insert high level library into main library
Description:
configure.in has a new entry (--enable-hl, disable-hl) it is on by default
the configure message prints info regarding if hl is enabled or not
the tree is
/hl
/hl/src
/hl/test
Solution:
Platforms tested:
linux
solaris
AIX
Misc. update:
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
Bug fix
Description:
Correct 'make check-install' failure by restoring previous behavior.
Platforms tested:
FreeBSD 4.8 (sleipnir)
should be the same for all platforms, h5committest not needed.
Update
Description:
Revamped the configuration system. The configurations for the Fortran
and C++ libraries are no longer separate from the "main"
configuration system. This involved removing the "configure*" and
"aclocal.m4" files from the fortran/ and c++/ subdirectories. Also
merging settings in the config/ subdirectories into the main config/
subdirectory.
Fortran header files had to be modified a little for Linux. It was
checking if it was a Linux machine by some #defines, however with the
-std=c99 switch, these defines weren't there. I added a check for
some other ones which should be there whether the -std=c99 switch is
used or not.
Platforms tested:
Verbena (Fortran & C++)
Sol (Fortran & C++)
Copper (Fortran & C++)
Modi4 (Parallel, Fortran, & C++)
Misc. update:
Improvement, IMO.
Description:
The parallel tests were run after all tools tests. For some parallel
systems, that could be a long time. Since tools are better tested
in serial mode and one would like to see the results of parallel
tests sooner in parallel mode, I moved the parallel tests before
the tools tests.
Platforms tested:
Only tested in Eirene, both serial and parallel modes.
No need for three platforms test since this is just a simple
Makefile change.
Bug fix and feature
Description:
The patch to Makefile.in failed if an empty directory of fortran/examples
was left behind by a previous build.
Solution:
Attempted to put it in config/conclude.in just became a mess since
it is hard to predict when we will include examples in the subdirs
or not.
Borrow the structure of install-examples and do some handcode per
interface. The Makefile.in of each interface (C, Fortran, C++)
controls everything. Not very systematic but pretty clean for this
case.
Platforms tested:
h5committested.
Also tested in modi4 with various combinations of fortran, c++
enabled.
Misc. update:
Feature
Description:
Added a simple way to run make check in the fortran/examples too.
This would be a good exercise of the installed h5fc command.
(A more systematic way, similar to install-examples, should be
implemented.)
Platforms tested:
h5committested--that only made sure the change did not break anything.
Also tested "make check-install" in modi4 to make sure the changes do
work.
Misc. update:
Feature
Description:
Added the check-install target to verify if installed software is
working. Currently only run "make check" in examples.
Platforms tested:
eirene
Bug Fix
Description:
``make uninstall-doc'' wasn't working properly. Some files would be
left behind in the installed source tree. The fix I put in was too
heavy-handed as it wiped out the entire doc tree that was installed
and would remove any other files which were installed there.
Solution:
Executed the ``make uninstall-examples'' command if uninstalling the
docs. Fixed how the java Tutorial examples were being removed (they
weren't). Essentially used the PUB_SUBDOCS macro to help remove them.
Platforms tested:
Linux
Feature
Description:
Change examples to use the installed h5cc to compile the examples
programs. That will test the correctness of the installed software.
Removed examples from make targets in the top level so that it does
not get invoked in make or make check since one cannot compile
the example programs until after "make install" has completed.
Platforms tested:
eirene and modi4 (parallel)
Purpose:
Feature Add
Description:
Added "install-example" and "install-all" to the Makefile system.
The behaviour of the "make install*" options:
make install - Installs binaries, libraries, include
files, and example programs.
make install-examples - Installs only the example programs.
The directories are:
${prefix}/doc/hdf5/examples/{c,c++,fortran}
make install-all - Install the binaries, libraries, include
files, example programs, and
documentation. The whole kit-n'-caboodle.
make uninstall-examples - Get rid of those example files (but not
the ${prefix}/doc/hdf5/examples/...
directories)
There's a new bin/ program which helps create directories which are
deeply nested called "mkdirs". It's a simple shell script.
Platforms tested:
Linux
Bug fix
Description:
Moved the position of the target of perform so that it is
included in compiling but not in the 'check' target.
Platforms tested:
eirene.
new feature
Description:
Added perform programs to test the HDF5 library performance. Programs
are installed in directory perform/.
Platforms tested:
eirene
Update
Description:
Remove the doc from the SUBDIRS macro since we don't have to go to
that directory for all make options. Add doc to the "cleaning"
actions...
Platforms tested:
Linux
Makefile.in:
acconfig.h:
src/H5F.c:
src/H5FDdpss.c:
src/H5FDdpss.h:
src/H5config.h.in:
test/dpss_read.c:
test/dpss_write.c:
Changed the name DPSS to GRIDSTORAGE since that is the real name
of the API from ANL. DPSS is just one of the protocols it can use.
Changed a bug in the --with-ssl option.
Makefile.in:
Removed the copying of Makefile.dist since it caused problems
when doing a make distclean in a --srcdir configured directory.
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
----------------------
./Makefile.in
Running `make' in the top directory recurses into the examples
directory also except if the make target is one of: lib,
progs, check, test, _test, install, uninstall.
./examples/Makefile.in
Changed programs into tests, which just means that `make
tests' does what `make progs' used to do and that `make check'
runs the executables.
./src/H5Tconv.c
Fixed a typo in the unsigned-to-signed native converter for
large types to small types. This fixes a bug on baldric and
possibly other machines for the `dtypes' test.
Also fixed a signed vs. unsigned warning.
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./src/H5D.c
Fill values are working for contiguous datasets now except
there are two things that need more support from the data
space layer, specifically the ability to form a selection from
the difference of two selections. They are (1) extending an
external contiguous dataset, (2) optimization by delaying the
fill until after the first H5Dwrite().
Renamed H5D_allocate() to H5D_init_storage() since allocation
is only part of the story. Added a data space argument so it
doesn't have to query the space from the object header -- the
space is always available in the caller anyway.
Removed `#ifdef HAVE_PARALLEL' from a few places where it
wasn't necessary. We don't need it around code that doesn't
compile anything from mpi.h or mpio.h.
./src/H5Fistore.c
Uncommented H5F_istore_alloc() for non-parallel and moved the
`#ifdef HAVE_PARALLEL' just around Kim's barrier.
./src/H5Fmpio.c
Wrapped a couple long lines.
Got rid of two signed vs. unsigned comparison warnings.
./MANIFEST
./test/Makefile.in
./test/fillval.c [NEW]
Added tests for fill values. The contiguous dataset extend
test is disabled until H5S_SELECT_DIFF is implemented.
./tools/Makefile.in
Fixed a bug where `make test' didn't build the executables
first. This should cause the snapshots to start up again.
./Makefile.in
Changed to build in `test' directory before `tools'
directory. We want the library tests to pass before we even
start considering the tools. You can still build and/or test
the tools independent of the library tests passing.
----------------------
./Makefile.in
Running `make distclean' will not fail if one of the
subdirectories has already been cleaned.
./config/BlankForm
./config/irix5.3
Cleaned it up more. Added better support/documentation for
systems that have more than one compiler.
./config/alpha-dec-osf4.0 [NEW]
Added a new config file as a result of testing on Jim Reus's
machine.
./test/chunk.c
Scaled down the testing range so we can actually run it
interactively.
./tools/h5import.c
Included <unistd.h> to get rid of warning for close().
./src/H5detect.c
Seg-faults on Linux for some reason when NDEBUG is defined, so
I just undef it at the top of the source.
./test/big.c
Added a fflush().
./tools/h5ls.c
The `-d' flag now works even when `-v' isn't specified.
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
Indented according to hdf5 standards.
Fixed compiler warnings
----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
Documentation (mostly)
Solution:
Parallel HDF5 support on Intel TFLOPS machine using PFS file system
and MPIO.
Platform tested:
Intel TFLOPS (ASCI Red)
----------------------
This checkin completes the compression stuff almost two weeks ahead of
schedule. It should now all be working and documented.
./Makefile.in
./config/commence.in
A distclean causes the distribution makefile to be copied to
Makefile again.
./src/H5D.c
Opening a compressed dataset now works properly.
./src/H5P.c
./src/H5Ppublic.h
The H5Pset_compression() and H5Pget_compression() now work as
documented.
./src/H5T.c
Fixed a bug that causes the library to crash sometimes if
debugging is turned on for the `t' package.
./src/H5Z.c
Fixed a bug where the number of bytes attributed to
compression overruns was too low in the debugging output.
./test/dsets.c
More compression tests: reading of uninitialized data, opening
an existing dataset and reading it, partial I/O which isn't
aligned on chunk boundaries, and use of application-defined
compression methods.
./MANIFEST
Removed ./test/dspace.c.
----------------------
./MANIFEST
./configure.in
./configure
./Makefile.in
./bin/distdep [NEW]
./config/conclude.in
./config/depend.in
./src/.distdep [NEW]
./test/.distdep [NEW]
Added some code so non-GNU systems have a list of dependencies
between the .c files and the .h files. Hopefully this works
and y'all don't have to keep saying `make clean' each time you
change a header.
On systems with GNU make, GCC, and Perl, the dependency
information is generated automatically from rules in
config/depend.in as has always been done. But now extra files
called `.distdep' (for `distributable dependencies) are left
in each directory and these are part of CVS and thus
releases. (A `make dep' will create dependencies on demand
without doing anything else.)
On systems lacking one or more of the tools above, the various
`.distdep' files are inserted into the end of the Makefiles.
If you do developement on one of these systems you'll have to
update the `.distdep' and/or Makefile by hand, or wait until
you have access to a GNU system and do a `make dep'.
New feature
Problem:
"make H5Tinit.c" from toplevel not supported.
Solution:
added in the lines
H5Tinit.c:
(cd src && $(MAKE) $@)
This and other changes already committed allow the sequential HDF5
library to be compiled and tested for the ASCI Red machine in the
following steps:
sasn100: configure -v tflop
janus: make H5Tinit.c #made possible by this check-in
sasn100: make >&! comp.out
janus: make _test >&! test.out
The name: indicates which machine the command line must be run from.
Platform tested:
ASCI Red machine: janus
----------------------
./INSTALL
./Makefile.dist
./Makefile.in
./config/conclude.in
Some stupid make's don't know what PHONY means. I added
changed config to _config in the default makefile and added
_test to the other makefiles.
./src/H5Psim.c
A `file_offset' argument got changed to `int' accidently that
causes tests to fail on 64-bit machines. I changed it back to
size_t.
./src/H5T.c
Changed a couple printf formats.
----------------------
./Makefile.in
./config/commence.in
With GNU make you can now use `-j' and `-l' options and things
get built correctly. I can do a `make -j -l6 test' from a
clean hdf5 source tree (after configure) in 45 seconds (8 to
build dependencies, 26 to compile everything, and 11 to run
the tests).
./src/H5Gnode.c
Removed a comment that no longer applies.
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
Changed H5Pselect_hyperslab() to H5Pset_hyperslab() and added
H5Pget_hyperslab() and H5P_get_hyperslab().
Replaced a couple short memset() calls with a for loop.
Removed `if (foo!=NULL)' from around H5MM_xfree() calls.
Clear hslab_def when the hyperslab disappears.
./src/H5Tpublic.h
Removed trailing enum comma.
----------------------
./Makefile.in
Added more dependencies to .PHONY.
./src/H5D.c
The write side of the I/O pipeline is implemented now too.
Things are looking good for the prototype and it's just a
matter of populating the library with the data type and data
space conversion functions.
./src/H5Farray.c
./src/H5Fprivate.h
./test/istore.c
Changed the order of the arguments for H5F_arr_read() and
H5F_arr_write().
./src/H5P.c
./src/H5Pprivate.h
Changed the names of the arguments of H5P_find(). Fleshed out
the mgath and fscat callback types.
./src/H5Psimp.c
Added stubs for H5P_simp_mgath() and H5P_simp_fscat() that
operate on the entire data space. Quincey, once you have the
data space hyperslab stuff in place let me know and I'll
finish the H5P_simp_*() functions to do partial I/O. Or you
can take a look at it too if you like; there's some comments
in there for you.
./src/H5V.c
./src/H5Vprivate.h
Changed dimensionality arguments from `size_t' to `intn' to be
consistent with the rest of the library and to get rid of
warnings on 64-bit Irix.
----------------------
./config/depend.in
Fixed backslashes in sed script because the H5Gnode.c
dependency info was disappearing. You'll have to rerun
config.status to rebuild the Makefiles unless you use gnu
make.
./config/conclude.in
Also removes emacs backup files, TAGS, and svf backup files.
./config/linux
Grouped gcc flags and added provisions for debugging vs. production.
./html/H5.format.html
Updated messages 0x0008, 0x0009, and 0x000A.
./html/storage.html
Documentation describing storage schemes.
./src/Makefile.in
./test/Makefile.in
New source files.
./src/H5A.c
./src/H5Apublic.h
./src/H5C.c
Changed VOIDP to void* in a couple places.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./src/H5H.c
./src/H5O.c
Removed `const' from some variables because H5G_node_found() wanted
to modify it's udata argument. Removing const there caused it
to cascade to these other locations.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5H.c
./src/H5O.c
Added an extra argument to H5AC_find_f() and H5AC_protect(). This
arg gets passed to the load() method. Also added an extra
argument to the H5AC_find() macro.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Extra argument passed to the sizeof_rkey() method.
./src/H5Fprivate.c
./src/H5Fistore.c (new)
Added indexed I/O operations.
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
Beginning to add H5G_open/close and related bug fixes.
./src/H5Oprivate.h
./src/H5Oistore.c (new)
Added the H5O_ISTORE messsage (0x0008) for indexed storage of
objects.
./src/H5private.h
Added extra braces around both sides of the FUNC_ENTER() and
FUNC_LEAVE() macros so FUNC_ENTER() can appear before
declarations or after executable statements the second case is
used by H5G_namei() to initialize output arguments to sane
values before FUNC_ENTER() might return failure.
int f ()
{
int decl1;
printf ("This happens before FUNC_ENTER()\n");
FUNC_ENTER (...);
int another_declaration;
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Extra arguments for key encoding and decoding.
./src/H5E.c
./src/H5Epublic.h
./src/H5Fistore.c
./src/H5Oistore.c
./src/H5Oprivate.h
Indexed, chunked, sparse storage (not ready for general consumption
yet).
./src/H5V.c (new)
./src/H5Vprivate.h (new)
./test/hyperslab.c (new)
Vector, array, and hyperslab functions.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5Gnode.c
./src/H5V.c
./src/H5Vprivate.h
./test/hyperslab.c
Added functionality for indexed storage.
./src/H5F.c
Fixed problems with seek optimizing. Recommend we disable it
until we can implement it in the file/address class since all
of HDF5 must be aware of it.
./src/H5O.c
Fixed comeent speling erorr :-)
./MANIFEST
Added new files.
./config/conclude.in
Added the word `Testing' to the test cases. So if a test
program is called hyperslab then the make output will contain
the line `Testing hyperslab'.
./config/linux
The default file I/O library is Posix section 2 on my linux
machine so I can do some I/O performance testing.
./src/H5C.c
./src/H5Cprivate.h
./src/H5Cpublic.h
Added ability to set size of indexed-storage B-tree.
./src/H5D.c
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5Gshad.c
./src/H5Gstab.c
./test/stab.c
Changed `directory' to `group' in numerous places.
./src/H5private.h
The FILELIB constant can be set on the compile command-line.
./src/istore.c NEW
Tests for indexed storage.
Instructions for end users.
./INSTALL_MAINT NEW
Instructions and hints for maintainers.
./MANIFEST NEW
A list of names of files that are part of the HDF5
distribution.
./Makefile.in NEW
Top-level makefile template. See INSTALL and/or INSTALL_MAINT
for instructions on how to generate the Makefile from this
file.
./configure NEW
./configure.in NEW
Configuration shell script generated from configure.in.
./Makefile
Removed from CVS. This file is now generated by running
configure.
