Bug fix.
Description:
The ${TR}, though avoid the error, is inconvenient. It is needed
because configure.in use the char range in the style of 'a-z'.
The other style of '[a-z]' is more commonly accepted by all tr
but autoconf tends to strip away [], making the syntax rather
clumsy.
Solution:
Learned from autoconf that it avoids the use of character range
by just spell all the letters out. Changed our tr commands to
use those variables defined by autoconf. Also removed the
definition of ${TR} since it will cause inconsistancy when
autoconf also use plain 'tr' in its generated code.
The Makefile.in are changed because the elimination of ${TR} from
configure triggered its removal from all Makefil.in. That is okay
because ${TR} is not used at all in Makefile.
Platforms tested:
h5committested. (sol failed to connected). also tested in shanti
using both /usr/ucb/tr and /bin/tr (the bad one before.)
Misc. update:
Updated both INSTALL and RELEASE files.
Several bug fixes
Description:
Added config file for Cray X1 (previous file was misnamed)
Simplified some code in hyperslab.c test that seemed to have been
confusing compiler on Cray X1.
Fixed typo in config/commence.am
Cleaned up hl/src/Makefile.am
Solution:
All four fixes should be straightforward. The failure on Cray was
very difficult to debug, but involved arithmetic errors.
This change seems to fix it.
Platforms tested:
heping, copper, sol, some Cray X1 (more testing when system comes back up)
new feature
Description:
1) separated the HL library into "public" and "private" header files, with the same caracteristics as the basic library
2) added the public headers to hdf5.h (with a conditional include macro, defined in configure.in)
3) added the path to HL in all Makefile.am 's , because of the inclusion in hdf5.h
Solution:
Platforms tested:
linux 32, 64
AIX
solaris
with fortran and c++
(one packet table example fails)
Misc. update:
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
Added high-level example directories
Description:
Refactored common code out of examples Makefiles.am, added high-level
example directories, added packet table examples.
Solution:
Examples now draw from a common config/examples.am file, which
contains rules for installing, uninstalling, and cleaning examples.
High-level example directories are mostly empty, except for the
C and C++ packet table tests.
Platforms tested:
mir, sleipnir, copper, shanti
Bug fix
Description:
Fortran type generation was broken in two ways. Fixed both.
Solution:
Firstly, there were a couple of path problems. Fixed a typo and
specified the full path of a file.
Secondly, the dependencies weren't right when building with HDF5-specific
commands (make lib, make check-s, etc.). Tweaked dependencies
to fix the problem.
Platforms tested:
mir, modi4, sleipnir
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Before this checkin, 'gmake check-s' would fail if there was a file in
the current directory named 'check-s'.
This is fixed under gmake (not sure how to fix for other makes).
Solution:
check, progs, install, etc. are what gmake calls "phony" targets,
which means that no file should be created. These targets can be
specified by a line of the form
.PHONY: check progs install ...
Automake adds this line for targets it knows about, but HDF5 has a
lot of custom rules. This checkin adds a .PHONY line for those rules.
I believe that only gmake recognizes the .PHONY line (at least, pmake
doesn't seem to), but a partial solution is better than none.
This error should occur very rarely anyway (the user has to manually
create files with names like 'build-check-s' or '_test').
Platforms tested:
mir, sleipnir, modi4
Bug fix/feature
Description:
Added support for -shlib in h5fc and h5c++.
Made check-install use -shlib when only shared libraries have been installed.
Solution:
h5fc and h5c++ didn't recognize -shlib. Stole code from h5cc to link against
shared libraries.
When static libraries are disabled, the examples Makefiles will automatically
use the -shlib option to link against shared libraries. Thus,
--disable-static and make check-install should work together.
Platforms tested:
heping(disable-static, enable-static, fortran, c++), modi4 (disable-static, fortran, c++, parallel, enable-static)
Bug fix
Description:
Failed parallel tests now cause make to exit with an error.
Solution:
Edited config/conclude.am to throw an error if parallel test programs fail.
Platforms tested:
heping, modi4
Bug fix
Description:
Changed configure.in to use an environment variable TR to set the path
to the tr utility.
Solution:
There are two kind of tr on Solaris with slightly different syntax.
HDF5's configure relies on the "standard" tr. Traditionally, HDF5ers
have needed to make sure that the "right" tr was found before the
wrong one in their path; now they can use an environment variable.
Platforms tested:
mir, shanti, sol
Misc. update:
Forgot to update release notes. Off to do that now.
Makefile bug fix
Description:
Previously, automake didn't output rules to build perform/mpi-perf or
the test/gen_* programs.
Now these can be built by typing 'make mpi-perf' (or 'make foo') or by
configuring with --enable-build-all.
Solution:
Automake doesn't like having rules for programs it doesn't build. Tricked
it by having these programs built "sometimes"--whenever the user enables
--build-all. This should be used mostly for testing and to ensure that
these helper programs compile.
***IMPORTANT***
These programs do *not* currently compile. When --enable-build-all is used
(not the default), gen_new_fill fails because it uses an old API. This is
an existing "bug" that has simply been exposed by this checkin.
Platforms tested:
sleipnir, modi4, sol
Misc. update:
bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Disabled C++ shared libraries for Sun Workshop compiler.
Solution:
This bug only seems to happen when using the -xarch=v9 flag to compile in
64-bit mode, but disabling shared libraries entirely for this compiler is
an easier fix (I don't know how to detect 64 bit mode from the command line).
The framework for disabling shared libraries for other C++ compilers is
in place.
Platforms tested:
sol, mir, sleipnir, modi4
Bug fix/feature
Description:
Disabled shared libraries for a number of Fortran compilers that don't
support them.
This allows other compilers to support shared Fortran libraries.
Solution:
Added a conditional, SHARED_FORTRAN_CONDITIONAL, which is true if
Fortran supports shared libraries. It is set in configure.in.
Platforms tested:
mir, sleipnir, colonelk, heping
Bug fix
Description:
Errors on sol may have been due to "make clean" being run both
manually and by automake. Removed the manual run.
Also cleaned c++/examples/ii_files directory created by some compilers
(e.g., on modi4).
Solution:
This does mean that examples directories will not be cleaned by
'make clean'.
Platforms tested:
sol, mir, heping, modi4
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
Bug fixes
Description:
This checkin fixes an occasional error on kelgia on sol during distclean.
It also causes test scripts to depend properly on the programs they're
supposed to be testing.
Solution:
The kelgia bug was due to some files being cleaned by automake and manually.
Removed the manual cleaning in src/Makefile.am.
Test script dependencies now need to be specified manually, since the
makefile can't guess what they test from their name. Currently all test
scripts in a given directory have a single list of dependencies--this was
easy and seems to be sufficient.
These dependencies are listed in the SCRIPT_DEPEND variable in the Makefile.am.
Platforms tested:
heping, mir, modi4, sol
Misc. update:
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Misc. update:
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fixes
Description:
A number of minor changes to Makefiles. Some files will now be cleaned
properly, some comments are more informative, etc.
Platforms tested:
heping, mir, modi4
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Added dependencies to examples Makefiles so that examples can be run in
parallel.
Solution:
The examples directories (for C, C++, and Fortran) all have some dependencies
explicitly spelled out in their Makefiles.am. This is a good short-term
solution, and should prevent errors in the Daily Tests.
Platforms tested:
mir, modi4 (parallel and sequential)
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Output tweak
Description:
Test output in C++ and Fortran directories now puts "C++ API:" or
"Fortran API:" in front of the name of the test being run.
I had overlooked the line of code that caused this to happen.
Solution:
Added HDF_CXX and HDF_FORTRAN variables to C++ and Fortran Makefiles.am.
Platforms tested:
heping (minor change)
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Removed GASS configuration and software packages associated with
it. The following software are no longer configurable.
checking for main in -lcrypto... yes
checking for SSL_get_version in -lssl... yes
checking globus_common.h usability... yes
checking globus_common.h presence... yes
checking for globus_common.h... yes
checking for globus_module_activate in -lglobus_common... yes
checking for main in -lglobus_gass_cache... yes
checking for main in -lglobus_gaa... yes
checking for main in -lglobus_gss... yes
checking for main in -lglobus_gss_assist... yes
checking for main in -lglobus_io... yes
checking for main in -lglobus_gass_transfer_assist... yes
checking for main in -lglobus_gass_transfer... yes
checking for globus_gass_open in -lglobus_gass_file... yes
Platforms tested:
h5committested (but copper was down.) tested in modi4 too.
