ISSUE2: the scale index input/output parameter value passed to H5DSiterate_scales was not always incremented (it returns the scale index current iteration).
SOLUTION FOR ISSUE2: modified the cycle in H5DSiterate_scales so that the scale index is always incremented
TEST: added some test cases with calls to invalid indices and H5DSiterate_scales with return scale indices and visitor data
tested: windows, linux
ISSUE: When some functions are called with an invalid dimension index (for example, greater than the rank of the dataset) the function does not immediately fail, rather asserts down the code.
SOLUTION: added this check for H5DSdetach_scale, H5DSset_label, H5DSget_label (the other functions have this check) . H5DSiterate_scales also added a check for an invalid dimension scale index
TEST: added some test cases with calls to invalid indices
DOCS: Nothing added
1. #1487 (B1) DS memory leaks ISSUE 1: On a "go to" error condition, previously allocated buffers were not freed. NOTE: these are "potential" memory leaks because typically the error conditions do not occur, so the potential memory leaks also do NOT occur. ISSUE 2: A function used to read dimension scales realistic data (topography of the North Atlantic, latitude and longitude) was being called without the data buffer being freed. SOLUTION FOR ISSUE 1: added "free" calls for the allocated buffers on the error sections. SOLUTION FOR ISSUE 2: added a "free" call after the read_data function, after using the buffer (on a H5Dwrite and H5Screate_simple). The read_data function reads both data and dimensions from the ASCII data files. DOCS: no docs added. Done for 1.9 and 1.8 STATUS: Closed bug
tested: h5committest
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
Add work-around to allow reading files that were produced with a buggy
earlier version of the library, which could create objects with the wrong
object header message count. There is now a configure flag
"--enable-strict-format-checks" which triggers a failure on reading a file
with this sort of corruption (when enabled) and allows the object to be read
(when disabled). The default value for the "strict-format-checks" flag is
yes when the "debug" flag is enabled and no when the "debug" flag is disabled.
Note that if strict format checks are disabled (allowing objects with
this particular kind of corruption to be read) and the file is opened with
write access, the library will re-write the object header for the corrupt
object with the correct # of object header messages.
This closes bugzilla bug #1010.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Make H5Tarray_create() and H5Tget_array_dims() versioned, and drop the
"perm" parameter from the '2' versions.
Shift internal library usage to '2' versions.
Add simple regression tests for '1' versions.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Pget_filter_by_id() API versioned and switch internal usage
to H5Pget_filter_by_id2().
Add simple regression test for H5Pget_filter_by_id1().
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Dopen versioned and change all internal usage to use H5Dopen2
Add simple regression test for H5Dopen1
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Remove all plain calls to H5Gopen() from source, replacing them with
either H5Gopen2().
Add test for H5Gopen1().
Reformatted several pieces of code, to clean them up.
Tested on:
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
Mac OS X/32 10.4.10 (amazon)
Pursue calls to H5Gcreate() relentlessly and ruthlessly exterminate
them, leaving only a few tame specimens in text files and comments. ;-)
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
Add --enable-deprecated-symbols configure option, to allow users to
remove deprecated public API symbols at configure time.
Add bin/make_vers script to bin/reconfigure actions.
Run bin/reconfigure to regenerate autotool components.
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
Linux/32 2.6 (kagiso)
2) Removing configuration of c++/src/H5cxx_pubconf.h file.
Reasoning: the additional pubconf file caused compilation complications, this is cleaner.
Tested: kagiso, smirom
Description: added new configuration to generate a pubconf file
in the c++/src directory, H5cxx_pubconf.h. When C++
compiler recognizes 'offsetof', the macro
H5_CXX_HAVE_OFFSETOF is defined in the new
pubconf file.
tested: kagiso, smirom
Description: a new configure flag has been created that will now set a macro
in the test/Makefile. The flag is with-default-vfd=. When set to
a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro
DEFAULT_VFD will hold this value.
Tested: kagiso, smirom, linew
file size from MPI_File_get_size. Bypass this problem by replacing it with
stat. Add an option --disable-mpi-size in configure to indicate this function
doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong
file size, print out a warning.
Tested on kagiso (parallel) because already tested the same change to v1.6 on
several platforms (kagiso, cobalt, copper, and sol).
bug fixes
substituted hize_t array index variables for int
stack corruption in the h52gif reading routine, wrote a new routine
shell script for gif tests, added check of program return value
enabled the gif test script
tested: linux pgcc, solaris, linux 64
Check in changes from Elena and I to get pgcc compiler working again.
Primarily (all?) changes to move from using 'hsize_t' as array index to using
something else ('size_t') mostly.
Tested on:
Linux/32 2.4 kagiso w/pgcc
Description: Multiple copies of Copyright appeared in Makefile.in. This was
due to automake copying the copyright right in the included files such as
config/commence.am.
Solution: Automake treats double hashes as comments and does not copy them
to Makefile.in. Changed all the copyright notices in config/*.am to use
double hashes for the Copyright right notice.
Tested: kagiso via bin/reconfigure.
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
It seems that while Cygwin supports the time command, it has trouble with
the syntax
srcdir="../../hdf5/test" time ./testhdf5
and complains.
The solution is to test the above case in configure and not to use the time
command if it fails; Cygwin is fine with
srcdir="../../hdf5/test" ./testhdf5
Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility
problem since every platform but Cygwin is already fine with the current
syntax.
The version of libtool used by HDF5 isn't directly affected by the reconfigure
script; instead, libtoolize --force must be used by hand. Libtool was the
source of the problem, so rolling its version back to 1.5.14 should solve the
issue (at least temporarily).
Reconfigure should still work on both heping and kagiso.
Tested on heping, kagiso, and tg-login3.
Should disable linking against shared libraries in Fortran for compilers that
don't support shared libraries.
Should also fix problem when the wrong Fortran file extension was specified.
If these changes don't solve the Daily Test issues, I'll look at backing out
the autotool version change until I have time to fix them.
Tested on heping, kagiso, juniper.
compression test.
Tested that the file is removed on juniper and heping.
Running reconfigure also regenerated the H5E* files (I think this means
somebody updated these files but didn't run reconfigure).
For some reason, only Visual Studio DLLs complained about these.
Current code compiles for me under Visual Studio and generates no related
warnings on juniper.
Clean up some compiler warnings and resolve some inconsistenceis between
hsize_t and size_t in the interface.
Tested on:
FreeBSD/32 4.11 (sleipnir) w/threadsafe
Linux/32 2.4 (heping) w/FORTRAN & C++
Linux/64 2.4 (mir) w/enable-1.6-compat
and quote its arguments. Also checks for the 'socket' library on
Solaris.
If this patch passes the Daily Tests and makes the user happy, I'll
port it back to the 1.6 branch.
Tested on mir and sol.
have an extra parameter that sets the deflate filter.
Added tests, made examples use the new APIs.
Cleaned up include files a little and removed some casts that I hope are
superfluous. If anybody encounters strange errors in the packet table
tests where the chunk size is set to some extremely large value, please
let me know, but I was unable to reproduce this error on any system.
Tested on mir, heping, sol, juniper, VS 6.0. Looked for the chunk size
error on several other systems a month or two ago.
Since these examples need to follow filesystem paths, the Makefiles need
to create directories in the examples directory; added this to the
Makefile.am.
Tested on Windows, mir, juniper
"make check-vfd" will now run all tests in the test directory with different
file drivers (at least, all of those tests that use the testing framework's
FAPL). Tests that fail will be skipped.
This is not a perfect fix, but is better than nothing.
Along with this change, check-vfd should be added to the Daily Tests.
Code cleanup
Description:
Trim trailing whitespace in Makefile.am and C/C++ source files to make
diffing changes easier.
Platforms tested:
None necessary, whitespace only change
Configuration feature
Description:
'make install' now tests both static and shared libraries if both are installed.
Solution:
Previously, shared libraries were only tested when static libraries were not installed.
Also cleaned up line in commence.am that was including HL library in all Makefiles.
Platforms tested:
mir (Makefile change only)
Bug fix - bugzilla #552
Description:
On Cray X1, trying to use : as an argument confused the system.
Solution:
Added a test in configure to see if : as an argument is bad.
If so, skipped the test.
Platforms tested:
mir, Cray X1 (change to configure only)
Description: dtype_file.txt is a text file for testing complicated compound type
for H5LTtext_to_dtype(). dtype_file_readable.txt is just a human-readable version
of dtype_file.txt for debugging purpose.
Platforms tested: No test.
Bug fix.
Description:
The ${TR}, though avoid the error, is inconvenient. It is needed
because configure.in use the char range in the style of 'a-z'.
The other style of '[a-z]' is more commonly accepted by all tr
but autoconf tends to strip away [], making the syntax rather
clumsy.
Solution:
Learned from autoconf that it avoids the use of character range
by just spell all the letters out. Changed our tr commands to
use those variables defined by autoconf. Also removed the
definition of ${TR} since it will cause inconsistancy when
autoconf also use plain 'tr' in its generated code.
The Makefile.in are changed because the elimination of ${TR} from
configure triggered its removal from all Makefil.in. That is okay
because ${TR} is not used at all in Makefile.
Platforms tested:
h5committested. (sol failed to connected). also tested in shanti
using both /usr/ucb/tr and /bin/tr (the bad one before.)
Misc. update:
Updated both INSTALL and RELEASE files.
Description: Yesterday, a definition of the macro YY_BUF_SIZE of 256KB
was committed in, but copper complained it can't be redefined.
Solution: Added #ifdef and #undef to make sure the macro is undefined
first. Also integrated a complicated compound type test. It reads
input from a text file. The datatype is unusually large, of 101 member
fields.
Platforms tested: h5committest and fuss.
Code cleanup
Description:
Big clean up on high-level library code, including:
- Removing include of HDF5 private header file(!)
- Reduce number of compiler warnings
- Untangle header files, etc.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/C++
Linux 2.4/64 (mir) w/C++ & FORTRAN
Several bug fixes
Description:
Added config file for Cray X1 (previous file was misnamed)
Simplified some code in hyperslab.c test that seemed to have been
confusing compiler on Cray X1.
Fixed typo in config/commence.am
Cleaned up hl/src/Makefile.am
Solution:
All four fixes should be straightforward. The failure on Cray was
very difficult to debug, but involved arithmetic errors.
This change seems to fix it.
Platforms tested:
heping, copper, sol, some Cray X1 (more testing when system comes back up)
new feature
Description:
1) separated the HL library into "public" and "private" header files, with the same caracteristics as the basic library
2) added the public headers to hdf5.h (with a conditional include macro, defined in configure.in)
3) added the path to HL in all Makefile.am 's , because of the inclusion in hdf5.h
Solution:
Platforms tested:
linux 32, 64
AIX
solaris
with fortran and c++
(one packet table example fails)
Misc. update:
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
Description: Revise a few details of H5LTtext_to_dtype() and H5LTdtype_to_text(),
1. changed the DDL definition of string, opaque, and compound types.
2. added a new parameter of H5LT_lang_t type to these two functions.
Platforms tested: h5committest and fuss.
Description: Renamed lex.yy.c to H5LTanalyze.c, y.tab.c to H5LTparse.c, and
y.tab.h to H5LTparse.h in hl/src. Changed definition of opaque type to ommit the tag.
Changed the test for opaque type in hl/test, too.
Platforms tested: h5committest, fuss, and sleipnir.
Misc. update: MANIFEST
Description: This is the second step of conversion between data type and
text, H5LTdtype_to_text().
Solution: Similar to h5dump, this function print the DDL description of
a data type into a string.
Platforms tested: h5committest and fuss.
Code cleanup
Description:
Fix a bunch of warnings flagged by Windows compilers.
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Bug fix
Description:
Fortran type generation was broken in two ways. Fixed both.
Solution:
Firstly, there were a couple of path problems. Fixed a typo and
specified the full path of a file.
Secondly, the dependencies weren't right when building with HDF5-specific
commands (make lib, make check-s, etc.). Tweaked dependencies
to fix the problem.
Platforms tested:
mir, modi4, sleipnir
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Before this checkin, 'gmake check-s' would fail if there was a file in
the current directory named 'check-s'.
This is fixed under gmake (not sure how to fix for other makes).
Solution:
check, progs, install, etc. are what gmake calls "phony" targets,
which means that no file should be created. These targets can be
specified by a line of the form
.PHONY: check progs install ...
Automake adds this line for targets it knows about, but HDF5 has a
lot of custom rules. This checkin adds a .PHONY line for those rules.
I believe that only gmake recognizes the .PHONY line (at least, pmake
doesn't seem to), but a partial solution is better than none.
This error should occur very rarely anyway (the user has to manually
create files with names like 'build-check-s' or '_test').
Platforms tested:
mir, sleipnir, modi4
Description: The g++ on sleipnir had troubles to compile the H5LTtext_to_dtype()
code.
Solution: Fixed problems at different places.
Platforms tested: h5committest and g++ on sleipnir.
Purpose: Minor bug fix
Description: Static function test_text_dtype() has static subroutines defined after itself. The gcc compiler on sleipnir complained.
Solution: put test_text_dtype() after subroutine's definition.
Platforms tested: sleipnir with gcc 4.0 where the complaints happened. Simple change.
Description: Adding the new function H5LTtext_to_dtype() for converting text description to data type.
The next step will be H5LTdtype_to_text().
Solution: Use Lex and Yacc to do parsing of the text. H5LTanalyze.l is the lexer for analyzing the
input; H5LTparse.y is the parser. They are not part of HL library, but are used to generate lex.yy.c
(from H5LTanalyze.l) as well as y.tab.c and y.tab.h (from H5LTparse.y). The tools used to create
these source files are GNU FLEX and YACC on a Linux machine (fuss). The commands are "lex H5LTanalyze.l"
and "yacc -d H5LTparse.y". Detailed document will be added later.
Platforms tested: h5committest and fuss.
Misc. update: MANIFEST
Bug fix/feature
Description:
Added support for -shlib in h5fc and h5c++.
Made check-install use -shlib when only shared libraries have been installed.
Solution:
h5fc and h5c++ didn't recognize -shlib. Stole code from h5cc to link against
shared libraries.
When static libraries are disabled, the examples Makefiles will automatically
use the -shlib option to link against shared libraries. Thus,
--disable-static and make check-install should work together.
Platforms tested:
heping(disable-static, enable-static, fortran, c++), modi4 (disable-static, fortran, c++, parallel, enable-static)
Bug fix
Description:
Failed parallel tests now cause make to exit with an error.
Solution:
Edited config/conclude.am to throw an error if parallel test programs fail.
Platforms tested:
heping, modi4
Bug fix
Description:
Changed configure.in to use an environment variable TR to set the path
to the tr utility.
Solution:
There are two kind of tr on Solaris with slightly different syntax.
HDF5's configure relies on the "standard" tr. Traditionally, HDF5ers
have needed to make sure that the "right" tr was found before the
wrong one in their path; now they can use an environment variable.
Platforms tested:
mir, shanti, sol
Misc. update:
Forgot to update release notes. Off to do that now.
Makefile bug fix
Description:
Previously, automake didn't output rules to build perform/mpi-perf or
the test/gen_* programs.
Now these can be built by typing 'make mpi-perf' (or 'make foo') or by
configuring with --enable-build-all.
Solution:
Automake doesn't like having rules for programs it doesn't build. Tricked
it by having these programs built "sometimes"--whenever the user enables
--build-all. This should be used mostly for testing and to ensure that
these helper programs compile.
***IMPORTANT***
These programs do *not* currently compile. When --enable-build-all is used
(not the default), gen_new_fill fails because it uses an old API. This is
an existing "bug" that has simply been exposed by this checkin.
Platforms tested:
sleipnir, modi4, sol
Misc. update:
bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Disabled C++ shared libraries for Sun Workshop compiler.
Solution:
This bug only seems to happen when using the -xarch=v9 flag to compile in
64-bit mode, but disabling shared libraries entirely for this compiler is
an easier fix (I don't know how to detect 64 bit mode from the command line).
The framework for disabling shared libraries for other C++ compilers is
in place.
Platforms tested:
sol, mir, sleipnir, modi4
Bug fix/feature
Description:
Disabled shared libraries for a number of Fortran compilers that don't
support them.
This allows other compilers to support shared Fortran libraries.
Solution:
Added a conditional, SHARED_FORTRAN_CONDITIONAL, which is true if
Fortran supports shared libraries. It is set in configure.in.
Platforms tested:
mir, sleipnir, colonelk, heping
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
Bug fixes
Description:
This checkin fixes an occasional error on kelgia on sol during distclean.
It also causes test scripts to depend properly on the programs they're
supposed to be testing.
Solution:
The kelgia bug was due to some files being cleaned by automake and manually.
Removed the manual cleaning in src/Makefile.am.
Test script dependencies now need to be specified manually, since the
makefile can't guess what they test from their name. Currently all test
scripts in a given directory have a single list of dependencies--this was
easy and seems to be sufficient.
These dependencies are listed in the SCRIPT_DEPEND variable in the Makefile.am.
Platforms tested:
heping, mir, modi4, sol
Misc. update:
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Code cleanup
Description:
Trim trailing whitespace, which is making 'diff'ing the two branches
difficult.
Solution:
Ran this script in each directory:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
improve documentation by comments
changed the return value of H5DSget_num_scales for a case when there are no scales attached from FAIL (-1) to 0
Description:
Solution:
Platforms tested:
linux
solaris
Misc. update:
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
bug fix
Description:
the fortran type integer*1 has become not portable.
define the image fortran datatype as "integer" and make special save, read, and palette functions
that use native integer for a memory type and UCHAR as disk type for the image data
added some more tests with new palette definitions
Solution:
Platforms tested:
linux
solaris
Misc. update:
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
add a new feature for the test image API, read a palette from an ASCII file and attach several
palettes to an image
Description:
Solution:
Platforms tested:
linux
solaris
AIX
IRIX
Misc. update:
add 1 test that reads realistic dimension scales data from an ASCII file and generates an hdf5 file with DSs
Description:
Solution:
Platforms tested:
linux
solaris
IRIX
Misc. update:
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
bug fix
Description:
when exiting due to a error condition on the goto out instruction there was an attempt to call
H5Dvlen_reclaim without checking if buf was null
Solution:
checket it
Platforms tested:
linux
solaris
IRIX64
AIX
Misc. update:
new tests
bug fix
Description:
added new tests for iterartors (on many scales, on group, on deleted scales)
fixed a bug on H5DSiterate, an ID of the referenced scale was not being closed on the cycle
Solution:
Platforms tested:
linux
solaris
Misc. update:
new tests for DS
Description:
add a test that ckecks if a scale being attached itself has scales attached (error)
add a test for the dataset being attached to is a reserved High Level class (image, palette, table)
Solution:
Platforms tested:
linux
solaris
Misc. update:
Added Packet Table to high-level APIs
Description:
The Packet Table is an API that allows the user to append records
("packets") to a table, and read the back again. It supports
fixed-length records with a defined datatype and variable-length
records. It also supports a "current record" index to track the
user's position in the table.
Solution:
The Packet Table code lives in hl/src, and its tests in hl/test.
Some code is shared between the H5TB table and the H5PT Packet Table
in the form of functions in H5HL_private.c.
Some documentation exists for a previous version of the API. Updated
documentation and C++ wrapper API coming soon.
Platforms tested:
sleipnir, eirene, copper, modi4
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Bug fix
Description:
The GASS VFL driver header file was bringing in the <string.h> header file,
which several other source code modules needed also, but weren't including
explicitly themselves.
Solution:
Add includes for <string.h> to files which actually need them.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/C++ as CC
Configuration not tested by h5committest...
Removed GASS configuration and software packages associated with
it. The following software are no longer configurable.
checking for main in -lcrypto... yes
checking for SSL_get_version in -lssl... yes
checking globus_common.h usability... yes
checking globus_common.h presence... yes
checking for globus_common.h... yes
checking for globus_module_activate in -lglobus_common... yes
checking for main in -lglobus_gass_cache... yes
checking for main in -lglobus_gaa... yes
checking for main in -lglobus_gss... yes
checking for main in -lglobus_gss_assist... yes
checking for main in -lglobus_io... yes
checking for main in -lglobus_gass_transfer_assist... yes
checking for main in -lglobus_gass_transfer... yes
checking for globus_gass_open in -lglobus_gass_file... yes
Platforms tested:
h5committested (but copper was down.) tested in modi4 too.
change
Description:
Minor changes to Dimension Scale API, to bring into alignment
with specification.
Solution:
Platforms tested:
verbena,shanti, copper64
Misc. update:
changed the function H5DSget_scale_name to return the size of the name buffer
added a test
Description:
Solution:
Platforms tested:
linux
solaris
Misc. update:
Bug fix
Description:
Discovered two small bugs.
When MAKE is defined as the empty string, a test in configure incorrectly
identifies it as pmake. Skipped this test if $MAKE is the empty string.
Two .h5 files produced by a test in the hl directory were not cleaned.
Updated the Makefile.am.
Platforms tested:
heping, modi4 (very minor changes)
new features/tests
Description:
add a couple more tests for the attach/detach pair of functions together with a verify function for it (used only for test purposes)
avoided addind the same scale twice to a dimension
all seems to be working very well
Solution:
Platforms tested:
linux
solaris
Misc. update:
new tests
Description:
added a new test for detach_scale, some minor changes in the the detach_scale function
Solution:
Platforms tested:
linux
solaris
Misc. update:
new test
Description:
added a test for the iterator function that verifies if the scales meet certain criteria (having the same size as
the dimensions sizes of the dataset and they are not empty datasets)
Solution:
Platforms tested:
linux
solaris
Misc. update:
Purpose:
Bug fix
Description:
modi4 dies during build with strange errors.
The root cause of these is a two-year-old hack in HDF5's libtool
script that only takes effect on IRIX.
Solution:
Edited the libtool hack (by editing ltmain.sh) to correct a bug in
the hack.
Also made sure that compiler-specific DEFAULT_LIBS are used
when linking.
Platforms tested:
sleipnir, copper, modi4, sol
Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Purpose:
Bug fix
Description:
Parallel builds were breaking in tools/lib
Solution:
talign didn't realize it depended on libh5tools.la because its
dependencies listed the full path (../../tools/lib/libh5tools.la).
Changed this, and made similar changes in a couple of other
directories.
This checkin should also add the --foreign flag to every Makefile.in
Platforms tested:
sleipnir (minor change)
New feature
Description:
Add basic code for new B-tree implementation. They don't do much yet,
aren't hooked up to anything yet and the format may change, but I'd like to
start getting them into the daily tests.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Bug fix
Description:
Found the permanant fix to automake/CVS dependency problem
Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.
Platforms tested:
heping sleipnir copper
Bug fix
Description:
Configuration files' timestamps were incorrect.
Solution:
Update Makefiles.in. Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.
Platforms tested:
sleipnir
DS new function
Description:
added the H5DSiterate_scales function with 2 operator functions and its tests
Solution:
Platforms tested:
linux
solaris
aix
windows
Misc. update:
Bug fix
Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.
Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.
Platforms tested:
sleipnir (No changes to Makefile content)
Bug fix
Description:
Different compilers use different flags to include Fortran module files
Solution:
Changed boilerplate to use configure variable rather than hardcoded -M flag.
Platforms tested:
sleipnir, sol, copper
added a first batch of dimension scales
fix some small bubgs in lite (a close function was not being called )
Description:
this batch contains the basic API functions described in the RFC and a minimal test file
Solution:
Platforms tested:
linux
solaris 64
AIX
windows
Misc. update:
changed the name of the hl table files back to H5TB.c and H5TB.h
this can be done now because the H5TB.c (threaded binary trees) file was removed from the hdf5 library
Description:
Solution:
Platforms tested:
linux
Misc. update:
Remove feature
Description:
Retire threaded, balanced binary tree code from HDF5 use. Requiescat in
pace...
Also, regenerate dependencies files.
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel
Too minor to require full h5committesting (the code is already
disconnected from everything except its tests)
Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-)
Description:
Generally speaking, this is the "signed->unsigned" change to selections.
However, in the process of merging code back, things got stickier and stickier
until I ended up doing a big "sync the two branches up" operation. So... I
brought back all the "infrastructure" fixes from the development branch to the
release branch (which I think were actually making some improvement in
performance) as well as fixed several bugs which had been fixed in one branch,
but not the other.
I've also tagged the repository before making this checkin with the label
"before_signed_unsigned_changes".
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel & fphdf5
FreeBSD 4.10 (sleipnir) w/threadsafe
FreeBSD 4.10 (sleipnir) w/backward compatibility
Solaris 2.7 (arabica) w/"purify options"
Solaris 2.8 (sol) w/FORTRAN & C++
AIX 5.x (copper) w/parallel & FORTRAN
IRIX64 6.5 (modi4) w/FORTRAN
Linux 2.4 (heping) w/FORTRAN & C++
Misc. update:
Description: Build failed in hl/test directory on OSF1 at PSC
Solution: It looks like that two extra blank lines after
CPPGLAGS definition caused the syntax error
I deleted the lines, and compilation went through
Platforms tested: lemiuex, heping
Misc. update:
Bug fix
Description:
Add dependency on the HDF5 library as well as the high-level library for
rebuilding tests.
Platforms tested:
FreeBSD 4.10 (sleipnir)
Too minor to require h5committest
bug fix
Description:
the Makefile.in of the hl tests was not including a "srcdir" include path
the test table .c file was missing also the srcdir path
Solution:
add it
Platforms tested:
Misc. update:
insert high level library into main library
Description:
configure.in has a new entry (--enable-hl, disable-hl) it is on by default
the configure message prints info regarding if hl is enabled or not
the tree is
/hl
/hl/src
/hl/test
Solution:
Platforms tested:
linux
solaris
AIX
Misc. update:
