----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
----------------------
./bin/trace
./src/H5.c
Added tracing support for H5S_seloper_t and H5S_class_t.
./src/H5Sselect.c
./src/H5S.c
Added tracing statements that weren't inserted previously
because of formatting problems.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./test/cmpd_dset.c
Added H5Tinsert_array() for inserting an array member into a
compound data type. Added support to the struct conversion
function for member arrays. The index permutation is not
supported yet in the conversion (source and destination must
have the same permutations).
----------------------
./bin/trace
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5S.c
./src/H5T.c
Output-only arguments have their addresses printed during
tracing and added symbolic output for the H5F_driver_t
arguments. That's another reason that we should be careful to
add `/*out*/' after arguments that are output-only and
`/*in,out*/' after arguments that are used for both input and
output values.
No internal function calls H5Pget_class() anymore.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Added H5Tget_overflow() and H5Tset_overflow() so the
application can query or set a function that will be called
whenever an overflow occurs. Implemented as documented in
previous e-mail except the overflow handler gets two buffers:
one that contains the source value and one to receive the
optional destination value.
./test/dtypes.c
Tests overflow handler.
./src/H5.c
We have to declare fdopen() because I'm getting errors when
compiling on Irix64 even though we include <stdio.h> as
documented in the fdopen() man page.
----------------------
./src/H5T.c
Prints statistics for no-op conversions also.
For now, hardware floating point conversions may or may not
raise SIGFPE depending on the hardware, operating system,
etc. Software conversions never raise SIGFPE and use +Inf or
-Inf for overflow.
./test/dtypes.c
Catches SIGFPE and causes the test to be skipped. Better test
for NaN.
./config/irix5.3
Removed the -U_POSIX_SOURCE because it was removed from the
main makefiles.
./bin/trace
./src/H5S.c
Fixed a typo that prevented tracing info from being added to
new API functions.
----------------------
./MANIFEST
Added new files from testpar directory.
./config/commence.in
Removed -D_POSIX_SOURCE because hdf5 uses a couple of
non-Posix things when certain debugging flags are switched on.
to cleanup temporary files used by that particular module.
Added a cleanup() routine to testhdf5 that calls all the other
cleanup_xxx() routines to do cleanup.
Cleanup action can be disabled either by -c (no cleanup) option
or HDF5_NOCLEANUP environment variable.
----------------------
./src/H5Tbit.c
./src/H5Tpkg.h
Fixed a bug in H5T_bit_copy(). Added H5T_bit_get_d() and
H5T_bit_set_d() which treat portions of a bit vector as an
unsigned integer. Added H5T_bit_inc() that increments part of
a bit vector and returns an indication of overflow.
./src/H5Tconv.c
./src/H5Tpkg.h
./test/dtypes.c
Added a slow general floating point conversion which works so
far on Intel, MIPS, and DEC but the test is turned off because
a cast from double to float will cause a SIGFPE on some
systems if an overflow occurs.
Added fast hardware conversions between native floating point
types. This function is also subject to the SIGFPE problem.
./src/H5detect.c
Removed the exponent bias adjustment when the significand
isn't normalized. This is now handled in the conversion
functions instead.
./src/H5T.c
Register new conversion functions.
Plugged a memory leak in the library termination code.
./RELEASE
Added a list of major changes since the first alpha.
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5AC.c
./src/H5D.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5G.c
./src/H5Gprivate.h
./src/H5HG.c
./src/H5O.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
Fixed various compiler warnings on Irix64.
./src/H5MM.c
Added PABLO_MASK to this file.
./test/chunk.c
Removed a warning about memcpy().
./INSTALL_MAINT
./README
./RELEASE
Partially updated for second alpha, but haven't updated
version numbers yet.
./src/H5.c
./src/H5A.c
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5I.c
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5T.c
./src/H5Tconv.c
./src/H5detect.c
./test/hyperslab.c
./test/istore.c
Changed memory allocation functions so they fail instead of
dumping core. The `x' was removed from the name to remind us
of that: H5MM_xmalloc() -> H5MM_malloc(), etc.
H5MM_calloc() takes one argument like H5MM_malloc() instead of
two like calloc() because we almost always called it with `1'
for one of the arguments anyway. The only difference between
the two functions is that H5MM_calloc() returns memory which
is initialized to zero.
./src/H5Gent.c
./src/H5Gprivate.h
Removed H5G_ent_calloc() since it wasn't used.
./src/H5Fistore.c
Fixed a bug found by Albert. Thanks, Albert! This fix
combined with the changes to memory allocation prevent the
library from failing an assertion if the application uses an
unreasonable size for chunks (like Alberts 10000x10000x4).
./src/H5MF.c
./src/H5MFprivate.h
Changed H5MF_free() to H5MF_xfree() since calling it with an
undefined address is allowed.
----------------------
./html/Datatypes.html
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5detect.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/external.c
./test/tattr.c
./test/th5s.c
Organized the predefined data types.
./html/H5.intro.html
NO MODIFICATIONS! This file is a mess (obviously generated
from something else) so I skipped updating it!
./src/h5ls.c
./test/dsets.c
./test/tattr.c
./test/th5s.c
Added extra argument to H5Sget_dims() calls per Albert's last
update.
----------------------
./html/tracing.html NEW
This entire update is to make it possible for the library to
print the name, arguments, and return value of every API call
without requiring any extra work from developers or app
programmers. This file describes how this all works.
./configure.in
Added the `--enable-tracing' switch. If you use it then the
library will include code to print API function names,
argument names and values, and function return values.
However, you must then turn on the tracing by setting the
HDF5_TRACE environment variable to a file descriptor number.
The default is `--disable-tracing' since enabling it causes a
slight increase in library size and a slowdown resulting from
an extra function call for each API function call (I couldn't
even measure the slowdown :-)
./bin/trace NEW
A perl script that synchronizes the H5TRACE() macro calls in
the *.c files with the function return type and formal
argument names and types. If you use GNU make and gcc then
this will be done automatically, otherwise just invoke this
script with the names of one or more .c files. You could do
it by hand to, but encoding argument types is a little tricky
at first.
./config/commence.in
Added the $(TRACE) macro, which defaults to the no-op.
Added -D_POSIX_SOURCE to the compiler command line.
./src/Makefile.in
Override the default for $(TRACE).
./config/depend.in
Automatically calls $(TRACE) to synchronize the H5TRACE()
macros in any source file that changed. As with makefile
dependencies, one way to force synchronization of all files is
to remove the `.depend' file.
./MANIFEST
Added new files.
./src/H5Eprivate.h
Modified HRETURN_ERROR() and HRETURN() for tracing.
./src/H5.c
./src/H5private.h
This is where the real tracing work really happens, in
H5_trace().
./src/H5A.c
./src/H5D.c
./src/H5G.c
./src/H5P.c
./src/H5S.c
./src/H5Z.c
Added H5TRACE() calls to all API functions. You don't really
need these changes if you don't want to merge your stuff
because they can be generated automatically by going to the
hdf5/src directory and saying ../bin/trace *.c
./src/H5T.c
Added H5TRACE() calls. Other stuff below.
./src/H5E.c
./src/H5Epublic.h
Added H5TRACE() calls. Created a type H5E_auto_t for the
`func' argument of H5Eset_auto() and H5Eget_auto() to make
those arguments easier to parse for tracing. It should also
make it clearer for users that don't know how to read
complicated ANSI data types.
./src/H5F.c
Added H5TRACE() calls. Changed a couple `uintn' argument
types in API functions to `unsigned int' since `uintn' part of
the API. Changed a few "can't" and "cant" error messages to
"unable to".
./src/H5Ipublic.h
Removed H5_DIRECTORY from the H5I_group_t enum. It wasn't
used anywhere.
./src/H5Tconv.c
Removed an unused label.
./src/H5Fistore.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5T.c
./test/dsets.c
./test/dtypes.c
Fixed a warning about a variable possibly used before it's
initialized. Added __unused__ to turn off some unused
argument warnings that pop up when debugging is turned off and
optimizations are turned on.
----------------------
./src/H5Tbit.c
./MANIFEST
./test/Makefile.in
./test/bittests.c NEW
Finished the bit vector operations and added test cases.
./src/H5Tconv.c
./test/dtypes.c
Finished integer->integer general conversion and added test
cases. Overflows and underflows are handled by substituting
the closest possible value. Examples:
(unsigned)0xffff -> (unsigned) 0xff
( signed)0xffff -> (unsigned)0x0000
(unsigned)0xffff -> ( signed)0x7fff
( signed)0x7fff -> ( signed) 0x7f
( signed)0xbfff -> ( signed) 0xbf
( signed)0x8000 -> ( signed) 0x80
./src/H5private.h
Added definitions for MIN and MAX that take 3 or 4 arguments:
MIN3(), MIN4(), MAX3(), MAX4(). Also added MIN2() and MAX2()
as aliases for MIN() and MAX().
./test/tattr.c
Removed some redundant `&' operators.
./configure.in
./src/H5config.h.in [regenerated]
./src/H5.c
Fixed warnings on DEC where long double is the same as
double.
----------------------
THIS CHECKIN IS FOR QUINCEY -- NOT EVERYTHING WORKS (but it compiles)
MOST OF THE CHANGES ARE FOR BETTER TYPE CONVERSION IN THE NEXT ALPHA
./MANIFEST
./src/H5Tbit.c NEW
./src/Makefile.in
Bit vector operations (not done yet)
./configure.in
Added -lm to the library list, needed by bit-vector operations
and conversion functions.
Removed vestiges of PARALLEL_SRC no longer used by the
makefiles. Albert came up with a better way (that actually
works :-)
./src/H5D.c
No code changes. Split a couple of long lines, refilled a
couple multi-line comments.
./src/H5T.c
./src/H5Tpublic.h
Fixed a bug reported by Jim Reus regarding conversion of
compound data types whose members require conversions which
are satisfied by as-yet unregistered soft conversion
functions.
Added H5T_IEEE architecture, but the funny-looking integer
types will be changed to H5T_BE_ and H5T_LE_ architectures
with the type names changed to match the H5T_NATIVE_ integers.
Added an H5Tconvert() but it hasn't been documented or tested
yet.
./src/H5Tconv.c
./src/H5Tpkg.h
Registered conversion functions integer->integer (a general
case) and integer->float (for a specific case). The
integer->integer conversion depends on the bitvector
operations which aren't finished yet and the int->float
conversion hasn't been retested since it was borrowed from
AIO. Don't look at them yet, they're ugly :-)
./src/H5detect.c
Fixed a typo which caused the msb_pad field of an atomic type
to not be initialized.
./test/dtypes.c
Added a test for number conversions but it's commented out
until the conversion stuff is truly working.
./src/H5F.c
./src/HFcore.c
./src/H5Ffamily.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5MF.c
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_alignment() so that it is now possible to align
file allocation requests on application-specified
boundaries. Any request >= the specified threshold will begin
on an address which is a multiple of the specified
alignment. Defaults are one for threshold and alignment. The
alignment is done on relative addresses, so the size of the
user block can affect the location of the data in the file.
./src/H5D.c
./src/dsets.c
Added a test for, and fixed the data space caching bug in
datasets. Extending a dataset through one handle will cause
all other handles to the same dataset to get the new dataset
size.
./src/H5S.c
./src/H5Sprivate.h
Removed an unused argument from H5S_read() which duplicated
information from the other argument.
./config/linux
Made `--enable-parallel' the default on my system. It used to
be that way before but then I accidently turned it off and
forgot about it.
./src/H5Fmpio.c
Qualified some function arguments with __unused__. Changed a
couple places where NULL was returned on error for herr_t
functions.
./src/H5P.c
Removed unused autos from H5Pset_mpi().
----------------------
./src/H5A.c
Named data types can have attributes.
Fixed bugs where the API functions didn't check the return
values of their internal counterparts and thus the automatic
error reporting didn't work.
Fixed some places where the error stack wasn't cleared after a
function returned failure.
Data types returned by H5Aget_type() are always read-only.
If the `attr_num' argument of H5Aiterate() is null then it
acts like H5Giterate() instead of failing -- it begins
processing attributes with the first one.
./src/H5D.c
We check for allocation overruns when scalar datasets are
stored in external files.
./src/H5O.c
H5O_modify() will fail if the message is >=16kB.
./src/H5Oattr.c
Split some long lines
./src/H5T.c
./src/H5Tprivate.h
Added H5T_entof() to support attributes on named types.
./src/h5ls.c
Prints the names of attributes and their sizes.
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/gheap.c
./test/istore.c
./test/links.c
./test/shtype.c
If the environment variable HDF5_NOCLEANUP is defined then the
temporary files are not removed. The testhdf5 program still
has the bug that it removes *.h5, clobbering test files from
other programs... oh well.
./test/dtypes.c
Added attribute tests.
----------------------
./html/Datatypes.html
Updated documentation for named data types and type sharing.
./src/H5Farray.c
Split a couple long lines.
./src/H5T.c
The H5T_copy() demotes immutable types to read-only types so
they're cleaned up properly and memory is not leaked.
./test/dtypes.c
Modified to be more consistent with other tests. Removed all
internal header files, constants, types, and functions calls
since the API is now complete enough to test
everything. Temporary files are now removed.
Added tests for transient and named types and their use in
datasets.
./test/shtype.c
Commented out all the tests since they no longer apply.
./test/chunk.c
Removed a couple int->double coercion warnings.
----------------------
./html/Datasets.html
Fixed a couple of typos.
./src/H5.c
Added the `Z' modifier to HDfprintf() for `size_t' sizes. Use
it like this:
HDfprintf(stderr,"size is %Zd\n", (size_t)x);
./src/H5AC.c
./src/H5F.c
./src/H5Fprivate.h
The maximum number of meta data objects that can be cached can
be set from the application (but the library might not honor
it every time; it's a hint).
./src/H5D.c
Changed a warning message so it's not so alarming.
./src/H5Fistore.c
Chunks can be cached.
./src/H5O.c
./src/H5Oprivate.h
Added H5O_copy() and H5O_free() to copy and free messages.
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_cache() and H5Pget_cache() and changed lots of
"template" to "property list".
./src/H5Z.c
./src/H5Zpublic.h
Miscellaneous little things to clean up. Mostly just removed
H5Z_MAXVAL and added H5Z_USERDEF_MIN and H5Z_USERDEF_MAX.
./MANIFEST
./test/Makefile.in
./test/chunk.c [NEW]
Added a performance test for chunk caching. It looks at the
amount of I/O instead of timing because timing is partly
dependent on the chunk size and I wanted a measurement that
was a function of only the cache size. Run `chunk' with no
arguments and then say `gnuplot x-gnuplot' to see the plots
(press return between plots). Postscript files are created for
each plot.
./test/big.c
./test/cmpd_dset.c
./test/extend.c
./test/external.c
./test/gheap.c
Added H5F_ACC_DEBUG so we can see cache performance
statistics.
----------------------
./src/H5Bprivate.h
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5Gpkg.h
./src/H5MF.c
./src/H5P.c
./src/H5Ppublic.h
./test/big.c
./html/Big.html
./html/Files.html
Family members can now be any size >1kB. Got rid of some
places where we were reading a property list after it was
closed.
./MANIFEST
./src/Makefile.in
./src/h5repart.c
A program to repartition file families. The source and/or
destination may be files or file families. Examples:
testhdf5 -c -o stab
h5repart -m 1m tstab2.h5 x%05d.h5
h5repart -m 100k x%05d.h5 y%05d.h5
h5repart y%05d.h5 z.h5
diff tstab2.h5 z.h5
./src/h5ls.c
Added a usage message, replaced assertions with error
messages.
./config/linux
Made a warning message more obvious. Added better
optimization flags for Pentium-Pro's.
./src/H5F.c
./src/H5G.c
./src/H5O.c
./src/H5Osdspace.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Z.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/istore.c
Now that I have a home-grown version of Purify I fixed all the
leaks in all the test files.
----------------------
./src/H5A.c
./src/H5T.c
Fixed memory leaks. More to come later but PureAtria doesn't
make a Linux version of purify and the free version doesn't
compile with the new SMP Linux kernels so I had to debug over
the internet on a day that Sprint seemed to be having routing
problems... oh well. I got rid of most of the leaks.
./src/H5Apublic.h
Includes H5Ipublic.h for types in the header file.
./src/H5O.c
Comments improved for H5O_read()
./test/tattr.c
Removed a non-ANSI empty initializer.
./test/dsets.c
Include <string.h>
./test/istore.c
Fixed a non-ANSI pointer conversion.
----------------------
./bin/release
./src/H5.c
./src/H5private.h
./src/H5public.h
./src/H5Fpublic.h
Changed the version number constants to names that begin with
H5_VERS_ and added macros that check that the version numbers
in the include files match the version number of the library.
./MANIFEST
./html/H5.user.html
./html/Version.html [NEW]
./html/version.obj [NEW]
./html/version.gif [NEW]
Documented version numbers and the macros, constants, and
functions associated with them.
./bin/versinc
A perl script that increments the minor version number and
sets the patch level back to zero. This is intended to be
invoked from the top of the source tree by a cvs commit
anywhere in the source tree. Quincey?
./src/H5O.c
./src/H5Oprivate.h
Added H5O_count() to count the number of object header
messages of a particular type. Quincey needs this for the
attribute package.
./test/dsets.c
Fixed warnings. Enabled the small strip-mine buffer test.
./config/linux
Added optimizations for the Pentium-Pro for production mode.
----------------------
This checkin completes the compression stuff almost two weeks ahead of
schedule. It should now all be working and documented.
./Makefile.in
./config/commence.in
A distclean causes the distribution makefile to be copied to
Makefile again.
./src/H5D.c
Opening a compressed dataset now works properly.
./src/H5P.c
./src/H5Ppublic.h
The H5Pset_compression() and H5Pget_compression() now work as
documented.
./src/H5T.c
Fixed a bug that causes the library to crash sometimes if
debugging is turned on for the `t' package.
./src/H5Z.c
Fixed a bug where the number of bytes attributed to
compression overruns was too low in the debugging output.
./test/dsets.c
More compression tests: reading of uninitialized data, opening
an existing dataset and reading it, partial I/O which isn't
aligned on chunk boundaries, and use of application-defined
compression methods.
./MANIFEST
Removed ./test/dspace.c.
----------------------
./html/Compression.html [NEW]
./html/Datasets.html
./html/H5.format.html
./html/H5.user.html
Documented compression. A couple of the H5P functions aren't
quite implemented yet but they're coming soon...
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocomp.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c [NEW]
./src/H5Zprivate.h [NEW]
./src/H5Zpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/dsets.c
./test/istore.c
Compression is now mostly working. Don't try to open a
compressed dataset though because the compression message
won't be read.
./html/Datatypes.html
./html/H5.api.html
./src/H5.c
./src/H5private.h
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added timing support. When compiled with H5T_DEBUG defined
the library will print conversion bandwidths when the library
closes. The H5Tregister functions take a string as the first
argument so the statistics output is meaningful.
./MANIFEST
Added new files.
./configure.in
./src/H5config.h.in
Check for getrusage(). Check for compress2() in libz.a and
the zlib.h header file. Added `z' to the debug list.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
./src/debug.c
Cleaned up some indentation and added support to print istore
B-trees. From the debugger, give the B-tree address and the
dimensionality from the layout message of the object header.
./src/h5ls.c
The oid is printed as w❌y:z where w and x are the file ID
and y and z are the OID within the file. You can give z or
y*2^32+z as an argument to the debugger to print the object
header for the object.
./src/H5AC.c
Cleaned up statistics and made them match those reported by
H5T and H5Z.
./src/H5MM.c
./src/H5MMprivate.h
./src/H5Fistore.c
Finally got rid of a couple of long-standing const cast
warnings.
----------------------
./html/H5.format.html
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gprivate.h
./src/h5ls.c
./test/Makefile.in
Symbolic links are now supported. The ./test/links program
will create a `links.h5' file that demonstrates hard links,
soft links, dangling links, and recursive links. A symbolic
link is a symbol table entity and doesn't have an object
header. It's format is described in H5.format.hml.
./src/H5G.c
./src/H5Gpublic.h
./src/h5ls.c
Implemented H5Gstat() and H5Gget_linkval() as documented by
Quincey. The `H5G_type_t type' field of `H5G_stat_t' was
changed to `int type' because H5G_type_t was already used and
the `type' data type should be open-ended.
./src/H5Ffamily.c
Removed an incorrect diagnostic message.
./test/big.c
Added read/write calls to test partial I/O to big contiguous
datasets. With no arguments it writes to a dataset and prints
the list of points written which should be redirected to a
file. With an argument (the name of a file containing the
stdout of a run with no arguments) values are read from the
dataset. One would typically say `big >x && big x'.
----------------------
./src/H5Osdspace.c
./html/H5.format.html
In the past we were allowed to have >2GB files on a 32-bit
machine as long as no dataset within the file was larger than
4GB (or whatever sizeof(size_t) is). That's been fixed now.
All dataset size calculations are done with `hsize_t' which is
normally defined as `unsigned long long'.
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
The file family member size can now be set/queried. The
default is still 64MB, but it can be set to 1GB by saying:
H5Pset_family (plist, 30, H5P_DEFAULT);
When opening an existing file family the specified
bits-per-member is ignored and the first member of the family
determines the bits-per-member, which can be retrieved with
H5Pget_family().
./acconfig.h
./configure.in
./src/H5config.h
./src/H5public.h
Added `--disable-hsizet' so that those with old GCC compilers
(<2.8.1) can still compile the code.
./src/H5.c
./src/H5private.h
Added HDfprintf() which works just like fprintf() except you
can give `H' as a size modifier for the integer conversions
and supply an `hsize_t' or `hssize_t' argument without casting
it. For instance:
hsize_t npoints = H5Sget_npoints(space);
HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n",
npoints, npoints);
You can now give `%a' as a format to print an address, but all
formating flags are ignored and it causes the return value of
HDfprintf() to not include the characters in the address (but
who uses the return value anyway :-). Example:
H5G_t *grp;
HDfprintf(stdout, "Group object header at %a\n",
&(grp->ent.header));
Added HDstrtoll() which works exactly like [HD]strtol() except
the result is an int64.
./src/debug.c
Large addresses can now be entered from the command-line. Use
either decimal, octal (leading `0') or hexadecimal (leading
`0x') when giving the address.
./src/h5ls.c
The printf format for dataset dimensions was changed to `%Hu'
to support large datasets.
./test/big.c [NEW]
A test for big datasets on 32-bit machines. This test is not
run by default. Don't try to run it on an nfs-mounted file
system or other file system that doesn't support holes because
it creates two 32GB datasets of all zero.
----------------------
./src/H5B.c
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5S.c
./src/H5Sprivate.h
./src/H5Spublic.h
./src/H5Ssimp.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5private.h
./src/H5public.h
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tfile.c
./test/th5s.c
Anything having to do with the size of a dataset now uses the
types `hsize_t' and `hssize_t' which must be the same size and
at least as large as `size_t'. This isn't fully tested yet,
so hsize_t and hssize_t are defined as size_t and ssize_t in
H5public.h. Setting them to larger values will trip up gcc
versions less than 2.8.1 on x86 platforms.
Documented unused function formals with `__unused__' before
the formal name. This also has the effect of supressing
warning messages for gcc since it's defined to be
`__attribute__((unused))' in the H5private.h file.
./src/debug.c
./src/h5ls.c
If the file name contains a `%' then the file is opened as a
file family with H5P_DEFAULT for the file member access
property list.
./src/h5ls.c
The group name is optional, defaulting to `/'.
./src/hdf5.h
Added some missing public header files.
----------------------
./configure.in
Moved setting of compiler warning switches earlier in the file.
Turned on more warning switches to gcc.
./config/linux
Prints a warning if the gcc version is less than 2.8.1 since
that version has problems with register allocation for `long
long'.
./html/Datatypes.html
Documented sharing of data types between datasets.
./src/H5G.c
./src/H5Gpublic.h
Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard
links. Still have soft links to do.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5D.c
./src/H5E.c
./src/H5Eprivate.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5HLprivate.h
./src/H5I.c
./src/H5Iprivate.h
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5Ssimp.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5detect.c
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tstab.c
Fixed comparisons between signed and unsigned values. Fixed
warnings about unused function arguments.
----------------------
./MANIFEST
./test/Makefile.in
./test/shtype.c [NEW]
Added some tests for shared data types.
./configure.in
Removed MF and HL from the default debug list since. MF
because it hasn't been implemented yet and HL because it
produces lots of annoying messages about adjusting the size of
local heaps.
./src/H5F.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug with opening the same file twice. The first close
on the file_id incorrectly closed shared data structs.
Closing a file now correctly unshares data types that might be
pointing into that file.
./src/H5T.c
./src/H5Tpublic.h
Added an H5Tis_shared(). The caller supplies a file and a
data type and the function returns true if the data type is
currently marked for sharing in that file.
./src/H5AC.c
./src/H5F.c
./src/H5HL.c
./src/H5HG.c
./src/H5MF.c
./src/H5O.c
We now detect errors sooner when writing to a read-only
file. In the past, the error might not show up until the
cached item was flushed, and it was sometimes possible to not
even get an error!
./src/H5I.c
./src/H5Iprivate.h
If the search function fails then H5I_search() returns
failure. Also, the first argument for the search function
isn't const anymore because we might want the search to have
side effects (like calling H5T_unshare() for all shared data
types whose file just closed).
----------------------
./MANIFEST
./src/Makefile.in
./test/Makefile.in
Added new files.
./config/linux
./src/H5HL.c
./src/H5HLprivate.h
./src/H5MF.c
./src/H5MFprivate.h
Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list.
./html/H5.format.html
Updated shared object message information.
./src/H5D.c
Datasets can now share data types.
./src/H5F.c
Updated a comment that referred to H5ACC_WRITE.
./src/H5HG.c
./src/H5HGprivate.h
Moved a few things around. Made debugging better so you can
now give a collection address to ./src/debug and it shows some
useful stuff.
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c [NEW]
./src/H5Ostab.c
Supports shared messages.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
The H5Tshare() function allows the user to give the library
hints about how a data type will be used.
./test/shtype.c
Tests the H5Tshare() function.
./test/gheap.c
Tests the global heap.
./configure.in
./config/BlankForm [NEW]
./config/alpha-dec
./config/freebsd2.2.1
./config/hpux10.20
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
Cleaned up lots of configuration stuff and made the site
configuration files lots easier and more uniform. To make a
new file grab the BlankForm and modify it.
By default, debugging is turned on for most packages. Within
a package one can use `#ifdef H5AC_DEBUG' to wrap debugging
code. Other options are:
--enable-debug
--enable-debug=yes
The default, most but not all packages.
--disable-debug
--enable-debug=no
--enable-debug=none
The symbol NDEBUG is defined and none of the package
debug symbols.
--enable-debug=all
Debugging is turned on for all packages. This might
produce lots of output.
--enable-debug=g,d
Debugging is turned on for H5G and H5D.
A compile mode is also now supported
--enable-production
--enable-production=yes
The library is compiled with optimizations turned on.
The compiler flags are augmented by adding PROD_CFLAGS
and PROD_CPPFLAGS which are defined in the site config
file.
--disable-production
--enable-production=no
The default. The library is compiled for development
by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in
the site config file. This is usually just `-g'.
--enable-production=profile
--enable-production=pg
Builds a library for profiling by including the flags
from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the
site config file. This is usullay just `-pg' but it
could include optimization flags as well depending on
the type of profile one wants.
In summary, configure by saying `./configure' and you'll get a
development version of the library. Configure by saying
`./configure --enable-production --disable-debug' and you'll
get a production version with no debugging code.
----------------------
./MANIFEST
./src/H5HG.c [new]
./src/H5HGprivate.h [new]
./src/H5HGpublic.h [new]
./src/Makefile.in
Added global heaps, H5HG. This compiles but is untested.
./src/H5D.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5HL.c [renamed from H5H.c]
./src/H5HLprivate.h [renamed from H5Hprivate.h]
./src/H5HLpublic.h [renamed from H5Hpublic.h]
./src/H5Oefl.c
./src/Makefile.in
./src/hdf5.h
./test/theap.c
Renamed local heaps from H5H to H5HL.
./src/H5AC.c
./src/H5ACprivate.h
./src/debug.c
Added debugging support for global heap collections.
./html/H5.format.html
Ripped out the old small object heap documentation and added
documentation for the new global heap.
./html/H5.api.html
./src/H5P.c
./src/H5Ppublic.h
./src/H5F.c
./src/H5Fprivate.h
./src/H5private.h
The H5Pget_version() function no longer returns a small object
heap version number. Instead, each collection of the global
heap has its own version number instead of a single number in
the file boot block.
./bin/release
Omit files marked for removal by CVS even though the removal
hasn't been committed yet.
./test/iopipe.c
Removed warnings about casting unsigned int to double on Irix64.
./MANIFEST
Removed ./test/testpar/phdf5sup.c
----------------------
./src/H5D.c
Zero element requests for H5Dread() and H5Dwrite() succeed.
./src/H5F.c
./src/H5Fprivate.h
All files will have a root group. This greatly simplifies the
library at the expense of ~1k extra bytes in files that have
only one object.
./src/H5D.c
./src/H5Dprivate.h
./html/Groups.html
Functions that used to take a file ID and an object name can
now take a group ID instead of a file ID. This doesn't change
the API, only it's documentation.
./src/H5G.c
./src/H5Gprivate.h
./src/H5O.c
./src/H5Oprivate.h
Removed extra file arguments from some internal functions
since the file pointer can be found from the group pointer or
a symbol table entry (ent->file or H5G_fileof(group)).
Besides, when we eventually implement mounting one file on
another, H5G_namei() might return a different file than what
you gave it, and that file is part of the returned symbol
table entry.
./src/H5G.c
Fixed bug with `.' appearing in a name. It used to hang the
library.
./src/Makefile.in
./src/h5ls.c [NEW]
./MANIFEST
Added `h5ls' a simple program that takes a file name and a
directory and lists the contents of that directory using
H5Giterate().
./test/istore.c
Changed an argument to H5G_create().
./test/tstab.c
Removed test_1 which was testing that files with a single
object don't have a root group. This no longer applies.
----------------------
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gpublic.h
./src/H5Gstab.c
Implemented H5Giterate(). However, since most functions can't
take a group ID in place of a file ID yet, there's not a whole
lot that the operator can do besides print the name or something.
./test/H5O.c
Fixed writing of four uninitialized bytes to the file as part
of an object header.
./test/istore.c
For some reason, `mpirun -np 1 istore' results in extra
arguments on the command line that istore doesn't understand.
I'm probably forgetting to call some MPI function in
main(). Albert, Kim? So I commented out the `exit(1)' for the
time being.
----------------------
./MANIFEST
./configure.in
./configure
./Makefile.in
./bin/distdep [NEW]
./config/conclude.in
./config/depend.in
./src/.distdep [NEW]
./test/.distdep [NEW]
Added some code so non-GNU systems have a list of dependencies
between the .c files and the .h files. Hopefully this works
and y'all don't have to keep saying `make clean' each time you
change a header.
On systems with GNU make, GCC, and Perl, the dependency
information is generated automatically from rules in
config/depend.in as has always been done. But now extra files
called `.distdep' (for `distributable dependencies) are left
in each directory and these are part of CVS and thus
releases. (A `make dep' will create dependencies on demand
without doing anything else.)
On systems lacking one or more of the tools above, the various
`.distdep' files are inserted into the end of the Makefiles.
If you do developement on one of these systems you'll have to
update the `.distdep' and/or Makefile by hand, or wait until
you have access to a GNU system and do a `make dep'.
----------------------
./src/H5D.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug found by Kevin Powell regarding preservation of
existing data during a read or write when the source and
destination data types are the same. Thanks Kevin!
Fixed a couple warnings on Irix64.
./src/H5D.c
./src/H5Dprivate.h
./src/H5P.c
./src/H5Ppublic.c
./src/H5Tconv.c
./src/H5Tpublic.h
./test/cmpd_dset.c
The application can now turn on/off the part of the I/O
pipeline that deals with preservation of initialized data.
The default is off since this will be the usual case and
turning it on slows down the pipe. Use H5Pset_preserve() and
H5Pget_preserve().
./src/H5Fistore.c
Added an optimization for reading/writing a single chunk of
chunked storage.
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Ostab.c
Fixed warnings reported by marek@iiasa.ac.at. Thanks Marek.
./src/H5Odtype.c
Fixed a failing assert() wrt reading compound types (not
present in hdf5-1.0.0a).
