed from
AIO. Don't look at them yet, they're ugly :-)
./src/H5detect.c
Fixed a typo which caused the msb_pad field of an atomic type
to not be initialized.
./test/dtypes.c
Added a test for number conversions but it's commented out
until the conversion stuff is truly working.
./configure.in
./config/BlankForm
./src/H5.c
Configure tries to figure out how to print `long long' types
and then defines PRINTF_LL_WIDTH to be `ll' or `q' or
something. It does this by running little sprintf() programs
with various formats until it gets one that works. If this
causes problems when cross compiling (like with parallel
machines) then you may add the following to the appropriate
config file:
hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} or
hdf5_cv_printf_ll=${hdf5_cv_printf_ll='q'} or
hdf5_cv_printf_ll=${hdf5_cv_printf_ll='l'}
./config/intel-osf1
./config/irix5.3
Updated these config files to match the others. This allows
the `--enable-production' configure flag to work properly.
----------------------
./html/Compression.html [NEW]
./html/Datasets.html
./html/H5.format.html
./html/H5.user.html
Documented compression. A couple of the H5P functions aren't
quite implemented yet but they're coming soon...
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocomp.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c [NEW]
./src/H5Zprivate.h [NEW]
./src/H5Zpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/dsets.c
./test/istore.c
Compression is now mostly working. Don't try to open a
compressed dataset though because the compression message
won't be read.
./html/Datatypes.html
./html/H5.api.html
./src/H5.c
./src/H5private.h
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added timing support. When compiled with H5T_DEBUG defined
the library will print conversion bandwidths when the library
closes. The H5Tregister functions take a string as the first
argument so the statistics output is meaningful.
./MANIFEST
Added new files.
./configure.in
./src/H5config.h.in
Check for getrusage(). Check for compress2() in libz.a and
the zlib.h header file. Added `z' to the debug list.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
./src/debug.c
Cleaned up some indentation and added support to print istore
B-trees. From the debugger, give the B-tree address and the
dimensionality from the layout message of the object header.
./src/h5ls.c
The oid is printed as w❌y:z where w and x are the file ID
and y and z are the OID within the file. You can give z or
y*2^32+z as an argument to the debugger to print the object
header for the object.
./src/H5AC.c
Cleaned up statistics and made them match those reported by
H5T and H5Z.
./src/H5MM.c
./src/H5MMprivate.h
./src/H5Fistore.c
Finally got rid of a couple of long-standing const cast
warnings.
----------------------
./src/H5Osdspace.c
./html/H5.format.html
In the past we were allowed to have >2GB files on a 32-bit
machine as long as no dataset within the file was larger than
4GB (or whatever sizeof(size_t) is). That's been fixed now.
All dataset size calculations are done with `hsize_t' which is
normally defined as `unsigned long long'.
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
The file family member size can now be set/queried. The
default is still 64MB, but it can be set to 1GB by saying:
H5Pset_family (plist, 30, H5P_DEFAULT);
When opening an existing file family the specified
bits-per-member is ignored and the first member of the family
determines the bits-per-member, which can be retrieved with
H5Pget_family().
./acconfig.h
./configure.in
./src/H5config.h
./src/H5public.h
Added `--disable-hsizet' so that those with old GCC compilers
(<2.8.1) can still compile the code.
./src/H5.c
./src/H5private.h
Added HDfprintf() which works just like fprintf() except you
can give `H' as a size modifier for the integer conversions
and supply an `hsize_t' or `hssize_t' argument without casting
it. For instance:
hsize_t npoints = H5Sget_npoints(space);
HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n",
npoints, npoints);
You can now give `%a' as a format to print an address, but all
formating flags are ignored and it causes the return value of
HDfprintf() to not include the characters in the address (but
who uses the return value anyway :-). Example:
H5G_t *grp;
HDfprintf(stdout, "Group object header at %a\n",
&(grp->ent.header));
Added HDstrtoll() which works exactly like [HD]strtol() except
the result is an int64.
./src/debug.c
Large addresses can now be entered from the command-line. Use
either decimal, octal (leading `0') or hexadecimal (leading
`0x') when giving the address.
./src/h5ls.c
The printf format for dataset dimensions was changed to `%Hu'
to support large datasets.
./test/big.c [NEW]
A test for big datasets on 32-bit machines. This test is not
run by default. Don't try to run it on an nfs-mounted file
system or other file system that doesn't support holes because
it creates two 32GB datasets of all zero.
----------------------
./src/H5B.c
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5S.c
./src/H5Sprivate.h
./src/H5Spublic.h
./src/H5Ssimp.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5private.h
./src/H5public.h
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tfile.c
./test/th5s.c
Anything having to do with the size of a dataset now uses the
types `hsize_t' and `hssize_t' which must be the same size and
at least as large as `size_t'. This isn't fully tested yet,
so hsize_t and hssize_t are defined as size_t and ssize_t in
H5public.h. Setting them to larger values will trip up gcc
versions less than 2.8.1 on x86 platforms.
Documented unused function formals with `__unused__' before
the formal name. This also has the effect of supressing
warning messages for gcc since it's defined to be
`__attribute__((unused))' in the H5private.h file.
./src/debug.c
./src/h5ls.c
If the file name contains a `%' then the file is opened as a
file family with H5P_DEFAULT for the file member access
property list.
./src/h5ls.c
The group name is optional, defaulting to `/'.
./src/hdf5.h
Added some missing public header files.
----------------------
./configure.in
Moved setting of compiler warning switches earlier in the file.
Turned on more warning switches to gcc.
./config/linux
Prints a warning if the gcc version is less than 2.8.1 since
that version has problems with register allocation for `long
long'.
./html/Datatypes.html
Documented sharing of data types between datasets.
./src/H5G.c
./src/H5Gpublic.h
Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard
links. Still have soft links to do.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5D.c
./src/H5E.c
./src/H5Eprivate.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5HLprivate.h
./src/H5I.c
./src/H5Iprivate.h
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5Ssimp.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5detect.c
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tstab.c
Fixed comparisons between signed and unsigned values. Fixed
warnings about unused function arguments.
----------------------
./MANIFEST
./test/Makefile.in
./test/shtype.c [NEW]
Added some tests for shared data types.
./configure.in
Removed MF and HL from the default debug list since. MF
because it hasn't been implemented yet and HL because it
produces lots of annoying messages about adjusting the size of
local heaps.
./src/H5F.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug with opening the same file twice. The first close
on the file_id incorrectly closed shared data structs.
Closing a file now correctly unshares data types that might be
pointing into that file.
./src/H5T.c
./src/H5Tpublic.h
Added an H5Tis_shared(). The caller supplies a file and a
data type and the function returns true if the data type is
currently marked for sharing in that file.
./src/H5AC.c
./src/H5F.c
./src/H5HL.c
./src/H5HG.c
./src/H5MF.c
./src/H5O.c
We now detect errors sooner when writing to a read-only
file. In the past, the error might not show up until the
cached item was flushed, and it was sometimes possible to not
even get an error!
./src/H5I.c
./src/H5Iprivate.h
If the search function fails then H5I_search() returns
failure. Also, the first argument for the search function
isn't const anymore because we might want the search to have
side effects (like calling H5T_unshare() for all shared data
types whose file just closed).
----------------------
./MANIFEST
./src/Makefile.in
./test/Makefile.in
Added new files.
./config/linux
./src/H5HL.c
./src/H5HLprivate.h
./src/H5MF.c
./src/H5MFprivate.h
Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list.
./html/H5.format.html
Updated shared object message information.
./src/H5D.c
Datasets can now share data types.
./src/H5F.c
Updated a comment that referred to H5ACC_WRITE.
./src/H5HG.c
./src/H5HGprivate.h
Moved a few things around. Made debugging better so you can
now give a collection address to ./src/debug and it shows some
useful stuff.
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c [NEW]
./src/H5Ostab.c
Supports shared messages.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
The H5Tshare() function allows the user to give the library
hints about how a data type will be used.
./test/shtype.c
Tests the H5Tshare() function.
./test/gheap.c
Tests the global heap.
./configure.in
./config/BlankForm [NEW]
./config/alpha-dec
./config/freebsd2.2.1
./config/hpux10.20
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
Cleaned up lots of configuration stuff and made the site
configuration files lots easier and more uniform. To make a
new file grab the BlankForm and modify it.
By default, debugging is turned on for most packages. Within
a package one can use `#ifdef H5AC_DEBUG' to wrap debugging
code. Other options are:
--enable-debug
--enable-debug=yes
The default, most but not all packages.
--disable-debug
--enable-debug=no
--enable-debug=none
The symbol NDEBUG is defined and none of the package
debug symbols.
--enable-debug=all
Debugging is turned on for all packages. This might
produce lots of output.
--enable-debug=g,d
Debugging is turned on for H5G and H5D.
A compile mode is also now supported
--enable-production
--enable-production=yes
The library is compiled with optimizations turned on.
The compiler flags are augmented by adding PROD_CFLAGS
and PROD_CPPFLAGS which are defined in the site config
file.
--disable-production
--enable-production=no
The default. The library is compiled for development
by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in
the site config file. This is usually just `-g'.
--enable-production=profile
--enable-production=pg
Builds a library for profiling by including the flags
from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the
site config file. This is usullay just `-pg' but it
could include optimization flags as well depending on
the type of profile one wants.
In summary, configure by saying `./configure' and you'll get a
development version of the library. Configure by saying
`./configure --enable-production --disable-debug' and you'll
get a production version with no debugging code.
Bug fix
Problem:
Currently, RUNTEST cannot be set within the site config file because
configure explicitly sets the variable RUNTEST = "" after reading in
the site config file.
Solution: (REQUIRED)
A change was made in configure.in so that the variable RUNTEST is not
explicitly set to "". "autoconf" was then run on configure.in to
generate configure.
Platform tested:
TFLOPS Application server - sasn100
----------------------
./MANIFEST
./configure.in
./configure
./Makefile.in
./bin/distdep [NEW]
./config/conclude.in
./config/depend.in
./src/.distdep [NEW]
./test/.distdep [NEW]
Added some code so non-GNU systems have a list of dependencies
between the .c files and the .h files. Hopefully this works
and y'all don't have to keep saying `make clean' each time you
change a header.
On systems with GNU make, GCC, and Perl, the dependency
information is generated automatically from rules in
config/depend.in as has always been done. But now extra files
called `.distdep' (for `distributable dependencies) are left
in each directory and these are part of CVS and thus
releases. (A `make dep' will create dependencies on demand
without doing anything else.)
On systems lacking one or more of the tools above, the various
`.distdep' files are inserted into the end of the Makefiles.
If you do developement on one of these systems you'll have to
update the `.distdep' and/or Makefile by hand, or wait until
you have access to a GNU system and do a `make dep'.
----------------------
./configure.in
./configure
./test/iopipe.c
Added check for system(3)
./config/freebsd2.2.1
./config/linux
Added -DH5D_DEBUG to the debug flags.
./src/H5D.c
./src/H5Dprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./html/Datasets.html
Finally implemented strip mining in the I/O pipeline, placing
a user-defined upper bound on the amount of temporary memory
used by the pipeline. The default is 1MB type conversion and
background buffers allocated/freed on demand. However, the
size can be changed and/or application-allocated buffers
supplied with H5Pset_buffers() called on the data transfer
property list passed to H5Dread() and H5Dwrite().
Minor optimizations to H5Dread() and H5Dwrite(). More coming
later...
./test/dsets.c
Added calls to H5Pset_buffer() to test application-defined
temporary buffers in the I/O pipeline.
./test/Makefile.in
Removed `iopipe' from the list of confidence tests. Saying
`make timings' in the test directory runs timing tests. I did
this because (1) they don't really test anything new, and (2)
they can take a long time to run.
----------------------
./configure.in
./configure
./config/commence.in
Added checking for `ar' then `xar' and set the $(AR) variable
in the Makefiles. The check is not performed if $AR is
already defined in the environment (including being set in a
config file). We check for `-lcoug' for ASCI/Red.
----------------------
./src/H5D.c
./test/external.c
A contiguous dataset can now be stored in external files in
such a way that the slowest varying dimension can be increased
after the dataset is created and even written. The user must
have reserved enough space in the external file and the data
space must allow an increase the the slowest varying dimension.
See test_3() of ./test/external.c
./src/H5Oefl.c
./configure.in
./src/H5Fprivate.h
Fixed an overflow bug with unlimited external storage.
./src/H5V.c
Fixed a cast warning.
./test/dsets.c
Make better use of automatic error reporting.
----------------------
./bin/release
Changed default to not tag CVS sources.
./src/H5F.c
Replaced a constant switch with preprocessor directives.
Removed a local variable which was set but not used.
./src/H5Fprivate.h
Changed `long long' to `int64' to get rid of ansi warnings in
a few places.
Fixed bugs in INT64DECODE() and UINT64DECODE() for big-endian
architectures. This fixes all the bugs with the Irix -64
compile.
./src/H5F.c
The default address and length sizes are set according to the
sizeof(size_t) now that the bugs have been fixed.
./src/H5Fpublic.h
Removed a trailing comma in an enumerated type.
./src/H5Fstdio.c
./src/H5Fsec2.c
Added two more calls to fseek64() and lseek64(). Removed `long
long' in place of `int64' to suppress -ansi warnings.
./src/H5P.c
Replaced a FAIL with H5F_LOW_ERROR.
./src/H5private.h
./configure.in
Increased version number to hdf5-1.0.1a since we've already
released hdf5-1.0.0a. Include <sys/types.h>. Fixed
indentation. Fixed detection of off64_t for old Irix systems
where it might be a struct.
./src/Makefile.in
Moved a comment from the shell to the makefile since some
versions of sh barf on interactive comments.
./config/linux
Allow overriding of the CC variable from the command-line. It
still defaults to gcc but this allows us to specify a complete
path from test scripts by saying:
CC=/usr/local/tools/gnu/gcc sh configure
----------------------
./html/Files.html
./src/H5C.c
./src/H5Cpublic.h
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5Fsplit.c
./test/tstab.c
Added file-access property functions.
The split driver takes file extensions as properties.
./src/H5A.c
./src/H5Aprivate.h
Added some comments. Changed H5A_destroy() to call the free
function on all the atoms that are destroyed. This fixes a bug
where the file boot block isn't updated if the file isn't
closed before calling exit().
Removed extra `*' and `&' from some places.
./src/H5AC.c
Replaced an occurrence of NO_ADDR with NULL.
./src/H5Odtype.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
Data types of compound members are pointers.
./H5private.h
Some changes to make lseek64() work on Irix 5.3 where header
files don't realize that `long long' works.
./acconfig.h
./configure.in
Removed definition for PHDF5 since it looks like everyone is
useing HAVE_PARALLEL now.
./configure.in
./src/H5detec.c
Added checks for gethostname() and getpwuid().
----------------------
./configure.in
./src/H5Fprivate.h
./src/H5Fsec2.c
We now detect and use lseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Irix `-64'
compiler.
> $ ls -l istore.h5
> -rw-r--r-- 1 matzke meshtv 8605436856 Feb 17 14:03 istore.h5
./configure.in
./src/H5Fprivate.h
./src/H5Fstdio.h
We now detect and use fseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Iris `-64'
compiler.
./src/H5E.c
./src/H5Epublic.h
Added the H5E_OVERFLOW error to signal file address overflow.
./src/H5Fpublic.h
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
./html/Datasets.html
./html/Files.html
./html/H5.api.html
./html/H5.intro.html
./html/H5.sample_code.html
./html/ph5example.c
./html/review1.html
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/phdf5.c
Renamed file access constants to follow the naming scheme.
Also changed the base names a little to be more accurate as to
what they do. The old names H5ACC_WRITE and H5ACC_OVERWRITE
will temporarily work.
H5ACC_DEFAULT --> H5F_ACC_RDONLY for H5Fopen()
H5ACC_DEFAULT --> H5F_ACC_EXCL for H5Fcreate()
H5ACC_WRITE --> H5F_ACC_RDWR
H5ACC_OVERWRITE --> H5F_ACC_TRUNC
Albert or Kim: The H5ACC_INDEPENDENT and H5ACC_COLLECTIVE
macros in H5Fpublic.h should be an enum typedef and have names
more like H5F_MPIO_INDEPENDENT and H5F_MPIO_COLLECTIVE. Also
change the access_mode argument of H5Cset_mpio().
H5Fcreate() and H5Fopen() are more strict now about which
flags are acceptable for the operation.
./src/H5Fprivate.h
./src/H5F.c
./src/H5C.c
Changed the file access template to make it more general. A
union contains a struct for each type of low-level driver and
the default template is initialized at run-time.
./src/H5Fpublic.h
./src/H5F.c
Added H5Fget_access_template() and cleaned up
H5Fget_create_template().
./src/H5C.c
The H5Cset_mpi() no longer trashes the file access template
when an error is detected. We check for errors and *then*
update the file access template.
Added H5C_close() so Albert and Kim have a place to release
the MPI communicator and info from the file access property
list.
Kim or Albert: I notice in H5Cset_mpi() you copy the MPI
communicator. Do you need to do something similar in
H5C_copy()?
./src/H5F.c
Added more error checking for the file creation and access
property lists because it used to be possible to make the
library dump core by swapping the creation and access property
list ID numbers of H5Fcreate().
./test/istore.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/testphdf5.c
One must pass H5C_DEFAULT as the file creation or access
property list in order to get the default property list. It
is no longer possible to pass zero or any other arbitrary bad
object ID.
./src/H5Fcore.c
./src/H5Ffamly.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5MF.c
The file access property list is passed to all H5F_low_...()
functions and to the drivers.
./src/H5Fcore.c
The block size can be set at run time on a per-file basis
instead of at compile time across all files. The "5000 items in
a group test" now takes 1.6 seconds.
./src/H5private.h
Removed inclusion of mpi.h and mpio.h since they're included
from H5public.h.
./src/H5Cpublic.h
./src/H5C.c
Added H5Cset_stdio(), H5Cset_sec2(), H5Cset_core(),
H5Cset_split(), and H5Cset_family() in addition to the
H5Cset_mpio() that Kim and Albert already wrote. We still
need the H5Cget_driver() and an H5Cget...() counterpart for
each of those functions. The split and family drivers still
need a little work but I'm checking this in anyway.
----------------------
./MANIFEST
Added H5Fmpio.c. One way to check that you've properly
included new files is to run `./bin/release none', then unpack
the resulting tar file somewhere and try to compile it. The
tar file will be ./releases/hdf-5.0.0a.tar.
./config/freebsd2.2.1
./config/linux
Added `-ansi'
./acconfig.h
Added definitions for PHDF5 and HAVE_PARALLEL.
./configure.in
Added minimal support for parallel build. Kim and Albert will
have to flesh this out or I can do it if they're more specific
about what they need.
./config/commence.in
Added default value for $(RUNTEST)
./config/conclude.in
`make test' uses value of $(RUNTEST) to run test cases.
./src/Makefile.in
Added PARALLEL_SRC for conditional compilation of H5Fmpio.c
./src/H5D.c
./src/H5Dpublic.h
Added H5Dget_type() for Elena
NOTE: These changes require that configure be rerun. If you're using
GNU make it will happen automatically, otherwise do it by
hand.
./src/Makefile.in
Added new files.
./html/H5.apiv2.html
Added documentation for group stuff.
./src/H5private.h
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5Flow.c NEW
./src/H5Fprivate.h
./src/H5Fsec2.c NEW
./src/H5Fstdio.c NEW
Low-level file driver is selected at runtime.
./src/H5Fprivate.h
Got rid of `shift >= sizeof operand' warnings on big endian
machines.
./src/H5Fistore.c
./test/istore.c
Still working on indexed storage...
./src/H5H.c
./src/H5Hprivate.h
Removed alignment constraints.
----------------------
./config/depend.in
Fixed backslashes in sed script because the H5Gnode.c
dependency info was disappearing. You'll have to rerun
config.status to rebuild the Makefiles unless you use gnu
make.
./config/conclude.in
Also removes emacs backup files, TAGS, and svf backup files.
./config/linux
Grouped gcc flags and added provisions for debugging vs. production.
./html/H5.format.html
Updated messages 0x0008, 0x0009, and 0x000A.
./html/storage.html
Documentation describing storage schemes.
./src/Makefile.in
./test/Makefile.in
New source files.
./src/H5A.c
./src/H5Apublic.h
./src/H5C.c
Changed VOIDP to void* in a couple places.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./src/H5H.c
./src/H5O.c
Removed `const' from some variables because H5G_node_found() wanted
to modify it's udata argument. Removing const there caused it
to cascade to these other locations.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5H.c
./src/H5O.c
Added an extra argument to H5AC_find_f() and H5AC_protect(). This
arg gets passed to the load() method. Also added an extra
argument to the H5AC_find() macro.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Extra argument passed to the sizeof_rkey() method.
./src/H5Fprivate.c
./src/H5Fistore.c (new)
Added indexed I/O operations.
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
Beginning to add H5G_open/close and related bug fixes.
./src/H5Oprivate.h
./src/H5Oistore.c (new)
Added the H5O_ISTORE messsage (0x0008) for indexed storage of
objects.
./src/H5private.h
Added extra braces around both sides of the FUNC_ENTER() and
FUNC_LEAVE() macros so FUNC_ENTER() can appear before
declarations or after executable statements the second case is
used by H5G_namei() to initialize output arguments to sane
values before FUNC_ENTER() might return failure.
int f ()
{
int decl1;
printf ("This happens before FUNC_ENTER()\n");
FUNC_ENTER (...);
int another_declaration;
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Extra arguments for key encoding and decoding.
./src/H5E.c
./src/H5Epublic.h
./src/H5Fistore.c
./src/H5Oistore.c
./src/H5Oprivate.h
Indexed, chunked, sparse storage (not ready for general consumption
yet).
./src/H5V.c (new)
./src/H5Vprivate.h (new)
./test/hyperslab.c (new)
Vector, array, and hyperslab functions.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5Gnode.c
./src/H5V.c
./src/H5Vprivate.h
./test/hyperslab.c
Added functionality for indexed storage.
./src/H5F.c
Fixed problems with seek optimizing. Recommend we disable it
until we can implement it in the file/address class since all
of HDF5 must be aware of it.
./src/H5O.c
Fixed comeent speling erorr :-)
./MANIFEST
Added new files.
./config/conclude.in
Added the word `Testing' to the test cases. So if a test
program is called hyperslab then the make output will contain
the line `Testing hyperslab'.
./config/linux
The default file I/O library is Posix section 2 on my linux
machine so I can do some I/O performance testing.
./src/H5C.c
./src/H5Cprivate.h
./src/H5Cpublic.h
Added ability to set size of indexed-storage B-tree.
./src/H5D.c
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5Gshad.c
./src/H5Gstab.c
./test/stab.c
Changed `directory' to `group' in numerous places.
./src/H5private.h
The FILELIB constant can be set on the compile command-line.
./src/istore.c NEW
Tests for indexed storage.
Instructions for end users.
./INSTALL_MAINT NEW
Instructions and hints for maintainers.
./MANIFEST NEW
A list of names of files that are part of the HDF5
distribution.
./Makefile.in NEW
Top-level makefile template. See INSTALL and/or INSTALL_MAINT
for instructions on how to generate the Makefile from this
file.
./configure NEW
./configure.in NEW
Configuration shell script generated from configure.in.
./Makefile
Removed from CVS. This file is now generated by running
configure.
