----------------------
./configure.in
./configure [REGENERATED]
./src/libhdf5.settings.in [NEW]
./config/conclude.in
./INSTALL
./MANIFEST
A file called `libhdf5.settings' is installed along with the
libraries and it contains a list of various things that might
be of interest to someone using the library (such as what
compiler/options were used and what other libraries might need
to be linked to satisfy external references). We can add more
things as it becomes necessary. Here's a sample...
SUMMARY OF THE HDF5 CONFIGURATION
=================================
HDF5 Version: hdf5-1.1.106
Configured on: Tue Jun 8 11:38:52 EDT 1999
Configured by: matzke@llnl.gov at Spizella Software
Configure mode: development
Host system: i686-pc-linux-gnulibc1
Byte sex: little-endian
Libraries: static, shared
Parallel support: mpicc
Installation point: /usr/local
Compiler: mpicc (egcs-2.91.66)
Compiler switches: -Wall -g
Extra libraries: -lmfhdf -ldf -lz -ljpeg -lm
Archiver: ar
Ranlib: ranlib
Debugged Packages: d,e,f,g,hg,i,mm,o,p,s,v,z
API Tracing: yes
File addresses: large
known so far do not need a "launching command" to run shell script.
(If a future system needs it, maybe we should use a new VARIABLE
called RUNSHELL, default to /bin/sh, to do the launching.)
Then inside the test shell script, it needs to know how to launch
serial or parallel executions. So, pass the RUNSERIAL and RUNPARALLEL
variables to the /bin/sh command.
----------------------
./tools/h5ls.c
Added a `--address' (`-a') switch which causes h5ls to display
file addresses for raw data. For contiguous datasets it's just
a nice simple number, but for chunked datasets it's a list of
logical dataset coordinates, file addresses, filter masks, and
storage sizes.
Changed `--dump' switch to `--data'.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
Enhanced the indexed-storage B-tree iterator so it can dump
raw data addresses (and other info) to the standard error
stream.
Added H5Ddebug() so h5ls has a way to dump addresses for
datasets. I'm not sure what else this API function should do,
so I think we should discuss it before we document it. So far,
h5ls is the only thing that uses it, and we can easily change
that.
./src/H5Tconv.c
./test/dtypes.c
Finally had a chance to verify Paul's H5T_conv_s_s (general
string to string conversions) bug fixes and incorporate them
into H5T_conv_f_f (general floating-point to floating-point
conversions) and H5T_conv_i_i (general integer to integer
conversons). Thanks Paul.
./src/H5D.c
./src/H5S.c
./src/H5Sprivate.h
Added performance timers around data space read and write
callbacks. They were already there for the gather/scatter
callbacks.
The timings for read/write callbacks are displayed along with
gather/scatter when data space debugging is turned on.
./bin/iostats
Updated to print totals. Added a `--fast' option that doesn't
do any output except the totals and is much faster.
./bin/trace
Changed __unused__ to UNUSED to match source code.
./config/gnu-flags
Updated error message for pgcc. I've sent bug reports to the
pgcc people but the new version still has the same bug.
./configure.in
./config/conclude.in
./config/depend.in
Fixed dependencies for non-GNU makes when run in a directory
other than the hdf5 source tree.
Updated GNU `make dep' rules to copy the distributed
dependencies for non-GNU makes into the source tree when run
in some other directory.
----------------------
./tools/h5tools.c
./tools/h5tools.h
Finally fixed a long-standing bug that caused core dumps if
a compound datum rendered to more than some number of
characters (we kept bumping up the limit at the risk of
violating stack size limits on some machines). The fix works
only on systems that have the vsnprintf() function (otherwise
a 4kB limit is imposed, which if violated probably dumps
core). If vsnprintf() is present then the library dynamically
allocates space for the output string.
Also made it possible to control how compound data is rendered
across multiple lines of output by allowing the caller to
specify where optional line-breaks get inserted. The output
functions split up the value at one or more optional
line-breaks to prevent it from wrapping around the screen.
If a datum doesn't fit on the current line but would fit on
the next line then it is printed on the next line regardless
of whether optional line-breaks would have prevent wrapping
around the screen. This makes it easier to find the beginnings
of compound data values. This feature is disabled by default
but can be enabled by the application.
If a datum doesn't fit on the current line and the previous
datum also occupied more than one line then we move to the
next line before printing. This makes it easier to find the
beginnings of compound data values but prevents the output
from looking fragmented if there are only a few long values
among mostly short values. This feature is disabled by
default but can be enabled by the application.
The application can control the printf() formats used for all
the native data types. The defaults are what the library used
to use: %g, %ld, %lu, %d, and %u
./tools/h5ls.c
Compound datatype values can now be split across multiple
lines of output instead of just wrapping. Also, when lots of
compound values are too long they all start at the beginning
of a line. This only required about 10 lines of changes in the
setup for tools library calls (I didn't modify the h5dump
program because it uses its own version of the tools library
that forked off long ago).
Added code for Win32 which is unable to cast `unsigned long
long' to `double'. If the dataset size exceeds (2^63)-1 then
the percent utilization is not displayed (this is easily
possible with chunked datasets). This is untested yet.
./configure.in
./src/H5config.h.in
./src/H5.c
./src/H5private.h
Check for vsnprintf() and provide a simple, stupid definition
if it isn't available. The stupid definition just calls
vsprintf() and ignores the second argument. This can result in
buffer overflows in h5ls and h5dump since vsprintf() is an
unsafe function (and anyone can create an hdf5 file that runs
an arbitrary command from h5ls and h5dump in that case)!
./config/conclude.in
Remove more *.o files for `make clean'
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
Cleaned up a memory leak during H5_term_library() by allowing
H5I_clear_group() to skip items that couldn't be freed. This
allows the item to remain in the group until we can free it
later.
./src/H5F.c
The H5F_close_all() function fails if a file cannot be closed.
----------------------
./config/commence.in
./examples/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Fixed some dependency problems in Makefiles. If the library
version is updated then everything gets recompiled.
./src/H5G.c
./src/H5R.c
Failure return value for object type functions is now
H5G_UNKNOWN as documented.
./src/H5Shyper.c
./src/H5Spoint.c
Fixed an unused argument warning.
./tools/h5debug.c
Fixed a call to H5F_block_read() since the 4th argument is
different now.
./tools/h5ls.c
Added a space between the object name and class to make the
output readable when the object name is longer than 24
characters.
C
----------------------
./config/depend.in
Fixed automatic dependencies. We were storing dependencies for
*.o files instead of *.lo files after shared libraries were
added.
./config/gnu-flags
./config/linux-gnulibc1
Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from
the linux file to this file and caused it to depend on the CPU
name. This fixes one of Elena's bugs.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5P.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Tpublic.h
./test/istore.c
Added an H5Dget_storage_size() function that reports the
amount of storage allocated for raw data in a dataset.
Changed H5D_xfer_* to H5F_xfer_* because these properties are
more general than datasets. This also allows some of the
lower-level I/O functions to get this information easier.
./src/H5S.c
./src/H5Sall.c
Added two new functions H5S_all_read() and H5S_all_write()
which are optimizations that copy data directly between file
and memory without having to go through the scatter gather
step. This knocks quite a bit of time off the I/O and
reading/writing entire datasets is a fairly common operation.
./tools/h5ls.c
Reports the logical size of data, the allocated size of data,
and the percent utilization.
./MANIFEST
Removed old pablo files, added new files. Snapshots should now
start to work again.
./src/H5D.c
./src/H5Fmpio.c
Removed two warnings signed vs. unsigned comparisons and check
for overflow.
----------------------
./config/commence.in
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
Fixed so private libraries are not installed publicly.
The installation directories `bin', `include', and `lib' are
created mode 755.
./src/H5.c
./src/H5A.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Vprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
./test/chunk.c
./test/dsets.c
./test/dtypes.c
./test/h5test.c
./test/overhead.c
./test/ragged.c
./test/tattr.c
./tools/h5dump.c
./tools/h5findshd.c
./tools/h5ls.c
Changed `__unused__' to `UNUSED' to fix a conflict with GNU
header files.
./src/H5Tpkg.h
./test/h5test.h
Removed __unused__ from forward function declarations.
./src/H5P.c
Removed a comment about restrictions for the type conversion
temporary buffers. Thanks to Quincey, the comment no longer
applied.
./src/H5T.c
Relaxed the H5Tpack() a little so it would pack compound data
structures that had non-transient atomic members.
./tools/h5ls.c
Added a `-g' (or `--group') flag that causes information to be
printed about the specified group instead of the group's
contents. (sort of like Unix's `ls -d'). The `-g' can be used
in combination with `-r' to print information about the group
and its contents.
./configure [REGENERATED]
./src/H5D.c
./src/H5O.c
Removed H5AC, H5B, and H5T from the default list of packages
to debug (because they're pretty expensive debugging), and
added H5O. Also fixed a bug for undefined variable in H5D when
H5S debugging is turned on but H5T debugging is turned off.
./config/conclude.in
Fixed installation of header files for building in a directory
other than the source directory. This fixes a bug where
H5config.h wasn't being installed.
./src/H5.c
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Tprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Changed the way the library shuts down again. Now it handles
cycles between packages and isn't so sensitive to dependencies
between packages. A package might shut down only to be
restarted to process a request from some other package being
shut down. Loops are detected after 100 iteractions and the
shutdown is aborted with a message on standard error. This
also makes it a lot easier to debug.
./src/H5A.c
Fixed H5A_write() and H5A_read() so they pass a non-null
background buffer to the conversion functions. This is
necessary when an attribute has a compound data type.
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
Reindented new Win32 stuff.
./src/H5Odtype.c
Fixed a bug when enumeration types are used in a compound data
type. The byte pointer wasn't incremented after the type
information was written.
./tools/h5ls.c
Compound data types display their total size because it's not
always obvious from looking at the members.
Scalar attributes show their space as `scalar' instead of
`{}'.
The index value is not printed for attributes that have only a
few values. Instead the word `Data:' is printed on the first
line of attribute data.
Named types display their data type only if verbose output was
requested.
----------------------
./configure.in
./configure [REGENERATED]
./config/commence.in
A few tweaks to the makefile rules for rebuilding makefiles.
./src/H5detect.c
Fixed a really stupid mistake: resetting the signal handler
after a longjmp(). This should fix Bob's SIGBUS on Solaris.
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
Temporarily commented out the code that tries to link a simple
MPI-IO application because I'm not sure how to pass $LDFLAGS
and $LIBS to the compiler.
Removed the `--enable-parallel=ibm' switch because the library
we link with is either -lmpcc or -lmpcc_r but not both. The
only way to tell is to see what compiler was specified (mpcc
or mpcc_r) but if that compiler is specified then we don't
need any libraries (the compiler script supplies them). That
leaves just two choices: the user must use a compiler script:
CC=mpcc ./configure
or the user must state which library is desired:
LDFLAGS='-lmpcc' ./configure --enable-parallel
Checks for <setjmp.h>, longjmp(), and signal(). We don't check
for setjmp() because it could be a macro (in fact, Posix
requires it to be a macro) and if longjmp() is present then
setjmp() is probably present too ;-)
./src/H5detect.c
The alignment detection loop uses SIGBUS and setjmp/longjmp
instead of fork/wait in order to get around bugs with forking
in conjunction with mpich. This hasn't been tested on the
SP-2 yet but it does work on the DEC Alpha.
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Changed the order that libraries are linked so -lhdf5 is
always before $LDFLAGS.
----------------------
./config/*-aix4.* [REMOVED]
./config/*-aix4.x [NEW]
./config/solaris2.5 [REMOVED]
./config/solaris2.x [NEW]
./configure.in
./configure [REGENERATED]
./MANIFEST
Changed the names of the IBM-SP2 config files by replacing the
minor version numbers with an `x'. The solaris config warns
about old versions of gcc.
The RUNSERIAL value is set to the empty string by default. The
config/* file (or user) can override it by setting it to some
other value.
The `--enable-parallel' with no flags turns on the
HAVE_PARALLEL constant in the source code but doesn't add any
MPI or MPI-IO libraries to the link line.
If we are compiling for parallel then configure checks that we
can actually link a very simple program. This has the benefit
of detecting config errors before we waste time compiling the
entire library.
Configure recognizes `mpcc_r' as a parallel compiler.
./src/H5A.c
./src/H5Apublic.c
Fixed some compiler warnings. Changed the return type of
H5Aget_name() from hssize_t to ssize_t because the name can
never be larger then memory.
OS cannot handle the 64 bit instruction sets. Let the local system
default takes care of preferred machine code.
Tested on both IRIX and IRIX64 platforms.
----------------------
./configure.in
./configure [REGENERATED]
The path for a command is calculated explicitly the hard way
because `type -path' isn't portable.
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc2
Changed the way files reference each other.
./config/gnu-flags [NEW]
./config/dec-flags [NEW]
These files figure out what flags to pass to certain compilers
so we can reuse code in more than one config/* file. They
also have better warning messages when old compilers are used.
./config/linux-gnulibc1
./config/dec-osf4.x
These files use the new *-flags files.
./src/H5D.c
./src/H5Onull.c
./src/H5Tconv.c
./tools/h5ls.c
Fixed a compiler warning.
./src/H5detect.c
Added a better comment to the top of the generated file.
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./INSTALL
Added instructions for using other compilers on Irix platforms.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
The presence of <sys/sysinfo.h> and <sys/proc.h> is only
checked on DEC/Alpha because there are too many problems
including these headers on other systems.
./config/irix6.x
./config/irix64
Removed `-ansi' and added a comment. Converting an ASCII UTC date
and time to a time_t value is not defined by ANSI or Posix but
is available if we don't use `-ansi'. This allows the dataset
modification time messages to be read properly by
H5Gget_objinfo().
./src/H5Tconv.c
Fixed a compiler warning.
./test/dtypes.c
./test/hyperslab.c
./test/istore.c
Fixed compiler warnings in printf() statements.
----------------------
./INSTALL
Added warnings and a disclaimer about GNU, DEC, Irix64, and NT
compilers that generate incorrect machine code.
./configure.in
./src/H5private.h
Detects and includes <sys/param.h> which is needed on FreeBSD
before <sys/proc.h> even though we only really using anything
from <sys/proc.h> on the DEC Alpha.
./config/irix64
Turned off warnings for duplicate definitions from the linker
because -lnsl on irix has the same stuff in it as -lc.
./config/irix6.x
Split up the CC and CFLAGS settings like with irix64 so that
compilers besides `-n32' can be used.
./bin/snapshot
The snapshots are tagged with names like hdf5-1_1_52 which is
similar to the way the releases are tagged (cvs doesn't allow
dots in tags).
./test/dtypes.c
./src/H5private.h
./src/H5Tconv.c
Fixed some alignment violations on the DEC when using high
optimization levels. The DEC incorrectly optimizes certain
memcpy() and memmove() calls when the source argument is not
word aligned if the call looks like it's copying an atomic
data type.
./test/hyperslab
Worked around code generation bugs in the Irix64 Mongoose 7.00
compiler by casting some `unsigned long' values to `unsigned'
in an expression.
./src/H5Ocomp.c
Fixed a place where %d was used to print a size_t.
----------------------
./config/irix64
The old (-32) compiler is now supported by setting envrionment
CC='cc -32'. The -64 compiler is the default or you can set
CC='cc -64'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5G.c
./src/H5I.c
./src/H5Ocomp.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Z.c
./src/H5detect.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/enum.c
./test/mtime.c
./test/ohdr.c
./tools/h5ls.c
Fixed lots of warnings on Irix64. Mailed a few remaining
warnings in H5S to Quincey and a few in the dumper to
Ruey-Hsia.
Bug fix
Problem:
Currently, when --enable_preduction --disable-debug modes are
selected during configure, the optimization level scheduled is
-O (-O2). Unfortunately, this level of optimization relaxes
too much the alignments necesary for the building, and testing
of the hdf5 library.
Solution:
Lower the level of optimiztion to -O1. This still maintains
required alignments.
Platform tested:
Irix6.5(fuga)
----------------------
./configure.in
./acconfig.h
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5public.h
./src/H5Omtime.c
Check for <stddef.h>
Checks for `__tm_gmtoff' in `struct tm' because old versions
of GNU libc are different than recent versions. This fixes the
failing mtime test.
./bin/config.guess
./config/freebsd2.2.7 [REMOVED]
./config/freebsd [ADDED]
Changed the name so it works with all versions of FreeBSD.
./src/H5.c
Moved H5F after H5T and H5G in H5_term_library() to satisfy
dependencies.
./src/H5G.c
Fixed a bug that caused H5Gcreate() to fail if the group name
had trailing slashes.
./src/H5Gpublic.h
Changed `group_name' to `name' in a prototype.
./src/Makefile.in
Dynamic library on Linux, but needs for work to be generally
useful.
./src/H5HG.c
./src/H5HGprivate.h
Fixed alignment problems when using old GCC compilers (like
the one shipped with RedHad Linux).
./tools/h5ls.c
Fixed a bug where the contents of the root group could be
listed twice if there was a link back to the root
group. Similarly for groups that are mentioned on the command
line.
Fixed a bug where unknown types were printed with a random
type class number.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
Fixed O(log N) conversion bugs.
Hard coded against intN_t types. They are not supported
by Intel Red but configure thinks they are by default for
cross-compiler. (Need a better solution for this.)
Bug fix
Problem:
When -with-hdf4 option is selected during configure,
no machine type found for HDF4 header file hdfi.h.
Solution:
Modify hdf5/config/linux file:
-D__i386 to be added to CPPFLAGS.
Platform tested:
linux(penfold)
----------------------
./INSTALL
Added warning that enabling debugging code can adversely
affect performance even when the debugging isn't turned on at
run-time. Performance testing shows that under certain
circumstances (like data type conversions of compound types)
the H5_timer functions, although only a few lines each,
contribute a fairly large percent to the execution time.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Improved the H5Tunregister() function to make unregistering
more flexible. It takes the same arguments as H5Tregister()
but also accepts wild cards. All conversion functions that
match the H5Tunregister() search criteria are removed from the
global type conversion table.
The H5Tregister_hard() and H5Tregister_soft() were combined
into a single function called H5Tregister() which is the
counterpart to H5Tunregister(). A new `persistence' argument
was added to differentiate between the two types of conversion
functions.
The application is allowed to register a hard conversion
function for the no-op conversion path although the library
isn't obligated to call it (it usually does). This is mostly
for completeness, but the application might use it to help
determine if the raw data pipeline was able to use the
optimized path for the case when no type conversion is
necessary. The library doesn't allow this path to be
unregistered although the application can redefine it as often
as it likes.
Fixed the type conversion tables in preparation for MT-safety
and to fix previosly-known design bugs wrt. unregistering
conversion functions or changing the C function associated
with a conversion path. The MT-safety stuff is documented in a
separate white paper.
Increased the conversion function debugging name from 9
characters to 31 characters so the output can be more
descriptive.
Moved conversion path statistics from the H5T_cdata_t member
into the conversion path itself. This makes H5T_cdata_t
contain only application-visible data structures.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
Improved the way type conversion functions are called so the
caller doesn't have to check for data type debugging and
increment type conversion timers and statistics.
Changed check for no-op conversion since it is now
application-definable and there may even be more than one
definition at a time in a multi-threaded application (one
thread might be using the no-op conversion path when some
other thread changes its definition -- the first thread still
sees the original defintion until it's done with the
operation).
./doc/html/Datatypes.html
Updated the user guide to reflect the changes to data type
conversion registration functions.
./bin/trace
./src/H5.c
Added tracing support for the new H5T_pers_t data type.
./test/dtypes.c
Added printf to display alignment value if non-aligned data
types are being tested.
./test/h5test.c
Modified the H5Tunregister() calls to use the new
arguments. All 94 of those calls can be replaced by a single
call to the new H5Tunregister() function.
./src/H5.c
Added HAVE_GETTIMEOFDAY around an auto variable and
initialized the elapsed time to zero when gettimeofday() is
not available.
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
Added an H5*_init() functions which do the same thing as
H5*_init_interface() but can be called from other packages and
don't do anything if the interface is already initialized.
This fixes a couple memory leaks in applications that
repeatedly close and open the library with H5close().
./src/H5Tconv.c
Optimized some data alignment code in the hardware conversion
functions.
Hardware conversions accumulate statistics about source and
destination data alignment and print that information when the
conversion function is unregistered (usually when the
application exits) if data type debugging is compiled into the
library and enabled at run-time.
The conversion caching was cleaned up for the compound data
type conversion function. It now caches conversion paths in a
manner that will be MT-safe and is much simpler than the old
method. Also cleaned up some array index maps.
./src/H5detect.c
Fixd mispelling of alingemnt.
./src/H5private.h
Changed `TRUE' to `1' in assignment to interface_initialize_g
in FUNC_ENTER macro definition.
./tools/testh5dump.sh
Completely rewritten to make it shorter, better documented,
and conforming to most of the other test outputs.
The comparison of the actual output with the expected output
is insensitive to differences in white space. The test now
passes for the first time on Linux where the output width
wasn't as expected but the output was otherwise correct.
./tools/testfiles/tall-1.ddl
./tools/testfiles/tall-2.ddl
./tools/testfiles/tall-3.ddl
./tools/testfiles/tattr-1.ddl
./tools/testfiles/tattr-2.ddl
./tools/testfiles/tattr-3.ddl
./tools/testfiles/tattr-4.ddl
./tools/testfiles/tcomp-1.ddl
./tools/testfiles/tcomp-2.ddl
./tools/testfiles/tcomp-3.ddl
./tools/testfiles/tcomp-4.ddl
./tools/testfiles/tdset-1.ddl
./tools/testfiles/tdset-2.ddl
./tools/testfiles/tdset-3.ddl
./tools/testfiles/tdset-4.ddl
./tools/testfiles/tgroup-1.ddl
./tools/testfiles/tgroup-2.ddl
./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tlink-1.ddl
./tools/testfiles/tlink-2.ddl
./tools/testfiles/tlink-3.ddl
./tools/testfiles/tlink-4.ddl
./tools/testfiles/tlink-5.ddl
./tools/testfiles/tslink-1.ddl
./tools/testfiles/tslink-2.ddl
Changed `../h5dump' to just `h5dump'.
./config/alpha-dec-osf4.0
Added more warning and optimization switches to the native
compiler.
----------------------
./src/H5.c
./src/H5Smpio.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpublic.h
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
The `long long' type isn't quite as prevalent as we had hoped;
there is at least one system that defines `__int64' but not
`long long'. Therefore, I've temporarily changed all
occurrences of `long long' to `long_long' and then #define
that in H5private.h based on the existence of `long long' or
`__int64'. This gets rid of some #ifdef's in other parts of the code.
The semantics of the hdf5 types are:
*int8_t Exactly one byte
*int16_t At least two bytes. We favor 32-bit integers over
16-bit integers if the 16-bit integer is 4-bytes wide
(Cray)
*int32_t At least four bytes.
*int64_t At least eight bytes
long_long The widest integral integer type
The H5Smpio.c contains debugging code which is non-portable.
./tools/h5ls.c
Changed the order native types are detected so we favor the name `int'
over `short' or `long' if two of them are the same.
./config/conclude.in
Added a rule to make test programs depend on the hdf5 library. This
fixes a minor bug where changing H5detect.c and then running `make
test' caused H5Tinit.c to not be recompiled and therefore the test
files are not relinked.
----------------------
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
The Makefile $TESTS variable has finally been split into
$TEST_PROGS and $TEST_SCRIPTS with the latter being the names
of shell scripts that need to be run with `/bin/sh'. Now we
don't have to copy each shell script before we run it. NOTE:
THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE
IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE.
./src/Makefile.in
Added H5Snone.c to the source list.
./src/H5G.c
Plugged a memory leak by emptying the object type "isa" table
when the library is closed.
./src/H5Tconv.c
./src/H5Tpkg.h
Added 48 new type functions to take advantage of hardware for
integer type conversions. These functions are not registered
in the conversion table yet because I haven't fully tested
them.
./src/H5Tpkg.h
Removed __unused__ qualifiers from prototypes.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
./configure.in
./acconfig.h
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added checks for functions, structs, constants, and header
files used in h5ls.c to determine the output width with
various Windows compilers and Unix variants.
Added check for <sys/stat.h> and defined
HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside
the Posix.1 #include's section.
./src/H5RA.c
Less aggressive about failing -- rather returns false, which
allows type detection to continue.
./src/h5ls.c
Data types are displayed for datasets and named data types when
`-v' or `--verbose' is specified on the command-line. The
algorithm is a little different than the dumper because we're
trying to be human-friendly, not necessarily machine-friendly.
* Any data type which matches a native C type gets printed
something like `native double'.
* A floating point type that matches one of the IEEE standard
types but not one of the native types gets printed like `IEEE
64-bit big-endian float'.
* Other floating point values have information about sign bit
location; exponent size, location, and bias; and significand
size, location, and normalization.
* Padding and offsets are displayed for types that have
padding (precision != size), including internal padding for
some floating point data types.
* Non-native integer types are displayed like `32-bit
little-endian unsigned integer'.
* Compound data types have each member displayed including the
member name, byte offset within the struct, dimensions, index
permutation, and data type.
* String types are displayed like `256-byte null-terminated
ASCII string'.
* References are displayed like `8-byte unknown reference'
until the reference interface stabilizes a little.
* All other types including types not yet defined will be
printed like `4-byte class-9 unknown'.
The dimensionality of scalar datasets is printed like `{SCALAR}'
instead of just `{}'.
If external raw files are used to store a dataset then the offsets,
sizes, and file names of each are printed if `-v' or `--verbose'
was given on the command-line.
If an object is found and h5ls can't determine the object type then
it still tries to print the number of hard links, the OID, and any
comment that might be present if `-v' or `--verbose' was specified.
If the `-d' or `--dump' switch is turned on then ragged arrays will
report that the data can only be dumped by dumping the component
datasets explicitly. I'm not planning to implement this since
we're going to eventually change the whole way ragged arrays are
stored.
Compound data values do not have the component names displayed by
default when `-v' or `--verbose' is turned on. Instead, the names
can be displayed with `-l' or `--label'.
The output width is determined by the first rule that applies:
* If the `-wN', `-w N' or `--width=N' switch appeared on
the command line then use N for the output width.
* Query the OS for the tty width in a highly unportable way
borrowed from GNU `less' depending on what functions and
data structures were found during configuration (if any):
_getvideoconfig(), gettextinfo(), _srcsize(), ioctl(),
GetConsoleScreenBufferInfo(), struct videoconfig, struct
text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl.
* If the `COLUMNS' environment variable is set then use
its value.
* Use the value 80.
Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv
test.vbt'. You can also try it on the various *.h5 files in the
test/example directories.
./config/linux
Removed turning on parallel by default on Robb's macine.
----------------------
This checkin is to fix a couple bugs for Jim Reus. Some features are
not fully implemented but it shouldn't break anything.
./config/conclude.in
./test/Makefile.in
`make clean' removes object files from the test directory as
well as a couple more *.h5 temp files.
./config/hpux9.03 [NEW]
New config file for HP/UX 9.03
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gstab.c
Not-yet-complete version of object removal.
./src/H5Fistore.c
./src/H5Fprivate.h
Experimental optimizations, disabled by default.
./src/H5Fprivate.h
Default low-level driver was changed to H5F_LOW_SEC instead of
H5F_LOW_STDIO because the sec2 driver is much easier to debug.
./src/H5Fsplit.c
./src/H5G.c
./src/H5Z.c
Changed a couple return statements to HRETURN.
./src/H5Odtype.c
Removed a check for nested compound data types from back when
they weren't implemented that raised an error.
./tools/h5tools.c
Increased temp buffer sizes and added a check for buffer
overflow so we fail an assertion (hopefully). This really
needs to be fixed sometime.
Added support for printing H5T_STRING data types.
