Configuration improvement
Problem:
Arabica has a zlib library that is a dynamic lib in /usr/ncsa/lib.
Binary generated would fail to run with a missig libz.so complain
if /usr/ncsa/lib is not in $LD_LIBRARY_PATH. This exposed the
problem that if the binary is linked with -L$mylibpath -lxyz
where libxyz is a dynamic type, the binary can't run if $mylibpath
is not in $LD_LIBRARY_PATH (or equivalent) or as part of the
system default library paths (e.g., /usr/lib, /usr/local/lib).
This problem also caused failures during configure (when trying
to see what format to print long long) and during H5detect.
The base cause is because libtool does not "transfer" the
knowledge of -L$mylibpath to the wrapper file its mode=link
generates.
Solution:
bin/ltmain.sh:
Changed it so that it transfers the libpaths from -Llibpaths
to the wrapper generated. I used the already defined variable
finalize_shlibpath. Not sure it is correct to use it this way.
Need to check on this.
configure.in:
Put in a patch to transfer information from LDFLAGS to LD_LIBRARY_PATH
right before the AC_TRY_RUN. The above fix for ltmain.sh does not
work here because libtool is generated later than this point.
There should be a cleaner way to do this.
Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer
needed.
commence.in:
Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer
needed.
Makefile.in:
Another patch of LDFLAGS to LD_LIBRARY_PATH because I could not
make it to generate H5detect in the wrapper form of libtool.
Need to make it to use the libtool correctly. Later.
Platform tested:
arabica (solaris 2.7)
baldric (solaris 2.6)
hosts. Below is the help output for srcdir.
srcdir: Use srcdir option (does not imply other commands)"
"snapshot srcdir" is equivalent to "snapshot srcdir all"
"snapshot srcdir checkout" is equivalent to "snapshot checkout"
Also used shell variables to hold directory paths for easier maintenance.
** bin/rpmsync
** config/depend1.in
Tweaks for versions of `make' that can't search directories.
** examples/Dependencies
** src/Dependencies
** test/Dependencies
** testpar/Dependencies
** tools/Dependencies
Regenerated all these with more complete path names.
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
./configure.in
./src/H5config.h.in [REGENERATED]
The /usr/ncsa/{include,lib} directories are only added if they
actually exist. This fixes a warning on some systems.
Checks for the <pdb.h> header file and also for either the PDB or Silo
library, and if found prepares to compile the pdb2hdf program.
./config/distdep
Relative path names for include files are changed to base names since
the makefile contains the logic for searching and since it's likely
that building the .distdep files happed from a location other than
where they would be used in the file system.
./config/conclude.in
Fixed shell errors when `for' loops iterate over nothing for the
`uninstall' target.
./src/H5D.c
./src/H5Oefl.c
File names for the external files are added to the heap when the
dataset is created instead of when the object header is written. This
fixes a rare infinite recursion bug.
./src/H5FD.c
./src/H5FDpublic.h
Optimization to the free list causes H5FD_alloc() usage to go from >10
seconds to <0.4 second for one example (converting a 30MB equation of
state file from PDB to HDF5 format). The optimization is to simply
keep track of the largest item in the free list and not search the
free list when the largest item is not big enough to satisfy the
request.
./src/H5FDcore.c
./src/H5FDcore.h
./test/h5test.c
If the `backing_store' property is true then a flush causes the entire
contents of memory to be written to the specified file. This is in
preparation for the ASCI/red optimizations and is currently tested by
the pdb2hdf `--cached' switch.
./src/H5Odtypes.c
Wrapped three long lines.
./tools/Makefile.in
./tools/pdb2hdf.c [NEW]
A PDB-to-HDF5 translator. It only translates meta data -- the
resulting HDF5 points into the PDB file for the raw data.
ltconfig used just an empty source file to test the share lib
compiler options. SUNSpro CC returns succeed though it issues
a warning too. ltconfig did not like the warning.
Changed it to test with a file containing a simple dummy program.
Platform tested: solaris 2.6 and 2.7
config/solaris2.x:
Changed default compiler to "cc" now that Sunpro CC can produce
static and shared codes correctly.
Also added -s to PROD_CFLAGS to produce leaner binary files.
----------------------
This extensive change is the virtual file layer implementation. I've
ported and tested the sec2, family, and core drivers and only ported
the mpio driver (Albert will test it). So if you need MPIO I would
recommend sticking with the previous version for a while.
You will get a few compile warnings about split and stdio drivers not
being implemented and possibly tracing information not inserted in
some of the drivers. You can safely ignore them but I plan to fix
them.
I'm still working on the split driver because I just realized that it
needs a part of the VFL that isn't written yet.
Documentation is being updated also because there were some minor
changes (mostly just name changes). It should be available on my web
site later this week.
./MANIFEST
./src/Makefile.in
./src/hdf5.h
./src/H5Flow.c [REMOVED]
./src/H5Fstdio.c [REMOVED]
./src/H5Fsec2.c [REMOVED]
./src/H5Fsplit.c [REMOVED]
./src/H5Fmpio.c [REMOVED]
./src/H5Ffamily.c [REMOVED]
./src/H5Fcore.c [REMOVED]
./src/H5MFpublic.h [REMOVED]
./src/H5FD.c [NEW]
./src/H5FDcore.c [NEW]
./src/H5FDcore.h [NEW]
./src/H5FDfamily.c [NEW]
./src/H5FDfamily.h [NEW]
./src/H5FDmpio.c [NEW]
./src/H5FDmpio.h [NEW]
./src/H5FDprivate.h [NEW]
./src/H5FDpublic.h [NEW]
./src/H5FDsec2.c [NEW]
./src/H5FDsec2.h [NEW]
Removed/added files for virtual file layer.
./bin/trace
./src/H5.c
Removed unused public datatypes and added new VFL public
datatypes.
Changed an error message.
./config/BlankForm
./config/dec-flags
./config/gnu-flags
./config/hpux10.20
./config/hpux9.03
./config/irix5.x
./config/irix6.x
./config/solaris2.x
./config/unicosmk
Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the
configuration since they're no longer applicable. The default
file driver is always the sec2 driver and it always optimizes
calls to lseek() or lseek64().
./config/depend.in
C preprocessor errors generated during automatic dependency
building are sent to /dev/null to prevent them from appearing
twice in the make output.
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Oshared.c
./src/H5T.c
./src/H5detect.c
./test/ohdr.c
Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent
with the `haddr_t' datatype which is now a public type.
./src/H5D.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Tconv.c
./test/cmpd_dset.c
./test/dsets.c
./test/overhead.c
./test/tselect.c
./test/tvltypes.c
The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER
because the properties apply to all types of I/O operations,
not just datasets.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/big.c
./test/h5test.c
./test/istore.c
./testpar/t_dset.c
./testpar/t_file.c
./tools/h5debug.c
./tools/h5ls.c
Modified to work with the virtual file layer by calling H5FD_*
functions instead of H5F_low_* functions and by passing file
access and data transfer properties by object ID instead of
pointer.
Changed H5D_transfer_t to H5FD_mpio_xfer_t since the
COLLECTIVE vs. INDEPENDENT transfer mode is specific to the
MPIO file driver.
Moved MPIO-specific stuff into the MPIO driver.
./src/H5B.c
./src/H5D.c
./src/H5Fprivate.h
The H5F_mpio_* private functions were renamed and placed in
the H5FDmpio driver except those which appeared in H5Smpio.c.
./src/H5E.c
./src/H5Epublic.h
Added major error number H5E_VFL for virtual file layer
related errors.
./src/H5F.c
./src/H5Fprivate.h
Changed the logic that controls whether the boot block is
written. Instead of assuming that the first call to write the
boot block is only to allocate space, I've added a function
argument which makes this explicit.
Changed the way files are compared so that a driver-defined
comparison function can be called. Files which belong to
different drivers are always considered different.
Removed H5F_driver_t since file drivers are now identified by
object ID instead of a special non-user-extendible datatype.
Removed all the hard-coded low-level file properties which
have been replaced by the various file drivers.
./src/H5I.c
./src/H5Iprivate.h
Added the H5I_inc_ref() which was removed a few months ago
since we finally have a use for it.
./src/H5Ipublic.h
Added the H5I_VFL object ID type to identify file drivers in
the virtual file layer.
./src/H5MF.c
./src/H5MFprivate.h
Moved all the allocation/deallocation code into the virtual
file layer which allows file drivers to override much of it.
./src/H5P.c
./src/H5Ppublic.h
Moved file driver-specific code into the various file driver
files.
The H5Pcopy() and H5Pclose() functions make calls into the
virtual file driver to manage the memory for driver-specific
file access and data transfer properties.
./src/H5private.h
./src/H5public.h
The `haddr_t' type is now public.
./test/tfile.c
Added a few more comments.
The SunOS 5.6 version of `sed' must have slashes as delimiters
so I made sure that's all that's used in this script even
though it makes one pattern almost unreadable.
Added `use strict' and declared some variables.
./bin/trace [1.2, 1.3]
Added definitions for H5D_operator_t, H5MM_allocate_t, and
H5MM_free_t and regenerated tracing calls for the affected API
functions.
does cvs checkout only. Moved the "make distclean" code from the "test"
to the "release" part. (A distclean should definitely be applied as
part of the release command. Also, test might fail for other silly
reason, like AFS temporary out. The distclean blew away the option
of trying the tests by hand.
two tasks can be done selectively. This is mainly to allow doing the
test without running the release part automatically. After this is
tested out more to work fine, the "cvs checkout" part will be pulled
out also, so that it is possible to stage the cvs checkout during the
daytime when user is around to provide the AFS token. The test part
can be done at night by cron, provided the latest source has been
"staged". Following a successful test, the user can do the release
part by hand later, again with AFS tokens.
Also added options for using different locations of HDF4 library
and the ARCHIVE areas. Making it useful for different machines
setup.
Changes since 19990615
----------------------
./README
Version number synchronized with library.
./bin/h5vers
If the version number of the library is changed then the first
line of the README file is also changed to something like
This is hdf5-1.2.3 currently under development
The `release' script (which also gets run by `snapshot')
changes that line to include the release date but keeps the
version number the same. The net effect is that the version
numbers in README and H5public.h should now always stay
synchronized.
./bin/snapshot
The CVS checkin comment includes the version number for the
snapshot that was just made.
./tools/testh5toh4
Changed `*-SKIP-*' to `-SKIP-' to be consistent with the other
tests.
----------------------
Remove changes from CVS
./bin/release
Added a `--nocheck' switch which causes the script to not
check the contents of the MANIFEST file against CVS. This is
sometimes useful when you need to make a quick snapshot but
the MANIFEST file is not quite up to date.
./src/H5D.c
Removed warnings for unused variables
./src/H5Fprivate.h
Removed the WIN32 definition for `uint' and changed the data
type for `eof_written' from `uint' to `uintn'. Shouldn't this
really be `hbool_t'?
./src/H5Odtype.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./test/dtypes.c
./doc/html/H5.format.html
Added support for bitfields and opaque data types.
----------------------
./tools/h5ls.c
Added a `--address' (`-a') switch which causes h5ls to display
file addresses for raw data. For contiguous datasets it's just
a nice simple number, but for chunked datasets it's a list of
logical dataset coordinates, file addresses, filter masks, and
storage sizes.
Changed `--dump' switch to `--data'.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
Enhanced the indexed-storage B-tree iterator so it can dump
raw data addresses (and other info) to the standard error
stream.
Added H5Ddebug() so h5ls has a way to dump addresses for
datasets. I'm not sure what else this API function should do,
so I think we should discuss it before we document it. So far,
h5ls is the only thing that uses it, and we can easily change
that.
./src/H5Tconv.c
./test/dtypes.c
Finally had a chance to verify Paul's H5T_conv_s_s (general
string to string conversions) bug fixes and incorporate them
into H5T_conv_f_f (general floating-point to floating-point
conversions) and H5T_conv_i_i (general integer to integer
conversons). Thanks Paul.
./src/H5D.c
./src/H5S.c
./src/H5Sprivate.h
Added performance timers around data space read and write
callbacks. They were already there for the gather/scatter
callbacks.
The timings for read/write callbacks are displayed along with
gather/scatter when data space debugging is turned on.
./bin/iostats
Updated to print totals. Added a `--fast' option that doesn't
do any output except the totals and is much faster.
./bin/trace
Changed __unused__ to UNUSED to match source code.
./config/gnu-flags
Updated error message for pgcc. I've sent bug reports to the
pgcc people but the new version still has the same bug.
./configure.in
./config/conclude.in
./config/depend.in
Fixed dependencies for non-GNU makes when run in a directory
other than the hdf5 source tree.
Updated GNU `make dep' rules to copy the distributed
dependencies for non-GNU makes into the source tree when run
in some other directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./INSTALL
Added warnings and a disclaimer about GNU, DEC, Irix64, and NT
compilers that generate incorrect machine code.
./configure.in
./src/H5private.h
Detects and includes <sys/param.h> which is needed on FreeBSD
before <sys/proc.h> even though we only really using anything
from <sys/proc.h> on the DEC Alpha.
./config/irix64
Turned off warnings for duplicate definitions from the linker
because -lnsl on irix has the same stuff in it as -lc.
./config/irix6.x
Split up the CC and CFLAGS settings like with irix64 so that
compilers besides `-n32' can be used.
./bin/snapshot
The snapshots are tagged with names like hdf5-1_1_52 which is
similar to the way the releases are tagged (cvs doesn't allow
dots in tags).
./test/dtypes.c
./src/H5private.h
./src/H5Tconv.c
Fixed some alignment violations on the DEC when using high
optimization levels. The DEC incorrectly optimizes certain
memcpy() and memmove() calls when the source argument is not
word aligned if the call looks like it's copying an atomic
data type.
./test/hyperslab
Worked around code generation bugs in the Irix64 Mongoose 7.00
compiler by casting some `unsigned long' values to `unsigned'
in an expression.
./src/H5Ocomp.c
Fixed a place where %d was used to print a size_t.
----------------------
./configure.in
./acconfig.h
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5public.h
./src/H5Omtime.c
Check for <stddef.h>
Checks for `__tm_gmtoff' in `struct tm' because old versions
of GNU libc are different than recent versions. This fixes the
failing mtime test.
./bin/config.guess
./config/freebsd2.2.7 [REMOVED]
./config/freebsd [ADDED]
Changed the name so it works with all versions of FreeBSD.
./src/H5.c
Moved H5F after H5T and H5G in H5_term_library() to satisfy
dependencies.
./src/H5G.c
Fixed a bug that caused H5Gcreate() to fail if the group name
had trailing slashes.
./src/H5Gpublic.h
Changed `group_name' to `name' in a prototype.
./src/Makefile.in
Dynamic library on Linux, but needs for work to be generally
useful.
./src/H5HG.c
./src/H5HGprivate.h
Fixed alignment problems when using old GCC compilers (like
the one shipped with RedHad Linux).
./tools/h5ls.c
Fixed a bug where the contents of the root group could be
listed twice if there was a link back to the root
group. Similarly for groups that are mentioned on the command
line.
Fixed a bug where unknown types were printed with a random
type class number.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
Fixed O(log N) conversion bugs.
----------------------
./INSTALL
Added warning that enabling debugging code can adversely
affect performance even when the debugging isn't turned on at
run-time. Performance testing shows that under certain
circumstances (like data type conversions of compound types)
the H5_timer functions, although only a few lines each,
contribute a fairly large percent to the execution time.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Improved the H5Tunregister() function to make unregistering
more flexible. It takes the same arguments as H5Tregister()
but also accepts wild cards. All conversion functions that
match the H5Tunregister() search criteria are removed from the
global type conversion table.
The H5Tregister_hard() and H5Tregister_soft() were combined
into a single function called H5Tregister() which is the
counterpart to H5Tunregister(). A new `persistence' argument
was added to differentiate between the two types of conversion
functions.
The application is allowed to register a hard conversion
function for the no-op conversion path although the library
isn't obligated to call it (it usually does). This is mostly
for completeness, but the application might use it to help
determine if the raw data pipeline was able to use the
optimized path for the case when no type conversion is
necessary. The library doesn't allow this path to be
unregistered although the application can redefine it as often
as it likes.
Fixed the type conversion tables in preparation for MT-safety
and to fix previosly-known design bugs wrt. unregistering
conversion functions or changing the C function associated
with a conversion path. The MT-safety stuff is documented in a
separate white paper.
Increased the conversion function debugging name from 9
characters to 31 characters so the output can be more
descriptive.
Moved conversion path statistics from the H5T_cdata_t member
into the conversion path itself. This makes H5T_cdata_t
contain only application-visible data structures.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
Improved the way type conversion functions are called so the
caller doesn't have to check for data type debugging and
increment type conversion timers and statistics.
Changed check for no-op conversion since it is now
application-definable and there may even be more than one
definition at a time in a multi-threaded application (one
thread might be using the no-op conversion path when some
other thread changes its definition -- the first thread still
sees the original defintion until it's done with the
operation).
./doc/html/Datatypes.html
Updated the user guide to reflect the changes to data type
conversion registration functions.
./bin/trace
./src/H5.c
Added tracing support for the new H5T_pers_t data type.
./test/dtypes.c
Added printf to display alignment value if non-aligned data
types are being tested.
./test/h5test.c
Modified the H5Tunregister() calls to use the new
arguments. All 94 of those calls can be replaced by a single
call to the new H5Tunregister() function.
./src/H5.c
Added HAVE_GETTIMEOFDAY around an auto variable and
initialized the elapsed time to zero when gettimeofday() is
not available.
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
Added an H5*_init() functions which do the same thing as
H5*_init_interface() but can be called from other packages and
don't do anything if the interface is already initialized.
This fixes a couple memory leaks in applications that
repeatedly close and open the library with H5close().
./src/H5Tconv.c
Optimized some data alignment code in the hardware conversion
functions.
Hardware conversions accumulate statistics about source and
destination data alignment and print that information when the
conversion function is unregistered (usually when the
application exits) if data type debugging is compiled into the
library and enabled at run-time.
The conversion caching was cleaned up for the compound data
type conversion function. It now caches conversion paths in a
manner that will be MT-safe and is much simpler than the old
method. Also cleaned up some array index maps.
./src/H5detect.c
Fixd mispelling of alingemnt.
./src/H5private.h
Changed `TRUE' to `1' in assignment to interface_initialize_g
in FUNC_ENTER macro definition.
./tools/testh5dump.sh
Completely rewritten to make it shorter, better documented,
and conforming to most of the other test outputs.
The comparison of the actual output with the expected output
is insensitive to differences in white space. The test now
passes for the first time on Linux where the output width
wasn't as expected but the output was otherwise correct.
./tools/testfiles/tall-1.ddl
./tools/testfiles/tall-2.ddl
./tools/testfiles/tall-3.ddl
./tools/testfiles/tattr-1.ddl
./tools/testfiles/tattr-2.ddl
./tools/testfiles/tattr-3.ddl
./tools/testfiles/tattr-4.ddl
./tools/testfiles/tcomp-1.ddl
./tools/testfiles/tcomp-2.ddl
./tools/testfiles/tcomp-3.ddl
./tools/testfiles/tcomp-4.ddl
./tools/testfiles/tdset-1.ddl
./tools/testfiles/tdset-2.ddl
./tools/testfiles/tdset-3.ddl
./tools/testfiles/tdset-4.ddl
./tools/testfiles/tgroup-1.ddl
./tools/testfiles/tgroup-2.ddl
./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tlink-1.ddl
./tools/testfiles/tlink-2.ddl
./tools/testfiles/tlink-3.ddl
./tools/testfiles/tlink-4.ddl
./tools/testfiles/tlink-5.ddl
./tools/testfiles/tslink-1.ddl
./tools/testfiles/tslink-2.ddl
Changed `../h5dump' to just `h5dump'.
./config/alpha-dec-osf4.0
Added more warning and optimization switches to the native
compiler.
----------------------
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
The Makefile $TESTS variable has finally been split into
$TEST_PROGS and $TEST_SCRIPTS with the latter being the names
of shell scripts that need to be run with `/bin/sh'. Now we
don't have to copy each shell script before we run it. NOTE:
THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE
IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE.
./src/Makefile.in
Added H5Snone.c to the source list.
./src/H5G.c
Plugged a memory leak by emptying the object type "isa" table
when the library is closed.
./src/H5Tconv.c
./src/H5Tpkg.h
Added 48 new type functions to take advantage of hardware for
integer type conversions. These functions are not registered
in the conversion table yet because I haven't fully tested
them.
./src/H5Tpkg.h
Removed __unused__ qualifiers from prototypes.
----------------------
./bin/snapshot
Made same fix as for the release script yesterday.
./src/H5D.c
./src/H5Dprivate.h
./src/H5G.c
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5O.c
./src/H5Oprivate.h
./src/H5RA.c
./src/H5RAprivate.h
./src/H5T.c
./src/H5Tprivate.h
Improved object type checking. Instead of determining the
object type by trying to open each of the possible types, we
keep a table of associations between object type number (like
H5G_GROUP, H5G_DATASET, H5D_TYPE, and H5D_RAGGED) and an `isa'
function that returns true if the object header has the right
messages to make the object a particular type. This mechanism
also allows specialization of object types by permitting an
object to satisfy more than one `isa' function.
Added `isa' functions for groups, datasets, ragged arrays, and
committed data types.
./src/H5config.h.in
Added HAVE_STAT_ST_BLOCKS. I thought this had already been
added, but apparently not.
./tools/h5ls.c
Removed system include files since they're already included by
H5private.h and since I wasn't including them portably anyway.
By default, 1-byte integer types are printed as integer values
instead of ASCII characters. However, the `-s' or `--string'
command-line switch causes the data to be interpretted as
ASCII. String data types are always printed as character
data.
Ragged arrays are now identified as ragged arrays and h5ls
doesn't descend into the group automatically. This uses the
new object type specialization stuff.
./tools/h5tools.c
./tools/h5tools.h
Added the ability to print 1-byte integer types as either
ASCII or numeric data instead of always ASCII. The default is
to print as numeric data.
----------------------
./bin/trace
./src/H5.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
Added a `scope' argument to H5Fflush() which should be either
H5F_SCOPE_LOCAL or H5F_SCOPE_GLOBAL and determines which files
are flushed (just the specified file or the entire virtual
file).
./src/H5F.c
Added reference counts to the H5F_t struct so we get the
correct behavior between H5Funmount() and H5Fclose().
./src/H5O.c
Fixed a memory leak that happens during error handling.
./test/cmpd_dset.c
./test/unlink.c
Fixed a memory leak.
./test/mount.c
Enabled the H5Fclose() test.
